June 2018 - Freeradius-Users - lists.freeradius.org

RE: Large Deployment advice. 10000 users
by Angel Elena 25 Jun '18

25 Jun '18

1) bbdd tunning if your setup is mysql, create tables as innodb, or setup percona. Define buffers, etc... https://www.linode.com/docs/databases/mysql/how-to-optimize-mysql-performan… tune linux kernel also, like swap file location, file descriptors ... google is your friend. 3) tunning freeradius config read radius.conf file and adapt to your setup. -------------------------------- Ángel Elena Medina _o) craem(a)craem.net / \\ http://blog.craem.net _(___V @craem_ www.linkedin.com/in/angel-elena-medina -------------------------------- Zarafa Webapp. -----Mensaje original----- De: Uchenna Nebedum <nebeduch(a)gmail.com> Enviado: Lun 25-06-2018 11:32 Asunto: Re: Large Deployment advice. 10000 users Para: FreeRadius users mailing list <Freeradius-Users(a)lists.freeradius.org>; > Wow, 10000 is little FreeRADIUS is a lot more powerful than i thought, can > you be more specific about the tunings? Like what exactly? > > On Mon, Jun 25, 2018, 10:28 Angel Elena <craem(a)craem.net> wrote: > > > 10k users it's a little deploy. > > > > your performance depends only: > > > > 1) bbdd tunning (mysql - postgree) > > 2) Operating system tunning (file descriptors, etc...) > > 3) split radius server and bbdd servers > > 4) tunning freeradius config. > > > > > > > > > > > > > > > > -------------------------------- > > Ángel Elena Medina _o) > > craem(a)craem.net / \\ > > http://blog.craem.net _(___V > > @craem_ > > www.linkedin.com/in/angel-elena-medina > > -------------------------------- > > Zarafa Webapp. > > > > -----Mensaje original----- > > De: Uchenna Nebedum <nebeduch(a)gmail.com> > > Enviado: Lun 25-06-2018 11:21 > > Asunto: Large Deployment advice. 10000 users > > Para: FreeRadius users mailing list < > > Freeradius-Users(a)lists.freeradius.org>; > > > Good Day all, > > > > > > If i wanted to use freeRADIUS to manage about 100 NAS each with about > > > 1000 users, could i use a single server for all the NAS, if yes, what > > spec > > > of server. And would MySQL still be the best database to use considering > > > performance or would Redis be better. And what would be the best > > > configurations. > > > > > > Please i need advice. Thanks a lot for any help. > > > - > > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

RE: Large Deployment advice. 10000 users
by Angel Elena 25 Jun '18

25 Jun '18

10k users it's a little deploy. your performance depends only: 1) bbdd tunning (mysql - postgree) 2) Operating system tunning (file descriptors, etc...) 3) split radius server and bbdd servers 4) tunning freeradius config. -------------------------------- Ángel Elena Medina _o) craem(a)craem.net / \\ http://blog.craem.net _(___V @craem_ www.linkedin.com/in/angel-elena-medina -------------------------------- Zarafa Webapp. -----Mensaje original----- De: Uchenna Nebedum <nebeduch(a)gmail.com> Enviado: Lun 25-06-2018 11:21 Asunto: Large Deployment advice. 10000 users Para: FreeRadius users mailing list <Freeradius-Users(a)lists.freeradius.org>; > Good Day all, > > If i wanted to use freeRADIUS to manage about 100 NAS each with about > 1000 users, could i use a single server for all the NAS, if yes, what spec > of server. And would MySQL still be the best database to use considering > performance or would Redis be better. And what would be the best > configurations. > > Please i need advice. Thanks a lot for any help. > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

Freeradius realm using multiple sql and virtual server
by Philemon Jaomalaza 24 Jun '18

24 Jun '18

Hello Dear, On the same server where Freeradius 3 is installed, I would like to have more instance of sql for each NAS to use its virtual server and its database. I do not know if it's a good idea but that's what I did: - in proxy.conf ..................... ....................... realm mydomaintest.com { auth_pool = my_auth_failover virtual_server = mydomaintest.com } - I then created a module sql1 which is confgured for the database "radius1" from the sql module template in /freeradius/3.0/mods-available/ and linked in /freeradius/3.0/mods-enabled/ sql sql1 { driver = "rlm_sql_mysql" ....................... ....................... pool = sql ...................... group_attribute = "$ {.: instance} -SQL-Group" # This entry should be used for the default instance (sql {}) # of the SQL module. # group_attribute = "SQL-Group" ...................................... ..................................... etc. } - in /freeradius/3.0/sites-available/ I created a mydomaintest.com virtual server from the deflaut.conf template and linked it to /freeradius/3.0/sites-enabled/ and I changed all the words "sql" by default to "sql1": server mydomaintest.com { authorize { ........................... sql1 ........................... } authenticate { # all default content } # etc. } The problems now when I try to authenticate like user(a)mydomaintest.com, he sees realm "mydomaintest.com" and Stripped the username in "user" but he does not try to use it in the database " radius1 "but always in sql the database" radius "of the blow it does not find the user and that gives Access-Reject. Where should I have made a mistake? What is the best trick to make this feature? Philemon Jaomalaza Tél. : +261 (0) 32 05 113 26 Email : <mailto:philemon.jaomalaza@gmail.com> philemon.jaomalaza(a)gmail.com

3 13

Stripping the calling station id
by Kefi Ammar . 22 Jun '18

22 Jun '18

Hello, Could someone help me to strip the calling station id recieved in the request to use it later for the checkval module. I am applying the mac authentication using checkval but the problem is that I am recieving a long calling station id containing the mac address. this is an exemple of the calling station id recieved : lag-50:1201.0#BNG Kasbah###pppoe 94:a7:b7:3e:93:5b# its always in this format and I only want to extract the mac address from it. I dont know if it can be achieved using unlang or anything else.

3 14

Errors in configuring sqlcounter with FreeRADIUS
by Rohith Asrk 22 Jun '18

22 Jun '18

Hi everyone, I'm working on the django-freeradius <https://github.com/openwisp/django-freeradius/> project and trying to enforce session limits on users using the web interface. To accomplish that I'm using the rlm_sqlcounter module of FreeRADIUS. When trying to configure sqlcounter module with FreeRADIUS I'm facing the errors as below. including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/sqlcounter /etc/freeradius/mods-enabled/sqlcounter[43]: Reference "${modules.sql.dialect}" not found /etc/freeradius/mods-enabled/sqlcounter[52]: Reference "${modconfdir}/sql/counter/${dialect}/${.:instance}.conf" points to a variable which has not been expanded. Errors reading or parsing /etc/freeradius/radiusd.conf I think FreeRADIUS is trying to load the sqlcounter module before sql module and therefore this errors. I've tried using the instantiate section as well but couldn't configure it properly. I've tried checking out the previous threads and with people having the same issues too but couldn't help myself. Any leads would be appreciated. Thank you, Rohith ASRK

2 3

installtion of freeradius
by Javier Escalante 21 Jun '18

21 Jun '18

Hello, I have installed a brand new machine and freeradius following the steps below: 1. apt-get -y update 2. apt-get -y dist-upgrade 3. apt-get install freeradius-mysql freeradius After installation, I dont see the sql folderAnd the schema.sql. . Could anybody tell me why? Thanks in advance BR Javier Escalante Business Development Manager <mailto:Javier.escalante@bwireless.eu> Javier.escalante(a)bwireless.eu <tel:00%2034%20626%2078%2056%2075> 00 34 626 785 675 <tel:00%2034%2093%20172%2006%2074> 00 34 93 141 56 36 <tel:00%2041%2078%20689%2085%2069> 00 41 78 689 85 69 Skype: fruiz002 Do you know our IoT solutions? Have a look here: <http://www.bsmart.global/> www.bsmart.global <http://www.bwireless.eu/> http://www.bwireless.eu Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal, se informa que todos los datos personales que nos ha facilitado serán incorporados y tratados en los ficheros de BW & TAKACS TELECOM, S.L. para las finalidades de su e-mail. Puede ejercer sus derechos de acceso, rectificación, cancelación y oposición mediante una comunicación a BW & TAKACS TELECOM, S.L. con domicilio en <https://maps.google.com/?q=Camil+Oliveras,+26,+08032+Barcelona+(Espa%C3%B1a &entry=gmail&source=g> Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante una comunicación a la dirección de correo electrónico <mailto:info@bwireless.eu> info(a)bwireless.eu. En ambos casos, deberá acompañar una copia de su documento nacional de identidad o documento válido que lo identifique.

7 21

Confirming understanding of the rlm_rest module
by Andris Bjornson 21 Jun '18

21 Jun '18

I'm looking into options for integrating freeradius with my own external software. I see that there is the rlm_rest module - from reviewing it's docs, I believe I understand that this would allow me to have my freeradius server(s) relay auth and/or accounting requests to my own external systems by calling api endpoints on the external systems. I believe I understand there is no native ability in freeradius to expose its own HTTP endpoint that external systems could call to do things like add/modify/delete users and trigger freeradius CoA requests. Is this correct? Thanks for your help! Andris --- Andris Bjornson | EveryLayer <http://www.everylayer.com/> skype: andris.bjornson

2 1

TLS-EAP with Yubikey module
by Jeroen van Kessel 21 Jun '18

21 Jun '18

I am trying to setup FreeRADIUS 3.0.12 ARM (Pi3) with Yubikeys to authenticate on the 802.1X TP-Link EAP245 access point. Installed: latest raspbian, freeradius plus freeradius-yubikey Local radtest authentication works through PAP. However, the access point is establishing an TLS-EAP connection with FreeRADIUS. The YubiKey does not process the YubiKey one time password according to the debugger: (1) yubikey: No cleartext password in the request. Can't do Yubikey authentication Is TLS-EAP supported with the YubiKey module on freeRADIUS? If so, what am I doing wrong? My users file: #yubikey with public key: ccccccieedid bob Cleartext-Password := "ccccccieedid" test1 Cleartext-Password := "test" DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP #================================================= My default file: authorize { filter_username # filter_password preprocess # operator-name # cui # auth_log #chap #mschap digest suffix eap { ok = return } yubikey if (ok) { update control { Auth-Type := yubikey } } files expiration logintime #pap } authenticate { Auth-Type yubikey { yubikey update request { User-Password := Yubikey-Public-ID } } Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } mschap digest # pam eap } #================================================= My live debugger: root@freeradius-pi:/etc/freeradius/3.0/mods-enabled# freeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/yubikey including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/unpack including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/control including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client AP245 { ipaddr = 192.168.1.220 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = yubikey # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_yubikey # Loading module "yubikey" from file /etc/freeradius/3.0/mods-enabled/yubikey yubikey { id_length = 12 split = yes decrypt = no validate = no validation { } } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack instantiate { } # Instantiating module "yubikey" from file /etc/freeradius/3.0/mods-enabled/yubikey # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43092 Listening on proxy address :: port 51591 Ready to process requests (0) Received Access-Request Id 217 from 192.168.1.220:43765 to 192.168.1.230:1812 length 152 (0) User-Name = "bob" (0) NAS-IP-Address = 192.168.1.220 (0) NAS-Port = 0 (0) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (0) Calling-Station-Id = "8C-85-90-A8-C0-6E" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11" (0) EAP-Message = 0x0200000b016a65726f656e (0) Message-Authenticator = 0x187242c265423010098b1dd44a542a7b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bob", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xc367d10bc366d579 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 217 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (0) EAP-Message = 0x010100160410efd47310b444f51d36fd4af8c3411bee (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc367d10bc366d5792e0989a8d4d88e1e (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 218 from 192.168.1.220:43765 to 192.168.1.230:1812 length 167 (1) User-Name = "bob" (1) NAS-IP-Address = 192.168.1.220 (1) NAS-Port = 0 (1) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (1) Calling-Station-Id = "8C-85-90-A8-C0-6E" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11" (1) EAP-Message = 0x020100080319152b (1) State = 0xc367d10bc366d5792e0989a8d4d88e1e (1) Message-Authenticator = 0xa9f13606abb57992b96e5f45040f9465 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) yubikey: No cleartext password in the request. Can't do Yubikey authentication (1) [yubikey] = noop (1) if (ok) { (1) if (ok) -> FALSE (1) files: users: Matched entry bob at line 1 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc367d10bc366d579 (1) eap: Finished EAP session with state 0xc367d10bc366d579 (1) eap: Previous EAP request found for state 0xc367d10bc366d579, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0xc367d10bc265c879 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 218 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc367d10bc265c8792e0989a8d4d88e1e (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 219 from 192.168.1.220:43765 to 192.168.1.230:1812 length 320 (2) User-Name = "bob" (2) NAS-IP-Address = 192.168.1.220 (2) NAS-Port = 0 (2) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (2) Calling-Station-Id = "8C-85-90-A8-C0-6E" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11" (2) EAP-Message = 0x020200a119800000009716030100920100008e03035b055bf0de12e44319f8c94a4cb061018a5621fd60d6ee02f2a9a7216507505600002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (2) State = 0xc367d10bc265c8792e0989a8d4d88e1e (2) Message-Authenticator = 0x6327dc962c74431a5923aeb8e6e2b6da (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bob", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc367d10bc265c879 (2) eap: Finished EAP session with state 0xc367d10bc265c879 (2) eap: Previous EAP request found for state 0xc367d10bc265c879, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv TLS 1.2 [length 0092] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 02e2] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0xc367d10bc164c879 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 219 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (2) EAP-Message = 0x010303ec19c000000484160303003d020000390303ef1f266c966e8b6d64140af4dc0d927661c07fd4746c518e7f5e6a1f724411dc00c030000011ff01000100000b0004030001020017000016030302e20b0002de0002db0002d8308202d4308201bca003020102020900af5948c5fd79d5ac300d0609 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc367d10bc164c8792e0989a8d4d88e1e (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 220 from 192.168.1.220:43765 to 192.168.1.230:1812 length 165 (3) User-Name = "bob" (3) NAS-IP-Address = 192.168.1.220 (3) NAS-Port = 0 (3) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (3) Calling-Station-Id = "8C-85-90-A8-C0-6E" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11" (3) EAP-Message = 0x020300061900 (3) State = 0xc367d10bc164c8792e0989a8d4d88e1e (3) Message-Authenticator = 0x80f9b034e072238b5239f0657c66cffe (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bob", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc367d10bc164c879 (3) eap: Finished EAP session with state 0xc367d10bc164c879 (3) eap: Previous EAP request found for state 0xc367d10bc164c879, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 168 (3) eap: EAP session adding &reply:State = 0xc367d10bc063c879 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 220 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (3) EAP-Message = 0x010400a81900b7ee194d71afcb438932f084b3db961ba5180a0a09ba15d4028b5f0078b7d4d4a674893db7a05cd3b5025a6dd28ae2db976066ab0e6b141c473e2570b01055e8cf1ba7ef883d2fe58654eaae61a8357e3b5b1b27189aeb300dcad624d7be1f3f0c63e27bf4541a35b5e0c94e2a1bc78675 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc367d10bc063c8792e0989a8d4d88e1e (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 230 from 192.168.1.220:43765 to 192.168.1.230:1812 length 295 (4) User-Name = "bob" (4) NAS-IP-Address = 192.168.1.220 (4) NAS-Port = 0 (4) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (4) Calling-Station-Id = "8C-85-90-A8-C0-6E" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11" (4) EAP-Message = 0x0204008819800000007e1603030046100000424104c1348ae85a7b9c35285ee9de09bd8df286a625d7adbe9601c5480bc49872acf809966ef471460e2951219bc4ec94fd4868c0ed4e463cf7560174cd9871d5a95c1403030001011603030028891bb4db5211941689ec2eebfd7d27ca7b7a0d20c61413 (4) State = 0xd3cc6da3d0c87425cf3878ed885e48c2 (4) Message-Authenticator = 0xba4c3ab961e6b0e12a1f3b37ebb335cb (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xd3cc6da3d0c87425 (4) eap: Finished EAP session with state 0xd3cc6da3d0c87425 (4) eap: Previous EAP request found for state 0xd3cc6da3d0c87425, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 57 (4) eap: EAP session adding &reply:State = 0xd3cc6da3d7c97425 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 230 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (4) EAP-Message = 0x0105003919001403030001011603030028ef42c5e91f9fb714e27c582a8d3bec5bb6f255596323322538a5bba7c85af3b15c10acdf382f7256 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xd3cc6da3d7c97425cf3878ed885e48c2 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 231 from 192.168.1.220:43765 to 192.168.1.230:1812 length 165 (5) User-Name = "bob" (5) NAS-IP-Address = 192.168.1.220 (5) NAS-Port = 0 (5) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (5) Calling-Station-Id = "8C-85-90-A8-C0-6E" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11" (5) EAP-Message = 0x020500061900 (5) State = 0xd3cc6da3d7c97425cf3878ed885e48c2 (5) Message-Authenticator = 0x13d654deee955259ba06ba198f4f4447 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xd3cc6da3d7c97425 (5) eap: Finished EAP session with state 0xd3cc6da3d7c97425 (5) eap: Previous EAP request found for state 0xd3cc6da3d7c97425, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 6 length 40 (5) eap: EAP session adding &reply:State = 0xd3cc6da3d6ca7425 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 231 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (5) EAP-Message = 0x010600281900170303001def42c5e91f9fb715aa6f88a699290320723c0cf9a3450d76b3c23a24c5 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xd3cc6da3d6ca7425cf3878ed885e48c2 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 232 from 192.168.1.220:43765 to 192.168.1.230:1812 length 201 (6) User-Name = "bob" (6) NAS-IP-Address = 192.168.1.220 (6) NAS-Port = 0 (6) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (6) Calling-Station-Id = "8C-85-90-A8-C0-6E" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11" (6) EAP-Message = 0x0206002a1900170303001f891bb4db521194172867fe4e3c9a7f984658adb9952a806965f50144812481 (6) State = 0xd3cc6da3d6ca7425cf3878ed885e48c2 (6) Message-Authenticator = 0x145bef7a064d8f40db7ffcc4f9b49cc0 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 42 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xd3cc6da3d6ca7425 (6) eap: Finished EAP session with state 0xd3cc6da3d6ca7425 (6) eap: Previous EAP request found for state 0xd3cc6da3d6ca7425, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bob (6) eap_peap: Got inner identity 'bob' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0206000b016a65726f656e (6) eap_peap: Setting User-Name to bob (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0206000b016a65726f656e (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "bob" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0206000b016a65726f656e (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bob" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 43 (6) eap: EAP session adding &reply:State = 0x305cf110305beb4f (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0107002b1a0107002610150414003634bfd7136f7c43df1830fb667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 74 (6) eap: EAP session adding &reply:State = 0xd3cc6da3d5cb7425 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 232 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (6) EAP-Message = 0x0107004a1900170303003fef42c5e91f9fb71695db7c7f75733b4dd45c25e544d4501e1b912f822d0f1f79f494c7badbc0a0476a9bf1dd09486f80306859d6df798311f07dab8d3ca7c3 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xd3cc6da3d5cb7425cf3878ed885e48c2 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 233 from 192.168.1.220:43765 to 192.168.1.230:1812 length 255 (7) User-Name = "bob" (7) NAS-IP-Address = 192.168.1.220 (7) NAS-Port = 0 (7) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (7) Calling-Station-Id = "8C-85-90-A8-C0-6E" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11" (7) EAP-Message = 0x0207006019001703030055891bb4db5211941853b0ca4d500ace97e925171127b41192a42c1fb0d0ae6aceaf4b30748b6efd94ae7801e0f20ffffb98699f8746c64a52a2501e3501ee5c8f582d7dd27ed46281e45306e4ee9adadd833dab64a9 (7) State = 0xd3cc6da3d5cb7425cf3878ed885e48c2 (7) Message-Authenticator = 0xa1d8ff90bd51408bdc96a66a0aa42f69 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 96 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x305cf110305beb4f (7) eap: Finished EAP session with state 0xd3cc6da3d5cb7425 (7) eap: Previous EAP request found for state 0xd3cc6da3d5cb7425, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) eap_peap: Setting User-Name to bob (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "bob" (7) eap_peap: State = 0x305cf110305beb4ff93560a881317c76 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020700411a0207003c31a04cefee67b9ec0bf467c2745dbcc534000000000000000090daaf779f03d29dae169be5759c9763b7897934d1a9dcbb006a65726f656e (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "bob" (7) State = 0x305cf110305beb4ff93560a881317c76 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 65 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry bob at line 1 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x305cf110305beb4f (7) eap: Finished EAP session with state 0x305cf110305beb4f (7) eap: Previous EAP request found for state 0x305cf110305beb4f, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Found Cleartext-Password, hashing to create LM-Password (7) mschap: Creating challenge hash with username: bob (7) mschap: Client is using MS-CHAPv2 (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) [mschap] = reject (7) } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 7 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> bob (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) EAP-Message = 0x04070004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=a1682b9ee5f85724afd5f43b4dca3845 V=3 M=Authentication failed" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 8 length 46 (7) eap: EAP session adding &reply:State = 0xd3cc6da3d4c47425 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) session-state: Saving cached attributes (7) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (7) Sent Access-Challenge Id 233 from 192.168.1.230:1812 to 192.168.1.220:43765 length 0 (7) EAP-Message = 0x0108002e19001703030023ef42c5e91f9fb71721d27ee74986932a13cac4fe3facf2bdf9fc377fb741ad2e107871 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xd3cc6da3d4c47425cf3878ed885e48c2 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 234 from 192.168.1.220:43765 to 192.168.1.230:1812 length 205 (8) User-Name = "bob" (8) NAS-IP-Address = 192.168.1.220 (8) NAS-Port = 0 (8) Called-Station-Id = "50-C7-BF-4F-E3-42:DEV_WLAN" (8) Calling-Station-Id = "8C-85-90-A8-C0-6E" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11" (8) EAP-Message = 0x0208002e19001703030023891bb4db521194193daa0dfba788033a3d2c11ae997ade3d49b3f979847e44e4e76444 (8) State = 0xd3cc6da3d4c47425cf3878ed885e48c2 (8) Message-Authenticator = 0x645cdf7a82da45c1562f4cf981523af5 (8) Restoring &session-state (8) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xd3cc6da3d4c47425 (8) eap: Finished EAP session with state 0xd3cc6da3d4c47425 (8) eap: Previous EAP request found for state 0xd3cc6da3d4c47425, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 8 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> bob (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 234 from 192.168.1.230:1812 to 192.168.1.220:43765 length 44 (8) EAP-Message = 0x04080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 226 with timestamp +31 (1) Cleaning up request packet ID 227 with timestamp +31 (2) Cleaning up request packet ID 228 with timestamp +31 (3) Cleaning up request packet ID 229 with timestamp +31 (4) Cleaning up request packet ID 230 with timestamp +31 (5) Cleaning up request packet ID 231 with timestamp +31 (6) Cleaning up request packet ID 232 with timestamp +31 (7) Cleaning up request packet ID 233 with timestamp +31 (8) Cleaning up request packet ID 234 with timestamp +31 Ready to process requests Kind regards!

7 10

network radius rpm for centos
by Kacper Wirski 21 Jun '18

21 Jun '18

Hello, I have a few successfull freeradius installation on Centos 7. So far I've been using either RPM from centos repositories or self-compiled. This time I wanted to try RPM from network radius. I've added keys and repos based on the information found on network radius site (https://networkradius.com/freeradius-packages/index.html) but unfortunately "yum" didn't want to install freeradius packages, because it returned error "package is not signed". Same error was for all freeradius packages. Key is imported correctly (I can see it with rpm -q gpg-pubkey-........ output of "rpm -qi gpg-pubkey-<number>" seems fine on the first glance: Name : gpg-pubkey Version : 41382202 Release : 540df604 Architecture: (none) Install Date: Mon 18 Jun 2018 11:39:29 AM CEST Group : Public Keys Size : 0 License : pubkey Signature : (none) Source RPM : (none) Build Date : Mon 08 Sep 2014 08:31:32 PM CEST Build Host : localhost Relocations : (not relocatable) Packager : Network RADIUS Support (package signing) <packages(a)networkradius.com> Summary : gpg(Network RADIUS Support (package signing) <packages(a)networkradius.com>) Description : When verifying package (rpm -K freeradius........rpm) I don't see gpg verification freeradius-3.0.17-2.el7.centos.x86_64.rpm: sha1 md5 OK Can anyone on the mailing list comment on this issue? Are packages not being signed on purpose? Regards, Kacper

1 0

User/Password
by jandersen＠gocom.ca 20 Jun '18

20 Jun '18

Hi I am a beginner My radius was transferred from an old server. I don't know how to add a new user and I don't know where user/passwords are stored - directory/folder/name. My radius rejects all request for authentication. I want to add a new user, so I can test on a user I know is there. What program to use or where is the data base file with the user/passwords? J.Andersen

2 1