November 2018 - Freeradius-Users - lists.freeradius.org

FreeRadius 3.0.11 [Best method to log access accept requests to DB]
by Ibrahim Nezar Al-Mahfooz 19 Nov '18

19 Nov '18

Hi, We are trying to log users access accept requests in a database for later statistics and analysis for the network. Firstly, we accomplished this requirement using the post-auth section by using sql module to inserting users request and it worked perfectly, however, and obviously, if the database is down for any reason, the radius won't process further requests which will prevent users from authentication. So we are wondering if there is any method to log radius accept request in a similar fashion like "Post-Auth-Type REJECT" where we noticed that FreeRadius can keep accepting radius requests and tolerate DB failures. Ibrahim --

5 13

Tough time getting FreeRADIUS 3.0.9 to work with mysql
by Kwesi Yankson 19 Nov '18

19 Nov '18

Hello,I am a freeRADIUS 2.x user and want to start using freeRADIUS 3.x.xI have installed freeRADIUS 3.0.9 and done a lot of reading since I want to avoid being told to "RTFM"I can't seem to get an Access-Accept when I do a radtest for MySQL users. I'm sure I'm missing something (still adjusting to the difference between the two version). Can someone help or point me in the right direction? Below is my debug:(1) Received Access-Request Id 121 from 127.0.0.1:35861 to 127.0.0.1:1812 length 72 (1) User-Name = "me" (1) User-Password = "pass" (1) NAS-IP-Address = 127.0.1.1 (1) NAS-Port = 0 (1) Message-Authenticator = 0xd9c706bfd54e51cd4eab51d9e19e4da2 (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "me", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> me (1) sql: SQL-User-Name set to 'me' rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 252 seconds rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 252 seconds rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 252 seconds rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 252 seconds rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 244 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 244 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 244 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (7), 1 of 32 pending slots used rlm_sql (sql): Reserved connection (7) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'me' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'me' ORDER BY id rlm_sql (sql): Released connection (7) rlm_sql (sql): 0 of 1 connections in use. Need more spares rlm_sql (sql): Opening additional connection (8), 1 of 31 pending slots used (1) [sql] = notfound (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = ok (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) sql: EXPAND .query (1) sql: --> .query (1) sql: Using query template 'query' rlm_sql (sql): Reserved connection (7) (1) sql: EXPAND %{User-Name} (1) sql: --> me (1) sql: SQL-User-Name set to 'me' (1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'me', 'pass', 'Access-Reject', '2015-07-12 23:21:17') (1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'me', 'pass', 'Access-Reject', '2015-07-12 23:21:17') (1) sql: SQL query returned: success (1) sql: 1 record(s) updated rlm_sql (sql): Released connection (7) (1) [sql] = ok (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> me (1) attr_filter.access_reject: Matched entry DEFAULT at line 18 (1) [attr_filter.access_reject] = updated (1) eap: Request didn't contain an EAP-Message, not inserting EAP-Failure (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (1) <delay>: Sending delayed response (1) <delay>: Sent Access-Reject Id 121 from 127.0.0.1:1812 to 127.0.0.1:35861 length 20 Waking up in 3.9 seconds. (1) <delay>: Cleaning up request packet ID 121 with timestamp +252 Thanks in advance

6 92

FreeRADIUS and Active Directory Integration
by Scott Pickles 19 Nov '18

19 Nov '18

I'm sure you're reading the subject going "ugh not another one". But there is so much documentation out there and all of it slightly different that I don't know which end is up at this point. I would like to use FreeRADIUS to authenticate VPN users and wireless, and I'm working on VPN right now. From what I understand so far, I want to use LDAP to check if the person is in the right group first, and if not reject them. If they are in the right group then authenticate using ntlm_auth. I am also understanding that the place to do this is no longer the users/authorize file and that it should be done in the 'default' file using 'unlang'. Is this correct so far? If so, can someone give me an example of the 'unlang' portion?

6 36

LDAP (rlm_ldap) Version 3.0.9
by Scott Pickles 19 Nov '18

19 Nov '18

I'm running a CentOS 7 environment and I just did a fresh install of v3.0.9 of FreeRADIUS. I also installed version 1.0.2d of openssl so I'm not subject to heartbleed. When I installed the ldap module, yum downloaded version 3.0.4 and also installed a heartbleed vulnerable version of openssl and broke my install. I know how to patch radiusd.conf for the heartbleed vulnerability but I'd rather not. So I removed the ldap module, re-installed openssl 1.0.2d and recompiled FreeRADIUS. Is there a repo that will provide me with a 3.0.9 version of the ldap module? If not, can I compile and point to my lib directory for openssl 1.0.2d instead? Yum downloads an RPM and I don't know of a way to simply extract that, so I am looking for a way to compile from source for either version 3.0.4 or 3.0.9 if it exists. Don't know where to look for the source(s).

4 7

FR 3.0: Fall back to proxy if SQL returns no result
by Rens Houben 19 Nov '18

19 Nov '18

Hello, I'm (still) working on migrating an existing Radiator setup to FreeRADIUS, and after some deliberation it was felt that the best way to handle the transition would be to have FreeRADIUS use the existing setup as proxies and configure it to fall back to said proxies when rlm_sql returns no hits. I've managed to set up the proxies thanks to the example in proxy.conf and the documentation in https://wiki.freeradius.org/config/Proxy, but all the instructions for /using/ the proxy pool involve setting specific realms rather than fallback, and I'm not sure if I'm even using the right search terms. Additionally, looking through the freeradius -X debug log I notice that while it does recognize the home_server stanzas I added to the virtual host, it does /not/ acknowledge the home_server_pool stanza in the same file. Have I missed something? --Rens.

3 8

Reply-Messages based on different conditions
by Kwesi Yankson 19 Nov '18

19 Nov '18

Hello,I'm using freeRADIUS 3.0.9I use the sql module to do AAAI currently want to use unlang to do the following.Assuming there a user called "bob" who has the password "pass"I want unlung to compare the username and password in such a way thatif username is "bob" and password is not "pass" a Reply-Message such as "Incorrect password for user "bob" " will be sent. This scenario is for only if the username bob exists.If username "bob" does not exist the a Reply-Message = "User "bob" not found" Can someone help me with the unlang which will do this?

2 1

LDAP Query: Not Found
by Scott Pickles 19 Nov '18

19 Nov '18

How can I further troubleshoot what might be the cause for my query against LDAP to return no results? I have verified the following from debugging and testing: [ ... SNIP ... ] # Loaded module rlm_ldap # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "dc01.myDomain.com" port = 3268 password = <<< secret >>> identity = "CN=Free RADIUS,CN=Users,DC=myDomain,DC=com" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "DC=myDomain,DC=com" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "DC=myDomain,DC=com" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "DC=myDomain,DC=com" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1 rlm_ldap: libldap vendor: OpenLDAP version: 20439 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to dc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... >>rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to dc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... >>rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to dc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... >>rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to dc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... >>rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to dc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... >>rlm_ldap (ldap): Bind successful } # modules [ ... SNIP ... ] So it appears to be binding to LDAP ok. I am binding on port 3268 to reference the global catalog and search sub-domains. [ ... SNIP ... ] Ready to process requests Received Access-Request Id 32 from 172.18.1.2:1025 to 172.18.2.100:1812 length 66 User-Name = 'spickles' User-Password = '****' NAS-IP-Address = 172.18.1.2 NAS-Port = 32 NAS-Port-Type = Virtual (1) Received Access-Request packet from host 172.18.1.2 port 1025, id=32, length=66 (1) User-Name = 'spickles' (1) User-Password = '****' (1) NAS-IP-Address = 172.18.1.2 (1) NAS-Port = 32 (1) NAS-Port-Type = Virtual (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) [preprocess] = ok (1) rewrite_calling_station_id rewrite_calling_station_id { (1) if (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i) (1) ERROR: Failed retrieving values required to evaluate condition (1) else else { (1) [noop] = noop (1) } # else else = noop (1) } # rewrite_calling_station_id rewrite_calling_station_id = noop (1) eap : No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop rlm_ldap (ldap): Reserved connection (4) (1) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap : --> (uid=spickles) (1) ldap : EXPAND DC=myDomain,DC=COM (1) ldap : --> DC=myDomain,DC=COM (1) ldap : Performing search in 'DC=myDomain,DC=COM' with filter '(uid=spickles)', scope 'sub' (1) ldap : Waiting for search result... >> (1) ldap : Search returned no results rlm_ldap (ldap): Released connection (4) rlm_ldap (ldap): 0 of 1 connections in use. Need more spares rlm_ldap (ldap): Opening additional connection (5) rlm_ldap (ldap): Connecting to rochdc01.myDomain.com:3268 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful >>(1) [ldap] = notfound (1) } # authorize = ok (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Login incorrect (Failed retrieving values required to evaluate condition): [spickles/****] (from client <<client_short_name>> port 32) (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject : EXPAND %{User-Name} (1) attr_filter.access_reject : --> spickles (1) attr_filter.access_reject : Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) eap : Request didn't contain an EAP-Message, not inserting EAP-Failure (1) [eap] = noop (1) remove_reply_message_if_eap remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else else { (1) [noop] = noop (1) } # else else = noop (1) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1 seconds Waking up in 0.6 seconds. Waking up in 0.3 seconds. (1) Sending delayed response (1) Sending Access-Reject packet to host 172.18.1.2 port 1025, id=32, length=0 Sending Access-Reject Id 32 from 172.18.2.100:1812 to 172.18.1.2:1025 Waking up in 3.9 seconds. (1) Cleaning up request packet ID 32 with timestamp +189 Ready to process requests [ ... SNIP ... ] Not sure why it didn't find my user. My user is in the standard container (i.e. CN=Users) so I would think that sub would search there and find it? Perhaps that is my problem and either my base is incorrect or my scope is not correct? However, this seems to be correct according to the wiki (modules/Rlm_ldap). A final test with 'ldapsearch' yields similar results with no further information: [ ... SNIP ... ] []# ldapsearch -x -b "DC=myDomain,DC=com" -D "CN=Free RADIUS,CN=Users,DC=myDomain,DC=com" -h myDomain.com -w "<<password>>" "(&(CN=VPN-Internal,OU=VPN,OU=Groups,DC=myDomain,DC=com))" # extended LDIF # # LDAPv3 # base <DC=myDomain,DC=com> with scope subtree # filter: (&(CN=VPN-Internal,OU=VPN,OU=Groups,DC=myDomain,DC=com)) # requesting: ALL # # search reference ref: ldap://DomainDnsZones.myDomain.com/DC=DomainDnsZones,DC=myDomain, DC=com # search result search: 2 >>result: 0 Success # numResponses: 2 # numReferences: 1 [ ... SNIP ... ] The only other thing I can think of is that the user that I'm binding to AD with to read information doesn't have the right permissions? But I would also think that the bind wouldn't be successful in the first place for the module if that were the case? I don't know what direction to take this in next to get more information. I would check the logs but since I'm running the server in debug mode the logs would just be duplicates of what I already have, correct?

5 18

Empty authorize section. Using default return values. error in 3.0.9
by Ums 19 Nov '18

19 Nov '18

Hi I have just installed freeradius 3.0.9 Didnot modify any files the only files i touched were 1. users to include my record 2. clients.conf to include my client started radius server and tried to authenticate the user i get the following messages I checked on the forum and saw various threads dealing with default config deleted etc I have just installed this radius server and not deleted or over written any config , just added a few lines in the 2 files above i have also given a cat of the sites-enabled/default Any help would be highly appreciated Mon Jul 20 07:19:13 2015 : Debug: radiusd: #### Opening IP addresses and Ports #### Mon Jul 20 07:19:14 2015 : Debug: Listening on auth address 50.50.1.1 port 1900 Mon Jul 20 07:19:14 2015 : Debug: Listening on acct address 50.50.1.1 port 1901 Mon Jul 20 07:19:14 2015 : Debug: Opening new proxy socket 'proxy address 50.50.1.1 port 0' Mon Jul 20 07:19:14 2015 : Debug: Listening on proxy address 50.50.1.1 port 45887 Mon Jul 20 07:19:14 2015 : Info: Ready to process requests Mon Jul 20 07:20:57 2015 : Debug: (0) Received Access-Request Id 237 from 50.50.1.2:1812 to 50.50.1.1:1900 length 119 Mon Jul 20 07:20:57 2015 : Debug: (0) User-Name = "00:19:95:20:00:02" Mon Jul 20 07:20:57 2015 : Debug: (0) User-Password = "xxxx" Mon Jul 20 07:20:57 2015 : Debug: (0) NAS-Identifier = "S" Mon Jul 20 07:20:57 2015 : Debug: (0) NAS-Port = 16842817 Mon Jul 20 07:20:57 2015 : Debug: (0) NAS-Port-Type = Async Mon Jul 20 07:20:57 2015 : Debug: (0) session-state: No State attribute Mon Jul 20 07:20:57 2015 : Debug: (0) Empty authorize section. Using default return values. Mon Jul 20 07:20:57 2015 : ERROR: (0) No Auth-Type found: rejecting the user via Post-Auth-Type = Reject Mon Jul 20 07:20:57 2015 : Debug: (0) Failed to authenticate the user Mon Jul 20 07:20:57 2015 : Debug: (0) Using Post-Auth-Type Reject Mon Jul 20 07:20:57 2015 : Debug: (0) Post-Auth-Type sub-section not found. Ignoring. Mon Jul 20 07:20:57 2015 : Debug: (0) Delaying response for 1.000000 seconds Mon Jul 20 07:20:57 2015 : Debug: Waking up in 0.3 seconds. Mon Jul 20 07:20:57 2015 : Debug: Waking up in 0.6 seconds. Mon Jul 20 07:20:58 2015 : Debug: (0) <delay>: Sending delayed response Mon Jul 20 07:20:58 2015 : Debug: (0) <delay>: Sent Access-Reject Id 237 from 50.50.1.1:1900 to 50.50.1.2:1812 length 20 Mon Jul 20 07:20:58 2015 : Debug: Waking up in 3.9 seconds. Mon Jul 20 07:21:02 2015 : Debug: (0) <delay>: Cleaning up request packet ID 237 with timestamp +104 Mon Jul 20 07:21:02 2015 : Info: Ready to process requests [linux raddb]# cd /usr/local/etc/raddb/ [linux sites-enabled]# pwd /usr/local/etc/raddb/sites-enabled [linux sites-enabled]# ls -ltr total 0 lrwxrwxrwx 1 root root 26 Jul 20 06:25 default -> ../sites-available/default lrwxrwxrwx 1 root root 31 Jul 20 06:25 inner-tunnel -> ../sites-available/inner-tunnel [linux sites-enabled]# [linux sites-enabled]# cat default ###################################################################### # # As of 2.0.0, FreeRADIUS supports virtual hosts using the # "server" section, and configuration directives. # # Virtual hosts should be put into the "sites-available" # directory. Soft links should be created in the "sites-enabled" # directory to these files. This is done in a normal installation. # # If you are using 802.1X (EAP) authentication, please see also # the "inner-tunnel" virtual server. You will likely have to edit # that, too, for authentication to work. # # $Id: e16363f12d3b8ba38a4c056dd09ffa9c2d5e7de1 $ # ###################################################################### # # Read "man radiusd" before editing this file. See the section # titled DEBUGGING. It outlines a method where you can quickly # obtain the configuration you want, without running into # trouble. See also "man unlang", which documents the format # of this file. # # This configuration is designed to work in the widest possible # set of circumstances, with the widest possible number of # authentication methods. This means that in general, you should # need to make very few changes to this file. # # The best way to configure the server for your local system # is to CAREFULLY edit this file. Most attempts to make large # edits to this file will BREAK THE SERVER. Any edits should # be small, and tested by running the server with "radiusd -X". # Once the edits have been verified to work, save a copy of these # configuration files somewhere. (e.g. as a "tar" file). Then, # make more edits, and test, as above. # # There are many "commented out" references to modules such # as ldap, sql, etc. These references serve as place-holders. # If you need the functionality of that module, then configure # it in radiusd.conf, and un-comment the references to it in # this file. In most cases, those small changes will result # in the server being able to connect to the DB, and to # authenticate users. # ###################################################################### server default { # # If you want the server to listen on additional addresses, or on # additional ports, you can use multiple "listen" sections. # # Each section make the server listen for only one type of packet, # therefore authentication and accounting have to be configured in # different sections. # # The server ignore all "listen" section if you are using '-i' and '-p' # on the command line. # listen { # Type of packets to listen for. # Allowed values are: # auth listen for authentication packets # acct listen for accounting packets # proxy IP to use for sending proxied packets # detail Read from the detail file. For examples, see # raddb/sites-available/copy-acct-to-home-server # status listen for Status-Server packets. For examples, # see raddb/sites-available/status # coa listen for CoA-Request and Disconnect-Request # packets. For examples, see the file # raddb/sites-available/coa # type = auth # Note: "type = proxy" lets you control the source IP used for # proxying packets, with some limitations: # # * A proxy listener CANNOT be used in a virtual server section. # * You should probably set "port = 0". # * Any "clients" configuration will be ignored. # # See also proxy.conf, and the "src_ipaddr" configuration entry # in the sample "home_server" section. When you specify the # source IP address for packets sent to a home server, the # proxy listeners are automatically created. # ipaddr/ipv4addr/ipv6addr - IP address on which to listen. # Out of several options the first one will be used. # # Allowed values are: # IPv4 address (e.g. 1.2.3.4, for ipv4addr/ipaddr) # IPv6 address (e.g. 2001:db8::1, for ipv6addr/ipaddr) # hostname (radius.example.com, # A record for ipv4addr, # AAAA record for ipv6addr, # A or AAAA record for ipaddr) # wildcard (*) # # ipv4addr = * # ipv6addr = * ipaddr = * # Port on which to listen. # Allowed values are: # integer port number (1812) # 0 means "use /etc/services for the proper port" port = 0 # Some systems support binding to an interface, in addition # to the IP address. This feature isn't strictly necessary, # but for sites with many IP addresses on one interface, # it's useful to say "listen on all addresses for eth0". # # If your system does not support this feature, you will # get an error if you try to use it. # # interface = eth0 # Per-socket lists of clients. This is a very useful feature. # # The name here is a reference to a section elsewhere in # radiusd.conf, or clients.conf. Having the name as # a reference allows multiple sockets to use the same # set of clients. # # If this configuration is used, then the global list of clients # is IGNORED for this "listen" section. Take care configuring # this feature, to ensure you don't accidentally disable a # client you need. # # See clients.conf for the configuration of "per_socket_clients". # # clients = per_socket_clients # # Connection limiting for sockets with "proto = tcp". # # This section is ignored for other kinds of sockets. # limit { # # Limit the number of simultaneous TCP connections to the socket # # The default is 16. # Setting this to 0 means "no limit" max_connections = 16 # The per-socket "max_requests" option does not exist. # # The lifetime, in seconds, of a TCP connection. After # this lifetime, the connection will be closed. # # Setting this to 0 means "forever". lifetime = 0 # # The idle timeout, in seconds, of a TCP connection. # If no packets have been received over the connection for # this time, the connection will be closed. # # Setting this to 0 means "no timeout". # # We STRONGLY RECOMMEND that you set an idle timeout. # idle_timeout = 30 } } # # This second "listen" section is for listening on the accounting # port, too. # listen { ipaddr = * # ipv6addr = :: port = 0 type = acct # interface = eth0 # clients = per_socket_clients limit { # The number of packets received can be rate limited via the # "max_pps" configuration item. When it is set, the server # tracks the total number of packets received in the previous # second. If the count is greater than "max_pps", then the # new packet is silently discarded. This helps the server # deal with overload situations. # # The packets/s counter is tracked in a sliding window. This # means that the pps calculation is done for the second # before the current packet was received. NOT for the current # wall-clock second, and NOT for the previous wall-clock second. # # Useful values are 0 (no limit), or 100 to 10000. # Values lower than 100 will likely cause the server to ignore # normal traffic. Few systems are capable of handling more than # 10K packets/s. # # It is most useful for accounting systems. Set it to 50% # more than the normal accounting load, and you can be sure that # the server will never get overloaded # # max_pps = 0 # Only for "proto = tcp". These are ignored for "udp" sockets. # # idle_timeout = 0 # lifetime = 0 # max_connections = 0 } } # IPv6 versions of the above - read their full config to understand options listen { type = auth ipv6addr = :: # any. ::1 == localhost port = 0 # interface = eth0 # clients = per_socket_clients limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { ipv6addr = :: port = 0 type = acct # interface = eth0 # clients = per_socket_clients limit { # max_pps = 0 # idle_timeout = 0 # lifetime = 0 # max_connections = 0 } } # Authorization. First preprocess (hints and huntgroups files), # then realms, and finally look in the "users" file. # # Any changes made here should also be made to the "inner-tunnel" # virtual server. # # The order of the realm modules will determine the order that # we try to find a matching realm. # # Make *sure* that 'preprocess' comes before any realm if you # need to setup hints for the remote radius server authorize { # # Take a User-Name, and perform some checks on it, for spaces and other # invalid characters. If the User-Name appears invalid, reject the # request. # # See policy.d/filter for the definition of the filter_username policy. # filter_username # # The preprocess module takes care of sanitizing some bizarre # attributes in the request, and turning them into attributes # which are more standard. # # It takes care of processing the 'raddb/hints' and the # 'raddb/huntgroups' files. preprocess # If you intend to use CUI and you require that the Operator-Name # be set for CUI generation and you want to generate CUI also # for your local clients then uncomment the operator-name # below and set the operator-name for your clients in clients.conf # operator-name # # If you want to generate CUI for some clients that do not # send proper CUI requests, then uncomment the # cui below and set "add_cui = yes" for these clients in clients.conf # cui # # If you want to have a log of authentication requests, # un-comment the following line. # auth_log # # The chap module will set 'Auth-Type := CHAP' if we are # handling a CHAP request and Auth-Type has not already been set chap # # If the users are logging in with an MS-CHAP-Challenge # attribute for authentication, the mschap module will find # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' # to the request, which will cause the server to then use # the mschap module for authentication. mschap # # If you have a Cisco SIP server authenticating against # FreeRADIUS, uncomment the following line, and the 'digest' # line in the 'authenticate' section. digest # # The WiMAX specification says that the Calling-Station-Id # is 6 octets of the MAC. This definition conflicts with # RFC 3580, and all common RADIUS practices. Un-commenting # the "wimax" module here means that it will fix the # Calling-Station-Id attribute to the normal format as # specified in RFC 3580 Section 3.21 # wimax # # Look for IPASS style 'realm/', and if not found, look for # '@realm', and decide whether or not to proxy, based on # that. # IPASS # # If you are using multiple kinds of realms, you probably # want to set "ignore_null = yes" for all of them. # Otherwise, when the first style of realm doesn't match, # the other styles won't be checked. # suffix # ntdomain # # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP # authentication. # # It also sets the EAP-Type attribute in the request # attribute list to the EAP type from the packet. # # The EAP module returns "ok" if it is not yet ready to # authenticate the user. The configuration below checks for # that code, and stops processing the "authorize" section if # so. # # Any LDAP and/or SQL servers will not be queried for the # initial set of packets that go back and forth to set up # TTLS or PEAP. # eap { ok = return } # # Pull crypt'd passwords from /etc/passwd or /etc/shadow, # using the system API's to get the password. If you want # to read /etc/passwd or /etc/shadow directly, see the # mods-available/passwd module. # # unix # # Read the 'users' file. In v3, this is located in # raddb/mods-config/files/authorize files # # Look in an SQL database. The schema of the database # is meant to mirror the "users" file. # # See "Authorization Queries" in mods-available/sql -sql # # If you are using /etc/smbpasswd, and are also doing # mschap authentication, the un-comment this line, and # configure the 'smbpasswd' module. # smbpasswd # # The ldap module reads passwords from the LDAP database. -ldap # # Enforce daily limits on time spent logged in. # daily # expiration logintime # # If no other module has claimed responsibility for # authentication, then try to use PAP. This allows the # other modules listed above to add a "known good" password # to the request, and to do nothing else. The PAP module # will then see that password, and use it to do PAP # authentication. # # This module should be listed last, so that the other modules # get a chance to set Auth-Type for themselves. # pap # # If "status_server = yes", then Status-Server messages are passed # through the following section, and ONLY the following section. # This permits you to do DB queries, for example. If the modules # listed here return "fail", then NO response is sent. # # Autz-Type Status-Server { # # } } # Authentication. # # # This section lists which modules are available for authentication. # Note that it does NOT mean 'try each module in order'. It means # that a module from the 'authorize' section adds a configuration # attribute 'Auth-Type := FOO'. That authentication type is then # used to pick the appropriate module from the list below. # # In general, you SHOULD NOT set the Auth-Type attribute. The server # will figure it out on its own, and will do the right thing. The # most common side effect of erroneously setting the Auth-Type # attribute is that one authentication method will work, but the # others will not. # # The common reasons to set the Auth-Type attribute by hand # is to either forcibly reject the user (Auth-Type := Reject), # or to or forcibly accept the user (Auth-Type := Accept). # # Note that Auth-Type := Accept will NOT work with EAP. # # Please do not put "unlang" configurations into the "authenticate" # section. Put them in the "post-auth" section instead. That's what # the post-auth section is for. # authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # # Most people want CHAP authentication # A back-end database listed in the 'authorize' section # MUST supply a CLEAR TEXT password. Encrypted passwords # won't work. Auth-Type CHAP { chap } # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # If you have a Cisco SIP server authenticating against # FreeRADIUS, uncomment the following line, and the 'digest' # line in the 'authorize' section. digest # # Pluggable Authentication Modules. # pam # Uncomment it if you want to use ldap for authentication # # Note that this means "check plain-text password against # the ldap database", which means that EAP won't work, # as it does not supply a plain-text password. # # We do NOT recommend using this. LDAP servers are databases. # They are NOT authentication servers. FreeRADIUS is an # authentication server, and knows what to do with authentication. # LDAP servers do not. # # Auth-Type LDAP { # ldap # } # # Allow EAP authentication. eap # # The older configurations sent a number of attributes in # Access-Challenge packets, which wasn't strictly correct. # If you want to filter out these attributes, uncomment # the following lines. # # Auth-Type eap { # eap { # handled = 1 # } # if (handled && (Response-Packet-Type == Access-Challenge)) { # attr_filter.access_challenge.post-auth # handled # override the "updated" code from attr_filter # } # } } # # Pre-accounting. Decide which accounting type to use. # preacct { preprocess # # Merge Acct-[Input|Output]-Gigawords and Acct-[Input-Output]-Octets # into a single 64bit counter Acct-[Input|Output]-Octets64. # # acct_counters64 # # Session start times are *implied* in RADIUS. # The NAS never sends a "start time". Instead, it sends # a start packet, *possibly* with an Acct-Delay-Time. # The server is supposed to conclude that the start time # was "Acct-Delay-Time" seconds in the past. # # The code below creates an explicit start time, which can # then be used in other modules. It will be *mostly* correct. # Any errors are due to the 1-second resolution of RADIUS, # and the possibility that the time on the NAS may be off. # # The start time is: NOW - delay - session_length # # update request { # FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}" # } # # Ensure that we have a semi-unique identifier for every # request, and many NAS boxes are broken. acct_unique # # Look for IPASS-style 'realm/', and if not found, look for # '@realm', and decide whether or not to proxy, based on # that. # # Accounting requests are generally proxied to the same # home server as authentication requests. # IPASS suffix # ntdomain # # Read the 'acct_users' file files } # # Accounting. Log the accounting data. # accounting { # Update accounting packet by adding the CUI attribute # recorded from the corresponding Access-Accept # use it only if your NAS boxes do not support CUI themselves # cui # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. # radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool # # Log traffic to an SQL database. # # See "Accounting queries" in mods-available/sql -sql # # If you receive stop packets with zero session length, # they will NOT be logged in the database. The SQL module # will print a message (only in debugging mode), and will # return "noop". # # You can ignore these packets by uncommenting the following # three lines. Otherwise, the server will not respond to the # accounting request, and the NAS will retransmit. # # if (noop) { # ok # } # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # Cisco VoIP specific bulk accounting # pgsql-voip # For Exec-Program and Exec-Program-Wait exec # Filter attributes from the accounting response. attr_filter.accounting_response # # See "Autz-Type Status-Server" for how this works. # # Acct-Type Status-Server { # # } } # Session database, used for checking Simultaneous-Use. Either the radutmp # or rlm_sql module can handle this. # The rlm_sql module is *much* faster session { # radutmp # # See "Simultaneous Use Checking Queries" in mods-available/sql # sql } # Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # # If you need to have a State attribute, you can # add it here. e.g. for later CoA-Request with # State, and Service-Type = Authorize-Only. # # if (!&reply:State) { # update reply { # State := "0x%{randstr:16h}" # } # } # # For EAP-TTLS and PEAP, add the cached attributes to the reply. # The "session-state" attributes are automatically cached when # an Access-Challenge is sent, and automatically retrieved # when an Access-Request is received. # # The session-state attributes are automatically deleted after # an Access-Reject or Access-Accept is sent. # update { &reply: += &session-state: } # Get an address from the IP Pool. # main_pool # Create the CUI value and add the attribute to Access-Accept. # Uncomment the line below if *returning* the CUI. # cui # # If you want to have a log of authentication replies, # un-comment the following line, and enable the # 'detail reply_log' module. # reply_log # # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in mods-available/sql -sql # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # # Un-comment the following if you want to modify the user's object # in LDAP after a successful login. # # ldap # For Exec-Program and Exec-Program-Wait exec # # Calculate the various WiMAX keys. In order for this to work, # you will need to define the WiMAX NAI, usually via # # update request { # WiMAX-MN-NAI = "%{User-Name}" # } # # If you want various keys to be calculated, you will need to # update the reply with "template" values. The module will see # this, and replace the template values with the correct ones # taken from the cryptographic calculations. e.g. # # update reply { # WiMAX-FA-RK-Key = 0x00 # WiMAX-MSK = "%{EAP-MSK}" # } # # You may want to delete the MS-MPPE-*-Keys from the reply, # as some WiMAX clients behave badly when those attributes # are included. See "raddb/modules/wimax", configuration # entry "delete_mppe_keys" for more information. # # wimax # If there is a client certificate (EAP-TLS, sometimes PEAP # and TTLS), then some attributes are filled out after the # certificate verification has been performed. These fields # MAY be available during the authentication, or they may be # available only in the "post-auth" section. # # The first set of attributes contains information about the # issuing certificate which is being used. The second # contains information about the client certificate (if # available). # # update reply { # Reply-Message += "%{TLS-Cert-Serial}" # Reply-Message += "%{TLS-Cert-Expiration}" # Reply-Message += "%{TLS-Cert-Subject}" # Reply-Message += "%{TLS-Cert-Issuer}" # Reply-Message += "%{TLS-Cert-Common-Name}" # Reply-Message += "%{TLS-Cert-Subject-Alt-Name-Email}" # # Reply-Message += "%{TLS-Client-Cert-Serial}" # Reply-Message += "%{TLS-Client-Cert-Expiration}" # Reply-Message += "%{TLS-Client-Cert-Subject}" # Reply-Message += "%{TLS-Client-Cert-Issuer}" # Reply-Message += "%{TLS-Client-Cert-Common-Name}" # Reply-Message += "%{TLS-Client-Cert-Subject-Alt-Name-Email}" # } # Insert class attribute (with unique value) into response, # aids matching auth and acct records, and protects against duplicate # Acct-Session-Id. Note: Only works if the NAS has implemented # RFC 2865 behaviour for the class attribute, AND if the NAS # supports long Class attributes. Many older or cheap NASes # only support 16-octet Class attributes. # insert_acct_class # MacSEC requires the use of EAP-Key-Name. However, we don't # want to send it for all EAP sessions. Therefore, the EAP # modules put required data into the EAP-Session-Id attribute. # This attribute is never put into a request or reply packet. # # Uncomment the next few lines to copy the required data into # the EAP-Key-Name attribute # if (&reply:EAP-Session-Id) { # update reply { # EAP-Key-Name := &reply:EAP-Session-Id # } # } # Remove reply message if the response contains an EAP-Message remove_reply_message_if_eap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # # Add the ldap module name (or instance) if you have set # 'edir_account_policy_check = yes' in the ldap module configuration # # The "session-state" attributes are not available here. # Post-Auth-Type REJECT { # log failed authentications in SQL, too. -sql attr_filter.access_reject # Insert EAP-Failure message if the request was # rejected by policy instead of because of an # authentication failure eap # Remove reply message if the response contains an EAP-Message remove_reply_message_if_eap } } # # When the server decides to proxy a request to a home server, # the proxied request is first passed through the pre-proxy # stage. This stage can re-write the request, or decide to # cancel the proxy. # # Only a few modules currently have this method. # pre-proxy { # Before proxing the request add an Operator-Name attribute identifying # if the operator-name is found for this client. # No need to uncomment this if you have already enabled this in # the authorize section. # operator-name # The client requests the CUI by sending a CUI attribute # containing one zero byte. # Uncomment the line below if *requesting* the CUI. # cui # Uncomment the following line if you want to change attributes # as defined in the preproxy_users file. # files # Uncomment the following line if you want to filter requests # sent to remote servers based on the rules defined in the # 'attrs.pre-proxy' file. # attr_filter.pre-proxy # If you want to have a log of packets proxied to a home # server, un-comment the following line, and the # 'detail pre_proxy_log' section, above. # pre_proxy_log } # # When the server receives a reply to a request it proxied # to a home server, the request may be massaged here, in the # post-proxy stage. # post-proxy { # If you want to have a log of replies from a home server, # un-comment the following line, and the 'detail post_proxy_log' # section, above. # post_proxy_log # Uncomment the following line if you want to filter replies from # remote proxies based on the rules defined in the 'attrs' file. # attr_filter.post-proxy # # If you are proxying LEAP, you MUST configure the EAP # module, and you MUST list it here, in the post-proxy # stage. # # You MUST also use the 'nostrip' option in the 'realm' # configuration. Otherwise, the User-Name attribute # in the proxied request will not match the user name # hidden inside of the EAP packet, and the end server will # reject the EAP request. # eap # # If the server tries to proxy a request and fails, then the # request is processed through the modules in this section. # # The main use of this section is to permit robust proxying # of accounting packets. The server can be configured to # proxy accounting packets as part of normal processing. # Then, if the home server goes down, accounting packets can # be logged to a local "detail" file, for processing with # radrelay. When the home server comes back up, radrelay # will read the detail file, and send the packets to the # home server. # # With this configuration, the server always responds to # Accounting-Requests from the NAS, but only writes # accounting packets to disk if the home server is down. # # Post-Proxy-Type Fail-Accounting { # detail # } } }

5 7

Error Compiling 3.1.x
by Scott Pickles 19 Nov '18

19 Nov '18

I am compiling FreeRADIUS version 3.1.x from source and I get the following error: []# cd freeradius-server-3.1.x[]# ./configure --with-openssl-lib-dir=/usr/local/ssl/lib --with-openssl-include-dir=/usr/local/ssl/include[]# make [ .... SNIP ....] CC src/lib/version.c /usr/bin/ld: /usr/local/ssl/lib/libcrypto.a(md4_dgst.o): relocation R_X86_64_PC32 against undefined symbol `memset@@GLIBC_2.2.5' can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: final link failed: Bad value collect2: error: ld returned 1 exit status make: *** [build/lib/local/libfreeradius-radius.la] Error 1 So I recompile openssl: []# cd openssl-1.0.2d []# ./config -fPIC[]# make[]# make install Trying make again, different module but same suggestion? []# cd freeradius-server-3.1.x[]# make [ .... SNIP ....] CC src/modules/rlm_wimax/rlm_wimax.c /usr/bin/ld: /usr/local/ssl/lib/libcrypto.a(rsaz_exp.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC /usr/local/ssl/lib/libcrypto.a: could not read symbols: Bad value collect2: error: ld returned 1 exit status make: *** [build/lib/local/rlm_wimax.la] Error 1

3 3

Fwd: freeradius crashing
by 8zero2 operations 19 Nov '18

19 Nov '18

Hi, Here is a trace of crash Starting program: /usr/local/sbin/radiusd -fxx [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [New Thread 0x7fffebbf8700 (LWP 116866)] [New Thread 0x7fffeb3f7700 (LWP 116867)] [New Thread 0x7fffeabf6700 (LWP 116868)] [New Thread 0x7fffea3f5700 (LWP 116869)] [New Thread 0x7fffe9bf4700 (LWP 116870)] [New Thread 0x7fffe93f3700 (LWP 116871)] [New Thread 0x7fffe8bf2700 (LWP 116872)] [New Thread 0x7fffe83f1700 (LWP 116873)] [New Thread 0x7fffe7bf0700 (LWP 116874)] [New Thread 0x7fffe73ef700 (LWP 116875)] [New Thread 0x7fffe6bee700 (LWP 116876)] [New Thread 0x7fffe63ed700 (LWP 116877)] [New Thread 0x7fffe5bec700 (LWP 116878)] [New Thread 0x7fffe53eb700 (LWP 116879)] [New Thread 0x7fffe4bea700 (LWP 116880)] [New Thread 0x7fffe43e9700 (LWP 116881)] [New Thread 0x7fffe3be8700 (LWP 116882)] [New Thread 0x7fffe33e7700 (LWP 116883)] [New Thread 0x7fffe2be6700 (LWP 116884)] [New Thread 0x7fffe23e5700 (LWP 116885)] [New Thread 0x7fffe1be4700 (LWP 116886)] [New Thread 0x7fffe13e3700 (LWP 116887)] [New Thread 0x7fffe0be2700 (LWP 116888)] [New Thread 0x7fffe03e1700 (LWP 116889)] [New Thread 0x7fffdfbe0700 (LWP 116890)] [New Thread 0x7fffdf3df700 (LWP 116891)] [New Thread 0x7fffdebde700 (LWP 116892)] [New Thread 0x7fffde3dd700 (LWP 116893)] [New Thread 0x7fffddbdc700 (LWP 116894)] [New Thread 0x7fffdd3db700 (LWP 116895)] [New Thread 0x7fffdcbda700 (LWP 116896)] [New Thread 0x7fffdc3d9700 (LWP 116897)] [New Thread 0x7fffdbbd8700 (LWP 116898)] [New Thread 0x7fffdb3d7700 (LWP 116899)] [New Thread 0x7fffdabd6700 (LWP 116900)] [New Thread 0x7fffda3d5700 (LWP 116901)] [New Thread 0x7fffd9bd4700 (LWP 116902)] [New Thread 0x7fffd93d3700 (LWP 116903)] [New Thread 0x7fffd8bd2700 (LWP 116904)] [New Thread 0x7fffd83d1700 (LWP 116905)] [New Thread 0x7fffd7bd0700 (LWP 116906)] [New Thread 0x7fffd73cf700 (LWP 116907)] [New Thread 0x7fffd6bce700 (LWP 116908)] [New Thread 0x7fffd63cd700 (LWP 116909)] [New Thread 0x7fffd5bcc700 (LWP 116910)] [New Thread 0x7fffd53cb700 (LWP 116911)] [New Thread 0x7fffd4bca700 (LWP 116912)] [New Thread 0x7fffd43c9700 (LWP 116913)] [New Thread 0x7fffd3bc8700 (LWP 116914)] [New Thread 0x7fffd33c7700 (LWP 116915)] [New Thread 0x7fffd2bc6700 (LWP 118007)] [New Thread 0x7fffd23c5700 (LWP 118008)] [New Thread 0x7fffd1bc4700 (LWP 118009)] [New Thread 0x7fffd13c3700 (LWP 118010)] Thread 34 "radiusd" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffdbbd8700 (LWP 116898)] 0x0000000000442c62 in insert_into_proxy_hash (request=0x7fff500039d0) at src/main/process.c:2303 2303 request->home_server->currently_outstanding++; Id Target Id Frame 32 Thread 0x7fffdcbda700 (LWP 116896) "radiusd" 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 33 Thread 0x7fffdc3d9700 (LWP 116897) "radiusd" 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 * 34 Thread 0x7fffdbbd8700 (LWP 116898) "radiusd" 0x0000000000442c62 in insert_into_proxy_hash (request=0x7fff500039d0) at src/main/process.c:2303 35 Thread 0x7fffdb3d7700 (LWP 116899) "radiusd" 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 36 Thread 0x7fffdabd6700 (LWP 116900) "radiusd" 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 Thread 38 (Thread 0x7fffd9bd4700 (LWP 116902)): #0 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 __ret = -512 oldtype = 0 err = <optimized out> #1 do_futex_wait (sem=sem@entry=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:111 No locals. #2 0x00007ffff6c748d4 in __new_sem_wait_slow (sem=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:181 _buffer = {__routine = 0x7ffff6c747e0 <__sem_wait_cleanup>, __arg = 0x6873e8 <thread_pool+168>, __canceltype = 0, __prev = 0x0} err = <optimized out> d = 227633266688 #3 0x00007ffff6c7497a in __new_sem_wait (sem=<optimized out>) at sem_wait.c:29 No locals. #4 0x000000000043c8ae in request_handler_thread (arg=0xb68680) at src/main/threads.c:755 self = 0xb68680 #5 0x00007ffff6c6c6ba in start_thread (arg=0x7fffd9bd4700) at pthread_create.c:333 __res = <optimized out> pd = 0x7fffd9bd4700 now = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140736846448384, -8854724666266409425, 0, 140737488346975, 140736846449088, 0, 8854641668176815663, 8854744653752641071}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> pagesize_m1 = <optimized out> sp = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #6 0x00007ffff676a41d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 No locals. Thread 37 (Thread 0x7fffda3d5700 (LWP 116901)): #0 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 __ret = -512 oldtype = 0 err = <optimized out> #1 do_futex_wait (sem=sem@entry=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:111 No locals. #2 0x00007ffff6c748d4 in __new_sem_wait_slow (sem=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:181 _buffer = {__routine = 0x7ffff6c747e0 <__sem_wait_cleanup>, __arg = 0x6873e8 <thread_pool+168>, __canceltype = 0, __prev = 0x0} err = <optimized out> d = 214748364800 #3 0x00007ffff6c7497a in __new_sem_wait (sem=<optimized out>) at sem_wait.c:29 No locals. #4 0x000000000043c8ae in request_handler_thread (arg=0xb67ea0) at src/main/threads.c:755 self = 0xb67ea0 #5 0x00007ffff6c6c6ba in start_thread (arg=0x7fffda3d5700) at pthread_create.c:333 __res = <optimized out> pd = 0x7fffda3d5700 now = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140736854841088, -8854724666266409425, 0, 140737488346975, 140736854841792, 0, 8854647161976858159, 8854744653752641071}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> pagesize_m1 = <optimized out> sp = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #6 0x00007ffff676a41d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 No locals. Thread 36 (Thread 0x7fffdabd6700 (LWP 116900)): #0 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 __ret = -512 oldtype = 0 err = <optimized out> #1 do_futex_wait (sem=sem@entry=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:111 No locals. #2 0x00007ffff6c748d4 in __new_sem_wait_slow (sem=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:181 _buffer = {__routine = 0x7ffff6c747e0 <__sem_wait_cleanup>, __arg = 0x6873e8 <thread_pool+168>, __canceltype = 0, __prev = 0x0} err = <optimized out> d = 227633266688 #3 0x00007ffff6c7497a in __new_sem_wait (sem=<optimized out>) at sem_wait.c:29 No locals. #4 0x000000000043c8ae in request_handler_thread (arg=0xb67770) at src/main/threads.c:755 self = 0xb67770 #5 0x00007ffff6c6c6ba in start_thread (arg=0x7fffdabd6700) at pthread_create.c:333 __res = <optimized out> pd = 0x7fffdabd6700 now = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140736863233792, -8854724666266409425, 0, 140737488346975, 140736863234496, 0, 8854648262025356847, 8854744653752641071}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> pagesize_m1 = <optimized out> sp = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #6 0x00007ffff676a41d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 No locals. Thread 35 (Thread 0x7fffdb3d7700 (LWP 116899)): #0 0x00007ffff6c74827 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, expected=0, futex_word=0x6873e8 <thread_pool+168>) at ../sysdeps/unix/sysv/linux/futex-internal.h:205 __ret = -512 oldtype = 0 err = <optimized out> #1 do_futex_wait (sem=sem@entry=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:111 No locals. #2 0x00007ffff6c748d4 in __new_sem_wait_slow (sem=0x6873e8 <thread_pool+168>, abstime=0x0) at sem_waitcommon.c:181 _buffer = {__routine = 0x7ffff6c747e0 <__sem_wait_cleanup>, __arg = 0x6873e8 <thread_pool+168>, __canceltype = 0, __prev = 0x0} err = <optimized out> d = 219043332096 #3 0x00007ffff6c7497a in __new_sem_wait (sem=<optimized out>) at sem_wait.c:29 No locals. #4 0x000000000043c8ae in request_handler_thread (arg=0xb671b0) at src/main/threads.c:755 self = 0xb671b0 #5 0x00007ffff6c6c6ba in start_thread (arg=0x7fffdb3d7700) at pthread_create.c:333 __res = <optimized out> pd = 0x7fffdb3d7700 now = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140736871626496, -8854724666266409425, 0, 140737488346975, 140736871627200, 0, 8854644964027344431, 8854744653752641071}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> pagesize_m1 = <optimized out> sp = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #6 0x00007ffff676a41d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 No locals. Thread 34 (Thread 0x7fffdbbd8700 (LWP 116898)): #0 0x0000000000442c62 in insert_into_proxy_hash (request=0x7fff500039d0) at src/main/process.c:2303 buf = '\000' <repeats 48 times>, "x|\275\333\230\000\000\000\000\234\240F\367&\270\037\220|\275\333\377\177\000\000\212\214B\000\000\000\000\000\320\071\000P\377\177\000\000\000\000\000\000\005\000\000\000\000\000\000\000\a", '\000' <repeats 11 times>, "`^\256", '\000' <repeats 12 times> tries = 0 success = true proxy_listener = 0xb8a510 #1 0x0000000000448396 in request_coa_originate (request=0xb98270) at src/main/process.c:4266 rcode = 7 pre_proxy_type = 0 vp = 0x0 coa = 0x7fff500039d0 ipaddr = {af = 2, ipaddr = {ip4addr = {s_addr = 1275110922}, ip6addr = {__in6_u = { __u6_addr8 = "\n\246\000L", '\000' <repeats 11 times>, __u6_addr16 = {42506, 19456, 0, 0, 0, 0, 0, 0}, __u6_addr32 = { 1275110922, 0, 0, 0}}}}, prefix = 32 ' ', scope = 0} buffer = "\000\207\275\333\377\177\000\000\000\234\240F\367&\270\037\240}\275\333\377\177\000\000\355l\226\367\377\177\000\000\260}\275\333\377\177\000\000pE\000P\377\177\000\000\340}\275\333\243\000\000\000\320\t\230\367\377\177\000\000\031\000\000\000S\000\000\000\270\321\203\000\000\000\000\000\220\236\271\000\000\000\000\000 z\202\000\000\000\000\000\004\000\000\000\000\000\000\000pE\000P\377\177\000\000\000\000\000\000\000\000\000\000\020~\275\333\377\177\000\000\340}\275\333\377\177\000\000.4\225\367\377\177\000\000\340}\275\333\377\177\000\000\315\061\225\367\200\177\000\000\000\000\000\000\070\004\000\000\020~\275\333\377\177\000\000\b~\275\333\377\177\000\000\000\000\000\000\000\000\000\000@ ~\275\333\377\177\000\000"... #2 0x0000000000440ad3 in request_finish (request=0xb98270, action=1) at src/main/process.c:1376 vp = 0x0 #3 0x000000000044128f in request_running (request=0xb98270, action=1) at src/main/process.c:1604 __FUNCTION__ = "request_running" #4 0x000000000043ca0b in request_handler_thread (arg=0xb66d60) at src/main/threads.c:826 self = 0xb66d60 #5 0x00007ffff6c6c6ba in start_thread (arg=0x7fffdbbd8700) at pthread_create.c:333 __res = <optimized out> pd = 0x7fffdbbd8700 now = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140736880019200, -8854724666266409425, 0, 140737488346975, 140736880019904, 0, 8854646064075843119, 8854744653752641071}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> pagesize_m1 = <optimized out> sp = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #6 0x00007ffff676a41d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 No locals. Regards, Mail: 8zero2.in(a)gmail.com Facebook: www.facebook.com/8zero2 Twitter: @8zero2_in Blog: blog.8zero2.in

3 6