September 2017 - Freeradius-Users - lists.freeradius.org

Unlang and variables
by Ti Ti 29 Sep '17

29 Sep '17

Hello, I'm using unlang to discriminate the database to use as described in the code below. Is there a method to use variables so avoid the redundant check of NAS-Id? Thanks server rad { listen { ipaddr = * port = 1812 type = auth } listen { ipaddr = * port = 1813 type = acct } authorize { if (&NAS-Identifier =~ /test/i) { db1 } if (&NAS-Identifier =~ /test2/i) { db2 } } accounting { if (&NAS-Identifier =~ /test/i) { db1 } if (&NAS-Identifier =~ /test2/i) { db2 } } session { if (&NAS-Identifier =~ /test/i) { db1 } if (&NAS-Identifier =~ /test2/i) { db2 } } }

2 11

monitor an eap session in a production environment with a lot of devices
by Marco Santantonio 29 Sep '17

29 Sep '17

Hi all, I wanted to ask how to monitor an eap session in a production environment with a lot of devices. Have you developed a method or a best practice that helps in those cases? Analyzing freeradius debug, in addition to the state attribute, there is some internal variable to see if a package is part of an ongoing session, it's a retransmitted or duplicated packet, or is it the beginning of a new session? The standard log what does it say about it? many thanks! Marco -- **************************************** Marco Santantonio Direzione Sistemi Informativi, Portale, E-learning Sezione Fonia, VoIP e WiFi www.unito.it ****************************************

3 6

Failing proxied request for user, due to lack of any response from home server EDUROAM
by Marco Santantonio 29 Sep '17

29 Sep '17

Hello, I'm writing for a 802.1x authentication problem with eduroam. In our infrastructure we have two proxy-radius (freeradius 3.0.12 on debian stretch) which then turn the access-requests for our realm to internal freeradius servers. >From a log analysis I see: Wed Sep 27 16:07:15 2017: Proxy: (10) Marking home server 192.84.145.15 port 1812 alive where 192.84.145.15 = eduroam NRPS server Then I see a series of Wed Sep 27 16:10:20 2017: ERROR: (14613) ERROR: Failing proxied request for user "user@realm" due to lack of response from home server 192.84.145.15 port 1812 And I see some authentication that goes fine and others do not. Since we have experienced some difficulties connecting our users from outside, how can I debug this type of problem? Can it be a configuration error or a timeout problem? Many thanks! clients.conf # RADIUS.GARR.NET client radius.garr.net { ipaddr = 192.84.145.15 secret = xxx virtual_server = eduroam } # RADIUS2.GARR.NET client radius2.garr.net { ipaddr = 193.206.158.71 secret = xxx virtual_server = eduroam } proxy.conf wifi-rad-pool it's our internal radius authentication pool # SERVER home_server radius.garr.net { type = auth ipaddr = 192.84.145.15 port = 1812 secret = xxx require_message_authenticator = yes status_check = status-server } home_server radius2.garr.net { type = auth ipaddr = 193.206.158.71 port = 1812 secret = xxx require_message_authenticator = yes status_check = status-server } # POOL home_server_pool eduroam_pool { type = fail-over home_server = radius.garr.net home_server = radius2.garr.net virtual_server = eduroam } ## REALM realm NULL { auth_pool = wifi-rad-pool nostrip } realm "unito.it" { auth_pool = wifi-rad-pool nostrip } realm "edu.unito.it" { auth_pool = wifi-rad-pool nostrip } realm "~(.*)\.unito\.it$" { auth_pool = wifi-rad-pool nostrip } realm DEFAULT { auth_pool = eduroam_pool nostrip } eduroam virtual-server server eduroam { # Authorization authorize { filter_username rewrite_calling_station_id preprocess suffix } # Authentication authenticate { eap } # Post-Authentication post-auth { exec proxy-linelog Post-Auth-Type REJECT { attr_filter.access_reject proxy-linelog } } # Pre-Proxy pre-proxy { attr_filter.pre-proxy # pre_proxy_log } # Post-proxy post-proxy { attr_filter.post-proxy eap # post_proxy_log } } root@radius-02:~# freeradius -XC FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unix including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/status including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/control-socket including configuration file /etc/freeradius/3.0/sites-enabled/others including configuration file /etc/freeradius/3.0/sites-enabled/eduroam including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server wifi-rad01 { ipaddr = 192.168.19.92 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server wifi-rad02 { ipaddr = 192.168.19.93 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server wifi-rad03 { ipaddr = 192.168.19.94 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server wifi-rad04 { ipaddr = 192.168.19.95 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server radius.garr.net { ipaddr = 192.84.145.15 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server radius2.garr.net { ipaddr = 193.206.158.71 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool wifi-rad-pool { type = client-balance home_server = wifi-rad01 home_server = wifi-rad02 home_server = wifi-rad03 home_server = wifi-rad04 } realm NULL { auth_pool = wifi-rad-pool nostrip } realm unito.it { auth_pool = wifi-rad-pool nostrip } realm edu.unito.it { auth_pool = wifi-rad-pool nostrip } realm ~(.*)\.unito\.it$ { auth_pool = wifi-rad-pool nostrip } home_server_pool eduroam_pool { type = fail-over virtual_server = eduroam home_server = radius.garr.net home_server = radius2.garr.net } realm DEFAULT { auth_pool = eduroam_pool nostrip } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wlc-lin { ipaddr = 172.31.254.253 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wlc-ste { ipaddr = 172.31.254.252 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wlc-fis { ipaddr = 172.31.254.251 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wlc-fis-02 { ipaddr = 172.31.254.250 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wlc-2504-fis { ipaddr = 130.192.155.203 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client cisco-prime { ipaddr = 172.31.254.240 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client kpi-server { ipaddr = 192.168.19.16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client vpn { ipaddr = 130.192.150.233 require_message_authenticator = no secret = <<< secret >>> virtual_server = "others" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client edisu { ipaddr = 130.192.108.4 require_message_authenticator = no secret = <<< secret >>> virtual_server = "others" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius.garr.net { ipaddr = 192.84.145.15 require_message_authenticator = no secret = <<< secret >>> virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius2.garr.net { ipaddr = 193.206.158.71 require_message_authenticator = no secret = <<< secret >>> virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Autz-Type = Status-Server # Creating Auth-Type = eap # Creating Auth-Type = mschap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_linelog # Loading module "proxy-linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog proxy-linelog { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "custom.%{%{reply:Packet-Type}:-default}" } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "proxy-linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server status { # from file /etc/freeradius/3.0/sites-enabled/status # Loading authorize {...} } # server status server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server others { # from file /etc/freeradius/3.0/sites-enabled/others # Loading authenticate {...} # Loading authorize {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server others server eduroam { # from file /etc/freeradius/3.0/sites-enabled/eduroam # Loading authenticate {...} # Loading authorize {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server eduroam server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Skipping IP addresses and Ports #### listen { type = "control" } listen { type = "status" ipaddr = 127.0.0.1 port = 18121 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Configuration appears to be OK root@radius-02:~# -- **************************************** Marco Santantonio Direzione Sistemi Informativi, Portale, E-learning Sezione Fonia, VoIP e WiFi www.unito.it ****************************************

3 4

DB handles and Discarding duplicate request messages
by Andrés Gómez 28 Sep '17

28 Sep '17

Hi dear list. I have this message on my freeradius log: Error: rlm_sql (sql): There are no DB handles to use! skipped 0 so I increased the num_sql_socks to 50 in the sql.conf file. It fixed the issue!!! But after that has appeared this new message: Error: Discarding duplicate request from client todos port ZZZZ - ID: 5 due to unfinished request XXXX a lot of times. What does it mean? Do I have to improve the sql configuration? Regards -- *C. Andrés Gómez R.*

2 3

ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
by Adam Cage 28 Sep '17

28 Sep '17

People, I have working OK a Freeradius with AD Authentication and LDAP Authorization. Everything is OK when I use my service to authenticate users for the WiFi service. But now I want to add a Cisco Firepower IPS authentication, and I fail. The Cisco Firepower IPS has a Radius configuration interface where I fill out all the basic necessary data: Radius IP and port, Secret and Default User Role. In the Freeradius server, I have edited /etc/freeradius/sites-available/defaullt and inner-tunnel files, adding a clause similar to the current ones, as follow (the unique condition is the user belongs to IPS LDAP group): if ..... ....... elsif (LDAP-Group == "IPS") { update reply { Reply-Message = "Hello %{User-Name}: Access enabled to Firepower" } ok } else { reject } and the Freeradius debug output is this: rlm_ldap::ldap_groupcmp: User found in group WiFi-Corp [ldap] ldap_release_conn: Release Id: 0 ? Evaluating (LDAP-Group == "IPS") -> TRUE ++? elsif (LDAP-Group == "IPS") -> TRUE ++elsif (LDAP-Group == "IPS") { +++update reply { expand: Hello %{User-Name}: Access enabled to Firepower -> Hello adam: Access enabled to Firepower +++} # update reply = noop +++[ok] = ok ++} # elsif (LDAP-Group == "IPS") = ok ++ ... skipping else for request 203: Preceding "if" was taken +} # group authorize = ok ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type REJECT # Executing group from file /etc/freeradius/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> adam attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 203 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 203 Sending Access-Reject of id 147 to 172.20.1.1 port 52154 Reply-Message = "Hello adam: Access enabled to Firepower" Please can you help me??? Special thanks :) ADAM

3 9

wifi-authentication for win7 / win10
by Böringer Heiko 28 Sep '17

28 Sep '17

Dear community, after lots of hours invest in reading and troubleshooting I´ve decided to honestly ask for your support. Main objective ist to authorize Windows Client (Win 7 & 10) for wifi-access via wpa-enterprise when user is membership in a specific windows-group (ldap group authorization). But first of all I try to bring up the basic authentication against Active Directory. Current state is the following 1.) radtest bob hello localhost 0 testing123 -> Received Access-Accept -> so PAP Authentication works fine 2.) ntlm_auth --request-nt-key --domain=stadt-woerth --username=testuser1 --password=password -> NT_STATUS_OK: Success (0x0) -> NTLM_AUTH Authentication is fine 3.) radtest -t mschap testuser1 password localhost 0 testing123 -> Received Access-Accept -> so MSCHAP Authentication with NTLM_AUTH works fine But Win10 Computers nevertheless can´t authenticate. I kindly ask for hints how to move forward. Attached the debug log from freeradius start an win10 logon. Username is testuser1. root@woe-unifi-01:~# freeradius -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/detail.log including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/group_authorization including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 ipv4addr = * require_message_authenticator = no secret = <<< secret >>> shortname = "localhost" nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client w_Network { ipaddr = 10.1.1.0/16 require_message_authenticator = no secret = <<< secret >>> shortname = "w_WIFI" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } [1mDebugger not attached[0m # Creating Auth-Type = mschap # Creating Auth-Type = ntlm_auth # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃÃ”Å’Ã™Ã›ÃœÅ¸" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "10.1.1.86" identity = "cn=gen-ldap-svc,ou=TechnicalUsers,ou=Users,ou=woe-rath,ou=stadt-woerth,dc=stadt,dc=woerth,dc=de" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=stadt,dc=woerth,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_realm # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=STADT-WOERTH --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = yes with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/freeradius.key" certificate_file = "/etc/freeradius/certs/freeradius.pem" ca_file = "/etc/freeradius/certs/STADT-WOERTH-CA.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap [1mrlm_ldap: libldap vendor: OpenLDAP, version: 20440[0m accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } [1mrlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used[0m rlm_ldap (ldap): Connecting to ldap://10.1.1.86:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful [1mrlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used[0m rlm_ldap (ldap): Connecting to ldap://10.1.1.86:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful [1mrlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used[0m rlm_ldap (ldap): Connecting to ldap://10.1.1.86:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful [1mrlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used[0m rlm_ldap (ldap): Connecting to ldap://10.1.1.86:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful [1mrlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used[0m rlm_ldap (ldap): Connecting to ldap://10.1.1.86:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } [1mrlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending slots used[0m [1mrlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending slots used[0m [1mrlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending slots used[0m [1mrlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending slots used[0m [1mrlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending slots used[0m rlm_mschap (mschap): authenticating directly to winbind # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [1m[33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [0m [1m[33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". [0m # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} [1m[33mIgnoring "sql" (see raddb/mods-available/README.rst)[0m # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} [1m # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:334[0m } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 52724 Listening on proxy address :: port 39222 [1mReady to process requests[0m -Session start ----------------------------------------------------------------------------------- (0) Received Access-Request Id 71 from 10.1.71.19:48742 to 10.1.1.82:1812 length 191 (0) User-Name = "STADT-WOERTH\\testuser1" (0) NAS-Identifier = "f09fc2761540" (0) NAS-Port = 0 (0) Called-Station-Id = "02-9F-C2-78-15-40:w_WIFI" (0) Calling-Station-Id = "7A-F9-B2-95-1A-33" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02aa001b0153544144542d574f455254485c746573747573657231 (0) Message-Authenticator = 0xb03f1e7b46933b4e47f5b22f9421d098 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (0) auth_log: EXPAND %t (0) auth_log: --> Thu Sep 28 12:44:23 2017 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser1", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 170 length 27 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Identity does not match User-Name, setting from EAP Identity (0) eap: Failed in handler (0) [eap] = invalid (0) } # authenticate = invalid (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> testuser1 (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) eap: Identity does not match User-Name, setting from EAP Identity (0) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated [1m(0) Login incorrect: [testuser1/<via Auth-Type = eap>] (from client w_WIFI port 0 cli 7A-F9-B2-95-1A-33)[0m (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 71 from 10.1.1.82:1812 to 10.1.71.19:48742 length 20 Waking up in 3.9 seconds. (1) Received Access-Request Id 72 from 10.1.71.19:48742 to 10.1.1.82:1812 length 191 (1) User-Name = "STADT-WOERTH\\testuser1" (1) NAS-Identifier = "f09fc2761540" (1) NAS-Port = 0 (1) Called-Station-Id = "02-9F-C2-78-15-40:w_WIFI" (1) Calling-Station-Id = "7A-F9-B2-95-1A-33" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02a2001b0153544144542d574f455254485c746573747573657231 (1) Message-Authenticator = 0xb26ada64daad2d4e52f3973f7c78878e (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (1) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (1) auth_log: EXPAND %t (1) auth_log: --> Thu Sep 28 12:44:24 2017 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "testuser1", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 162 length 27 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Identity does not match User-Name, setting from EAP Identity (1) eap: Failed in handler (1) [eap] = invalid (1) } # authenticate = invalid (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> testuser1 (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) eap: Identity does not match User-Name, setting from EAP Identity (1) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated [1m(1) Login incorrect: [testuser1/<via Auth-Type = eap>] (from client w_WIFI port 0 cli 7A-F9-B2-95-1A-33)[0m (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 72 from 10.1.1.82:1812 to 10.1.71.19:48742 length 20 Waking up in 2.7 seconds. (2) Received Access-Request Id 73 from 10.1.71.19:48742 to 10.1.1.82:1812 length 191 (2) User-Name = "STADT-WOERTH\\testuser1" (2) NAS-Identifier = "f09fc2761540" (2) NAS-Port = 0 (2) Called-Station-Id = "02-9F-C2-78-15-40:w_WIFI" (2) Calling-Station-Id = "7A-F9-B2-95-1A-33" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02b5001b0153544144542d574f455254485c746573747573657231 (2) Message-Authenticator = 0x7d36e6ccb0f5785d308da23b46bd01bb (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (2) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (2) auth_log: EXPAND %t (2) auth_log: --> Thu Sep 28 12:44:25 2017 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "testuser1", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 181 length 27 (2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Identity does not match User-Name, setting from EAP Identity (2) eap: Failed in handler (2) [eap] = invalid (2) } # authenticate = invalid (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> testuser1 (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) eap: Identity does not match User-Name, setting from EAP Identity (2) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (2) [eap] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # Post-Auth-Type REJECT = updated [1m(2) Login incorrect: [testuser1/<via Auth-Type = eap>] (from client w_WIFI port 0 cli 7A-F9-B2-95-1A-33)[0m (2) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 73 from 10.1.1.82:1812 to 10.1.71.19:48742 length 20 Waking up in 1.5 seconds. (3) Received Access-Request Id 74 from 10.1.71.19:48742 to 10.1.1.82:1812 length 191 (3) User-Name = "STADT-WOERTH\\testuser1" (3) NAS-Identifier = "f09fc2761540" (3) NAS-Port = 0 (3) Called-Station-Id = "02-9F-C2-78-15-40:w_WIFI" (3) Calling-Station-Id = "7A-F9-B2-95-1A-33" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x0204001b0153544144542d574f455254485c746573747573657231 (3) Message-Authenticator = 0xd49876fd1d35eb7adcc3aa0be6e32a4f (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (3) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.1.71.19/auth-detail-20170928 (3) auth_log: EXPAND %t (3) auth_log: --> Thu Sep 28 12:44:26 2017 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "testuser1", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 27 (3) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Identity does not match User-Name, setting from EAP Identity (3) eap: Failed in handler (3) [eap] = invalid (3) } # authenticate = invalid (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> testuser1 (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) eap: Identity does not match User-Name, setting from EAP Identity (3) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated [1m(3) Login incorrect: [testuser1/<via Auth-Type = eap>] (from client w_WIFI port 0 cli 7A-F9-B2-95-1A-33)[0m (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 74 from 10.1.1.82:1812 to 10.1.71.19:48742 length 20 Waking up in 0.3 seconds. (0) Cleaning up request packet ID 71 with timestamp +25 Waking up in 1.2 seconds. (1) Cleaning up request packet ID 72 with timestamp +26 Waking up in 1.2 seconds. (2) Cleaning up request packet ID 73 with timestamp +27 Waking up in 1.2 seconds. (3) Cleaning up request packet ID 74 with timestamp +28 [1mReady to process requests[0m Kind regards, Heiko

2 1

Porting eduroam from 2 to 3
by Olivier 28 Sep '17

28 Sep '17

I am trying to use http://wiki.freeradius.org/guide/eduroam to port my existing eduroam configuration from FreeRadius 2 to 3.0.15 I have an LDAP backend and would like to use LDAP binding to authenticate the user. So far, the authorize is OK, but the Auth-Type is set to inner-eap and it will not try another LDAP bind in the authentication section: (8) ldap_wifi: EXPAND (&(csimAccountPermission=firewall)(uid=%{%{Stripped-User-Name}:-%{User-Name}})) (8) ldap_wifi: --> (&(csimAccountPermission=firewall)(uid=on)) (8) ldap_wifi: Performing search in "ou=People,ou=csim,dc=cs,dc=ait,dc=ac,dc=th" with filter "(&(csimAccountPermission=firewall)(uid=on))", scope "one" (8) ldap_wifi: Waiting for search result... (8) ldap_wifi: User object found at DN "uid=on,ou=People,ou=csim,dc=cs,dc=ait,dc=ac,dc=th" (8) ldap_wifi: Processing user attributes (8) ldap_wifi: control:Password-With-Header += '{MD5}something==' (8) [ldap_wifi] = updated (8) [files] = noop (8) pap: Converted: &control:Password-With-Header -> &control:MD5-Password (8) pap: Removing &control:Password-With-Header (8) pap: Normalizing MD5-Password from base64 encoding, 24 bytes -> 16 bytes (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) [mschap] = noop (8) } # authorize = updated (8) Found Auth-Type = inner-eap (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-eduroam (8) authenticate { (8) inner-eap: Expiring EAP session with state 0x3eae14c03ea60e9f (8) inner-eap: Finished EAP session with state 0x3eae14c03ea60e9f (8) inner-eap: Previous EAP request found for state 0x3eae14c03ea60e9f, released from the list (8) inner-eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) inner-eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-eduroam (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: on(a)cs.ait.ac.th (8) mschap: Client is using MS-CHAPv2 In version2, I used to have: server eduroam-inner-tunnel { authorize { auth_log suffix eap mschap pap ldap_wifi } authenticate { Auth-Type PAP { pap } Auth-Type MS-CHAP { mschap } ldap_wifi eap } Thanks in advance, Olivier --

2 4

EAP request to FreeRADIUS 3 server backed by MariaDB has empty password
by Oliver Webb 27 Sep '17

27 Sep '17

Is anyone here able to offer assistance with this ServerFault question? The debug output etc. is included in the question. https://serverfault.com/q/871802/292782 Thanks a million, Oliver

2 6

Trying to allow all user name and password
by David David 27 Sep '17

27 Sep '17

Hello, How are you ? I am trying to find a way to allow every user name and password to connect to my wifi network. I tried to put : DEFAULT Auth-Type := Accept in the /etc/raddb/users file and I change also the source code file : cryptpasswd like this : sub main { Getopt::Long::Configure("no_ignore_case", "bundling"); my @options = ( "des|d+", "md5|m+", "check|c+" ); usage() unless (eval { Getopt::Long::GetOptions(@options) } ); if ($opt_check) { usage unless ($#ARGV == 1); if (crypt($ARGV[0], $ARGV[1]) ne $ARGV[1]) { print "Password BAD\n"; return 1; # 0 } else { print "Password OK\n"; return 1; } } $opt_des = 1 unless ($opt_des || $opt_md5); usage() unless ($#ARGV == 0); die "DES password hashing not available\n" if ($opt_des && !check_des()); die "MD5 password hashing not available\n" if ($opt_md5 && !check_md5()); $salt = ($opt_md5 ? '$1$' : ''); for ($i = 0; $i < ($opt_md5 ? 8 : 2); $i++) { $salt .= $saltc[rand 64]; } $salt .= '$' if ($opt_md5); print crypt($ARGV[0], $salt), "\n"; 1; } But it still doesn't work, does anyone have any idea of where to change the code to accept password matching ? Thank you ! David

3 5

EAP-TLS working but asking for cert
by Chevalier Violet 27 Sep '17

27 Sep '17

Hi all, Trying to get the hang of this EAP-TLS thing on my iPhone. I did finally get a p12 cert working on my phone. But now when I connect, it asks me to trust a cert. I've tried installing the ca.pem and the ca.der on my iPhone several times now, no luck. Similarly, when I connect via Linux, I'm able to do so without showing my ca.pem. But Linux doesn't ask me to trust a cert--any clues what's going on? Let me know if there are config file I can help you have? CV! -- "Do not speak, unless it improves on silence." -- Buddha

4 12