March 2019 - Freeradius-Users - lists.freeradius.org

max file descriptors
by Stefan Winter 13 Mar '19

13 Mar '19

Hello, in src/lib/event.c there is: #define FR_EV_MAX_FDS (512) To my understanding, this limits the number of sockets FreeRADIUS can listen on, as each of those uses a file descriptor. Is there a specific reason for the number 512? I.e. is it worth trying to up it to my liking, or has this been tried before and fails? And, related: if I listen on IPv4 and IPv6 with ipv4addr and ipv6addr, this typically consumes two FDs. Can I have one listen statement with the ipaddr statement which then covers both (maybe the :: address), and does that consume only one FD then? Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 2, avenue de l'Université L-4365 Esch-sur-Alzette Tel: +352 424409 1 Fax: +352 422473 PGP key updated to 4096 Bit RSA - I will encrypt all mails if the recipient's key is known to me http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC0DE6A358A39DC66

2 1

Client Allow List
by Aditya Vijjan 12 Mar '19

12 Mar '19

Hi Team, Can we allow all connections instead of adding client IP in client.conf... -- Thanks & Regards Aditya Vijjan

2 1

RE: Help with Freeradius/freeradius-server Docker Container
by Reuben Fischman 12 Mar '19

12 Mar '19

> Just tried it. Seems to work. You are right in that it does not show > much log information, but you can check whether the server is running by > executing "ps auxw" inside the container > > docker exec -ti my-radius ps aux That's kind of the problem.. The docker container starts and immediately dies so I can't connect to the container. I DID run in debug mode with -X at the end as was suggested. The container still starts and immediately exits. Command I'm executing is: "docker run --name my-radius -d freeradius/freeradius-server -X" After the container dies, I run a "docker container logs my-radius" and get a fair amount of output as the container goes through the startup process. It ends with the following lines: "Failed opening auth address :: port 1812 bound to server default: Address family not supported by protocol /etc/freeradius/sites-enabled/default[245]: Error binding to port for :: port 1812 " It's as if something is already bound to port 1812 within the container. There are no other radius services running on the docker host This docker host is ubuntu 18.04. As a test, I tried to load the container on my synology NAS and it DOES start up with no problem using the same command as above. Not sure what's misconfigured on my ubuntu system. Any ideas/assistance are appreciated.

4 7

Setup on macOS 10.14.3
by Nate Stump 12 Mar '19

12 Mar '19

Does anyone have any great suggestions how to setup this on macOS 10.14.3 since the server app no longer works. Also I would like to continue to use Open Directory as the authentication. Any help is appreciated.

2 1

Freeradius MySQL config testing
by Tal Nur 12 Mar '19

12 Mar '19

Recently I've configured Freeraius 3.0.15 to authenticate users against MySQL DB.I run debug freeradius -X and output looked good (see below) Then I tried to test my configuration by radtest utility but got strange error message: (0) Error parsing "stdin": Unknown name "User-Name" What could the problem with my configuration? The output of freeradius -X: FreeRADIUS Version 3.0.15Copyright (C) 1999-2017 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/dictionaryincluding configuration file /etc/freeradius/radiusd.confincluding configuration file /etc/freeradius/proxy.confincluding configuration file /etc/freeradius/clients.confincluding files in directory /etc/freeradius/mods-enabled/including configuration file /etc/freeradius/mods-enabled/exprincluding configuration file /etc/freeradius/mods-enabled/realmincluding configuration file /etc/freeradius/mods-enabled/radutmpincluding configuration file /etc/freeradius/mods-enabled/unixincluding configuration file /etc/freeradius/mods-enabled/sqlincluding configuration file /etc/freeradius/mods-enabled/sradutmpincluding configuration file /etc/freeradius/mods-enabled/filesincluding configuration file /etc/freeradius/mods-enabled/alwaysincluding configuration file /etc/freeradius/mods-enabled/echoincluding configuration file /etc/freeradius/mods-enabled/dateincluding configuration file /etc/freeradius/mods-enabled/logintimeincluding configuration file /etc/freeradius/mods-enabled/cache_eapincluding configuration file /etc/freeradius/mods-enabled/detailincluding configuration file /etc/freeradius/mods-enabled/preprocessincluding configuration file /etc/freeradius/mods-enabled/mschapincluding configuration file /etc/freeradius/mods-enabled/digestincluding configuration file /etc/freeradius/mods-enabled/utf8including configuration file /etc/freeradius/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/mods-enabled/replicateincluding configuration file /etc/freeradius/mods-enabled/chapincluding configuration file /etc/freeradius/mods-enabled/passwdincluding configuration file /etc/freeradius/mods-enabled/attr_filterincluding configuration file /etc/freeradius/mods-enabled/sohincluding configuration file /etc/freeradius/mods-enabled/detail.logincluding configuration file /etc/freeradius/mods-enabled/linelogincluding configuration file /etc/freeradius/mods-enabled/unpackincluding configuration file /etc/freeradius/mods-enabled/papincluding configuration file /etc/freeradius/mods-enabled/eapincluding configuration file /etc/freeradius/mods-enabled/execincluding configuration file /etc/freeradius/mods-enabled/expirationincluding configuration file /etc/freeradius/mods-enabled/dynamic_clientsincluding files in directory /etc/freeradius/policy.d/including configuration file /etc/freeradius/policy.d/abfab-trincluding configuration file /etc/freeradius/policy.d/operator-nameincluding configuration file /etc/freeradius/policy.d/filterincluding configuration file /etc/freeradius/policy.d/accountingincluding configuration file /etc/freeradius/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/policy.d/controlincluding configuration file /etc/freeradius/policy.d/cuiincluding configuration file /etc/freeradius/policy.d/dhcpincluding configuration file /etc/freeradius/policy.d/eapincluding configuration file /etc/freeradius/policy.d/debugincluding configuration file /etc/freeradius/policy.d/canonicalizationincluding files in directory /etc/freeradius/sites-enabled/including configuration file /etc/freeradius/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/sites-enabled/eduroammain { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius"}main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server kazakhstan { ipaddr = 89.250.80.13 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool EDUROAM { type = fail-over home_server = kazakhstan } realm ~.+$ { pool = EDUROAM nostrip } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm kazrena.kz { nostrip }radiusd: #### Loading Clients #### client kazakhstan-flrs1 { ipaddr = 89.250.80.13 netmask = 32 require_message_authenticator = yes secret = <<< secret >>> shortname = "kaz-flrs1" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = MS-CHAPradiusd: #### Instantiating modules #### modules { # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" }Creating attribute Unix-Group # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 0 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } }rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients instantiate { } # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sqlrlm_sql_mysql: libmysql version: 5.7.25 mysql { tls { } warnings = "auto" }rlm_sql (sql): Attempting to connect to database "radius"rlm_sql (sql): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no }rlm_sql (sql): Opening additional connection (0), 1 of 10 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.25-0ubuntu0.16.04.2, protocol version 10rlm_sql (sql): Opening additional connection (1), 1 of 9 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.25-0ubuntu0.16.04.2, protocol version 10rlm_sql (sql): Opening additional connection (2), 1 of 8 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.25-0ubuntu0.16.04.2, protocol version 10rlm_sql (sql): Opening additional connection (3), 1 of 7 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.25-0ubuntu0.16.04.2, protocol version 10rlm_sql (sql): Opening additional connection (4), 1 of 6 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.25-0ubuntu0.16.04.2, protocol version 10rlm_sql (sql): Processing generate_sql_clientsrlm_sql (sql) in generate_sql_clients: query is SELECT id,nasname,shortname,type,secret FROM nasrlm_sql (sql): Reserved connection (0)rlm_sql (sql): Executing select query: SELECT id,nasname,shortname,type,secret FROM nasrlm_sql (sql): Released connection (0) # Instantiating module "files" from file /etc/freeradius/mods-enabled/filesreading pairlist file /etc/freeradius/mods-config/files/authorizereading pairlist file /etc/freeradius/mods-config/files/accountingreading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocessreading pairlist file /etc/freeradius/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "eduroam-inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "eduroam-inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/radiusd.conf} # serverserver eduroam-inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading post-auth {...}} # server eduroam-inner-tunnelserver eduroam { # from file /etc/freeradius/sites-enabled/eduroam # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...}} # server eduroamradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = 127.0.0.1 port = 18120}listen { type = "auth" ipaddr = * port = 1812}listen { type = "acct" ipaddr = * port = 1813}listen { type = "auth" ipv6addr = :: port = 1812}listen { type = "acct" ipv6addr = :: port = 1813}Listening on auth address 127.0.0.1 port 18120 bound to server eduroam-inner-tunnelListening on auth address * port 1812 bound to server eduroamListening on acct address * port 1813 bound to server eduroamListening on auth address :: port 1812 bound to server eduroamListening on acct address :: port 1813 bound to server eduroamListening on proxy address * port 50172Listening on proxy address :: port 38158Ready to process requests(0) Received Status-Server Id 0 from 89.250.80.13:40748 to 89.250.80.130:1812 length 38(0) Message-Authenticator = 0x712078682adf7d3422a707cef684d4a4(0) Sent Access-Accept Id 0 from 89.250.80.130:1812 to 89.250.80.13:40748 length 0(0) Finished requestWaking up in 4.9 seconds.(0) Cleaning up request packet ID 0 with timestamp +18Ready to process requests(1) Received Status-Server Id 0 from 89.250.80.13:40748 to 89.250.80.130:1812 length 38(1) Message-Authenticator = 0x89328c66f51018c28ab67900587cab99(1) Sent Access-Accept Id 0 from 89.250.80.130:1812 to 89.250.80.13:40748 length 0(1) Finished requestWaking up in 4.9 seconds.(1) Cleaning up request packet ID 0 with timestamp +46Ready to process requests(2) Received Status-Server Id 0 from 89.250.80.13:40748 to 89.250.80.130:1812 length 38(2) Message-Authenticator = 0x7b03bd6e6b03d0b9e1c4d402b3ea18fd(2) Sent Access-Accept Id 0 from 89.250.80.130:1812 to 89.250.80.13:40748 length 0(2) Finished requestWaking up in 4.9 seconds.(2) Cleaning up request packet ID 0 with timestamp +75Ready to process requests(3) Received Status-Server Id 0 from 89.250.80.13:40748 to 89.250.80.130:1812 length 38(3) Message-Authenticator = 0x292248e81208f7a6ee65e40cd3a76e6d(3) Sent Access-Accept Id 0 from 89.250.80.130:1812 to 89.250.80.13:40748 length 0(3) Finished requestWaking up in 4.9 seconds.(3) Cleaning up request packet ID 0 with timestamp +106Ready to process requests(4) Received Status-Server Id 0 from 89.250.80.13:40748 to 89.250.80.130:1812 length 38(4) Message-Authenticator = 0x1cab26257e267d5e84a46bba44bb8bda(4) Sent Access-Accept Id 0 from 89.250.80.130:1812 to 89.250.80.13:40748 length 0(4) Finished requestWaking up in 4.9 seconds.(4) Cleaning up request packet ID 0 with timestamp +135Ready to process requests

2 1

When run "show client config ipaddr" in radmin, it says: ERROR: Unknown command "config"
by John Erickson 12 Mar '19

12 Mar '19

Hi, I'm using freeradius 3 on centos 7. Is the command "show client config ipaddr" in radmin not supported any more ? when run it in radmin, it says: ERROR: Unknown command "config". However, in the man page of radmin, there is still a command "show client config <ipaddr>". I have enabled control-socket in /etc/raddb/sites-enabled, and uncomment "mode = rw" in the control-socket file. There is no problem when run "show client list" in radmin.

2 4

Help with Freeradius/freeradius-server Docker Container
by Reuben Fischman 11 Mar '19

11 Mar '19

I'm attempting to run the freeradius/freeradius-server:latest docker container on top of Ubuntu 18.04. Whenever I execute the docker run example shown on the docker hub, the container seems to start and then immediately quit. Trying to pull log information using docker logs doesn't show anything (empty set is returned) Any help is appreciated!

3 3

Stop the accounting response
by Raghu nathan 10 Mar '19

10 Mar '19

Hello Team, We have the setup to update the postgreSQL database for START and STOP accounting request and its working fine. I would like to have an option to make freeRADIUS not to send reply for any accounting messages but accounting request should get logged in Database. Will it be possible on freeRADIUS 3.0.13? Regards, Raghu

4 4

How to set Acct-Interim-Interval for all users ?
by John Erickson 09 Mar '19

09 Mar '19

Hello, How to add the Acct-Interim-Interval attribute for all users ? I'm using freeradius 3 on centos 7. I know that one way is to insert it into the radreply table or the radgroupreply table. If possible, where and how to set it for all users in the config files under /etc/raddb, so I can avoid adding it many times in the mysql tables ? Thank you.

2 4

Security issues with public CA and signing certificates?
by June Murderer 09 Mar '19

09 Mar '19

Hello everyone, I am following up on what Alan wrote two years ago regarding self-signed certificates and public CAs. The concern was regarding the possibility of setting up a rogue access point. For clients who do not have WiFi pre-configured, does not change anything if it is a self-signed certificate or a certificate from a public CA, because most of the users would trust the *fake* RADIUS certificate if it has all the humanly-readable field of the *original* certificate. For clients who do have WiFi pre-configured, Alan stated that people who use self-signed CAs for RADIUS are safe from this attack, while people who use public CAs might not be safe since someone could pay the $3k or so to get a signing certificate issued by that same CA and create the server certificate. According to Alan, this approach should work because most supplicants historically have not cached the *server* certificate. Instead, they only track the CA certificate. By googling I was able to download the exact CA certificate we use and I was also able to download one of the three signing certificates (I suppose the root), so probably the two signing certficates I wasn't able to find are the intermediate ones. However, on iOS, whenever I download the configuration profile I can see all the info of the CA certificate and the three signing certificates. Would be possible for someone with major hacking skills to deploy the server certificate by downloading or creating the signing certificates with all these informations (not sure whether the private keys can be found)? June.

2 5