March 2015 - Freeradius-Users - lists.freeradius.org

Authenticate to AD but only allow certain group
by Brian C. Huffman 16 Aug '25

16 Aug '25

All, I've got authentication working nicely with MSCHAP, but now I'd like to only allow users that are members of a certain AD group. I would prefer to have this happen only when requests come from a specific client (wireless access point). In this case the idea is to have users only be able to get wireless access when they're in a specific AD group. How can I do this in freeradius? Thanks, Brian

7 18

Detailed Logging freeradius Request Packets
by Jean-Francois Mousinho 28 Oct '19

28 Oct '19

Hi, I've tried to find a way of detail logging the packets sent by freeradius to the client in the authentication phase but didn't found a way of doing it. Maybe I've not looked correctly so I'm asking if it's actually possible? I was able to log detailed packets sent by the client (Response packets) but not the ones sent by freeradius to the client (except accounting and proxied ones). Thanks for your time. Jean-François Mousinho

4 6

3.0.4: binary LDAP attributes
by Nikolai Kondrashov 24 Mar '17

24 Mar '17

Hi everyone, Our (Red Hat) QA was testing the effect of this entry in 3.0.4 ChangeLog: * Modify pairparsevalue to deal with embedded NULLs better, and use the binary versions of attribute values in rlm_ldap. They have noticed that binary LDAP values get truncated on embedded zero characters (\0) in RADIUS replies, in radiusReplyMessage in particular. I.e. for radiusReplyMessage:: cmVwbHkgd2l0aCBhAGI= The response output by radtest was Reply-Message = 'reply with a' The network capture also showed that RADIUS reply packets contained truncated values. Is this intended, or was there a fix for this? In related discoveries, it seems that backslashes get removed from LDAP attribute values in RADIUS replies, so radiusReplyMessage: reply with a\0b becomes Reply-Message = 'reply with a0b' in radtest output. Is this intended? Thank you. Nick

4 12

user-group for rejected users
by Fabricio Viana 21 Mar '17

21 Mar '17

Hello! Let´s suppose the following situations: 1) User exists but the password is wrong 2) User does not exist In both cases the answer is REJECT. It happens that certain hardware is making endless attempts that eventually saturating the server. - It is possible to cause the server, instead of rejecting the users, accept the login but responds ACCEPT with "framed-pool = pool-block" ? or/and - Is there any way to put REJECT users in a given group by default? Thanks! Fabricio

3 3

freeradius2 + iODBC + Informix
by vanish 28 Nov '16

28 Nov '16

Hello, Please help me set up freeradius2 + iODBC + Informix (I'm newbie in freeradius). - I have a test-machine with Ubuntu 14.04 and Freeradius-server v2.1.12. - I have a server with Informix Database Server v 10.00 Step 1: - I installed unixODBC on test-machine - I installed informix-csdk for connect to Informix Database Server (Driver) - I configured files /etc/odbc.ini and /etc/odbcinst.ini to connect to Informix Database Server - Checking with isql: +++++++++++++++++++++++++++++++++++++++++ root@test:/home/test# isql -v work +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> select 1 from TABLES(SET{1}) 1 +++++++++++++++++++++++++++++++++++++++++ - Everything is allright. Step 2: - I try to install freeradius-iodbc module to connect to Informix Database Server - During install I get next warning: +++++++++++++++++++++++++++++++++++++++++++++ The following packages will be REMOVED: unixodbc unixodbc-dev The following NEW packages will be installed: libiodbc2-dev +++++++++++++++++++++++++++++++++++++++++++++ - so unixodbc and unixodbc-dev packages was removed after install freeradius-iodbc - I included in radiusd.conf: +++++++++++++++++++++++++++++++++++++++++++++ sql { # # Set the database to one of: # # mysql, mssql, oracle, postgresql # database = "iodbc" # # Which FreeRADIUS driver to use. # driver = "rlm_sql_${database}" # Connection info: server = "test.server.ru" port = 1425 login = "test" password = "test123" radius_db = "test" ... +++++++++++++++++++++++++++++++++++++++++++++ - freeradius -XXX showed me next error: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ... Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Driver rlm_sql_iodbc (module rlm_sql_iodbc) loaded and linked Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to connect to test@test.server.ru:1425/test Fri Nov 21 14:53:48 2014 : Debug: rlm_sql (sql): starting 0 Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to connect rlm_sql_iodbc #0 Fri Nov 21 14:53:48 2014 : Error: sql_create_socket: SQLConnectfailed: [iODBC][Driver Manager]Data source name not found and no default driver specified. Driver could not be loaded Fri Nov 21 14:53:48 2014 : Error: rlm_sql (sql): Failed to connect DB handle #0 ... +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - Error - "SQLConnectfailed: [iODBC][Driver Manager]Data source name not found and no default driver specified. Driver could not be loaded." - Where did I go wrong? - I found some information in net with same problem, but clear decision nowhere not found.

4 4

No Logon Servers error with FreeRADIUS + NTLM
by Stefan Paetow 19 Feb '16

19 Feb '16

Hi, I know this is not a problem with FreeRADIUS, however, there are several people on this list who run FreeRADIUS with Active Directory as a back end and I need their advice on this. I've run into the dreaded "No logon servers (0xc000005e)" error with NTLM. In the past I've found that the computer password for the server expired on AD and that it was either fixed by rejoining, or by tweaking the password's expiry. Do any AD folk on the list know what we can do to get this stable and that this does not occur again? Any ideas will be very useful. :-) With Regards Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 Janet, the UK's research and education network. Janet(UK) is a trading name of Jisc Collections and Janet Limited, a not-for-profit company which is registered in England under No. 2881024 and whose Registered Office is at Lumen House, Library Avenue, Harwell Oxford, Didcot, Oxfordshire. OX11 0SG. VAT No. 614944238

2 1

session log in SQL
by Khapare Joshi 31 Jul '15

31 Jul '15

Now its time to configure to log into SQL :) Until now we uses cisco wireless controller and only allow two connection for all users. I wanted to implement Simultaneous-user based in student and staff. and want to use sql for it. My users are authenticate against AD (samb +ntml_auth). So here is what I did : 1. Created database radius. 2. Populated admin.sql into the mysql 3. Populated schema.sql into the radius database 4. Enabled sql.conf in /etc/raddb/radius.conf 5. Disabled radutmp and enabled sql in accounting section in /etc/raddb/site-enabled/default 6. So, added DEFAULT Simultaneous-Use := 2 in /etc/raddb/users file for testing 7. restarted radius - try logging few users But I do not see any tables in radius database been updated. I just wanted to use session for the simultaneous user for restrict user. if this works then I can write regex to query LDAP if x is staff or student. Point me if i am doing wrong or some docs where I can see more reading reading reading. K

2 10

Acess reject dropped by freeradius
by sai ram 03 Jul '15

03 Jul '15

Hi, I am using freeradius 2.2.1 Whenever I use wrong credentials, NAS sends access reject. Access reject packet is received when I do a packet capture. But freeradius doesn't acknowledge access reject the same way it does for access accept. I changed reject_delay parameter to 0. But I still don't receive the access reject from freeradius. So every time wrong credentials is entered, I get time out instead of access reject. Is there some other configuration is need to change ? Regards, Sairam

2 3

error in the queries.conf file
by Pawel Bien 02 Jun '15

02 Jun '15

I found an error in the file raddb/mods-config/sql/main/mysql/queries.conf (fr 3.0.7) There is missing value for connectinfo_stop field in the SQL INSERT statement (after '%{Connect-Info}' in the line 380). This cause an error: rlm_sql_mysql: MySQL error 'Column count doesn't match value count at row 1' accounting { (...) type { (...) stop { (...) # # The update condition matched no existing sessions. Use # the values provided in the update to create a new session. # query = "\ INSERT INTO ${....acct_table2} \ (${...column_list}) \ VALUES \ ('%{Acct-Session-Id}', \ '%{Acct-Unique-Session-Id}', \ '%{SQL-User-Name}', \ '%{Realm}', \ '%{NAS-IP-Address}', \ '%{NAS-Port}', \ '%{NAS-Port-Type}', \ FROM_UNIXTIME(%{integer:Event-Timestamp} - \ %{%{Acct-Session-Time}:-0}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ '%{Acct-Session-Time}', \ '%{Acct-Authentic}', '', \ '%{Connect-Info}', \ <-missing value after this '%{%{Acct-Input-Gigawords}:-0}' << 32 | \ '%{%{Acct-Input-Octets}:-0}', \ '%{%{Acct-Output-Gigawords}:-0}' << 32 | \ '%{%{Acct-Output-Octets}:-0}', \ '%{Called-Station-Id}', \ '%{Calling-Station-Id}', \ '%{Acct-Terminate-Cause}', \ '%{Service-Type}', \ '%{Framed-Protocol}', \ '%{Framed-IP-Address}')" } } } Just add next line with '', \ after '%{Connect-Info}', \ The similar error is duplicated in queries.conf template for the other database types (mssql, oracle, sqlite) except postgresql. Cheers, Pawel Bien

3 3

Different behaviour of 2.2.0 and 2.2.6 in handling Post-auth-type reject
by Wiesław Bieniek 31 May '15

31 May '15

Hello, I've used default server configured as follows: post-auth { # my module decides to allow or reject request rtdps2 Post-Auth-Type REJECT { attr_filter.access_reject } } When I run this on 2.2.0 I got debug: Thu Nov 27 14:28:44 2014 : Info: ++[rtdps2] returns reject Thu Nov 27 14:28:44 2014 : Info: Using Post-Auth-Type REJECT Thu Nov 27 14:28:44 2014 : Info: # Executing group from file ../etc/raddb/sites-enabled/default Thu Nov 27 14:28:44 2014 : Info: +- entering group REJECT {...} Thu Nov 27 14:28:44 2014 : Info: [attr_filter.access_reject] expand: %{User-Name} -> testing Thu Nov 27 14:28:44 2014 : Debug: attr_filter: Matched entry DEFAULT at line 11 Thu Nov 27 14:28:44 2014 : Info: ++[attr_filter.access_reject] returns updated Sending Access-Reject of id 80 to 192.168.1.4 port 33304 Cisco-AVPair := "h323-return-code=8" Which is correct, but when I run it in 2.2.6 I got: Thu Nov 27 14:19:35 2014 : Info: ++[rtdps2] = reject Thu Nov 27 14:19:35 2014 : Info: +} # group post-auth = reject Sending Access-Reject of id 186 to 192.168.1.4 port 49975 Service-Type = 0 Framed-Protocol = 0 Cisco-AVPair := "h323-return-code=8" Thu Nov 27 14:19:35 2014 : Info: Finished request 0. Which is wrong, because attributes was not filtered out. Am I missing something ? Is this a bug ? What to do to make version 2.2.6 to work the same way 2.2.0 does ? Regards- *Wiesław Bieniek* <http://www.comarch.pl>

3 14