Hello,
I figured it out, the hint from Matthew did the trick.
Because of the wrong position of some lines in the configuration file,
radiusd searched for the wrong rlm*.so.
I altered the configuration to this, look at the line with "bob":
----------------------------------------------------------------------------------------------------
# -*- text -*-
##
## sql.conf -- SQL modules
##
## $Id: 4997a802dfd8660f622d06f577a787bf30895e3e $
######################################################################
#
# Configuration for the SQL module
#
# The database schemas and queries are located in subdirectories:
#
# sql/<DB>/main/schema.sql Schema
# sql/<DB>/main/queries.conf Authorisation and Accounting queries
#
# Where "DB" is mysql, mssql, oracle, or postgresql.
#
#
#
# Several drivers accept specific options, to set them a config section
# matching the name of the driver should be added to the sql instance.
#
# Driver specific options are:
#
#
# mysql {
# # If any of the below files are set tls encryption is enabled
# tls {
# ca_file = "/etc/ssl/certs/my_ca.crt"
# ca_path = "/etc/ssl/certs/"
# certificate_file = "/etc/ssl/certs/private/client.crt"
# private_key_file = "/etc/ssl/certs/private/client.key"
# cipher = "DHE-RSA-AES256-SHA:AES128-SHA"
# }
# }
bob {
filename = "/tmp/nope.txt"
}
sql {
sqlite {
# Path to the sqlite database
filename = "/tmp/database.db"
# If the file above does not exist and bootstrap is set
# a new database file will be created, and the SQL
statements
# contained within the file will be executed.
bootstrap =
"/etc/radiusd-acct/mods-config/sql/main/sqlite/schema.sql"
}
# The sub-module to use to execute queries. This should match
# the database you're attempting to connect to.
#
# * rlm_sql_mysql
# * rlm_sql_mssql
# * rlm_sql_oracle
# * rlm_sql_postgresql
# * rlm_sql_sqlite
# * rlm_sql_null (log queries to disk)
#
driver = "rlm_sql_sqlite"
# The dialect of SQL you want to use, this should usually match
# the driver you selected above.
#
# If you're using rlm_sql_null, then it should be the type of
# database the logged queries are going to be executed against.
dialect = "sqlite"
# Database table configuration for everything except Oracle
radius_db = "radius"
# If you want both stop and start records logged to the
# same SQL table, leave this as is. If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"
# Allow for storing data after authentication
postauth_table = "radpostauth"
# Tables containing 'check' items
authcheck_table = "radcheck"
groupcheck_table = "radgroupcheck"
# Tables containing 'reply' items
authreply_table = "radreply"
groupreply_table = "radgroupreply"
# Table to keep group info
usergroup_table = "radusergroup"
# If set to 'yes' (default) we read the group tables
# If set to 'no' the user MUST have Fall-Through = Yes in the
radreply table
read_groups = yes
# Remove stale session if checkrad does not see a double login
delete_stale_sessions = yes
# Write SQL queries to a logfile. This is potentially useful
for tracing
# issues with authorization queries.
# logfile = ${logdir}/sqllog.sql
# As of version 3.0, the "pool" section has replaced the
# following configuration items:
#
# num_sql_socks
# connect_failure_retry_delay
# lifetime
# max_queries
#
# The connection pool is new for 3.0, and will be used in many
# modules, for all kinds of connection-related activity.
#
pool {
# Number of connections to start
start = 5
# Minimum number of connections to keep open
min = 4
# Maximum number of connections
#
# If these connections are all in use and a new one
# is requested, the request will NOT get a connection.
max = 10
# Spare connections to be left idle
#
# NOTE: Idle connections WILL be closed if "idle_timeout"
# is set.
spare = 3
# Number of uses before the connection is closed
#
# 0 means "infinite"
uses = 0
# The lifetime (in seconds) of the connection
lifetime = 0
# idle timeout (in seconds). A connection which is
# unused for this length of time will be closed.
idle_timeout = 60
# NOTE: All configuration settings are enforced. If a
# connection is closed because of "idle_timeout",
# "uses", or "lifetime", then the total number of
# connections MAY fall below "min". When that
# happens, it will open a new connection. It will
# also log a WARNING message.
#
# The solution is to either lower the "min" connections,
# or increase lifetime/idle_timeout.
}
# Set to 'yes' to read radius clients from the database ('nas'
table)
# Clients will ONLY be read on server startup.
# read_clients = yes
# Table to keep radius client info
client_table = "nas"
# This entry should be used for the default instance (sql {})
# of the SQL module.
group_attribute = "SQL-Group"
# Read database-specific queries
$INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf
}
# -*- text -*-
##
## sql.conf -- SQL modules
##
## $Id: 4997a802dfd8660f622d06f577a787bf30895e3e $
######################################################################
#
# Configuration for the SQL module
#
# The database schemas and queries are located in subdirectories:
#
# sql/<DB>/main/schema.sql Schema
# sql/<DB>/main/queries.conf Authorisation and Accounting queries
#
# Where "DB" is mysql, mssql, oracle, or postgresql.
#
#
#
# Several drivers accept specific options, to set them a config section
# matching the name of the driver should be added to the sql instance.
#
# Driver specific options are:
#
#
# mysql {
# # If any of the below files are set tls encryption is enabled
# tls {
# ca_file = "/etc/ssl/certs/my_ca.crt"
# ca_path = "/etc/ssl/certs/"
# certificate_file = "/etc/ssl/certs/private/client.crt"
# private_key_file = "/etc/ssl/certs/private/client.key"
# cipher = "DHE-RSA-AES256-SHA:AES128-SHA"
# }
# }
bob {
filename = "/tmp/nope.txt"
}
sql {
sqlite {
# Path to the sqlite database
filename = "/tmp/database.db"
# If the file above does not exist and bootstrap is set
# a new database file will be created, and the SQL
statements
# contained within the file will be executed.
bootstrap =
"/etc/radiusd-acct/mods-config/sql/main/sqlite/schema.sql"
}
# The sub-module to use to execute queries. This should match
# the database you're attempting to connect to.
#
# * rlm_sql_mysql
# * rlm_sql_mssql
# * rlm_sql_oracle
# * rlm_sql_postgresql
# * rlm_sql_sqlite
# * rlm_sql_null (log queries to disk)
#
driver = "rlm_sql_sqlite"
# The dialect of SQL you want to use, this should usually match
# the driver you selected above.
#
# If you're using rlm_sql_null, then it should be the type of
# database the logged queries are going to be executed against.
dialect = "sqlite"
# Database table configuration for everything except Oracle
radius_db = "radius"
# If you want both stop and start records logged to the
# same SQL table, leave this as is. If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"
# Allow for storing data after authentication
postauth_table = "radpostauth"
# Tables containing 'check' items
authcheck_table = "radcheck"
groupcheck_table = "radgroupcheck"
# Tables containing 'reply' items
authreply_table = "radreply"
groupreply_table = "radgroupreply"
# Table to keep group info
usergroup_table = "radusergroup"
# If set to 'yes' (default) we read the group tables
# If set to 'no' the user MUST have Fall-Through = Yes in the
radreply table
read_groups = yes
# Remove stale session if checkrad does not see a double login
delete_stale_sessions = yes
# Write SQL queries to a logfile. This is potentially useful
for tracing
# issues with authorization queries.
# logfile = ${logdir}/sqllog.sql
# As of version 3.0, the "pool" section has replaced the
# following configuration items:
#
# num_sql_socks
# connect_failure_retry_delay
# lifetime
# max_queries
#
# The connection pool is new for 3.0, and will be used in many
# modules, for all kinds of connection-related activity.
#
pool {
# Number of connections to start
start = 5
# Minimum number of connections to keep open
min = 4
# Maximum number of connections
#
# If these connections are all in use and a new one
# is requested, the request will NOT get a connection.
max = 10
# Spare connections to be left idle
#
# NOTE: Idle connections WILL be closed if "idle_timeout"
# is set.
spare = 3
# Number of uses before the connection is closed
#
# 0 means "infinite"
uses = 0
# The lifetime (in seconds) of the connection
lifetime = 0
# idle timeout (in seconds). A connection which is
# unused for this length of time will be closed.
idle_timeout = 60
# NOTE: All configuration settings are enforced. If a
# connection is closed because of "idle_timeout",
# "uses", or "lifetime", then the total number of
# connections MAY fall below "min". When that
# happens, it will open a new connection. It will
# also log a WARNING message.
#
# The solution is to either lower the "min" connections,
# or increase lifetime/idle_timeout.
}
# Set to 'yes' to read radius clients from the database ('nas'
table)
# Clients will ONLY be read on server startup.
# read_clients = yes
# Table to keep radius client info
client_table = "nas"
# This entry should be used for the default instance (sql {})
# of the SQL module.
group_attribute = "SQL-Group"
# Read database-specific queries
$INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf
}
----------------------------------------------------------------------------------------------------
If I start now radiusd -X, than I get this error:
/etc/radiusd-acct/mods-enabled/sql[38]: Failed to link to module
'rlm_bob': /usr/local/lib64/rlm_bob.so: cannot open shared object file:
No such file or directory /usr/local/lib/rlm_bob.so: cannot open shared
object file: No such file or directory
Honestly, in my eyes this error is a bit misleading, because it tells me
that a library is missing and not that the configuration is broken. But
okay, out of mistakes I can learn.
Nevertheless, thank you all and have a nice day.
Kind regards.
D. Stabla
