November 2016 - Freeradius-Users - lists.freeradius.org

Apple .mobileconfig templates for user devices?
by Toby Walsh 14 Nov '16

14 Nov '16

Does anyone have or can anyone point me in the direction of some good templates for .mobileconfig templates for authenticating against Freeradius? While I've deployed my Freeradius server at home successfully I have a mix of Android, Linux, Windows and Apple clients to connect and I'm struggling with the last. Android was super easy. Linux also. Windows was weird (I had to set it to use Enterprise WPA2 as the security method, but then way deeper down configure 802.1x settings). Apple is a monumental PITA. You cannot set up 802.1x without importing a profile in .mobileconfig format. Apple server versions might have an easy way to create these from a GUI or else you have to create an XML file from scratch (or hope that free web configs are good enough). I don't have Apple server so it's XML editing for me. I've got the full format specification here: https://developer.apple.com/library/content/featuredarticles/iPhoneConfigur… despite it targeting iPhones (this will be for Macbook Airs). Reading that full document makes my head hurt and I'm sure I'd screw up part of the profile anyway and then be hunting ghosts trying to get it correct. So does anyone have a working template they'd be willing to share, after redacting the secret information of course? Not that it's really important (I can modify something if I know it just about fits my config), but I'm using EAP-PEAP-mschapv2. Thanks, Toby

4 5

3.0.4 - send an access-reject when a proxied access-request times out
by Stuart Anderson 14 Nov '16

14 Nov '16

Hi all, I'm trying to get our FreeRADIUS 3.0.4 RADIUS proxy server (on CentOS 7) to send an access-reject when an access-request it has proxied to a home server ("dev-rad-app-01" in the output below) times out. I've tried adding no_response_fail = yes to the home server configuration as per the comments in proxy.conf, but traffic captures confirm that no access-reject is being sent. Also, the "no_response_fail" line does not appear in the home_server dev-rad-app-01 section of the radiusd -X output. I note that it is stated in proxy.conf regarding no_response_fail that "This configuration WILL be removed in a future release", so I'd be grateful if it could be confirmed whether or not this option should still work in 3.0.4. If it should, can anyone give me guidance as to what I'm missing to get it to work? If the option has indeed been removed, is there another way to achieve the required behaviour? Background: The FreeRADIUS proxy sits in front of a Microsoft NPS authentication server, which as most are no doubt aware has a tendency to discard access-requests it doesn't like, rather than rejecting them. This is leading to the FreeRADIUS proxy being repeatedly marked as down by upstream proxies. radiusd -X output: radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/eduroam including configuration file /etc/raddb/sql.conf main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 0 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server eduroam0 { ipaddr = roaming0.ja.net IPv4 address [194.82.174.185] port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server eduroam1 { ipaddr = roaming1.ja.net IPv4 address [194.83.56.233] port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server eduroam2 { ipaddr = roaming2.ja.net IPv4 address [194.83.56.249] port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server dev-rad-app-01 { ipaddr = 10.17.192.37 port = 1812 type = "auth" secret = <<< secret >>> response_window = 8.000000 response_timeouts = 5 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool qmul { type = client-port-balance home_server = dev-rad-app-01 } realm qmul.ac.uk { auth_pool = qmul nostrip } home_server_pool eduroam { type = client-port-balance home_server = eduroam0 home_server = eduroam1 home_server = eduroam2 } realm ~[-a-zA-Z0-9]+(\.[-a-z-A-Z0-9]+)+$ { auth_pool = eduroam nostrip } radiusd: #### Loading Clients #### client roaming0.ja.net { ipaddr = 194.82.174.185 require_message_authenticator = no secret = <<< secret >>> shortname = "roaming0.ja.net" nas_type = "other" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client roaming1.ja.net { ipaddr = 194.83.56.233 require_message_authenticator = no secret = <<< secret >>> shortname = "roaming1.ja.net" nas_type = "other" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client roaming2.ja.net { ipaddr = 194.83.56.249 require_message_authenticator = no secret = <<< secret >>> shortname = "roaming2.ja.net" nas_type = "other" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client dev-rad-prx-01 { ipaddr = 161.23.64.154 require_message_authenticator = no secret = <<< secret >>> shortname = "dev-rad-prx-01" nas_type = "other" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client MEDC1WLC02-PAIR2-SEC { ipaddr = 161.23.2.37 require_message_authenticator = no secret = <<< secret >>> shortname = "MEDC1WLC02-PAIR2-SEC" nas_type = "cisco" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" } post-auth { reference = ".query" } mysql { tls { } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_sql (sql): Opening additional connection (0) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (1) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (2) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (3) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (4) rlm_sql_mysql: Starting connect to MySQL server } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server eduroam { # from file /etc/raddb/sites-enabled/eduroam # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server eduroam radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on auth address * port 1812 as server eduroam Listening on acct address * port 1813 as server eduroam Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 53026 Ready to process requests Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '10-0b-a9-84-26-88' Called-Station-Id = 'TBtest-02-WAP01:edutest' NAS-Port = 4 Cisco-AVPair = 'audit-session-id=250217a1000001f7c29e2458' Acct-Session-Id = '58249ec2/10:0b:a9:84:26:88/487' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '1322' EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Message-Authenticator = 0x4347054f4269904bef60fbdca5de14a1 (0) Received Access-Request packet from host 161.23.2.37 port 32769, id=80, length=297 (0) User-Name = 'xyz321(a)qmul.ac.uk' (0) Chargeable-User-Identity = 0x00 (0) Location-Capable = Civix-Location (0) Calling-Station-Id = '10-0b-a9-84-26-88' (0) Called-Station-Id = 'TBtest-02-WAP01:edutest' (0) NAS-Port = 4 (0) Cisco-AVPair = 'audit-session-id=250217a1000001f7c29e2458' (0) Acct-Session-Id = '58249ec2/10:0b:a9:84:26:88/487' (0) NAS-IP-Address = 161.23.2.37 (0) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (0) Airespace-Wlan-Id = 6 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = '1322' (0) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (0) Message-Authenticator = 0x4347054f4269904bef60fbdca5de14a1 (0) # Executing section authorize from file /etc/raddb/sites-enabled/eduroam (0) authorize { (0) auth_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log : --> /var/log/radius/radacct/161.23.2.37/auth-detail-20161110 (0) auth_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/161.23.2.37/auth-detail-20161110 (0) auth_log : EXPAND %t (0) auth_log : --> Thu Nov 10 16:22:26 2016 (0) [auth_log] = ok (0) suffix : Checking for suffix after "@" (0) suffix : Looking up realm "qmul.ac.uk" for User-Name = "xyz321(a)qmul.ac.uk" (0) suffix : Found realm "qmul.ac.uk" (0) suffix : Adding Realm = "qmul.ac.uk" (0) suffix : Proxying request from user xyz321(a)qmul.ac.uk to realm qmul.ac.uk (0) suffix : Preparing to proxy authentication request to realm "qmul.ac.uk" (0) [suffix] = updated (0) } # authorize = updated (0) # Executing section pre-proxy from file /etc/raddb/sites-enabled/eduroam (0) pre-proxy { (0) pre_proxy_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d (0) pre_proxy_log : --> /var/log/radius/radacct/161.23.2.37/pre-proxy-detail-20161110 (0) pre_proxy_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d expands to /var/log/radius/radacct/161.23.2.37/pre-proxy-detail-20161110 (0) pre_proxy_log : EXPAND %t (0) pre_proxy_log : --> Thu Nov 10 16:22:26 2016 (0) [pre_proxy_log] = ok (0) operator-name.pre-proxy operator-name.pre-proxy { (0) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") (0) EXPAND %{request:Packet-Type} (0) --> Access-Request (0) EXPAND %{client:Operator-Name} (0) --> 1qmul.ac.uk (0) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") -> TRUE (0) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") { (0) update proxy-request { (0) EXPAND %{client:Operator-Name} (0) --> 1qmul.ac.uk (0) Operator-Name := "1qmul.ac.uk" (0) } # update proxy-request = noop (0) } # if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") = noop (0) } # operator-name.pre-proxy operator-name.pre-proxy = noop (0) if ("%{Packet-Type}" != "Accounting-Request") (0) EXPAND %{Packet-Type} (0) --> Access-Request (0) if ("%{Packet-Type}" != "Accounting-Request") -> TRUE (0) if ("%{Packet-Type}" != "Accounting-Request") { (0) attr_filter.pre-proxy : EXPAND %{Realm} (0) attr_filter.pre-proxy : --> qmul.ac.uk (0) attr_filter.pre-proxy : Matched entry DEFAULT at line 22 (0) [attr_filter.pre-proxy] = updated (0) } # if ("%{Packet-Type}" != "Accounting-Request") = updated (0) } # pre-proxy = updated Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 41404 (0) Proxying request to home server 10.17.192.37 port 1812 timeout 8.000000 (0) Sending Access-Request packet to host 10.17.192.37 port 1812, id=36, length=0 (0) User-Name = 'xyz321(a)qmul.ac.uk' (0) Chargeable-User-Identity = 0x00 (0) Calling-Station-Id = '10-0b-a9-84-26-88' (0) NAS-IP-Address = 161.23.2.37 (0) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (0) Framed-MTU = 1300 (0) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (0) Proxy-State = 0x3830 Sending Access-Request Id 36 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 0.3 seconds. Waking up in 0.1 seconds. (0) Expecting proxy response no later than 7.499768 seconds from now Waking up in 7.4 seconds. Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 (0) Sending duplicate proxied request to home server 10.17.192.37 port 1812 - ID: 36 (0) Sending Access-Request packet to host 10.17.192.37 port 1812, id=36, length=123 (0) User-Name = 'xyz321(a)qmul.ac.uk' (0) Chargeable-User-Identity = 0x00 (0) Calling-Station-Id = '10-0b-a9-84-26-88' (0) NAS-IP-Address = 161.23.2.37 (0) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (0) Framed-MTU = 1300 (0) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (0) Proxy-State = 0x3830 Sending Access-Request Id 36 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 5.8 seconds. Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 (0) Sending duplicate proxied request to home server 10.17.192.37 port 1812 - ID: 36 (0) Sending Access-Request packet to host 10.17.192.37 port 1812, id=36, length=123 (0) User-Name = 'xyz321(a)qmul.ac.uk' (0) Chargeable-User-Identity = 0x00 (0) Calling-Station-Id = '10-0b-a9-84-26-88' (0) NAS-IP-Address = 161.23.2.37 (0) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (0) Framed-MTU = 1300 (0) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (0) Proxy-State = 0x3830 Sending Access-Request Id 36 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 3.7 seconds. Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 (0) Sending duplicate proxied request to home server 10.17.192.37 port 1812 - ID: 36 (0) Sending Access-Request packet to host 10.17.192.37 port 1812, id=36, length=123 (0) User-Name = 'xyz321(a)qmul.ac.uk' (0) Chargeable-User-Identity = 0x00 (0) Calling-Station-Id = '10-0b-a9-84-26-88' (0) NAS-IP-Address = 161.23.2.37 (0) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (0) Framed-MTU = 1300 (0) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (0) Proxy-State = 0x3830 Sending Access-Request Id 36 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 1.6 seconds. (0) No proxy response, giving up on request and marking it done (0) ERROR: Failing proxied request, due to lack of any response from home server 10.17.192.37 port 1812 Waking up in 4.9 seconds. Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 (0) Cleaning up request packet ID 80 with timestamp +448 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '10-0b-a9-84-26-88' Called-Station-Id = 'TBtest-02-WAP01:edutest' NAS-Port = 4 Cisco-AVPair = 'audit-session-id=250217a1000001f7c29e2458' Acct-Session-Id = '58249ec2/10:0b:a9:84:26:88/487' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '1322' EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Message-Authenticator = 0x4347054f4269904bef60fbdca5de14a1 (1) Received Access-Request packet from host 161.23.2.37 port 32769, id=80, length=297 (1) User-Name = 'xyz321(a)qmul.ac.uk' (1) Chargeable-User-Identity = 0x00 (1) Location-Capable = Civix-Location (1) Calling-Station-Id = '10-0b-a9-84-26-88' (1) Called-Station-Id = 'TBtest-02-WAP01:edutest' (1) NAS-Port = 4 (1) Cisco-AVPair = 'audit-session-id=250217a1000001f7c29e2458' (1) Acct-Session-Id = '58249ec2/10:0b:a9:84:26:88/487' (1) NAS-IP-Address = 161.23.2.37 (1) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (1) Airespace-Wlan-Id = 6 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = '1322' (1) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (1) Message-Authenticator = 0x4347054f4269904bef60fbdca5de14a1 (1) # Executing section authorize from file /etc/raddb/sites-enabled/eduroam (1) authorize { (1) auth_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log : --> /var/log/radius/radacct/161.23.2.37/auth-detail-20161110 (1) auth_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/161.23.2.37/auth-detail-20161110 (1) auth_log : EXPAND %t (1) auth_log : --> Thu Nov 10 16:22:35 2016 (1) [auth_log] = ok (1) suffix : Checking for suffix after "@" (1) suffix : Looking up realm "qmul.ac.uk" for User-Name = "xyz321(a)qmul.ac.uk" (1) suffix : Found realm "qmul.ac.uk" (1) suffix : Adding Realm = "qmul.ac.uk" (1) suffix : Proxying request from user xyz321(a)qmul.ac.uk to realm qmul.ac.uk (1) suffix : Preparing to proxy authentication request to realm "qmul.ac.uk" (1) [suffix] = updated (1) } # authorize = updated (1) # Executing section pre-proxy from file /etc/raddb/sites-enabled/eduroam (1) pre-proxy { (1) pre_proxy_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d (1) pre_proxy_log : --> /var/log/radius/radacct/161.23.2.37/pre-proxy-detail-20161110 (1) pre_proxy_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d expands to /var/log/radius/radacct/161.23.2.37/pre-proxy-detail-20161110 (1) pre_proxy_log : EXPAND %t (1) pre_proxy_log : --> Thu Nov 10 16:22:35 2016 (1) [pre_proxy_log] = ok (1) operator-name.pre-proxy operator-name.pre-proxy { (1) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") (1) EXPAND %{request:Packet-Type} (1) --> Access-Request (1) EXPAND %{client:Operator-Name} (1) --> 1qmul.ac.uk (1) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") -> TRUE (1) if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") { (1) update proxy-request { (1) EXPAND %{client:Operator-Name} (1) --> 1qmul.ac.uk (1) Operator-Name := "1qmul.ac.uk" (1) } # update proxy-request = noop (1) } # if (("%{request:Packet-Type}" == 'Access-Request') && "%{client:Operator-Name}") = noop (1) } # operator-name.pre-proxy operator-name.pre-proxy = noop (1) if ("%{Packet-Type}" != "Accounting-Request") (1) EXPAND %{Packet-Type} (1) --> Access-Request (1) if ("%{Packet-Type}" != "Accounting-Request") -> TRUE (1) if ("%{Packet-Type}" != "Accounting-Request") { (1) attr_filter.pre-proxy : EXPAND %{Realm} (1) attr_filter.pre-proxy : --> qmul.ac.uk (1) attr_filter.pre-proxy : Matched entry DEFAULT at line 22 (1) [attr_filter.pre-proxy] = updated (1) } # if ("%{Packet-Type}" != "Accounting-Request") = updated (1) } # pre-proxy = updated (1) Proxying request to home server 10.17.192.37 port 1812 timeout 8.000000 (1) Sending Access-Request packet to host 10.17.192.37 port 1812, id=29, length=0 (1) User-Name = 'xyz321(a)qmul.ac.uk' (1) Chargeable-User-Identity = 0x00 (1) Calling-Station-Id = '10-0b-a9-84-26-88' (1) NAS-IP-Address = 161.23.2.37 (1) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (1) Framed-MTU = 1300 (1) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (1) Proxy-State = 0x3830 Sending Access-Request Id 29 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 0.3 seconds. Waking up in 0.1 seconds. (1) Expecting proxy response no later than 7.497174 seconds from now Waking up in 7.4 seconds. Received Access-Request Id 80 from 161.23.2.37:32769 to 161.23.64.189:1812 length 297 (1) Sending duplicate proxied request to home server 10.17.192.37 port 1812 - ID: 29 (1) Sending Access-Request packet to host 10.17.192.37 port 1812, id=29, length=123 (1) User-Name = 'xyz321(a)qmul.ac.uk' (1) Chargeable-User-Identity = 0x00 (1) Calling-Station-Id = '10-0b-a9-84-26-88' (1) NAS-IP-Address = 161.23.2.37 (1) NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' (1) Framed-MTU = 1300 (1) EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b (1) Proxy-State = 0x3830 Sending Access-Request Id 29 from 0.0.0.0:41404 to 10.17.192.37:1812 User-Name = 'xyz321(a)qmul.ac.uk' Chargeable-User-Identity = 0x00 Calling-Station-Id = '10-0b-a9-84-26-88' NAS-IP-Address = 161.23.2.37 NAS-Identifier = 'MEDC1WLC02-PAIR2-SEC' Framed-MTU = 1300 EAP-Message = 0x020300160178797a33323140716d756c2e61632e756b Proxy-State = 0x3830 Waking up in 5.9 seconds. (1) No proxy response, giving up on request and marking it done (1) ERROR: Failing proxied request, due to lack of any response from home server 10.17.192.37 port 1812 Waking up in 4.9 seconds. (1) Cleaning up request packet ID 80 with timestamp +457 Ready to process requests Thanks in advance for any advice. Stuart

4 6

Re: Ubiquiti AP Working with FreeRadius (Jose Quezada)
by Jose Quezada 14 Nov '16

14 Nov '16

> As with all of these questions, read the vendor documentation. If that says you can restrict bandwidth via RADIUS attributes, it will tell you which RADIUS attributes to use. If it doesn't say you can restrict bandwidth via RADIUS attributes, then you can't do it. > The server ships with all dictionaries we know about. There is no magic set of hidden dictionaries that you have to ask for. Hello Sr Alan DeKok, I think so, I only ask why I read in a FreeRADIUS guide for beginner that there might be some cases that some NAS do not have VSAs but that these can be created internally in FreeRADIUS and together with unlang make them work. For that reason I want to know if there was a way to do it Thank in advance.... Jose Quezada

2 1

v3.0.10: how to specify allowed SSID list in users file?
by "František Hanzlík" 14 Nov '16

14 Nov '16

I want authenticate WiFi users on freeradius-3.0.10. AP provides several SSIDs and I want certain users to be able connect just to certain SSIDs. Users are few, and I want for AAA use files module. My idea is use notation something like this (in users file mods-config/files/authorize): tom Cleartext-Password := "to", Wifi-Allowed = "SSID1,SSID2" pepa Cleartext-Password := "pp", Wifi-Allowed = "SSID1" petr Cleartext-Password := "pe", Wifi-Allowed = "SSID3" and then test it in default server "authorize" section somewhere after "files" module specification with unlang code something as: switch &Called-Station-SSID { case "SSID1" { if (&control:Wifi-Allowed =~ /.*SSID1.*/ ) { ok } else { reject } } case "SSID2" { if (&control:Wifi-Allowed =~ /.*SSID2.*/ ) { ok } else { reject } } } Called-Station-SSID I've filled by calling rewrite_called_station_id at beginnig of the "authorize" section (just after "filter_username"), this part seems be fine. Unfortunately, all my attempts ends unsuccessfully, mostly with syntax error in 'users' file, or at run at 'if (&control:Wifi-Allowed ...' with error "ERROR: Failed retrieving values required to evaluate condition ". Attribute "Wifi-Allowed" i tried declare in %{raddb}/dictionary or %{raddb}/dictionary.local, both without success. Is it even possible to carry out this way? What should be the correct procedure? I also tried another way, where I had additional file in form: SSID1:user1,user3,user4 SSID2:user1 SSID3:user2 and parse it with slightly modified etc_group module and then check with similar unlang code as above - and it work fine; but as a disadvantage there must be two configuraton files. I would have been happier if it was possible to have a user, its password (or certificate - it's also possible?), and him allowed SSID in one (perhaps "users") file. TIA, Franta

3 2

Freeradius and Unifi Vlan
by Gabriel Ozaki 14 Nov '16

14 Nov '16

Hi Im trying to use freeradius to assign the VLAN of a connection using the unifi AP, like in this page: https://help.ubnt.com/hc/en-us/articles/219654087-UniFi-Using-VLANs-with-Un… My server is a Debian jessie fresh install with Freeradius 3.0.12(compiled from source, using defaults) and unifi controler 5.3.5(beta version, but i see some guys using radius+vlan using a cisco solution) My AP is a UniFi AP-AC-Lite firmware 3.7.24.5422 My users file(the default file and i add in the end): kemi Cleartext-Password := "1q2w3e4r" Tunnel-Type = VLAN, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id = 3 My clients.conf client private-network-1 { ipaddr = 192.168.3.0/24 secret = testing123 } In radiusd.conf i only change line 510: allow_vulnerable_openssl = 'CVE-2016-6304' The radiusd -X when i use radtest(i attatch the full log) (0) Login OK: [kemi/1q2w3e4r] (from client private-network-1 port 0) (0) Sent Access-Accept Id 130 from 192.168.3.1:1812 to 192.168.3.1:56590 length 0 (0) Tunnel-Type = VLAN (0) Tunnel-Medium-Type = IEEE-802 (0) Tunnel-Private-Group-Id = "3" (0) Finished request The radiusd -X when i use the AP: (9) post-auth { ... } # empty sub-section is ignored (9) Login OK: [kemi/<via Auth-Type = eap>] (from client private-network-1 port 0 via TLS tunnel) (9) } # server inner-tunnel (9) Virtual server sending reply (9) Tunnel-Type = VLAN (9) Tunnel-Medium-Type = IEEE-802 (9) Tunnel-Private-Group-Id = "3" (9) MS-MPPE-Encryption-Policy = Encryption-Required (9) MS-MPPE-Encryption-Types = 4 (9) MS-MPPE-Send-Key = 0x5cbfff77aff0148b908c8cec2efaae2c (9) MS-MPPE-Recv-Key = 0xd4ad8206c448c3530a1e547ee91f173c (9) EAP-Message = 0x03030004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "kemi" (9) eap_ttls: Got tunneled Access-Accept (9) eap_ttls: No information to cache: session caching will be disabled for session 4487edec31086c9129e937fada901fbda23ba4600dd0d7e67f0c5e1a843ba264 (9) eap: Sending EAP Success (code 3) ID 58 length 4 But unifi still using vlan 1, is possible the unifi is not receiving the Tunnel information? Thanks

5 13

Freeradius DHCP - strange behavior
by kjonca＠o2.pl 14 Nov '16

14 Nov '16

I try to migrate from isc-dhcp and I have strange behaviour: --8<---------------cut here---------------start------------->8--- Debug: Server core libs: Debug: freeradius-server : 3.0.12 Debug: talloc : 2.0.* Debug: ssl : 1.1.0c release Debug: pcre : 8.39 2016-06-14 --8<---------------cut here---------------end--------------->8--- (packaged by dabian) /etc/freeradius/3.0/sites-available/dhcp (excerpt) --8<---------------cut here---------------start------------->8--- listen { type = dhcp ipaddr = 0.0.0.0 src_ipaddr = 192.168.200.200 port = 6700 interface = lan broadcast = yes } --8<---------------cut here---------------end--------------->8--- with this configuration --8<---------------cut here---------------start------------->8--- sudo /sbin/dhclient -p 6701 -d -v wlan0 --8<---------------cut here---------------end--------------->8--- works as expected. but when I try to change port to 67 it stop respond to broadcast queries :( ie. --8<---------------cut here---------------start------------->8--- sudo /sbin/dhclient -d -s 192.168.200.200 -v wlan0 --8<---------------cut here---------------end--------------->8--- works, while: --8<---------------cut here---------------start------------->8--- sudo /sbin/dhclient -d -v wlan0 --8<---------------cut here---------------end--------------->8--- not. dhclient and freeradius were run on different boxes with router between them. i tried with different "ipaddr" option (0.0.0.0 , 255.255.255.255 , 192.168.200.200) but without success. I realize, that it is not neccessarily freeradius fault, but I have no idea what should I check. KJ -- http://wolnelektury.pl/wesprzyj/teraz/ To find a friend one must close one eye; to keep him -- two. -- Norman Douglas

3 4

Re: Ubiquiti AP Working with FreeRadius (David Teston)
by Jose Quezada 14 Nov '16

14 Nov '16

>Hello, >I am currently using Ubiquiti Unifi APs, but I don't use a Ubiquiti dictionary. You can restrict bandwidth using the Ubiquiti Cloud Controller. You can run the Controller on the same server as FreeRadius (which is what I do), or you can run it on any desktop OS. The Controller doesn't always have to be running, but it's much easier to use/debug when it's on a server. >I highly suggest using the Controller because the interface is comprehensive and intuitive. Please feel free to ask me any questions about my setup. If people want the full configuration posted, I'll be glad to do that too. >David Thanks a lot Sr David And if it is the case that I have to limit users by sessions and by bandwidth depending on who the user is. Could cloud controller help me with that? I think not. For that reason i want to know if I'd do with some moduls or something like that in radius. Although I have to create them. Thanks David, Jose Quezada

1 0

password-less keys for TLS
by Matt Zagrabelny 11 Nov '16

11 Nov '16

Hello, I am wondering what folks think about password-less keys for TLS? Both the server key - and the client key under EAP-TLS. The password for the server key is on disk in a config file, so a password encrypted key seems just about as safe as a password-less key. The client keys are bit more vulnerable when they aren't encrypted, but I thought I would ask the list if anyone is rolling client certs without passwords. Thanks for any feedback! -m

2 1

Matching a prefix in huntgroups file
by Brian Candler 11 Nov '16

11 Nov '16

What is the way to match a range of IPs in the preprocess huntgroups file? This is with freeradius 3.0.12. Unfortunately, the sample huntgroups file doesn't show any example of matching a range. Here's what I've tried: network NAS-IP-Address =~ ^10\.254\. network NAS-IP-Address =~ "^10\.254\." network NAS-IP-Address =~ "10\.254\..*" network NAS-IP-Address =~ /^10\.254\./ Those all don't match: (0) if (&Huntgroup-Name == "network") { (0) ERROR: Failed retrieving values required to evaluate condition network NAS-IP-Address == 10.254.0.0/16 gives a parse error: /etc/raddb/mods-config/preprocess/huntgroups[5]: Parse error (check) for entry network: Invalid IPv4 mask length "/16". Only "/32" permitted for non-prefix types network 10.254.0.0/16 == NAS-IP-Address gives a different parse error: /etc/raddb/mods-config/preprocess/huntgroups[5]: Parse error (check) for entry network: Invalid vendor name in attribute name "10.254.0.0/16" I know *something* is happening with the regexps, because I can get a compilation error if I make it invalid: network NAS-IP-Address =~ ^10\.254\ /etc/raddb/mods-config/preprocess/huntgroups[5]: Parse error (check) for entry network: Error at offset 9 compiling regex for NAS-IP-Address: Pattern compilation failed: \ at end of pattern But it won't match the supplied NAS-IP-Address. I have no problem with a simple == condition matching a single IP address though. Any clues? Thanks, Brian.

7 30

radacct table not working corectly
by Zubair Ayub 11 Nov '16

11 Nov '16

my radacct table not working properly its not getting total online users some users are missing in radacct but they are online. thanks in advance regard zubair ayub

2 3