August 2018 - Freeradius-Users - lists.freeradius.org

Fw: Wifi Captive portal
by hiran bhagvan 15 Aug '18

15 Aug '18

Image by FlamingText.com ----- Forwarded message ----- From: hiran bhagvan <hiranuk(a)yahoo.co.uk>To: freeradius-users(a)lists.freeradius.org <freeradius-users(a)lists.freeradius.org>Sent: Wednesday, 15 August 2018, 13:43:54 BSTSubject: Fw: Wifi Captive portal Image by FlamingText.com ----- Forwarded message ----- From: hiran bhagvan <hiranuk(a)yahoo.co.uk>To: freeradius-users(a)lists.freeradius.org <freeradius-users(a)lists.freeradius.org>Sent: Wednesday, 15 August 2018, 12:24:19 BSTSubject: Wifi Captive portal Hi I would like to use free radius but im not sure if it will support what i will need it to do. i need it to authenticate guest wi-fi uses that connect to a Draytek router. The Draytek router has a captive portal conifg and can have a external radius server carrying out the authentication so i was thinking of using "Free radius" for this. The Draytek routers will be in different locations around the country and the free radius server will be a central server that all the Draytek's talk to I have attached screenshots of the Draytek config page can you tell me if i would be about to use "Free radius" to authenticate users by MAC addresses of their devices? Thanks in advance Hiran Image by FlamingText.com

1 0

Fw: Wifi Captive portal
by hiran bhagvan 15 Aug '18

15 Aug '18

Image by FlamingText.com ----- Forwarded message ----- From: hiran bhagvan <hiranuk(a)yahoo.co.uk>To: freeradius-users(a)lists.freeradius.org <freeradius-users(a)lists.freeradius.org>Sent: Wednesday, 15 August 2018, 13:43:54 BSTSubject: Fw: Wifi Captive portal Image by FlamingText.com ----- Forwarded message ----- From: hiran bhagvan <hiranuk(a)yahoo.co.uk>To: freeradius-users(a)lists.freeradius.org <freeradius-users(a)lists.freeradius.org>Sent: Wednesday, 15 August 2018, 12:24:19 BSTSubject: Wifi Captive portal Hi I would like to use free radius but im not sure if it will support what i will need it to do. i need it to authenticate guest wi-fi uses that connect to a Draytek router. The Draytek router has a captive portal conifg and can have a external radius server carrying out the authentication so i was thinking of using "Free radius" for this. The Draytek routers will be in different locations around the country and the free radius server will be a central server that all the Draytek's talk to I have attached screenshots of the Draytek config page can you tell me if i would be about to use "Free radius" to authenticate users by MAC addresses of their devices? Thanks in advance Hiran Image by FlamingText.com

1 0

Cut domain from username
by Алексей Морозенко 13 Aug '18

13 Aug '18

Hi to all. I've set up FreeRADIUS(3.0.17)+LDAP(FreeIPA) and everything works.. ..but some people put domain in their's login (like username(a)domain.com or even username(a)gmail.com) Authorization succeds (because of use of Stripped-User-Name) but I see username(a)domain.com logins in my Wifi console. Another issue is that FreeRADIUS proxies acct requests to the gateway where group based policy is applied. There is no username(a)domain.com in LDAP, just username, so I have empty group and minimal access Of course, I can administratively prohibit logins with @domain.com (filter policy), but maybe there is more elegant way to just convert User-Name in Stripped-User-Name regardless of user input? Thanks in advance. -- Best regards, Alex Morozenko

3 4

Two questions about EAP-TLS
by Norman Elton 13 Aug '18

13 Aug '18

We've been running PEAP + MS-CHAPv2 for many many years. Beginning to experiment with EAP-TLS, and have two questions ... - My certificates are generated by an intermediate CA. It appears I need to put both the root and intermediate CA into the CA_file (ca.pem)? I was expecting to put the root CA somewhere else, to indicate that it is only used to trust the intermediate. - It seems that FreeRADIUS won't start if I comment out the certificate_file and private_key_file. My understanding is that these are only used for MS-CHAPv2, and are irrelevant in an EAP-TLS environment. Correct me if I'm wrong here. Should I just leave these as self-signed dummy certificates? Thanks, Norman

2 3

"Suite B TLS cipher suite" support
by elmerhe 13 Aug '18

13 Aug '18

Hi Freeradius experts, I want to know if freeRADIUS supports "Suite B TLS cipher suite" which is required by WPA3-enterprise. If yes, any specific configuration is needed? Thanks, John.

2 1

Query regarding FreeRADIUS to support multiple Root CA’s
by Dhal, Kaustav 13 Aug '18

13 Aug '18

Hi, I am trying to configure FreeRADIUS to support multiple Root CA’s. It‘s a test environment and I need to verify my node against multiple ROOT CA’s. I have made changes in eap.conf for the same but I can authenticate only against the first ROOT CA mentioned in the list. It ignores all other Root CA’s that I have mentioned. Is there a way by which I can configure FreeRADIUS to support multiple ROOT CA’s. Please clarify. Thanks, FreeRADIUS version 3.0.15 Regards, Kaustav P PLEASE CONSIDER OUR ENVIRONMENT BEFORE PRINTING THIS EMAIL. This e-mail (including any attachments) is confidential and may be legally privileged. If you are not an intended recipient or an authorized representative of an intended recipient, you are prohibited from using, copying or distributing the information in this e-mail or its attachments. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete all copies of this message and any attachments. Thank you.

2 1

Filtering out Proxy-State in COA to fix broken Cisco NAS
by Fraser McGlinn 13 Aug '18

13 Aug '18

Hi Guys, Trying to get COA proxying working with a Cisco NAS. Unfortunately they have a broken implementation where if Proxy-State is in the request it drops it. I dug and found this old thread http://lists.freeradius.org/pipermail/freeradius-users/2012-April/060456.ht… implying that we can filter out Proxy-State in attr_filter, however i've had some issues getting this working. Although this was relevant to freeradius 2x, i'm running 3.0.16. Any other ways to achieve this? Hoping someone can point me in the right direction. Thank heaps! Fraser

2 2

Re: Freeradius-Users Digest, Vol 160, Issue 16
by Arun NP 13 Aug '18

13 Aug '18

Hi , I am doing a yum install & it is supposed to bring the latest version rt ? . Please let me know how I can get the version which you are using (3.0.17) . I am using centos 7 does the version which you mentioned exist for the same ? please inform me Thanks, Arun On Sun, Aug 12, 2018 at 11:39 AM < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: dynamic vlan assign and LDAP authentication > (Siddhartha Mishra) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 12 Aug 2018 11:38:35 +0530 > From: Siddhartha Mishra <siddhartha0111(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Re: dynamic vlan assign and LDAP authentication > Message-ID: > < > CAGb7Tj4XhTvHza8fd5Fk3d-rRtzi94wKBaMZXTWYPpF5aehqMg(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Dear All, > > Please help to me for configuration dynamic vlan on user authentication via > LDAP. > User authentication via LDAP is working > But when we r going to enable file module in innertunnel and default file > it's not work. > > Because we add grop- LDAP detail in users file. > > Please help to resolve this. > > On Fri 10 Aug, 2018, 10:59 PM , < > freeradius-users-request(a)lists.freeradius.org> wrote: > > > Send Freeradius-Users mailing list submissions to > > freeradius-users(a)lists.freeradius.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.freeradius.org/mailman/listinfo/freeradius-users > > or, via email, send a message with subject or body 'help' to > > freeradius-users-request(a)lists.freeradius.org > > > > You can reach the person managing the list at > > freeradius-users-owner(a)lists.freeradius.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Freeradius-Users digest..." > > > > > > Today's Topics: > > > > 1. Re: Freeradius-Users Digest, Vol 160, Issue 9 (Alan DeKok) > > 2. Re: Filtering out Proxy-State in COA to fix broken Cisco NAS > > (Alan DeKok) > > 3. FOREACH error message? (Stefan Paetow) > > 4. Re: FOREACH error message? (Stefan Paetow) > > 5. Re:Re: Accounting-Request packet shared secret fail (Alan > > DeKok) (Kevin Virk) (Alan DeKok) (Kevin Virk) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Fri, 10 Aug 2018 07:21:24 -0400 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: Freeradius-Users Digest, Vol 160, Issue 9 > > Message-ID: <3BC2D945-4A1F-4E2C-8328-61997A3A0A98(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > On Aug 10, 2018, at 4:29 AM, Arun NP <arun85np(a)gmail.com> wrote: > > > As suggested . I removed free radius & deleted all the files and did a > > > fresh installation. > > > This time , I did only the following changes : > > > > OK. > > > > > copied default file in sites-available to a file "new" . > > > Edited the port numbers in new four times ,two for authentication and > two > > > for accounting > > > created a soft link for new in the sites-enabled directory > > > > Did you edit the name? "server NEW { " ? > > > > > added my client IPs and secret to the clients.conf file > > > started radius by "radiusd -d /etc/raddb -i 5.1.13.70 -p 2018 -X > > > > > > But , still I am getting the same error. > > > > I'm running v3.0.x head (mostly 3.0.17) and it works for me. > > > > > radiusd -d /etc/raddb -i 5.1.13.70 -p 2018 -X > > > FreeRADIUS Version 3.0.13 > > > > Upgrade. > > > > We're not going to track down & fix bugs which were already found and > > fixed years ago. > > > > Alan DeKok. > > > > > > > > > > ------------------------------ > > > > Message: 2 > > Date: Fri, 10 Aug 2018 08:12:35 -0400 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: Filtering out Proxy-State in COA to fix broken Cisco NAS > > Message-ID: <E01CB6A4-EDD9-4A23-BA0E-D50941E442E3(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > On Aug 8, 2018, at 9:19 PM, Fraser McGlinn <fraser(a)frizianz.com> wrote: > > > > > > Trying to get COA proxying working with a Cisco NAS. Unfortunately they > > have a broken implementation where if Proxy-State is in the request it > > drops it. > > > > That's based on a naive reading of RFC 5176. Happily, my new draft > > clarifies this. It should be an RFC this year: > > > > https://tools.ietf.org/html/draft-ietf-radext-coa-proxy-03 > > > > > I dug and found this old thread > > > http://lists.freeradius.org/pipermail/freeradius-users/2012-April/060456.ht… > > implying that we can filter out Proxy-State in attr_filter, however i've > > had some issues getting this working. Although this was relevant to > > freeradius 2x, i'm running 3.0.16. > > > > > > Any other ways to achieve this? Hoping someone can point me in the > right > > direction. > > > > You can delete the Proxy-State attribute in the "pre-proxy" section: > > > > pre-proxy { > > ... > > update proxy-request { > > Proxy-State !* ANY > > } > > ... > > } > > > > Hope that helps. > > > > Alan DeKok. > > > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Fri, 10 Aug 2018 14:01:31 +0000 > > From: Stefan Paetow <Stefan.Paetow(a)jisc.ac.uk> > > To: "freeradius-users(a)lists.freeradius.org" > > <freeradius-users(a)lists.freeradius.org> > > Subject: FOREACH error message? > > Message-ID: <C77025A2-BE73-4732-8924-996CBE33C547(a)jisc.ac.uk> > > Content-Type: text/plain; charset=UTF-8 > > > > Alan, Arran et al, > > > > I'm getting this message: > > > > /etc/raddb/policy.d/moonshot-assertion[46]: MUST use attribute or list > > reference in 'foreach' > > /etc/raddb/policy.d/moonshot-assertion[46]: Failed to parse "foreach" > > subsection. > > /etc/raddb/policy.d/moonshot-assertion[38]: Failed to parse "if" > > subsection. > > /etc/raddb/policy.d/moonshot-assertion[105]: Failed to parse > > "saml_add_affiliation" entry. > > > > The policy in question is this (I've marked line 46 with '46>'): > > > > # This policy adds the eduPersonAffiliation if it exists > > saml_add_affiliation.post-auth { > > # Only try to add the Affiliation when the attribute exists > > if (&reply:Reply-eduPersonAffiliation) { > > update control { > > SAML-Attribute-Value !* ANY > > SAML-Attribute-Value += > > "%{explode:&reply:Reply-eduPersonAffiliation ,}" > > } > > update reply { > > SAML-AAA-Assertion += '<saml:Attribute > > Name="urn:oid:0.9.2342.19200300.100.1.1" > > NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri">' > > } > > 46> foreach &control:SAML-Attribute-Value { > > update reply { > > SAML-AAA-Assertion += > > '<saml:AttributeValue xsi:type="xs:string">' > > SAML-AAA-Assertion += > > "%{Foreach-Variable-0}" > > SAML-AAA-Assertion += > > '</saml:AttributeValue>' > > } > > } > > update reply { > > SAML-AAA-Assertion += '</saml:Attribute>' > > } > > } > > } > > > > I can't see where I'm going wrong here... It's probably something *very* > > obvious that I can't see. I'm using FreeRADIUS 3.0.15 (I know, I know... > > It's not the newest). > > > > Can someone point out the obvious mistake? :-/ > > > > Thank you :-) > > > > Stefan Paetow > > Consultant, Trust and Identity > > > > t: +44 (0)1235 822 125 > > gpg: 0x3FCE5142 > > xmpp: stefanp(a)jabber.dev.ja.net > > skype: stefan.paetow.janet > > > > jisc.ac.uk > > > > Jisc is a registered charity (number 1149740) and a company limited by > > guarantee which is registered in England under Company No. 5747339, VAT > No. > > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > > Bristol, BS2 0JA. T 0203 697 5800. > > > > > > > > > > > > ------------------------------ > > > > Message: 4 > > Date: Fri, 10 Aug 2018 14:18:52 +0000 > > From: Stefan Paetow <Stefan.Paetow(a)jisc.ac.uk> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: FOREACH error message? > > Message-ID: <198BEB54-C708-4E9A-8A18-012E2C3B4131(a)jisc.ac.uk> > > Content-Type: text/plain; charset=UTF-8 > > > > And I've figured it out... > > > > It would help to update the dictionary with the custom values! *headdesk* > > > > *eyeroll* > > > > Stefan Paetow > > Consultant, Trust and Identity > > > > t: +44 (0)1235 822 125 > > gpg: 0x3FCE5142 > > xmpp: stefanp(a)jabber.dev.ja.net > > skype: stefan.paetow.janet > > > > jisc.ac.uk > > > > Jisc is a registered charity (number 1149740) and a company limited by > > guarantee which is registered in England under Company No. 5747339, VAT > No. > > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > > Bristol, BS2 0JA. T 0203 697 5800. > > > > > > On 10/08/2018, 15:02, "Freeradius-Users on behalf of Stefan Paetow" > > <freeradius-users-bounces+stefan.paetow=jisc.ac.uk(a)lists.freeradius.org > > on behalf of Stefan.Paetow(a)jisc.ac.uk> wrote: > > > > Alan, Arran et al, > > > > I'm getting this message: > > > > /etc/raddb/policy.d/moonshot-assertion[46]: MUST use attribute or > list > > reference in 'foreach' > > /etc/raddb/policy.d/moonshot-assertion[46]: Failed to parse "foreach" > > subsection. > > /etc/raddb/policy.d/moonshot-assertion[38]: Failed to parse "if" > > subsection. > > /etc/raddb/policy.d/moonshot-assertion[105]: Failed to parse > > "saml_add_affiliation" entry. > > > > The policy in question is this (I've marked line 46 with '46>'): > > > > # This policy adds the eduPersonAffiliation if it exists > > saml_add_affiliation.post-auth { > > # Only try to add the Affiliation when the attribute exists > > if (&reply:Reply-eduPersonAffiliation) { > > update control { > > SAML-Attribute-Value !* ANY > > SAML-Attribute-Value += > > "%{explode:&reply:Reply-eduPersonAffiliation ,}" > > } > > update reply { > > SAML-AAA-Assertion += '<saml:Attribute > > Name="urn:oid:0.9.2342.19200300.100.1.1" > > NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri">' > > } > > 46> foreach &control:SAML-Attribute-Value { > > update reply { > > SAML-AAA-Assertion += > > '<saml:AttributeValue xsi:type="xs:string">' > > SAML-AAA-Assertion += > > "%{Foreach-Variable-0}" > > SAML-AAA-Assertion += > > '</saml:AttributeValue>' > > } > > } > > update reply { > > SAML-AAA-Assertion += '</saml:Attribute>' > > } > > } > > } > > > > I can't see where I'm going wrong here... It's probably something > > *very* obvious that I can't see. I'm using FreeRADIUS 3.0.15 (I know, I > > know... It's not the newest). > > > > Can someone point out the obvious mistake? :-/ > > > > Thank you :-) > > > > Stefan Paetow > > Consultant, Trust and Identity > > > > t: +44 (0)1235 822 125 > > gpg: 0x3FCE5142 > > xmpp: stefanp(a)jabber.dev.ja.net > > skype: stefan.paetow.janet > > > > jisc.ac.uk > > > > Jisc is a registered charity (number 1149740) and a company limited > by > > guarantee which is registered in England under Company No. 5747339, VAT > No. > > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > > Bristol, BS2 0JA. T 0203 697 5800. > > > > > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > > > > > > ------------------------------ > > > > Message: 5 > > Date: Fri, 10 Aug 2018 17:28:25 +0000 > > From: Kevin Virk <Kevin.Virk(a)faithlife.com> > > To: "freeradius-users(a)lists.freeradius.org" > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re:Re: Accounting-Request packet shared secret fail (Alan > > DeKok) (Kevin Virk) (Alan DeKok) > > Message-ID: <1533922105253.29587(a)faithlife.com> > > Content-Type: text/plain; charset=WINDOWS-1252 > > > > > > I did make sure to restart the server. I did fail to mention that I > purged > > freeradius and reinstalled so I must have made a configuration error > > somewhere along the way. > > > > > > From: Freeradius-Users <freeradius-users-bounces+kevin.virk= > > faithlife.com(a)lists.freeradius.org> on behalf of > > freeradius-users-request(a)lists.freeradius.org < > > freeradius-users-request(a)lists.freeradius.org> > > Sent: Friday, August 10, 2018 1:30 AM > > To: freeradius-users(a)lists.freeradius.org > > Subject: Freeradius-Users Digest, Vol 160, Issue 14 > > > > Send Freeradius-Users mailing list submissions to > > freeradius-users(a)lists.freeradius.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.freeradius.org/mailman/listinfo/freeradius-users > > or, via email, send a message with subject or body 'help' to > > freeradius-users-request(a)lists.freeradius.org > > > > You can reach the person managing the list at > > freeradius-users-owner(a)lists.freeradius.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Freeradius-Users digest..." > > > > > > Today's Topics: > > > > 1. Re: ldap module for user and mac authentication (Dave Macias) > > 2. Re: ldap module for user and mac authentication (Michael Ströder) > > 3. Re: Accounting-Request packet shared secret fail (Alan DeKok) > > (Kevin Virk) (Alan DeKok) > > 4. Re: Dynamic vlan assignment (Dom Latter) > > 5. Re: Freeradius-Users Digest, Vol 160, Issue 9 (Arun NP) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Thu, 9 Aug 2018 08:23:51 -0400 > > From: Dave Macias <davama(a)gmail.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: ldap module for user and mac authentication > > Message-ID: > > <CA+nFYV_UOg+TuMMciVwPWTHUX5B=H=rbhpUE9mv_e+rsVDvCYw(a)mail.gmail.com> > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > Yes, I had thought of something to the effect of (suggestions > welcomed) : > > > > > > * if > > > > > > (!"%{ldap:ldap://master1/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?cn?sub?(* > > > *&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") {* > > > * if > > > > > > (!"%{ldap:ldap://master2/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?c* > > > > > > *n?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > > > {* > > > * reject* > > > * }* > > > * }* > > > * update {* > > > * control:Auth-Type := Accept* > > > * }* > > > > > > But this does not account for the scenario of openldap being dead. > > > The 1st "if" statement will be always be FALSE and never attempt the > next > > > "if" statement and therefore 'Accept' > > > > > > > I believe i misspoke here... > > But interesting observations. > > > > if i use the below code AND have multiple ldap servers configured in my > > ldap module, radius '%{ldap:ldap:///...}' will automatically go to the > one > > that is alive; assuming one is at least alive. IF i have just one ldap > > server configured in my ldap module, (which is dead), then the 'if' will > > FAIL and reject as it should. > > > > *if > > > > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > > {* > > *reject* > > *}* > > *else {* > > *update {* > > *control:Auth-Type := Accept* > > *}* > > *}* > > > > Same results as above (ldap module will use the live ldap server, not the > > dead one) > > *if > > > > > (!"%{ldap:ldap://dead-ldap-server/ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}")* > > *...* > > *...* > > > > So what did i learn? > > you dont need to use the SRV record for failover, as long as you have all > > the ldap servers in your ldap module. > > > > I think it makes sense since '%{ldap:...}" is using the ldap module, > > technically, but i would have thought that "ldap:///" or > > "ldap://dead-ldap-server/" meant localhost/dead-ldap-server not > > "live.ldap.the-module-found' > > > > Or maybe im just completely off... > > Hope that makes, sense. > > > > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { > > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) -> TRUE > > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { > > (1) policy rewrite_calling_station_id { > > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > > > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > > { > > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > > > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > > -> TRUE > > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > > > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > > { > > (1) update request { > > (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > > (1) --> 00-04-F2-DD-98-C6 > > (1) &Calling-Station-Id := 00-04-F2-DD-98-C6 > > (1) } # update request = noop > > (1) [updated] = updated > > (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ > > > > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > > = updated > > (1) ... skipping else: Preceding "if" was taken > > (1) } # policy rewrite_calling_station_id = updated > > (1) if > > > > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > > { > > rlm_ldap (ldap): Reserved connection (0) > > (1) Performing search in "ou=sub-macs,ou=macs,dc=myorg,dc=net" with > > filter "(&(objectClass=ieee802Device)(macAddress=00-04-F2-DD-98-C6))", > > scope "sub" > > (1) Waiting for search result... > > rlm_ldap (ldap): Released connection (0) > > Need 5 more connections to reach 10 spares > > rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots > > used > > rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://ldap2:389 > > TLSMC: MozNSS compatibility interception begins. > > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration > is > > present. > > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > > initialization. Continuing with OpenSSL only. > > TLSMC: MozNSS compatibility interception ends. > > rlm_ldap (ldap): Waiting for bind result... > > rlm_ldap (ldap): Bind successful > > (1) EXPAND > > > > > %{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))} > > (1) --> 0004f2dd98c6 > > (1) if > > > > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > > -> FALSE > > (1) else { > > (1) update { > > (1) control:Auth-Type := Accept > > (1) } # update = noop > > (1) } # else = noop > > (1) } # if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) = > > updated > > (1) ... skipping else: Preceding "if" was taken > > (1) [expiration] = noop > > (1) [logintime] = noop > > (1) pap: WARNING: Auth-Type already set. Not setting to PAP > > (1) [pap] = noop > > (1) } # authorize = updated > > (1) Found Auth-Type = Accept > > > > > > ------------------------------ > > > > Message: 2 > > Date: Thu, 9 Aug 2018 14:40:04 +0200 > > From: Michael Ströder <michael(a)stroeder.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org>, Dave Macias > > <davama(a)gmail.com> > > Subject: Re: ldap module for user and mac authentication > > Message-ID: <7caaa8c6-5a4c-19b6-a59b-fa045992de8c(a)stroeder.com> > > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > > > On 8/9/18 2:23 PM, Dave Macias wrote: > > > So what did i learn? > > > you dont need to use the SRV record for failover, as long as you have > all > > > the ldap servers in your ldap module. > > > > Yes! > > > > In theory the advantage of SRV RRs are that you can theoretically change > > what's in your pool of LDAP servers and adjust priorities based on > > locations. > > > > Besides that I don't believe anybody fully implemented that I'm not a > > fan of SRV RRs anyway because the TLS hostname check is not even defined > > for that. > > > > Ciao, Michael. > > > >

2 1

Re: dynamic vlan assign and LDAP authentication
by Siddhartha Mishra 12 Aug '18

12 Aug '18

Dear All, Please help to me for configuration dynamic vlan on user authentication via LDAP. User authentication via LDAP is working But when we r going to enable file module in innertunnel and default file it's not work. Because we add grop- LDAP detail in users file. Please help to resolve this. On Fri 10 Aug, 2018, 10:59 PM , < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Freeradius-Users Digest, Vol 160, Issue 9 (Alan DeKok) > 2. Re: Filtering out Proxy-State in COA to fix broken Cisco NAS > (Alan DeKok) > 3. FOREACH error message? (Stefan Paetow) > 4. Re: FOREACH error message? (Stefan Paetow) > 5. Re:Re: Accounting-Request packet shared secret fail (Alan > DeKok) (Kevin Virk) (Alan DeKok) (Kevin Virk) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 10 Aug 2018 07:21:24 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Freeradius-Users Digest, Vol 160, Issue 9 > Message-ID: <3BC2D945-4A1F-4E2C-8328-61997A3A0A98(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Aug 10, 2018, at 4:29 AM, Arun NP <arun85np(a)gmail.com> wrote: > > As suggested . I removed free radius & deleted all the files and did a > > fresh installation. > > This time , I did only the following changes : > > OK. > > > copied default file in sites-available to a file "new" . > > Edited the port numbers in new four times ,two for authentication and two > > for accounting > > created a soft link for new in the sites-enabled directory > > Did you edit the name? "server NEW { " ? > > > added my client IPs and secret to the clients.conf file > > started radius by "radiusd -d /etc/raddb -i 5.1.13.70 -p 2018 -X > > > > But , still I am getting the same error. > > I'm running v3.0.x head (mostly 3.0.17) and it works for me. > > > radiusd -d /etc/raddb -i 5.1.13.70 -p 2018 -X > > FreeRADIUS Version 3.0.13 > > Upgrade. > > We're not going to track down & fix bugs which were already found and > fixed years ago. > > Alan DeKok. > > > > > ------------------------------ > > Message: 2 > Date: Fri, 10 Aug 2018 08:12:35 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Filtering out Proxy-State in COA to fix broken Cisco NAS > Message-ID: <E01CB6A4-EDD9-4A23-BA0E-D50941E442E3(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Aug 8, 2018, at 9:19 PM, Fraser McGlinn <fraser(a)frizianz.com> wrote: > > > > Trying to get COA proxying working with a Cisco NAS. Unfortunately they > have a broken implementation where if Proxy-State is in the request it > drops it. > > That's based on a naive reading of RFC 5176. Happily, my new draft > clarifies this. It should be an RFC this year: > > https://tools.ietf.org/html/draft-ietf-radext-coa-proxy-03 > > > I dug and found this old thread > http://lists.freeradius.org/pipermail/freeradius-users/2012-April/060456.ht… > implying that we can filter out Proxy-State in attr_filter, however i've > had some issues getting this working. Although this was relevant to > freeradius 2x, i'm running 3.0.16. > > > > Any other ways to achieve this? Hoping someone can point me in the right > direction. > > You can delete the Proxy-State attribute in the "pre-proxy" section: > > pre-proxy { > ... > update proxy-request { > Proxy-State !* ANY > } > ... > } > > Hope that helps. > > Alan DeKok. > > > > > ------------------------------ > > Message: 3 > Date: Fri, 10 Aug 2018 14:01:31 +0000 > From: Stefan Paetow <Stefan.Paetow(a)jisc.ac.uk> > To: "freeradius-users(a)lists.freeradius.org" > <freeradius-users(a)lists.freeradius.org> > Subject: FOREACH error message? > Message-ID: <C77025A2-BE73-4732-8924-996CBE33C547(a)jisc.ac.uk> > Content-Type: text/plain; charset=UTF-8 > > Alan, Arran et al, > > I'm getting this message: > > /etc/raddb/policy.d/moonshot-assertion[46]: MUST use attribute or list > reference in 'foreach' > /etc/raddb/policy.d/moonshot-assertion[46]: Failed to parse "foreach" > subsection. > /etc/raddb/policy.d/moonshot-assertion[38]: Failed to parse "if" > subsection. > /etc/raddb/policy.d/moonshot-assertion[105]: Failed to parse > "saml_add_affiliation" entry. > > The policy in question is this (I've marked line 46 with '46>'): > > # This policy adds the eduPersonAffiliation if it exists > saml_add_affiliation.post-auth { > # Only try to add the Affiliation when the attribute exists > if (&reply:Reply-eduPersonAffiliation) { > update control { > SAML-Attribute-Value !* ANY > SAML-Attribute-Value += > "%{explode:&reply:Reply-eduPersonAffiliation ,}" > } > update reply { > SAML-AAA-Assertion += '<saml:Attribute > Name="urn:oid:0.9.2342.19200300.100.1.1" > NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri">' > } > 46> foreach &control:SAML-Attribute-Value { > update reply { > SAML-AAA-Assertion += > '<saml:AttributeValue xsi:type="xs:string">' > SAML-AAA-Assertion += > "%{Foreach-Variable-0}" > SAML-AAA-Assertion += > '</saml:AttributeValue>' > } > } > update reply { > SAML-AAA-Assertion += '</saml:Attribute>' > } > } > } > > I can't see where I'm going wrong here... It's probably something *very* > obvious that I can't see. I'm using FreeRADIUS 3.0.15 (I know, I know... > It's not the newest). > > Can someone point out the obvious mistake? :-/ > > Thank you :-) > > Stefan Paetow > Consultant, Trust and Identity > > t: +44 (0)1235 822 125 > gpg: 0x3FCE5142 > xmpp: stefanp(a)jabber.dev.ja.net > skype: stefan.paetow.janet > > jisc.ac.uk > > Jisc is a registered charity (number 1149740) and a company limited by > guarantee which is registered in England under Company No. 5747339, VAT No. > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > Bristol, BS2 0JA. T 0203 697 5800. > > > > > > ------------------------------ > > Message: 4 > Date: Fri, 10 Aug 2018 14:18:52 +0000 > From: Stefan Paetow <Stefan.Paetow(a)jisc.ac.uk> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: FOREACH error message? > Message-ID: <198BEB54-C708-4E9A-8A18-012E2C3B4131(a)jisc.ac.uk> > Content-Type: text/plain; charset=UTF-8 > > And I've figured it out... > > It would help to update the dictionary with the custom values! *headdesk* > > *eyeroll* > > Stefan Paetow > Consultant, Trust and Identity > > t: +44 (0)1235 822 125 > gpg: 0x3FCE5142 > xmpp: stefanp(a)jabber.dev.ja.net > skype: stefan.paetow.janet > > jisc.ac.uk > > Jisc is a registered charity (number 1149740) and a company limited by > guarantee which is registered in England under Company No. 5747339, VAT No. > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > Bristol, BS2 0JA. T 0203 697 5800. > > > On 10/08/2018, 15:02, "Freeradius-Users on behalf of Stefan Paetow" > <freeradius-users-bounces+stefan.paetow=jisc.ac.uk(a)lists.freeradius.org > on behalf of Stefan.Paetow(a)jisc.ac.uk> wrote: > > Alan, Arran et al, > > I'm getting this message: > > /etc/raddb/policy.d/moonshot-assertion[46]: MUST use attribute or list > reference in 'foreach' > /etc/raddb/policy.d/moonshot-assertion[46]: Failed to parse "foreach" > subsection. > /etc/raddb/policy.d/moonshot-assertion[38]: Failed to parse "if" > subsection. > /etc/raddb/policy.d/moonshot-assertion[105]: Failed to parse > "saml_add_affiliation" entry. > > The policy in question is this (I've marked line 46 with '46>'): > > # This policy adds the eduPersonAffiliation if it exists > saml_add_affiliation.post-auth { > # Only try to add the Affiliation when the attribute exists > if (&reply:Reply-eduPersonAffiliation) { > update control { > SAML-Attribute-Value !* ANY > SAML-Attribute-Value += > "%{explode:&reply:Reply-eduPersonAffiliation ,}" > } > update reply { > SAML-AAA-Assertion += '<saml:Attribute > Name="urn:oid:0.9.2342.19200300.100.1.1" > NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri">' > } > 46> foreach &control:SAML-Attribute-Value { > update reply { > SAML-AAA-Assertion += > '<saml:AttributeValue xsi:type="xs:string">' > SAML-AAA-Assertion += > "%{Foreach-Variable-0}" > SAML-AAA-Assertion += > '</saml:AttributeValue>' > } > } > update reply { > SAML-AAA-Assertion += '</saml:Attribute>' > } > } > } > > I can't see where I'm going wrong here... It's probably something > *very* obvious that I can't see. I'm using FreeRADIUS 3.0.15 (I know, I > know... It's not the newest). > > Can someone point out the obvious mistake? :-/ > > Thank you :-) > > Stefan Paetow > Consultant, Trust and Identity > > t: +44 (0)1235 822 125 > gpg: 0x3FCE5142 > xmpp: stefanp(a)jabber.dev.ja.net > skype: stefan.paetow.janet > > jisc.ac.uk > > Jisc is a registered charity (number 1149740) and a company limited by > guarantee which is registered in England under Company No. 5747339, VAT No. > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > Bristol, BS2 0JA. T 0203 697 5800. > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > ------------------------------ > > Message: 5 > Date: Fri, 10 Aug 2018 17:28:25 +0000 > From: Kevin Virk <Kevin.Virk(a)faithlife.com> > To: "freeradius-users(a)lists.freeradius.org" > <freeradius-users(a)lists.freeradius.org> > Subject: Re:Re: Accounting-Request packet shared secret fail (Alan > DeKok) (Kevin Virk) (Alan DeKok) > Message-ID: <1533922105253.29587(a)faithlife.com> > Content-Type: text/plain; charset=WINDOWS-1252 > > > I did make sure to restart the server. I did fail to mention that I purged > freeradius and reinstalled so I must have made a configuration error > somewhere along the way. > > > From: Freeradius-Users <freeradius-users-bounces+kevin.virk= > faithlife.com(a)lists.freeradius.org> on behalf of > freeradius-users-request(a)lists.freeradius.org < > freeradius-users-request(a)lists.freeradius.org> > Sent: Friday, August 10, 2018 1:30 AM > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius-Users Digest, Vol 160, Issue 14 > > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: ldap module for user and mac authentication (Dave Macias) > 2. Re: ldap module for user and mac authentication (Michael Ströder) > 3. Re: Accounting-Request packet shared secret fail (Alan DeKok) > (Kevin Virk) (Alan DeKok) > 4. Re: Dynamic vlan assignment (Dom Latter) > 5. Re: Freeradius-Users Digest, Vol 160, Issue 9 (Arun NP) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 9 Aug 2018 08:23:51 -0400 > From: Dave Macias <davama(a)gmail.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: ldap module for user and mac authentication > Message-ID: > <CA+nFYV_UOg+TuMMciVwPWTHUX5B=H=rbhpUE9mv_e+rsVDvCYw(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > > > > Yes, I had thought of something to the effect of (suggestions welcomed) : > > > > * if > > > (!"%{ldap:ldap://master1/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?cn?sub?(* > > *&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") {* > > * if > > > (!"%{ldap:ldap://master2/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?c* > > > *n?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > > {* > > * reject* > > * }* > > * }* > > * update {* > > * control:Auth-Type := Accept* > > * }* > > > > But this does not account for the scenario of openldap being dead. > > The 1st "if" statement will be always be FALSE and never attempt the next > > "if" statement and therefore 'Accept' > > > > I believe i misspoke here... > But interesting observations. > > if i use the below code AND have multiple ldap servers configured in my > ldap module, radius '%{ldap:ldap:///...}' will automatically go to the one > that is alive; assuming one is at least alive. IF i have just one ldap > server configured in my ldap module, (which is dead), then the 'if' will > FAIL and reject as it should. > > *if > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > {* > *reject* > *}* > *else {* > *update {* > *control:Auth-Type := Accept* > *}* > *}* > > Same results as above (ldap module will use the live ldap server, not the > dead one) > *if > > (!"%{ldap:ldap://dead-ldap-server/ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}")* > *...* > *...* > > So what did i learn? > you dont need to use the SRV record for failover, as long as you have all > the ldap servers in your ldap module. > > I think it makes sense since '%{ldap:...}" is using the ldap module, > technically, but i would have thought that "ldap:///" or > "ldap://dead-ldap-server/" meant localhost/dead-ldap-server not > "live.ldap.the-module-found' > > Or maybe im just completely off... > Hope that makes, sense. > > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) -> TRUE > (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { > (1) policy rewrite_calling_station_id { > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > { > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > -> TRUE > (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > { > (1) update request { > (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} > (1) --> 00-04-F2-DD-98-C6 > (1) &Calling-Station-Id := 00-04-F2-DD-98-C6 > (1) } # update request = noop > (1) [updated] = updated > (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ > > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) > = updated > (1) ... skipping else: Preceding "if" was taken > (1) } # policy rewrite_calling_station_id = updated > (1) if > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > { > rlm_ldap (ldap): Reserved connection (0) > (1) Performing search in "ou=sub-macs,ou=macs,dc=myorg,dc=net" with > filter "(&(objectClass=ieee802Device)(macAddress=00-04-F2-DD-98-C6))", > scope "sub" > (1) Waiting for search result... > rlm_ldap (ldap): Released connection (0) > Need 5 more connections to reach 10 spares > rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://ldap2:389 > TLSMC: MozNSS compatibility interception begins. > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is > present. > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > initialization. Continuing with OpenSSL only. > TLSMC: MozNSS compatibility interception ends. > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > (1) EXPAND > > %{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))} > (1) --> 0004f2dd98c6 > (1) if > > (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > -> FALSE > (1) else { > (1) update { > (1) control:Auth-Type := Accept > (1) } # update = noop > (1) } # else = noop > (1) } # if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) = > updated > (1) ... skipping else: Preceding "if" was taken > (1) [expiration] = noop > (1) [logintime] = noop > (1) pap: WARNING: Auth-Type already set. Not setting to PAP > (1) [pap] = noop > (1) } # authorize = updated > (1) Found Auth-Type = Accept > > > ------------------------------ > > Message: 2 > Date: Thu, 9 Aug 2018 14:40:04 +0200 > From: Michael Ströder <michael(a)stroeder.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org>, Dave Macias > <davama(a)gmail.com> > Subject: Re: ldap module for user and mac authentication > Message-ID: <7caaa8c6-5a4c-19b6-a59b-fa045992de8c(a)stroeder.com> > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > On 8/9/18 2:23 PM, Dave Macias wrote: > > So what did i learn? > > you dont need to use the SRV record for failover, as long as you have all > > the ldap servers in your ldap module. > > Yes! > > In theory the advantage of SRV RRs are that you can theoretically change > what's in your pool of LDAP servers and adjust priorities based on > locations. > > Besides that I don't believe anybody fully implemented that I'm not a > fan of SRV RRs anyway because the TLS hostname check is not even defined > for that. > > Ciao, Michael. > >

1 0

Re:Re: Accounting-Request packet shared secret fail (Alan DeKok) (Kevin Virk) (Alan DeKok)
by Kevin Virk 10 Aug '18

10 Aug '18

I did make sure to restart the server. I did fail to mention that I purged freeradius and reinstalled so I must have made a configuration error somewhere along the way. From: Freeradius-Users <freeradius-users-bounces+kevin.virk=faithlife.com(a)lists.freeradius.org> on behalf of freeradius-users-request(a)lists.freeradius.org <freeradius-users-request(a)lists.freeradius.org> Sent: Friday, August 10, 2018 1:30 AM To: freeradius-users(a)lists.freeradius.org Subject: Freeradius-Users Digest, Vol 160, Issue 14 Send Freeradius-Users mailing list submissions to freeradius-users(a)lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request(a)lists.freeradius.org You can reach the person managing the list at freeradius-users-owner(a)lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: ldap module for user and mac authentication (Dave Macias) 2. Re: ldap module for user and mac authentication (Michael Ströder) 3. Re: Accounting-Request packet shared secret fail (Alan DeKok) (Kevin Virk) (Alan DeKok) 4. Re: Dynamic vlan assignment (Dom Latter) 5. Re: Freeradius-Users Digest, Vol 160, Issue 9 (Arun NP) ---------------------------------------------------------------------- Message: 1 Date: Thu, 9 Aug 2018 08:23:51 -0400 From: Dave Macias <davama(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: ldap module for user and mac authentication Message-ID: <CA+nFYV_UOg+TuMMciVwPWTHUX5B=H=rbhpUE9mv_e+rsVDvCYw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" > > Yes, I had thought of something to the effect of (suggestions welcomed) : > > * if > (!"%{ldap:ldap://master1/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?cn?sub?(* > *&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") {* > * if > (!"%{ldap:ldap://master2/ou=%{client:shortname},ou=macs,dc=myorg,dc=net?c* > *n?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") > {* > * reject* > * }* > * }* > * update {* > * control:Auth-Type := Accept* > * }* > > But this does not account for the scenario of openldap being dead. > The 1st "if" statement will be always be FALSE and never attempt the next > "if" statement and therefore 'Accept' > I believe i misspoke here... But interesting observations. if i use the below code AND have multiple ldap servers configured in my ldap module, radius '%{ldap:ldap:///...}' will automatically go to the one that is alive; assuming one is at least alive. IF i have just one ldap server configured in my ldap module, (which is dead), then the 'if' will FAIL and reject as it should. *if (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") {* *reject* *}* *else {* *update {* *control:Auth-Type := Accept* *}* *}* Same results as above (ldap module will use the live ldap server, not the dead one) *if (!"%{ldap:ldap://dead-ldap-server/ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}")* *...* *...* So what did i learn? you dont need to use the SRV record for failover, as long as you have all the ldap servers in your ldap module. I think it makes sense since '%{ldap:...}" is using the ldap module, technically, but i would have thought that "ldap:///" or "ldap://dead-ldap-server/" meant localhost/dead-ldap-server not "live.ldap.the-module-found' Or maybe im just completely off... Hope that makes, sense. (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) -> TRUE (1) if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) { (1) policy rewrite_calling_station_id { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> 00-04-F2-DD-98-C6 (1) &Calling-Station-Id := 00-04-F2-DD-98-C6 (1) } # update request = noop (1) [updated] = updated (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_calling_station_id = updated (1) if (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") { rlm_ldap (ldap): Reserved connection (0) (1) Performing search in "ou=sub-macs,ou=macs,dc=myorg,dc=net" with filter "(&(objectClass=ieee802Device)(macAddress=00-04-F2-DD-98-C6))", scope "sub" (1) Waiting for search result... rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://ldap2:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) EXPAND %{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))} (1) --> 0004f2dd98c6 (1) if (!"%{ldap:ldap:///ou=%{client:shortname},ou=macs,dc=datacom,dc=net?cn?sub?(&(objectClass=ieee802Device)(macAddress=%{Calling-Station-Id}))}") -> FALSE (1) else { (1) update { (1) control:Auth-Type := Accept (1) } # update = noop (1) } # else = noop (1) } # if (&NAS-Port-Type == "Ethernet" && &Calling-Station-Id) = updated (1) ... skipping else: Preceding "if" was taken (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = Accept ------------------------------ Message: 2 Date: Thu, 9 Aug 2018 14:40:04 +0200 From: Michael Ströder <michael(a)stroeder.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org>, Dave Macias <davama(a)gmail.com> Subject: Re: ldap module for user and mac authentication Message-ID: <7caaa8c6-5a4c-19b6-a59b-fa045992de8c(a)stroeder.com> Content-Type: text/plain; charset="utf-8"; Format="flowed" On 8/9/18 2:23 PM, Dave Macias wrote: > So what did i learn? > you dont need to use the SRV record for failover, as long as you have all > the ldap servers in your ldap module. Yes! In theory the advantage of SRV RRs are that you can theoretically change what's in your pool of LDAP servers and adjust priorities based on locations. Besides that I don't believe anybody fully implemented that I'm not a fan of SRV RRs anyway because the TLS hostname check is not even defined for that. Ciao, Michael.

1 0