February 2015 - Freeradius-Users - lists.freeradius.org

GGSN/APN Freeradius and Proxy
by Tevfik Ceydeliler 25 Feb '15

25 Feb '15

Hi, I try to authenticate users come from GGSN-APN But cant achieve this. here is radius log: ######################################33 FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Feb 24 2014 at 14:57:57 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ ... ... including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/sqlippool.conf including configuration file /etc/freeradius/sql/mysql/ippool.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server motp_1 { ipaddr = 10.1.1.52 port = 1812 type = "auth+acct" secret = "geheim" response_window = 30 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server motp_2 { ipaddr = 10.43.1.52 port = 1812 type = "auth+acct" secret = "geheim" response_window = 30 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server secovid_1 { ipaddr = 10.1.1.51 port = 1812 type = "auth+acct" secret = "test" response_window = 30 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server secovid_2 { ipaddr = 10.43.1.50 port = 1812 type = "auth+acct" secret = "test" response_window = 30 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 300 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool motp_pool { type = fail-over home_server = motp_1 home_server = motp_2 } realm motp { auth_pool = motp_pool } home_server_pool secovid_pool { type = fail-over home_server = secovid_1 } realm secovid { auth_pool = secovid_pool } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.65.8.117 { require_message_authenticator = no secret = "test" shortname = "TFCPC" } client 172.30.80.1 { require_message_authenticator = no secret = "1q2w3e4r" shortname = "TurkcellNasClient" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "radpass" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 ... ... rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_sqlippool Module: Instantiating module "sqlippool" from file /etc/freeradius/sqlippool.conf sqlippool { sql-instance-name = "sql" lease-duration = 21600 pool-name = "" allocate-begin = "START TRANSACTION" allocate-clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate-find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < NOW() OR expiry_time IS NULL) ORDER BY (username < '%{User-Name}'), (callingstationid < '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate-update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 21600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate-commit = "COMMIT" allocate-rollback = "ROLLBACK" pool-check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start-begin = "START TRANSACTION" start-update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 21600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start-commit = "COMMIT" start-rollback = "ROLLBACK" alive-begin = "START TRANSACTION" alive-update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 21600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive-commit = "COMMIT" alive-rollback = "ROLLBACK" stop-begin = "START TRANSACTION" stop-clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop-commit = "COMMIT" stop-rollback = "ROLLBACK" on-begin = "START TRANSACTION" on-clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" on-commit = "COMMIT" on-rollback = "ROLLBACK" off-begin = "START TRANSACTION" off-clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" off-commit = "COMMIT" off-rollback = "ROLLBACK" sqlippool_log_exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" sqlippool_log_failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" defaultpool = "main_pool" } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 39432 ... ... ... adding new socket proxy address * port 51016 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 172.30.80.1 port 24432, id=210, length=375 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "vantacgida4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} - vantacgida4 [sql] sql_set_user escaped user -- 'vantacgida4' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id - SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vantacgida4' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id - SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vantacgida4' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority - SELECT groupname FROM radusergroup WHERE username = 'vantacgida4' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id - SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'UGR_TcellOtonomYBD-PSB-Secovid' ORDER BY id [sql] User found in group UGR_TcellOtonomYBD-PSB-Secovid [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id - SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'UGR_TcellOtonomYBD-PSB-Secovid' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 235 to 10.1.1.51 port 1812 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 Proxy-State = 0x323130 Proxying request 0 to home server 10.1.1.51 port 1812 Sending Access-Request of id 235 to 10.1.1.51 port 1812 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 Proxy-State = 0x323130 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 172.30.80.1 port 24432, id=210, length=375 Sending duplicate proxied request to home server 10.1.1.51 port 1812 - ID: 235 Sending Access-Request of id 235 to 10.1.1.51 port 1812 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 Proxy-State = 0x323130 Waking up in 0.9 seconds. rad_recv: Access-Reject packet from host 10.1.1.51 port 1812, id=235, length=25 Proxy-State = 0x323130 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - vantacgida4 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 210 to 172.30.80.1 port 24432 Waking up in 4.9 seconds. Waking up in 23.9 seconds. rad_recv: Access-Request packet from host 172.30.80.1 port 24432, id=210, length=375 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "vantacgida4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} - vantacgida4 [sql] sql_set_user escaped user -- 'vantacgida4' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id - SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vantacgida4' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id - SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vantacgida4' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority - SELECT groupname FROM radusergroup WHERE username = 'vantacgida4' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id - SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'UGR_TcellOtonomYBD-PSB-Secovid' ORDER BY id [sql] User found in group UGR_TcellOtonomYBD-PSB-Secovid [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id - SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'UGR_TcellOtonomYBD-PSB-Secovid' ORDER BY id rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 91 to 10.1.1.51 port 1812 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 Proxy-State = 0x323130 Proxying request 1 to home server 10.1.1.51 port 1812 Sending Access-Request of id 91 to 10.1.1.51 port 1812 Calling-Station-Id = "905344776557" User-Name = "vantacgida4" NAS-IP-Address = 172.30.80.1 NAS-Identifier = "MTCGGSNK3" Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context NAS-Port-Type = Wireless-Other 3GPP-IMSI = "286015326539253" 3GPP-IMSI-MCC-MNC = "28601" 3GPP-NSAPI = "5" 3GPP-Selection-Mode = "0" 3GPP-Charging-ID = 151347210 3GPP-GPRS-Negotiated-QoS-profile = "05-13921F7396F7FE74620846006400" 3GPP-Charging-Characteristics = "0800" Called-Station-Id = "yasarapn" 3GPP-SGSN-Address = 86.108.153.243 3GPP-SGSN-MCC-MNC = "28601" 3GPP-GGSN-Address = 86.108.153.126 3GPP-GGSN-MCC-MNC = "28601" 3GPP-Negotiated-DSCP = 18 3GPP-RAT-Type = 1 3GPP-Location-Info = 0x0182f610ebaa0678 3GPP-Attr-23 = 0x8020 3GPP-IMEISV = "3539230324392801" 3GPP-PDP-Type = 0 NAS-Port = 121000 User-Password = "5080+00526417" 3GPP-Charging-Gateway-Address = 10.200.211.27 Proxy-State = 0x323130 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Reject packet from host 10.1.1.51 port 1812, id=91, length=25 Proxy-State = 0x323130 # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - vantacgida4 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 210 to 172.30.80.1 port 24432 Waking up in 4.9 seconds. ######################### and here is user configuration ############################# mysql select * from radusergroup where username like '%vantacgida4%'; +-------------+--------------------------------+----------+ | username | groupname | priority | +-------------+--------------------------------+----------+ | vantacgida4 | UGR_TcellOtonomYBD-PSB-Secovid | 0 | +-------------+--------------------------------+----------+ mysql select * from radgroupcheck where groupname like '%TcellOtonomYBD-PSB-Secovid%'; +----+--------------------------------+----------------+----+-----------------------+ | id | groupname | attribute | op | value | +----+--------------------------------+----------------+----+-----------------------+ | 7 | UGR_TcellOtonomYBD-PSB-Secovid | Proxy-To-Realm | := | secovid | | 18 | UGR_TcellOtonomYBD-PSB-Secovid | Pool-Name | := | IP_TcellOtonomYBD-PSB | +----+--------------------------------+----------------+----+-----------------------+ ############################# And proxy.conf ############################# proxy server { default_fallback = no } home_server localhost { type = auth ipaddr = 127.0.0.1 port = 1812 secret = testing123 require_message_authenticator = yes response_window = 20 zombie_period = 40 revive_interval = 120 status_check = status-server check_interval = 30 num_answers_to_alive = 3 max_outstanding = 65536 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } # mOTP home_server motp_1 { type = auth+acct ipaddr = 10.1.1.52 port = 1812 secret = geheim } home_server motp_2 { type = auth+acct ipaddr = 10.43.1.52 port = 1812 secret = geheim } home_server_pool motp_pool { type = fail-over home_server = motp_1 home_server = motp_2 } realm motp { auth_pool = motp_pool } # SecOvid home_server secovid_1 { type = auth+acct ipaddr = 10.1.1.51 port = 1812 secret = test } home_server secovid_2 { type = auth+acct ipaddr = 10.43.1.50 port = 1812 secret = test } home_server_pool secovid_pool { type = fail-over home_server = secovid_1 home_server_2 = secovid_2 } realm secovid { auth_pool = secovid_pool } ############################### cLients.conf ############################### client 10.65.8.117 { secret = test shortname = TFCPC nastype = other } client 172.30.80.1 { secret = XXXXX nastype = other shortname = TurkcellNasClient } ##################################### When I test byusing NTRadping I can get IP address from pool and access-accept packets But when I try in production ( from APN adn and GSM operator) I get accept-reject Can anydody tell me what I miss or wrong? Regards -- <br> <img src="http://www.yasar.com.tr/banner/yhbanner.jpg"> </img> <br><br> Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately notify the sender and delete it from your system.

2 7

Simultaneous-Use := 2 and MySQL
by Reilly, Paul 25 Feb '15

25 Feb '15

I configured mysql to use for accounting and can see information in radacct. If I don't set a nas type in clients.conf will Simultaneous-Use only use SQL to check if a user is logged in and not use checkrad (correct)? Also I continue to get the error where setting Simultaneous-Use to :=2 it fails (nas type not set). See information below When set to Simultaneous-Use := 1 (second user below) [sql] expand: %{User-Name} -> preilly [sql] sql_set_user escaped user --> 'preilly' [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'preilly' ORDER BY id [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'preilly' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'preilly' ORDER BY priority [sql] expand: %{User-Name} -> preilly [sql] sql_set_user escaped user --> 'preilly' [sql] expand: SELECT COUNT(*) #FROM radacct #WHERE username = '%{SQL-User-Name}' #AND acctstoptime IS NULL -> SELECT COUNT(*) #FROM radacct #WHERE username = 'preilly' #AND acctstoptime IS NULL [sql] expand: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL -> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'preilly' AND acctstoptime IS NULL Multiple logins (max 1) : [preilly] (from client Cisco port 0 via TLS tunnel) User-Name = "preilly" [suffix] No '@' in User-Name = "preilly", looking up realm NULL Login incorrect: [preilly/<via Auth-Type = EAP>] (from client Cisco port 13 cli 58-b0-35-67-b6-ed) [attr_filter.access_reject] expand: %{User-Name} -> preilly Simultaneous-Use := 2 USER 1: Login OK: [preilly] (from client Cisco port 0 via TLS tunnel) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" User-Name = "preilly" [suffix] No '@' in User-Name = "preilly", looking up realm NULL Login OK: [preilly] (from client Cisco port 13 cli 60-33-4b-0a-35-7b) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" [acct_unique] Hashing 'NAS-Port = 13,Client-IP-Address = 172.23.160.4,NAS-IP-Address = 172.23.160.4,Acct-Session-Id = "54edc53c/60:33:4b:0a:35:7b/815513",User-Name = "preilly"' [suffix] No '@' in User-Name = "preilly", looking up realm NULL [sql] expand: %{User-Name} -> preilly [sql] sql_set_user escaped user --> 'preilly' USER 2: Login OK: [preilly] (from client Cisco port 0 via TLS tunnel) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" User-Name = "preilly" [suffix] No '@' in User-Name = "preilly", looking up realm NULL Login OK: [preilly] (from client Cisco port 13 cli 58-b0-35-67-b6-ed) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" [acct_unique] Hashing 'NAS-Port = 13,Client-IP-Address = 172.23.160.4,NAS-IP-Address = 172.23.160.4,Acct-Session-Id = "54edccc5/58:b0:35:67:b6:ed/816142",User-Name = "preilly"' [suffix] No '@' in User-Name = "preilly", looking up realm NULL [sql] expand: %{User-Name} -> preilly [sql] sql_set_user escaped user --> 'preilly' [attr_filter.accounting_response] expand: %{User-Name} -> preilly USER 3: Login OK: [preilly] (from client Cisco port 0 via TLS tunnel) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" User-Name = "preilly" [suffix] No '@' in User-Name = "preilly", looking up realm NULL Login OK: [preilly] (from client Cisco port 13 cli 24-a2-e1-d4-66-07) expand: %{User-Name} -> preilly expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=preilly) [ldap] performing search in OU=EPSD,DC=win,DC=eastpennsd,DC=org, with filter (sAMAccountName=preilly) User-Name = "preilly" User-Name = "preilly" [acct_unique] Hashing 'NAS-Port = 13,Client-IP-Address = 172.23.160.4,NAS-IP-Address = 172.23.160.4,Acct-Session-Id = "54edd0ed/24:a2:e1:d4:66:07/816564",User-Name = "preilly"' [suffix] No '@' in User-Name = "preilly", looking up realm NULL [sql] expand: %{User-Name} -> preilly [sql] sql_set_user escaped user --> 'preilly' [attr_filter.accounting_response] expand: %{User-Name} -> preilly Below is the table in SQL with all 3 logged in: mysql> select * from radacct; +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ | radacctid | acctsessionid | acctuniqueid | username | groupname | realm | nasipaddress | nasportid | nasporttype | acctstarttime | acctstoptime | acctsessiontime | acctauthentic | connectinfo_start | connectinfo_stop | acctinputoctets | acctoutputoctets | calledstationid | callingstationid | acctterminatecause | servicetype | framedprotocol | framedipaddress | acctstartdelay | acctstopdelay | xascendsessionsvrkey | +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ | 101 | 54edc53c/60:33:4b:0a:35:7b/815513 | 218dd0fa625ec043 | preilly | | | 172.23.160.4 | 13 | Wireless-802.11 | 2015-02-25 07:51:08 | NULL | 2844 | RADIUS | | NULL | 1198146 | 2596646 | 172.23.160.4 | 172.26.160.75 | | | | 172.26.160.75 | 0 | NULL | | | 102 | 54edccc5/58:b0:35:67:b6:ed/816142 | def07acd9c4933a3 | preilly | | | 172.23.160.4 | 13 | Wireless-802.11 | 2015-02-25 08:23:18 | NULL | 978 | RADIUS | | NULL | 130719 | 19886 | 172.23.160.4 | 172.26.161.254 | | | | 172.26.161.254 | 0 | NULL | | | 103 | 54edd0ed/24:a2:e1:d4:66:07/816564 | 72262aa1fafe27d4 | preilly | | | 172.23.160.4 | 13 | Wireless-802.11 | 2015-02-25 08:41:01 | NULL | 0 | RADIUS | | | 0 | 0 | 172.23.160.4 | 172.26.162.1 | | | | 172.26.162.1 | 0 | 0 | | +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ 3 rows in set (0.00 sec) From Paul Reilly

2 1

switch with multiple values per case
by Jakob Hirsch 25 Feb '15

25 Feb '15

Hi, is it possible to do something like this? switch Huntgroup-Name { case 'hg1' 'hg2' { something } case 'hg3' 'hg4' 'hg5' { anything } } It is not mentioned in the unlang manpage, so I guess not... Regards Jakob

2 1

DHCP option 252
by Дмитрий Симоненко 25 Feb '15

25 Feb '15

Hi! How do I reply to a message DHCP-Inform (WPAD) so that more did not come DHCP-Inform packages, if I do not use WPAD? What I should include in the option 252? Thank you! __________________________ С уважением, Симоненко Д.В.

3 5

FreeRadius not linking with correct openssl library.
by A Lee 25 Feb '15

25 Feb '15

Hi, Currently I am trying to build freeradius2.2.6. Now the issue is I am running configure script with the options --with-openssl-includes=path/to/local/ssl/includes --with-openssl-libraries=/path/to/local/ssl/libraries. Now while linking the radius server binary is linking against the systems default shared object library. I am using RHEL6 64 bit but this comes with an openssl library that has heartbleed bug. I have another copy of openssl src 0.9.8 and I am building that src to generate the so and static libs. Now providing the paths to those libraries while running configure script. but freeradius is not linking against the provided libs. >From the build output it is clear that path to the libraries are correctly passed using -L flag to linker. Though the linking happens against system libs. Is this a known issue or is there any fix to it ? Thanks and Regards.

2 1

Fwd: Your message to Freeradius-Users awaits moderator approval
by Reilly, Paul 24 Feb '15

24 Feb '15

Sent from my iPhone Begin forwarded message: From: "Reilly, Paul" <preilly(a)eastpennsd.org<mailto:preilly@eastpennsd.org>> Date: February 24, 2015 at 3:04:42 PM EST To: "'freeradius-users-owner(a)lists.freeradius.org<mailto:freeradius-users-owner@lists.freeradius.org>'" <freeradius-users-owner(a)lists.freeradius.org<mailto:freeradius-users-owner@lists.freeradius.org>> Subject: RE: Your message to Freeradius-Users awaits moderator approval After setting up mysql and logging in a few devices with my login I am getting similar failures. Below is the mysql tables information for the clients. I could post the debug but it was to long. I see errors for checkrad but don’t belive they pertain to simultaneous-use but it looks like they ahev different ids. +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ | radacctid | acctsessionid | acctuniqueid | username | groupname | realm | nasipaddress | nasportid | nasporttype | acctstarttime | acctstoptime | acctsessiontime | acctauthentic | connectinfo_start | connectinfo_stop | acctinputoctets | acctoutputoctets | calledstationid | callingstationid | acctterminatecause | servicetype | framedprotocol | framedipaddress | acctstartdelay | acctstopdelay | xascendsessionsvrkey | +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ | 50 | 54ec7ba8/60:33:4b:0a:35:7b/803999 | f8a890aec50f7a73 | preilly | | | 172.23.160.4 | 13 | Wireless-802.11 | 2015-02-24 08:24:57 | NULL | 2077 | RADIUS | | NULL | 609552 | 1082964 | 172.23.160.4 | 172.26.160.75 | | | | 172.26.160.75 | 0 | NULL | | | 51 | 54ec7d5f/24:a2:e1:d4:66:07/804159 | 60ffea74a45c72a6 | preilly | | | 172.23.160.4 | 13 | Wireless-802.11 | 2015-02-24 08:32:15 | NULL | 1649 | RADIUS | | NULL | 51626 | 122526 | 172.23.160.4 | 172.26.162.1 | | | | 172.26.162.1 | 0 | NULL | | +-----------+-----------------------------------+------------------+----------+-----------+-------+--------------+-----------+-----------------+---------------------+--------------+-----------------+---------------+-------------------+------------------+-----------------+------------------+-----------------+------------------+--------------------+-------------+----------------+-----------------+----------------+---------------+----------------------+ 2 rows in set (0.00 sec) Radcheck mysql> select * from radcheck -> ; +----+----------+------------------+----+-------+ | id | username | attribute | op | value | +----+----------+------------------+----+-------+ | 3 | preilly | Simultaneous-Use | := | 1 | +----+----------+------------------+----+-------+ 1 row in set (0.00 sec) -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+preilly=eastpennsd.org@lists.freeradius.org] On Behalf Of freeradius-users-owner(a)lists.freeradius.org<mailto:freeradius-users-owner@lists.freeradius.org> Sent: Tuesday, February 24, 2015 9:12 AM To: Reilly, Paul Subject: Your message to Freeradius-Users awaits moderator approval Your mail to 'Freeradius-Users' with the subject RE: FreeRadius LDAP Simultaneous-Use more than 1 Is being held until the list moderator can review it for approval. The reason it is being held: Message body is too big: 154150 bytes with a limit of 100 KB Either the message will get posted to the list, or you will receive notification of the moderator's decision. If you would like to cancel this posting, please visit the following URL: http://lists.freeradius.org/mailman/confirm/freeradius-users/8fc8cfc46a379b…

1 0

Sudden User Authentication Rejection as a result Compatibility - error
by Clement Ogedengbe 24 Feb '15

24 Feb '15

Hello, Our 802.1x Radius service has run uninterrupted for almost 2 years. Sometime in the morning yesterday, the server started rejecting authentications and Radius log shows loads of Certificate Compatibility problems as below. The certificate has not expired and the configuration on the server has not been amended for almost 2 years. I wonder why the server should suddenly start to reject user authentication on the basis of certificate compatibility. WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x2e8b52f829824b0d did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 193.62.48.38 port 1814, id=197, length=248 Best Regards Clement Ogedengbe

8 17

DHCP broadcasts are not leaving the interface
by Diman 24 Feb '15

24 Feb '15

Hi All, I am trying to setup up freeradius as dchp server. Everything is Ok, exempt broadcast packets (dhcp offers) are not leaving the server interface. I use Ubuntu 14.04.2 LTS (GNU/Linux 3.13.0-45-generic i686) and FreeRADIUS Version 2.2.7,compiled from git v2.x.x sources. Firewall is off, radiusd runs as root. strace shows some sendto() errors like: EACCES (Permission denied) and EINVAL (Invalid argument). The EINVAL (Invalid argument) could be fixed with "--without-udpfromto" compile option. The full details are available at http://pastebin.com/625BEbr1 I have not a programmer at all, but my suspicion is that send socket option SO_BROADCAST is not set ... not sure. Unicast replies are Ok. My questions are: what else should I check? is there any workaround for this issue? Thanks. Dmitri

1 0

Why an access-request is sent before password entered?
by David Li 24 Feb '15

24 Feb '15

Hi, I am trying to narrow down a problem. Not sure if this is the right forum but it's a good starting point. The problem is that I see access-request sent to the FreeRadius server before the password is even entered in a SSH session. For example, ssh user(a)xxx.xxx.xxx.xxx ### Problem: Press Enter here and access-request is sent. Although once the password is entered, second request is sent and Radius server has no problem authenticating it. I don't have a idea right now where to start to look at this time. Is it in sshd or pam-radius? Is it a configuration issue? My set up is very standard on a Redhat 5.4 box with sshd and pam and pam-radius-auth module. Thanks. David

2 1

Version 3.0.7 has been released
by Alan DeKok 24 Feb '15

24 Feb '15

ChangeLog is available here: http://freeradius.org/version3.html Lots of minor little fixes, and some nice new features: - radmin now uses stdout / stderr for error messages - cow home_servers can be derived from client sections. - many new dynamic expansions - better SQL error messages. etc. Alan DeKok.

4 5