May 2016 - Freeradius-Users - lists.freeradius.org

Re: TLS: assigning certificates to username
by Stefan Paetow 21 May '16

21 May '16

>I'm sure it is already documented, how to assign certificates to a >dedicated username. But I so far didn't find it. To my knowledge a TLS certificate will contain a username (a NAI) in TLS-Client-Cert-Common-Name. You can always check that if the TLS name does not match the username specified, you reject the request? :-) Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp(a)jabber.dev.ja.net skype: stefan.paetow.janet jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc¹s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. >

7 15

Simultaneous EC/RSA Certificates
by Adam Bishop 20 May '16

20 May '16

NGINX has just added support for serving an ECDSA and an RSA certificate simultaneously, keyed off the cipher selected with ECDSA as the preferred option. Obviously there's significant differences between HTTP and RADIUS, but could this be implemented in FreeRADIUS for EAP/RadSec? Regards, Adam Bishop Systems Development Specialist gpg: 0x6609D460 t: +44 (0)1235 822 245 xmpp: adamb(a)jabber.dev.ja.net jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.

2 1

Freeradius 3 - eDirectory Problem
by Bebbet van Dinges 20 May '16

20 May '16

Hello, I'm trying to authorize/authenticate my wifi users against edirectory with Freeradius3, which doesn't work. It worked with this configuration in 2.2, but doesn't seem to provide the required result anymore. I hope you can give me some pointers where to look next. Yours sincerely, Bebbet from raddebug: (74) Tue May 17 12:19:27 2016: Debug: openldap: Performing unfiltered search in "", scope "sub" (74) Tue May 17 12:19:27 2016: Debug: openldap: Waiting for search result... (74) Tue May 17 12:19:30 2016: ERROR: openldap: Ambiguous search result, returned 1723 unsorted entries (should return 1 or 0). Enable sorting, or specify a more restrictive base_dn, filter or scope (74) Tue May 17 12:19:30 2016: ERROR: openldap: The following entries were returned: [All the records in our directory\ /usr/loca/pf/raddb/modules-enabled/ldap: ldap openldap { server = "dns3.desaad.nl" port = 636 identity = "cn=admin,o=desaad" password = "You wish.." basedn = "o=desaad" # filter = "(cn=%{mschap:User-Name})" filter ="(&(objectClass=inetOrgPerson)(uid=%{Stripped-User-Name:-%{User-Name}}))" ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 access_attr = cn password_attribute = nspmPassword tls { start_tls = no require_cert = "allow" } dictionary_mapping = ${confdir}/ldap.attrmap edir_account_policy_check = yes keepalive { # LDAP_OPT_X_KEEPALIVE_IDLE idle = 60 # LDAP_OPT_X_KEEPALIVE_PROBES probes = 3 # LDAP_OPT_X_KEEPALIVE_INTERVAL interval = 3 } }

3 6

rlm_rest authentication failures in rest module
by Karuna Kumar 20 May '16

20 May '16

Hi, I am using FreeRADIUS 3.0.11. Unable to authenticate the user through rest module. I am able to send request to REST API server and also able to fetch response in FreeRADIUS. But, the log says "(1) Failed to authenticate the user". Please let me know whether I did something wrong or I have to configure anything anywhere else. Configuration and logs are pasted below for your reference. Thanks in advance. --------------------------------------------- CONFIGURATIONS IN raddb/sites-enabled/default --------------------------------------------- authorize { if (User-Password) { update control { Cleartext-Password := &User-Password Auth-Type := rest } } } authenticate { rest } --------------------------------------------- CONFIGURATIONS IN raddb/mods-available/rest --------------------------------------------- connect_uri = "http://192.168.1.25:8900/" authorize { uri = "${..connect_uri}/hns/FreeRadiusTest.jsp?test=value&action=authorize&calledStationId=%{Called-Station-ID}&userName=%{User-Name}" method = 'get' tls = ${..tls} } authenticate { uri = "${..connect_uri}/hns/FreeRadiusTest.jsp?test=value&action=authenticate&calledStationId=%{Called-Station-ID}&userName=%{User-Name}" method = 'get' tls = ${..tls} } accounting { uri = "${..connect_uri}/hns/FreeRadiusTest.jsp?test=value&action=accounting&calledStationId=%{Called-Station-ID}&userName=%{User-Name}&acctSessionId=%{Acct-Unique-Session-ID}" method = 'post' tls = ${..tls} } post-auth { uri = "${..connect_uri}/hns/FreeRadiusTest.jsp?test=value&action=postauth&calledStationId=%{Called-Station-ID}&userName=%{User-Name}" method = 'post' tls = ${..tls} } --------------------------------------------- radtest command output --------------------------------------------- # radtest test test localhost 0 testing123 Sent Access-Request Id 243 from 0.0.0.0:55212 to 127.0.0.1:1812 length 74 User-Name = "test" User-Password = "test" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "test" Received Access-Reject Id 243 from 127.0.0.1:1812 to 0.0.0.0:0 length 35 Reply-Message = "Hello from KK" (0) -: Expected Access-Accept got Access-Reject --------------------------------------------- radiusd console debug logs --------------------------------------------- Ready to process requests (2) Received Access-Request Id 243 from 127.0.0.1:55212 to 127.0.0.1:1812 length 74 (2) User-Name = "test" (2) User-Password = "test" (2) NAS-IP-Address = 127.0.0.1 (2) NAS-Port = 0 (2) Message-Authenticator = 0xa554ee1ed0ff34cbd52a28d7ff14f641 (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) if (User-Password) { (2) if (User-Password) -> TRUE (2) if (User-Password) { (2) update control { (2) Cleartext-Password := &User-Password -> 'test' (2) Auth-Type := rest (2) } # update control = noop (2) } # if (User-Password) = noop (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "test", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: No EAP-Message, not doing EAP (2) [eap] = noop (2) files: users: Matched entry test at line 1 (2) [files] = ok (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = ok (2) Found Auth-Type = rest (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { rlm_rest (rest): Closing connection (2): Hit idle_timeout, was idle for 1049 seconds rlm_rest (rest): Closing connection (3): Hit idle_timeout, was idle for 1049 seconds rlm_rest (rest): Closing connection (4): Hit idle_timeout, was idle for 1049 seconds rlm_rest (rest): Closing connection (0): Hit idle_timeout, was idle for 1047 seconds rlm_rest (rest): Closing connection (5): Hit idle_timeout, was idle for 1047 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): Closing connection (1): Hit idle_timeout, was idle for 1041 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): Closing connection (6): Hit idle_timeout, was idle for 1041 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): 0 of 0 connections in use. You may need to increase "spare" rlm_rest (rest): Opening additional connection (7), 1 of 32 pending slots used rlm_rest (rest): Connecting to "http://192.168.1.25:8900/" rlm_rest (rest): Reserved connection (7) (2) rest: Expanding URI components (2) rest: EXPAND http://192.168.1.25:8900 (2) rest: --> http://192.168.1.25:8900 (2) rest: EXPAND //hns/FreeRadiusTest.jsp?test=value&action=authenticate&calledStationId=%{Called-Station-ID}&userName=%{User-Name} (2) rest: --> //hns/FreeRadiusTest.jsp?test=value&action=authenticate&calledStationId=&userName=test (2) rest: Sending HTTP GET to "http://192.168.1.25:8900//hns/FreeRadiusTest.jsp?test=value&action=authenti…" (2) rest: Processing response header (2) rest: Status : 200 (OK) (2) rest: Type : json (application/json) (2) rest: Parsing attribute "reply:User-Name" (2) rest: EXPAND test (2) rest: --> test (2) rest: User-Name := "test" (2) rest: Parsing attribute "reply:User-Password" (2) rest: EXPAND test (2) rest: --> test (2) rest: User-Password := "test" (2) rest: Parsing attribute "control:ClearText-Password" (2) rest: EXPAND test (2) rest: --> test (2) rest: Cleartext-Password := "test" (2) rest: Parsing attribute "reply:Reply-Message" (2) rest: EXPAND Hello from KK (2) rest: --> Hello from KK (2) rest: Reply-Message := "Hello from KK" rlm_rest (rest): Released connection (7) rlm_rest (rest): Need 2 more connections to reach 10 spares rlm_rest (rest): Opening additional connection (8), 1 of 31 pending slots used rlm_rest (rest): Connecting to "http://192.168.1.25:8900/" (2) [rest] = updated (2) } # authenticate = updated (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> test (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) [eap] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # Post-Auth-Type REJECT = updated (2) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 243 from 127.0.0.1:1812 to 127.0.0.1:55212 length 35 (2) Reply-Message = "Hello from KK" Waking up in 3.9 seconds. (2) Cleaning up request packet ID 243 with timestamp +1049 Ready to process requests Thanks, Karun.

1 1

Old Users File won't Load on 3.x
by Norman Zhang 19 May '16

19 May '16

I ported the old Users 2.x file over to 3.x, but getting the following error. I'm thinking it's \" is causing issues. Did version 3.x change the way to include " " in the string? Thanks, Norman May 18 16:49:49 server01 radiusd[29811]: reading pairlist file /etc/raddb/mods-config/files/authorize May 18 16:49:49 server01 radiusd[29811]: /etc/raddb/mods-config/files/authorize[20]: Parse error (reply) for entry DEFAULT: Expected end of ...or comma May 18 16:49:49 server01 radiusd[29811]: Failed reading /etc/raddb/mods-config/files/authorize May 18 16:49:49 server01 radiusd[29811]: /etc/raddb/mods-enabled/files[9]: Instantiation failed for module "files" # # The rest of this file contains the several DEFAULT entries. # DEFAULT entries match with all login names. # Note that DEFAULT entries can also Fall-Through (see first entry). # A name-value pair from a DEFAULT entry will _NEVER_ override # an already existing name-value pair. # # # First setup all accounts to be checked against the UNIX /etc/passwd. # (Unless a password was already given earlier in this file). # DEFAULT Group == users-ro, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:priv-lvl=7" DEFAULT Group == users-rw, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:roles*\"network-admin vdc-admin\"", cisco-avpair += "shell:priv-lvl=15" DEFAULT Group == usersb-ro, Auth-Type = System Service-Type = NAS-Prompt-User, cisco-avpair := "shell:roles=usersb"

3 6

SQL-User-Name in %{sql:..} expansion
by Jakob Hirsch 19 May '16

19 May '16

Hi, I am currently in the process of migrating our 2.2.9 setup to 3.0.11 and, naturally, stumbled over a few things (i.e. more messages will follow). It seems that SQL-User-Name is not usable in expansions any more, only when calling the module (we use authorize_check_query and authorize_reply_query). When I put this (for testing only) in my authorize section ... update { request:Stripped-User-Name := "bla" } update { control:Tmp-String-0 := "%{sql:SELECT '%{SQL-User-Name}'}" } ... I get this in the debug output: (0) authorize { (0) update { (0) request:Stripped-User-Name := "bla" (0) } # update = noop (0) update { (0) EXPAND %{Stripped-User-Name} (0) --> bla (0) SQL-User-Name set to 'bla' rlm_sql (sql): Reserved connection (1) (0) Executing select query: SELECT '' rlm_sql (sql): Released connection (1) (0) EXPAND %{sql:SELECT '%{SQL-User-Name}'} (0) --> (0) control:Tmp-String-0 := (0) } # update = noop ... So, it says that Stripped-User-Name will contain "bla", but in the query it is the empty string. Is this intended, a glitch, or am I doing something wrong? My current workaround is to escape myself (with %{escape:%{Stripped-User-Name}} and proper escape_characters in the expr config). Regards Jakob

4 7

Problems with Active directory integration
by Spider s 19 May '16

19 May '16

------------------------------ *Problems with AD integration* ------------------------------ Fri, May 13, 2016 at 10:43 AM Hello, I have got a problem with AD integration. I follow this guide http://deployingradius.com/documents/configuration/active_directory.html. All is correct, all accepted and all test passed. Perfect :-) Now I need use AD integration, this is the problem. First i describe my scenario: One windows 2003 server with AD and dns server, with a user (full administrator privileged) One ubuntu server 16 (ubunturadius) with the las radius version build. Native Samba (apt-get install) no build from source. One Unifi wifi Access Point with Our Radius server configured. (ip+ secret) for auth. 1 windows 7 client (user for connect to wifi) Freeradius last build from source 3.0.11 All local test from my ubuntu server are correct (about guide). My test: (for privacy change real domain for “myrealdomain” and my user “myrealuser” root@ubunturadius:~# net join -U MYREALUSER Enter MYREALUSER's password: Using short domain name -- MYREALDOMAIN Joined 'UBUNTURADIUS' to dns domain 'MYREALDOMAIN.es' root@ubunturadius:~# net ads info LDAP server: 192.168.1.2 LDAP server name: adserver.MYREALDOMAIN.es Realm: MYREALDOMAIN.ES Bind Path: dc=MYREALDOMAIN,dc=ES LDAP port: 389 Server time: jue, 12 may 2016 14:20:27 CEST KDC server: 192.168.1.2 Server time offset: -35 ----------------------------------------------------------------------------------- root@ubunturadius:~# ntlm_auth --request-nt-key --domain=MYREALDOMAIN --username=MYREALUSER Password: NT_STATUS_OK: Success (0x0) root@ubunturadius:~# I want: Users can access to my wifi network with active directory credentials only, no need install cert on windows clients or phones. This are my warnigs: [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) (6) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (6) pap: WARNING: Authentication will fail unless a "known good" password is available (7) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (7) pap: WARNING: Authentication will fail unless a "known good" password is available And this are the errors: (4) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (4) eap_peap: ERROR: TLS_accept: Failed in unknown state (4) eap_peap: ERROR: SSL says: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (4) eap_peap: ERROR: SSL_read failed inside of TLS (-1), TLS session failed (4) eap_peap: ERROR: TLS receive handshake failed during operation (4) eap_peap: ERROR: [eaptls process] = fail (4) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (7) eap_leap: ERROR: No Cleartext-Password or NT-Password configured for this user (7) eap: ERROR: Failed continuing EAP LEAP (17) session. EAP sub-module failed (6) eap_leap: ERROR: Successfully initiated Any suggestion??? , or next steps ?? I am new with freeradius, sorry. Thank you in advanced This is my complete debug output: root@ubunturadius:~# clear root@ubunturadius:~# radiusd -X Server was built with: accounting : yes authentication : yes ascend-binary-attributes : yes coa : yes control-socket : yes detail : yes dhcp : yes dynamic-clients : yes osfc2 : no proxy : yes regex-pcre : no regex-posix : yes regex-posix-extended : yes session-management : yes stats : yes tcp : yes threads : yes tls : yes unlang : yes vmps : yes developer : no Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.2g release Endianness: little Compilation flags: cppflags : cflags : -I/home/user/freeradius-server-3.0.11 -I/home/user/freeradius-server-3.0.11/src -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/autoconf.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/build.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/features.h -include /home/user/freeradius-server-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 ldflags : libs : -lcrypto -lssl -ltalloc -lnsl -lresolv -ldl -lpthread Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/dhcp including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/accounting including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rbb { ipaddr = 192.168.1.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = ntlm_auth # Creating Auth-Type = eap # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYREALDOMAIN} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" passchange { } allow_retry = yes } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_exec # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYREALDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_dhcp # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp # Loaded module rlm_detail # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 53418 Listening on proxy address :: port 37259 Ready to process requests (0) Received Access-Request Id 39 from 192.168.1.103:52056 to 192.168.1.26:1812 length 179 (0) User-Name = "MYREALUSER" (0) NAS-IP-Address = 192.168.1.103 (0) NAS-Identifier = "0418d68032b7" (0) NAS-Port = 0 (0) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (0) Calling-Station-Id = "28-E3-47-0E-0A-F7" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02ec0010016a6f73652e63657065726f (0) Message-Authenticator = 0x169c8d9ad784903f1bd0b583a26ca507 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 236 length 16 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 237 length 6 (0) eap: EAP session adding &reply:State = 0x213be1f821d6f8f8 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 39 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (0) EAP-Message = 0x01ed00061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x213be1f821d6f8f8b05101e28231c08a (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 40 from 192.168.1.103:52056 to 192.168.1.26:1812 length 286 (1) User-Name = "MYREALUSER" (1) NAS-IP-Address = 192.168.1.103 (1) NAS-Identifier = "0418d68032b7" (1) NAS-Port = 0 (1) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (1) Calling-Station-Id = "28-E3-47-0E-0A-F7" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02ed006919800000005f160301005a01000056030157358d6168584ad09fa0f105559e3bb09c3b9eaac367f5c0d41a4db455974cd6000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 (1) State = 0x213be1f821d6f8f8b05101e28231c08a (1) Message-Authenticator = 0xdaf55d9f2e9ce4b1739c2e1db02ead0b (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 237 length 105 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x213be1f821d6f8f8 (1) eap: Finished EAP session with state 0x213be1f821d6f8f8 (1) eap: Previous EAP request found for state 0x213be1f821d6f8f8, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 95 bytes (1) eap_peap: Got complete TLS record (95 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.0 Handshake [length 005a], ClientHello (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 0051], ServerHello (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 08d3], Certificate (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 238 length 1004 (1) eap: EAP session adding &reply:State = 0x213be1f820d5f8f8 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 40 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (1) EAP-Message = 0x01ee03ec19c00000093716030100510200004d030117f97f399f7607013c81be95e916b853f0af8940fe00483d24d292acc04d6c96202ed977ab59e2b1fb53c6c9b03bfdb057bcbeae26a2ded9b658a86b7c856222e8002f000005ff0100010016030108d30b0008cf0008cc0003de308203da308202c2 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x213be1f820d5f8f8b05101e28231c08a (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 41 from 192.168.1.103:52056 to 192.168.1.26:1812 length 187 (2) User-Name = "MYREALUSER" (2) NAS-IP-Address = 192.168.1.103 (2) NAS-Identifier = "0418d68032b7" (2) NAS-Port = 0 (2) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (2) Calling-Station-Id = "28-E3-47-0E-0A-F7" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02ee00061900 (2) State = 0x213be1f820d5f8f8b05101e28231c08a (2) Message-Authenticator = 0xcecba156154f172e720424669959ad3f (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 238 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x213be1f820d5f8f8 (2) eap: Finished EAP session with state 0x213be1f820d5f8f8 (2) eap: Previous EAP request found for state 0x213be1f820d5f8f8, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 239 length 1000 (2) eap: EAP session adding &reply:State = 0x213be1f823d4f8f8 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 41 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (2) EAP-Message = 0x01ef03e81940deae09109e56ad849054396ba17da89f127c950c93e7bcbc602b4c0d2adc5323d898d7aad12ad21d9c0afb4ea7378e65a806dc48f3e4ae3e253b1d3c52917d8495e53bab97b882d3c0a5e36bd0d617508e184937cb00df053f568a4657224164530004e8308204e4308203cca003020102 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x213be1f823d4f8f8b05101e28231c08a (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 42 from 192.168.1.103:52056 to 192.168.1.26:1812 length 187 (3) User-Name = "MYREALUSER" (3) NAS-IP-Address = 192.168.1.103 (3) NAS-Identifier = "0418d68032b7" (3) NAS-Port = 0 (3) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (3) Calling-Station-Id = "28-E3-47-0E-0A-F7" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x02ef00061900 (3) State = 0x213be1f823d4f8f8b05101e28231c08a (3) Message-Authenticator = 0x5f3f688d970d1bdfa3e872dc559c4c02 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 239 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x213be1f823d4f8f8 (3) eap: Finished EAP session with state 0x213be1f823d4f8f8 (3) eap: Previous EAP request found for state 0x213be1f823d4f8f8, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 240 length 377 (3) eap: EAP session adding &reply:State = 0x213be1f822cbf8f8 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 42 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (3) EAP-Message = 0x01f0017919007479820900b42a350d68446398300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007ca83bdbc26445 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x213be1f822cbf8f8b05101e28231c08a (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 43 from 192.168.1.103:52056 to 192.168.1.26:1812 length 198 (4) User-Name = "MYREALUSER" (4) NAS-IP-Address = 192.168.1.103 (4) NAS-Identifier = "0418d68032b7" (4) NAS-Port = 0 (4) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (4) Calling-Station-Id = "28-E3-47-0E-0A-F7" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x02f0001119800000000715030100020230 (4) State = 0x213be1f822cbf8f8b05101e28231c08a (4) Message-Authenticator = 0x7eeb20ed0df98fc783a20041297e8bf5 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "MYREALUSER", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 240 length 17 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x213be1f822cbf8f8 (4) eap: Finished EAP session with state 0x213be1f822cbf8f8 (4) eap: Previous EAP request found for state 0x213be1f822cbf8f8, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 7 bytes (4) eap_peap: Got complete TLS record (7 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca (4) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (4) eap_peap: ERROR: TLS_accept: Failed in unknown state (4) eap_peap: ERROR: SSL says: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (4) eap_peap: ERROR: SSL_read failed inside of TLS (-1), TLS session failed (4) eap_peap: ERROR: TLS receive handshake failed during operation (4) eap_peap: ERROR: [eaptls process] = fail (4) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (4) eap: Sending EAP Failure (code 4) ID 240 length 4 (4) eap: Failed in EAP select (4) [eap] = invalid (4) } # authenticate = invalid (4) Failed to authenticate the user (4) Using Post-Auth-Type Reject (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Post-Auth-Type REJECT { (4) attr_filter.access_reject: EXPAND %{User-Name} (4) attr_filter.access_reject: --> MYREALUSER (4) attr_filter.access_reject: Matched entry DEFAULT at line 11 (4) [attr_filter.access_reject] = updated (4) [eap] = noop (4) policy remove_reply_message_if_eap { (4) if (&reply:EAP-Message && &reply:Reply-Message) { (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (4) else { (4) [noop] = noop (4) } # else = noop (4) } # policy remove_reply_message_if_eap = noop (4) } # Post-Auth-Type REJECT = updated (4) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (4) Sending delayed response (4) Sent Access-Reject Id 43 from 192.168.1.26:1812 to 192.168.1.103:52056 length 44 (4) EAP-Message = 0x04f00004 (4) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (5) Received Access-Request Id 44 from 192.168.1.103:52056 to 192.168.1.26:1812 length 169 (5) User-Name = "MYREALDOMAIN" (5) NAS-IP-Address = 192.168.1.103 (5) NAS-Identifier = "0418d68032b7" (5) NAS-Port = 0 (5) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (5) Calling-Station-Id = "28-E3-47-0E-0A-F7" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x02fa000b01736f6c74656c (5) Message-Authenticator = 0xaf25fda9c2b97c696a3a1b54d88ba8ca (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 250 length 11 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Initiating new EAP-TLS session (5) eap_peap: [eaptls start] = request (5) eap: Sending EAP Request (code 1) ID 251 length 6 (5) eap: EAP session adding &reply:State = 0xf20a0301f2f11a12 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 44 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (5) EAP-Message = 0x01fb00061920 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xf20a0301f2f11a12b0e0c11e2bbab466 (5) Finished request Waking up in 2.7 seconds. (6) Received Access-Request Id 45 from 192.168.1.103:52056 to 192.168.1.26:1812 length 182 (6) User-Name = "MYREALDOMAIN" (6) NAS-IP-Address = 192.168.1.103 (6) NAS-Identifier = "0418d68032b7" (6) NAS-Port = 0 (6) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (6) Calling-Station-Id = "28-E3-47-0E-0A-F7" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x02fb00060311 (6) State = 0xf20a0301f2f11a12b0e0c11e2bbab466 (6) Message-Authenticator = 0x8a7e70008c3bf52db7042bc5fc7410bf (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 251 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (6) pap: WARNING: Authentication will fail unless a "known good" password is available (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xf20a0301f2f11a12 (6) eap: Finished EAP session with state 0xf20a0301f2f11a12 (6) eap: Previous EAP request found for state 0xf20a0301f2f11a12, released from the list (6) eap: Peer sent packet with method EAP NAK (3) (6) eap: Found mutually acceptable type LEAP (17) (6) eap: Calling submodule eap_leap to process data (6) eap_leap: Stage 2 (6) eap_leap: Issuing AP Challenge (6) eap_leap: ERROR: Successfully initiated (6) eap: Sending EAP Request (code 1) ID 252 length 22 (6) eap: EAP session adding &reply:State = 0xf20a0301f3f61212 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 45 from 192.168.1.26:1812 to 192.168.1.103:52056 length 0 (6) EAP-Message = 0x01fc00161101000846a35641fcdf0b48736f6c74656c (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xf20a0301f3f61212b0e0c11e2bbab466 (6) Finished request Waking up in 2.7 seconds. (7) Received Access-Request Id 46 from 192.168.1.103:52056 to 192.168.1.26:1812 length 214 (7) User-Name = "MYREALDOMAIN" (7) NAS-IP-Address = 192.168.1.103 (7) NAS-Identifier = "0418d68032b7" (7) NAS-Port = 0 (7) Called-Station-Id = "04-18-D6-82-32-B7:Test_betis" (7) Calling-Station-Id = "28-E3-47-0E-0A-F7" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x02fc002611010018dd952ffac3a648e2d0da9ff39d9652f607297d7837811c77736f6c74656c (7) State = 0xf20a0301f3f61212b0e0c11e2bbab466 (7) Message-Authenticator = 0xf5a04a8e118baddb17c2aab8a38c046b (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "MYREALDOMAIN", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 252 length 38 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (7) pap: WARNING: Authentication will fail unless a "known good" password is available (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xf20a0301f3f61212 (7) eap: Finished EAP session with state 0xf20a0301f3f61212 (7) eap: Previous EAP request found for state 0xf20a0301f3f61212, released from the list (7) eap: Peer sent packet with method EAP LEAP (17) (7) eap: Calling submodule eap_leap to process data (7) eap_leap: ERROR: No Cleartext-Password or NT-Password configured for this user (7) eap: ERROR: Failed continuing EAP LEAP (17) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 252 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> MYREALDOMAIN (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 46 from 192.168.1.26:1812 to 192.168.1.103:52056 length 44 (7) EAP-Message = 0x04fc0004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.7 seconds. (0) Cleaning up request packet ID 39 with timestamp +25 (1) Cleaning up request packet ID 40 with timestamp +25 (2) Cleaning up request packet ID 41 with timestamp +25 (3) Cleaning up request packet ID 42 with timestamp +25 (4) Cleaning up request packet ID 43 with timestamp +25 Waking up in 2.1 seconds. (5) Cleaning up request packet ID 44 with timestamp +27 (6) Cleaning up request packet ID 45 with timestamp +27 (7) Cleaning up request packet ID 46 with timestamp +27 Ready to process requests

4 6

Detect source interface ad a attribute
by Mikhail Gaydamaka 18 May '16

18 May '16

Good day I want to process some radius packets depending on the source interface radiusd.conf # Some interface 1 listen { ipaddr = 192.168.26.225 port = 1812 type = auth } listen { ipaddr = 192.168.26.225 port = 1813 type = acct } # Some interface 2 listen { ipaddr = 192.168.62.1 port = 1812 type = auth } listen { ipaddr = 192.168.62.1 port = 1813 type = acct } sites-available/default if (Src-Ip=="192.168.26.225") { module1 } elsif (Src-Ip=="192.168.62.1") { module2 } else { module } How can I configure it?

2 1

RE: LDAP + SASL Freeradius 3.0.11
by Matthew Beckler 17 May '16

17 May '16

Date: Thu, 5 May 2016 21:20:37 +0000 From: "Danner, Mearl" <jmdanner(a)samford.edu> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: RE: LDAP + SASL Freeradius 3.0.11 > You'll probably need the FQDN of the user. I.E. cn=ldaplookup, .......... Sorry I forgot to mention I did try it with the FQDN same error. Also I could not get the FQDN to work with ldapsearch I wonder if I need to use a different option to use fqdn with LDAPsearch. > Also, with most AD implementations the Users container is CN= rather than OU= In this case the person who setup AD moved all the users from the default users container to an OU called users. Matt

4 16

maximum-timeout in ippool do not work?
by Yanrui Hu 17 May '16

17 May '16

Guys, I recently use rlm_ippool to let freeradius assign strongswan user ip. By ACCT-STOP, freeradius can release the ip that assigned to user. But for the case that accounting packet lost, we need a timeout mechanism. But in ippool file, I set maximum-timout, but it do not work. the ip was not released even that user already lost for a long time. Any suggestions? -- Best Regards, Yanrui Hu -- *This email may contain or reference confidential information and is intended only for the individual to whom it is addressed. Please refrain from distributing, disclosing or copying this email and the information contained within unless you are the intended recipient. If you received this email in error, please notify us at legal(a)appannie.com <legal(a)appannie.com>** immediately and remove it from your system.*

2 1