After upgrading from 3.0.6 to 3.0.7, I now see the following errors when
loading my config that were not present before.
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
/usr/local/etc/raddb/radiusd.conf[210]: The authenticate section should be
inside of a 'server { ... }' block!
# Loading authenticate {...}
/usr/local/etc/raddb/radiusd.conf[204]: The authorize section should be
inside of a 'server { ... }' block!
# Loading authorize {...}
/usr/local/etc/raddb/radiusd.conf[217]: The preacct section should be
inside of a 'server { ... }' block!
# Loading preacct {...}
/usr/local/etc/raddb/radiusd.conf[222]: The accounting section should be
inside of a 'server { ... }' block!
# Loading accounting {...}
/usr/local/etc/raddb/radiusd.conf[226]: The post-proxy section should be
inside of a 'server { ... }' block!
} # server
radiusd: #### Opening IP addresses and Ports ####
This has me rather perplexed, as clearly the sections are within a server {
} block. The server still behaves and responds to requests correctly. Is
there something obvious that I am overlooking?
Below is full debug output and my conf:
fbsd101-vm# radiusd -X
Copyright (C) 1999-2015 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
main {
security {
user = "freeradius"
group = "freeradius"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/var"
sbindir = "/usr/local/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 10
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = no
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
client 192.168.92.0/24 {
ipaddr = 192.168.92.0/24
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = PERL
radiusd: #### Instantiating modules ####
# Loaded module rlm_perl
# Instantiating module "perl" from file /usr/local/etc/raddb/radiusd.conf
perl {
filename = "/space/rxg/rxgd/bin/freeradius_hook"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_post_auth = "post_auth"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_recv_coa = "recv_coa"
func_send_coa = "send_coa"
}
# Loaded module rlm_detail
# Instantiating module "detail" from file
/usr/local/etc/raddb/radiusd.conf
detail {
filename = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
permissions = 420
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_expr
# Instantiating module "expr" from file /usr/local/etc/raddb/radiusd.conf
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_eap
# Instantiating module "eap" from file /usr/local/etc/raddb/radiusd.conf
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 2048
}
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "perl"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/ssl/server.key"
certificate_file = "/etc/ssl/server.crt"
ca_file = "/etc/ssl/server.crt"
dh_file = "/usr/local/etc/raddb/dhparam"
random_file = "/space/rxg/rxgd/bin/random"
fragment_size = 1024
include_length = yes
check_crl = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = no
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "gtc"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "gtc"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file
/usr/local/etc/raddb/radiusd.conf
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = yes
}
# Instantiating module "sradutmp" from file
/usr/local/etc/raddb/radiusd.conf
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter" from file
/usr/local/etc/raddb/radiusd.conf
attr_filter {
filename = "/usr/local/etc/raddb/attrs"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/attrs
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/usr/local/etc/raddb/radiusd.conf
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /usr/local/etc/raddb/huntgroups
reading pairlist file /usr/local/etc/raddb/hints
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
/usr/local/etc/raddb/radiusd.conf[210]: The authenticate section should be
inside of a 'server { ... }' block!
# Loading authenticate {...}
/usr/local/etc/raddb/radiusd.conf[204]: The authorize section should be
inside of a 'server { ... }' block!
# Loading authorize {...}
/usr/local/etc/raddb/radiusd.conf[217]: The preacct section should be
inside of a 'server { ... }' block!
# Loading preacct {...}
/usr/local/etc/raddb/radiusd.conf[222]: The accounting section should be
inside of a 'server { ... }' block!
# Loading accounting {...}
/usr/local/etc/raddb/radiusd.conf[226]: The post-proxy section should be
inside of a 'server { ... }' block!
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 1812
}
listen {
type = "acct"
ipaddr = *
port = 1813
}
Listening on auth address * port 1812
Listening on acct address * port 1813
Ready to process requests
cat /usr/local/etc/raddb/radiusd.conf
client 192.168.92.0/24 {
ipaddr = 192.168.92.0/24
secret = d0ee524f6cb9966ce134d251a3e820c7
}
prefix = /usr/local
exec_prefix = ${prefix}
sysconfdir = ${prefix}/etc
localstatedir = /var
sbindir = ${exec_prefix}/sbin
logdir = /var/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
name = radiusd
confdir = ${raddbdir}
modconfdir = ${confdir}/mods-config
certdir = ${confdir}/certs
cadir = ${confdir}/certs
run_dir = ${localstatedir}/run/${name}
db_dir = ${raddbdir}
pidfile = /var/run/radiusd/radiusd.pid
checkrad = ${sbindir}/checkrad
listen {
ipaddr = *
port = 1812
type = auth
}
listen {
ipaddr = *
port = 1813
type = acct
}
log {
#destination = files
#colourise = yes
#file = ${logdir}/radius.log
#syslog_facility = daemon
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
}
security {
user = freeradius
group = freeradius
allow_core_dumps = no
max_attributes = 200
reject_delay = 1
status_server = yes
}
thread pool {
start_servers = 1
max_servers = 4
min_spare_servers = 1
max_spare_servers = 2
max_requests_per_server = 0
}
max_request_time = 30
cleanup_delay = 5
max_requests = 10
hostname_lookups = no
delete_blocked_requests = no
regular_expressions = yes
extended_expressions = yes
usercollide = no
lower_user = no
lower_pass = no
nospace_user = no
nospace_pass = no
snmp = no
proxy_requests = no
modules {
perl {
filename = /space/rxg/rxgd/bin/freeradius_hook
}
detail {
filename = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
permissions = 0644
}
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
eap {
default_eap_type = peap
timer_expire = 60
ignore_unknown_eap_types = no
gtc {
challenge = "Password: "
auth_type = perl
}
tls-config tls-common {
private_key_password =
private_key_file = /etc/ssl/server.key
certificate_file = /etc/ssl/server.crt
ca_file = /etc/ssl/server.crt
dh_file = /usr/local/etc/raddb/dhparam
random_file = /space/rxg/rxgd/bin/random
}
tls {
tls = tls-common
}
ttls {
tls = tls-common
default_eap_type = gtc
copy_request_to_tunnel = yes
use_tunneled_reply = yes
}
peap {
tls = tls-common
default_eap_type = gtc
default_method = gtc
copy_request_to_tunnel = yes
use_tunneled_reply = yes
}
}
radutmp {
filename = ${logdir}/radutmp
username = %{User-Name}
case_sensitive = yes
check_with_nas = yes
caller_id = "yes"
}
radutmp sradutmp {
filename = ${logdir}/sradutmp
permissions = 0644
caller_id = "no"
}
attr_filter {
filename = ${confdir}/attrs
}
preprocess {
huntgroups = ${confdir}/huntgroups
hints = ${confdir}/hints
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
}
}
policy {
class_value_prefix = 'ai:'
acct_unique {
if ("%{string:Class}" =~
/${policy.class_value_prefix}([0-9a-f]{32})/i) {
update request {
&Acct-Unique-Session-Id := "%{md5:%{1},%{Acct-Session-ID}}"
}
}
else {
update request {
&Acct-Unique-Session-Id :=
"%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}"
}
}
}
insert_acct_class {
update reply {
&Class =
"${policy.class_value_prefix}%{md5:%t,%I,%{Packet-Src-Port},%{Packet-Src-IP-Address},%{NAS-IP-Address},%{Calling-Station-ID},%{User-Name}}"
}
}
acct_counters64.preacct {
update request {
&Acct-Input-Octets64 = "%{expr:(&Acct-Input-Gigawords << 32) |
&Acct-Input-Octets}"
&Acct-Output-Octets64 = "%{expr:(&Acct-Output-Gigawords << 32)
| &Acct-Output-Octets}"
}
}
}
server {
authorize {
preprocess
eap
perl
}
authenticate {
Auth-Type PERL {
perl
}
eap
}
preacct {
preprocess
acct_unique
}
accounting {
perl
}
post-proxy {
eap
perl
}
}
