Freeradius-Users
Threads by month
- ----- 2026 -----
- July
- June
- May
- April
- March
- February
- January
- ----- 2025 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2015 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2014 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2013 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2012 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2011 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2010 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2009 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2008 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2007 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2006 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2005 -----
- December
- November
- October
- September
- August
- July
- June
- May
January 2016
- 75 participants
- 107 discussions
Hi everyone,
Our (Red Hat) QA was testing the effect of this entry in 3.0.4 ChangeLog:
* Modify pairparsevalue to deal with embedded NULLs better,
and use the binary versions of attribute values in rlm_ldap.
They have noticed that binary LDAP values get truncated on embedded zero
characters (\0) in RADIUS replies, in radiusReplyMessage in particular.
I.e. for
radiusReplyMessage:: cmVwbHkgd2l0aCBhAGI=
The response output by radtest was
Reply-Message = 'reply with a'
The network capture also showed that RADIUS reply packets contained truncated
values. Is this intended, or was there a fix for this?
In related discoveries, it seems that backslashes get removed from LDAP
attribute values in RADIUS replies, so
radiusReplyMessage: reply with a\0b
becomes
Reply-Message = 'reply with a0b'
in radtest output.
Is this intended?
Thank you.
Nick
4
12
Hello!
Let´s suppose the following situations:
1) User exists but the password is wrong
2) User does not exist
In both cases the answer is REJECT.
It happens that certain hardware is making endless attempts that eventually saturating the server.
- It is possible to cause the server, instead of rejecting the users, accept the login but responds ACCEPT with "framed-pool = pool-block" ?
or/and
- Is there any way to put REJECT users in a given group by default?
Thanks!
Fabricio
3
3
Hello,
Please help me set up freeradius2 + iODBC + Informix
(I'm newbie in freeradius).
- I have a test-machine with Ubuntu 14.04 and Freeradius-server
v2.1.12.
- I have a server with Informix Database Server v 10.00
Step 1:
- I installed unixODBC on test-machine
- I installed informix-csdk for connect to Informix Database
Server (Driver)
- I configured files /etc/odbc.ini and /etc/odbcinst.ini to
connect to Informix Database Server
- Checking with isql:
+++++++++++++++++++++++++++++++++++++++++
root@test:/home/test# isql -v work
+---------------------------------------+
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
+---------------------------------------+
SQL> select 1 from TABLES(SET{1})
1
+++++++++++++++++++++++++++++++++++++++++
- Everything is allright.
Step 2:
- I try to install freeradius-iodbc module to connect to
Informix Database Server
- During install I get next warning:
+++++++++++++++++++++++++++++++++++++++++++++
The following packages will be REMOVED:
unixodbc unixodbc-dev
The following NEW packages will be installed:
libiodbc2-dev
+++++++++++++++++++++++++++++++++++++++++++++
- so unixodbc and unixodbc-dev packages was removed after
install freeradius-iodbc
- I included in radiusd.conf:
+++++++++++++++++++++++++++++++++++++++++++++
sql {
#
# Set the database to one of:
#
# mysql, mssql, oracle, postgresql
#
database = "iodbc"
#
# Which FreeRADIUS driver to use.
#
driver = "rlm_sql_${database}"
# Connection info:
server = "test.server.ru"
port = 1425
login = "test"
password = "test123"
radius_db = "test"
...
+++++++++++++++++++++++++++++++++++++++++++++
- freeradius -XXX showed me next error:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
...
Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Driver
rlm_sql_iodbc (module rlm_sql_iodbc) loaded and linked
Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to
connect to test@test.server.ru:1425/test
Fri Nov 21 14:53:48 2014 : Debug: rlm_sql (sql): starting 0
Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to
connect rlm_sql_iodbc #0
Fri Nov 21 14:53:48 2014 : Error: sql_create_socket:
SQLConnectfailed: [iODBC][Driver Manager]Data source name
not found and no default driver specified. Driver could not be
loaded
Fri Nov 21 14:53:48 2014 : Error: rlm_sql (sql): Failed to
connect DB handle #0
...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- Error - "SQLConnectfailed: [iODBC][Driver Manager]Data
source name not found and no default driver specified. Driver
could not be loaded."
- Where did I go wrong?
- I found some information in net with same problem, but clear
decision nowhere not found.
4
4
Hello, I'm currently running FreeRADIUS 3.0.4 on a CentOS server and I
wanted to use RadPerf for testing. Since I cannot install RadPerf in
CentOS, I installed RadPerf in a separate Ubuntu 14.04 server, my
question is: which is better for RadPerf installation? on the same
server where FreeRADIUS was installed or different server?
4
4
Good afternoon,
As I told on a previous email, we are migrating previous radius (2.1.9)
authentication to a new instance of freeradius (3.0.10).
I am experiencing some problems authenticating some devices.
I have previously tested with eapol_test that the new freeradius is working
ok with both:
- EAP TTLS - PAP
- PEAP - MSCHAPv2
But when testing PEAP on some devices, it is not working properly.
It looks I am getting authorized properly, and even authenticated:
(11) [mschap] = ok
(11) } # Auth-Type MS-CHAP = ok
(11) MSCHAP Success
But I am not getting a final Access-Accept (nor an Access-Reject), and it
the authentication fails....
Any idea where could be the problem?
Thanks a lot!
Copyright (C) 1999-2015 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file
/usr/local/etc2/freeradius/share/freeradius/dictionary
including dictionary file
/usr/local/etc2/freeradius/share/freeradius/dictionary.dhcp
including dictionary file
/usr/local/etc2/freeradius/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc2/freeradius/etc/raddb/dictionary
including configuration file
/usr/local/etc2/freeradius/etc/raddb/radiusd.conf
including configuration file /usr/local/etc2/freeradius/etc/raddb/proxy.conf
including configuration file
/usr/local/etc2/freeradius/etc/raddb/clients.conf
including files in directory
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/chap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/digest
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/dhcp
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/dynamic_clients
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/echo
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/exec
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/expr
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/files
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ntlm_auth
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/radutmp
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/replicate
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/soh
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/sradutmp
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/unix
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/unpack
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/utf8
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool
including files in directory /usr/local/etc2/freeradius/etc/raddb/policy.d/
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/abfab-tr
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/accounting
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/canonicalization
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/control
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/cui
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/debug
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/dhcp
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/eap
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/filter
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/operator-name
including configuration file
/usr/local/etc2/freeradius/etc/raddb/policy.d/unav.policies
including files in directory
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/
including configuration file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
including configuration file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
including configuration file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/status
main {
security {
user = "radius"
group = "radius"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local/etc2/freeradius"
localstatedir = "/usr/local/etc2/freeradius/var"
logdir = "/usr/local/etc2/freeradius/var/log/radius"
run_dir = "/usr/local/etc2/freeradius/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local/etc2/freeradius"
localstatedir = "/usr/local/etc2/freeradius/var"
sbindir = "/usr/local/etc2/freeradius/sbin"
logdir = "/usr/local/etc2/freeradius/var/log/radius"
run_dir = "/usr/local/etc2/freeradius/var/run/radiusd"
libdir = "/usr/local/etc2/freeradius/lib"
radacctdir = "/usr/local/etc2/freeradius/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/etc2/freeradius/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/etc2/freeradius/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "CVE-2014-0160"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server radiusproxy1 {
ipaddr = 159.23xxxx
port = 1812
type = "auth+acct"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 60
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server radiusproxy2 {
ipaddr = 159.237xxx
port = 1812
type = "auth+acct"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 60
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
realm ~^(.*\.)?unav\.es$ {
}
realm UNAV-PDC-01 {
}
realm LOCAL {
}
realm NULL {
}
home_server_pool radiusproxy_pool {
type = fail-over
home_server = xxx
home_server = xxx
}
realm ~.+$ {
pool = radiusproxy_pool
nostrip
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client WirelessSW_Dere {
ipaddr = xxx
netmask = 32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "WirelessSW"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client WirelessSW_PRE {
ipaddr = xxx
netmask = 32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "WirelessSW"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = digest
# Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
# Loaded module rlm_always
# Loading module "reject" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Loading module "detail" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail
detail {
filename =
"/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/digest
# Loaded module rlm_dhcp
# Loading module "dhcp" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/dhcp
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/files
files {
filename =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/files/authorize"
acctusersfile =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/files/accounting"
preproxy_usersfile =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/etc2/freeradius/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename =
"/usr/local/etc2/freeradius/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}"
passchange {
}
allow_retry = yes
}
# Loading module "ntlm_auth" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/huntgroups"
hints =
"/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/etc2/freeradius/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = yes
}
# Loading module "realmpercent" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/etc2/freeradius/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/etc2/freeradius/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/utf8
# Loaded module rlm_ldap
# Loading module "ldap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap
ldap {
server = "ldap.unav.es"
identity = "cn=radiusOp,dc=unav,dc=es"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "member"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "ou=radius,o=accounts,dc=unav,dc=es"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = yes
}
}
Creating attribute LDAP-Group
# Loaded module rlm_ippool
# Loading module "VPN_IPSEC_CUN" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool
ippool VPN_IPSEC_CUN {
filename =
"/usr/local/etc2/freeradius/etc/raddb/db.ippool.VPN.IPSEC.CUN"
ip_index =
"/usr/local/etc2/freeradius/etc/raddb/db.ipindex.VPN.IPSEC.CUN"
key = "%{Acct-Session-Id}"
range_start = xxx
range_stop = xxx
netmask = 255.255.255.0
cache_size = 255
override = no
maximum_timeout = 0
}
instantiate {
}
modules {
# Instantiating module "reject" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "detail" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/usr/local/etc2/freeradius/etc/raddb/certs"
pem_file_type = yes
private_key_file =
"/usr/local/etc2/freeradius/etc/raddb/certs/radius.unav.es_privatekey.pem"
certificate_file =
"/usr/local/etc2/freeradius/etc/raddb/certs/radius.unav.es_cert.pem"
ca_file =
"/usr/local/etc2/freeradius/etc/raddb/certs/TERENASSL_PATH.pem"
dh_file = "/usr/local/etc2/freeradius/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/files
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/files/authorize
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/files/users.vpn
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/files/accounting
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
# Instantiating module "pap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file
/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm
# Instantiating module "ldap" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20439
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "VPN_IPSEC_CUN" from file
/usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc2/freeradius/etc/raddb/radiusd.conf
} # server
server default { # from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server status { # from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/status
# Loading authorize {...}
} # server status
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "status"
ipaddr = 127.0.0.1
port = 18121
client admin {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on status address 127.0.0.1 port 18121 bound to server status
Listening on proxy address * port 48633
Listening on proxy address :: port 36571
Ready to process requests
(0) Received Access-Request Id 32 from xxxxxx:45903 to xxx12.225:1812
length 215
(0) User-Name = "oscarrdg(a)unav.es"
(0) NAS-IP-Address = xxx
(0) NAS-Port = 0
(0) NAS-Identifier = "xxx
(0) NAS-Port-Type = Wireless-802.11
(0) Calling-Station-Id = "344DF73C9C98"
(0) Called-Station-Id = "001A1E003250"
(0) Service-Type = Framed-User
(0) Framed-MTU = 1100
(0) EAP-Message = 0x02010015016f7363617272646740756e61762e6573
(0) Aruba-Essid-Name = "eduroam-pre"
(0) Aruba-Location-Id = "10.9.1"
(0) Aruba-AP-Group = "Amigos"
(0) Aruba-Device-Type = "Android"
(0) Message-Authenticator = 0xaf370dcdcf5551f50dbe03c00a1b1a67
(0) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (!&User-Name) {
(0) if (!&User-Name) -> FALSE
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@.*@/ ) {
(0) if (&User-Name =~ /@.*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /(a)\./) {
(0) if (&User-Name =~ /(a)\./) -> FALSE
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxx/auth-detail-20151119
(0) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxx/auth-detail-20151119
(0) auth_log: EXPAND %t
(0) auth_log: --> Thu Nov 19 16:13:11 2015
(0) [auth_log] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(0) suffix: Found realm "~^(.*\.)?unav\.es$"
(0) suffix: Adding Stripped-User-Name = "oscarrdg"
(0) suffix: Adding Realm = "unav.es"
(0) suffix: Authentication realm is LOCAL
(0) [suffix] = ok
(0) ntdomain: Request already has destination realm set. Ignoring
(0) [ntdomain] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 21
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x4a7c50d94a7e547d
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(0) Sent Access-Challenge Id 32 from xxx:1812 to xxx:45903 length 0
(0) EAP-Message = 0x0102001604106a56e58dbbd858bd44f49a49b03bb1d7
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x4a7c50d94a7e547df1395bb8ee5037b2
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 237 from xxxxxx:45903 to xx.225:1812 length
218
(1) User-Name = "oscarrdg(a)unav.es"
(1) NAS-IP-Address = xxxxxx
(1) NAS-Port = 0
(1) NAS-Identifier = "xxxxxx"
(1) NAS-Port-Type = Wireless-802.11
(1) Calling-Station-Id = "344DF73C9C98"
(1) Called-Station-Id = "001A1E003250"
(1) Service-Type = Framed-User
(1) Framed-MTU = 1100
(1) EAP-Message = 0x020200060319
(1) State = 0x4a7c50d94a7e547df1395bb8ee5037b2
(1) Aruba-Essid-Name = "eduroam-pre"
(1) Aruba-Location-Id = "10.9.1"
(1) Aruba-AP-Group = "Amigos"
(1) Aruba-Device-Type = "Android"
(1) Message-Authenticator = 0x84aefd176e8b40d09dbe4a527366c8b7
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (!&User-Name) {
(1) if (!&User-Name) -> FALSE
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@.*@/ ) {
(1) if (&User-Name =~ /@.*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /(a)\./) {
(1) if (&User-Name =~ /(a)\./) -> FALSE
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(1) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(1) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(1) auth_log: EXPAND %t
(1) auth_log: --> Thu Nov 19 16:13:11 2015
(1) [auth_log] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(1) suffix: Found realm "~^(.*\.)?unav\.es$"
(1) suffix: Adding Stripped-User-Name = "oscarrdg"
(1) suffix: Adding Realm = "unav.es"
(1) suffix: Authentication realm is LOCAL
(1) [suffix] = ok
(1) ntdomain: Request already has destination realm set. Ignoring
(1) [ntdomain] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) policy unav.authorize.default {
(1) if ( "%{client:group}" == "wireless" ) {
(1) EXPAND %{client:group}
(1) --> wireless
(1) if ( "%{client:group}" == "wireless" ) -> TRUE
(1) if ( "%{client:group}" == "wireless" ) {
(1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name ==
"eduroam-pre" ) {
(1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name ==
"eduroam-pre" ) -> TRUE
(1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name ==
"eduroam-pre" ) {
(1) policy unav.reject.eduroam.baddomain {
(1) if ( Realm =~ /myabc\.com$/i ) {
(1) if ( Realm =~ /myabc\.com$/i ) -> FALSE
(1) if ( Realm =~
/wlan\.[[:alnum:]]+\.[[:alnum:]]+\.3gppnetwork\.org$/i ) {
(1) if ( Realm =~
/wlan\.[[:alnum:]]+\.[[:alnum:]]+\.3gppnetwork\.org$/i ) -> FALSE
(1) if ( Realm =~ /gmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) {
(1) if ( Realm =~ /gmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i )
-> FALSE
(1) if ( Realm =~ /yahoo\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) {
(1) if ( Realm =~ /yahoo\.co(m|\.[[:alnum:]][[:alnum:]])$/i )
-> FALSE
(1) if ( Realm =~ /hotmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i )
{
(1) if ( Realm =~ /hotmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i
) -> FALSE
(1) } # policy unav.reject.eduroam.baddomain = updated
(1) if ( Service-Type == "Login-User" ) {
(1) if ( Service-Type == "Login-User" ) -> FALSE
(1) } # if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name ==
"eduroam-pre" ) = updated
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping else for request 1: Preceding "if" was taken
(1) } # if ( "%{client:group}" == "wireless" ) = updated
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping elsif for request 1: Preceding "if" was taken
(1) ... skipping else for request 1: Preceding "if" was taken
(1) } # policy unav.authorize.default = updated
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password
is available
(1) [pap] = noop
(1) if (control:Cleartext-Password) {
(1) if (control:Cleartext-Password) -> FALSE
(1) } # authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x4a7c50d94a7e547d
(1) eap: Finished EAP session with state 0x4a7c50d94a7e547d
(1) eap: Previous EAP request found for state 0x4a7c50d94a7e547d, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: Flushing SSL sessions (of #0)
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x4a7c50d94b7f497d
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(1) Sent Access-Challenge Id 237 from xxx12.225:1812 to xxxxxx:45903 length
0
(1) EAP-Message = 0x010300061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x4a7c50d94b7f497df1395bb8ee5037b2
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 126 from xxxxxx:45903 to xxx12.225:1812
length 380
(2) User-Name = "oscarrdg(a)unav.es"
(2) NAS-IP-Address = xxxxxx
(2) NAS-Port = 0
(2) NAS-Identifier = "xxxxxx"
(2) NAS-Port-Type = Wireless-802.11
(2) Calling-Station-Id = "344DF73C9C98"
(2) Called-Station-Id = "001A1E003250"
(2) Service-Type = Framed-User
(2) Framed-MTU = 1100
(2) EAP-Message =
0x020300a819800000009e160301009901000095030389bc40fcda2b3a01d0bd76bc2cd77cc2a31e6d59aa10c82aba3cd714a628ceca00003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff010000
(2) State = 0x4a7c50d94b7f497df1395bb8ee5037b2
(2) Aruba-Essid-Name = "eduroam-pre"
(2) Aruba-Location-Id = "10.9.1"
(2) Aruba-AP-Group = "Amigos"
(2) Aruba-Device-Type = "Android"
(2) Message-Authenticator = 0x5a70fd8f3ee58367fba8226efb8fca04
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (!&User-Name) {
(2) if (!&User-Name) -> FALSE
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@.*@/ ) {
(2) if (&User-Name =~ /@.*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /(a)\./) {
(2) if (&User-Name =~ /(a)\./) -> FALSE
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(2) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(2) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(2) auth_log: EXPAND %t
(2) auth_log: --> Thu Nov 19 16:13:11 2015
(2) [auth_log] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(2) suffix: Found realm "~^(.*\.)?unav\.es$"
(2) suffix: Adding Stripped-User-Name = "oscarrdg"
(2) suffix: Adding Realm = "unav.es"
(2) suffix: Authentication realm is LOCAL
(2) [suffix] = ok
(2) ntdomain: Request already has destination realm set. Ignoring
(2) [ntdomain] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 168
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x4a7c50d94b7f497d
(2) eap: Finished EAP session with state 0x4a7c50d94b7f497d
(2) eap: Previous EAP request found for state 0x4a7c50d94b7f497d, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 158 bytes
(2) eap_peap: Got complete TLS record (158 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< TLS 1.2 [length 0099]
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> TLS 1.2 [length 0059]
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> TLS 1.2 [length 11ce]
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client
certificate A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x4a7c50d94878497d
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(2) Sent Access-Challenge Id 126 from xxx12.225:1812 to xxxxxx:45903 length
0
(2) EAP-Message =
0x010403ec19c00000138c1603030059020000550303564de7077094b72f12c56237fbc9affbe100f088a0685fec0f9239b56ae77d0620e7b0567766cb019801cfbfed0facaa4f74a4e4e1bf48c6e2807b179ab3eab127c03000000dff01000100000b00040300010216030311ce0b0011ca0011c70004a5
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x4a7c50d94878497df1395bb8ee5037b2
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 64 from xxxxxx:45903 to xxx12.225:1812
length 218
(3) User-Name = "oscarrdg(a)unav.es"
(3) NAS-IP-Address = xxxxxx
(3) NAS-Port = 0
(3) NAS-Identifier = "xxxxxx"
(3) NAS-Port-Type = Wireless-802.11
(3) Calling-Station-Id = "344DF73C9C98"
(3) Called-Station-Id = "001A1E003250"
(3) Service-Type = Framed-User
(3) Framed-MTU = 1100
(3) EAP-Message = 0x020400061900
(3) State = 0x4a7c50d94878497df1395bb8ee5037b2
(3) Aruba-Essid-Name = "eduroam-pre"
(3) Aruba-Location-Id = "10.9.1"
(3) Aruba-AP-Group = "Amigos"
(3) Aruba-Device-Type = "Android"
(3) Message-Authenticator = 0x3aec9ff6dcbdf02f48d43f32e48157e4
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (!&User-Name) {
(3) if (!&User-Name) -> FALSE
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@.*@/ ) {
(3) if (&User-Name =~ /@.*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /(a)\./) {
(3) if (&User-Name =~ /(a)\./) -> FALSE
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(3) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(3) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(3) auth_log: EXPAND %t
(3) auth_log: --> Thu Nov 19 16:13:11 2015
(3) [auth_log] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(3) suffix: Found realm "~^(.*\.)?unav\.es$"
(3) suffix: Adding Stripped-User-Name = "oscarrdg"
(3) suffix: Adding Realm = "unav.es"
(3) suffix: Authentication realm is LOCAL
(3) [suffix] = ok
(3) ntdomain: Request already has destination realm set. Ignoring
(3) [ntdomain] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x4a7c50d94878497d
(3) eap: Finished EAP session with state 0x4a7c50d94878497d
(3) eap: Previous EAP request found for state 0x4a7c50d94878497d, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0x4a7c50d94979497d
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(3) Sent Access-Challenge Id 64 from xxx12.225:1812 to xxxxxx:45903 length 0
(3) EAP-Message =
0x010503e819402e73692e756e61762e6573820f7261646975732e756e61762e656475300d06092a864886f70d010105050003820101008d5a00339dca417d4b5b7c98c5d05763925d58ea76ff6431c64313da556a5d759f867846b256881352385407721c3b81539755438573a805ecb0acdf0a94a9f874
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x4a7c50d94979497df1395bb8ee5037b2
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 234 from xxxxxx:45903 to xxx12.225:1812
length 218
(4) User-Name = "oscarrdg(a)unav.es"
(4) NAS-IP-Address = xxxxxx
(4) NAS-Port = 0
(4) NAS-Identifier = "xxxxxx"
(4) NAS-Port-Type = Wireless-802.11
(4) Calling-Station-Id = "344DF73C9C98"
(4) Called-Station-Id = "001A1E003250"
(4) Service-Type = Framed-User
(4) Framed-MTU = 1100
(4) EAP-Message = 0x020500061900
(4) State = 0x4a7c50d94979497df1395bb8ee5037b2
(4) Aruba-Essid-Name = "eduroam-pre"
(4) Aruba-Location-Id = "10.9.1"
(4) Aruba-AP-Group = "Amigos"
(4) Aruba-Device-Type = "Android"
(4) Message-Authenticator = 0x8a034f3911b75ff877975ad4bec02ff4
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (!&User-Name) {
(4) if (!&User-Name) -> FALSE
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@.*@/ ) {
(4) if (&User-Name =~ /@.*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /(a)\./) {
(4) if (&User-Name =~ /(a)\./) -> FALSE
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(4) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(4) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(4) auth_log: EXPAND %t
(4) auth_log: --> Thu Nov 19 16:13:11 2015
(4) [auth_log] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(4) suffix: Found realm "~^(.*\.)?unav\.es$"
(4) suffix: Adding Stripped-User-Name = "oscarrdg"
(4) suffix: Adding Realm = "unav.es"
(4) suffix: Authentication realm is LOCAL
(4) [suffix] = ok
(4) ntdomain: Request already has destination realm set. Ignoring
(4) [ntdomain] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x4a7c50d94979497d
(4) eap: Finished EAP session with state 0x4a7c50d94979497d
(4) eap: Previous EAP request found for state 0x4a7c50d94979497d, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 1000
(4) eap: EAP session adding &reply:State = 0x4a7c50d94e7a497d
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(4) Sent Access-Challenge Id 234 from xxx12.225:1812 to xxxxxx:45903 length
0
(4) EAP-Message =
0x010603e8194002010030180603551d200411300f300d060b2b06010401b2310102021d30440603551d1f043d303b3039a037a0358633687474703a2f2f63726c2e7573657274727573742e636f6d2f55544e2d5553455246697273742d48617264776172652e63726c307406082b060105050701010468
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x4a7c50d94e7a497df1395bb8ee5037b2
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 230 from xxxxxx:45903 to xxx12.225:1812
length 218
(5) User-Name = "oscarrdg(a)unav.es"
(5) NAS-IP-Address = xxxxxx
(5) NAS-Port = 0
(5) NAS-Identifier = "xxxxxx"
(5) NAS-Port-Type = Wireless-802.11
(5) Calling-Station-Id = "344DF73C9C98"
(5) Called-Station-Id = "001A1E003250"
(5) Service-Type = Framed-User
(5) Framed-MTU = 1100
(5) EAP-Message = 0x020600061900
(5) State = 0x4a7c50d94e7a497df1395bb8ee5037b2
(5) Aruba-Essid-Name = "eduroam-pre"
(5) Aruba-Location-Id = "10.9.1"
(5) Aruba-AP-Group = "Amigos"
(5) Aruba-Device-Type = "Android"
(5) Message-Authenticator = 0x27a324ae82db56460d95f8e34748e3a8
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (!&User-Name) {
(5) if (!&User-Name) -> FALSE
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@.*@/ ) {
(5) if (&User-Name =~ /@.*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /(a)\./) {
(5) if (&User-Name =~ /(a)\./) -> FALSE
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(5) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(5) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(5) auth_log: EXPAND %t
(5) auth_log: --> Thu Nov 19 16:13:11 2015
(5) [auth_log] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(5) suffix: Found realm "~^(.*\.)?unav\.es$"
(5) suffix: Adding Stripped-User-Name = "oscarrdg"
(5) suffix: Adding Realm = "unav.es"
(5) suffix: Authentication realm is LOCAL
(5) [suffix] = ok
(5) ntdomain: Request already has destination realm set. Ignoring
(5) [ntdomain] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x4a7c50d94e7a497d
(5) eap: Finished EAP session with state 0x4a7c50d94e7a497d
(5) eap: Previous EAP request found for state 0x4a7c50d94e7a497d, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment
(5) eap_peap: [eaptls verify] = request
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 1000
(5) eap: EAP session adding &reply:State = 0x4a7c50d94f7b497d
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(5) Sent Access-Challenge Id 230 from xxx12.225:1812 to xxxxxx:45903 length
0
(5) EAP-Message =
0x010703e8194007386ec3a55e23bc459b7b50c1c9308fdbe52b7ad35bfb33401ea0d59817bc8b87c389d35da08eb2aaaaf68e698806c5fa8921f3089d692e09339b290d460f8ccc4934b06951bdf906cd68ad664cbc3eac61bd0a880ec8df3dee7c044c9d0a5e6b91d6eec7ed288dab4d878973d06ea4d0
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x4a7c50d94f7b497df1395bb8ee5037b2
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 168 from xxxxxx:45903 to xxx12.225:1812
length 218
(6) User-Name = "oscarrdg(a)unav.es"
(6) NAS-IP-Address = xxxxxx
(6) NAS-Port = 0
(6) NAS-Identifier = "xxxxxx"
(6) NAS-Port-Type = Wireless-802.11
(6) Calling-Station-Id = "344DF73C9C98"
(6) Called-Station-Id = "001A1E003250"
(6) Service-Type = Framed-User
(6) Framed-MTU = 1100
(6) EAP-Message = 0x020700061900
(6) State = 0x4a7c50d94f7b497df1395bb8ee5037b2
(6) Aruba-Essid-Name = "eduroam-pre"
(6) Aruba-Location-Id = "10.9.1"
(6) Aruba-AP-Group = "Amigos"
(6) Aruba-Device-Type = "Android"
(6) Message-Authenticator = 0x4cf19771edbbc663364c4e61d84ea4ca
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (!&User-Name) {
(6) if (!&User-Name) -> FALSE
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@.*@/ ) {
(6) if (&User-Name =~ /@.*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /(a)\./) {
(6) if (&User-Name =~ /(a)\./) -> FALSE
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(6) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(6) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(6) auth_log: EXPAND %t
(6) auth_log: --> Thu Nov 19 16:13:11 2015
(6) [auth_log] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(6) suffix: Found realm "~^(.*\.)?unav\.es$"
(6) suffix: Adding Stripped-User-Name = "oscarrdg"
(6) suffix: Adding Realm = "unav.es"
(6) suffix: Authentication realm is LOCAL
(6) [suffix] = ok
(6) ntdomain: Request already has destination realm set. Ignoring
(6) [ntdomain] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 6
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x4a7c50d94f7b497d
(6) eap: Finished EAP session with state 0x4a7c50d94f7b497d
(6) eap: Previous EAP request found for state 0x4a7c50d94f7b497d, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment
(6) eap_peap: [eaptls verify] = request
(6) eap_peap: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 8 length 1000
(6) eap: EAP session adding &reply:State = 0x4a7c50d94c74497d
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(6) Sent Access-Challenge Id 168 from xxx12.225:1812 to xxxxxx:45903 length
0
(6) EAP-Message =
0x010803e81940e8329e74cac89054e9c65f0f789d9a403c0eac61aa5e148f9e87a16a50dcd79a4eaf05b3a671949c71b350600ac7139d38078602a8e9a869261890ab4cb04f23ab3a4f84d8dfce9fe1696fbbd742d76b44e4c7adee6d415f725a710837b37965a459a09437f7002f0dc29272dad03872db
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x4a7c50d94c74497df1395bb8ee5037b2
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 112 from xxxxxx:45903 to xxx12.225:1812
length 218
(7) User-Name = "oscarrdg(a)unav.es"
(7) NAS-IP-Address = xxxxxx
(7) NAS-Port = 0
(7) NAS-Identifier = "xxxxxx"
(7) NAS-Port-Type = Wireless-802.11
(7) Calling-Station-Id = "344DF73C9C98"
(7) Called-Station-Id = "001A1E003250"
(7) Service-Type = Framed-User
(7) Framed-MTU = 1100
(7) EAP-Message = 0x020800061900
(7) State = 0x4a7c50d94c74497df1395bb8ee5037b2
(7) Aruba-Essid-Name = "eduroam-pre"
(7) Aruba-Location-Id = "10.9.1"
(7) Aruba-AP-Group = "Amigos"
(7) Aruba-Device-Type = "Android"
(7) Message-Authenticator = 0x15bf70b018be20dac76d5bdc4532dc08
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (!&User-Name) {
(7) if (!&User-Name) -> FALSE
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@.*@/ ) {
(7) if (&User-Name =~ /@.*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /(a)\./) {
(7) if (&User-Name =~ /(a)\./) -> FALSE
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(7) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(7) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(7) auth_log: EXPAND %t
(7) auth_log: --> Thu Nov 19 16:13:11 2015
(7) [auth_log] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(7) suffix: Found realm "~^(.*\.)?unav\.es$"
(7) suffix: Adding Stripped-User-Name = "oscarrdg"
(7) suffix: Adding Realm = "unav.es"
(7) suffix: Authentication realm is LOCAL
(7) [suffix] = ok
(7) ntdomain: Request already has destination realm set. Ignoring
(7) [ntdomain] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 6
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x4a7c50d94c74497d
(7) eap: Finished EAP session with state 0x4a7c50d94c74497d
(7) eap: Previous EAP request found for state 0x4a7c50d94c74497d, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: Peer ACKed our handshake fragment
(7) eap_peap: [eaptls verify] = request
(7) eap_peap: [eaptls process] = handled
(7) eap: Sending EAP Request (code 1) ID 9 length 40
(7) eap: EAP session adding &reply:State = 0x4a7c50d94d75497d
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(7) Sent Access-Challenge Id 112 from xxx12.225:1812 to xxxxxx:45903 length
0
(7) EAP-Message =
0x0109002819007b286bccc4f4c141f4ea5ef8a1b16dd15183d01b5b81d5a4c616030300040e000000
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x4a7c50d94d75497df1395bb8ee5037b2
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 251 from xxxxxx:45903 to xxx12.225:1812
length 348
(8) User-Name = "oscarrdg(a)unav.es"
(8) NAS-IP-Address = xxxxxx
(8) NAS-Port = 0
(8) NAS-Identifier = "xxxxxx"
(8) NAS-Port-Type = Wireless-802.11
(8) Calling-Station-Id = "344DF73C9C98"
(8) Called-Station-Id = "001A1E003250"
(8) Service-Type = Framed-User
(8) Framed-MTU = 1100
(8) EAP-Message =
0x0209008819800000007e160303004610000042410497d6d49495961db556fda8b469384d890ed741e0f137449e864c9a78bac1d3300980cf8556274e7270cfd6d411d7dee9cd216a49a794311cb559d577fdbeb832140303000101160303002800000000000000001e3ac64ea847ecf6941ba645884a54
(8) State = 0x4a7c50d94d75497df1395bb8ee5037b2
(8) Aruba-Essid-Name = "eduroam-pre"
(8) Aruba-Location-Id = "10.9.1"
(8) Aruba-AP-Group = "Amigos"
(8) Aruba-Device-Type = "Android"
(8) Message-Authenticator = 0x863b805103353c3f87d71a7ead7cb041
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (!&User-Name) {
(8) if (!&User-Name) -> FALSE
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@.*@/ ) {
(8) if (&User-Name =~ /@.*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /(a)\./) {
(8) if (&User-Name =~ /(a)\./) -> FALSE
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(8) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(8) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(8) auth_log: EXPAND %t
(8) auth_log: --> Thu Nov 19 16:13:11 2015
(8) [auth_log] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(8) suffix: Found realm "~^(.*\.)?unav\.es$"
(8) suffix: Adding Stripped-User-Name = "oscarrdg"
(8) suffix: Adding Realm = "unav.es"
(8) suffix: Authentication realm is LOCAL
(8) [suffix] = ok
(8) ntdomain: Request already has destination realm set. Ignoring
(8) [ntdomain] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 136
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x4a7c50d94d75497d
(8) eap: Finished EAP session with state 0x4a7c50d94d75497d
(8) eap: Previous EAP request found for state 0x4a7c50d94d75497d, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(8) eap_peap: Got complete TLS record (126 bytes)
(8) eap_peap: [eaptls verify] = length included
(8) eap_peap: <<< TLS 1.2 [length 0046]
(8) eap_peap: TLS_accept: SSLv3 read client key exchange A
(8) eap_peap: <<< TLS 1.2 [length 0001]
(8) eap_peap: <<< TLS 1.2 [length 0010]
(8) eap_peap: TLS_accept: SSLv3 read finished A
(8) eap_peap: >>> TLS 1.2 [length 0001]
(8) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(8) eap_peap: >>> TLS 1.2 [length 0010]
(8) eap_peap: TLS_accept: SSLv3 write finished A
(8) eap_peap: TLS_accept: SSLv3 flush data
(8) eap_peap: (other): SSL negotiation finished successfully
(8) eap_peap: SSL Connection Established
(8) eap_peap: [eaptls process] = handled
(8) eap: Sending EAP Request (code 1) ID 10 length 57
(8) eap: EAP session adding &reply:State = 0x4a7c50d94276497d
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found. Ignoring.
(8) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(8) Sent Access-Challenge Id 251 from xxx12.225:1812 to xxxxxx:45903 length
0
(8) EAP-Message =
0x010a0039190014030300010116030300286a2a84ab3ae80e62498198297caa9815c5334160580029e175eff17a7ecb2046472a0c0a01428bea
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x4a7c50d94276497df1395bb8ee5037b2
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 182 from xxxxxx:45903 to xxx12.225:1812
length 218
(9) User-Name = "oscarrdg(a)unav.es"
(9) NAS-IP-Address = xxxxxx
(9) NAS-Port = 0
(9) NAS-Identifier = "xxxxxx"
(9) NAS-Port-Type = Wireless-802.11
(9) Calling-Station-Id = "344DF73C9C98"
(9) Called-Station-Id = "001A1E003250"
(9) Service-Type = Framed-User
(9) Framed-MTU = 1100
(9) EAP-Message = 0x020a00061900
(9) State = 0x4a7c50d94276497df1395bb8ee5037b2
(9) Aruba-Essid-Name = "eduroam-pre"
(9) Aruba-Location-Id = "10.9.1"
(9) Aruba-AP-Group = "Amigos"
(9) Aruba-Device-Type = "Android"
(9) Message-Authenticator = 0x87e40768b0a6aedf20a4315cfe75d952
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (!&User-Name) {
(9) if (!&User-Name) -> FALSE
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@.*@/ ) {
(9) if (&User-Name =~ /@.*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /(a)\./) {
(9) if (&User-Name =~ /(a)\./) -> FALSE
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(9) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(9) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(9) auth_log: EXPAND %t
(9) auth_log: --> Thu Nov 19 16:13:11 2015
(9) [auth_log] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(9) suffix: Found realm "~^(.*\.)?unav\.es$"
(9) suffix: Adding Stripped-User-Name = "oscarrdg"
(9) suffix: Adding Realm = "unav.es"
(9) suffix: Authentication realm is LOCAL
(9) [suffix] = ok
(9) ntdomain: Request already has destination realm set. Ignoring
(9) [ntdomain] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 6
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x4a7c50d94276497d
(9) eap: Finished EAP session with state 0x4a7c50d94276497d
(9) eap: Previous EAP request found for state 0x4a7c50d94276497d, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(9) eap_peap: [eaptls verify] = success
(9) eap_peap: [eaptls process] = success
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state TUNNEL ESTABLISHED
(9) eap: Sending EAP Request (code 1) ID 11 length 40
(9) eap: EAP session adding &reply:State = 0x4a7c50d94377497d
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) Post-Auth-Type sub-section not found. Ignoring.
(9) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(9) Sent Access-Challenge Id 182 from xxx12.225:1812 to xxxxxx:45903 length
0
(9) EAP-Message =
0x010b00281900170303001d6a2a84ab3ae80e6307de0ca3236f93adbf36e1a25d41545a9a71de0be3
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0x4a7c50d94377497df1395bb8ee5037b2
(9) Finished request
Waking up in 4.8 seconds.
(10) Received Access-Request Id 92 from xxxxxx:45903 to xxx12.225:1812
length 264
(10) User-Name = "oscarrdg(a)unav.es"
(10) NAS-IP-Address = xxxxxx
(10) NAS-Port = 0
(10) NAS-Identifier = "xxxxxx"
(10) NAS-Port-Type = Wireless-802.11
(10) Calling-Station-Id = "344DF73C9C98"
(10) Called-Station-Id = "001A1E003250"
(10) Service-Type = Framed-User
(10) Framed-MTU = 1100
(10) EAP-Message =
0x020b00341900170303002900000000000000019b4ab8036a75b9c14b9fbef72722cf152e7eae150e66cd2df891b0db7b49041513
(10) State = 0x4a7c50d94377497df1395bb8ee5037b2
(10) Aruba-Essid-Name = "eduroam-pre"
(10) Aruba-Location-Id = "10.9.1"
(10) Aruba-AP-Group = "Amigos"
(10) Aruba-Device-Type = "Android"
(10) Message-Authenticator = 0x3ed798db1779514513dd6cf8a43755bc
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(10) authorize {
(10) policy filter_username {
(10) if (!&User-Name) {
(10) if (!&User-Name) -> FALSE
(10) if (&User-Name =~ / /) {
(10) if (&User-Name =~ / /) -> FALSE
(10) if (&User-Name =~ /@.*@/ ) {
(10) if (&User-Name =~ /@.*@/ ) -> FALSE
(10) if (&User-Name =~ /\.\./ ) {
(10) if (&User-Name =~ /\.\./ ) -> FALSE
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(10) if (&User-Name =~ /\.$/) {
(10) if (&User-Name =~ /\.$/) -> FALSE
(10) if (&User-Name =~ /(a)\./) {
(10) if (&User-Name =~ /(a)\./) -> FALSE
(10) } # policy filter_username = notfound
(10) [preprocess] = ok
(10) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(10) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(10) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(10) auth_log: EXPAND %t
(10) auth_log: --> Thu Nov 19 16:13:11 2015
(10) [auth_log] = ok
(10) [chap] = noop
(10) [mschap] = noop
(10) [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(10) suffix: Found realm "~^(.*\.)?unav\.es$"
(10) suffix: Adding Stripped-User-Name = "oscarrdg"
(10) suffix: Adding Realm = "unav.es"
(10) suffix: Authentication realm is LOCAL
(10) [suffix] = ok
(10) ntdomain: Request already has destination realm set. Ignoring
(10) [ntdomain] = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 52
(10) eap: Continuing tunnel setup
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(10) authenticate {
(10) eap: Expiring EAP session with state 0x4a7c50d94377497d
(10) eap: Finished EAP session with state 0x4a7c50d94377497d
(10) eap: Previous EAP request found for state 0x4a7c50d94377497d, released
from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established. Decoding tunneled attributes
(10) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(10) eap_peap: Identity - oscarrdg(a)unav.es
(10) eap_peap: Got inner identity 'oscarrdg(a)unav.es'
(10) eap_peap: Setting default EAP type for tunneled EAP session
(10) eap_peap: Got tunneled request
(10) eap_peap: EAP-Message = 0x020b0015016f7363617272646740756e61762e6573
(10) eap_peap: Setting User-Name to oscarrdg(a)unav.es
(10) eap_peap: Sending tunneled request to inner-tunnel
(10) eap_peap: EAP-Message = 0x020b0015016f7363617272646740756e61762e6573
(10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(10) eap_peap: User-Name = "oscarrdg(a)unav.es"
(10) eap_peap: NAS-IP-Address = xxxxxx
(10) eap_peap: NAS-Port = 0
(10) eap_peap: NAS-Identifier = "xxxxxx"
(10) eap_peap: NAS-Port-Type = Wireless-802.11
(10) eap_peap: Calling-Station-Id = "344DF73C9C98"
(10) eap_peap: Called-Station-Id = "001A1E003250"
(10) eap_peap: Service-Type = Framed-User
(10) eap_peap: Framed-MTU = 1100
(10) eap_peap: Aruba-Essid-Name = "eduroam-pre"
(10) eap_peap: Aruba-Location-Id = "10.9.1"
(10) eap_peap: Aruba-AP-Group = "Amigos"
(10) eap_peap: Aruba-Device-Type = "Android"
(10) eap_peap: Event-Timestamp = "Nov 19 2015 16:13:11 CET"
(10) Virtual server inner-tunnel received request
(10) EAP-Message = 0x020b0015016f7363617272646740756e61762e6573
(10) FreeRADIUS-Proxied-To = 127.0.0.1
(10) User-Name = "oscarrdg(a)unav.es"
(10) NAS-IP-Address = xxxxxx
(10) NAS-Port = 0
(10) NAS-Identifier = "xxxxxx"
(10) NAS-Port-Type = Wireless-802.11
(10) Calling-Station-Id = "344DF73C9C98"
(10) Called-Station-Id = "001A1E003250"
(10) Service-Type = Framed-User
(10) Framed-MTU = 1100
(10) Aruba-Essid-Name = "eduroam-pre"
(10) Aruba-Location-Id = "10.9.1"
(10) Aruba-AP-Group = "Amigos"
(10) Aruba-Device-Type = "Android"
(10) Event-Timestamp = "Nov 19 2015 16:13:11 CET"
(10) server inner-tunnel {
(10) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
(10) authorize {
(10) [chap] = noop
(10) [mschap] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(10) suffix: Found realm "~^(.*\.)?unav\.es$"
(10) suffix: Adding Stripped-User-Name = "oscarrdg"
(10) suffix: Adding Realm = "unav.es"
(10) suffix: Authentication realm is LOCAL
(10) [suffix] = ok
(10) ntdomain: Request already has destination realm set. Ignoring
(10) [ntdomain] = noop
(10) update control {
(10) &Proxy-To-Realm := LOCAL
(10) } # update control = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 21
(10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
(10) authenticate {
(10) eap: Peer sent packet with method EAP Identity (1)
(10) eap: Calling submodule eap_mschapv2 to process data
(10) eap_mschapv2: Issuing Challenge
(10) eap: Sending EAP Request (code 1) ID 12 length 43
(10) eap: EAP session adding &reply:State = 0x739669f1739a7348
(10) [eap] = handled
(10) } # authenticate = handled
(10) } # server inner-tunnel
(10) Virtual server sending reply
(10) EAP-Message =
0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) State = 0x739669f1739a7348a02455fb687f2caa
(10) eap_peap: Got tunneled reply code 11
(10) eap_peap: EAP-Message =
0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130
(10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(10) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa
(10) eap_peap: Got tunneled reply RADIUS code 11
(10) eap_peap: EAP-Message =
0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130
(10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(10) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa
(10) eap_peap: Got tunneled Access-Challenge
(10) eap: Sending EAP Request (code 1) ID 12 length 74
(10) eap: EAP session adding &reply:State = 0x4a7c50d94070497d
(10) [eap] = handled
(10) } # authenticate = handled
(10) Using Post-Auth-Type Challenge
(10) Post-Auth-Type sub-section not found. Ignoring.
(10) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(10) Sent Access-Challenge Id 92 from xxx12.225:1812 to xxxxxx:45903 length
0
(10) EAP-Message =
0x010c004a1900170303003f6a2a84ab3ae80e6445376747acac3a67092800521bd121ed59a9f1d8a3e4558a30aea29eae313c5e6b4befec0d80e2fbdd0f7c8ce5d3d791f671f36e56facd
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) State = 0x4a7c50d94070497df1395bb8ee5037b2
(10) Finished request
Waking up in 4.8 seconds.
(11) Received Access-Request Id 240 from xxxxxx:45903 to xxx12.225:1812
length 318
(11) User-Name = "oscarrdg(a)unav.es"
(11) NAS-IP-Address = xxxxxx
(11) NAS-Port = 0
(11) NAS-Identifier = "xxxxxx"
(11) NAS-Port-Type = Wireless-802.11
(11) Calling-Station-Id = "344DF73C9C98"
(11) Called-Station-Id = "001A1E003250"
(11) Service-Type = Framed-User
(11) Framed-MTU = 1100
(11) EAP-Message =
0x020c006a1900170303005f000000000000000253f426d0e803b2f101d786b3751058056be43652b9dfc3ef648ed4fa31005509bd18cfeea0fae8d7c1e20a69507c7355e0f78b6d034f70f812ce1d73e78815d519b082725844b86344c1ae97ccd9d6232d64a6c67831e3
(11) State = 0x4a7c50d94070497df1395bb8ee5037b2
(11) Aruba-Essid-Name = "eduroam-pre"
(11) Aruba-Location-Id = "10.9.1"
(11) Aruba-AP-Group = "Amigos"
(11) Aruba-Device-Type = "Android"
(11) Message-Authenticator = 0xfc041f435db6453937530e6ad7ad9998
(11) session-state: No cached attributes
(11) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(11) authorize {
(11) policy filter_username {
(11) if (!&User-Name) {
(11) if (!&User-Name) -> FALSE
(11) if (&User-Name =~ / /) {
(11) if (&User-Name =~ / /) -> FALSE
(11) if (&User-Name =~ /@.*@/ ) {
(11) if (&User-Name =~ /@.*@/ ) -> FALSE
(11) if (&User-Name =~ /\.\./ ) {
(11) if (&User-Name =~ /\.\./ ) -> FALSE
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) {
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) ->
FALSE
(11) if (&User-Name =~ /\.$/) {
(11) if (&User-Name =~ /\.$/) -> FALSE
(11) if (&User-Name =~ /(a)\./) {
(11) if (&User-Name =~ /(a)\./) -> FALSE
(11) } # policy filter_username = notfound
(11) [preprocess] = ok
(11) auth_log: EXPAND
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(11) auth_log: -->
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(11) auth_log:
/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to
/usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119
(11) auth_log: EXPAND %t
(11) auth_log: --> Thu Nov 19 16:13:11 2015
(11) [auth_log] = ok
(11) [chap] = noop
(11) [mschap] = noop
(11) [digest] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(11) suffix: Found realm "~^(.*\.)?unav\.es$"
(11) suffix: Adding Stripped-User-Name = "oscarrdg"
(11) suffix: Adding Realm = "unav.es"
(11) suffix: Authentication realm is LOCAL
(11) [suffix] = ok
(11) ntdomain: Request already has destination realm set. Ignoring
(11) [ntdomain] = noop
(11) eap: Peer sent EAP Response (code 2) ID 12 length 106
(11) eap: Continuing tunnel setup
(11) [eap] = ok
(11) } # authorize = ok
(11) Found Auth-Type = EAP
(11) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(11) authenticate {
(11) eap: Expiring EAP session with state 0x739669f1739a7348
(11) eap: Finished EAP session with state 0x4a7c50d94070497d
(11) eap: Previous EAP request found for state 0x4a7c50d94070497d, released
from the list
(11) eap: Peer sent packet with method EAP PEAP (25)
(11) eap: Calling submodule eap_peap to process data
(11) eap_peap: Continuing EAP-TLS
(11) eap_peap: [eaptls verify] = ok
(11) eap_peap: Done initial handshake
(11) eap_peap: [eaptls process] = ok
(11) eap_peap: Session established. Decoding tunneled attributes
(11) eap_peap: PEAP state phase2
(11) eap_peap: EAP method MSCHAPv2 (26)
(11) eap_peap: Got tunneled request
(11) eap_peap: EAP-Message =
0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573
(11) eap_peap: Setting User-Name to oscarrdg(a)unav.es
(11) eap_peap: Sending tunneled request to inner-tunnel
(11) eap_peap: EAP-Message =
0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573
(11) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(11) eap_peap: User-Name = "oscarrdg(a)unav.es"
(11) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa
(11) eap_peap: NAS-IP-Address = xxxxxx
(11) eap_peap: NAS-Port = 0
(11) eap_peap: NAS-Identifier = "xxxxxx"
(11) eap_peap: NAS-Port-Type = Wireless-802.11
(11) eap_peap: Calling-Station-Id = "344DF73C9C98"
(11) eap_peap: Called-Station-Id = "001A1E003250"
(11) eap_peap: Service-Type = Framed-User
(11) eap_peap: Framed-MTU = 1100
(11) eap_peap: Aruba-Essid-Name = "eduroam-pre"
(11) eap_peap: Aruba-Location-Id = "10.9.1"
(11) eap_peap: Aruba-AP-Group = "Amigos"
(11) eap_peap: Aruba-Device-Type = "Android"
(11) eap_peap: Event-Timestamp = "Nov 19 2015 16:13:11 CET"
(11) Virtual server inner-tunnel received request
(11) EAP-Message =
0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573
(11) FreeRADIUS-Proxied-To = 127.0.0.1
(11) User-Name = "oscarrdg(a)unav.es"
(11) State = 0x739669f1739a7348a02455fb687f2caa
(11) NAS-IP-Address = xxxxxx
(11) NAS-Port = 0
(11) NAS-Identifier = "xxxxxx"
(11) NAS-Port-Type = Wireless-802.11
(11) Calling-Station-Id = "344DF73C9C98"
(11) Called-Station-Id = "001A1E003250"
(11) Service-Type = Framed-User
(11) Framed-MTU = 1100
(11) Aruba-Essid-Name = "eduroam-pre"
(11) Aruba-Location-Id = "10.9.1"
(11) Aruba-AP-Group = "Amigos"
(11) Aruba-Device-Type = "Android"
(11) Event-Timestamp = "Nov 19 2015 16:13:11 CET"
(11) server inner-tunnel {
(11) session-state: No cached attributes
(11) # Executing section authorize from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
(11) authorize {
(11) [chap] = noop
(11) [mschap] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es"
(11) suffix: Found realm "~^(.*\.)?unav\.es$"
(11) suffix: Adding Stripped-User-Name = "oscarrdg"
(11) suffix: Adding Realm = "unav.es"
(11) suffix: Authentication realm is LOCAL
(11) [suffix] = ok
(11) ntdomain: Request already has destination realm set. Ignoring
(11) [ntdomain] = noop
(11) update control {
(11) &Proxy-To-Realm := LOCAL
(11) } # update control = noop
(11) eap: Peer sent EAP Response (code 2) ID 12 length 75
(11) eap: No EAP Start, assuming it's an on-going EAP conversation
(11) [eap] = updated
(11) policy unav.authorize.inner {
(11) if ( "%{client:group}" == 'wireless' ) {
(11) EXPAND %{client:group}
(11) --> wireless
(11) if ( "%{client:group}" == 'wireless' ) -> TRUE
(11) if ( "%{client:group}" == 'wireless' ) {
(11) policy unav.reject.otherdomain {
(11) if ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ ||
Realm == "UNAV-PDC-01" ) {
(11) if ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ ||
Realm == "UNAV-PDC-01" ) -> TRUE
(11) ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ || Realm
== "UNAV-PDC-01" ) { ... } # empty sub-section is ignored
(11) ... skipping else for request 11: Preceding "if" was taken
(11) } # policy unav.reject.otherdomain = updated
(11) policy unav.reject.bloqueado {
(11) if ( Ldap-Group == "unav.radius.bloqueado" ) {
(11) Searching for user in group "unav.radius.bloqueado"
rlm_ldap (ldap): Reserved connection (0)
(11) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(11) --> (uid=oscarrdg)
(11) Performing search in "ou=radius,o=accounts,dc=unav,dc=es"
with filter "(uid=oscarrdg)", scope "sub"
(11) Waiting for search result...
(11) User object found at DN
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es"
(11) Checking user object's member attributes
(11) Performing unfiltered search in
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base"
(11) Waiting for search result...
(11) Processing member value
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ssl"
(11) Processing member value
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as
a DN
(11) Resolving group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.eapol.n1"
(11) Processing member value
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.wifi.n1"
(11) Processing member value
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
as a DN
(11) Resolving group DN
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
to group name
(11) Performing unfiltered search in "uid=
unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope
"base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ssl.si"
(11) Processing member value
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as
a DN
(11) Resolving group DN
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ipsec"
rlm_ldap (ldap): Released connection (0)
rlm_ldap (ldap): Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389
TLS: certificate [CN=AddTrust External CA Root,OU=AddTrust External TTP
Network,O=AddTrust AB,C=SE] is not valid - error -8172:Peer's certificate
issuer has been marked as not trusted by the user..
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(11) User is not a member of "unav.radius.bloqueado"
(11) if ( Ldap-Group == "unav.radius.bloqueado" ) -> FALSE
(11) } # policy unav.reject.bloqueado = updated
rlm_ldap (ldap): Reserved connection (1)
(11) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(11) ldap: --> (uid=oscarrdg)
(11) ldap: Performing search in "ou=radius,o=accounts,dc=unav,dc=es" with
filter "(uid=oscarrdg)", scope "sub"
(11) ldap: Waiting for search result...
(11) ldap: User object found at DN
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es"
(11) ldap: Processing user attributes
(11) ldap: control:Password-With-Header +=
'{sha}0sURRyN1nxp/BMx+Q5nBqwR7CB0='
rlm_ldap (ldap): Released connection (1)
(11) [ldap] = updated
(11) update reply {
(11) EXPAND %{request:User-Name}
(11) --> oscarrdg(a)unav.es
(11) &User-Name = oscarrdg(a)unav.es
(11) } # update reply = noop
(11) if ( Ldap-Group == "unav.radius.wifi.all" ) {
(11) Searching for user in group "unav.radius.wifi.all"
rlm_ldap (ldap): Reserved connection (2)
(11) Using user DN from request
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es"
(11) Checking user object's member attributes
(11) Performing unfiltered search in
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base"
(11) Waiting for search result...
(11) Processing member value
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ssl"
(11) Processing member value
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as
a DN
(11) Resolving group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.eapol.n1"
(11) Processing member value
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.wifi.n1"
(11) Processing member value
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
as a DN
(11) Resolving group DN
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
to group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ssl.si"
(11) Processing member value
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as
a DN
(11) Resolving group DN
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ipsec"
rlm_ldap (ldap): Released connection (2)
(11) User is not a member of "unav.radius.wifi.all"
(11) if ( Ldap-Group == "unav.radius.wifi.all" ) -> FALSE
(11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) {
(11) Searching for user in group "unav.radius.wifi.n1"
rlm_ldap (ldap): Reserved connection (3)
(11) Using user DN from request
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es"
(11) Checking user object's member attributes
(11) Performing unfiltered search in
"uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base"
(11) Waiting for search result...
(11) Processing member value
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.vpn.ssl"
(11) Processing member value
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as
a DN
(11) Resolving group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.eapol.n1"
(11) Processing member value
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a
DN
(11) Resolving group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to
group name
(11) Performing unfiltered search in
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es",
scope "base"
(11) Waiting for search result...
(11) Group DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es"
resolves to name "unav.radius.wifi.n1"
(11) User found in group "unav.radius.wifi.n1". Comparison
between membership: name (resolved from DN
"uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,d?"),
check: name
rlm_ldap (ldap): Released connection (3)
(11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) -> TRUE
(11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) {
(11) update reply {
(11) &Reply-Message += 'role.n1'
(11) &Aruba-User-Role := 'role.n1'
(11) } # update reply = noop
(11) } # elsif ( Ldap-Group == "unav.radius.wifi.n1" ) = noop
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping else for request 11: Preceding "if" was taken
(11) } # if ( "%{client:group}" == 'wireless' ) = updated
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping elsif for request 11: Preceding "if" was taken
(11) ... skipping else for request 11: Preceding "if" was taken
(11) } # policy unav.authorize.inner = updated
(11) [expiration] = noop
(11) [logintime] = noop
(11) pap: Converted: Password-With-Header -> SHA1-Password
(11) pap: Removing &control:Password-With-Header
(11) pap: Normalizing SHA1-Password from base64 encoding, 28 bytes -> 20
bytes
(11) pap: WARNING: Auth-Type already set. Not setting to PAP
(11) [pap] = noop
(11) if (control:Cleartext-Password) {
(11) if (control:Cleartext-Password) -> FALSE
(11) } # authorize = updated
(11) Found Auth-Type = EAP
(11) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
(11) authenticate {
(11) eap: Expiring EAP session with state 0x739669f1739a7348
(11) eap: Finished EAP session with state 0x739669f1739a7348
(11) eap: Previous EAP request found for state 0x739669f1739a7348, released
from the list
(11) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(11) eap: Calling submodule eap_mschapv2 to process data
(11) eap_mschapv2: # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel
(11) eap_mschapv2: Auth-Type MS-CHAP {
(11) mschap: Creating challenge hash with username: oscarrdg(a)unav.es
(11) mschap: Client is using MS-CHAPv2
(11) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}:
(11) mschap: EXPAND
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
(11) mschap: --> --username=oscarrdg
(11) mschap: Creating challenge hash with username: oscarrdg(a)unav.es
(11) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00}
(11) mschap: --> --challenge=c159f634076ecce6
(11) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00}
(11) mschap: -->
--nt-response=d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8
(11) mschap: Program returned code (0) and output 'NT_KEY:
751E91FBC94E37990A2A5B973C29E4D3'
(11) mschap: Adding MS-CHAPv2 MPPE keys
(11) [mschap] = ok
(11) } # Auth-Type MS-CHAP = ok
(11) MSCHAP Success
(11) eap: Sending EAP Request (code 1) ID 13 length 51
(11) eap: EAP session adding &reply:State = 0x739669f1729b7348
(11) [eap] = handled
(11) } # authenticate = handled
(11) } # server inner-tunnel
(11) Virtual server sending reply
(11) User-Name = "oscarrdg(a)unav.es"
(11) Reply-Message += "role.n1"
(11) Aruba-User-Role := "role.n1"
(11) EAP-Message =
0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942
(11) Message-Authenticator = 0x00000000000000000000000000000000
(11) State = 0x739669f1729b7348a02455fb687f2caa
(11) eap_peap: Got tunneled reply code 11
(11) eap_peap: User-Name = "oscarrdg(a)unav.es"
(11) eap_peap: Reply-Message += "role.n1"
(11) eap_peap: Aruba-User-Role := "role.n1"
(11) eap_peap: EAP-Message =
0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942
(11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(11) eap_peap: State = 0x739669f1729b7348a02455fb687f2caa
(11) eap_peap: Got tunneled reply RADIUS code 11
(11) eap_peap: User-Name = "oscarrdg(a)unav.es"
(11) eap_peap: Reply-Message += "role.n1"
(11) eap_peap: Aruba-User-Role := "role.n1"
(11) eap_peap: EAP-Message =
0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942
(11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(11) eap_peap: State = 0x739669f1729b7348a02455fb687f2caa
(11) eap_peap: Got tunneled Access-Challenge
(11) eap: Sending EAP Request (code 1) ID 13 length 82
(11) eap: EAP session adding &reply:State = 0x4a7c50d94171497d
(11) [eap] = handled
(11) } # authenticate = handled
(11) Using Post-Auth-Type Challenge
(11) Post-Auth-Type sub-section not found. Ignoring.
(11) # Executing group from file
/usr/local/etc2/freeradius/etc/raddb/sites-enabled/default
(11) Sent Access-Challenge Id 240 from xxx:1812 to xxxxxx:45903 length 0
(11) EAP-Message =
0x010d0052190017030300476a2a84ab3ae80e65df331667562db833be49b2c3281f498c160a1da57850e4c4db22bfebfcec126265d589bbfe90d31b5ded9e845dd71e0e30a7911af58f1d022b04703a397886
(11) Message-Authenticator = 0x00000000000000000000000000000000
(11) State = 0x4a7c50d94171497df1395bb8ee5037b2
(11) Finished request
Waking up in 4.7 seconds.
*Oscar Remírez de Ganuza Satrústegui*
IT Services
Universidad de Navarra
Tel. +34 948425600 x803130
http://www.unav.edu/web/it/
4
9
We provide AAA services to a variety of client businesses across North
America, and we use FreeRADIUS as the final piece of our authentication
process. Because our clients' customers are unknown until they attempt
to connect to the network, all user radius credentials are created
dynamically, after an initial authentication via another method
(typically, credit card charges, access codes, etc.); once that initial
auth is complete, we create a credential using the user devices' MAC
address to ensure uniqueness, and to facilitate the MAC auth feature of
the gateway devices we employ, which permits immediate reconnection
following idle time-out without having to open a browser (a limitation
of the gateway devices).
Of concern to us is that we don't want a user to authenticate in one
place of business for which we provide service, then move to another
client site, at which MAC authentication is enabled, and have the device
automatically connected at the second location. This is mainly due to
differences in service offerings at different client sites.
What we're looking to do is create an additional table in the radius
database. That table would contain the following fields:
id primary table key
callingstationid self-explanatory
nasid identifies the specific site the user is at, and
corresponds to our own internal site id
nasportid the vlan the user is in
groupname the group to which the user is assigned in
radusergroup
As we create each user's credentials, we'll populate this new table with
the information indicated. For each VLAN the user connects to, there
would be a separate row so that, as he moves from vlan to vlan, we can
update the group assignment in radusergroup so that he'd get the proper
group attributes.
Does this sound like something that could work? If so, I need a bit of
help understanding where we'd put the table query (and the construction
of it) in whichever file it should be in (e.g.,
sites-enabled/default?). The goal is to perform the query, and if
there's a corresponding row match, do an update on the username in
radusergroup to set the proper group id, and then continue normal
processing; if there is no match, we'd simply reject the connection,
which would force the gateway to redirect to a captive portal server for
initial authentication, as described above).
For me, the sticking point is where and how to put the SQL query, so I'd
appreciate any pointers I can get. And, too, if there's a better way of
doing this, I'd welcome any advice!
I hope I've provided enough information to start. Many thanks in advance!
Jim
2
7
Hi
I have a RADIUS setup (eduroam) where the users are authenticated
against LDAP (mod_ldap, not ntlm_auth) for our own domain. All other
users are proxied to a RadSec proxy.
This works fine, but now we need the possibility to replace the
Aruba-User-VLAN VAP with a different VLAN ID, if some users from our
domain can be found in a special LDAP group (i.e. cn=testgroup). If not,
the users should get assigned the Aruba-User-VLAN VAP 31.
What do i have to change in my setup in order to make this work?
In my /etc/raddb/sites-enabled/testsite i have:
...
post-auth {
#reply_log
#redundant_ldap
#exec
Post-Auth-Type REJECT {
attr_filter.access_reject
}
### enable debug logging from here on
#update control {
# Tmp-String-0 = "%{debug:2}"
#}
if (Realm == "testdomain.de") {
update reply {
Aruba-User-Vlan = "31"
}
}
}
Best,
Thomas
...
--
Thomas Stather
IT Services
Tel: +49 6221-486 628
Fax: +49 6221-486 561
------------------------------------------------------------------------
Max Planck Institute for Medical Research (MPImF)
Jahnstrasse 29, 69120 Heidelberg
Germany
6
18
Hi,
I know this is not a problem with FreeRADIUS, however, there are several people on this list who run FreeRADIUS with Active Directory as a back end and I need their advice on this.
I've run into the dreaded "No logon servers (0xc000005e)" error with NTLM. In the past I've found that the computer password for the server expired on AD and that it was either fixed by rejoining, or by tweaking the password's expiry.
Do any AD folk on the list know what we can do to get this stable and that this does not occur again? Any ideas will be very useful.
:-)
With Regards
Stefan Paetow
Moonshot Industry & Research Liaison Coordinator
t: +44 (0)1235 822 125
Janet, the UK's research and education network.
Janet(UK) is a trading name of Jisc Collections and Janet Limited, a
not-for-profit company which is registered in England under No. 2881024
and whose Registered Office is at Lumen House, Library Avenue,
Harwell Oxford, Didcot, Oxfordshire. OX11 0SG. VAT No. 614944238
2
1
hints file based rewrite does not work (migration from freeradius 1.1.x to 3.0.x)
by Bernd 18 Feb '16
by Bernd 18 Feb '16
18 Feb '16
Hi list,
we're about to move from a freeradius (freeradius-1.1.3-1.6.el5 on
CentOS 5) to a HA freeradius (freeradius-3.0.4-6.el7.x86_64 on CentOS 7)
environment.
We're almost there, however, I ran into an issue: I have to rewrite an
"%" character to "@". My 'hints' file on the old installation did this
perfectly well:
DEFAULT User-Name =~ "bla\-bla\/([^%]+)%kroenchenstadt.de"
User-Name := "%{1}(a)kroenchenstadt.de"
However, freeradius BLA throws an error (running as 'radius -X' for
debugging purposes):
(0) ERROR: preprocess : bla\-bla\/(^%)%kroenchenstadt.de
(0) ERROR: preprocess : ^ Invalid variable expansion
Any idea what goes possibly wrong here? How could I circumvent the
problem?
Thanks,
Bernd
4
14
I've looked around online, but a lot of documentation is outdated and other
docs don't do a good job, so would someone provide a simple set of
instructions for getting EAP-SIM to work, including: which flags (if any)
freeradius-3.0.11 should be compiled with; what config files need to be
edited, why and how; what need to be done on the wireless device, if
anything; and how to test and basic gotchas that might be encountered.
Would be greatly appreciated and would eliminate a lot of the confusion
that arises when trying to find this information in scattered places online.
Thanks!
Michael Martinez
http://www.michael--martinez.com/computers/
--
---
4
11