June 2018 - Freeradius-Users - lists.freeradius.org

Using rlm_rest for authorization and sqlcounters for session and bandwidth limits
by Rohith Asrk 27 Jun '18

27 Jun '18

Hi everyone, I'm working on a feature for being able to enforce session and bandwidth limits on users using a web interface of django-freeradius. I wish to authenticate the users using the rlm_rest module and use custom defined sqlcounters for putting limits on users. For ex., sqlcounter dailybandwidthcounter { counter_name = Max-Daily-Session-Traffic check_name = Max-Daily-Session-Traffic sql_module_instance = sql key = 'User-Name' reset = daily Reply-Message = "Your daily bandwidth limit has reached" query = "SELECT sum(AcctOutputOctets) + sum(AcctInputOctets) FROM radacct WHERE \ UserName = '%{${key}}' AND \ acctstarttime BETWEEN FROM_UNIXTIME('%%b') AND FROM_UNIXTIME('%%e')" } I'm not sure about configuring the FreeRADIUS configuration for accomplishing this. My authorize section looks like authorize { # ... dailybandwidthcounter rest # ... } I wish to use the concept of radius groups to implement this feature, i.e., add instances of radgroupcheck with attributes like Max-Daily-Session-Traffic so that the dailybandwidth counter checks it and puts the limits. I tried testing it with radclient and radtest but haven't been able to see any results. Am I going the right way? Can anyone help me with the concept of enforcing limits and also configuration? Regards, Rohith ASRK

2 4

Accounting Request
by Muhammed Buvaydani 27 Jun '18

27 Jun '18

I working on freeradius twith fortigate firewall . every things go fine and now I can make authentication and accounting. My problem is when making authentication for any user accounting-request from nas is send to Radius server and the user's info will insert again into radacct table, which will make big wrong in my program This is the Radius - x result when making authentication Sending Access-Accept of id 78 to 10.10.0.103 port 1030 Cisco-AVPair = "shell:priv-lvl=1" Idle-Timeout = 1000 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from host 10.10.0.103 port 1030, id=79, leng th=122 Acct-Status-Type = Start Acct-Session-Id = "1018bc85" User-Name = "10966417880" NAS-Identifier = "ftg" Framed-IP-Address = 192.168.33.4 Fortinet-Client-IP-Address = 192.168.33.4 Fortinet-Vdom-Name = "root" NAS-IP-Address = 10.10.0.20 Called-Station-Id = "10.10.0.20" Calling-Station-Id = "192.168.33.4" Event-Timestamp = "Jun 27 2018 16:44:33 +03" # Executing section preacct from file /etc/freeradius/sites-enabled/default.save +group preacct { ++[preprocess] = ok [acct_unique] WARNING: Attribute NAS-Port was not found in request, unique ID MA Y be inconsistent [acct_unique] Hashing ',NAS-Identifier = "ftg",NAS-IP-Address = 10.10.0.20,Acct- Session-Id = "1018bc85",User-Name = "10966417880"' [acct_unique] Acct-Unique-Session-ID = "a5d8f840a1843c92". ++[acct_unique] = ok [suffix] No '@' in User-Name = "10966417880", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop +} # group preacct = ok # Executing section accounting from file /etc/freeradius/sites-enabled/default.s ave +group accounting { [detail] expand: %{Packet-Src-IP-Address} -> 10.10.0.103 [detail] expand: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:- %{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/freeradius/radacct/10.10.0 .103/detail-20180627 [detail] /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IP v6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.10.0.103/de tail-20180627 [detail] expand: %t -> Wed Jun 27 16:44:33 2018 ++[detail] = ok [sradutmp] expand: /var/log/freeradius/sradutmp -> /var/log/freeradius/srad utmp [sradutmp] expand: %{User-Name} -> 10966417880 rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! ++[sradutmp] = noop [sql] expand: %{User-Name} -> 10966417880 [sql] sql_set_user escaped user --> '10966417880' [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: INSERT INTO radacct (acctsessionid, ac ctuniqueid, username, realm, nasipaddress, naspo rtid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinf o_stop, acctinputoctets, acctoutputoctets, calledstationid, calli ngstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessi onsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Ses sion-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-A ddress}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Ser vice-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 27 rlm_sql (sql): Released sql socket id: 27 ++[sql] = ok [attr_filter.accounting_response] expand: %{User-Name} -> 10966417880 attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] = updated +} # group accounting = updated Sending Accounting-Response of id 79 to 10.10.0.103 port 1030 Finished request 1. Cleaning up request 1 ID 79 with timestamp +41 Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 78 with timestamp +41 Ready to process requests. This mean every user will has tow records in to radacct table how can I stop that .

1 0

(no subject)
by Hailun Tan 27 Jun '18

27 Jun '18

I am trying to perform the user authentication via freeradius server on the ssh conection. I have setup the free radius server according to the wiki pages: https://wiki.freeradius.org/guide/Getting-Started In addition, I managed to install the dolaradius to manage the free radius. I have run the radtest for the servers. The configurations for the radius server is: free radius server IP: 10.10.150.134 free radius server port: 1812 master secret: NOJA user name: micfox user password: micfox001 On the client machine (client IP: 10.10.150.136), I run the following command: *dev-ldap-server: radtest micfox micfox001 10.10.150.134:1812 <http://10.10.150.134:1812> 1812 NOJA* Sending Access-Request of id 5 to 10.10.150.134 port 1812 User-Name = "micfox" User-Password = "micfox001" NAS-IP-Address = 10.10.150.136 NAS-Port = 1812 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 10.10.150.134 port 1812, id=5, length=38 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP So it should prove the free radius server is up and running. However, I have configured to use the pam-freeradius-auth.so to hookup with the PAM modules on the client machine to authenticate the ssh user. it does not work. I have updated the /etc/pam.d/sshd as follows: =========== *auth sufficient pam_radius_auth.so debug skip_passwd*# PAM configuration for the Secure Shell service # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # SELinux needs to be the first session rule. This ensures that any # lingering context has been cleared. Without this it is possible that a # module could execute code in the wrong domain. session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close # Set the loginuid process attribute. session required pam_loginuid.so # Create a new session keyring. session optional pam_keyinit.so force revoke # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. # This includes a dynamically generated part from /run/motd.dynamic # and a static (admin-editable) part from /etc/motd. session optional pam_motd.so motd=/run/motd.dynamic session optional pam_motd.so noupdate # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. session required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. session required pam_env.so user_readenv=1 envfile=/etc/default/locale # SELinux needs to intervene at login time to ensure that the process starts # in the proper default security context. Only sessions which are intended # to run in the user's context should be run after this. session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open # Standard Un*x password updating. @include common-password But now when I run the ssh micfox(a)10.10.150.136 (freeradius client's iP). the /var/log/auth.log has the following error messages: Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: Got user name micfox Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: ignore last_pass, force_prompt set Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: Sending RADIUS request code 1 Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: DEBUG: get_ipaddr(10.10.150.134) is available. (1812) Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: DEBUG: talk_radius(0x86960a0a) is available (1812,port). Jun 25 12:05:51 dev-ldap-server sshd[6441]: pam_radius_auth: DEBUG: waiting for response from radius server 10.10.150.134 with port 1812 (master secret: NOJA). *Jun 25 12:05:54 dev-ldap-server sshd[6441]: pam_radius_auth: RADIUS server 10.10.150.134 failed to respond* Jun 25 12:05:54 dev-ldap-server sshd[6441]: pam_radius_auth: All RADIUS servers failed to respond. Jun 25 12:05:54 dev-ldap-server sshd[6441]: pam_radius_auth: authentication failed Jun 25 12:05:54 dev-ldap-server sshd[6438]: Postponed keyboard-interactive for invalid user micfox from 127.0.0.1 port 37362 ssh2 [preauth] The RADIUS server always failed to respond.. I have configured the /etc/pam_radius_auth.conf as follows: # pam_radius_auth configuration file. Copy to: /etc/raddb/server # # For proper security, this file SHOULD have permissions 0600, # that is readable by root, and NO ONE else. If anyone other than # root can read this file, then they can spoof responses from the server! # # There are 3 fields per line in this file. There may be multiple # lines. Blank lines or lines beginning with '#' are treated as # comments, and are ignored. The fields are: # # server[:port] secret [timeout] # # the port name or number is optional. The default port name is # "radius", and is looked up from /etc/services The timeout field is # optional. The default timeout is 3 seconds. # # If multiple RADIUS server lines exist, they are tried in order. The # first server to return success or failure causes the module to return # success or failure. Only if a server fails to response is it skipped, # and the next server in turn is used. # # The timeout field controls how many seconds the module waits before # deciding that the server has failed to respond. # # server[:port] shared_secret timeout (s) *10.10.150.134:1831 <http://10.10.150.134:1831> NOJA 3* #other-server other-secret 3 # # having localhost in your radius configuration is a Good Thing. # # See the INSTALL file for pam.conf hints. I believed I should have setup everything correctly?? why is the radius-pam-auth.so not working with the error message, * RADIUS server 10.10.150.134 failed to respond??* I have prolonged the timeout parameter from 3 seconds to 60 seconds but it did not work. If the radius server is not correctly set, it should not even pass the radtest before. But why there is no response from the radius server for freeradius-pam-auth.so if the server does work?? what could go wrong from the configurations on the pam-radius module? Please advise

5 11

accepting all the users
by John Martins 27 Jun '18

27 Jun '18

Hello, I'm new in freeradius, I installed freeeradius 3.016 and mysql, and would like to accept all the users directly. I work with Mikrotik routers. Could anybody give me a clue of how to do it? thanks!! Best Regards

3 5

Bypass Canceled Subscribers
by Guilherme Domingues 26 Jun '18

26 Jun '18

Hello, We've looking for a simple solution to bypass pppoe request from canceled subscribers. It's sounds odd, but some routers/onus from certain clients hits radius all day long, and we're think to access those devices again, by accepting their login(only CHAP) and configure this clients to DHCP networks. In alternative of it, we've seen as soluction blocking at L2, but we're working with different models of NAS and switches and other networks devices. For us is getting complicated for CHAP autentication. Someone have some idea or suggestion ? Best regards, --- "A mente que se abre a uma nova idéia jamais voltará ao seu tamanho original." Albert Einstein

2 1

Windows 10 breaks Samba/LDAP/freeradius machine credentials configuration
by Anthony Stuckey 26 Jun '18

26 Jun '18

I find it hard to believe that I'm the first person to come across this issue, but I have been unable to find anyone else with these exact questions or documentation that discusses this issue. It's easy to find a Microsoft document that discusses a problem that I don't have, it's very hard to find any document which discusses the problem I do have. https://support.microsoft.com/en-us/help/3121002/windows-10-devices-can-t-c… We use a Samba domain controller with an LDAP backend to provide account services for our organization. We have a Cisco wireless lan controller which uses freeradius to authenticate with Windows Machine Credentials. Windows 10 sends different User-Names before and after it is joined to the domain, and that causes wireless authentication to fail. Previous versions of Windows do not have this behavior, and wireless authentication works perfectly. Specifically, the User-Name attribute changes from User-Name = "host/i26171" to User-Name = "host/i26171.DOMAIN". The Samba server creates an ldap entry with the password attributes under the non-domain name, which is then not found when the credentials are presented with the domain attached. dn: uid=I26171$,ou=Machines,ou=SambaSAM,dc=domain,dc=edu uid: I26171$ uid: host/i26171 sambaSID: S-1-5-21-4128435402-3538960026-4000809499-15117 displayName: i26171$ objectClass: sambaSamAccount objectClass: account objectClass: radiusprofile sambaAcctFlags: [W ] cn: i26171 radiusFilterId: true radiusTunnelMediumType: IEEE-802 radiusTunnelType: vlan radiusTunnelPrivateGroupId: 630 sambaNTPassword: <<secret>> sambaPwdLastSet: 1526590492 Wed May 23 10:51:04 2018 : Info: [ldap] performing user authorization for host/i26171.DOMAIN Wed May 23 10:51:04 2018 : Info: [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details Wed May 23 10:51:04 2018 : Info: [ldap] ... expanding second conditional Wed May 23 10:51:04 2018 : Info: [ldap] expand: %{User-Name} -> host/i26171.DOMAIN Wed May 23 10:51:04 2018 : Info: [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=host/i26171.DOMAIN) Wed May 23 10:51:04 2018 : Info: [ldap] expand: ou=sambasam,dc=domain,dc=edu -> ou=sambasam,dc=domain,dc=edu Wed May 23 10:51:04 2018 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Wed May 23 10:51:04 2018 : Debug: [ldap] ldap_get_conn: Got Id: 0 Wed May 23 10:51:04 2018 : Debug: [ldap] performing search in ou=sambasam,dc=domain,dc=edu, with filter (uid=host/i26171.DOMAIN) Wed May 23 10:51:04 2018 : Debug: [ldap] object not found Wed May 23 10:51:04 2018 : Info: [ldap] search failed Wed May 23 10:51:04 2018 : Debug: [ldap] ldap_release_conn: Release Id: 0 Wed May 23 10:51:04 2018 : Info: ++[ldap] = notfound Has anyone else encountered this issue, and what did you do to fix it? The obvious solution is to rewrite the User-Name attribute in the freeradius configuration, but this is seriously frowned upon by the freeradius developers, for reasons which are not usually made explicit other than vague comments that it might allow a security hole. Attempts to actually do this all seem to end in various error messages and pain. Is there any known setting for Windows 10 that will cause it to act in the backwards-compatible way? Is there any documentation of why Microsoft made this change? Is this a known issue which is fixed in freeradius3/RHEL7 somehow? [root@radiusdebug /]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 6.9 (Santiago) [root@radiusdebug /]# rpm -qa | egrep -i freeradius freeradius-2.2.6-7.el6_9.x86_64 freeradius-utils-2.2.6-7.el6_9.x86_64 freeradius-ldap-2.2.6-7.el6_9.x86_64

2 1

right tutorial
by Javier Escalante 26 Jun '18

26 Jun '18

Hello, Could somebody tell us which tutorial /wiki can we follow in order to properly configure freeradius 3.0.16? Thanks in advance BR Javier Escalante Business Development Manager <mailto:Javier.escalante@bwireless.eu> Javier.escalante(a)bwireless.eu <tel:00%2034%20626%2078%2056%2075> 00 34 626 785 675 <tel:00%2034%2093%20172%2006%2074> 00 34 93 141 56 36 <tel:00%2041%2078%20689%2085%2069> 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: <http://www.bsmart.global/> www.bsmart.global <http://www.bwireless.eu/> http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de BW & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a BW & TAKACS TELECOM, S.L. con domicilio en <https://maps.google.com/?q=Camil+Oliveras,+26,+08032+Barcelona+(Espa%C3%B1a &entry=gmail&source=g> Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico <mailto:info@bwireless.eu> info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique.

11 40

tutorials
by Javier Escalante 26 Jun '18

26 Jun '18

Hello, I followed this wiki, https://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ub… In theory, following completely, and having the files exactly as the wiki indicates, it should work, right? The error is still : (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query I don't get why it is not working, and why there is not more information in Internet (2 week with it already...). Since I have no clue where to look anymore? Can anybody give me a sensible and if possible understandable clue? Thanks BR Javier Escalante Business Development Manager Javier.escalante(a)bwireless.eu 00 34 626 785 675 00 34 93 141 56 36 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: www.bsmart.global http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de B’W & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a B’W & TAKACS TELECOM, S.L. con domicilio en Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique.

2 1

Radperf
by Bassem Mettichi 26 Jun '18

26 Jun '18

hello, iam trying to make performnce tests for my freeradius server using Radperf tool but i don't know the command to send accounting and access request together at the same time, for example sending 1 accounting request than one access request, any help please? Thanks Bassem

1 0

errors
by Pedro Loupa 25 Jun '18

25 Jun '18

Hello, Following this wiki: https://wiki.freeradius.org/guide/SQL%20HOWTO#before-you-start I see that sql.conf does not exist, I edited* /etc/freeradius/3.0/mods-available/sql. Is that correct?* The line database = "mysql" does not exist either, could somebody tell me where is it? Thank you very much in advance Regards

4 5

update of freeradius 2.x to 3.015
by Pedro Loupa 25 Jun '18

25 Jun '18

Hello, I had an old version of freeradius working perfectly with sql and after updating to ubuntu 17. I get the following errors on trying to authenticate wit radtest. (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject I created a test user in radcheck for testing and I followed this tutorial; https://wiki.freeradius.org/guide/SQL%20HOWTO But I don't know how to go on, Could anybody give me a hint? Thanks in advance Best

1 0

best performance alternative using multiple virtual server to bound IP/port
by Philemon Jaomalaza 25 Jun '18

25 Jun '18

Hello Dear, I need to decide a structure of my deplyement, what the best practice and give best performance and memory usage if I want to have a separate service per client : - define multiple virtual servers with one global "listen" section IP/port for all virtual server. - define multiple virtual servers and each server has its listen section IP/port difffrent - define single virtual servers and use if ....elsif....else to select the proper sql module. One Nas will use one virtual and server It can have more than 50 NAS and arround 20 to 50 simultanews connexion by NAS. Philemon Jaomalaza

2 2

Large Deployment advice. 10000 users
by Uchenna Nebedum 25 Jun '18

25 Jun '18

Good Day all, If i wanted to use freeRADIUS to manage about 100 NAS each with about 1000 users, could i use a single server for all the NAS, if yes, what spec of server. And would MySQL still be the best database to use considering performance or would Redis be better. And what would be the best configurations. Please i need advice. Thanks a lot for any help.

2 2

Apache client certificat To freeradiis
by vince technical address 25 Jun '18

25 Jun '18

Hi, Is it possible to send client certificate to à freeradius server by apache. I would like to manage authentication by radius only. No way to do something like 802.1x with radius and apache and navigator ? Tanks. Vince

2 3

User-Password
by Javier Escalante 25 Jun '18

25 Jun '18

Hello, Could it be correct? http://freeradius.1045715.n5.nabble.com/ISSUE-Authentication-will-fail-unle… If so? Where should I change it? Thanks BR Javier Escalante Business Development Manager Javier.escalante(a)bwireless.eu 00 34 626 785 675 00 34 93 141 56 36 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: www.bsmart.global http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de B’W & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a B’W & TAKACS TELECOM, S.L. con domicilio en Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique. -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+javier.escalante=bwireless.eu@lists.freeradius.org] On Behalf Of Javier Escalante Sent: domingo, 24 de junio de 2018 15:57 To: 'FreeRadius users mailing list' Subject: RE: right tutorial Hello, Sorry guys, based on the answers of Alan, I might be stupid...I'll explain another time and I hope this time I get some help: 1. I installed a fresh server (I have my all server already configured and working since 4 years) 2. I installed freeradius 3.0.16 and mysql. No errors during installation 3. I tested with user and password in file, and it worked perfectly 4. I tested by putting the user test with password test in radcheck and the authentication failed as it is shown further down. 5. I have searched in all kind of forums and obviously also in www.freeradius.org. No solution yet. 6. The sql seems to be working despite the include line is not uncommented in radiusd.conf. Can somebody confirm? Can anybody give me a clue of how to solve this problem? Request: radtest test test localhost 10 1107 Freeradius debug output: Ready to process requests (0) Received Access-Request Id 195 from 127.0.0.1:37474 to 127.0.0.1:1812 length 74 (0) User-Name = "test" (0) User-Password = "test" (0) NAS-IP-Address = 5.135.246.127 (0) NAS-Port = 10 (0) Message-Authenticator = 0x05270c450007175556849d0b38cc7a27 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/de fault (0) authorize { (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "test", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' rlm_sql (sql): Reserved connection (0) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = 'test' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User- Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE userna me = 'test' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth -Type (0) pap: WARNING: Authentication will fail unless a "known good" password is ava ilable (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet- Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', 'test', 'Access-Reject', '2018-06-24 13:55:21') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authda te) VALUES ( 'test', 'test', 'Access-Reject', '2018-06-24 13:55:21') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> test (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 195 from 127.0.0.1:1812 to 127.0.0.1:37474 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 195 with timestamp +2 Ready to process requests Thanks in advance BR Javier Escalante Business Development Manager Javier.escalante(a)bwireless.eu 00 34 626 785 675 00 34 93 141 56 36 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: www.bsmart.global http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de B’W & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a B’W & TAKACS TELECOM, S.L. con domicilio en Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique. -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+javier.escalante=bwireless.eu@lists.freeradius.org] On Behalf Of Alan Buxey Sent: viernes, 22 de junio de 2018 20:06 To: FreeRadius users mailing list Subject: Re: right tutorial hi, Could somebody tell us which tutorial /wiki can we follow in order to > properly configure freeradius 3.0.16? > properly configure? you need to define what it is you are trying to do. based on other replies there is history here that I havent seen (or deleted amongst deluge of other posts) one persons requirement/use-case rarely matches with another. take FreeRADIUS 3.0.16 - either built form source or via package. then follow the guides (or read the docs in the config files themselves) as required. DONT hack a load of the config around , start with basics (as per docs) alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

3 10

RE: Large Deployment advice. 10000 users
by Angel Elena 25 Jun '18

25 Jun '18

1) bbdd tunning if your setup is mysql, create tables as innodb, or setup percona. Define buffers, etc... https://www.linode.com/docs/databases/mysql/how-to-optimize-mysql-performan… tune linux kernel also, like swap file location, file descriptors ... google is your friend. 3) tunning freeradius config read radius.conf file and adapt to your setup. -------------------------------- Ángel Elena Medina _o) craem(a)craem.net / \\ http://blog.craem.net _(___V @craem_ www.linkedin.com/in/angel-elena-medina -------------------------------- Zarafa Webapp. -----Mensaje original----- De: Uchenna Nebedum <nebeduch(a)gmail.com> Enviado: Lun 25-06-2018 11:32 Asunto: Re: Large Deployment advice. 10000 users Para: FreeRadius users mailing list <Freeradius-Users(a)lists.freeradius.org>; > Wow, 10000 is little FreeRADIUS is a lot more powerful than i thought, can > you be more specific about the tunings? Like what exactly? > > On Mon, Jun 25, 2018, 10:28 Angel Elena <craem(a)craem.net> wrote: > > > 10k users it's a little deploy. > > > > your performance depends only: > > > > 1) bbdd tunning (mysql - postgree) > > 2) Operating system tunning (file descriptors, etc...) > > 3) split radius server and bbdd servers > > 4) tunning freeradius config. > > > > > > > > > > > > > > > > -------------------------------- > > Ángel Elena Medina _o) > > craem(a)craem.net / \\ > > http://blog.craem.net _(___V > > @craem_ > > www.linkedin.com/in/angel-elena-medina > > -------------------------------- > > Zarafa Webapp. > > > > -----Mensaje original----- > > De: Uchenna Nebedum <nebeduch(a)gmail.com> > > Enviado: Lun 25-06-2018 11:21 > > Asunto: Large Deployment advice. 10000 users > > Para: FreeRadius users mailing list < > > Freeradius-Users(a)lists.freeradius.org>; > > > Good Day all, > > > > > > If i wanted to use freeRADIUS to manage about 100 NAS each with about > > > 1000 users, could i use a single server for all the NAS, if yes, what > > spec > > > of server. And would MySQL still be the best database to use considering > > > performance or would Redis be better. And what would be the best > > > configurations. > > > > > > Please i need advice. Thanks a lot for any help. > > > - > > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

RE: Large Deployment advice. 10000 users
by Angel Elena 25 Jun '18

25 Jun '18

10k users it's a little deploy. your performance depends only: 1) bbdd tunning (mysql - postgree) 2) Operating system tunning (file descriptors, etc...) 3) split radius server and bbdd servers 4) tunning freeradius config. -------------------------------- Ángel Elena Medina _o) craem(a)craem.net / \\ http://blog.craem.net _(___V @craem_ www.linkedin.com/in/angel-elena-medina -------------------------------- Zarafa Webapp. -----Mensaje original----- De: Uchenna Nebedum <nebeduch(a)gmail.com> Enviado: Lun 25-06-2018 11:21 Asunto: Large Deployment advice. 10000 users Para: FreeRadius users mailing list <Freeradius-Users(a)lists.freeradius.org>; > Good Day all, > > If i wanted to use freeRADIUS to manage about 100 NAS each with about > 1000 users, could i use a single server for all the NAS, if yes, what spec > of server. And would MySQL still be the best database to use considering > performance or would Redis be better. And what would be the best > configurations. > > Please i need advice. Thanks a lot for any help. > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

Freeradius realm using multiple sql and virtual server
by Philemon Jaomalaza 24 Jun '18

24 Jun '18

Hello Dear, On the same server where Freeradius 3 is installed, I would like to have more instance of sql for each NAS to use its virtual server and its database. I do not know if it's a good idea but that's what I did: - in proxy.conf ..................... ....................... realm mydomaintest.com { auth_pool = my_auth_failover virtual_server = mydomaintest.com } - I then created a module sql1 which is confgured for the database "radius1" from the sql module template in /freeradius/3.0/mods-available/ and linked in /freeradius/3.0/mods-enabled/ sql sql1 { driver = "rlm_sql_mysql" ....................... ....................... pool = sql ...................... group_attribute = "$ {.: instance} -SQL-Group" # This entry should be used for the default instance (sql {}) # of the SQL module. # group_attribute = "SQL-Group" ...................................... ..................................... etc. } - in /freeradius/3.0/sites-available/ I created a mydomaintest.com virtual server from the deflaut.conf template and linked it to /freeradius/3.0/sites-enabled/ and I changed all the words "sql" by default to "sql1": server mydomaintest.com { authorize { ........................... sql1 ........................... } authenticate { # all default content } # etc. } The problems now when I try to authenticate like user(a)mydomaintest.com, he sees realm "mydomaintest.com" and Stripped the username in "user" but he does not try to use it in the database " radius1 "but always in sql the database" radius "of the blow it does not find the user and that gives Access-Reject. Where should I have made a mistake? What is the best trick to make this feature? Philemon Jaomalaza Tél. : +261 (0) 32 05 113 26 Email : <mailto:philemon.jaomalaza@gmail.com> philemon.jaomalaza(a)gmail.com

3 13

Stripping the calling station id
by Kefi Ammar . 22 Jun '18

22 Jun '18

Hello, Could someone help me to strip the calling station id recieved in the request to use it later for the checkval module. I am applying the mac authentication using checkval but the problem is that I am recieving a long calling station id containing the mac address. this is an exemple of the calling station id recieved : lag-50:1201.0#BNG Kasbah###pppoe 94:a7:b7:3e:93:5b# its always in this format and I only want to extract the mac address from it. I dont know if it can be achieved using unlang or anything else.

3 14

Errors in configuring sqlcounter with FreeRADIUS
by Rohith Asrk 22 Jun '18

22 Jun '18

Hi everyone, I'm working on the django-freeradius <https://github.com/openwisp/django-freeradius/> project and trying to enforce session limits on users using the web interface. To accomplish that I'm using the rlm_sqlcounter module of FreeRADIUS. When trying to configure sqlcounter module with FreeRADIUS I'm facing the errors as below. including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/sqlcounter /etc/freeradius/mods-enabled/sqlcounter[43]: Reference "${modules.sql.dialect}" not found /etc/freeradius/mods-enabled/sqlcounter[52]: Reference "${modconfdir}/sql/counter/${dialect}/${.:instance}.conf" points to a variable which has not been expanded. Errors reading or parsing /etc/freeradius/radiusd.conf I think FreeRADIUS is trying to load the sqlcounter module before sql module and therefore this errors. I've tried using the instantiate section as well but couldn't configure it properly. I've tried checking out the previous threads and with people having the same issues too but couldn't help myself. Any leads would be appreciated. Thank you, Rohith ASRK

2 3

installtion of freeradius
by Javier Escalante 21 Jun '18

21 Jun '18

Hello, I have installed a brand new machine and freeradius following the steps below: 1. apt-get -y update 2. apt-get -y dist-upgrade 3. apt-get install freeradius-mysql freeradius After installation, I dont see the sql folderAnd the schema.sql. . Could anybody tell me why? Thanks in advance BR Javier Escalante Business Development Manager <mailto:Javier.escalante@bwireless.eu> Javier.escalante(a)bwireless.eu <tel:00%2034%20626%2078%2056%2075> 00 34 626 785 675 <tel:00%2034%2093%20172%2006%2074> 00 34 93 141 56 36 <tel:00%2041%2078%20689%2085%2069> 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: <http://www.bsmart.global/> www.bsmart.global <http://www.bwireless.eu/> http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de BW & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a BW & TAKACS TELECOM, S.L. con domicilio en <https://maps.google.com/?q=Camil+Oliveras,+26,+08032+Barcelona+(Espa%C3%B1a &entry=gmail&source=g> Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico <mailto:info@bwireless.eu> info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique.

7 21

Confirming understanding of the rlm_rest module
by Andris Bjornson 21 Jun '18

21 Jun '18

I'm looking into options for integrating freeradius with my own external software. I see that there is the rlm_rest module - from reviewing it's docs, I believe I understand that this would allow me to have my freeradius server(s) relay auth and/or accounting requests to my own external systems by calling api endpoints on the external systems. I believe I understand there is no native ability in freeradius to expose its own HTTP endpoint that external systems could call to do things like add/modify/delete users and trigger freeradius CoA requests. Is this correct? Thanks for your help! Andris --- Andris Bjornson | EveryLayer <http://www.everylayer.com/> skype: andris.bjornson

2 1

TLS-EAP with Yubikey module
by Jeroen van Kessel 21 Jun '18

21 Jun '18

I am trying to setup FreeRADIUS 3.0.12 ARM (Pi3) with Yubikeys to authenticate on the 802.1X TP-Link EAP245 access point. Installed: latest raspbian, freeradius plus freeradius-yubikey Local radtest authentication works through PAP. However, the access point is establishing an TLS-EAP connection with FreeRADIUS. The YubiKey does not process the YubiKey one time password according to the debugger: (1) yubikey: No cleartext password in the request. Can't do Yubikey authentication Is TLS-EAP supported with the YubiKey module on freeRADIUS? If so, what am I doing wrong? My users file: #yubikey with public key: ccccccieedid bob Cleartext-Password := "ccccccieedid" test1 Cleartext-Password := "test" DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP #================================================= My default file: authorize { filter_username # filter_password preprocess # operator-name # cui # auth_log #chap #mschap digest suffix eap { ok = return } yubikey if (ok) { update control { Auth-Type := yubikey } } files expiration logintime #pap } authenticate { Auth-Type yubikey { yubikey update request { User-Password := Yubikey-Public-ID } } Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } mschap digest # pam eap } #================================================= My live debugger: root@freeradius-pi:/etc/freeradius/3.0/mods-enabled# freeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/yubikey including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/unpack including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/control including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client AP245 { ipaddr = 192.168.1.220 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = yubikey # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_yubikey # Loading module "yubikey" from file /etc/freeradius/3.0/mods-enabled/yubikey yubikey { id_length = 12 split = yes decrypt = no validate = no validation { } } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack instantiate { } # Instantiating module "yubikey" from file /etc/freeradius/3.0/mods-enabled/yubikey # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43092 Listening on proxy address :: port 51591 Ready to process requests (0) Received Access-Request Id 217 from 192.168.1.220:43765 to 192.168.1.230:1812 length 152 (0) User-Name = "bob" (0) NAS-IP-Address = 192.168.1.220 (0) NAS-Port = 0 (0) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (0) Calling-Station-Id = "8C-85-90-A8-C0-6E" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11" (0) EAP-Message = 0x0200000b016a65726f656e (0) Message-Authenticator = 0x187242c265423010098b1dd44a542a7b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bob", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xc367d10bc366d579 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 217 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (0) EAP-Message = 0x010100160410efd47310b444f51d36fd4af8c3411bee (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc367d10bc366d5792e0989a8d4d88e1e (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 218 from 192.168.1.220:43765 to 192.168.1.230:1812 length 167 (1) User-Name = "bob" (1) NAS-IP-Address = 192.168.1.220 (1) NAS-Port = 0 (1) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (1) Calling-Station-Id = "8C-85-90-A8-C0-6E" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11" (1) EAP-Message = 0x020100080319152b (1) State = 0xc367d10bc366d5792e0989a8d4d88e1e (1) Message-Authenticator = 0xa9f13606abb57992b96e5f45040f9465 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) yubikey: No cleartext password in the request. Can't do Yubikey authentication (1) [yubikey] = noop (1) if (ok) { (1) if (ok) -> FALSE (1) files: users: Matched entry bob at line 1 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc367d10bc366d579 (1) eap: Finished EAP session with state 0xc367d10bc366d579 (1) eap: Previous EAP request found for state 0xc367d10bc366d579, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0xc367d10bc265c879 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 218 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc367d10bc265c8792e0989a8d4d88e1e (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 219 from 192.168.1.220:43765 to 192.168.1.230:1812 length 320 (2) User-Name = "bob" (2) NAS-IP-Address = 192.168.1.220 (2) NAS-Port = 0 (2) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (2) Calling-Station-Id = "8C-85-90-A8-C0-6E" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11" (2) EAP-Message = 0x020200a119800000009716030100920100008e03035b055bf0de12e44319f8c94a4cb061018a5621fd60d6ee02f2a9a7216507505600002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (2) State = 0xc367d10bc265c8792e0989a8d4d88e1e (2) Message-Authenticator = 0x6327dc962c74431a5923aeb8e6e2b6da (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bob", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc367d10bc265c879 (2) eap: Finished EAP session with state 0xc367d10bc265c879 (2) eap: Previous EAP request found for state 0xc367d10bc265c879, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv TLS 1.2 [length 0092] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 02e2] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0xc367d10bc164c879 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 219 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (2) EAP-Message = 0x010303ec19c000000484160303003d020000390303ef1f266c966e8b6d64140af4dc0d927661c07fd4746c518e7f5e6a1f724411dc00c030000011ff01000100000b0004030001020017000016030302e20b0002de0002db0002d8308202d4308201bca003020102020900af5948c5fd79d5ac300d0609 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc367d10bc164c8792e0989a8d4d88e1e (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 220 from 192.168.1.220:43765 to 192.168.1.230:1812 length 165 (3) User-Name = "bob" (3) NAS-IP-Address = 192.168.1.220 (3) NAS-Port = 0 (3) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (3) Calling-Station-Id = "8C-85-90-A8-C0-6E" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11" (3) EAP-Message = 0x020300061900 (3) State = 0xc367d10bc164c8792e0989a8d4d88e1e (3) Message-Authenticator = 0x80f9b034e072238b5239f0657c66cffe (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bob", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc367d10bc164c879 (3) eap: Finished EAP session with state 0xc367d10bc164c879 (3) eap: Previous EAP request found for state 0xc367d10bc164c879, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 168 (3) eap: EAP session adding &reply:State = 0xc367d10bc063c879 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 220 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (3) EAP-Message = 0x010400a81900b7ee194d71afcb438932f084b3db961ba5180a0a09ba15d4028b5f0078b7d4d4a674893db7a05cd3b5025a6dd28ae2db976066ab0e6b141c473e2570b01055e8cf1ba7ef883d2fe58654eaae61a8357e3b5b1b27189aeb300dcad624d7be1f3f0c63e27bf4541a35b5e0c94e2a1bc78675 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc367d10bc063c8792e0989a8d4d88e1e (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 230 from 192.168.1.220:43765 to 192.168.1.230:1812 length 295 (4) User-Name = "bob" (4) NAS-IP-Address = 192.168.1.220 (4) NAS-Port = 0 (4) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (4) Calling-Station-Id = "8C-85-90-A8-C0-6E" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11" (4) EAP-Message = 0x0204008819800000007e1603030046100000424104c1348ae85a7b9c35285ee9de09bd8df286a625d7adbe9601c5480bc49872acf809966ef471460e2951219bc4ec94fd4868c0ed4e463cf7560174cd9871d5a95c1403030001011603030028891bb4db5211941689ec2eebfd7d27ca7b7a0d20c61413 (4) State = 0xd3cc6da3d0c87425cf3878ed885e48c2 (4) Message-Authenticator = 0xba4c3ab961e6b0e12a1f3b37ebb335cb (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xd3cc6da3d0c87425 (4) eap: Finished EAP session with state 0xd3cc6da3d0c87425 (4) eap: Previous EAP request found for state 0xd3cc6da3d0c87425, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 57 (4) eap: EAP session adding &reply:State = 0xd3cc6da3d7c97425 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 230 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (4) EAP-Message = 0x0105003919001403030001011603030028ef42c5e91f9fb714e27c582a8d3bec5bb6f255596323322538a5bba7c85af3b15c10acdf382f7256 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xd3cc6da3d7c97425cf3878ed885e48c2 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 231 from 192.168.1.220:43765 to 192.168.1.230:1812 length 165 (5) User-Name = "bob" (5) NAS-IP-Address = 192.168.1.220 (5) NAS-Port = 0 (5) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (5) Calling-Station-Id = "8C-85-90-A8-C0-6E" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11" (5) EAP-Message = 0x020500061900 (5) State = 0xd3cc6da3d7c97425cf3878ed885e48c2 (5) Message-Authenticator = 0x13d654deee955259ba06ba198f4f4447 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xd3cc6da3d7c97425 (5) eap: Finished EAP session with state 0xd3cc6da3d7c97425 (5) eap: Previous EAP request found for state 0xd3cc6da3d7c97425, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 6 length 40 (5) eap: EAP session adding &reply:State = 0xd3cc6da3d6ca7425 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 231 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (5) EAP-Message = 0x010600281900170303001def42c5e91f9fb715aa6f88a699290320723c0cf9a3450d76b3c23a24c5 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xd3cc6da3d6ca7425cf3878ed885e48c2 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 232 from 192.168.1.220:43765 to 192.168.1.230:1812 length 201 (6) User-Name = "bob" (6) NAS-IP-Address = 192.168.1.220 (6) NAS-Port = 0 (6) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (6) Calling-Station-Id = "8C-85-90-A8-C0-6E" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11" (6) EAP-Message = 0x0206002a1900170303001f891bb4db521194172867fe4e3c9a7f984658adb9952a806965f50144812481 (6) State = 0xd3cc6da3d6ca7425cf3878ed885e48c2 (6) Message-Authenticator = 0x145bef7a064d8f40db7ffcc4f9b49cc0 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 42 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xd3cc6da3d6ca7425 (6) eap: Finished EAP session with state 0xd3cc6da3d6ca7425 (6) eap: Previous EAP request found for state 0xd3cc6da3d6ca7425, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bob (6) eap_peap: Got inner identity 'bob' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0206000b016a65726f656e (6) eap_peap: Setting User-Name to bob (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0206000b016a65726f656e (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "bob" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0206000b016a65726f656e (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bob" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 43 (6) eap: EAP session adding &reply:State = 0x305cf110305beb4f (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 74 (6) eap: EAP session adding &reply:State = 0xd3cc6da3d5cb7425 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 232 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (6) EAP-Message = 0x0107004a1900170303003fef42c5e91f9fb71695db7c7f75733b4dd45c25e544d4501e1b912f822d0f1f79f494c7badbc0a0476a9bf1dd09486f80306859d6df798311f07dab8d3ca7c3 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xd3cc6da3d5cb7425cf3878ed885e48c2 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 233 from 192.168.1.220:43765 to 192.168.1.230:1812 length 255 (7) User-Name = "bob" (7) NAS-IP-Address = 192.168.1.220 (7) NAS-Port = 0 (7) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (7) Calling-Station-Id = "8C-85-90-A8-C0-6E" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11" (7) EAP-Message = 0x0207006019001703030055891bb4db5211941853b0ca4d500ace97e925171127b41192a42c1fb0d0ae6aceaf4b30748b6efd94ae7801e0f20ffffb98699f8746c64a52a2501e3501ee5c8f582d7dd27ed46281e45306e4ee9adadd833dab64a9 (7) State = 0xd3cc6da3d5cb7425cf3878ed885e48c2 (7) Message-Authenticator = 0xa1d8ff90bd51408bdc96a66a0aa42f69 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 96 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x305cf110305beb4f (7) eap: Finished EAP session with state 0xd3cc6da3d5cb7425 (7) eap: Previous EAP request found for state 0xd3cc6da3d5cb7425, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) eap_peap: Setting User-Name to bob (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "bob" (7) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "bob" (7) State = 0x305cf110305beb4ff93560a881317c76 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 65 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry bob at line 1 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x305cf110305beb4f (7) eap: Finished EAP session with state 0x305cf110305beb4f (7) eap: Previous EAP request found for state 0x305cf110305beb4f, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Found Cleartext-Password, hashing to create LM-Password (7) mschap: Creating challenge hash with username: bob (7) mschap: Client is using MS-CHAPv2 (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) [mschap] = reject (7) } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 7 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> bob (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) EAP-Message = 0x04070004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 8 length 46 (7) eap: EAP session adding &reply:State = 0xd3cc6da3d4c47425 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) session-state: Saving cached attributes (7) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (7) Sent Access-Challenge Id 233 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (7) EAP-Message = 0x0108002e19001703030023ef42c5e91f9fb71721d27ee74986932a13cac4fe3facf2bdf9fc377fb741ad2e107871 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xd3cc6da3d4c47425cf3878ed885e48c2 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 234 from 192.168.1.220:43765 to 192.168.1.230:1812 length 205 (8) User-Name = "bob" (8) NAS-IP-Address = 192.168.1.220 (8) NAS-Port = 0 (8) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (8) Calling-Station-Id = "8C-85-90-A8-C0-6E" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11" (8) EAP-Message = 0x0208002e19001703030023891bb4db521194193daa0dfba788033a3d2c11ae997ade3d49b3f979847e44e4e76444 (8) State = 0xd3cc6da3d4c47425cf3878ed885e48c2 (8) Message-Authenticator = 0x645cdf7a82da45c1562f4cf981523af5 (8) Restoring &session-state (8) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xd3cc6da3d4c47425 (8) eap: Finished EAP session with state 0xd3cc6da3d4c47425 (8) eap: Previous EAP request found for state 0xd3cc6da3d4c47425, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 8 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> bob (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 234 from 192.168.1.230:1812 to 192.168.1.220:43765 length 44 (8) EAP-Message = 0x04080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 226 with timestamp +31 (1) Cleaning up request packet ID 227 with timestamp +31 (2) Cleaning up request packet ID 228 with timestamp +31 (3) Cleaning up request packet ID 229 with timestamp +31 (4) Cleaning up request packet ID 230 with timestamp +31 (5) Cleaning up request packet ID 231 with timestamp +31 (6) Cleaning up request packet ID 232 with timestamp +31 (7) Cleaning up request packet ID 233 with timestamp +31 (8) Cleaning up request packet ID 234 with timestamp +31 Ready to process requests Kind regards!

7 10

network radius rpm for centos
by Kacper Wirski 21 Jun '18

21 Jun '18

Hello, I have a few successfull freeradius installation on Centos 7. So far I've been using either RPM from centos repositories or self-compiled. This time I wanted to try RPM from network radius. I've added keys and repos based on the information found on network radius site (https://networkradius.com/freeradius-packages/index.html) but unfortunately "yum" didn't want to install freeradius packages, because it returned error "package is not signed". Same error was for all freeradius packages. Key is imported correctly (I can see it with rpm -q gpg-pubkey-........ output of "rpm -qi gpg-pubkey-<number>" seems fine on the first glance: Name : gpg-pubkey Version : 41382202 Release : 540df604 Architecture: (none) Install Date: Mon 18 Jun 2018 11:39:29 AM CEST Group : Public Keys Size : 0 License : pubkey Signature : (none) Source RPM : (none) Build Date : Mon 08 Sep 2014 08:31:32 PM CEST Build Host : localhost Relocations : (not relocatable) Packager : Network RADIUS Support (package signing) <packages(a)networkradius.com> Summary : gpg(Network RADIUS Support (package signing) <packages(a)networkradius.com>) Description : When verifying package (rpm -K freeradius........rpm) I don't see gpg verification freeradius-3.0.17-2.el7.centos.x86_64.rpm: sha1 md5 OK Can anyone on the mailing list comment on this issue? Are packages not being signed on purpose? Regards, Kacper

1 0

User/Password
by jandersen＠gocom.ca 20 Jun '18

20 Jun '18

Hi I am a beginner My radius was transferred from an old server. I don't know how to add a new user and I don't know where user/passwords are stored - directory/folder/name. My radius rejects all request for authentication. I want to add a new user, so I can test on a user I know is there. What program to use or where is the data base file with the user/passwords? J.Andersen

2 1