September 2018 - Freeradius-Users - lists.freeradius.org

Stale Sessions Freeradius 3.0
by Ryan Raamsumair 10 Sep '18

10 Sep '18

I previously ran freeradius 2 incident free , having recently upgraded to freeradius 3 . I am bogged down with stale sessions freeradius is already the newest version (3.0.12+dfsg-5+deb9u1). The Nas are linksys accesspoints running on openwrt If the user manually disconnects from the network , and acctstop is updated and the records close properly , but if the person walks away from the network no update is made ####################################################################################################################################### Here is a snippet from the radacct table 138 5B801D36-00000A2C e43af52ec2774d18313225d069f615ec aarti_lutchmiesingh 161.0.155.238 9 Wireless-802.11 05/09/2018 10:23 05/09/2018 10:23 NULL NULL 0 RADIUS CONNECT 54Mbps 802.11g 0 0 00-25-9C-13-AF-58:Ryan 9 - Radius 10-F1-F2-0D-BC-43 168 5B801C20-00000E97 a893aa385671e09334072372c0904fdb abd-al-qaadir_islam 161.0.155.238 9 Wireless-802.11 05/09/2018 10:30 05/09/2018 10:30 NULL NULL 0 RADIUS CONNECT 54Mbps 802.11g 0 0 00-25-9C-13-AF-58:Ryan 9 - Radius 10-F1-F2-0D-BC-43 You would have expected that because the calling station id is the same in both records that freeradius would have declared the older record a stale session ###############################################freeradius -X########################################################################## FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expiration including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "cisco" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL " simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, #framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND callingstationid = '%{Calling-Station-Id}'AND acctstarttime IS NOT FROM_UNIXTIME(%{integer:Event-Timestamp})" } stop { query = "INSERT INTO radacctold SELECT * FROM radacct WHERE acctstoptime <> 'NULL'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration instantiate { } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.26-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" disable_tlsv1_2 = yes cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Ready to process requests (0) Received Access-Request Id 59 from 131.100.39.166:51503 to 198.58.110.29:1812 length 239 (0) User-Name = "sharisse_pragsingh" (0) NAS-Identifier = "Ryan4-2ghz-Radius" (0) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) NAS-Port = 14 (0) Calling-Station-Id = "80-4E-81-86-03-C5" (0) Connect-Info = "CONNECT 54Mbps 802.11g" (0) Acct-Session-Id = "B15D601DE21D9FFF" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02b400170173686172697373655f7072616773696e6768 (0) Message-Authenticator = 0x8d98008fc1b0cc92a987b3e7b23c0696 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "sharisse_pragsingh", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 180 length 23 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 181 length 22 (0) eap: EAP session adding &reply:State = 0x5adb3d025a6e3931 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 59 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (0) EAP-Message = 0x01b50016041063537c4fe2a0c46f29a02d18749c41c7 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x5adb3d025a6e3931aa88cfc6895d11e4 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 60 from 131.100.39.166:51503 to 198.58.110.29:1812 length 240 (1) User-Name = "sharisse_pragsingh" (1) NAS-Identifier = "Ryan4-2ghz-Radius" (1) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) NAS-Port = 14 (1) Calling-Station-Id = "80-4E-81-86-03-C5" (1) Connect-Info = "CONNECT 54Mbps 802.11g" (1) Acct-Session-Id = "B15D601DE21D9FFF" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02b500060319 (1) State = 0x5adb3d025a6e3931aa88cfc6895d11e4 (1) Message-Authenticator = 0xb38a6583f2c160efa5d419c5b2d8454e (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "sharisse_pragsingh", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 181 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (1) sql: --> sharisse_pragsingh (1) sql: SQL-User-Name set to 'sharisse_pragsingh' rlm_sql (sql): Reserved connection (1) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'sharisse_pragsingh' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'sharisse_pragsingh' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'sharisse_pragsingh' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'sharisse_pragsingh' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (1) rlm_sql (sql): Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (1) [sql] = notfound (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (1) pap: WARNING: Authentication will fail unless a "known good" password is available (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x5adb3d025a6e3931 (1) eap: Finished EAP session with state 0x5adb3d025a6e3931 (1) eap: Previous EAP request found for state 0x5adb3d025a6e3931, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 182 length 6 (1) eap: EAP session adding &reply:State = 0x5adb3d025b6d2431 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 60 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (1) EAP-Message = 0x01b600061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x5adb3d025b6d2431aa88cfc6895d11e4 (1) Finished request Waking up in 4.9 seconds. ^C root@box:~# freeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expiration including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "cisco" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL " simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, #framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND callingstationid = '%{Calling-Station-Id}'AND acctstarttime IS NOT FROM_UNIXTIME(%{integer:Event-Timestamp})" } stop { query = "INSERT INTO radacctold SELECT * FROM radacct WHERE acctstoptime <> 'NULL'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration instantiate { } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.26-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" disable_tlsv1_2 = yes cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Ready to process requests (0) Received Access-Request Id 61 from 131.100.39.166:51503 to 198.58.110.29:1812 length 430 (0) User-Name = "sharisse_pragsingh" (0) NAS-Identifier = "Ryan4-2ghz-Radius" (0) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) NAS-Port = 14 (0) Calling-Station-Id = "80-4E-81-86-03-C5" (0) Connect-Info = "CONNECT 54Mbps 802.11g" (0) Acct-Session-Id = "B15D601DE21D9FFF" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02b600c41980000000ba16030100b5010000b10301b03b81650d6cb379ba73d735073391bb8f9fbe87e64f28a843146c2c68a40a30000048c014c00a00390038c00fc0050035c013c00900330032c00ec004002fc011c007c00cc00200050004c012c00800160013c00dc003000a001500120009001400 (0) State = 0x5adb3d025b6d2431aa88cfc6895d11e4 (0) Message-Authenticator = 0x004581f9ac8035ff327e927eece6eb4d (0) session-state: No cached attributes (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "sharisse_pragsingh", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 182 length 196 (0) eap: Continuing tunnel setup (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { rlm_eap (EAP): No EAP session matching state 0x5adb3d025b6d2431 (0) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (0) eap: Failed in handler (0) [eap] = invalid (0) } # authenticate = invalid (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (0) sql: --> sharisse_pragsingh (0) sql: SQL-User-Name set to 'sharisse_pragsingh' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'sharisse_pragsingh', '', 'Access-Reject', '2018-09-05 13:02:17') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'sharisse_pragsingh', '', 'Access-Reject', '2018-09-05 13:02:17') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) rlm_sql (sql): Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> sharisse_pragsingh (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated rlm_eap (EAP): No EAP session matching state 0x5adb3d025b6d2431 (0) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (0) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.6 seconds. Waking up in 0.3 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 61 from 198.58.110.29:1812 to 131.100.39.166:51503 length 20 Waking up in 3.9 seconds. (1) Received Access-Request Id 62 from 131.100.39.166:51503 to 198.58.110.29:1812 length 231 (1) User-Name = "victoria_ghool" (1) NAS-Identifier = "Ryan4-2ghz-Radius" (1) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) NAS-Port = 15 (1) Calling-Station-Id = "14-B4-84-40-1F-DC" (1) Connect-Info = "CONNECT 54Mbps 802.11g" (1) Acct-Session-Id = "CEF73F6854ED0E37" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x027a001301766963746f7269615f67686f6f6c (1) Message-Authenticator = 0x6947e9245c529271a1a96a6c359860c0 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 122 length 19 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 123 length 22 (1) eap: EAP session adding &reply:State = 0xc71cb679c767b212 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 62 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (1) EAP-Message = 0x017b00160410587eb3fc850295c3b88924853c914dcb (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc71cb679c767b212581da811d62e0aa7 (1) Finished request Waking up in 3.2 seconds. (2) Received Access-Request Id 63 from 131.100.39.166:51503 to 198.58.110.29:1812 length 236 (2) User-Name = "victoria_ghool" (2) NAS-Identifier = "Ryan4-2ghz-Radius" (2) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) NAS-Port = 15 (2) Calling-Station-Id = "14-B4-84-40-1F-DC" (2) Connect-Info = "CONNECT 54Mbps 802.11g" (2) Acct-Session-Id = "CEF73F6854ED0E37" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x027b00060319 (2) State = 0xc71cb679c767b212581da811d62e0aa7 (2) Message-Authenticator = 0xd84dde2206036377d997e5645602c63a (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 123 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (2) sql: --> victoria_ghool (2) sql: SQL-User-Name set to 'victoria_ghool' rlm_sql (sql): Reserved connection (2) (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (2) sql: User found in radcheck table (2) sql: Conditional check items matched, merging assignment check items (2) sql: Cleartext-Password := "WaterFalls16" (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (2) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (2) sql: --> SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (2) sql: User found in the group table (2) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (2) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (2) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (2) sql: Group "dialup": Conditional check items matched (2) sql: Group "dialup": Merging assignment check items (2) sql: Simultaneous-Use := 200 (2) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (2) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (2) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (2) sql: Group "dialup": Merging reply items rlm_sql (sql): Released connection (2) rlm_sql (sql): Need 3 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (2) [sql] = ok (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc71cb679c767b212 (2) eap: Finished EAP session with state 0xc71cb679c767b212 (2) eap: Previous EAP request found for state 0xc71cb679c767b212, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new EAP-TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 124 length 6 (2) eap: EAP session adding &reply:State = 0xc71cb679c660af12 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 63 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (2) EAP-Message = 0x017c00061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc71cb679c660af12581da811d62e0aa7 (2) Finished request Waking up in 3.2 seconds. (3) Received Access-Request Id 64 from 131.100.39.166:51503 to 198.58.110.29:1812 length 438 (3) User-Name = "victoria_ghool" (3) NAS-Identifier = "Ryan4-2ghz-Radius" (3) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) NAS-Port = 15 (3) Calling-Station-Id = "14-B4-84-40-1F-DC" (3) Connect-Info = "CONNECT 54Mbps 802.11g" (3) Acct-Session-Id = "CEF73F6854ED0E37" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x027c00d01980000000c616030100c1010000bd03015b900c1abde6f6c0ff7fe300f1015c8d8878387a955d4741fc03394c80d0b5a8000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc00200 (3) State = 0xc71cb679c660af12581da811d62e0aa7 (3) Message-Authenticator = 0x71a1c7e0502fa99ef80aad9d09ae88cc (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 124 length 208 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc71cb679c660af12 (3) eap: Finished EAP session with state 0xc71cb679c660af12 (3) eap: Previous EAP request found for state 0xc71cb679c660af12, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 198 bytes (3) eap_peap: Got complete TLS record (198 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: <<< recv TLS 1.2 [length 00c1] (3) eap_peap: TLS_accept: SSLv3/TLS read client hello (3) eap_peap: >>> send TLS 1.0 Handshake [length 0039], ServerHello (3) eap_peap: TLS_accept: SSLv3/TLS write server hello (3) eap_peap: >>> send TLS 1.0 Handshake [length 02fd], Certificate (3) eap_peap: TLS_accept: SSLv3/TLS write certificate (3) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (3) eap_peap: TLS_accept: SSLv3/TLS write key exchange (3) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: In SSL Handshake Phase (3) eap_peap: In SSL Accept mode (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 125 length 1004 (3) eap: EAP session adding &reply:State = 0xc71cb679c561af12 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 64 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (3) EAP-Message = 0x017d03ec19c00000049916030100390200003503010f4b49d9df3b30f484e30a9bee297f36fdcd022c065c567b3fa4e9da8980a0e900c01400000dff01000100000b00040300010216030102fd0b0002f90002f60002f3308202ef308201d7a00302010202090093b40acbed3d0944300d06092a864886 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc71cb679c561af12581da811d62e0aa7 (3) Finished request Waking up in 3.0 seconds. (4) Received Access-Request Id 65 from 131.100.39.166:51503 to 198.58.110.29:1812 length 236 (4) User-Name = "victoria_ghool" (4) NAS-Identifier = "Ryan4-2ghz-Radius" (4) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) NAS-Port = 15 (4) Calling-Station-Id = "14-B4-84-40-1F-DC" (4) Connect-Info = "CONNECT 54Mbps 802.11g" (4) Acct-Session-Id = "CEF73F6854ED0E37" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x027d00061900 (4) State = 0xc71cb679c561af12581da811d62e0aa7 (4) Message-Authenticator = 0x9e0cf5f848a983a0a9cd18e98d71905b (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 125 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xc71cb679c561af12 (4) eap: Finished EAP session with state 0xc71cb679c561af12 (4) eap: Previous EAP request found for state 0xc71cb679c561af12, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 126 length 189 (4) eap: EAP session adding &reply:State = 0xc71cb679c462af12 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 65 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (4) EAP-Message = 0x017e00bd19004968fea2c5fdcee3fd5be12cf2782d130c9b165bd5e59681b1f2c8def9f0a730517a9dc0d7a47088149b7729b044838e53b0b2257179da8577bb6818004b4069fbb947f4ca24c61b2263f141f0da55088156257549347ddec48a790f4221680f7a9ef2943859b0b627a90ffe7217399d1e (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc71cb679c462af12581da811d62e0aa7 (4) Finished request Waking up in 2.9 seconds. (5) Received Access-Request Id 66 from 131.100.39.166:51503 to 198.58.110.29:1812 length 374 (5) User-Name = "victoria_ghool" (5) NAS-Identifier = "Ryan4-2ghz-Radius" (5) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) NAS-Port = 15 (5) Calling-Station-Id = "14-B4-84-40-1F-DC" (5) Connect-Info = "CONNECT 54Mbps 802.11g" (5) Acct-Session-Id = "CEF73F6854ED0E37" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x027e009019800000008616030100461000004241041eea0b672ce9470e959ca5b2c3c1d3f70f8442cd51ace441ebfc536505f80e306265431fd3115f3bac064503060d272bc1ad184a2b83a46735a92195e1d0e8be14030100010116030100300a4c5d7cba81d687d1ba355636194f71abc703d87e923d (5) State = 0xc71cb679c462af12581da811d62e0aa7 (5) Message-Authenticator = 0xe049f18183792f7d027fa2dacc74367a (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 126 length 144 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xc71cb679c462af12 (5) eap: Finished EAP session with state 0xc71cb679c462af12 (5) eap: Previous EAP request found for state 0xc71cb679c462af12, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes (5) eap_peap: Got complete TLS record (134 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: TLS_accept: SSLv3/TLS write server done (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3/TLS read finished (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3/TLS write finished (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 127 length 65 (5) eap: EAP session adding &reply:State = 0xc71cb679c363af12 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 66 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (5) EAP-Message = 0x017f004119001403010001011603010030aafc4e1f3e70822a01839414449efaa8f10398f15118b7b64a47bc5f60a90ab1e44f83305881591220fb6973efdde0c2 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xc71cb679c363af12581da811d62e0aa7 (5) Finished request Waking up in 2.8 seconds. (6) Received Access-Request Id 67 from 131.100.39.166:51503 to 198.58.110.29:1812 length 236 (6) User-Name = "victoria_ghool" (6) NAS-Identifier = "Ryan4-2ghz-Radius" (6) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) NAS-Port = 15 (6) Calling-Station-Id = "14-B4-84-40-1F-DC" (6) Connect-Info = "CONNECT 54Mbps 802.11g" (6) Acct-Session-Id = "CEF73F6854ED0E37" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x027f00061900 (6) State = 0xc71cb679c363af12581da811d62e0aa7 (6) Message-Authenticator = 0x5f31b1ca41ac472e209f89eb73871d30 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 127 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xc71cb679c363af12 (6) eap: Finished EAP session with state 0xc71cb679c363af12 (6) eap: Previous EAP request found for state 0xc71cb679c363af12, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 128 length 43 (6) eap: EAP session adding &reply:State = 0xc71cb679c29caf12 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 67 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (6) EAP-Message = 0x0180002b190017030100203c45cd1af0cfec87b4097b018f98e0a2b7b2c071ed2d3739878a9f76661bd858 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xc71cb679c29caf12581da811d62e0aa7 (6) Finished request Waking up in 2.7 seconds. (7) Received Access-Request Id 68 from 131.100.39.166:51503 to 198.58.110.29:1812 length 326 (7) User-Name = "victoria_ghool" (7) NAS-Identifier = "Ryan4-2ghz-Radius" (7) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) NAS-Port = 15 (7) Calling-Station-Id = "14-B4-84-40-1F-DC" (7) Connect-Info = "CONNECT 54Mbps 802.11g" (7) Acct-Session-Id = "CEF73F6854ED0E37" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x0280006019001703010020ce67d91a2bbfa70039f17489dac9d9706b096712c8615e170bc14a27c3cfc9961703010030c4b2434771097f53eaeaa9fb73fd74dea58ec4d6d2538ef34719a8e4dfb7dc7f351b2f88f02f4d6ccf061ec572902934 (7) State = 0xc71cb679c29caf12581da811d62e0aa7 (7) Message-Authenticator = 0x7d16dafcd8b302cf3175badc535a5001 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 128 length 96 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xc71cb679c29caf12 (7) eap: Finished EAP session with state 0xc71cb679c29caf12 (7) eap: Previous EAP request found for state 0xc71cb679c29caf12, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - victoria_ghool (7) eap_peap: Got inner identity 'victoria_ghool' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0280001301766963746f7269615f67686f6f6c (7) eap_peap: Setting User-Name to victoria_ghool (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0280001301766963746f7269615f67686f6f6c (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "victoria_ghool" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0280001301766963746f7269615f67686f6f6c (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "victoria_ghool" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 128 length 19 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 129 length 43 (7) eap: EAP session adding &reply:State = 0x6581a8b46500b26d (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0181002b1a0181002610808cabf382627e81820ea15bfbaba6c7667265657261646975732d332e302e3132 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x6581a8b46500b26d4c1af2a42017fb07 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0181002b1a0181002610808cabf382627e81820ea15bfbaba6c7667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x6581a8b46500b26d4c1af2a42017fb07 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0181002b1a0181002610808cabf382627e81820ea15bfbaba6c7667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x6581a8b46500b26d4c1af2a42017fb07 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 129 length 75 (7) eap: EAP session adding &reply:State = 0xc71cb679c19daf12 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 68 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (7) EAP-Message = 0x0181004b19001703010040c0f93c1efe819bde1f8e4b8963983def94ca8413d9d4906aa24a0b8d9801a16a7806dae013613bebaaa9771d490e93b0e92e9cc012179adb4f28ec55ab77bebc (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xc71cb679c19daf12581da811d62e0aa7 (7) Finished request Waking up in 2.6 seconds. (8) Received Access-Request Id 69 from 131.100.39.166:51503 to 198.58.110.29:1812 length 374 (8) User-Name = "victoria_ghool" (8) NAS-Identifier = "Ryan4-2ghz-Radius" (8) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) NAS-Port = 15 (8) Calling-Station-Id = "14-B4-84-40-1F-DC" (8) Connect-Info = "CONNECT 54Mbps 802.11g" (8) Acct-Session-Id = "CEF73F6854ED0E37" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x0281009019001703010020df6d7a0000dcf7cc20a56a5368b647a0b6cec88cf6d8f74c2e2b8dbc0b911e5917030100608bbbc2935bb16e42046a6b6361af98d62a8a9d8e72b01c52ecdaa8ad3ff528175f9530750744ee5c1f583f2235ae0845aa5114e78c61abd52ec36d574d8ae17ae660273165dfca (8) State = 0xc71cb679c19daf12581da811d62e0aa7 (8) Message-Authenticator = 0xb8bcc788e454b8050fa7261dafa266ae (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 129 length 144 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x6581a8b46500b26d (8) eap: Finished EAP session with state 0xc71cb679c19daf12 (8) eap: Previous EAP request found for state 0xc71cb679c19daf12, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x028100491a0281004431e717f6003bf96983c5c6510c1bb72230000000000000000064bb35523924120e94c7e0a57fd5ca1b6854cfe15242ab5000766963746f7269615f67686f6f6c (8) eap_peap: Setting User-Name to victoria_ghool (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x028100491a0281004431e717f6003bf96983c5c6510c1bb72230000000000000000064bb35523924120e94c7e0a57fd5ca1b6854cfe15242ab5000766963746f7269615f67686f6f6c (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "victoria_ghool" (8) eap_peap: State = 0x6581a8b46500b26d4c1af2a42017fb07 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x028100491a0281004431e717f6003bf96983c5c6510c1bb72230000000000000000064bb35523924120e94c7e0a57fd5ca1b6854cfe15242ab5000766963746f7269615f67686f6f6c (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "victoria_ghool" (8) State = 0x6581a8b46500b26d4c1af2a42017fb07 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 129 length 73 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (8) sql: --> victoria_ghool (8) sql: SQL-User-Name set to 'victoria_ghool' rlm_sql (sql): Reserved connection (3) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (8) sql: User found in radcheck table (8) sql: Conditional check items matched, merging assignment check items (8) sql: Cleartext-Password := "WaterFalls16" (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (8) sql: User found in the group table (8) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (8) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (8) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (8) sql: Group "dialup": Conditional check items matched (8) sql: Group "dialup": Merging assignment check items (8) sql: Simultaneous-Use := 200 (8) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (8) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (8) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (8) sql: Group "dialup": Merging reply items rlm_sql (sql): Released connection (3) rlm_sql (sql): Need 2 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (8), 1 of 24 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (8) [sql] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x6581a8b46500b26d (8) eap: Finished EAP session with state 0x6581a8b46500b26d (8) eap: Previous EAP request found for state 0x6581a8b46500b26d, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: Found Cleartext-Password, hashing to create NT-Password (8) mschap: Found Cleartext-Password, hashing to create LM-Password (8) mschap: Creating challenge hash with username: victoria_ghool (8) mschap: Client is using MS-CHAPv2 (8) mschap: Adding MS-CHAPv2 MPPE keys (8) [mschap] = ok (8) } # authenticate = ok (8) MSCHAP Success (8) eap: Sending EAP Request (code 1) ID 130 length 51 (8) eap: EAP session adding &reply:State = 0x6581a8b46403b26d (8) [eap] = handled (8) } # authenticate = handled (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x018200331a0381002e533d36383835433941383230374535354644323637313932433135343339423931443733444345364444 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x6581a8b46403b26d4c1af2a42017fb07 (8) eap_peap: Got tunneled reply code 11 (8) eap_peap: EAP-Message = 0x018200331a0381002e533d36383835433941383230374535354644323637313932433135343339423931443733444345364444 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x6581a8b46403b26d4c1af2a42017fb07 (8) eap_peap: Got tunneled reply RADIUS code 11 (8) eap_peap: EAP-Message = 0x018200331a0381002e533d36383835433941383230374535354644323637313932433135343339423931443733444345364444 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x6581a8b46403b26d4c1af2a42017fb07 (8) eap_peap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 130 length 91 (8) eap: EAP session adding &reply:State = 0xc71cb679c09eaf12 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Sent Access-Challenge Id 69 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (8) EAP-Message = 0x0182005b19001703010050a985e34fc1a70f310df4ef5e3b72f605227538370fb8d892624aca33ba5350b9bee8967259ebefe47093f381633227250ae0442af6513adb3a48a0997c64139f77e0d026024266b2a7f16ebb6b24ce8c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xc71cb679c09eaf12581da811d62e0aa7 (8) Finished request Waking up in 2.5 seconds. (9) Received Access-Request Id 70 from 131.100.39.166:51503 to 198.58.110.29:1812 length 310 (9) User-Name = "victoria_ghool" (9) NAS-Identifier = "Ryan4-2ghz-Radius" (9) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) NAS-Port = 15 (9) Calling-Station-Id = "14-B4-84-40-1F-DC" (9) Connect-Info = "CONNECT 54Mbps 802.11g" (9) Acct-Session-Id = "CEF73F6854ED0E37" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Framed-MTU = 1400 (9) EAP-Message = 0x0282005019001703010020e7954ce1237c93bc33c537ee5de1cdf3c989932a72c5f7c1d390e81f4f4967f2170301002005669fd4c14eb3cf382aeceb5559628fbe5fdbb9c1a022a9cc280ff0a977b2f0 (9) State = 0xc71cb679c09eaf12581da811d62e0aa7 (9) Message-Authenticator = 0xb37e6b3b50cda656f799fa7e720e8d3c (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 130 length 80 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x6581a8b46403b26d (9) eap: Finished EAP session with state 0xc71cb679c09eaf12 (9) eap: Previous EAP request found for state 0xc71cb679c09eaf12, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x028200061a03 (9) eap_peap: Setting User-Name to victoria_ghool (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x028200061a03 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "victoria_ghool" (9) eap_peap: State = 0x6581a8b46403b26d4c1af2a42017fb07 (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x028200061a03 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "victoria_ghool" (9) State = 0x6581a8b46403b26d4c1af2a42017fb07 (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) eap: Peer sent EAP Response (code 2) ID 130 length 6 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (9) sql: --> victoria_ghool (9) sql: SQL-User-Name set to 'victoria_ghool' rlm_sql (sql): Reserved connection (4) (9) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (9) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (9) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'victoria_ghool' ORDER BY id (9) sql: User found in radcheck table (9) sql: Conditional check items matched, merging assignment check items (9) sql: Cleartext-Password := "WaterFalls16" (9) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (9) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (9) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'victoria_ghool' ORDER BY id (9) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (9) sql: --> SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (9) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'victoria_ghool' ORDER BY priority (9) sql: User found in the group table (9) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (9) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (9) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (9) sql: Group "dialup": Conditional check items matched (9) sql: Group "dialup": Merging assignment check items (9) sql: Simultaneous-Use := 200 (9) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (9) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (9) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (9) sql: Group "dialup": Merging reply items rlm_sql (sql): Released connection (4) (9) [sql] = ok (9) [expiration] = noop (9) [logintime] = noop (9) pap: WARNING: Auth-Type already set. Not setting to PAP (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Expiring EAP session with state 0x6581a8b46403b26d (9) eap: Finished EAP session with state 0x6581a8b46403b26d (9) eap: Previous EAP request found for state 0x6581a8b46403b26d, released from the list (9) eap: Peer sent packet with method EAP MSCHAPv2 (26) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap: Sending EAP Success (code 3) ID 130 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section session from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) session { (9) radutmp: EXPAND /var/log/freeradius/radutmp (9) radutmp: --> /var/log/freeradius/radutmp (9) radutmp: EXPAND %{User-Name} (9) radutmp: --> victoria_ghool (9) [radutmp] = ok (9) } # session = ok (9) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) post-auth { (9) sql: EXPAND .query (9) sql: --> .query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (0) (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (9) sql: --> victoria_ghool (9) sql: SQL-User-Name set to 'victoria_ghool' (9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (9) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'victoria_ghool', '', 'Access-Accept', '2018-09-05 13:02:20') (9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'victoria_ghool', '', 'Access-Accept', '2018-09-05 13:02:20') (9) sql: SQL query returned: success (9) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) (9) [sql] = ok (9) } # post-auth = ok (9) } # server inner-tunnel (9) Virtual server sending reply (9) MS-MPPE-Encryption-Policy = Encryption-Allowed (9) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) MS-MPPE-Send-Key = 0x0b4231615ae3e7fd3094e5d39de5f7c7 (9) MS-MPPE-Recv-Key = 0xe1301e846fcad9a1bf19018c4c9685e5 (9) EAP-Message = 0x03820004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "victoria_ghool" (9) eap_peap: Got tunneled reply code 2 (9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (9) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) eap_peap: MS-MPPE-Send-Key = 0x0b4231615ae3e7fd3094e5d39de5f7c7 (9) eap_peap: MS-MPPE-Recv-Key = 0xe1301e846fcad9a1bf19018c4c9685e5 (9) eap_peap: EAP-Message = 0x03820004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: User-Name = "victoria_ghool" (9) eap_peap: Got tunneled reply RADIUS code 2 (9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (9) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) eap_peap: MS-MPPE-Send-Key = 0x0b4231615ae3e7fd3094e5d39de5f7c7 (9) eap_peap: MS-MPPE-Recv-Key = 0xe1301e846fcad9a1bf19018c4c9685e5 (9) eap_peap: EAP-Message = 0x03820004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: User-Name = "victoria_ghool" (9) eap_peap: Tunneled authentication was successful (9) eap_peap: SUCCESS (9) eap: Sending EAP Request (code 1) ID 131 length 43 (9) eap: EAP session adding &reply:State = 0xc71cb679cf9faf12 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) Post-Auth-Type sub-section not found. Ignoring. (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Sent Access-Challenge Id 70 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (9) EAP-Message = 0x0183002b19001703010020896019e97c4c517d4b43048455c6d4b24634455babf837c0f3c810cba91b4dee (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xc71cb679cf9faf12581da811d62e0aa7 (9) Finished request Waking up in 2.4 seconds. (10) Received Access-Request Id 71 from 131.100.39.166:51503 to 198.58.110.29:1812 length 310 (10) User-Name = "victoria_ghool" (10) NAS-Identifier = "Ryan4-2ghz-Radius" (10) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) NAS-Port = 15 (10) Calling-Station-Id = "14-B4-84-40-1F-DC" (10) Connect-Info = "CONNECT 54Mbps 802.11g" (10) Acct-Session-Id = "CEF73F6854ED0E37" (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027073 (10) Framed-MTU = 1400 (10) EAP-Message = 0x028300501900170301002030b46d3fb23de6d64752535400d6c85cc571b653dff298fa8e02b035b81af742170301002098a80a7152effcca6ce046b82f56bac2f0b6a0401152ef8d0913b759967467c2 (10) State = 0xc71cb679cf9faf12581da811d62e0aa7 (10) Message-Authenticator = 0x8d8212058640174b75086cdc61a75764 (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 131 length 80 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xc71cb679cf9faf12 (10) eap: Finished EAP session with state 0xc71cb679cf9faf12 (10) eap: Previous EAP request found for state 0xc71cb679cf9faf12, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state send tlv success (10) eap_peap: Received EAP-TLV response (10) eap_peap: Success (10) eap: Sending EAP Success (code 3) ID 131 length 4 (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (10) post-auth { (10) update { (10) No attributes updated (10) } # update = noop (10) sql: EXPAND .query (10) sql: --> .query (10) sql: Using query template 'query' rlm_sql (sql): Reserved connection (5) (10) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (10) sql: --> victoria_ghool (10) sql: SQL-User-Name set to 'victoria_ghool' (10) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (10) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'victoria_ghool', '', 'Access-Accept', '2018-09-05 13:02:20') (10) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'victoria_ghool', '', 'Access-Accept', '2018-09-05 13:02:20') (10) sql: SQL query returned: success (10) sql: 1 record(s) updated rlm_sql (sql): Released connection (5) (10) [sql] = ok (10) [exec] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # post-auth = ok (10) Sent Access-Accept Id 71 from 198.58.110.29:1812 to 131.100.39.166:51503 length 0 (10) MS-MPPE-Recv-Key = 0xdf747ac6983392d3d7afa992005a997ce771acde2adb324435a5122646fd4a62 (10) MS-MPPE-Send-Key = 0xf261857a7080c8e095f9530acf7b2544aa4c30094dd9a66ba546c29181ad9472 (10) EAP-Message = 0x03830004 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) User-Name = "victoria_ghool" (10) Finished request Waking up in 2.3 seconds. (11) Received Accounting-Request Id 72 from 131.100.39.166:64857 to 198.58.110.29:1813 length 210 (11) Acct-Status-Type = Start (11) Acct-Authentic = RADIUS (11) User-Name = "victoria_ghool" (11) NAS-Identifier = "Ryan4-2ghz-Radius" (11) Called-Station-Id = "16-91-82-C6-38-F7:Ryan4-Radius-N" (11) NAS-Port-Type = Wireless-802.11 (11) Service-Type = Framed-User (11) NAS-Port = 15 (11) Calling-Station-Id = "14-B4-84-40-1F-DC" (11) Connect-Info = "CONNECT 54Mbps 802.11g" (11) Acct-Session-Id = "CEF73F6854ED0E37" (11) WLAN-Pairwise-Cipher = 1027076 (11) WLAN-Group-Cipher = 1027076 (11) WLAN-AKM-Suite = 1027073 (11) Event-Timestamp = "Sep 5 2018 13:02:20 AST" (11) Acct-Delay-Time = 0 (11) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (11) preacct { (11) [preprocess] = ok (11) policy acct_unique { (11) update request { (11) Tmp-String-9 := "ai:" (11) } # update request = noop (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (11) EXPAND %{hex:&Class} (11) --> (11) EXPAND ^%{hex:&Tmp-String-9} (11) --> ^61693a (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (11) else { (11) update request { (11) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (11) --> 5ffef8deb1d414c7ab9813cb06977e5a (11) &Acct-Unique-Session-Id := 5ffef8deb1d414c7ab9813cb06977e5a (11) } # update request = noop (11) } # else = noop (11) } # policy acct_unique = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "victoria_ghool", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) [files] = noop (11) } # preacct = ok (11) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (11) accounting { (11) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (11) detail: --> /var/log/freeradius/radacct/131.100.39.166/detail-20180905 (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/131.100.39.166/detail-20180905 (11) detail: EXPAND %t (11) detail: --> Wed Sep 5 13:02:20 2018 (11) [detail] = ok (11) [unix] = ok (11) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (11) sql: --> type.start.query (11) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (11) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (11) sql: --> victoria_ghool (11) sql: SQL-User-Name set to 'victoria_ghool' (11) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (11) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('CEF73F6854ED0E37', '5ffef8deb1d414c7ab9813cb06977e5a', 'victoria_ghool', '', '131.100.39.166', '15', 'Wireless-802.11', FROM_UNIXTIME(1536166940), FROM_UNIXTIME(1536166940), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11g', '', '0', '0', '16-91-82-C6-38-F7:Ryan4-Radius-N', '14-B4-84-40-1F-DC', '', 'Framed-User', '', '') (11) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('CEF73F6854ED0E37', '5ffef8deb1d414c7ab9813cb06977e5a', 'victoria_ghool', '', '131.100.39.166', '15', 'Wireless-802.11', FROM_UNIXTIME(1536166940), FROM_UNIXTIME(1536166940), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11g', '', '0', '0', '16-91-82-C6-38-F7:Ryan4-Radius-N', '14-B4-84-40-1F-DC', '', 'Framed-User', '', '') (11) sql: SQL query returned: success (11) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (11) [sql] = ok (11) [exec] = noop (11) attr_filter.accounting_response: EXPAND %{User-Name} (11) attr_filter.accounting_response: --> victoria_ghool (11) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (11) [attr_filter.accounting_response] = updated (11) } # accounting = updated (11) Sent Accounting-Response Id 72 from 198.58.110.29:1813 to 131.100.39.166:64857 length 0 (11) Finished request (11) Cleaning up request packet ID 72 with timestamp +13 Waking up in 2.1 seconds. (0) Cleaning up request packet ID 61 with timestamp +10 Waking up in 1.7 seconds. (1) Cleaning up request packet ID 62 with timestamp +12 (2) Cleaning up request packet ID 63 with timestamp +12 Waking up in 0.1 seconds. (3) Cleaning up request packet ID 64 with timestamp +12 Waking up in 0.1 seconds. (4) Cleaning up request packet ID 65 with timestamp +12 Waking up in 0.1 seconds. (5) Cleaning up request packet ID 66 with timestamp +13 (6) Cleaning up request packet ID 67 with timestamp +13 (7) Cleaning up request packet ID 68 with timestamp +13 (8) Cleaning up request packet ID 69 with timestamp +13 (9) Cleaning up request packet ID 70 with timestamp +13 (10) Cleaning up request packet ID 71 with timestamp +13 Ready to process requests (12) Received Access-Request Id 143 from 190.213.227.180:50909 to 198.58.110.29:1812 length 208 (12) User-Name = "khadija_dyer" (12) NAS-Identifier = "ryan5" (12) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (12) NAS-Port-Type = Wireless-802.11 (12) NAS-Port = 10 (12) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (12) Connect-Info = "CONNECT 54Mbps 802.11g" (12) Acct-Session-Id = "5B801D36-00000A57" (12) WLAN-Pairwise-Cipher = 1027076 (12) WLAN-Group-Cipher = 1027076 (12) WLAN-AKM-Suite = 1027073 (12) Framed-MTU = 1400 (12) EAP-Message = 0x020e0011016b686164696a615f64796572 (12) Message-Authenticator = 0x7f46c02a9fad1440fed4e171b00f99b3 (12) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 14 length 17 (12) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (12) authenticate { (12) eap: Peer sent packet with method EAP Identity (1) (12) eap: Calling submodule eap_md5 to process data (12) eap_md5: Issuing MD5 Challenge (12) eap: Sending EAP Request (code 1) ID 15 length 22 (12) eap: EAP session adding &reply:State = 0xc25708d1c2580c43 (12) [eap] = handled (12) } # authenticate = handled (12) Using Post-Auth-Type Challenge (12) Post-Auth-Type sub-section not found. Ignoring. (12) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (12) Sent Access-Challenge Id 143 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (12) EAP-Message = 0x010f001604102f7a86066ae4b6898f6ea80dc5614f73 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) State = 0xc25708d1c2580c4397c377255ce49eba (12) Finished request Waking up in 4.9 seconds. (13) Received Access-Request Id 144 from 190.213.227.180:50909 to 198.58.110.29:1812 length 215 (13) User-Name = "khadija_dyer" (13) NAS-Identifier = "ryan5" (13) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (13) NAS-Port-Type = Wireless-802.11 (13) NAS-Port = 10 (13) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (13) Connect-Info = "CONNECT 54Mbps 802.11g" (13) Acct-Session-Id = "5B801D36-00000A57" (13) WLAN-Pairwise-Cipher = 1027076 (13) WLAN-Group-Cipher = 1027076 (13) WLAN-AKM-Suite = 1027073 (13) Framed-MTU = 1400 (13) EAP-Message = 0x020f00060319 (13) State = 0xc25708d1c2580c4397c377255ce49eba (13) Message-Authenticator = 0x10748d6855404cef3ab315c6cceb925f (13) session-state: No cached attributes (13) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) eap: Peer sent EAP Response (code 2) ID 15 length 6 (13) eap: No EAP Start, assuming it's an on-going EAP conversation (13) [eap] = updated (13) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (13) sql: --> khadija_dyer (13) sql: SQL-User-Name set to 'khadija_dyer' rlm_sql (sql): Reserved connection (6) (13) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (13) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'khadija_dyer' ORDER BY id (13) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'khadija_dyer' ORDER BY id (13) sql: User found in radcheck table (13) sql: Conditional check items matched, merging assignment check items (13) sql: Cleartext-Password := "sanghai123" (13) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (13) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'khadija_dyer' ORDER BY id (13) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'khadija_dyer' ORDER BY id (13) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (13) sql: --> SELECT groupname FROM radusergroup WHERE username = 'khadija_dyer' ORDER BY priority (13) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'khadija_dyer' ORDER BY priority (13) sql: User found in the group table (13) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (13) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (13) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id (13) sql: Group "dialup": Conditional check items matched (13) sql: Group "dialup": Merging assignment check items (13) sql: Simultaneous-Use := 200 (13) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (13) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (13) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id (13) sql: Group "dialup": Merging reply items rlm_sql (sql): Released connection (6) rlm_sql (sql): Need 1 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (9), 1 of 23 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (13) [sql] = ok (13) [expiration] = noop (13) [logintime] = noop (13) pap: WARNING: Auth-Type already set. Not setting to PAP (13) [pap] = noop (13) } # authorize = updated (13) Found Auth-Type = eap (13) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xc25708d1c2580c43 (13) eap: Finished EAP session with state 0xc25708d1c2580c43 (13) eap: Previous EAP request found for state 0xc25708d1c2580c43, released from the list (13) eap: Peer sent packet with method EAP NAK (3) (13) eap: Found mutually acceptable type PEAP (25) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: Initiating new EAP-TLS session (13) eap_peap: [eaptls start] = request (13) eap: Sending EAP Request (code 1) ID 16 length 6 (13) eap: EAP session adding &reply:State = 0xc25708d1c3471143 (13) [eap] = handled (13) } # authenticate = handled (13) Using Post-Auth-Type Challenge (13) Post-Auth-Type sub-section not found. Ignoring. (13) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (13) Sent Access-Challenge Id 144 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (13) EAP-Message = 0x011000061920 (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0xc25708d1c347114397c377255ce49eba (13) Finished request Waking up in 4.8 seconds. (14) Received Access-Request Id 145 from 190.213.227.180:50909 to 198.58.110.29:1812 length 331 (14) User-Name = "khadija_dyer" (14) NAS-Identifier = "ryan5" (14) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (14) NAS-Port-Type = Wireless-802.11 (14) NAS-Port = 10 (14) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (14) Connect-Info = "CONNECT 54Mbps 802.11g" (14) Acct-Session-Id = "5B801D36-00000A57" (14) WLAN-Pairwise-Cipher = 1027076 (14) WLAN-Group-Cipher = 1027076 (14) WLAN-AKM-Suite = 1027073 (14) Framed-MTU = 1400 (14) EAP-Message = 0x0210007a198000000070160301006b0100006703015b900c1fa1294d2f712a57cc2e7c771d13af866892ac510bf7fcd4bbf3ef1a66000018c014c0130035002fc00ac00900380032000a00130005000401000026000500050100000000000a0006000400170018000b000201000023000000170000ff01 (14) State = 0xc25708d1c347114397c377255ce49eba (14) Message-Authenticator = 0x6345a7d3214c2a6e05da5b343c8dc40d (14) session-state: No cached attributes (14) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) eap: Peer sent EAP Response (code 2) ID 16 length 122 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0xc25708d1c3471143 (14) eap: Finished EAP session with state 0xc25708d1c3471143 (14) eap: Previous EAP request found for state 0xc25708d1c3471143, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer indicated complete TLS record size will be 112 bytes (14) eap_peap: Got complete TLS record (112 bytes) (14) eap_peap: [eaptls verify] = length included (14) eap_peap: (other): before SSL initialization (14) eap_peap: TLS_accept: before SSL initialization (14) eap_peap: TLS_accept: before SSL initialization (14) eap_peap: <<< recv TLS 1.2 [length 006b] (14) eap_peap: TLS_accept: SSLv3/TLS read client hello (14) eap_peap: >>> send TLS 1.0 Handshake [length 003d], ServerHello (14) eap_peap: TLS_accept: SSLv3/TLS write server hello (14) eap_peap: >>> send TLS 1.0 Handshake [length 02fd], Certificate (14) eap_peap: TLS_accept: SSLv3/TLS write certificate (14) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (14) eap_peap: TLS_accept: SSLv3/TLS write key exchange (14) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (14) eap_peap: TLS_accept: SSLv3/TLS write server done (14) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (14) eap_peap: In SSL Handshake Phase (14) eap_peap: In SSL Accept mode (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 17 length 1004 (14) eap: EAP session adding &reply:State = 0xc25708d1c0461143 (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) Post-Auth-Type sub-section not found. Ignoring. (14) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (14) Sent Access-Challenge Id 145 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (14) EAP-Message = 0x011103ec19c00000049d160301003d020000390301b74dc1446b0af5692d41ad96c114341fcd709cbf06a29ef3a8c206920a7f740700c014000011ff01000100000b0004030001020017000016030102fd0b0002f90002f60002f3308202ef308201d7a00302010202090093b40acbed3d0944300d0609 (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0xc25708d1c046114397c377255ce49eba (14) Finished request Waking up in 4.7 seconds. (15) Received Access-Request Id 146 from 190.213.227.180:50909 to 198.58.110.29:1812 length 215 (15) User-Name = "khadija_dyer" (15) NAS-Identifier = "ryan5" (15) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (15) NAS-Port-Type = Wireless-802.11 (15) NAS-Port = 10 (15) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (15) Connect-Info = "CONNECT 54Mbps 802.11g" (15) Acct-Session-Id = "5B801D36-00000A57" (15) WLAN-Pairwise-Cipher = 1027076 (15) WLAN-Group-Cipher = 1027076 (15) WLAN-AKM-Suite = 1027073 (15) Framed-MTU = 1400 (15) EAP-Message = 0x021100061900 (15) State = 0xc25708d1c046114397c377255ce49eba (15) Message-Authenticator = 0xd619840612e85bfb1a6b23f1a34af544 (15) session-state: No cached attributes (15) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) [digest] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) eap: Peer sent EAP Response (code 2) ID 17 length 6 (15) eap: Continuing tunnel setup (15) [eap] = ok (15) } # authorize = ok (15) Found Auth-Type = eap (15) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (15) authenticate { (15) eap: Expiring EAP session with state 0xc25708d1c0461143 (15) eap: Finished EAP session with state 0xc25708d1c0461143 (15) eap: Previous EAP request found for state 0xc25708d1c0461143, released from the list (15) eap: Peer sent packet with method EAP PEAP (25) (15) eap: Calling submodule eap_peap to process data (15) eap_peap: Continuing EAP-TLS (15) eap_peap: Peer ACKed our handshake fragment (15) eap_peap: [eaptls verify] = request (15) eap_peap: [eaptls process] = handled (15) eap: Sending EAP Request (code 1) ID 18 length 193 (15) eap: EAP session adding &reply:State = 0xc25708d1c1451143 (15) [eap] = handled (15) } # authenticate = handled (15) Using Post-Auth-Type Challenge (15) Post-Auth-Type sub-section not found. Ignoring. (15) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (15) Sent Access-Challenge Id 146 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (15) EAP-Message = 0x011200c11900c1994f5cf271aa2daa12e9f2817c2c2f654485d266fe39fa9eaaa39605b31ca371978fcebd6f8690e2fcd9d4ba51c3df3d3c67288940cd0fe34be8d8acdcbedd30a88e28ab4bf2c5b5b9a46cbba4e9f2aee5df7c3c3c7788910763ebb401a578499b6b533cb0bdd1ebf6bf4de421ae8fa4 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0xc25708d1c145114397c377255ce49eba (15) Finished request Waking up in 4.6 seconds. (16) Received Access-Request Id 147 from 190.213.227.180:50909 to 198.58.110.29:1812 length 353 (16) User-Name = "khadija_dyer" (16) NAS-Identifier = "ryan5" (16) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (16) NAS-Port-Type = Wireless-802.11 (16) NAS-Port = 10 (16) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (16) Connect-Info = "CONNECT 54Mbps 802.11g" (16) Acct-Session-Id = "5B801D36-00000A57" (16) WLAN-Pairwise-Cipher = 1027076 (16) WLAN-Group-Cipher = 1027076 (16) WLAN-AKM-Suite = 1027073 (16) Framed-MTU = 1400 (16) EAP-Message = 0x021200901980000000861603010046100000424104d3e55df7748455aa1f59972ddb1fc5ddafcf3a41412304355ae5b5bfefe491e65ad85a1282b37a160dadd3b6f62b14efe1ebf34c915096419b3a90af0c666ad5140301000101160301003094669adbca6f44c0295518dcc685f9bfe76a147a0b8f13 (16) State = 0xc25708d1c145114397c377255ce49eba (16) Message-Authenticator = 0xb04d47d1d89fc4257e5caf60a87b2ae8 (16) session-state: No cached attributes (16) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /(a)\./) { (16) if (&User-Name =~ /(a)\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) [mschap] = noop (16) [digest] = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) eap: Peer sent EAP Response (code 2) ID 18 length 144 (16) eap: Continuing tunnel setup (16) [eap] = ok (16) } # authorize = ok (16) Found Auth-Type = eap (16) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (16) authenticate { (16) eap: Expiring EAP session with state 0xc25708d1c1451143 (16) eap: Finished EAP session with state 0xc25708d1c1451143 (16) eap: Previous EAP request found for state 0xc25708d1c1451143, released from the list (16) eap: Peer sent packet with method EAP PEAP (25) (16) eap: Calling submodule eap_peap to process data (16) eap_peap: Continuing EAP-TLS (16) eap_peap: Peer indicated complete TLS record size will be 134 bytes (16) eap_peap: Got complete TLS record (134 bytes) (16) eap_peap: [eaptls verify] = length included (16) eap_peap: TLS_accept: SSLv3/TLS write server done (16) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (16) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (16) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (16) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (16) eap_peap: TLS_accept: SSLv3/TLS read finished (16) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (16) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (16) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (16) eap_peap: TLS_accept: SSLv3/TLS write finished (16) eap_peap: (other): SSL negotiation finished successfully (16) eap_peap: SSL Connection Established (16) eap_peap: [eaptls process] = handled (16) eap: Sending EAP Request (code 1) ID 19 length 65 (16) eap: EAP session adding &reply:State = 0xc25708d1c6441143 (16) [eap] = handled (16) } # authenticate = handled (16) Using Post-Auth-Type Challenge (16) Post-Auth-Type sub-section not found. Ignoring. (16) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (16) Sent Access-Challenge Id 147 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (16) EAP-Message = 0x01130041190014030100010116030100309dcf0d560833f4bfae995b203594eaeeb6aada1a90414974a6caff215c1f9933a228a6f2488d66f01f411b1695224e82 (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0xc25708d1c644114397c377255ce49eba (16) Finished request Waking up in 4.4 seconds. (17) Received Access-Request Id 148 from 190.213.227.180:50909 to 198.58.110.29:1812 length 215 (17) User-Name = "khadija_dyer" (17) NAS-Identifier = "ryan5" (17) Called-Station-Id = "10-6F-3F-0C-14-96:ryan5-radius" (17) NAS-Port-Type = Wireless-802.11 (17) NAS-Port = 10 (17) Calling-Station-Id = "D8-5D-E2-E3-A5-D9" (17) Connect-Info = "CONNECT 54Mbps 802.11g" (17) Acct-Session-Id = "5B801D36-00000A57" (17) WLAN-Pairwise-Cipher = 1027076 (17) WLAN-Group-Cipher = 1027076 (17) WLAN-AKM-Suite = 1027073 (17) Framed-MTU = 1400 (17) EAP-Message = 0x021300061900 (17) State = 0xc25708d1c644114397c377255ce49eba (17) Message-Authenticator = 0x3e2a0e69af369d7b59528aba2cee0ce3 (17) session-state: No cached attributes (17) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) [mschap] = noop (17) [digest] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "khadija_dyer", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) eap: Peer sent EAP Response (code 2) ID 19 length 6 (17) eap: Continuing tunnel setup (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (17) authenticate { (17) eap: Expiring EAP session with state 0xc25708d1c6441143 (17) eap: Finished EAP session with state 0xc25708d1c6441143 (17) eap: Previous EAP request found for state 0xc25708d1c6441143, released from the list (17) eap: Peer sent packet with method EAP PEAP (25) (17) eap: Calling submodule eap_peap to process data (17) eap_peap: Continuing EAP-TLS (17) eap_peap: Peer ACKed our handshake fragment. handshake is finished (17) eap_peap: [eaptls verify] = success (17) eap_peap: [eaptls process] = success (17) eap_peap: Session established. Decoding tunneled attributes (17) eap_peap: PEAP state TUNNEL ESTABLISHED (17) eap: Sending EAP Request (code 1) ID 20 length 43 (17) eap: EAP session adding &reply:State = 0xc25708d1c7431143 (17) [eap] = handled (17) } # authenticate = handled (17) Using Post-Auth-Type Challenge (17) Post-Auth-Type sub-section not found. Ignoring. (17) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (17) Sent Access-Challenge Id 148 from 198.58.110.29:1812 to 190.213.227.180:50909 length 0 (17) EAP-Message = 0x0114002b190017030100200e7023f8fee87ad2a50b75d94e03a5bdfa63221cc7a8e5f664d51da66a376caa (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xc25708d1c743114397c377255ce49eba (17) Finished request Waking up in 4.3 seconds. ####################################################################################################################################### Ill post the contents of the configuration files ####################################################################################################################################### # -*- text -*- ## ## clients.conf -- client configuration directives ## ## $Id: 76b300d3c55f1c5c052289b76bf28ac3a370bbb2 $ client localhost { proto = * secret = whatever require_message_authenticator = no # nas_type = cisco # localhost isn't usually a NAS... idle_timeout = 30 } } # IPv6 Client client localhost_ipv6 { ipv6addr = ::1 secret = testing123 } ####################################################################################################################################### # -*- text -*- ## ## sql.conf -- SQL modules ## ## $Id: 4a59483c35c77f573fb177919e19ba4434cc3da1 $ ###################################################################### # # Configuration for the SQL module # # The database schemas and queries are located in subdirectories: # # sql/<DB>/main/schema.sql Schema # sql/<DB>/main/queries.conf Authorisation and Accounting queries # # Where "DB" is mysql, mssql, oracle, or postgresql. # # sql { # The sub-module to use to execute queries. This should match # the database you're attempting to connect to. # # * rlm_sql_mysql # * rlm_sql_mssql # * rlm_sql_oracle # * rlm_sql_postgresql # * rlm_sql_sqlite # * rlm_sql_null (log queries to disk) # driver = "rlm_sql_mysql" dialect = "mysql" # Connection info: # server = "localhost" port = 3306 login = "root" password = "**********" # Database table configuration for everything except Oracle radius_db = "radius" # If you are using Oracle then use this instead # radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))" # If you're using postgresql this can also be used instead of the connection info parameters # radius_db = "dbname=radius host=localhost user=radius password=raddpass" # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to # use SSL connections then use this form of connection info parameter # radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt" # If you want both stop and start records logged to the # same SQL table, leave this as is. If you want them in # different tables, put the start table in acct_table1 # and stop table in acct_table2 acct_table1 = "radacct" acct_table2 = "radacct" acct_table3 = "radacctold" # Allow for storing data after authentication postauth_table = "radpostauth" # Tables containing 'check' items authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" # Tables containing 'reply' items authreply_table = "radreply" groupreply_table = "radgroupreply" # Table to keep group info usergroup_table = "radusergroup" # If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table. # If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table. read_groups = yes # If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table. # If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table. read_profiles = yes # Remove stale session if checkrad does not see a double login delete_stale_sessions = yes # Write SQL queries to a logfile. This is potentially useful for tracing # issues with authorization queries. See also "logfile" directives in # mods-config/sql/main/*/queries.conf. You can enable per-section logging # by enabling "logfile" there, or global logging by enabling "logfile" here. # # Per-section logging can be disabled by setting "logfile = ''" # logfile = ${logdir}/sqllog.sql # Set the maximum query duration and connection timeout # for rlm_sql_mysql. # query_timeout = 5 # As of version 3.0, the "pool" section has replaced the # following configuration items: # # num_sql_socks # connect_failure_retry_delay # lifetime # max_queries # # The connection pool is new for 3.0, and will be used in many # modules, for all kinds of connection-related activity. # # When the server is not threaded, the connection pool # limits are ignored, and only one connection is used. # # If you want to have multiple SQL modules re-use the same # connection pool, use "pool = name" instead of a "pool" # section. e.g. # # sql1 { # ... # pool { # ... # } # } # # # sql2 will use the connection pool from sql1 # sql2 { # ... # pool = sql1 # } # pool { # Connections to create during module instantiation. # If the server cannot create specified number of # connections during instantiation it will exit. # Set to 0 to allow the server to start without the # database being available. start = ${thread[pool].start_servers} # Minimum number of connections to keep open min = ${thread[pool].min_spare_servers} # Maximum number of connections # # If these connections are all in use and a new one # is requested, the request will NOT get a connection. # # Setting 'max' to LESS than the number of threads means # that some threads may starve, and you will see errors # like 'No connections available and at max connection limit' # # Setting 'max' to MORE than the number of threads means # that there are more connections than necessary. max = ${thread[pool].max_servers} # Spare connections to be left idle # # NOTE: Idle connections WILL be closed if "idle_timeout" # is set. This should be less than or equal to "max" above. spare = ${thread[pool].max_spare_servers} # Number of uses before the connection is closed # # 0 means "infinite" uses = 0 # The number of seconds to wait after the server tries # to open a connection, and fails. During this time, # no new connections will be opened. retry_delay = 30 # The lifetime (in seconds) of the connection lifetime = 0 # idle timeout (in seconds). A connection which is # unused for this length of time will be closed. idle_timeout = 60 # NOTE: All configuration settings are enforced. If a # connection is closed because of "idle_timeout", # "uses", or "lifetime", then the total number of # connections MAY fall below "min". When that # happens, it will open a new connection. It will # also log a WARNING message. # # The solution is to either lower the "min" connections, # or increase lifetime/idle_timeout. } # Set to 'yes' to read radius clients from the database ('nas' table) # Clients will ONLY be read on server startup. read_clients = yes # Table to keep radius client info client_table = "nas" # # The group attribute specific to this instance of rlm_sql # # This entry should be used for additional instances (sql foo {}) # of the SQL module. # group_attribute = "${.:instance}-SQL-Group" # This entry should be used for the default instance (sql {}) # of the SQL module. group_attribute = "SQL-Group" # Read database-specific queries $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf ####################################################################################################################################### # -*- text -*- # # main/mysql/queries.conf-- MySQL configuration for default schema (schema.sql) # # $Id: 40508024d5fd6a319bbb85775c3fe1e8388be656 $ # Safe characters list for sql queries. Everything else is replaced # with their mime-encoded equivalents. # The default list should be ok #safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" ####################################################################### # Connection config ####################################################################### # The character set is not configurable. The default character set of # the mysql client library is used. To control the character set, # create/edit my.cnf (typically in /etc/mysql/my.cnf or /etc/my.cnf) # and enter # [client] # default-character-set = utf8 # ####################################################################### # Query config: Username ####################################################################### # This is the username that will get substituted, escaped, and added # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below # everywhere a username substitution is needed so you you can be sure # the username passed from the client is escaped properly. # # Uncomment the next line, if you want the sql_user_name to mean: # # Use Stripped-User-Name, if it's there. # Else use User-Name, if it's there, # Else use hard-coded string "DEFAULT" as the user name. sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}" # #sql_user_name = "%{User-Name}" ####################################################################### # Default profile ####################################################################### # This is the default profile. It is found in SQL by group membership. # That means that this profile must be a member of at least one group # which will contain the corresponding check and reply items. # This profile will be queried in the authorize section for every user. # The point is to assign all users a default profile without having to # manually add each one to a group that will contain the profile. # The SQL module will also honor the User-Profile attribute. This # attribute can be set anywhere in the authorize section (ie the users # file). It is found exactly as the default profile is found. # If it is set then it will *overwrite* the default profile setting. # The idea is to select profiles based on checks on the incoming packets, # not on user group membership. For example: # -- users file -- # DEFAULT Service-Type == Outbound-User, User-Profile := "outbound" # DEFAULT Service-Type == Framed-User, User-Profile := "framed" # # By default the default_user_profile is not set # #default_user_profile = "DEFAULT" ####################################################################### # NAS Query ####################################################################### # This query retrieves the radius clients # # 0. Row ID (currently unused) # 1. Name (or IP address) # 2. Shortname # 3. Type # 4. Secret # 5. Server ####################################################################### client_query = "\ SELECT id, nasname, shortname, type, secret, server \ FROM ${client_table}" ####################################################################### # Authorization Queries ####################################################################### # These queries compare the check items for the user # in ${authcheck_table} and setup the reply items in # ${authreply_table}. You can use any query/tables # you want, but the return data for each row MUST # be in the following order: # # 0. Row ID (currently unused) # 1. UserName/GroupName # 2. Item Attr Name # 3. Item Attr Value # 4. Item Attr Operation ####################################################################### # Use these for case sensitive usernames. #authorize_check_query = "\ # SELECT id, username, attribute, value, op \ # FROM ${authcheck_table} \ # WHERE username = BINARY '%{SQL-User-Name}' \ # ORDER BY id" #authorize_reply_query = "\ # SELECT id, username, attribute, value, op \ # FROM ${authreply_table} \ # WHERE username = BINARY '%{SQL-User-Name}' \ # ORDER BY id" # # The default queries are case insensitive. (for compatibility with # older versions of FreeRADIUS) # authorize_check_query = "\ SELECT id, username, attribute, value, op \ FROM ${authcheck_table} \ WHERE username = '%{SQL-User-Name}' \ ORDER BY id" authorize_reply_query = "\ SELECT id, username, attribute, value, op \ FROM ${authreply_table} \ WHERE username = '%{SQL-User-Name}' \ ORDER BY id" # # Use these for case sensitive usernames. # #group_membership_query = "\ # SELECT groupname \ # FROM ${usergroup_table} \ # WHERE username = BINARY '%{SQL-User-Name}' \ # ORDER BY priority" group_membership_query = "\ SELECT groupname \ FROM ${usergroup_table} \ WHERE username = '%{SQL-User-Name}' \ ORDER BY priority" authorize_group_check_query = "\ SELECT id, groupname, attribute, \ Value, op \ FROM ${groupcheck_table} \ WHERE groupname = '%{${group_attribute}}' \ ORDER BY id" authorize_group_reply_query = "\ SELECT id, groupname, attribute, \ value, op \ FROM ${groupreply_table} \ WHERE groupname = '%{${group_attribute}}' \ ORDER BY id" ####################################################################### # Simultaneous Use Checking Queries ####################################################################### # simul_count_query - query for the number of current connections # - If this is not defined, no simultaneous use checking # - will be performed by this module instance # simul_verify_query - query to return details of current connections # for verification # - Leave blank or commented out to disable verification step # - Note that the returned field order should not be changed. ####################################################################### simul_count_query = "\ SELECT COUNT(*) \ FROM ${acct_table1} \ WHERE username = '%{SQL-User-Name}' \ AND acctstoptime IS NULL " simul_verify_query = "\ SELECT \ radacctid, acctsessionid, username, nasipaddress, nasportid, #framedipaddress, \ callingstationid, framedprotocol \ FROM ${acct_table1} \ WHERE username = '%{SQL-User-Name}' \ AND acctstoptime IS NULL" ####################################################################### # Accounting and Post-Auth Queries ####################################################################### # These queries insert/update accounting and authentication records. # The query to use is determined by the value of 'reference'. # This value is used as a configuration path and should resolve to one # or more 'query's. If reference points to multiple queries, and a query # fails, the next query is executed. # # Behaviour is identical to the old 1.x/2.x module, except we can now # fail between N queries, and query selection can be based on any # combination of attributes, or custom 'Acct-Status-Type' values. ####################################################################### accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" # Write SQL queries to a logfile. This is potentially useful for bulk inserts # when used with the rlm_sql_null driver. # logfile = ${logdir}/accounting.sql column_list = "\ acctsessionid, acctuniqueid, username, \ realm, nasipaddress, nasportid, \ nasporttype, acctstarttime, acctupdatetime, \ acctstoptime, acctsessiontime, acctauthentic, \ connectinfo_start, connectinfo_stop, acctinputoctets, \ acctoutputoctets, calledstationid, callingstationid, \ acctterminatecause, servicetype, framedprotocol, \ framedipaddress" type { accounting-on { # # Bulk terminate all sessions associated with a given NAS # query = "\ UPDATE ${....acct_table1} \ SET \ acctstoptime = FROM_UNIXTIME(\ %{integer:Event-Timestamp}), \ acctsessiontime = '%{integer:Event-Timestamp}' \ - UNIX_TIMESTAMP(acctstarttime), \ acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' \ WHERE acctstoptime IS NULL \ AND nasipaddress = '%{NAS-IP-Address}' \ AND acctstarttime <= FROM_UNIXTIME(\ %{integer:Event-Timestamp})" } accounting-off { query = "${..accounting-on.query}" } start { # # Insert a new record into the sessions table # query = "\ INSERT INTO ${....acct_table1} \ (${...column_list}) \ VALUES \ ('%{Acct-Session-Id}', \ '%{Acct-Unique-Session-Id}', \ '%{SQL-User-Name}', \ '%{Realm}', \ '%{NAS-IP-Address}', \ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \ '%{NAS-Port-Type}', \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ NULL, \ '0', \ '%{Acct-Authentic}', \ '%{Connect-Info}', \ '', \ '0', \ '0', \ '%{Called-Station-Id}', \ '%{Calling-Station-Id}', \ '', \ '%{Service-Type}', \ '%{Framed-Protocol}', \ '%{Framed-IP-Address}')" # # Key constraints prevented us from inserting a new session, # use the alternate query to update an existing session. # query = "\ UPDATE ${....acct_table1} SET \ acctstarttime = FROM_UNIXTIME(%{integer:Event-Timestamp}), \ acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), \ connectinfo_start = '%{Connect-Info}' \ WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" query = "\ UPDATE ${....acct_table1} SET \ acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), \ acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' \ WHERE acctstoptime IS NULL \ AND callingstationid = '%{Calling-Station-Id}'\ AND acctstarttime IS NOT FROM_UNIXTIME(%{integer:Event-Timestamp})" } interim-update { # # Update an existing session and calculate the interval # between the last data we received for the session and this # update. This can be used to find stale sessions. # query = "\ UPDATE ${....acct_table1} SET \ acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), \ acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' \ WHERE acctstoptime IS NULL \ AND callingstationid = '%{Calling-Station-Id}'\ AND acctstarttime IS NOT FROM_UNIXTIME(%{integer:Event-Timestamp})" query = "\ UPDATE ${....acct_table1} \ SET \ acctupdatetime = (@acctupdatetime_old:=acctupdatetime), \ acctupdatetime = FROM_UNIXTIME(\ %{integer:Event-Timestamp}), \ acctinterval = %{integer:Event-Timestamp} - \ UNIX_TIMESTAMP(@acctupdatetime_old), \ framedipaddress = '%{Framed-IP-Address}', \ acctsessiontime = %{%{Acct-Session-Time}:-NULL}, \ acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' \ << 32 | '%{%{Acct-Input-Octets}:-0}', \ acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' \ << 32 | '%{%{Acct-Output-Octets}:-0}' \ WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" # # The update condition matched no existing sessions. Use # the values provided in the update to create a new session. # query = "\ INSERT INTO ${....acct_table1} \ (${...column_list}) \ VALUES \ ('%{Acct-Session-Id}', \ '%{Acct-Unique-Session-Id}', \ '%{SQL-User-Name}', \ '%{Realm}', \ '%{NAS-IP-Address}', \ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \ '%{NAS-Port-Type}', \ FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ NULL, \ %{%{Acct-Session-Time}:-NULL}, \ '%{Acct-Authentic}', \ '%{Connect-Info}', \ '', \ '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \ '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \ '%{Called-Station-Id}', \ '%{Calling-Station-Id}', \ '', \ '%{Service-Type}', \ '%{Framed-Protocol}', \ '%{Framed-IP-Address}')" } stop { # # Session has terminated, update the stop time and statistics. # ########################################## delete taolle query = "\ INSERT INTO ${....acct_table3} \ SELECT * FROM ${....acct_table1} \ WHERE acctstoptime <> 'NULL'" query = "\ DELETE FROM ${....acct_table1} \ WHERE acctstoptime IS NOT NULL" query = "\ UPDATE ${....acct_table2} SET \ acctstoptime = FROM_UNIXTIME(\ %{integer:Event-Timestamp}), \ acctsessiontime = %{%{Acct-Session-Time}:-NULL}, \ acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' \ << 32 | '%{%{Acct-Input-Octets}:-0}', \ acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' \ << 32 | '%{%{Acct-Output-Octets}:-0}', \ acctterminatecause = '%{Acct-Terminate-Cause}', \ connectinfo_stop = '%{Connect-Info}' \ WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" # # The update condition matched no existing sessions. Use # the values provided in the update to create a new session. # query = "\ INSERT INTO ${....acct_table2} \ (${...column_list}) \ VALUES \ ('%{Acct-Session-Id}', \ '%{Acct-Unique-Session-Id}', \ '%{SQL-User-Name}', \ '%{Realm}', \ '%{NAS-IP-Address}', \ '%{%{NAS-Port-ID}:-%{NAS-Port}}', \ '%{NAS-Port-Type}', \ FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ FROM_UNIXTIME(%{integer:Event-Timestamp}), \ %{%{Acct-Session-Time}:-NULL}, \ '%{Acct-Authentic}', \ '', \ '%{Connect-Info}', \ '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \ '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \ '%{Called-Station-Id}', \ '%{Calling-Station-Id}', \ '%{Acct-Terminate-Cause}', \ '%{Service-Type}', \ '%{Framed-Protocol}', \ '%{Framed-IP-Address}')" } } } ####################################################################### # Authentication Logging Queries ####################################################################### # postauth_query - Insert some info after authentication ####################################################################### post-auth { # Write SQL queries to a logfile. This is potentially useful for bulk inserts # when used with the rlm_sql_null driver. # logfile = ${logdir}/post-auth.sql query = "\ INSERT INTO ${..postauth_table} \ (username, pass, reply, authdate) \ VALUES ( \ '%{SQL-User-Name}', \ '%{%{User-Password}:-%{Chap-Password}}', \ '%{reply:Packet-Type}', \ '%S')" } #################################################################################################################################### ###################################################################### # # As of 2.0.0, FreeRADIUS supports virtual hosts using the # "server" section, and configuration directives. # # Virtual hosts should be put into the "sites-available" # directory. Soft links should be created in the "sites-enabled" # directory to these files. This is done in a normal installation. # # If you are using 802.1X (EAP) authentication, please see also # the "inner-tunnel" virtual server. You will likely have to edit # that, too, for authentication to work. # # $Id: 083407596aa5074d665adac9606e7de655b634aa $ # ###################################################################### # # Read "man radiusd" before editing this file. See the section # titled DEBUGGING. It outlines a method where you can quickly # obtain the configuration you want, without running into # trouble. See also "man unlang", which documents the format # of this file. # # This configuration is designed to work in the widest possible # set of circumstances, with the widest possible number of # authentication methods. This means that in general, you should # need to make very few changes to this file. # # The best way to configure the server for your local system # is to CAREFULLY edit this file. Most attempts to make large # edits to this file will BREAK THE SERVER. Any edits should # be small, and tested by running the server with "radiusd -X". # Once the edits have been verified to work, save a copy of these # configuration files somewhere. (e.g. as a "tar" file). Then, # make more edits, and test, as above. # # There are many "commented out" references to modules such # as ldap, sql, etc. These references serve as place-holders. # If you need the functionality of that module, then configure # it in radiusd.conf, and un-comment the references to it in # this file. In most cases, those small changes will result # in the server being able to connect to the DB, and to # authenticate users. # ###################################################################### server default { # # If you want the server to listen on additional addresses, or on # additional ports, you can use multiple "listen" sections. # # Each section make the server listen for only one type of packet, # therefore authentication and accounting have to be configured in # different sections. # # The server ignore all "listen" section if you are using '-i' and '-p' # on the command line. # listen { # Type of packets to listen for. # Allowed values are: # auth listen for authentication packets # acct listen for accounting packets # proxy IP to use for sending proxied packets # detail Read from the detail file. For examples, see # raddb/sites-available/copy-acct-to-home-server # status listen for Status-Server packets. For examples, # see raddb/sites-available/status # coa listen for CoA-Request and Disconnect-Request # packets. For examples, see the file # raddb/sites-available/coa # type = auth # Note: "type = proxy" lets you control the source IP used for # proxying packets, with some limitations: # # * A proxy listener CANNOT be used in a virtual server section. # * You should probably set "port = 0". # * Any "clients" configuration will be ignored. # # See also proxy.conf, and the "src_ipaddr" configuration entry # in the sample "home_server" section. When you specify the # source IP address for packets sent to a home server, the # proxy listeners are automatically created. # ipaddr/ipv4addr/ipv6addr - IP address on which to listen. # Out of several options the first one will be used. # # Allowed values are: # IPv4 address (e.g. 1.2.3.4, for ipv4addr/ipaddr) # IPv6 address (e.g. 2001:db8::1, for ipv6addr/ipaddr) # hostname (radius.example.com, # A record for ipv4addr, # AAAA record for ipv6addr, # A or AAAA record for ipaddr) # wildcard (*) # # ipv4addr = * # ipv6addr = * ipaddr = * # Port on which to listen. # Allowed values are: # integer port number (1812) # 0 means "use /etc/services for the proper port" port = 0 # Some systems support binding to an interface, in addition # to the IP address. This feature isn't strictly necessary, # but for sites with many IP addresses on one interface, # it's useful to say "listen on all addresses for eth0". # # If your system does not support this feature, you will # get an error if you try to use it. # # interface = eth0 # Per-socket lists of clients. This is a very useful feature. # # The name here is a reference to a section elsewhere in # radiusd.conf, or clients.conf. Having the name as # a reference allows multiple sockets to use the same # set of clients. # # If this configuration is used, then the global list of clients # is IGNORED for this "listen" section. Take care configuring # this feature, to ensure you don't accidentally disable a # client you need. # # See clients.conf for the configuration of "per_socket_clients". # # clients = per_socket_clients # # Connection limiting for sockets with "proto = tcp". # # This section is ignored for other kinds of sockets. # limit { # # Limit the number of simultaneous TCP connections to the socket # # The default is 16. # Setting this to 0 means "no limit" max_connections = 16 # The per-socket "max_requests" option does not exist. # # The lifetime, in seconds, of a TCP connection. After # this lifetime, the connection will be closed. # # Setting this to 0 means "forever". lifetime = 0 # # The idle timeout, in seconds, of a TCP connection. # If no packets have been received over the connection for # this time, the connection will be closed. # # Setting this to 0 means "no timeout". # # We STRONGLY RECOMMEND that you set an idle timeout. # idle_timeout = 30 } } # # This second "listen" section is for listening on the accounting # port, too. # listen { ipaddr = * # ipv6addr = :: port = 0 type = acct # interface = eth0 # clients = per_socket_clients limit { # The number of packets received can be rate limited via the # "max_pps" configuration item. When it is set, the server # tracks the total number of packets received in the previous # second. If the count is greater than "max_pps", then the # new packet is silently discarded. This helps the server # deal with overload situations. # # The packets/s counter is tracked in a sliding window. This # means that the pps calculation is done for the second # before the current packet was received. NOT for the current # wall-clock second, and NOT for the previous wall-clock second. # # Useful values are 0 (no limit), or 100 to 10000. # Values lower than 100 will likely cause the server to ignore # normal traffic. Few systems are capable of handling more than # 10K packets/s. # # It is most useful for accounting systems. Set it to 50% # more than the normal accounting load, and you can be sure that # the server will never get overloaded # # max_pps = 0 # Only for "proto = tcp". These are ignored for "udp" sockets. # # idle_timeout = 0 # lifetime = 0 # max_connections = 0 } } # IPv6 versions of the above - read their full config to understand options listen { type = auth ipv6addr = :: # any. ::1 == localhost port = 0 # interface = eth0 # clients = per_socket_clients limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { ipv6addr = :: port = 0 type = acct # interface = eth0 # clients = per_socket_clients limit { # max_pps = 0 # idle_timeout = 0 # lifetime = 0 # max_connections = 0 } } # Authorization. First preprocess (hints and huntgroups files), # then realms, and finally look in the "users" file. # # Any changes made here should also be made to the "inner-tunnel" # virtual server. # # The order of the realm modules will determine the order that # we try to find a matching realm. # # Make *sure* that 'preprocess' comes before any realm if you # need to setup hints for the remote radius server authorize { # # Take a User-Name, and perform some checks on it, for spaces and other # invalid characters. If the User-Name appears invalid, reject the # request. # # See policy.d/filter for the definition of the filter_username policy. # filter_username # # Some broken equipment sends passwords with embedded zeros. # i.e. the debug output will show # # User-Password = "password\000\000" # # This policy will fix it to just be "password". # # filter_password # # The preprocess module takes care of sanitizing some bizarre # attributes in the request, and turning them into attributes # which are more standard. # # It takes care of processing the 'raddb/mods-config/preprocess/hints' # and the 'raddb/mods-config/preprocess/huntgroups' files. preprocess # If you intend to use CUI and you require that the Operator-Name # be set for CUI generation and you want to generate CUI also # for your local clients then uncomment the operator-name # below and set the operator-name for your clients in clients.conf # operator-name # # If you want to generate CUI for some clients that do not # send proper CUI requests, then uncomment the # cui below and set "add_cui = yes" for these clients in clients.conf # cui # # If you want to have a log of authentication requests, # un-comment the following line. # auth_log # # The chap module will set 'Auth-Type := CHAP' if we are # handling a CHAP request and Auth-Type has not already been set chap # # If the users are logging in with an MS-CHAP-Challenge # attribute for authentication, the mschap module will find # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' # to the request, which will cause the server to then use # the mschap module for authentication. mschap # # If you have a Cisco SIP server authenticating against # FreeRADIUS, uncomment the following line, and the 'digest' # line in the 'authenticate' section. digest # # The WiMAX specification says that the Calling-Station-Id # is 6 octets of the MAC. This definition conflicts with # RFC 3580, and all common RADIUS practices. Un-commenting # the "wimax" module here means that it will fix the # Calling-Station-Id attribute to the normal format as # specified in RFC 3580 Section 3.21 # wimax # # Look for IPASS style 'realm/', and if not found, look for # '@realm', and decide whether or not to proxy, based on # that. # IPASS # # If you are using multiple kinds of realms, you probably # want to set "ignore_null = yes" for all of them. # Otherwise, when the first style of realm doesn't match, # the other styles won't be checked. # suffix # ntdomain # # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP # authentication. # # It also sets the EAP-Type attribute in the request # attribute list to the EAP type from the packet. # # The EAP module returns "ok" if it is not yet ready to # authenticate the user. The configuration below checks for # that code, and stops processing the "authorize" section if # so. # # Any LDAP and/or SQL servers will not be queried for the # initial set of packets that go back and forth to set up # TTLS or PEAP. # eap { ok = return } # # Pull crypt'd passwords from /etc/passwd or /etc/shadow, # using the system API's to get the password. If you want # to read /etc/passwd or /etc/shadow directly, see the # mods-available/passwd module. # # unix # # Read the 'users' file. In v3, this is located in # raddb/mods-config/files/authorize #files # # Look in an SQL database. The schema of the database # is meant to mirror the "users" file. # # See "Authorization Queries" in mods-available/sql sql # # If you are using /etc/smbpasswd, and are also doing # mschap authentication, the un-comment this line, and # configure the 'smbpasswd' module. # smbpasswd # # The ldap module reads passwords from the LDAP database. -ldap # # Enforce daily limits on time spent logged in. # daily # expiration logintime # # If no other module has claimed responsibility for # authentication, then try to use PAP. This allows the # other modules listed above to add a "known good" password # to the request, and to do nothing else. The PAP module # will then see that password, and use it to do PAP # authentication. # # This module should be listed last, so that the other modules # get a chance to set Auth-Type for themselves. # pap # # If "status_server = yes", then Status-Server messages are passed # through the following section, and ONLY the following section. # This permits you to do DB queries, for example. If the modules # listed here return "fail", then NO response is sent. # # Autz-Type Status-Server { # # } } # Authentication. # # # This section lists which modules are available for authentication. # Note that it does NOT mean 'try each module in order'. It means # that a module from the 'authorize' section adds a configuration # attribute 'Auth-Type := FOO'. That authentication type is then # used to pick the appropriate module from the list below. # # In general, you SHOULD NOT set the Auth-Type attribute. The server # will figure it out on its own, and will do the right thing. The # most common side effect of erroneously setting the Auth-Type # attribute is that one authentication method will work, but the # others will not. # # The common reasons to set the Auth-Type attribute by hand # is to either forcibly reject the user (Auth-Type := Reject), # or to or forcibly accept the user (Auth-Type := Accept). # # Note that Auth-Type := Accept will NOT work with EAP. # # Please do not put "unlang" configurations into the "authenticate" # section. Put them in the "post-auth" section instead. That's what # the post-auth section is for. # authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # # Most people want CHAP authentication # A back-end database listed in the 'authorize' section # MUST supply a CLEAR TEXT password. Encrypted passwords # won't work. Auth-Type CHAP { chap } # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # For old names, too. # mschap # # If you have a Cisco SIP server authenticating against # FreeRADIUS, uncomment the following line, and the 'digest' # line in the 'authorize' section. digest # # Pluggable Authentication Modules. # pam # Uncomment it if you want to use ldap for authentication # # Note that this means "check plain-text password against # the ldap database", which means that EAP won't work, # as it does not supply a plain-text password. # # We do NOT recommend using this. LDAP servers are databases. # They are NOT authentication servers. FreeRADIUS is an # authentication server, and knows what to do with authentication. # LDAP servers do not. # # Auth-Type LDAP { # ldap # } # # Allow EAP authentication. eap # # The older configurations sent a number of attributes in # Access-Challenge packets, which wasn't strictly correct. # If you want to filter out these attributes, uncomment # the following lines. # # Auth-Type eap { # eap { # handled = 1 # } # if (handled && (Response-Packet-Type == Access-Challenge)) { # attr_filter.access_challenge.post-auth # handled # override the "updated" code from attr_filter # } # } } # # Pre-accounting. Decide which accounting type to use. # preacct { preprocess # # Merge Acct-[Input|Output]-Gigawords and Acct-[Input-Output]-Octets # into a single 64bit counter Acct-[Input|Output]-Octets64. # # acct_counters64 # # Session start times are *implied* in RADIUS. # The NAS never sends a "start time". Instead, it sends # a start packet, *possibly* with an Acct-Delay-Time. # The server is supposed to conclude that the start time # was "Acct-Delay-Time" seconds in the past. # # The code below creates an explicit start time, which can # then be used in other modules. It will be *mostly* correct. # Any errors are due to the 1-second resolution of RADIUS, # and the possibility that the time on the NAS may be off. # # The start time is: NOW - delay - session_length # # update request { # FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}" # } # # Ensure that we have a semi-unique identifier for every # request, and many NAS boxes are broken. acct_unique # # Look for IPASS-style 'realm/', and if not found, look for # '@realm', and decide whether or not to proxy, based on # that. # # Accounting requests are generally proxied to the same # home server as authentication requests. # IPASS suffix # ntdomain # # Read the 'acct_users' file files } # # Accounting. Log the accounting data. # accounting { # Update accounting packet by adding the CUI attribute # recorded from the corresponding Access-Accept # use it only if your NAS boxes do not support CUI themselves # cui # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. #radutmp #sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool # # Log traffic to an SQL database. # # See "Accounting queries" in mods-available/sql sql # # If you receive stop packets with zero session length, # they will NOT be logged in the database. The SQL module # will print a message (only in debugging mode), and will # return "noop". # # You can ignore these packets by uncommenting the following # three lines. Otherwise, the server will not respond to the # accounting request, and the NAS will retransmit. # # if (noop) { # ok # } # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # Cisco VoIP specific bulk accounting # pgsql-voip # For Exec-Program and Exec-Program-Wait exec # Filter attributes from the accounting response. attr_filter.accounting_response # # See "Autz-Type Status-Server" for how this works. # # Acct-Type Status-Server { # # } } # Session database, used for checking Simultaneous-Use. Either the radutmp # or rlm_sql module can handle this. # The rlm_sql module is *much* faster session { # radutmp # # See "Simultaneous Use Checking Queries" in mods-available/sql sql } # Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # # If you need to have a State attribute, you can # add it here. e.g. for later CoA-Request with # State, and Service-Type = Authorize-Only. # # if (!&reply:State) { # update reply { # State := "0x%{randstr:16h}" # } # } # # For EAP-TTLS and PEAP, add the cached attributes to the reply. # The "session-state" attributes are automatically cached when # an Access-Challenge is sent, and automatically retrieved # when an Access-Request is received. # # The session-state attributes are automatically deleted after # an Access-Reject or Access-Accept is sent. # update { &reply: += &session-state: } # Get an address from the IP Pool. # main_pool # Create the CUI value and add the attribute to Access-Accept. # Uncomment the line below if *returning* the CUI. # cui # # If you want to have a log of authentication replies, # un-comment the following line, and enable the # 'detail reply_log' module. # reply_log # # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in mods-available/sql sql # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # # Un-comment the following if you want to modify the user's object # in LDAP after a successful login. # # ldap # For Exec-Program and Exec-Program-Wait exec # # Calculate the various WiMAX keys. In order for this to work, # you will need to define the WiMAX NAI, usually via # # update request { # WiMAX-MN-NAI = "%{User-Name}" # } # # If you want various keys to be calculated, you will need to # update the reply with "template" values. The module will see # this, and replace the template values with the correct ones # taken from the cryptographic calculations. e.g. # # update reply { # WiMAX-FA-RK-Key = 0x00 # WiMAX-MSK = "%{EAP-MSK}" # } # # You may want to delete the MS-MPPE-*-Keys from the reply, # as some WiMAX clients behave badly when those attributes # are included. See "raddb/modules/wimax", configuration # entry "delete_mppe_keys" for more information. # # wimax # If there is a client certificate (EAP-TLS, sometimes PEAP # and TTLS), then some attributes are filled out after the # certificate verification has been performed. These fields # MAY be available during the authentication, or they may be # available only in the "post-auth" section. # # The first set of attributes contains information about the # issuing certificate which is being used. The second # contains information about the client certificate (if # available). # # update reply { # Reply-Message += "%{TLS-Cert-Serial}" # Reply-Message += "%{TLS-Cert-Expiration}" # Reply-Message += "%{TLS-Cert-Subject}" # Reply-Message += "%{TLS-Cert-Issuer}" # Reply-Message += "%{TLS-Cert-Common-Name}" # Reply-Message += "%{TLS-Cert-Subject-Alt-Name-Email}" # # Reply-Message += "%{TLS-Client-Cert-Serial}" # Reply-Message += "%{TLS-Client-Cert-Expiration}" # Reply-Message += "%{TLS-Client-Cert-Subject}" # Reply-Message += "%{TLS-Client-Cert-Issuer}" # Reply-Message += "%{TLS-Client-Cert-Common-Name}" # Reply-Message += "%{TLS-Client-Cert-Subject-Alt-Name-Email}" # } # Insert class attribute (with unique value) into response, # aids matching auth and acct records, and protects against duplicate # Acct-Session-Id. Note: Only works if the NAS has implemented # RFC 2865 behaviour for the class attribute, AND if the NAS # supports long Class attributes. Many older or cheap NASes # only support 16-octet Class attributes. # insert_acct_class # MacSEC requires the use of EAP-Key-Name. However, we don't # want to send it for all EAP sessions. Therefore, the EAP # modules put required data into the EAP-Session-Id attribute. # This attribute is never put into a request or reply packet. # # Uncomment the next few lines to copy the required data into # the EAP-Key-Name attribute # if (&reply:EAP-Session-Id) { # update reply { # EAP-Key-Name := &reply:EAP-Session-Id # } # } # Remove reply message if the response contains an EAP-Message remove_reply_message_if_eap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # # Add the ldap module name (or instance) if you have set # 'edir_account_policy_check = yes' in the ldap module configuration # # The "session-state" attributes are not available here. # Post-Auth-Type REJECT { # log failed authentications in SQL, too. sql attr_filter.access_reject # Insert EAP-Failure message if the request was # rejected by policy instead of because of an # authentication failure eap # Remove reply message if the response contains an EAP-Message remove_reply_message_if_eap } } # # When the server decides to proxy a request to a home server, # the proxied request is first passed through the pre-proxy # stage. This stage can re-write the request, or decide to # cancel the proxy. # # Only a few modules currently have this method. # pre-proxy { # Before proxing the request add an Operator-Name attribute identifying # if the operator-name is found for this client. # No need to uncomment this if you have already enabled this in # the authorize section. # operator-name # The client requests the CUI by sending a CUI attribute # containing one zero byte. # Uncomment the line below if *requesting* the CUI. # cui # Uncomment the following line if you want to change attributes # as defined in the preproxy_users file. # files # Uncomment the following line if you want to filter requests # sent to remote servers based on the rules defined in the # 'attrs.pre-proxy' file. # attr_filter.pre-proxy # If you want to have a log of packets proxied to a home # server, un-comment the following line, and the # 'detail pre_proxy_log' section, above. # pre_proxy_log } # # When the server receives a reply to a request it proxied # to a home server, the request may be massaged here, in the # post-proxy stage. # post-proxy { # If you want to have a log of replies from a home server, # un-comment the following line, and the 'detail post_proxy_log' # section, above. # post_proxy_log # Uncomment the following line if you want to filter replies from # remote proxies based on the rules defined in the 'attrs' file. # attr_filter.post-proxy # # If you are proxying LEAP, you MUST configure the EAP # module, and you MUST list it here, in the post-proxy # stage. # # You MUST also use the 'nostrip' option in the 'realm' # configuration. Otherwise, the User-Name attribute # in the proxied request will not match the user name # hidden inside of the EAP packet, and the end server will # reject the EAP request. # eap # # If the server tries to proxy a request and fails, then the # request is processed through the modules in this section. # # The main use of this section is to permit robust proxying # of accounting packets. The server can be configured to # proxy accounting packets as part of normal processing. # Then, if the home server goes down, accounting packets can # be logged to a local "detail" file, for processing with # radrelay. When the home server comes back up, radrelay # will read the detail file, and send the packets to the # home server. # # With this configuration, the server always responds to # Accounting-Requests from the NAS, but only writes # accounting packets to disk if the home server is down. # # Post-Proxy-Type Fail-Accounting { # detail # } } } #################################################################################################################################### # -*- text -*- ###################################################################### # # This is a virtual server that handles *only* inner tunnel # requests for EAP-TTLS and PEAP types. # # $Id: 2c6f9611bfc7b4b782aeb9764e47e832690739c4 $ # ###################################################################### server inner-tunnel { # # This next section is here to allow testing of the "inner-tunnel" # authentication methods, independently from the "default" server. # It is listening on "localhost", so that it can only be used from # the same machine. # # $ radtest USER PASSWORD 127.0.0.1:18120 0 testing123 # # If it works, you have configured the inner tunnel correctly. To check # if PEAP will work, use: # # $ radtest -t mschap USER PASSWORD 127.0.0.1:18120 0 testing123 # # If that works, PEAP should work. If that command doesn't work, then # # FIX THE INNER TUNNEL CONFIGURATION SO THAT IT WORKS. # # Do NOT do any PEAP tests. It won't help. Instead, concentrate # on fixing the inner tunnel configuration. DO NOTHING ELSE. # listen { ipaddr = 127.0.0.1 port = 18120 type = auth } # Authorization. First preprocess (hints and huntgroups files), # then realms, and finally look in the "users" file. # # The order of the realm modules will determine the order that # we try to find a matching realm. # # Make *sure* that 'preprocess' comes before any realm if you # need to setup hints for the remote radius server authorize { # # Take a User-Name, and perform some checks on it, for spaces and other # invalid characters. If the User-Name appears invalid, reject the # request. # # See policy.d/filter for the definition of the filter_username policy. # filter_username # # Do checks on outer / inner User-Name, so that users # can't spoof us by using incompatible identities # # filter_inner_identity # # The chap module will set 'Auth-Type := CHAP' if we are # handling a CHAP request and Auth-Type has not already been set chap # # If the users are logging in with an MS-CHAP-Challenge # attribute for authentication, the mschap module will find # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' # to the request, which will cause the server to then use # the mschap module for authentication. mschap # # Pull crypt'd passwords from /etc/passwd or /etc/shadow, # using the system API's to get the password. If you want # to read /etc/passwd or /etc/shadow directly, see the # passwd module, above. # # unix # # Look for IPASS style 'realm/', and if not found, look for # '@realm', and decide whether or not to proxy, based on # that. # IPASS # # If you are using multiple kinds of realms, you probably # want to set "ignore_null = yes" for all of them. # Otherwise, when the first style of realm doesn't match, # the other styles won't be checked. # # Note that proxying the inner tunnel authentication means # that the user MAY use one identity in the outer session # (e.g. "anonymous", and a different one here # (e.g. "user(a)example.com"). The inner session will then be # proxied elsewhere for authentication. If you are not # careful, this means that the user can cause you to forward # the authentication to another RADIUS server, and have the # accounting logs *not* sent to the other server. This makes # it difficult to bill people for their network activity. # suffix # ntdomain # # The "suffix" module takes care of stripping the domain # (e.g. "@example.com") from the User-Name attribute, and the # next few lines ensure that the request is not proxied. # # If you want the inner tunnel request to be proxied, delete # the next few lines. # update control { &Proxy-To-Realm := LOCAL } # # This module takes care of EAP-MSCHAPv2 authentication. # # It also sets the EAP-Type attribute in the request # attribute list to the EAP type from the packet. # # The example below uses module failover to avoid querying all # of the following modules if the EAP module returns "ok". # Therefore, your LDAP and/or SQL servers will not be queried # for the many packets that go back and forth to set up TTLS # or PEAP. The load on those servers will therefore be reduced. # eap { ok = return } # # Read the 'users' file #files # # Look in an SQL database. The schema of the database # is meant to mirror the "users" file. # # See "Authorization Queries" in sql.conf sql # # If you are using /etc/smbpasswd, and are also doing # mschap authentication, the un-comment this line, and # enable the "smbpasswd" module. # smbpasswd # # The ldap module reads passwords from the LDAP database. -ldap # # Enforce daily limits on time spent logged in. # daily expiration logintime # # If no other module has claimed responsibility for # authentication, then try to use PAP. This allows the # other modules listed above to add a "known good" password # to the request, and to do nothing else. The PAP module # will then see that password, and use it to do PAP # authentication. # # This module should be listed last, so that the other modules # get a chance to set Auth-Type for themselves. # pap } # Authentication. # # # This section lists which modules are available for authentication. # Note that it does NOT mean 'try each module in order'. It means # that a module from the 'authorize' section adds a configuration # attribute 'Auth-Type := FOO'. That authentication type is then # used to pick the appropriate module from the list below. # # In general, you SHOULD NOT set the Auth-Type attribute. The server # will figure it out on its own, and will do the right thing. The # most common side effect of erroneously setting the Auth-Type # attribute is that one authentication method will work, but the # others will not. # # The common reasons to set the Auth-Type attribute by hand # is to either forcibly reject the user, or forcibly accept him. # authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # # Most people want CHAP authentication # A back-end database listed in the 'authorize' section # MUST supply a CLEAR TEXT password. Encrypted passwords # won't work. Auth-Type CHAP { chap } # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # For old names, too. # mschap # # Pluggable Authentication Modules. # pam # Uncomment it if you want to use ldap for authentication # # Note that this means "check plain-text password against # the ldap database", which means that EAP won't work, # as it does not supply a plain-text password. # # We do NOT recommend using this. LDAP servers are databases. # They are NOT authentication servers. FreeRADIUS is an # authentication server, and knows what to do with authentication. # LDAP servers do not. # # Auth-Type LDAP { # ldap # } # # Allow EAP authentication. eap } ###################################################################### # # There are no accounting requests inside of EAP-TTLS or PEAP # tunnels. # ###################################################################### # Session database, used for checking Simultaneous-Use. Either the radutmp # or rlm_sql module can handle this. # The rlm_sql module is *much* faster session { #radutmp # # See "Simultaneous Use Checking Queries" in sql.conf sql } # Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. # # Note that the last packet of the inner-tunnel authentication # MAY NOT BE the last packet of the outer session. So updating # the outer reply MIGHT work, and sometimes MIGHT NOT. The # exact functionality depends on both the inner and outer # authentication methods. # # If you need to send a reply attribute in the outer session, # the ONLY safe way is to set "use_tunneled_reply = yes", and # then update the inner-tunnel reply. post-auth { # If you want privacy to remain, see the # Chargeable-User-Identity attribute from RFC 4372. # If you want to use it just uncomment the line below. # cui-inner # # If you want to have a log of authentication replies, # un-comment the following line, and enable the # 'detail reply_log' module. # reply_log # # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in sql.conf sql # # Instead of sending the query to the SQL server, # write it into a log file. # # sql_log # # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. # # ldap # # Un-comment the following if you want to generate Moonshot (ABFAB) TargetedIds # IMPORTANT: This requires the UUID package to be installed! # # moonshot_host_tid # moonshot_realm_tid # moonshot_coi_tid # # Instead of "use_tunneled_reply", uncomment the # next two "update" blocks. # # update { # &outer.session-state: += &reply: # } # # These attributes are for the inner session only. # They MUST NOT be sent in the outer reply. # # If you uncomment the previous block and leave # this one commented out, WiFi WILL NOT WORK, # because the client will get two MS-MPPE-keys # # update outer.session-state { # MS-MPPE-Encryption-Policy !* ANY # MS-MPPE-Encryption-Types !* ANY # MS-MPPE-Send-Key !* ANY # MS-MPPE-Recv-Key !* ANY # Message-Authenticator !* ANY # EAP-Message !* ANY # Proxy-State !* ANY # } # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # # Add the ldap module name (or instance) if you have set # 'edir_account_policy_check = yes' in the ldap module configuration # Post-Auth-Type REJECT { # log failed authentications in SQL, too. -sql attr_filter.access_reject # # Let the outer session know which module failed, and why. # update outer.session-state { &Module-Failure-Message := &request:Module-Failure-Message } } } # # When the server decides to proxy a request to a home server, # the proxied request is first passed through the pre-proxy # stage. This stage can re-write the request, or decide to # cancel the proxy. # # Only a few modules currently have this method. # pre-proxy { # Uncomment the following line if you want to change attributes # as defined in the preproxy_users file. # files # Uncomment the following line if you want to filter requests # sent to remote servers based on the rules defined in the # 'attrs.pre-proxy' file. # attr_filter.pre-proxy # If you want to have a log of packets proxied to a home # server, un-comment the following line, and the # 'detail pre_proxy_log' section, above. # pre_proxy_log } # # When the server receives a reply to a request it proxied # to a home server, the request may be massaged here, in the # post-proxy stage. # post-proxy { # If you want to have a log of replies from a home server, # un-comment the following line, and the 'detail post_proxy_log' # section, above. # post_proxy_log # Uncomment the following line if you want to filter replies from # remote proxies based on the rules defined in the 'attrs' file. # attr_filter.post-proxy # # If you are proxying LEAP, you MUST configure the EAP # module, and you MUST list it here, in the post-proxy # stage. # # You MUST also use the 'nostrip' option in the 'realm' # configuration. Otherwise, the User-Name attribute # in the proxied request will not match the user name # hidden inside of the EAP packet, and the end server will # reject the EAP request. # eap } } # inner-tunnel server block #################################################################################################################################### Any help would be gretly appreciated Thanks Ryan

4 5

Simultaneous-Use per Realm
by Gabriel Marais 10 Sep '18

10 Sep '18

Hi Guys We are using Freeradius 2.1.12 with MySQL I'm wondering if it is possible to set up the Simultaneous-Use attribute per realm in stead of on a per group basis? We currently have a few groups and inside of those groups, realms. Each group has it's own Simultaneous-Use attribute set up but some of the realms inside of those groups now require their own Simultaneous-Use criteria as they differ from the "blanket" group definition. Is it possible at all? Regards, Gabriel Marais

2 1

Users file containing MAC addresses with hexadecimals cannot authenticate
by Phani Siriki 08 Sep '18

08 Sep '18

Hi Team I am observing an issue when a MAC address with hexadecimals is in users file, the device cannot authenticate. Without hex values it works fine. Did someone have this problem before? Users file: ======= "00:11:01:00:00:0A" Cleartext-Password := "00:11:01:00:00:0A" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = "101", Filter-id = "Radius-block" Log: ==== FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 0.0.0.0/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration Support for old-style clients will be removed in a future release client ::/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap /etc/raddb/sites-enabled/default[540]: Duplicate Auth-Type 'eap' # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 54753 Listening on proxy address :: port 39242 Ready to process requests .... (1) Received Access-Request Id 0 from 172.24.85.245:34555 to 172.24.85.120:1812 length 142 (1) User-Name = "00:11:01:00:00:0a" (1) NAS-Port-Id = "Ethernet1" (1) NAS-Port-Type = Ethernet (1) Calling-Station-Id = "00:11:01:00:00:0a" (1) Called-Station-Id = "A:01:c8:0f" (1) Framed-MTU = 9214 (1) NAS-IP-Address = 172.24.85.245 (1) User-Password = "00:11:01:00:00:0a" (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "00:11:01:00:00:0a", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (1) pap: WARNING: Authentication will fail unless a "known good" password is available (1) [pap] = noop (1) } # authorize = ok (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> 00:11:01:00:00:0a (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 0 from 172.24.85.120:1812 to 172.24.85.245:34555 length 20 (2) Sending delayed response (2) Sent Access-Reject Id 1 from 172.24.85.120:1812 to 172.24.85.245:34555 length 20 Waking up in 3.9 seconds. (1) Cleaning up request packet ID 0 with timestamp +28 (2) Cleaning up request packet ID 1 with timestamp +28 Ready to process requests ^C [root@yagna-freeradius ~]# [root@yagna-freeradius ~]# [root@yagna-freeradius ~]# Without hex values it works fine. [root@yagna-freeradius ~]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 0.0.0.0/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration Support for old-style clients will be removed in a future release client ::/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap /etc/raddb/sites-enabled/default[540]: Duplicate Auth-Type 'eap' # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 60232 Listening on proxy address :: port 60983 Ready to process requests Ready to process requests (7) Received Access-Request Id 0 from 172.24.85.245:34555 to 172.24.85.120:1812 length 142 (7) User-Name = "00:11:01:00:00:01" (7) NAS-Port-Id = "Ethernet1" (7) NAS-Port-Type = Ethernet (7) Calling-Station-Id = "00:11:01:00:00:01" (7) Called-Station-Id = "A:01:c8:0f" (7) Framed-MTU = 9214 (7) NAS-IP-Address = 172.24.85.245 (7) User-Password = "00:11:01:00:00:01" (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "00:11:01:00:00:01", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: No EAP-Message, not doing EAP (7) [eap] = noop (7) files: users: Matched entry 00:11:01:00:00:01 at line 8 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = updated (7) } # authorize = updated (7) Found Auth-Type = PAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Auth-Type PAP { (7) pap: Login attempt with password (7) pap: Comparing with "known good" Cleartext-Password (7) pap: User authenticated successfully (7) [pap] = ok (7) } # Auth-Type PAP = ok (7) # Executing section post-auth from file /etc/raddb/sites-enabled/default (7) post-auth { (7) update { (7) No attributes updated (7) } # update = noop (7) [exec] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # post-auth = noop (7) Sent Access-Accept Id 0 from 172.24.85.120:1812 to 172.24.85.245:34555 length 0 (7) Tunnel-Type = VLAN (7) Tunnel-Medium-Type = IEEE-802 (7) Tunnel-Private-Group-Id = "101" (7) Filter-Id = "Radius-block" (7) Finished request Waking up in 4.9 seconds. ^C

2 13

How to set share secret in binary value?
by CS Clemson 08 Sep '18

08 Sep '18

Hi, I want to set a binary value (a hashed value) in database or clients.conf. How can I set it? I found all examples are using ascii string. Thanks in advance. John Valt.

2 1

About configuration and high availability
by Marcos Renato da Silva Junior 07 Sep '18

07 Sep '18

Hi, I created a testing environment based on two Raspberry Pi (attached diagram), in my tests it has worked well, following the documentation I changed the configuration filesthe least possible, as I have a file server (Samba) and to maintain compatibility with Windows my Openldap has the userPassword, sambaLMPassword and sambaNTPassword attributes (managed by Smbldap-tools), allowing the operation of PEAP/MSCHAPV2, PEAP/GTC and TTLS/PAP, on high availability I am using Corosync / Pacemaker, it works but this is the best way to do things ? Thansk, Marcos Renato. */etc/freeradius/3.0/mods-available/ldap :* ldap { server = 'rasp4.acme.lab' identity = 'cn=admin,dc=acme,dc=lab' password = password base_dn = 'dc=acme,dc=lab' ... ... ... tls { start_tls = yes ca_file = ${certdir}/cacert.pem require_cert = 'demand' } */etc/freeradius/3.0/mods-available/ldap :* update { control:NT-Password := 'sambaNTPassword' control:LM-Password := 'sambaLMPassword' */etc/freeradius/3.0/clients.conf :* client ap1 { ipaddr = 192.168.0.1 secret = password } */etc/freeradius/3.0/radiusd.conf :* log { auth = yes ... ... ... proxy_requests = no #$INCLUDE proxy.conf diagram.jpg -- Marcos Renato da Silva Junior Universidade Estadual Paulista - Unesp Faculdade de Engenharia de Ilha Solteira - FEIS Departamento de Engenharia Elétrica 15385-000 - Ilha Solteira/SP (18) 3743-1164

2 1

help with filtering user names and mac
by lesterpl＠infomed.sld.cu 07 Sep '18

07 Sep '18

Hi, I have a perl script authenticating my users via pop3 and it works fine but I do not want to authenticate all the users of the server. I have a list with the users that I want to authenticate and I would like to know if I can filter them before going on to authenticate with their respective mac. please some idea I was seeing usernames filtres in polici.d filter. ideas or suggestions thousands of thanks Lester ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/

2 1

Re: SQL Query Examples for FreeRadius
by me＠erikthiart.com 06 Sep '18

06 Sep '18

> All of this data should be in an SQL database. You can use normal SQL queries to find this information. > > The schema for FreeRADIUS is well documented. Hello Alan, thanks for replying to my e-mail. First time I am using an email list, I hope this reply-to attempt works as intended... I understand what you are saying, I think my question should’ve been more clear, I am looking for go to queries that the veterans reply on, in my case I had to bump my head when my online users query did not return the data I thought, example my query was: SELECT username FROM radacct WHERE acctstoptime IS NULL Being completely new to freeradius I thought this would work (the logic in my mind checked out), turns out there is a ton of garbage sessions that never closed, mikrotik got shutdown unexpectedly or for whatever other reason, point is if there was a documented collection of SQL queries freeradius users generally rely on, I could have avoided a bit of my time being wasted. So to put it into context what I would like to do is create a page with useful queries, crowdsourced from the freeradius community to help new commers like myself and those after me. I hope this explains it a bit better? PS: You need to read this email from the perspective of me being completely new to this, I am a windows user :P

3 3

How group works in Radius
by Somanath Mishra 06 Sep '18

06 Sep '18

Hi All, We are using Freeradius3. So basic authentication,authorization, accounting is working. We created group in radgroupcheck. On Register user we are storing username with group in radusergroup. So still we are not getting groupname in radacct table. So in debug we found radius only not sending groupname when it is giving input to radacct. We need group for users . Can anyone explain me on how it works for group? Thanks in advance.

3 5

Unable to start radiusd v 3.0.17
by Burn Zero 06 Sep '18

06 Sep '18

Hi, I am unable to start radiusd. I get the below error "tls: Failed changing permissions on /var/run/radiusd: Operation not permitted" I went and checked that radiusd doesn't create directory /var/run/radiusd while starting. Even if I manually create, it gets deleted. How I do solve this? Thank you.

2 1

Freeradius shut down if LDAP fails
by Udhay Ravi 05 Sep '18

05 Sep '18

Hi, I am running freeradius with LDAP as backend authentication. My docker container if started, if the LDAP bind fails, the freeradius never starts. But if the container is UP and running, if the LDAP reachability fails, freeradius continues to stay UP. Is it possible to force kill freeradius if LDAP reachability fails ? -Udhay

2 1