May 2014 - Freeradius-Users - lists.freeradius.org

AVP EAP-KEY name support in FR
by Srinu Bandari 12 May '14

12 May '14

Hi, We are trying to bring up MACsec with Cisco and FR, and we are stuck because of Radius unable to send EAP-Key-Name AVP. Below is what is expected as per RFC4072 RFC4072 says "A home Diameter server receiving a Diameter-EAP-Request with a Key-Name AVP with non-empty data MUST silently discard the AVP. In addition, the home Diameter server SHOULD include this AVP in Diameter-EAP-Response only if an empty EAP-Key-Name AVP was present in Diameter-EAP-Request." But radius server is not sending EAP-Key-Name AVP (Radius Attribute Type 102) even invalid AVP present in the Diameter-EAP-Request". Below is the debug print of radius Sending Access-Accept of id 647 to 10.20.64.9 port 1645 MS-MPPE-Recv-Key = 0x84e5c624c3bcdeadca3c6210f24bd7b8336921ccc1c58399d397afc75770332c MS-MPPE-Send-Key = 0xa6c4860cc8092c251502f5adc3ee13586e05fe84cbbb8b6793b08d9523d12b1f EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "user1" Does anyone have clue on this. Thanks, Srinivas CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

4 19

Re: rlm_sqlcounter: Max-Daily-Session.
by * 12 May '14

12 May '14

Thank you for your reply. Here is my radius -X > radiusd: FreeRADIUS Version 3.0.1, for host x86_64-pc-linux-gnu, built on Apr 15 2014 at 14:04:23 > > Copyright (C) 1999-2014 The FreeRADIUS server project and contributors > > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > > PARTICULAR PURPOSE > > You may redistribute copies of FreeRADIUS under the terms of the > > GNU General Public License > > For more information about these matters, see the file named COPYRIGHT > > Starting - reading configuration files ... > > including dictionary file /etc/freeradius/dictionary > > including configuration file /etc/freeradius/radiusd.conf > > including configuration file /etc/freeradius/proxy.conf > > including configuration file /etc/freeradius/clients.conf > > including files in directory /etc/freeradius/mods-enabled/ > > including configuration file /etc/freeradius/mods-enabled/eap > > including configuration file /etc/freeradius/mods-enabled/always > > including configuration file /etc/freeradius/mods-enabled/dynamic_clients > > including configuration file /etc/freeradius/mods-enabled/detail.log > > including configuration file /etc/freeradius/mods-enabled/detail > > including configuration file /etc/freeradius/mods-enabled/sradutmp > > including configuration file /etc/freeradius/mods-enabled/expiration > > including configuration file /etc/freeradius/mods-enabled/preprocess > > including configuration file /etc/freeradius/mods-enabled/logintime > > including configuration file /etc/freeradius/mods-enabled/soh > > including configuration file /etc/freeradius/mods-enabled/dhcp > > including configuration file /etc/freeradius/mods-enabled/radutmp > > including configuration file /etc/freeradius/mods-enabled/digest > > including configuration file /etc/freeradius/mods-enabled/exec > > including configuration file /etc/freeradius/mods-enabled/echo > > including configuration file /etc/freeradius/mods-enabled/replicate > > including configuration file /etc/freeradius/mods-enabled/cache_eap > > including configuration file /etc/freeradius/mods-enabled/linelog > > including configuration file /etc/freeradius/mods-enabled/utf8 > > including configuration file /etc/freeradius/mods-enabled/attr_filter > > including configuration file /etc/freeradius/mods-enabled/chap > > including configuration file /etc/freeradius/mods-enabled/realm > > including configuration file /etc/freeradius/mods-enabled/passwd > > including configuration file /etc/freeradius/mods-enabled/ntlm_auth > > including configuration file /etc/freeradius/mods-enabled/sql > > including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf > > including configuration file /etc/freeradius/mods-enabled/sqlcounter > > including configuration file /etc/freeradius/mods-enabled/pap > > including configuration file /etc/freeradius/mods-enabled/perl > > including configuration file /etc/freeradius/mods-enabled/files > > including configuration file /etc/freeradius/mods-enabled/expr > > including configuration file /etc/freeradius/mods-enabled/unix > > including configuration file /etc/freeradius/mods-enabled/mschap > > including files in directory /etc/freeradius/policy.d/ > > including configuration file /etc/freeradius/policy.d/eap > > including configuration file /etc/freeradius/policy.d/cui > > including configuration file /etc/freeradius/policy.d/operator-name > > including configuration file /etc/freeradius/policy.d/dhcp > > including configuration file /etc/freeradius/policy.d/control > > including configuration file /etc/freeradius/policy.d/filter > > including configuration file /etc/freeradius/policy.d/canonicalization > > including configuration file /etc/freeradius/policy.d/accounting > > including files in directory /etc/freeradius/sites-enabled/ > > including configuration file /etc/freeradius/sites-enabled/inner-tunnel > > including configuration file /etc/freeradius/sites-enabled/default > > main { > > security { > > user = "freerad" > > group = "freerad" > > allow_core_dumps = no > > } > > } > > main { > > name = "freeradius" > > prefix = "/usr" > > localstatedir = "/var" > > sbindir = "/usr/sbin" > > logdir = "/var/log/freeradius" > > run_dir = "/var/run/freeradius" > > libdir = "/usr/lib/freeradius" > > radacctdir = "/var/log/freeradius/radacct" > > hostname_lookups = no > > max_request_time = 30 > > cleanup_delay = 5 > > max_requests = 1024 > > pidfile = "/var/run/freeradius/freeradius.pid" > > checkrad = "/usr/sbin/checkrad" > > debug_level = 0 > > proxy_requests = no > > log { > > stripped_names = no > > auth = no > > auth_badpass = no > > auth_goodpass = no > > colourise = yes > > } > > security { > > max_attributes = 200 > > reject_delay = 1 > > status_server = yes > > } > > } > > radiusd: #### Loading Realms and Home Servers #### > > proxy server { > > retry_delay = 5 > > retry_count = 3 > > default_fallback = no > > dead_time = 120 > > wake_all_if_all_dead = no > > } > > home_server localhost { > > ipaddr = 127.0.0.1 > > port = 1812 > > type = "auth" > > secret = "testing123" > > response_window = 20 > > max_outstanding = 65536 > > zombie_period = 40 > > status_check = "status-server" > > ping_interval = 30 > > check_interval = 30 > > num_answers_to_alive = 3 > > revive_interval = 120 > > status_check_timeout = 4 > > coa { > > irt = 2 > > mrt = 16 > > mrc = 5 > > mrd = 30 > > } > > limit { > > max_connections = 16 > > max_requests = 0 > > lifetime = 0 > > idle_timeout = 0 > > } > > } > > home_server_pool my_auth_failover { > > type = fail-over > > home_server = localhost > > } > > realm example.com { > > auth_pool = my_auth_failover > > } > > realm LOCAL { > > } > > radiusd: #### Loading Clients #### > > client localhost { > > ipaddr = 127.0.0.1 > > require_message_authenticator = no > > secret = "radius" > > shortname = "localhost" > > nas_type = "other" > > proto = "*" > > limit { > > max_connections = 16 > > lifetime = 0 > > idle_timeout = 30 > > } > > } > > client 27.33.228.125 { > > require_message_authenticator = no > > secret = "radius" > > shortname = "14kimberleyst" > > nas_type = "mikrotik" > > limit { > > max_connections = 16 > > lifetime = 0 > > idle_timeout = 30 > > } > > } > > client 220.244.108.10 { > > require_message_authenticator = no > > secret = "radius" > > shortname = "30cookst" > > nas_type = "mikrotik_snmp" > > limit { > > max_connections = 16 > > lifetime = 0 > > idle_timeout = 30 > > } > > } > > client 10.1.1.22/24 { > > require_message_authenticator = no > > secret = "radius" > > shortname = "MikroTik" > > limit { > > max_connections = 16 > > lifetime = 0 > > idle_timeout = 30 > > } > > } > > client 99hamilton.no-ip.biz { > > require_message_authenticator = no > > secret = "radius" > > shortname = "99hamilton" > > nas_type = "mikrotik" > > limit { > > max_connections = 16 > > lifetime = 0 > > idle_timeout = 30 > > } > > } > > radiusd: #### Instantiating modules #### > > instantiate { > > } > > modules { > > # Loaded module rlm_eap > > # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap > > eap { > > default_eap_type = "md5" > > timer_expire = 60 > > ignore_unknown_eap_types = no > > mod_accounting_username_bug = no > > max_sessions = 4096 > > } > > # Linked to sub-module rlm_eap_md5 > > # Linked to sub-module rlm_eap_leap > > # Linked to sub-module rlm_eap_gtc > > gtc { > > challenge = "Password: " > > auth_type = "PAP" > > } > > # Linked to sub-module rlm_eap_tls > > tls { > > tls = "tls-common" > > } > > tls-config tls-common { > > rsa_key_exchange = no > > dh_key_exchange = yes > > rsa_key_length = 512 > > dh_key_length = 512 > > verify_depth = 0 > > ca_path = "/etc/freeradius/certs" > > pem_file_type = yes > > private_key_file = "/etc/freeradius/certs/server.pem" > > certificate_file = "/etc/freeradius/certs/server.pem" > > ca_file = "/etc/freeradius/certs/ca.pem" > > private_key_password = "whatever" > > dh_file = "/etc/freeradius/certs/dh" > > fragment_size = 1024 > > include_length = yes > > check_crl = no > > cipher_list = "DEFAULT" > > ecdh_curve = "prime256v1" > > cache { > > enable = yes > > lifetime = 24 > > max_entries = 255 > > } > > verify { > > } > > ocsp { > > enable = no > > override_cert_url = yes > > url = "http://127.0.0.1/ocsp/" > > use_nonce = yes > > timeout = 0 > > softfail = yes > > } > > } > > # Linked to sub-module rlm_eap_ttls > > ttls { > > tls = "tls-common" > > default_eap_type = "md5" > > copy_request_to_tunnel = no > > use_tunneled_reply = no > > virtual_server = "inner-tunnel" > > include_length = yes > > require_client_cert = no > > } > > Using cached TLS configuration from previous invocation > > # Linked to sub-module rlm_eap_peap > > peap { > > tls = "tls-common" > > default_method = "mschapv2" > > copy_request_to_tunnel = no > > use_tunneled_reply = no > > proxy_tunneled_request_as_eap = yes > > virtual_server = "inner-tunnel" > > soh = no > > require_client_cert = no > > } > > Using cached TLS configuration from previous invocation > > # Linked to sub-module rlm_eap_mschapv2 > > mschapv2 { > > with_ntdomain_hack = no > > send_error = no > > } > > # Loaded module rlm_always > > # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always > > always fail { > > rcode = "fail" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always > > always reject { > > rcode = "reject" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always > > always noop { > > rcode = "noop" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always > > always handled { > > rcode = "handled" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always > > always updated { > > rcode = "updated" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always > > always notfound { > > rcode = "notfound" > > simulcount = 0 > > mpp = no > > } > > # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always > > always ok { > > rcode = "ok" > > simulcount = 0 > > mpp = no > > } > > # Loaded module rlm_dynamic_clients > > # Instantiating module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients > > # Loaded module rlm_detail > > # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log > > detail auth_log { > > filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" > > header = "%t" > > permissions = 384 > > dir_permissions = 493 > > locking = no > > log_packet_header = no > > } > > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output > > # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log > > detail reply_log { > > filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" > > header = "%t" > > permissions = 384 > > dir_permissions = 493 > > locking = no > > log_packet_header = no > > } > > # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log > > detail pre_proxy_log { > > filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" > > header = "%t" > > permissions = 384 > > dir_permissions = 493 > > locking = no > > log_packet_header = no > > } > > # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log > > detail post_proxy_log { > > filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" > > header = "%t" > > permissions = 384 > > dir_permissions = 493 > > locking = no > > log_packet_header = no > > } > > # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail > > detail { > > filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" > > header = "%t" > > permissions = 384 > > dir_permissions = 493 > > locking = no > > log_packet_header = no > > } > > # Loaded module rlm_radutmp > > # Instantiating module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp > > radutmp sradutmp { > > filename = "/var/log/freeradius/sradutmp" > > username = "%{User-Name}" > > case_sensitive = yes > > check_with_nas = yes > > permissions = 420 > > caller_id = no > > } > > # Loaded module rlm_expiration > > # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration > > # Loaded module rlm_preprocess > > # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess > > preprocess { > > huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" > > hints = "/etc/freeradius/mods-config/preprocess/hints" > > with_ascend_hack = no > > ascend_channels_per_line = 23 > > with_ntdomain_hack = no > > with_specialix_jetstream_hack = no > > with_cisco_vsa_hack = no > > with_alvarion_vsa_hack = no > > } > > reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups > > reading pairlist file /etc/freeradius/mods-config/preprocess/hints > > # Loaded module rlm_logintime > > # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime > > logintime { > > minimum_timeout = 60 > > } > > # Loaded module rlm_soh > > # Instantiating module "soh" from file /etc/freeradius/mods-enabled/soh > > soh { > > dhcp = yes > > } > > # Loaded module rlm_dhcp > > # Instantiating module "dhcp" from file /etc/freeradius/mods-enabled/dhcp > > # Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp > > radutmp { > > filename = "/var/log/freeradius/radutmp" > > username = "%{User-Name}" > > case_sensitive = yes > > check_with_nas = yes > > permissions = 384 > > caller_id = yes > > } > > # Loaded module rlm_digest > > # Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest > > # Loaded module rlm_exec > > # Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec > > exec { > > wait = no > > input_pairs = "request" > > shell_escape = yes > > timeout = 10 > > } > > # Instantiating module "echo" from file /etc/freeradius/mods-enabled/echo > > exec echo { > > wait = yes > > program = "/bin/echo %{User-Name}" > > input_pairs = "request" > > output_pairs = "reply" > > shell_escape = yes > > } > > # Loaded module rlm_replicate > > # Instantiating module "replicate" from file /etc/freeradius/mods-enabled/replicate > > # Loaded module rlm_cache > > # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap > > cache cache_eap { > > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" > > ttl = 15 > > max_entries = 16384 > > epoch = 0 > > add_stats = no > > } > > # Loaded module rlm_linelog > > # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog > > linelog { > > filename = "/var/log/freeradius/linelog" > > permissions = 384 > > format = "This is a log message for %{User-Name}" > > reference = "%{%{Packet-Type}:-format}" > > } > > # Loaded module rlm_utf8 > > # Instantiating module "utf8" from file /etc/freeradius/mods-enabled/utf8 > > # Loaded module rlm_attr_filter > > # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter > > attr_filter attr_filter.post-proxy { > > filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" > > key = "%{Realm}" > > relaxed = no > > } > > reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy > > # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter > > attr_filter attr_filter.pre-proxy { > > filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" > > key = "%{Realm}" > > relaxed = no > > } > > reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy > > # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter > > attr_filter attr_filter.access_reject { > > filename = "/etc/freeradius/mods-config/attr_filter/access_reject" > > key = "%{User-Name}" > > relaxed = no > > } > > reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject > > # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter > > attr_filter attr_filter.access_challenge { > > filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" > > key = "%{User-Name}" > > relaxed = no > > } > > reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge > > # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter > > attr_filter attr_filter.accounting_response { > > filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" > > key = "%{User-Name}" > > relaxed = no > > } > > reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response > > # Loaded module rlm_chap > > # Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap > > # Loaded module rlm_realm > > # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm > > realm IPASS { > > format = "prefix" > > delimiter = "/" > > ignore_default = no > > ignore_null = no > > } > > # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm > > realm suffix { > > format = "suffix" > > delimiter = "@" > > ignore_default = no > > ignore_null = no > > } > > # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm > > realm realmpercent { > > format = "suffix" > > delimiter = "%" > > ignore_default = no > > ignore_null = no > > } > > # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm > > realm ntdomain { > > format = "prefix" > > delimiter = "\" > > ignore_default = no > > ignore_null = no > > } > > # Loaded module rlm_passwd > > # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd > > passwd etc_passwd { > > filename = "/etc/passwd" > > format = "*User-Name:Crypt-Password:" > > delimiter = ":" > > ignore_nislike = no > > ignore_empty = yes > > allow_multiple_keys = no > > hash_size = 100 > > } > > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no > > # Instantiating module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth > > exec ntlm_auth { > > wait = yes > > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" > > shell_escape = yes > > } > > # Loaded module rlm_sql > > # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql > > sql { > > driver = "rlm_sql_mysql" > > server = "localhost" > > port = "3306" > > login = "radius" > > password = "fheman" > > radius_db = "radius" > > read_groups = yes > > read_clients = yes > > delete_stale_sessions = yes > > sql_user_name = "%{User-Name}" > > default_user_profile = "" > > client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" > > authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" > > authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" > > authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" > > authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" > > group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" > > simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" > > simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" > > safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" > > } > > accounting { > > reference = "%{tolower:type.%{Acct-Status-Type}.query}" > > } > > post-auth { > > reference = ".query" > > } > > mysql { > > tls { > > } > > } > > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked > > rlm_sql (sql): Attempting to connect to database "radius" > > rlm_sql (sql): Initialising connection pool > > pool { > > start = 5 > > min = 4 > > max = 10 > > spare = 3 > > uses = 0 > > lifetime = 0 > > cleanup_delay = 5 > > idle_timeout = 60 > > spread = no > > } > > rlm_sql (sql): Opening additional connection (0) > > rlm_sql_mysql: Starting connect to MySQL server > > ...

3 3

FR 2.2.5 64 bit
by Mohd Alkhaldi 12 May '14

12 May '14

HI, Can FR 2.2.5 64 bit be compiled on Solaris 10. Thanks; Alwaad Alhaq

4 7

EAP-TTLS session resumption does not work.
by hashimotoku＠nttdata.co.jp 12 May '14

12 May '14

Hello FreeRadius mailing list users. I am using FreeRadius on our WiFi system. I enabled EAP-TTLS session resumption, but it seems the functionality does not work well. - Our system. (a)WiFi supplicant -- (b)WiFi access point -- (c)WiFi Controler -- (d)FreeRadius -- (e)RADIUS server (d) listen on 10.180.4.19:18120. (e) listen on 127.0.0.1:18150. (d) and (e) are installed on the same server. - Authentication Method. Outer authentication: EAP-TTLS Inner authentication: PAP We are using one-time-password on RADIUS server(e) for authentication. - Symptom. (1)[Near the access point A] I input my username and password (authenticate) on supplicant installed in my laptop PC, then I can connect our WiFi network. (2)[Move from the access point A to the access point B] I move my laptop PC. Access point hands over from A to B. (3)[Near the access point B] I lost WiFi connectivity. To connect WiFi again, I have to re-enter username and password. - Wish. I want to resume WiFi connectivity automatically without one-time-password authentication, when I move between WiFi access point. - FreeRadius version. 3.0.1 - Below is our configuration <radiusd.conf>. etcdir = /usr/local/freeradius/etc confdir = ${etcdir}/raddb pidfile = /var/run/radius/freeradius.pid max_requests = 1024 listen { ipaddr = 10.180.4.19 port = 18120 type = auth } authorize { eap } authenticate { eap } post-proxy { eap } server inner-tunnel { authorize { update control { Proxy-To-Realm := "tinyradius" } } authenticate { eap } } modules { eap { default_eap_type = ttls max_sessions = 16384 timer_expire = 120 tls-config tls-common { certsdir = ${confdir}/certs private_key_file = ${certsdir}/our.key certificate_file = ${certsdir}/our.cer dh_file = ${certsdir}/dh cache { enable = yes lifetime = 12 max_entries = 1024 } } ttls { tls = tls-common virtual_server = inner-tunnel } } } client 10.0.0.0/8 { secret = xxxx } realm tinyradius { authhost = 127.0.0.1:18150 secret = xxxx nostrip } log { destination = syslog facility = local1 } Regards. --- Kouki Hashimoto hashimotoku(a)nttdata.co.jp

3 2

RADIUS accounting request not sent: no response
by Osvaldo T Crispim Filho 11 May '14

11 May '14

A few days back here I started getting these messages on mikrotiks: " RADIUS accounting request not sent: no response " Any help? My environment: NAS: RB1100 e RB1100AHx2 NAS: APs Ubiquiti (WPAe EAP PEAP) Server: ubuntu 64 12:04 freeradius 2.1.10+dfsg-3ubuntu0.12.04.2 freeradius-postgresql Messages on freeradius: 00:35:05 hotspot,warning,debug 00:27:22:52:48:5B (1x7.19.xxx.xxx): RADIUS accounting request not sent: no response 00:35:06 hotspot,warning,debug 00:15:6D:F8:D6:2B (1x7.19.xxx.xx): RADIUS accounting request not sent: no response Sat May 10 21:26:30 2014 : Info: ++[preprocess] returns ok Sat May 10 21:26:30 2014 : Info: [acct_unique] WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent Sat May 10 21:26:30 2014 : Info: [acct_unique] WARNING: Attribute Acct-Session-Id was not found in request, unique ID MAY be inconsistent Sat May 10 21:26:30 2014 : Info: [acct_unique] WARNING: Attribute User-Name was not found in request, unique ID MAY be inconsistent -- - Osvaldo T Crispim Filho -

2 3

Re: Freeradius.net Authentication wrong
by Serdar Metin 10 May '14

10 May '14

How can i achieve this? but there is also something else i noticed:for request 4auth: Failed to validate the user.Login incorrect: [bob/<no User-Password attribute>] (from client testing123 port 0 cli 00-1F-3B-B2-F5-09i'm 100 sure this user and some password is beeing saved in the users.conf file

4 5

LDAP for Authorization
by Walter Reynolds 10 May '14

10 May '14

I would like to use LDAP to be able to authorize a user so if there have a certain attribute I can return a radius AVP with a VLAN ID in the access-accept. This would be used for allowing access to licensed library resources. However, I am not sure if I can do this the way my LDAP stuff is set up. The attribute that has the data I need is multi-valued. - StudentAA, StudentDBRN, and StudentFLNT (continuing and incoming students regardless of enrollment; includes detached study); - EnrolledStudentAA, EnrolledStudentDBRN, EnrolledStudentFLNT (enrolled in at least one credit hour for ""current"" term; next term information is used during gap between terms) - AlumniAA, AlumniDBRN, AlumniFLNT (any person who has completed at least one semester in a degree-granting program) - FacultyAA, FacultyDBRN, FacultyFLNT (defined as academic, instructional, and research appointments; includes emeritus faculty) - RegularStaffAA, RegularStaffDBRN, RegularStaffFLNT (current appointment with a status of active, suspended, short-work break, leave, or paid leave); - TemporaryStaffAA, TemporaryStaffDBRN, TemporaryStaffFLNT (current appointment with a status of active, suspended, short-work break, leave, or paid leave) - Retiree (retired from any U-Mcampus, regardless of other appoints that may still be active) - SponsoredAffiliateAA, SponsoredAffiliateDBRN, SponsoredAffiliateFLNT (has at least one departmental sponsorship). However, only 5 of them (StudentAA, EnrolledStudentAA, FacultyAA, RegularStaffAA and TemoraryStaffAA) should get the radius AVP and be allowed access. However, when I query I get something like the following ldapsearch -h ldap.umich.edu -ZZ -z0 -x -D <cut> -b ou=people,dc=umich,dc=edu -LLL -s sub uniqueid=<username> umichinstroles dn: uid=royboy,ou=People,dc=umich,dc=edu umichinstroles: RegularStaffAA umichinstroles: AlumniFLNT So that is not realyy a group membership. Is this something I will be able to do? If not natively can folks mention other options/solutions? ------------------------ Walter Reynolds Principal Systems Security Development Engineer Information and Technology Services University of Michigan (734) 615-9438

2 1

LDAP for defining AVP
by Walter Reynolds 09 May '14

09 May '14

I would like to use LDAP to be able to authorize a user so if there have a certain attribute I can return a radius AVP with a VLAN ID in the access-accept. This would be used for allowing access to licensed library resources. However, I am not sure if I can do this the way my LDAP stuff is set up. The attribute that has the data I need is multi-valued. - StudentAA, StudentDBRN, and StudentFLNT (continuing and incoming students regardless of enrollment; includes detached study); - EnrolledStudentAA, EnrolledStudentDBRN, EnrolledStudentFLNT (enrolled in at least one credit hour for ""current"" term; next term information is used during gap between terms) - AlumniAA, AlumniDBRN, AlumniFLNT (any person who has completed at least one semester in a degree-granting program) - FacultyAA, FacultyDBRN, FacultyFLNT (defined as academic, instructional, and research appointments; includes emeritus faculty) - RegularStaffAA, RegularStaffDBRN, RegularStaffFLNT (current appointment with a status of active, suspended, short-work break, leave, or paid leave); - TemporaryStaffAA, TemporaryStaffDBRN, TemporaryStaffFLNT (current appointment with a status of active, suspended, short-work break, leave, or paid leave) - Retiree (retired from any U-Mcampus, regardless of other appoints that may still be active) - SponsoredAffiliateAA, SponsoredAffiliateDBRN, SponsoredAffiliateFLNT (has at least one departmental sponsorship). However, only 5 of them (StudentAA, EnrolledStudentAA, FacultyAA, RegularStaffAA and TemoraryStaffAA) should get the radius AVP and be allowed access. However, when I query I get something like the following ldapsearch -h ldap.umich.edu -ZZ -z0 -x -D <cut> -b ou=people,dc=umich,dc=edu -LLL -s sub uniqueid=<username> umichinstroles dn: uid=<username>,ou=People,dc=umich,dc=edu umichinstroles: RegularStaffAA umichinstroles: AlumniFLNT So that is not really a group membership. Is this something I will be able to do? If I can not do it natively can folks mention other options/solutions? ------------------------ ------------------------ Walter Reynolds Principal Systems Security Development Engineer Information and Technology Services University of Michigan (734) 615-9438

1 0

FreeRADIUS v2.2.5 Fedora packages available
by Nikolai Kondrashov 09 May '14

09 May '14

Hi everyone, Fedora packages of FreeRADIUS release v2.2.5 are available [1]. Users of Fedora 19 are welcome to test and leave karma feedback [2]. Nick [1] https://admin.fedoraproject.org/updates/freeradius-2.2.5-1.fc19 [2] http://fedoraproject.org/wiki/How_to_test_updates

1 0

FreeRADIUS not receiving password from WLC
by Richard Long 08 May '14

08 May '14

Hi all, I'm a bit stuck. I've stood up a CentOS server with FreeRADIUS so I can authenticate against Active Directory using a Cisco Wireless Controller. As you can see from the output below, I've got ntlm_auth and radtest working correctly, however, the wireless controller doesn't seem to be passing passwords to FreeRADIUS. I very obviously got something wrong in my setup, but I can't figure out what. I appreciate any help. [root@san-prod-rad-01 /]# ntlm_auth –-request-nt-key –-domain=NOTTELLING --username=mschmidt password: NT_STATUS_OK: Success (0x0) ------------------------------------------------------------------------ [root@san-prod-rad-01 /]# radtest mschmidt ########## 127.0.0.1 0 C@tHelm3t Sending Access-Request of id 155 to 127.0.0.1 port 1812 User-Name = "mschmidt" User-Password = "#######" NAS-IP-Address = 10.X.X.111 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=155, length=20 ------------------------------------------------------------------------ [root@san-prod-rad-01 ~]# radiusd -X FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on Oct 3 2012 at 01:22:51 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "C@tHelm3t" nastype = "other" } client 192.168.X.X { require_message_authenticator = no secret = "C@tHelm3t" shortname = "sano-wlc-01" nastype = "cisco" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = NTLM Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Instantiating module "ntlm_auth" from file /etc/raddb/modules/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=NOTTELLING --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/radiusd.conf mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain:-NOTTELLING} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/raddb/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "radpass" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 55274 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.130.5 port 32768, id=98, length=240 User-Name = "mschmidt" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "54-26-96-3b-c7-b9" Called-Station-Id = "04-da-d2-b3-ec-80:QP_USER" NAS-Port = 1 Cisco-AVPair = "audit-session-id=c0a882050000124653690841" NAS-IP-Address = 192.168.130.5 NAS-Identifier = "sano-wlc-01" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3301" EAP-Message = 0x0201000d01616e74686f6e7962 Message-Authenticator = 0xa700edf63895515ddddc22454448b583 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "mschmidt", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 131 ++[files] returns ok [sql] expand: %{User-Name} -> mschmidt [sql] sql_set_user escaped user --> 'mschmidt' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mschmidt' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'mschmidt' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 [sql] User mschmidt not found ++[sql] returns notfound ++[expiration] returns noop ++[logintime] returns noop [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=mschmidt [ntlm_auth] expand: --password=%{User-Password} -> --password= Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec-Program: returned: 1 ++[ntlm_auth] returns reject Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> mschmidt attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.6 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 98 to 192.168.130.5 port 32768 Waking up in 4.9 seconds. Cleaning up request 0 ID 98 with timestamp +26 Ready to process requests.

4 4