May 2018 - Freeradius-Users - lists.freeradius.org

How to store in radius.log file the ip address of the end user
by Juliano 10 May '18

10 May '18

Dears I'm having a problem retrieving the ip of the end user device in the radius.log log file through the% {dhcp_options: DHCP-Your-IP-Address} attribute. Currently my freeradius is in version 3.0.15, using ldap authentication and other default settings. Only the dhcp module was configured to work as dhcp relay as follows: dhcp { listen { ipaddr = * port = 67 type = dhcp interface = VLAN100 } # Packets received on the socket will be processed through one # of the following sections, named after the DHCP packet type. # See dictionary.dhcp for the packet types. dhcp DHCP-Discover { update config { # IP Address of the DHCP server DHCP-Relay-To-IP-Address := x.x.x.1 } update request { # IP Address of the DHCP relay (ourselves) DHCP-Gateway-IP-Address := 127.0.0.1 } ok } dhcp DHCP-Request { update config { # IP Address of the DHCP server DHCP-Relay-To-IP-Address := x.x.x.1 } update request { DHCP-Gateway-IP-Address := 127.0.0.1 } ok } } However I get the error message: ERROR: dhcp_options got a ipaddr attribute needed octets. How can I solve this problem. Best Regards, Juliano.

2 1

How to allow specific group users only to auth
by Mohiddin Shaik 10 May '18

10 May '18

Hello Everyone, We have freeradius server with freeipa server backend for ldap authentication. Currently we able to use and login freeipa ldap accounts using freeradius, each every user available on freeipa ldap is able to login in all devices where ever we configured freeradius. Some of the devices like network devices we want to restricted only specific users (group users) are allowed to login. I a very new to this i tried but i am unable to figure out where should i mention/put restriction to check users group and allow to login. Thanks, Mohiddin.

3 6

NAS-restricted users
by brent s. 09 May '18

09 May '18

Hey all! First off, sorry for the noob questions. I've been reading the docs and previous mailing posts, but I'm still a little unclear on some things and wanted to run something by the list first for a sanity check/to see if there's a better way of doing this. I store NASes in MySQL and user accounts in LDAP (if necessary, this can be changed to store NASes in LDAP as well). I want to only allow users to authenticate if they're coming from a specific NAS associated with their account. 1.) What would be the most appropriate attribute for this in LDAP? Accounts currently have the following objectClasses: account, extensibleObject, radiusprofile, simpleSecurityObject, top. I'm thinking radiusClientShortname (since this attribute wouldn't have a "meaningful" association for radiusprofile but is available for use via extensibleObject objectClass - I would store the NASes in a separate base DN from the users). 2.) Can I even use the ${shortname} macro in a raddb/mods-available/ldap:ldap{user{filter=}} context? I would *assume* so since the NAS handling is done before the authentication handling, but assumptions are a bad thing to operate off of. The unlang documentation indicates I can't use unlang in this context, which is fine since I can just incorporate it into the LDAP filter, but I'm having some difficulty finding which macros are available where. 3.) Is there a better way to do this (preferably without duplicating NAS entries)? Ideally without using huntgroups or the like, which is how I usually see this sort of functionality achieved. -- brent saner https://square-r00t.net/ GPG info: https://square-r00t.net/gpg-info

2 4

Freeradius VLAN assignment
by Giorgos Tsirkas 08 May '18

08 May '18

Hello, I use Mikrotik router and i am trying to do VLAN assigment to mikrotik router. Router configuration is ok. Freeradius, complete authentication but seems cant do vlan assigment. In users file i have set this... DEFAULT Ldap-Group == "cn=support,ou=Groups,dc=example,dc=com" Mikrotik_Wireless_VLANID = 2 Thank you!

2 1

lock inactive users
by Eero Volotinen 08 May '18

08 May '18

Hi All We are using pam + google authenticator to authenticate our users. How to implement 90 day inactivity user lockout? This must be very stupid question, but still asking.. as I didn't way to way to implement this. tried pam_lastlog on /etc/pam.d/radiusd, but I didn't worked.. Eero

2 1

TLS alert messages not coming in EAP failure
by Sumant Gupta 03 May '18

03 May '18

Hi, My client is sending "client hello" message to which free radius is replying with Eap Failure message . In logs of free radius I see certificates are wrong and it issues TLS alert message. I want that those exact TLS alert message to be sent back to my client. Currently I see Eap Failure with no information of Failure. Sumant

2 1

configure freeradius to send no response if LDAP database fails
by Matthew Almen 02 May '18

02 May '18

Hello, I am trying to find out if there is a way to configure freeradius to exit or not send a response to queries if the local LDAP database becomes unavailable after the radius server is started. The radiusd service will not start if it cannot connect to the local LDAP database which I would expect. If I stop the LDAP service while freeradius is running I see from the debugging output pf /usr/sbin/radiusd -X that it fails to contact the LDAP server over and over and just keeps sending access-rejects back to our NAS router. Our router is configured to test the radius server with a test username but it will not mark the server as dead and move onto the next server in the server-group if it receives any response from the radius server. Even if an access-reject is received that still satisfies the test and the server does not get marked as dead. I need the server to be marked as dead if LDAP is down and radius is replying with an access-reject for everything. Any help would be appreciated. Thanks, Matt Here is radiusd -X output showing ldap failed and an access-reject being sent: rlm_ldap (ldap): Bind with cn=ldappkrv,ou=Polar,ou=Admins,dc=polarcomm,dc=com to ldap://localhost:389 failed: Can't contact LDAP server rlm_ldap (ldap): Failed to reconnect (1), no free connections are available (2) ldap: ERROR: Failed performing search: Can't contact LDAP server (2) [ldap] = fail (2) } # authorize = fail (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> 9k-radius-test-username (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) } # Post-Auth-Type REJECT = updated (2) Delaying response for 1.000000 seconds [Description: MatthewAlmen]

3 5

Freeradius 3.0.16 behind NAT
by Bassem Mettichi 02 May '18

02 May '18

Hello, i am running freeradius 3.0.16 on Redhat 7.1 behind NAT, i have two servers keepalived + ipvsadm ande two servers freerdius, on keepalived iam using NAT when i test an accounting from a NAS i send request to the VIP but i get response directly from the radius server so recieved packet comes with source IP of freerdaius server and not the VIP, the nas rejected the packet: radclient: Received reply to request we did not send. (id=185 socket 3) the problem is i have the same architecture with freerdaius 3.0.4 and radclient same version and the NAS accepted the packet inspite source IP is for freeradius server and is not the VIP is there any difference between the two version on checking source IP packet? i would like the nas to ignore checking the source IP address of the packet is thsre any solution? Thanks in advance Mettichi Bassem

2 1

Can't get past first stage of authentication
by Nick Howitt 02 May '18

02 May '18

Having set up a test VM and validated it with eapol_test, I am now moving to a live box with a real router. Again I have eapol_test working (if I use -aWAN_IP). I have my WAP at 172.22.22.2 and LAN interface as 172.22.22.1. Pretty much the only difference from the default installation is enabling ntdomain in sites-available/default and sites-available/inner tunnel and I've set up a local realm for CLEARSYSTEM in preparation for a domain login. Also ldap credentials have been set up. First I am trying a non-domain login with the user/pass I have checked in eapol_test but it is not getting very far: [root@microserver ~]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clearos-proxy.conf including configuration file /etc/raddb/clearos-clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/chap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/accounting including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm CLEARSYSTEM { } radiusd: #### Loading Clients #### client 10.0.2.15 { require_message_authenticator = no secret = <<< secret >>> shortname = "eapol_test1" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.0.2.15. Please fix your configuration Support for old-style clients will be removed in a future release client 172.22.22.2 { require_message_authenticator = no secret = <<< secret >>> shortname = "Draytek" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.22.22.2. Please fix your configuration Support for old-style clients will be removed in a future release client 172.22.22.3 { require_message_authenticator = no secret = <<< secret >>> shortname = "eapol_test" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.22.22.3. Please fix your configuration Support for old-style clients will be removed in a future release client 172.17.2.5 { require_message_authenticator = no secret = <<< secret >>> shortname = "eapol_test2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.17.2.5. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "localhost" identity = "cn=manager,ou=Internal,dc=system,dc=lan" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "dc=system,dc=lan" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap instantiate { } # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/clearos-users reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 45545 Listening on proxy address :: port 56932 Ready to process requests (0) Received Access-Request Id 128 from 172.22.22.2:3600 to 172.22.22.1:1812 length 81 (0) User-Name = "test1" (0) NAS-IP-Address = 172.22.22.2 (0) NAS-Port = 29 (0) NAS-Port-Type = Wireless-802.11 (0) Framed-MTU = 1396 (0) EAP-Message = 0x0200000a017465737431 (0) Message-Authenticator = 0x358bea5435d5bc0afc75182c8dea0caf (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "test1", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: No '\' in User-Name = "test1", looking up realm NULL (0) ntdomain: No such realm "NULL" (0) [ntdomain] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 10 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x26d9697c26d86de7 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 128 from 172.22.22.1:1812 to 172.22.22.2:3600 length 0 (0) EAP-Message = 0x0101001604109e60e7f56e2b6643625ba3d249f19274 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x26d9697c26d86de7e935bd01712d9542 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 128 with timestamp +186 Ready to process requests On the PC I've been through the connection setting it up as WPA2-Enterprise, don't validate certificates, use user authentication. How can I get to the next stage? Will it only work now if I join the computer to the domain? I have tried user CLEARSYSTEM\test1 with the same result except it correctly strips CLEARSYSTEM from the User-name. Thanks, Nick

2 3

Chained intermediate certificate usage
by Sumant Gupta 01 May '18

01 May '18

Hi, I am planning to use chained certificates for my testing. So i am keeping all the certificates like Root Certificate/Manufacture/Sub-Manufacture certificate / device in the certs/ directory. I am setting auto-chain as yes. In 'eap' config file I am setting root.pem and device.pem . Where do I need to place the intermediate certificates.? Regards Sumant

2 5