April 2016 - Freeradius-Users - lists.freeradius.org

3.0.4: binary LDAP attributes
by Nikolai Kondrashov 24 Mar '17

24 Mar '17

Hi everyone, Our (Red Hat) QA was testing the effect of this entry in 3.0.4 ChangeLog: * Modify pairparsevalue to deal with embedded NULLs better, and use the binary versions of attribute values in rlm_ldap. They have noticed that binary LDAP values get truncated on embedded zero characters (\0) in RADIUS replies, in radiusReplyMessage in particular. I.e. for radiusReplyMessage:: cmVwbHkgd2l0aCBhAGI= The response output by radtest was Reply-Message = 'reply with a' The network capture also showed that RADIUS reply packets contained truncated values. Is this intended, or was there a fix for this? In related discoveries, it seems that backslashes get removed from LDAP attribute values in RADIUS replies, so radiusReplyMessage: reply with a\0b becomes Reply-Message = 'reply with a0b' in radtest output. Is this intended? Thank you. Nick

4 12

user-group for rejected users
by Fabricio Viana 21 Mar '17

21 Mar '17

Hello! Let´s suppose the following situations: 1) User exists but the password is wrong 2) User does not exist In both cases the answer is REJECT. It happens that certain hardware is making endless attempts that eventually saturating the server. - It is possible to cause the server, instead of rejecting the users, accept the login but responds ACCEPT with "framed-pool = pool-block" ? or/and - Is there any way to put REJECT users in a given group by default? Thanks! Fabricio

3 3

freeradius2 + iODBC + Informix
by vanish 28 Nov '16

28 Nov '16

Hello, Please help me set up freeradius2 + iODBC + Informix (I'm newbie in freeradius). - I have a test-machine with Ubuntu 14.04 and Freeradius-server v2.1.12. - I have a server with Informix Database Server v 10.00 Step 1: - I installed unixODBC on test-machine - I installed informix-csdk for connect to Informix Database Server (Driver) - I configured files /etc/odbc.ini and /etc/odbcinst.ini to connect to Informix Database Server - Checking with isql: +++++++++++++++++++++++++++++++++++++++++ root@test:/home/test# isql -v work +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> select 1 from TABLES(SET{1}) 1 +++++++++++++++++++++++++++++++++++++++++ - Everything is allright. Step 2: - I try to install freeradius-iodbc module to connect to Informix Database Server - During install I get next warning: +++++++++++++++++++++++++++++++++++++++++++++ The following packages will be REMOVED: unixodbc unixodbc-dev The following NEW packages will be installed: libiodbc2-dev +++++++++++++++++++++++++++++++++++++++++++++ - so unixodbc and unixodbc-dev packages was removed after install freeradius-iodbc - I included in radiusd.conf: +++++++++++++++++++++++++++++++++++++++++++++ sql { # # Set the database to one of: # # mysql, mssql, oracle, postgresql # database = "iodbc" # # Which FreeRADIUS driver to use. # driver = "rlm_sql_${database}" # Connection info: server = "test.server.ru" port = 1425 login = "test" password = "test123" radius_db = "test" ... +++++++++++++++++++++++++++++++++++++++++++++ - freeradius -XXX showed me next error: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ... Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Driver rlm_sql_iodbc (module rlm_sql_iodbc) loaded and linked Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to connect to test@test.server.ru:1425/test Fri Nov 21 14:53:48 2014 : Debug: rlm_sql (sql): starting 0 Fri Nov 21 14:53:48 2014 : Info: rlm_sql (sql): Attempting to connect rlm_sql_iodbc #0 Fri Nov 21 14:53:48 2014 : Error: sql_create_socket: SQLConnectfailed: [iODBC][Driver Manager]Data source name not found and no default driver specified. Driver could not be loaded Fri Nov 21 14:53:48 2014 : Error: rlm_sql (sql): Failed to connect DB handle #0 ... +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - Error - "SQLConnectfailed: [iODBC][Driver Manager]Data source name not found and no default driver specified. Driver could not be loaded." - Where did I go wrong? - I found some information in net with same problem, but clear decision nowhere not found.

4 4

RadPerf running in another server.
by Jim 19 Aug '16

19 Aug '16

Hello, I'm currently running FreeRADIUS 3.0.4 on a CentOS server and I wanted to use RadPerf for testing. Since I cannot install RadPerf in CentOS, I installed RadPerf in a separate Ubuntu 14.04 server, my question is: which is better for RadPerf installation? on the same server where FreeRADIUS was installed or different server?

4 4

authentication-failed
by Ejaz 04 Aug '16

04 Aug '16

Hello all. 1. NAS (MDG from Motorola, do we need add addionational attributes in dictionary file for the Motorola MDG) 2. Freeradius version 3.x, oracle 11g client (installed or Dell PowerEdge R730 or oracle 11x86) 3. Database (installed or Sparc remote server) 4. Driver rlm_sql is already installed . <mailto:root@ruh02saaa02:/usr/local/freeradius3/lib> root@ruh02saaa02:/usr/local/freeradius3/lib# ls -l rlm_sql_oracle* -rwxr-xr-x 1 root root 964808 Apr 14 14:35 rlm_sql_oracle.a -rwxr-xr-x 1 root root 27 Apr 14 14:35 <http://rlm_sql_oracle.la/> rlm_sql_oracle.la -rwxr-xr-x 1 root root 775232 Apr 14 14:35 rlm_sql_oracle.so The Radius server is able to connect to the database as below but the authentication is failed. as i am very new to freeradius any help would be highly appreciated.. } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 59512 Listening on proxy address :: port 52582 Ready to process requests (0) Received Access-Request Id 0 from <http://10.99.10.135:54942/> 10.99.10.135:54942 to <http://0.0.0.0:1812/> 0.0.0.0:1812 length 52 (0) User-Name = "10.10.82.80 " (0) User-Password = "cisco" (0) # Executing section authorize from file /usr/local/freeradius3/etc/raddb/sit es-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> TRUE (0) if (&User-Name =~ / /) { (0) update request { (0) &Module-Failure-Message += 'Rejected: User-Name contains whitesp ace' (0) } # update request = noop (0) [reject] = reject (0) } # if (&User-Name =~ / /) = reject (0) } # if (&User-Name) = reject (0) } # policy filter_username = reject (0) } # authorize = reject (0) Using Post-Auth-Type Reject (0) # Executing group from file /usr/local/freeradius3/etc/raddb/sites-enabled/d efault (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 104 second s rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 104 second s rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 104 second s rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 104 second s rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 104 second s rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (5), 1 of 32 pending slots used rlm_sql (sql): Reserved connection (5) (0) sql: EXPAND %{User-Name} (0) sql: --> 10.10.82.80 (0) sql: SQL-User-Name set to '10.10.82.80 ' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet- Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '10.10.82.80 ', 'cisco', 'Access-Reject', '2016-04-14 16:32:58') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authda te) VALUES ( '10.10.82.80 ', 'cisco', 'Access-Reject', '2016-04-14 16:32:58') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (5) rlm_sql (sql): Need 2 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 31 pending slots used (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> 10.10.82.80 (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 0 from <http://0.0.0.0:1812/> 0.0.0.0:1812 to <http://10.99.10.135:54942/> 10.99.10.135:54942 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +104 Ready to process requests Thanks, Mohammed Ejaz Asst. Operation Director of Systems. Cyberia SAUDI ARABIA P.O.Box: 301079, Riyadh 11372 Phone: (+966) 11 464 7114 Ext. 140 Mobile: (+966) 562311787 Fax: (+966) 11 465 4735 Website: http://www.cyberia.net.sa

3 5

using SSL certs with EAP-TLS
by Wouter 05 Jul '16

05 Jul '16

Goodday, In my FreeRadius setup for authenticating WiFi devices with EAP-TLS, I use server- and client SSL certificates from CA provider ' X '. I understand that now everyone with knowledge of this fact, can get a client SSL cert (PKCS#12) from this CA provider X and can authenticate with my WPA2 Enterprise network. After reading the following from the README: "In general, you should use self-signed certificates for 802.1x (EAP) authentication. When you list root CAs from other organisations in the "ca_file", you permit them to masquerade as you, to authenticate your users, and to issue client certificates for EAP-TLS." I would like to ask the following question. Is there something I can configure on the server side that only certain CommonName's and/or serial's can be used to authenticate correctly? Next to this question, I wonder why also a username (Benutzername) is asked in iOS when we use EAP-TLS with a certificate? I can fill out this field with whatever string and it authenticates in FreeRadius (when a correct cert is presented of course). screenshot: https://hilfe.uni-paderborn.de/images/thumb/4/4f/Eduroam_iOS7_04.png/250px-… I run version 3.0.11 on Ubuntu 14.04 LTS 64bit. Thank you

4 10

freeRadius instance without Authentication for Accounting
by liran kessel 10 May '16

10 May '16

Hi, I am interested in setting up an instance of freeRadius that will receive cloned data from a Radius Server in a telco operator environment. The purpose of the server is for us to be able to collect usage data and load it into our Datastore for analysis and BI. can anyone assist me in how I would set up the server once installed to prevent the server from performing authentication ,and accepting all messages. In addition we need to load the usage data info received initially into csv files that can then be loaded in to both a relational database (Oracle) and a NoSql (MongoDB) environment? Lastly is there a way to configure filtering of what messages are saved and logged? filtering would be needed to be performed by certain fields in the message , Thanks in advance to everyones time and help. Liran Kessel

3 9

unlang to customize error message
by Stefano Zanmarchi 05 May '16

05 May '16

According to MS-CHAP-V2 standard in case of authentication failure the Failure Packet should contain the following text in the Message field: "E=691 R=... ..." . Freeradius does send "E=691" if send_error is set to yes in mods-enabled/eap, but this may cause (as stated in the comments) some clients not to work. This is sadly the case with iOS 9.3.1 supplicants. Luckily we have a table relating MACs and OSs of the devices of our users. Is it possible via unlang to have Freeradius conditionally send "E=691" (in case authentication failure) based on a sql query? I believe this is quite tricky, but it'd really help us a lot. Thank you, Stefano

3 4

freeradius 2 certificate compatibility issue with ubuntu 14.04
by Dustin S 30 Apr '16

30 Apr '16

radtest bobsql h3llo 192.168.0.166 100 t3sting123 and radtest -t mschap bobsql h3llo 192.168.0.166 100 t3sting123both work fine from my ubuntu desktop and radtest -t mschap bobsql h3llo 127.0.0.1:18120 0 t3sting123 works fine from the server (notes in file "inner-tunnel" say that this should mean that peap will work). However, radtest -t eap-md5 bobsql h3llo 192.168.0.166 100 t3sting123does not work from my ubuntu desktop or the ubuntu server in which freeradius is running (used same command string except with 127.0.0.1 as IP address) "freeradius -X" output says to look at http://wiki.freeradius.org/guide/Certificate-Compatibility which describes the symptoms of my issue but only shows suggestions for what to do if your client is a Windows machine. Unfortunately, I haven't messed with secure certificates explicitly so don't know how to troubleshoot them. Strangely enough, eap worked fine with the partly-functional mutant hybrid freeradius v2/3 that I ended up with when I tried to install the unofficial freeradius v3 release for Ubuntu. Dustin p.s.: using v2 since v3 isn't supported on Ubuntu yet. After a full week of trying both the unofficial release and attempting to compile it myself, I realized that I don't know anywhere near enough about freeradius to debug it properly. "radtest" output: root@gremlin:/etc/freeradius# radtest -t eap-md5 bobsql h3llo 127.0.0.1 100 t3sting123 Sending Access-Request packet to host 127.0.0.1 port 1812, id=249, length=0 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 192.168.0.166 NAS-Port = 100 Message-Authenticator = 0x00 EAP-Code = Response EAP-Type-Identity = "bobsql" EAP-Message = 0x02f8000b01626f6273716c Received Access-Challenge packet from host 127.0.0.1 port 1812, id=249, length=64 EAP-Message = 0x01f900061920 Message-Authenticator = 0x67456e4b517c4e986b3d0c7f23d589a1 State = 0x141de28714e4fbb2053fa9d69b9894c2 EAP-Id = 249 EAP-Code = Request EAP-Type-TTLS = 0x20 root@gremlin:/etc/freeradius# "freeradius -X" output: root@gremlin:/etc/freeradius# freeradius -X FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Aug 26 2015 at 14:47:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/mschap.new including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/mschap.bak including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "t3sting123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 192.168.0.99 { require_message_authenticator = no secret = "t3sting123" shortname = "OfficeAP" nastype = "other" } client 192.168.0.103 { require_message_authenticator = no secret = "t3sting123" shortname = "OfficeUbiquitiAP" nastype = "other" } client 192.168.0.102 { require_message_authenticator = no secret = "t3sting123" shortname = "DustinUbuntu" nastype = "other" } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "t3sting123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "radpass" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 54028 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.102 port 51972, id=22, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x63b41003de06fef4cdb10d9c674732c1 EAP-Message = 0x024c000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 76 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 22 to 192.168.0.102 port 51972 EAP-Message = 0x014d00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc5d1b741c59cae74e5c335d132a13974 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 22 with timestamp +19 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xc5d1b741c59cae74 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.102 port 47914, id=228, length=76 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0xd09eb513c856865b83d9773becc09c8e # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "h3llo" [pap] Using clear text password "h3llo" [pap] User authenticated successfully ++[pap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 228 to 192.168.0.102 port 47914 Finished request 1. Going to the next request Waking up in 4.9 seconds. Cleaning up request 1 ID 228 with timestamp +33 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.102 port 45062, id=5, length=132 User-Name = "bobsql" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x1b2d3bc48e1628fcb67a4aabec4c7603 MS-CHAP-Challenge = 0x5431fdaef2ef481f MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000e386da5486bad62e690e1aecc0dbe0efa9027ee1d3a642d1 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 5 to 192.168.0.102 port 45062 MS-CHAP-MPPE-Keys = 0x567e728a9a0f730b1e841a812034ebe1960d1c03a812a7920000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.102 port 40888, id=206, length=132 User-Name = "bobsql" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x0292ae5c52b3c5905b43ae731beb7c63 MS-CHAP-Challenge = 0x597fc32c1884f15d MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000f480f2c91ecbb02affca1cd6e0aaf8530fea4f70431b300c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 1 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 206 to 192.168.0.102 port 40888 MS-CHAP-MPPE-Keys = 0x567e728a9a0f730b1e841a812034ebe1960d1c03a812a7920000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 3. Going to the next request Waking up in 2.7 seconds. rad_recv: Access-Request packet from host 192.168.0.102 port 35961, id=32, length=132 User-Name = "bobsql" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x2d707df31b6b58f446440e937e530bca MS-CHAP-Challenge = 0x71541771cc7aa8b4 MS-CHAP-Response = 0x000100000000000000000000000000000000000000000000000077613cdac309e699b0324e1318081226f5bb67816eb7765a # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 32 to 192.168.0.102 port 35961 MS-CHAP-MPPE-Keys = 0x567e728a9a0f730b1e841a812034ebe1960d1c03a812a7920000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 4. Going to the next request Waking up in 1.5 seconds. Cleaning up request 2 ID 5 with timestamp +51 Waking up in 2.2 seconds. Cleaning up request 3 ID 206 with timestamp +54 Waking up in 1.2 seconds. Cleaning up request 4 ID 32 with timestamp +55 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.102 port 53710, id=147, length=132 User-Name = "bobsql" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x037f49ae3b5ec235d4eaf2267a9b6e25 MS-CHAP-Challenge = 0x5ad7026bacfbcb0c MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000fd3865d282111e51a5d1e78a11224e705e16b4ab346fe1c3 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 147 to 192.168.0.102 port 53710 MS-CHAP-MPPE-Keys = 0x567e728a9a0f730b1e841a812034ebe1960d1c03a812a7920000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.102 port 55717, id=241, length=132 User-Name = "bobsql" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0xa99ccc3a5cca5d0421ce40151860f354 MS-CHAP-Challenge = 0x3ec6b2e188f8077e MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000008a8fc890c2cadcde9db7d78760239b1f592968d44a90cdfd # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 241 to 192.168.0.102 port 55717 MS-CHAP-MPPE-Keys = 0x567e728a9a0f730b1e841a812034ebe1960d1c03a812a7920000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 6. Going to the next request Waking up in 1.6 seconds. Cleaning up request 5 ID 147 with timestamp +79 Waking up in 3.3 seconds. Cleaning up request 6 ID 241 with timestamp +83 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.102 port 57932, id=206, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x03d3363df4078fcc0bbfd49d66c8a305 EAP-Message = 0x0291000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 145 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 206 to 192.168.0.102 port 57932 EAP-Message = 0x019200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3449d6e934dbcf8a2066e164bff70373 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.102 port 53425, id=97, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x0a13ff3dd26d20da7de439ed156f8f1e EAP-Message = 0x029b000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 155 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 1 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 97 to 192.168.0.102 port 53425 EAP-Message = 0x019c00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbb63c299bbffdb53b656996c0040d033 Finished request 8. Going to the next request Waking up in 2.9 seconds. Cleaning up request 7 ID 206 with timestamp +96 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x3449d6e934dbcf8a did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 2.0 seconds. rad_recv: Access-Request packet from host 192.168.0.102 port 52917, id=200, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 127.0.1.1 NAS-Port = 100 Message-Authenticator = 0x1b1dd77b91fd5119c952cba3c7b0789d EAP-Message = 0x02a5000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 165 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 200 to 192.168.0.102 port 52917 EAP-Message = 0x01a600061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfcde2609fc783fe3cd6f633607ab2cb1 Finished request 9. Going to the next request Waking up in 1.6 seconds. Cleaning up request 8 ID 97 with timestamp +98 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xbb63c299bbffdb53 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 3.3 seconds. Cleaning up request 9 ID 200 with timestamp +101 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xfcde2609fc783fe3 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 52521, id=229, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 192.168.0.166 NAS-Port = 100 Message-Authenticator = 0xd7caba718106a9d1e4802f69771d9a79 EAP-Message = 0x02e4000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 228 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 229 to 127.0.0.1 port 52521 EAP-Message = 0x01e500061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba25f065bac0e928512b36076da019ff Finished request 10. Going to the next request Waking up in 4.9 seconds. Cleaning up request 10 ID 229 with timestamp +129 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xba25f065bac0e928 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 33835, id=239, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 192.168.0.166 NAS-Port = 100 Message-Authenticator = 0xa1e0465c6ce9d505a1d80a9e5a4652be EAP-Message = 0x02ee000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 238 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 239 to 127.0.0.1 port 33835 EAP-Message = 0x01ef00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3ef8b2793e17abd6ae69ec18fa4cfd0f Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 47780, id=249, length=89 User-Name = "bobsql" User-Password = "h3llo" NAS-IP-Address = 192.168.0.166 NAS-Port = 100 Message-Authenticator = 0x522e550039140c1bb17ae9f549a2a18e EAP-Message = 0x02f8000b01626f6273716c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bobsql", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 248 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> bobsql [sql] sql_set_user escaped user --> 'bobsql' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bobsql' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bobsql' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bobsql' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 249 to 127.0.0.1 port 47780 EAP-Message = 0x01f900061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x141de28714e4fbb2053fa9d69b9894c2 Finished request 12. Going to the next request Waking up in 2.1 seconds. Cleaning up request 11 ID 239 with timestamp +141 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x3ef8b2793e17abd6 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 2.8 seconds. Cleaning up request 12 ID 249 with timestamp +143 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x141de28714e4fbb2 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests.

2 1

Freeradius with AD
by Jose 29 Apr '16

29 Apr '16

Hello, I'm new to this, so please show mercy on me. I managed to get Freeradius to work with AD. I have one SSID setup at the moment on the controller. So far any user with AD credentials that log into our wireless, gets connected. My boss wants me to tweak the system a bit to separate staff from students. We have an OU for staff and another for students. The problem I have is I have no idea where in radius do I configure this option. We want to be able to tell radius that if a student logs into for example to the staff SSID they are rejected but if they log into their student SSID, access is granted. How do I make that happen? Thank very much for any help you can provide.

2 3