July 2013 - Freeradius-Users - lists.freeradius.org

Detailed Logging freeradius Request Packets
by Jean-Francois Mousinho 28 Oct '19

28 Oct '19

Hi, I've tried to find a way of detail logging the packets sent by freeradius to the client in the authentication phase but didn't found a way of doing it. Maybe I've not looked correctly so I'm asking if it's actually possible? I was able to log detailed packets sent by the client (Response packets) but not the ones sent by freeradius to the client (except accounting and proxied ones). Thanks for your time. Jean-François Mousinho

4 6

user-group for rejected users
by Fabricio Viana 21 Mar '17

21 Mar '17

Hello! Let´s suppose the following situations: 1) User exists but the password is wrong 2) User does not exist In both cases the answer is REJECT. It happens that certain hardware is making endless attempts that eventually saturating the server. - It is possible to cause the server, instead of rejecting the users, accept the login but responds ACCEPT with "framed-pool = pool-block" ? or/and - Is there any way to put REJECT users in a given group by default? Thanks! Fabricio

3 3

AVP EAP-KEY name support in FR
by Srinu Bandari 12 May '14

12 May '14

Hi, We are trying to bring up MACsec with Cisco and FR, and we are stuck because of Radius unable to send EAP-Key-Name AVP. Below is what is expected as per RFC4072 RFC4072 says "A home Diameter server receiving a Diameter-EAP-Request with a Key-Name AVP with non-empty data MUST silently discard the AVP. In addition, the home Diameter server SHOULD include this AVP in Diameter-EAP-Response only if an empty EAP-Key-Name AVP was present in Diameter-EAP-Request." But radius server is not sending EAP-Key-Name AVP (Radius Attribute Type 102) even invalid AVP present in the Diameter-EAP-Request". Below is the debug print of radius Sending Access-Accept of id 647 to 10.20.64.9 port 1645 MS-MPPE-Recv-Key = 0x84e5c624c3bcdeadca3c6210f24bd7b8336921ccc1c58399d397afc75770332c MS-MPPE-Send-Key = 0xa6c4860cc8092c251502f5adc3ee13586e05fe84cbbb8b6793b08d9523d12b1f EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "user1" Does anyone have clue on this. Thanks, Srinivas CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

4 19

authorization based on ldap attribute
by Stefano Zanmarchi 29 Apr '14

29 Apr '14

Hallo, I've configured freeradius to authenticate users with PEAP, using openldap to store NTLM hashes. It works fine. Now I'd like to authorize only people who have the ldap attribute "haDirittoEduroam" set to Y (or the other way round: not to authorize users with "haDirittoEduroam" set to N). Below an example openldap entry. Is there an easy way to achive this? dn: uid=uto.ughi(a)myorg.it,dc=myorg,dc=it objectClass: sambaSamAccount objectClass: inetOrgPerson objectClass: person objectClass: dirittoEduroam cn: Uto sn: Ughi uid: uto.ughi(a)myorg.it haDirittoEduroam: N sambaSID: 121212 userPassword: {SSHA}EnK9jqiVGSPNi6EQwpqdpjThBJHtZ1fi sambaNTPassword: 2B466E3D3FB6AA4BF8AAAFEF8F59F6F3 sambaLMPassword: E52CAC67419A9A224300941ECC02054C thanks a lot for your help, Stefano

4 6

Re: SSL V3 client certificate error
by Danny Kurniawan 05 Nov '13

05 Nov '13

thank you so much .. yes it only have issue intermitenly on some user .. so i have to set our client laptop manually for the root CA? I believe it should be there as we use Global Sign ... -- Best Regards, Danny

2 1

Radperf unavailable?
by Marius Booysen 30 Oct '13

30 Oct '13

Hi, I see that there is a problem downloading Radperf from networkradius.com. Does anybody know if it will become available once again at some point? Are there any other benchmarking utilities for Freeradius? Regards Kosie

5 4

Fwd: radiusclient-ng in Debian
by Daniel Pocock 02 Sep '13

02 Sep '13

I just opened this report against radiusclient-ng in Debian (see below), can anybody else comment on the situation, in particular, for compatibility? Is there any urgency for Debian to update to the new client code? I think the wiki page referenced below is not up to date, it refers to a CVS repository but it appears that the client code is not in github Also, is anybody aware of C++ wrappers for this code or a C++ alternative? -------- Original Message -------- Subject: radiusclient-ng in Debian Date: Mon, 15 Jul 2013 14:41:54 +0200 From: Daniel Pocock <daniel(a)pocock.com.au> To: Debian Bug Tracking System <submit(a)bugs.debian.org> Package: libradiusclient-ng2 Version: 0.5.6-1.1 Severity: normal I've just read through the wiki at: http://wiki.freeradius.org/glossary/Radiusclient If I understand correctly, a) freeradius-client is the continuation of radiusclient-ng (which was the continuation of a previous project) b) it is not a fork of the previous projects c) it should be compatible (or almost compatible) with code that was built for radiusclient-ng d) it is NOT built from the main FreeRADIUS source tree or repository, it is built from a standalone repository Therefore, this leaves me feeling that Debian should drop the libradiusclient-ng2 package and distribute FreeRADIUS client instead and there will be no significant side-effects of doing so.

3 6

client code for long extended attributes?
by Daniel Pocock 02 Sep '13

02 Sep '13

Can anybody comment on which client code should be used for long extended attributes? I see that the freeradius-client project predates RFC 6929. Is there any module in the server project that provides a good example of using these long values from requests?

2 5

SQL-Relay log - radacctdir - High Disk usage
by Alisson 06 Aug '13

06 Aug '13

Hi, I have a high disk utilization because the SQL-RELAY Log. I have this var: radacctdir whats the objetive to keep this log? can I disable it? radacctdir = /var/log/radius/radacct thank you

2 6

Diffrent authentication based by SSID
by Marcin 05 Aug '13

05 Aug '13

Hi. I'm new with FreeRadius. I would like to use FreeRadius to authenticate two groups of users. One group for local staff based on eap-tls, second group to others based on OpenLdap authentication. My AP's have 2 SSID's broadcasting. One for the staff, second for others. Is there a possibility, to use one radius server to handle this scenario? Regards Marcin

3 4