June 2016 - Freeradius-Users - lists.freeradius.org

Radius - CISCO Mac Authentication
by sokphak touch 15 Jun '16

15 Jun '16

Dear Radius Community, I would like to test one lab as describe below. There are few CISCO Layer 2 switches located by building floors. I have a few clients in the organization. I want every user connected to any switch will getting the VLAN ID assignment from Radius server. Suppose it will authenticated by MAC address of each PCs. If the MAC not exist in radius database, client's pc could not have any access to network. I'm not sure if CISCO and Radius could do as requirement above? Thanks for input from everyone. Regards, Victor

3 4

freeradius load and message handling
by liran kessel 14 Jun '16

14 Jun '16

Hi, we have a freeradius server collecting accounting events from a few Nokia GGSN’s and are storing them into the MySQL DB. Now that we have activated all messages we are receiving around 20K messages a minute, and have started seeing these events in the radius.log Tue Jun 14 22:53:33 2016 : Info: WARNING: Please check the configuration file. The value for 'max_requests' is probably set too low. it was originally set to 1024, when we increased it and set it to 4096 the amount of such events was reduced but still didn’t disappear. If we set it higher (6100 for example) we start getting these errors Tue Jun 14 21:30:02 2016 : Error: Received conflicting packet from client localhost port 41935 - ID: 200 due to unfinished request 192178. Giving up on old request. why does this event appear? what would be the best way to manage this situation? The server has 8 Cores and 4GB of RAM. It seems that the CPU isn’t overly loaded, but our RAM is almost completely used by the Radius and Mysql processes. Will adding RAM to this server help us? or isn’t it the bottleneck for this issue? Thanks Liran

3 8

Re: winbind vs ntlm_auth
by 3＠D4rkn3ss DuMb 14 Jun '16

14 Jun '16

Thank you Alan! Helped a lot :) > > Message: 1 > Date: Mon, 13 Jun 2016 19:22:27 +0300 > From: "3@D4rkn3ss DuMb" <32d4rkn3ss(a)gmail.com> > To: Freeradius-Users(a)lists.freeradius.org > Subject: winbind vs ntlm_auth > Message-ID: > < > CAMDafwCrPp7Ev-rQhX_haS0L_PjGSqVg+LMGZtDiAiCLZkkZwA(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Dear List, > > I have a wired 802.1X working setup using the following: > - PEAPoMSCHAPv2 + Mac verification in MySQL DB for all 802.1X capable > endpoints. > - MAB only for all non 802.1X capable endpoints. > > but still, I am confused about the difference a simple ntlm_auth as an > authentication method used by winbind, and a 'direct' winbind > authentication (from a freeradius point of view)! > > My main concern is here: > http://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind > > and my setup used > > http://wiki.freeradius.org/guide/FreeRADIUS-Active-Directory-Integration-HO… > > > .. Any explanation would really be appreciated :) > > thank you, > > > ------------------------------ > > Message: 2 > Date: Tue, 14 Jun 2016 07:55:42 +0000 > From: A.L.M.Buxey(a)lboro.ac.uk > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: winbind vs ntlm_auth > Message-ID: <20160614075542.GA28357(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > > > but still, I am confused about the difference a simple ntlm_auth as an > > authentication method used by winbind, and a 'direct' winbind > > authentication (from a freeradius point of view)! > > the old legacy method uses ntlm_auth as an extrenal program to do > authentication > > the native/direct winbind method uses the winbind libraries so that > authentication is > done directly by FreeRADIUS, using a winbind connection pool (just like > SQL,LDAP etc) > and not calling/spawning an external program. result is much much faster > authentications and better scaling. > > your FR will need to be latest version compiled against recent SAMBA > correctly. unlikely > that such a packge will come from your distro providers right now > > alan > > > >

1 0

Freeradius and 2 Factor Authentication
by Aaron Smith 14 Jun '16

14 Jun '16

I've been working on setting up a Microsoft Routing and Remote Access server that uses Freeradius for Authentication. Out of the box, it works fine with simple user entries in the "users" file. This is with both the Ubuntu 14.04 apt-get installations of Freeradius (2.1.x) as well as a compiled from source version of Freeradius 2.2.9. I run in to trouble when I try to add two factor authentication to the mix. I'm trying to use LinOTP as a possible replacement of our CryptoCard Blackshield implementation. The problem is that both products seem to only work with unencrypted passwords. LinOTP has two options for Freeradius authentication. There is a linotp2 module that can be compiled and installed along with Freeradius, and there is also a perl script that can be linked in with the rlm_perl module. Looking at the perl script, it is expecting to find the attribute "User-Password" in the radius request, which it uses, along with the username, to go to a web URL on the LinOTP server to verify authentication. I suspect that the linotp2 module works similarly. The documentation provided by LinOTP says to set "DEFAULT Auth-Type := linotp2" if you're using the module or "DEFAULT Auth-Type := perl" if you're using the perl script in the freeradius users file. Now, this will "work" for narrow authentication types like Microsoft's SSTP with an unencrypted password, but I'd like this solution to be more widely usable (Macs, iOS devices, etc) and use something like IKEv2, but that uses EAP-MSCHapv2. If I try that, the authentication fails saying there is no password. My question is...am I tilting at windmills trying to make this work? I feel like it *should* be possible to do 2 factor authentication without having to resort to PPTP/unecrypted password or microsoft's proprietary SSTP. Is there a way to have freeradius pass the MSChapv2 password to a perl script or another module? Or perhaps it's possible to modify the perl script so it can accept an encrypted password? I feel like maybe there's a way to configure authentication in the "inner-tunnel" freeradius site that would make this possible. EAP-MSChapv2 authentication works with a plain, unencrypted password in the users file, so it obviously HAS the password that the user sends in SOME fashion. A secondary question is that I imagine I can't be the first person to use Freeradius with 2 factor authentication. I'd be curious to know how other folks have tackled this project and what products they used to accomplish it. ----------------------------------- Aaron Smith System Administrator Information Services Kalamazoo College 1200 Academy Street, Kalamazoo, MI 49006 (269) 337-7496 Aaron.Smith(a)kzoo.edu

9 43

winbind vs ntlm_auth
by 3＠D4rkn3ss DuMb 14 Jun '16

14 Jun '16

Dear List, I have a wired 802.1X working setup using the following: - PEAPoMSCHAPv2 + Mac verification in MySQL DB for all 802.1X capable endpoints. - MAB only for all non 802.1X capable endpoints. but still, I am confused about the difference a simple ntlm_auth as an authentication method used by winbind, and a 'direct' winbind authentication (from a freeradius point of view)! My main concern is here: http://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind and my setup used http://wiki.freeradius.org/guide/FreeRADIUS-Active-Directory-Integration-HO… .. Any explanation would really be appreciated :) thank you,

2 1

FR 3.0.11 \ ubuntu 16.04 winbind Active directory group validation issue.
by Jean-Pierre Zurbrügg 13 Jun '16

13 Jun '16

Hello everyone, Ubuntu 16.04 64bit Freeradius 3.0.11 (from ppa.launchpad.net/freeradius/stable-3.0/ubuntu) Samba 4.3.9-Ubuntu I have a freeradius 3.0.4 (git #7c9d5fb) running under ubuntu 14.04 correctly and I'm Trying to replicate this functionality on a new Ubuntu 16.04 LAB VM but I'm having dificulties validating Group memberships via a Winbind ~ Active Directory setup. The configuration was done manually; I did not copy any files from the FR 3.0.4 machine. I have disabled sites-enabled/default and put my own site called DGP along with a default inner-tunnel configuration file. In the DGP site's Post-Auth {} section I'm trying to validate the 'Group' Attribute via the following IF statement: if (Group == "ADLAB\\\\fw-wifi-access") {} which generates the following line while debugging: Failed resolving GID: No error winbindd -SFd5 generates the following debug snippet when validating the IF statement above: ---- getpwnam ADLAB\userx getgrnam ADLAB\\fw-wifi-access child daemon request 59 msrpc_name_to_sid: name=ADLAB\\fw-wifi-access name_to_sid [rpc] ADLAB\\fw-wifi-access for domain ADLAB rpc_api_pipe: host dc01.adlab.local rpc_write_send: data_to_write: 176 rpc_read_send: data_to_read: 176 Finished processing child request 59 Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED ---- While troubleshooting I changed the IF statement to: if (Group == "ADLAB\\fw-wifi-access") {} and this time I no longer get the 'Failed resolving GID: No error' entry but the IF statement returns false instead of true (the AD user is a member of this group). I don't know what else to check in order to correct this problem. I'd appreciate any tips given. Thanks in advance! ##################################################### Troubleshooting I've done: wbinfo -u # returns all AD users without the domain Preffix wbinfo -g # returns AD groups without the domain Preffix ntlm_auth --request-nt-key --domain=<domain> --username=<user> # works id <user> # returns user group membership <number>(<Group Name>) id <DOMAIN>\<user> # returns user group membership <number>(<Group Name>) wbinfo -G 7513 # returns SID value I need to execute id <user> or id <domain>\<user> before I can use this command. wbinfo -Y S-1-5-21-297524306-2253920702-176340032-2513 # returns 7513 I've tried validating against ADLAB\\\\, ADLAB\\, and group name without prefix. I've tried using all CAPS and all LOWERCASE for domain and group name. ### user freerad group memberships: root@lnx1604lab01:/# groups freerad freerad : freerad shadow winbindd_priv ssl-cert root@lnx1604lab01:/# ls -lh /var/run/samba/ | grep winbindd_privileged; ls -lh /var/lib/samba |grep winbindd_privileged drwxr-x--- 2 root winbindd_priv 40 Jun 7 10:18 winbindd_privileged drwxr-x--- 2 root winbindd_priv 4.0K Jun 8 13:36 winbindd_privileged ### Configuration files /etc/krb5.conf =========== [libdefaults] default_realm = ADLAB.LOCAL ticket_lifetime = 24000 default_tgs_entypes = rc4-hmac des-cbc-md5 default_tkt__enctypes = rc4-hmac des-cbc-md5 permitted_enctypes = rc4-hmac des-cbc-md5 dns_lookup_realm = true dns_lookup_kdc = true [realms] ADLAB.LOCAL = { kdc = dc01.adlab.local:88 kdc = dc02.adlab.local:88 admin_server = dc01.adlab.local #:749 default_domain = adlab.local } [domain_realm] .adlab.local = ADLAB.LOCAL adlab.local = ADLAB.LOCAL [appdefaults] pam = { debug = false ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log =========== /etc/nsswitch.conf =========== passwd: compat winbind group: compat winbind shadow: compat winbind gshadow: files hosts: files dns networks: files protocols: db files winbind services: db files winbind ethers: db files rpc: db files netgroup: nis winbind =========== /etc/samba.smb.conf =========== [global] netbios name = lnx1604vmlab01 workgroup = ADLAB security = ADS realm = ADLAB.LOCAL encrypt passwords = yes idmap config *:backend = rid idmap config *:range = 5000-100000 idmap cache time = 300 winbind cache time = 300 winbind trusted domains only = no winbind use default domain = yes winbind enum users = yes winbind enum groups = yes winbind refresh tickets = yes template shell = /bin/false load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes [homes] comment = Home Directories browseable = no writable = yes ============ /etc/freeradius/mods-enabled/mschap ============ mschap { winbind_username = "%{mschap:User-Name}" winbind_domain = "ADLAB" pool { start = ${thread[pool].start_servers} min = ${thread[pool].min_spare_servers} max = ${thread[pool].max_servers} spare = ${thread[pool].max_spare_servers} uses = 0 retry_delay = 30 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 } passchange { } } ============ ## freeradius -X ============ =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.06.08 13:03:58 =~=~=~=~=~=~=~=~=~=~=~= free radius -X Server was built with: accounting : yes authentication : yes ascend-binary-attributes : yes coa : yes control-socket : yes detail : yes dhcp : yes dynamic-clients : yes osfc2 : no proxy : yes regex-pcre : no regex-posix : yes regex-posix-extended : yes session-management : yes stats : yes tcp : yes threads : yes tls : yes unlang : yes vmps : yes developer : no Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.2g release Endianness: little Compilation flags: cppflags : -Wdate-time -D_FORTIFY_SOURCE=2 cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11 -I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread -lreadline Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/sradutmp including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/DGP main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client firewall.adlab.local { ipaddr = firewall.adlab.local IPv4 address [172.16.250.2] require_message_authenticator = no secret = <<< secret >>> shortname = "Firewall" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client Cisco_SMB_APs { ipaddr = 10.0.0.0/29 require_message_authenticator = no secret = <<< secret >>> shortname = "Cisco_Access_Points" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } [1mDebugger not attached [0m # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [1m [33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [0m [1m [33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". [0m # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } [1mrlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending slots used [0m [1mrlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending slots used [0m [1mrlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending slots used [0m [1mrlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending slots used [0m [1mrlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending slots used [0m rlm_mschap (mschap): authenticating directly to winbind # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server DGP { # from file /etc/freeradius/sites-enabled/DGP # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading post-proxy {...} # Loading post-auth {...} } # server DGP radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server DGP Listening on proxy address * port 49232 [1mReady to process requests [0m (0) Received Access-Request Id 78 from 172.16.250.2:1051 to 172.16.13.30:1812 length 161 (0) User-Name = "aduserx" (0) NAS-IP-Address = 0.0.0.0 (0) NAS-Port = 0 (0) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (0) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000e016a7a75726272756767 (0) Message-Authenticator = 0xe49c7d30c87d3a085600a4624bb77d4a (0) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [mschap] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (0) ntdomain: No such realm "NULL" (0) [ntdomain] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/DGP (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0x0c948df90c95944a (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/DGP (0) Sent Access-Challenge Id 78 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (0) EAP-Message = 0x010100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x0c948df90c95944ac55dada148fa7051 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 79 from 172.16.250.2:1051 to 172.16.13.30:1812 length 333 (1) User-Name = "aduserx" (1) NAS-IP-Address = 0.0.0.0 (1) NAS-Port = 0 (1) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (1) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020100a819800000009e1603010099010000950303cc3f208cada8a1f17e9e1d9e7f42efade37f8b478c738e495d9beaeeea6fd52900003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff010000 (1) State = 0x0c948df90c95944ac55dada148fa7051 (1) Message-Authenticator = 0xe63d32498949d51cd56ce158e3cebc53 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [mschap] = noop (1) ntdomain: Checking for prefix before "\" (1) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (1) ntdomain: No such realm "NULL" (1) [ntdomain] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 168 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/DGP (1) authenticate { (1) eap: Expiring EAP session with state 0x0c948df90c95944a (1) eap: Finished EAP session with state 0x0c948df90c95944a (1) eap: Previous EAP request found for state 0x0c948df90c95944a, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 158 bytes (1) eap_peap: Got complete TLS record (158 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.2 [length 0099] (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.2 [length 0059] (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.2 [length 08d3] (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: unknown state (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: TLS_accept: Need to read more data: unknown state (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1004 (1) eap: EAP session adding &reply:State = 0x0c948df90d96944a (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/DGP (1) Sent Access-Challenge Id 79 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (1) EAP-Message = 0x010203ec19c000000a9116030300590200005503032b3102ca557a84a026f8b44661dc9a6945f159702d4c3778feedd6e3def69c1b202b38a0f48cccd902c2478e14eb6a8ea7a71e062dc5ad73f4f58ab10c6fd774e1c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x0c948df90d96944ac55dada148fa7051 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 80 from 172.16.250.2:1051 to 172.16.13.30:1812 length 171 (2) User-Name = "aduserx" (2) NAS-IP-Address = 0.0.0.0 (2) NAS-Port = 0 (2) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (2) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200061900 (2) State = 0x0c948df90d96944ac55dada148fa7051 (2) Message-Authenticator = 0x3788c6cbdee3bb5fd6703bae1de25f28 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [mschap] = noop (2) ntdomain: Checking for prefix before "\" (2) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (2) ntdomain: No such realm "NULL" (2) [ntdomain] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/DGP (2) authenticate { (2) eap: Expiring EAP session with state 0x0c948df90d96944a (2) eap: Finished EAP session with state 0x0c948df90d96944a (2) eap: Previous EAP request found for state 0x0c948df90d96944a, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1000 (2) eap: EAP session adding &reply:State = 0x0c948df90e97944a (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/DGP (2) Sent Access-Challenge Id 80 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (2) EAP-Message = 0x010303e81940f7a2d08dc361397f488f4951e6cce8d05097282d76dbc234e99e3dbdd833615a88381ef0c4ee42234e370ea9276272ef54c442fc912a52acd7bb3f0aafb9fe6bf97ae2f72135c9d718e1feec6cafe27b650372f735b78a991053addf073ce29587b5541b6c4a338b060004e8308204e430 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x0c948df90e97944ac55dada148fa7051 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 81 from 172.16.250.2:1051 to 172.16.13.30:1812 length 171 (3) User-Name = "aduserx" (3) NAS-IP-Address = 0.0.0.0 (3) NAS-Port = 0 (3) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (3) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x020300061900 (3) State = 0x0c948df90e97944ac55dada148fa7051 (3) Message-Authenticator = 0x6290667e32b39cfbd59fe58122d8ff91 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [mschap] = noop (3) ntdomain: Checking for prefix before "\" (3) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (3) ntdomain: No such realm "NULL" (3) [ntdomain] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/DGP (3) authenticate { (3) eap: Expiring EAP session with state 0x0c948df90e97944a (3) eap: Finished EAP session with state 0x0c948df90e97944a (3) eap: Previous EAP request found for state 0x0c948df90e97944a, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 723 (3) eap: EAP session adding &reply:State = 0x0c948df90f90944a (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/DGP (3) Sent Access-Challenge Id 81 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (3) EAP-Message = 0x010402d3190020417574686f7269747982090085d1953cb7da2d06300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x0c948df90f90944ac55dada148fa7051 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 82 from 172.16.250.2:1051 to 172.16.13.30:1812 length 301 (4) User-Name = "aduserx" (4) NAS-IP-Address = 0.0.0.0 (4) NAS-Port = 0 (4) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (4) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x0204008819800000007e16030300461000004241042f6fa8e77d969dd0875e49f54f38d23517adea74715c1de8c7b0417a69fee840621f4b7637b5728d86d89fab8a4a601128397b8f374397420d8e1a4e83966f781403030001011603030028000000000000000081e7bd4d2f233991ed030e9ae59cda (4) State = 0x0c948df90f90944ac55dada148fa7051 (4) Message-Authenticator = 0xbeca29bafaaa9ff462228b6f12c4ac93 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [mschap] = noop (4) ntdomain: Checking for prefix before "\" (4) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (4) ntdomain: No such realm "NULL" (4) [ntdomain] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/DGP (4) authenticate { (4) eap: Expiring EAP session with state 0x0c948df90f90944a (4) eap: Finished EAP session with state 0x0c948df90f90944a (4) eap: Previous EAP request found for state 0x0c948df90f90944a, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: unknown state (4) eap_peap: TLS_accept: unknown state (4) eap_peap: <<< recv TLS 1.2 [length 0001] (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: unknown state (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: unknown state (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: unknown state (4) eap_peap: TLS_accept: unknown state (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 57 (4) eap: EAP session adding &reply:State = 0x0c948df90891944a (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/DGP (4) Sent Access-Challenge Id 82 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (4) EAP-Message = 0x01050039190014030300010116030300286a7712bfdeca45ee4d230c3b58490fa802e10f1bd31554d6333c5dda7197474e0011cc221d32e978 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x0c948df90891944ac55dada148fa7051 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 83 from 172.16.250.2:1051 to 172.16.13.30:1812 length 171 (5) User-Name = "aduserx" (5) NAS-IP-Address = 0.0.0.0 (5) NAS-Port = 0 (5) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (5) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020500061900 (5) State = 0x0c948df90891944ac55dada148fa7051 (5) Message-Authenticator = 0xb64bd8e270cafc84d8347ce856f2d98d (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [mschap] = noop (5) ntdomain: Checking for prefix before "\" (5) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (5) ntdomain: No such realm "NULL" (5) [ntdomain] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/DGP (5) authenticate { (5) eap: Expiring EAP session with state 0x0c948df90891944a (5) eap: Finished EAP session with state 0x0c948df90891944a (5) eap: Previous EAP request found for state 0x0c948df90891944a, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 6 length 40 (5) eap: EAP session adding &reply:State = 0x0c948df90992944a (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/sites-enabled/DGP (5) Sent Access-Challenge Id 83 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (5) EAP-Message = 0x010600281900170303001d6a7712bfdeca45ef8ddcaf5c6cb51a6223000f64d52c936efe5896b5ac (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x0c948df90992944ac55dada148fa7051 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 84 from 172.16.250.2:1051 to 172.16.13.30:1812 length 210 (6) User-Name = "aduserx" (6) NAS-IP-Address = 0.0.0.0 (6) NAS-Port = 0 (6) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (6) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x0206002d1900170303002200000000000000015c51bc5a9da44139c7c4399f6ef15874a9b312f049a986285a0f (6) State = 0x0c948df90992944ac55dada148fa7051 (6) Message-Authenticator = 0xd2e3c281f9cc097b89e762cfd918a2a4 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [mschap] = noop (6) ntdomain: Checking for prefix before "\" (6) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (6) ntdomain: No such realm "NULL" (6) [ntdomain] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 45 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/DGP (6) authenticate { (6) eap: Expiring EAP session with state 0x0c948df90992944a (6) eap: Finished EAP session with state 0x0c948df90992944a (6) eap: Previous EAP request found for state 0x0c948df90992944a, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - aduserx (6) eap_peap: Got inner identity 'aduserx' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0206000e016a7a75726272756767 (6) eap_peap: Setting User-Name to aduserx (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0206000e016a7a75726272756767 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "aduserx" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0206000e016a7a75726272756767 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "aduserx" [1m [33m(6) WARNING: Outer and inner identities are the same. User privacy is compromised. [0m (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 14 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 43 (6) eap: EAP session adding &reply:State = 0xfaf66012faf17ad8 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xfaf66012faf17ad8ec30d73ab14f50bf (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 74 (6) eap: EAP session adding &reply:State = 0x0c948df90a93944a (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/DGP (6) Sent Access-Challenge Id 84 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (6) EAP-Message = 0x0107004a1900170303003f6a7712bfdeca45f0a86e54abd9d1fbc4804499a967fc1a0ad5e739765ddebbcd4300373fb09136def0c3cc710fd4e812c06be39efd399c8d3e5f60c795bcbb (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x0c948df90a93944ac55dada148fa7051 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 85 from 172.16.250.2:1051 to 172.16.13.30:1812 length 264 (7) User-Name = "aduserx" (7) NAS-IP-Address = 0.0.0.0 (7) NAS-Port = 0 (7) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (7) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x02070063190017030300580000000000000002df32fe53d078e81d8d34c797d011033b1e919325d9f7f7e82de5f1749629e3f56203c036ac35923940832ac0184402009bffddc029c9fe958a1767ddd235538a9942068710d06186584e77755bdd3a8e (7) State = 0x0c948df90a93944ac55dada148fa7051 (7) Message-Authenticator = 0x992ef68bda045a661a0b6539dde2f45d (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [mschap] = noop (7) ntdomain: Checking for prefix before "\" (7) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (7) ntdomain: No such realm "NULL" (7) [ntdomain] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 99 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/DGP (7) authenticate { (7) eap: Expiring EAP session with state 0xfaf66012faf17ad8 (7) eap: Finished EAP session with state 0x0c948df90a93944a (7) eap: Previous EAP request found for state 0x0c948df90a93944a, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767 (7) eap_peap: Setting User-Name to aduserx (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "aduserx" (7) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "aduserx" (7) State = 0xfaf66012faf17ad8ec30d73ab14f50bf [1m [33m(7) WARNING: Outer and inner identities are the same. User privacy is compromised. [0m (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 68 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xfaf66012faf17ad8 (7) eap: Finished EAP session with state 0xfaf66012faf17ad8 (7) eap: Previous EAP request found for state 0xfaf66012faf17ad8, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) eap_mschapv2: Auth-Type MS-CHAP { (7) mschap: Creating challenge hash with username: aduserx (7) mschap: Client is using MS-CHAPv2 (7) mschap: EXPAND %{mschap:User-Name} (7) mschap: --> aduserx rlm_mschap (mschap): Reserved connection (0) (7) mschap: sending authentication request user='aduserx' domain='ADLAB' rlm_mschap (mschap): Released connection (0) [1mrlm_mschap (mschap): Need 5 more connections to reach 10 spares [0m [1mrlm_mschap (mschap): Opening additional connection (5), 1 of 27 pending slots used [0m (7) mschap: Authenticated successfully (7) mschap: Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # Auth-Type MS-CHAP = ok (7) MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 8 length 51 (7) eap: EAP session adding &reply:State = 0xfaf66012fbfe7ad8 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 8 length 82 (7) eap: EAP session adding &reply:State = 0x0c948df90b9c944a (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/sites-enabled/DGP (7) Sent Access-Challenge Id 85 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (7) EAP-Message = 0x01080052190017030300476a7712bfdeca45f19f342212f694d45b80b896ebcee771ec397d2100a4b87cdc272b7d8291b15696c8e4aeac54d7868b4752ad6fc28d46ea667bbd56ce60f885c15eba442a7ac2 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x0c948df90b9c944ac55dada148fa7051 (7) Finished request Waking up in 2.3 seconds. (8) Received Access-Request Id 86 from 172.16.250.2:1051 to 172.16.13.30:1812 length 202 (8) User-Name = "aduserx" (8) NAS-IP-Address = 0.0.0.0 (8) NAS-Port = 0 (8) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (8) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) EAP-Message = 0x020800251900170303001a00000000000000032080d584931d77e66c978187280b44621b13 (8) State = 0x0c948df90b9c944ac55dada148fa7051 (8) Message-Authenticator = 0xf939bd03176eb4be05b4e654f7fabdad (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [mschap] = noop (8) ntdomain: Checking for prefix before "\" (8) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (8) ntdomain: No such realm "NULL" (8) [ntdomain] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 37 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/DGP (8) authenticate { (8) eap: Expiring EAP session with state 0xfaf66012fbfe7ad8 (8) eap: Finished EAP session with state 0x0c948df90b9c944a (8) eap: Previous EAP request found for state 0x0c948df90b9c944a, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020800061a03 (8) eap_peap: Setting User-Name to aduserx (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020800061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "aduserx" (8) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020800061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "aduserx" (8) State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf [1m [33m(8) WARNING: Outer and inner identities are the same. User privacy is compromised. [0m (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xfaf66012fbfe7ad8 (8) eap: Finished EAP session with state 0xfaf66012fbfe7ad8 (8) eap: Previous EAP request found for state 0xfaf66012fbfe7ad8, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 8 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7 (8) MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c (8) EAP-Message = 0x03080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "aduserx" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7 (8) eap_peap: MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c (8) eap_peap: EAP-Message = 0x03080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "aduserx" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7 (8) eap_peap: MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c (8) eap_peap: EAP-Message = 0x03080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "aduserx" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: Sending EAP Request (code 1) ID 9 length 46 (8) eap: EAP session adding &reply:State = 0x0c948df9049d944a (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/sites-enabled/DGP (8) Sent Access-Challenge Id 86 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (8) EAP-Message = 0x0109002e190017030300236a7712bfdeca45f21f0f88d38fff6f02e0e3463cab4d2ea732132901688365cc60074c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x0c948df9049d944ac55dada148fa7051 (8) Finished request Waking up in 2.3 seconds. (9) Received Access-Request Id 87 from 172.16.250.2:1051 to 172.16.13.30:1812 length 211 (9) User-Name = "aduserx" (9) NAS-IP-Address = 0.0.0.0 (9) NAS-Port = 0 (9) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen" (9) Calling-Station-Id = "8C-3A-E3-5D-9E-30" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Connect-Info = "CONNECT 11Mbps 802.11b" (9) EAP-Message = 0x0209002e1900170303002300000000000000049dc53b0eba69379fa5cfa3ea8ce4c76f5cba1718003ce22872b166 (9) State = 0x0c948df9049d944ac55dada148fa7051 (9) Message-Authenticator = 0xf70416c4d3260d2e40d7be72eb8de636 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [mschap] = noop (9) ntdomain: Checking for prefix before "\" (9) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL (9) ntdomain: No such realm "NULL" (9) [ntdomain] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "aduserx", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 9 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/sites-enabled/DGP (9) authenticate { (9) eap: Expiring EAP session with state 0x0c948df9049d944a (9) eap: Finished EAP session with state 0x0c948df9049d944a (9) eap: Previous EAP request found for state 0x0c948df9049d944a, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap_peap: No information to cache: session caching will be disabled for session 2b38a0f48cccd902c2478e14eb6a8ea7a71e062dc5ad73f4f58ab10c6fd774e1 (9) eap: Sending EAP Success (code 3) ID 9 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/freeradius/sites-enabled/DGP (9) post-auth { (9) if (NAS-Port-Type == Wireless-802.11) { (9) if (NAS-Port-Type == Wireless-802.11) -> TRUE (9) if (NAS-Port-Type == Wireless-802.11) { (9) if (User-Name !~ /ADLAB\\\\/i) { (9) if (User-Name !~ /ADLAB\\\\/i) -> TRUE (9) if (User-Name !~ /ADLAB\\\\/i) { (9) update request { (9) EXPAND ADLAB\\%{User-Name} (9) --> ADLAB\\aduserx (9) User-Name := ADLAB\aduserx (9) } # update request = noop (9) } # if (User-Name !~ /ADLAB\\\\/i) = noop (9) if ((Group == "ADLAB\\\\fw-wifi-access") ) { (9) Failed resolving GID: No error (9) if ((Group == "ADLAB\\\\fw-wifi-access") ) -> FALSE (9) if ((Group == "ADLAB\\fw-wifi-access") ) { (9) if ((Group == "ADLAB\\fw-wifi-access") ) -> FALSE (9) if ((Group == "fw-wifi-access") ) { (9) if ((Group == "fw-wifi-access") ) -> FALSE (9) else { (9) update reply { (9) EXPAND %{Stripped-User-Name} (9) --> (9) User-Name := (9) Firewall-Group-Name := "WIFI-INVALIDO" (9) } # update reply = noop (9) } # else = noop (9) } # if (NAS-Port-Type == Wireless-802.11) = noop (9) ... skipping else for request 9: Preceding "if" was taken (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) [exec] = noop (9) } # post-auth = noop (9) Sent Access-Accept Id 87 from 172.16.13.30:1812 to 172.16.250.2:1051 length 0 (9) MS-MPPE-Recv-Key = 0x5ea4ab1003841b5a54f60da514ef021057ace23855ec69f2cd350bc31bad55d8 (9) MS-MPPE-Send-Key = 0x3689fab4c80c052d54b5bade017dc795debb8bef460b19373a6609bd297d36bd (9) EAP-Message = 0x03090004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name := "" (9) Firewall-Group-Name := "WIFI-INVALIDO" (9) Finished request Waking up in 2.3 seconds. (0) Cleaning up request packet ID 78 with timestamp +19 (1) Cleaning up request packet ID 79 with timestamp +19 (2) Cleaning up request packet ID 80 with timestamp +20 (3) Cleaning up request packet ID 81 with timestamp +20 (4) Cleaning up request packet ID 82 with timestamp +20 (5) Cleaning up request packet ID 83 with timestamp +20 (6) Cleaning up request packet ID 84 with timestamp +20 Waking up in 2.5 seconds. (7) Cleaning up request packet ID 85 with timestamp +20 (8) Cleaning up request packet ID 86 with timestamp +22 (9) Cleaning up request packet ID 87 with timestamp +22 [1mReady to process requests [0m ^C ]0;root@lnx1604dgpradius02: /etc/freeradius root@lnx1604dgpradius02:/etc/freeradius# ============ winbindd -SFd5 ============ =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.06.08 13:04:23 =~=~=~=~=~=~=~=~=~=~=~= [ 2976]: request interface version (version = 27) [ 2976]: request location of privileged pipe getgroups freerad child daemon request 59 ads: fetch sequence_number for ADLAB ads_do_paged_search_args: ldap_search_with_timeout((objectclass=*)) -> Time limit exceeded Reducing LDAP page size from 500 to 250 due to IO_TIMEOUT Reopening ads connection to realm 'ADLAB.LOCAL' after error Time limit exceeded sitename_fetch: Returning sitename for ADLAB.local: "ADLAB" ads_dc_name: domain=ADLAB sitename_fetch: Returning sitename for ADLAB.local: "ADLAB" saf_fetch: failed to find server for "ADLAB.local" domain get_dc_list: preferred server list: ", *" no entry for ADLAB.local#1C found. resolve_ads: Attempting to resolve DCs for ADLAB.local using DNS ads_dns_lookup_srv: 2 records returned in the answer section. namecache_store: storing 2 addresses for ADLAB.local#1c: 172.16.14.5,172.16.14.3 get_dc_list: returning 2 ip addresses in an ordered list get_dc_list: 172.16.14.5:389 172.16.14.3:389 ads_try_connect: sending CLDAP request to 172.16.14.5 (realm: ADLAB.local) Successfully contacted LDAP server 172.16.14.5 sitename_fetch: Returning sitename for ADLAB.local: "ADLAB" saf_fetch: failed to find server for "ADLAB.local" domain get_dc_list: preferred server list: ", *" resolve_ads: Attempting to resolve KDCs for ADLAB.local using DNS ads_dns_lookup_srv: 2 records returned in the answer section. get_dc_list: returning 2 ip addresses in an ordered list get_dc_list: 172.16.14.5:88 172.16.14.3:88 saf_fetch: failed to find server for "ADLAB.local" domain get_dc_list: preferred server list: ", *" resolve_ads: Attempting to resolve KDCs for ADLAB.local using DNS ads_dns_lookup_srv: 3 records returned in the answer section. get_dc_list: returning 3 ip addresses in an ordered list get_dc_list: 172.20.0.5:88 172.16.14.3:88 172.16.14.5:88 create_local_private_krb5_conf_for_domain: wrote file /var/run/samba/smb_krb5/krb5.conf.ADLAB with realm ADLAB.LOCAL KDC list = kdc = 172.16.14.5 kdc = 172.16.14.3 kdc = 172.20.0.5 ads_dc_name: using server='ADLAB.LOCAL' IP=172.16.14.5 ads_try_connect: sending CLDAP request to 172.16.14.5 (realm: ADLAB.local) Successfully contacted LDAP server 172.16.14.5 Connected to LDAP server ADLAB.LOCAL KDC time offset is 0 seconds Found SASL mechanism GSS-SPNEGO ads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2 ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2 ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2.3 ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10 Starting GENSEC mechanism spnego Starting GENSEC submechanism gse_krb5 Search for filter: (objectclass=*), base: gave 1 replies msrpc_name_to_sid: name=ADLAB\FREERAD name_to_sid [rpc] ADLAB\FREERAD for domain ADLAB rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 160 rpc_read_send: data_to_read: 176 Finished processing child request 59 Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED #### Freeradiux - X was already called, now a user will try to log on via WIFI [ 2976]: request interface version (version = 27) [ 2976]: request location of privileged pipe [ 2976]: pam auth crap domain: [ADLAB] user: aduserx child daemon request 14 [ 2931]: pam auth crap domain: ADLAB user: aduserx rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 400 rpc_read_send: data_to_read: 656 NTLM CRAP authentication for user [ADLAB]\[aduserx] returned NT_STATUS_OK Finished processing child request 14 getpwnam ADLAB\aduserx child daemon request 59 msrpc_name_to_sid: name=ADLAB\aduserx name_to_sid [rpc] ADLAB\aduserx for domain ADLAB rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 160 rpc_read_send: data_to_read: 208 Finished processing child request 59 child daemon request 59 ads: query_user query_user: Cache lookup succeeded for S-1-5-21-297524306-2253920702-176340032-2428 Finished processing child request 59 child daemon request 59 rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 144 rpc_read_send: data_to_read: 208 Finished processing child request 59 child daemon request 59 Finished processing child request 59 child daemon request 59 msrpc_sid_to_name: S-1-5-21-297524306-2253920702-176340032-513 for domain ADLAB rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 144 rpc_read_send: data_to_read: 224 Mapped sid to [ADLAB]\[Domain Users] Finished processing child request 59 child daemon request 59 rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 144 rpc_read_send: data_to_read: 224 Finished processing child request 59 child daemon request 59 Finished processing child request 59 getgrnam ADLAB\\fw-wifi-access child daemon request 59 msrpc_name_to_sid: name=ADLAB\\FW-WIFI-ACCESS name_to_sid [rpc] ADLAB\\FW-WIFI-ACCESS for domain ADLAB rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 176 rpc_read_send: data_to_read: 176 Finished processing child request 59 Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED getpwnam ADLAB\aduserx getgrnam ADLAB\fw-wifi-access child daemon request 59 msrpc_name_to_sid: name=ADLAB\FW-WIFI-ACCESS name_to_sid [rpc] ADLAB\FW-WIFI-ACCESS for domain ADLAB rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 176 rpc_read_send: data_to_read: 208 Finished processing child request 59 child daemon request 59 Finished processing child request 59 child daemon request 59 rpc_api_pipe: host ADLAB.LOCAL rpc_write_send: data_to_write: 144 rpc_read_send: data_to_read: 224 Finished processing child request 59 child daemon request 59 Finished processing child request 59 getpwnam ADLAB\aduserx getgrnam fw-wifi-access ^CGot sig[2] terminate (is_parent=0) Got sig[2] terminate (is_parent=0) Got sig[2] terminate (is_parent=0) Got sig[2] terminate (is_parent=0) Got sig[2] terminate (is_parent=1) check lock order 2 for /var/run/samba/serverid.tdb release lock order 2 for /var/run/samba/serverid.tdb ]0;root@lnx1604dgpradius02: /home/ADLAB root@lnx1604dgpradius02:/home/ADLAB# ============

2 4

Using rest in post-auth
by Pshem Kowalczyk 13 Jun '16

13 Jun '16

Hi, This is more a philosophical question then a practical one, as our current setup works for us. We run a 'frontend' server that proxies requests to a number of backends, those backends reply with a number of attributes that define the service. We check the attributes to make sure they form a logical setup. One of those checks is quite convoluted and we've resorted to turning it into a REST call. Since the rlm_rest doesn't support post-proxy we make that call in post-auth. We only reject a session in unusual circumstances (generally we modify the attributes and admit the session, or drop it into a "walled-garden" setup), so every time we send a reject - we update Reply-Message that we log using linelog in "Post-Auth-Type Reject". That makes it easy to troubleshoot. Now, with the rlm_rest module as far a we can tell there is no way to reject a session and update the Reply-Message in one go. Even if we return 'Auth-Type := Reject' the session still get's admitted, if the code is 401 - then the session is rejected, but the body is not parsed (as per the docs). For now we've settled on an internal attribute that signals that the session should be rejected, and we return it from REST (together with the Reply-Message), and later look for it to change Auth-Type to Reject. I was wondering if there is any simpler way of doing it. kind regards Pshem

2 3

EAP-TLS and Windows 10 fails for wireless
by Lucile Quirion 12 Jun '16

12 Jun '16

Hello everyone, I'm setting up a RADIUS server, and I've run into some trouble to authenticate a Windows 10 laptop via wireless. I got no reply to the 5th "Access-Challenge". I'm running freeradius-server 3.0.11 with customized demo certificates: I've integrated the certificate configuration changes from the branch 3.1.x, and also created a unencrypted key (.p12) for my Windows client. I've installed the root CA certificate (.der) and the client key (.p12) into the User's certificate store on the Windows client. During my troubleshooting, I've searched for other error reports for EAP-TLS & Windows: * TLS version compatibility -> I've forced Windows to use TLS 1.2 (add DWORD TlsVersion register) (unnecessary but done). * 802.11 version compatibility -> I've tried both 802.11a+g mode and 802.11b+g+n mode on the access point. I've also noted that the Windows 10 laptop can connect when wireless encryption is disabled. * server certificate requirements -> Windows successfully authenticates in PEAP mode with the dummy "bob" user when "Verify server certificate" is checked in EAP-TLS parameters * root CA certificate requirements * user certificate requirement * user key requirement (no encryption) -> Windows successfully authenticate in EAP-TLS mode on the wired connection. So all certificates are correctly installed, and Windows can use the client's cert/key to authenticate. I've tried to get some debugging info with the command: netsh wlan set tra yes netsh ras set tr * en <connection attempt> netsh ras set tr * dis netsh wlan set tra no However I got a handful of files, which ones are relevant ? The only advice I got from them is to check TLS and 802.11 compatibility. Could someone kindly advise me to the next point ? Has anyone run into a similar problem ? Following is the failing connection log from freeradius-server: # radiusd -X [...] Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.1j release pcre : 8.11 2010-12-10 [...] tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius2/certs" pem_file_type = yes private_key_file = "/etc/freeradius2/certs/server.key" certificate_file = "/etc/freeradius2/certs/server.pem" ca_file = "/etc/freeradius2/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius2/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } [...] (33) Received Access-Request Id 42 from 10.1.1.2:32962 to 10.255.255.251:1812 length 163 (33) User-Name = "eloi" (33) Called-Station-Id = "06-F0-21-11-27-D1:acksys" (33) NAS-Port-Type = Wireless-802.11 (33) NAS-Port = 1 (33) Calling-Station-Id = "24-77-03-1F-B6-78" (33) Connect-Info = "CONNECT 54Mbps 802.11a" (33) Acct-Session-Id = "5415B2E9-00000003" (33) Framed-MTU = 1400 [...] (33) eap: Peer sent packet with method EAP Identity (1) (33) eap: Calling submodule eap_tls to process data (33) eap_tls: Initiating new EAP-TLS session (33) eap_tls: Setting verify mode to require certificate from client (33) eap_tls: [eaptls start] = request (33) eap: Sending EAP Request (code 1) ID 151 length 6 (33) eap: EAP session adding &reply:State = 0xe01d52c2e08a5f27 [...] (34) Received Access-Request Id 43 from 10.1.1.2:32962 to 10.255.255.251:1812 length 350 [...] (34) eap: Peer sent EAP Response (code 2) ID 151 length 178 [...] (34) eap: Peer sent packet with method EAP TLS (13) (34) eap: Calling submodule eap_tls to process data (34) eap_tls: Continuing EAP-TLS (34) eap_tls: Peer indicated complete TLS record size will be 168 bytes (34) eap_tls: Got complete TLS record (168 bytes) (34) eap_tls: [eaptls verify] = length included (34) eap_tls: (other): before/accept initialization (34) eap_tls: TLS_accept: before/accept initialization (34) eap_tls: <<< recv TLS 1.2 [length 00a3] (34) eap_tls: TLS_accept: SSLv3 read client hello A (34) eap_tls: >>> send TLS 1.2 [length 0051] (34) eap_tls: TLS_accept: SSLv3 write server hello A (34) eap_tls: >>> send TLS 1.2 [length 08d9] (34) eap_tls: TLS_accept: SSLv3 write certificate A (34) eap_tls: >>> send TLS 1.2 [length 030f] (34) eap_tls: TLS_accept: SSLv3 write key exchange A (34) eap_tls: >>> send TLS 1.2 [length 00ba] (34) eap_tls: TLS_accept: SSLv3 write certificate request A (34) eap_tls: TLS_accept: SSLv3 flush data (34) eap_tls: TLS_accept: Need to read more data: SSLv3 read client certificate A (34) eap_tls: TLS_accept: Need to read more data: SSLv3 read client certificate A (34) eap_tls: In SSL Handshake Phase (34) eap_tls: In SSL Accept mode (34) eap_tls: [eaptls process] = handled (34) eap: Sending EAP Request (code 1) ID 152 length 1014 (34) eap: EAP session adding &reply:State = 0xe01d52c2e1855f27 [...] (34) Sent Access-Challenge Id 43 from 10.255.255.251:1812 to 10.1.1.2:32962 length 0 [...] (35) Received Access-Request Id 44 from 10.1.1.2:32962 to 10.255.255.251:1812 length 178 [...] (36) Received Access-Request Id 45 from 10.1.1.2:32962 to 10.255.255.251:1812 length 178 [...] (37) Received Access-Request Id 46 from 10.1.1.2:32962 to 10.255.255.251:1812 length 178 [...] (38) Received Access-Request Id 0 from 10.1.1.2:41720 to 10.255.255.251:1812 length 163 [...] (39) Received Access-Request Id 1 from 10.1.1.2:41720 to 10.255.255.251:1812 length 350 [...] (39) eap: Expiring EAP session with state 0xe01d52c2e4865f27 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! EAP session with state 0xe01d52c2e4865f27 did not finish! !! !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -- Lucile Quirion Consultante en logiciels libres Savoir-faire Linux Tel: + 1 (514) 276 5468, ext. 312

5 8

compiling pam_radius_auth on AIX 6.1
by Manoj Rajkarnikar 12 Jun '16

12 Jun '16

Dear All, I'm trying to compile pam_radius client on AIX 6.1. Autoconf does not complain about anything but make gives below error. below is my env and the error I'm getting. bash-4.2# make --version GNU Make 3.80 Copyright (C) 2002 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. bash-4.2# cc --version cc (GCC) 4.2.0 Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. bash-4.2# make make[1]: Entering directory `/manoj/pam_radius-master/src' cc -Wall -fPIC -c pam_radius_auth.c -o pam_radius_auth.o pam_radius_auth.c:1073: error: conflicting types for 'pam_sm_authenticate' /usr/include/security/pam_modules.h:40: error: previous declaration of 'pam_sm_authenticate' was here pam_radius_auth.c:1296: error: conflicting types for 'pam_sm_setcred' /usr/include/security/pam_modules.h:47: error: previous declaration of 'pam_sm_setcred' was here pam_radius_auth.c:1391: error: conflicting types for 'pam_sm_open_session' /usr/include/security/pam_modules.h:61: error: previous declaration of 'pam_sm_open_session' was here pam_radius_auth.c:1396: error: conflicting types for 'pam_sm_close_session' /usr/include/security/pam_modules.h:68: error: previous declaration of 'pam_sm_close_session' was here pam_radius_auth.c:1405: error: conflicting types for 'pam_sm_chauthtok' /usr/include/security/pam_modules.h:92: error: previous declaration of 'pam_sm_chauthtok' was here pam_radius_auth.c:1631: error: conflicting types for 'pam_sm_acct_mgmt' /usr/include/security/pam_modules.h:54: error: previous declaration of 'pam_sm_acct_mgmt' was here make[1]: *** [pam_radius_auth.o] Error 1 make[1]: Leaving directory `/manoj/pam_radius-master/src' make: *** [src/pam_radius_auth.o] Error 2 Thanks alot. Manoj.

3 2

MSCHAP not working after weekly restart
by Enrico Polesel 12 Jun '16

12 Jun '16

Hello everyone, we have a ubuntu 14.04 with freeradius 2.1.12+dfsg-1.2ubuntu8.1 configured to use Active Directory to do authentication (using winbind and ntlm_auth), eap, pap and mschap. Weekly the freeradius is restarted (with a signal HUP) by logrotate and usually it works fine. But sometimes MSCHAP authentication stop working after the restart (both plain with radtest and with PEAP from wireless client) while PAP continues working. We can detect the problem running `radtest -t pap ...` (it works) and `radtest -t mschap ...` (it doesn't). The response we get is: > rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=204, length=38 MS-CHAP-Error = "\000E=691 R=1" and the log says: > Login incorrect (mschap: External script says ) Restarting the freeradius solves the problem (with service freeradius restart). I'm unable to reproduce it (it just happens sometimes, like once every two months) and I can't get a debug log with `freeradius -X` because restarting solves the problem. I've been able to log the parameters passed to the external program ntlm_auth that are: > --request-nt-key --username=someuser --challenge=00 --nt-response=00 --domain=OUR_DOMAIN the configuration is: > ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{reply:AD-Samaccountname} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00} --domain=OUR_DOMAIN" so I think that for some reason the mschap module brokes down and stops putting the right values in the dictionary. I noticed that this (for now) happened only with weekly logrotate restarts and not with manual restarts (when I update the configuration). Another thing I noticed is that it happens only at the primary radius server (~500k authentications every week, some local and some proxied) and not on the secondary (~40k authentications every week, basically just monitoring). The two radius server share the same configuration (as in "I copied the files") and software version. Any hint in how to debug it? (or resolve it) Thanks for reading my mail and for any help you could provide. Regards, Enrico Polesel

2 3