December 2020 - Freeradius-Users - lists.freeradius.org

help with xlat
by Matt Zagrabelny 09 Dec '20

09 Dec '20

Greetings FR-users, I've configured my linelog module as such: message { Access-Request = "%S Access Request from calling station %{Calling-Station-Id:-bar}" } but the logging fails: (0) linelog: ERROR: %S Access Request from calling station %{Calling-Station-Id:-bar} (0) linelog: ERROR: ^ Unknown module (0) [linelog] = fail According to the wiki, I feel like the above configuration should work: https://wiki.freeradius.org/config/run_time_variables#conditional-syntax Any ideas what I'm doing wrong? Thanks for the help! -m

2 2

[FreeRadius] Mac Authen with Centos
by yesi 09 Dec '20

09 Dec '20

Hi, I am trying to install FreeRadius to do the Mac Auth. I followed this guide : https://wiki.freeradius.org/guide/mac-auth#mac-auth-or-802-1x <https://wiki.freeradius.org/guide/mac-auth#mac-auth-or-802-1x>. Here are the elements : - server : CentOS Linux release 7.9.2009 (Core) SELinux is disabled. rpm -qa |egrep freeradius freeradius-utils-3.0.13-15.el7.x86_64 freeradius-3.0.13-15.el7.x86_64 - client : a Huawei switch # authentication-profile name ACCESS-MAC mac-access-profile MAC authentication mode multi-authen max-user 100 access-domain toto force # radius-server template TOTO radius-server shared-key cipher tata radius-server authentication 10.x.x.x 1812 vpn-instance management weight 80 # authentication-scheme TOTO authentication-mode radius # domain toto authentication-scheme TOTO accounting-scheme default radius-server TOTO # --- cat /etc/raddb/users bob Auth-Type := Accept, Cleartext-Password := "toto" Reply-Message := "Hello, %{User-Name}" DEFAULT Group == "disabled", Auth-Type := Reject Reply-Message = "Your account has been disabled." DEFAULT Auth-Type := Reject Reply-Message = "\_o< Acces refuse." DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP --- cat /etc/raddb/authorized_macs xx-xx-xx-xx-xx-xx Reply-Message = "Device with MAC Address %{Calling-Station-Id} authorized for network access" --- cat /etc/raddb/sites-enabled/default ... authorize { filter_username preprocess rewrite_calling_station_id authorized_macs if (!ok) { reject } else { update control { Auth-Type := Accept } } auth_log chap mschap digest suffix eap { ok = return } files -sql -ldap expiration logintime pap } I did not modified policy.d/canonicalization from the package cat /etc/raddb/mods-available/files files { moddir = ${modconfdir}/${.:instance} filename = ${moddir}/authorize acctusersfile = ${moddir}/accounting preproxy_usersfile = ${moddir}/pre-proxy } files authorized_macs { key = "%{Calling-Station-ID}" usersfile = ${confdir}/authorized_macs # compat = no -------> if not commented, Configuration item "compat" is deprecated } Here is the message from the switch client : Status : Pre-authen There is no more message. From the switch a test with test user "bob" is ok. In the debug mode, "radiusd -X", there is no message when a machine tried to connect to the switch. Any help would be appreciated. y.

3 3

conditional attribute rewrite.
by Benedikt Sveinsson 09 Dec '20

09 Dec '20

I have a particular problem with our service structure We are getting rid of old freeradius servers that have been operational for years and centralizing everything into two radius servers Due to different access networks , Some users are connected to BNG services that can only terminate or forward to a LNS The users (realm) that are forwarded to the LNS first get a response from our prod radius with modified attributes through the legacy attr file were we add the VPDN config, and then proxied to the old legacy Radius. Our Old LNS then receives the session and authenticates with the legacy radius. Client -> BNG - radius to prod Radius – gets VPDN info towards LNS and proxies auth to legacy radius. Client -> LNS - authenticates to the legacy radius This is all and well, but we have new LNS routers that are going to be terminating these sessions. Now the issue is that I need to be able (if possible to only rewrite the attr (insert LNS / VPN info) if the requests comes from the BNG gateways as they can‘t terminate some of the special realms. (only do normal pppoe users) But when the auth requests comes from the LNS – it shoud not get the VPDN config – else it will just loop. Is it possible to conditionally add the attributes I need based on the NAS / NAS-IP or some other identifier ? (basically I‘m using the routers both for LNS and terminate locally) I have searched and I‘m bit lost both between the legacy config and „new“. - Benni

3 3

Re: FR, LDAP (AD) issues
by Matt Zagrabelny 08 Dec '20

08 Dec '20

Ping? -m On Sat, Dec 5, 2020 at 9:58 PM Matt Zagrabelny <mzagrabe(a)d.umn.edu> wrote: > Greetings FR-users! > > I am having trouble getting FR to bind to LDAP (AD). I believe the issue > is with TLS and the CA's, but I am not sure. Any help verifying the problem > and finding a solution would be very appreciated. > > Here's the version: > > $ apt policy freeradius > freeradius: > Installed: 3.0.17+dfsg-1.1 > > According to package dependencies and readelf, FR is using libssl for > crypto library needs: > > $ readelf -d /usr/sbin/freeradius | grep ssl > 0x0000000000000001 (NEEDED) Shared library: [libssl.so.1.1] > > If I use openssl s_client and connect to the AD system without the CA for > the AD system's cert, I get an error: > > $ echo | openssl s_client -connect ad.umn.edu:636 | grep 'Verification: > OK' > depth=0 CN = dc-tc2.ad.umn.edu > verify error:num=20:unable to get local issuer certificate > verify return:1 > depth=0 CN = dc-tc2.ad.umn.edu > verify error:num=21:unable to verify the first certificate > verify return:1 > DONE > > If I add the authority cert of our AD system to the system's list of CA > certs... > > $ sudo cp /path/to/cert /usr/local/share/ca-certificates/ad.umn.edu.crt > $ sudo update-ca-certificates > > ...I do not get the error: > > $ echo | openssl s_client -connect ad.umn.edu:636 | grep 'Verification: > OK' > depth=1 DC = edu, DC = umn, DC = ad, CN = OIT-CA1-ADRCA > verify return:1 > depth=0 CN = dc-tc1.ad.umn.edu > verify return:1 > Verification: OK > DONE > > Also, ldapsearch executes successfully when the authority cert is added to > the ca-certificates for the system, but fails when the cert is not added to > the ca-certificates. ldapsearch is linked against gnutls. > > However, even with the cert added to the system list of ca-certificates, > it appears FR (at least the LDAP component) is failing. Here is a snippet > of "freeradius -X" > > rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots > used > rlm_ldap (ldap): Connecting to ldaps://ad.umn.edu:636 > TLS: can't connect: (unknown error code). > rlm_ldap (ldap): Bind with > CN=d-ins-ldapuser,OU=ServiceAccounts,OU=INS,OU=D,OU=Units,DC=ad,DC=umn,DC=edu > to ldaps://ad.umn.edu:636 failed: Can't contact LDAP server > > rlm_ldap (ldap): Opening connection failed (0) > rlm_ldap (ldap): Removing connection pool > /etc/freeradius/3.0/mods-enabled/ldap[8]: Instantiation failed for module > "ldap" > > The file that the system CA certificates, and hence the AD certificate > authority, reside in is: > > /etc/ssl/certs/ca-certificates.crt > > An strace of the FR shows that it is opening that file: > > $ sudo strace -f /usr/sbin/freeradius 2>&1 | grep '^open' | grep ssl > > openat(AT_FDCWD, "/usr/lib/freeradius/libssl.so.1.1", O_RDONLY|O_CLOEXEC) > = -1 ENOENT (No such file or directory) > openat(AT_FDCWD, "/usr/lib/x86_64-linux-gnu/libssl.so.1.1", > O_RDONLY|O_CLOEXEC) = 3 > openat(AT_FDCWD, "/usr/lib/ssl/openssl.cnf", O_RDONLY) = 3 > openat(AT_FDCWD, "/usr/lib/ssl/openssl.cnf", O_RDONLY) = 3 > openat(AT_FDCWD, "/etc/ssl/certs/ssl-cert-snakeoil.pem", O_RDONLY) = 3 > openat(AT_FDCWD, "/etc/ssl/certs/ca-certificates.crt", O_RDONLY) = 3 > openat(AT_FDCWD, "/etc/ssl/certs/ca-certificates.crt", O_RDONLY) = 3 > openat(AT_FDCWD, "/etc/ssl/private/ssl-cert-snakeoil.key", O_RDONLY) = 3 > > So... part of me thinks that TLS isn't having issues with the CA of the AD > system. > > I've tried increasing the debugging level with extra -x for freeradius, > but the extra logs don't help me determine where the issue is with ldap. > > What do folks think? This is my first foray into LDAP binding. > > Thanks for any help! > > -m >

3 3

Pick up changes in passwd file
by Markus Gaugusch 08 Dec '20

08 Dec '20

Dear freeradius-experts, I'm using version 3.0.21, running in docker (freeradius/freeradius-server:latest-alpine). I want to use freeradius to authenticate users against entries in a file in the form "username:$2a$10$<bcrypt hash>". This works quite well, using the following stanza: passwd my_passwd { filename = /opt/etc/raddb/ext/pwd.txt format = "*User-Name:Crypt-Password:" hash_size = 100 ignore_nislike = no allow_multiple_keys = no } However, when the file gets modified, the changes are not picked up by freeradius. I checked the FAQ [1], which suggests to use kill -HUP <PID>, but that doesn't work either: Do you have any hints for me to get this resolved? It works by restarting the docker container, but I'd rather avoid this if possible. Actually, my users are stored by a 3rd party application in a postgresql DB. This DB is using a different schema than radiusd (I checked [2]), so I decided to generate the file described above. If it would be easy to access the DB directly using custom SQL queries ONLY for usernames/passwords, that would be another option. I only need authentication, no accounting or any logging into the DB. kind regards, Markus [1]: https://wiki.freeradius.org/guide/FAQ#how-do-i_how-do-i-get-radius-to-pick-… [2]: https://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ub…

2 1

rlm_ldap: Limit accepted TLS versions on LDAPS
by Robert Hentsch-Jesse 07 Dec '20

07 Dec '20

Hello Freeradius Users, I'm using freeradius with the rlm_ldap module to request users from a OpenLDAP server using the LDAPS protocol. Is there any best practice how to limit the accepted TLS versions to 1.2 and 1.3 on the LDAPS connection? SSL and TLS <= 1.1 should be denied. I found a "tls_min_version" option for the rlm_eap module, but not for rlm_ldap. Are there other possibilities than stripping down the used libssl? Thank you in advance and best regards, Robert Hentsch-Jesse ....................................................................................... PHOENIX CONTACT Cyber Security GmbH Richard-Willstätter-Straße 6, 12489 Berlin, Germany Register Court: AG Charlottenburg, HR B 202908 Geschäftsführer/General Manager: Kilian Golm

2 1

rlm_sql Closing Connections
by Ammad Ali 07 Dec '20

07 Dec '20

Hi Guys, I am having below logs in my radius.log file. The connections are getting closed and some it suddenly got utilized and radius spawns new connections and it takes time to spawn. Also connections are getting closed even the idle timeout isn't reached. Please advise. Below are the logs. Mon Dec 7 12:11:06 2020 : Info: Ready to process requests Mon Dec 7 12:11:31 2020 : Warning: rlm_sql (sql): 22 of 22 connections in use. You probably need to increase "spare" Mon Dec 7 12:11:31 2020 : Error: rlm_sql (sql): Cannot open new connection, connection spawning already in progress Mon Dec 7 12:11:31 2020 : Warning: rlm_sql (sql): 23 of 23 connections in use. You probably need to increase "spare" Mon Dec 7 12:11:31 2020 : Info: rlm_sql (sql): Opening additional connection (23) Mon Dec 7 12:11:31 2020 : Warning: rlm_sql (sql): 23 of 23 connections in use. You probably need to increase "spare" Mon Dec 7 12:11:31 2020 : Error: rlm_sql (sql): Cannot open new connection, connection spawning already in progress Mon Dec 7 12:11:52 2020 : Warning: rlm_sql (sql): 24 of 24 connections in use. You probably need to increase "spare" Mon Dec 7 12:11:52 2020 : Info: rlm_sql (sql): Opening additional connection (24) Mon Dec 7 12:13:31 2020 : Info: rlm_sql (sql): Closing connection (15), from 19 unused connections Mon Dec 7 12:13:46 2020 : Info: rlm_sql (sql): Closing connection (27), from 18 unused connections Mon Dec 7 12:13:53 2020 : Info: rlm_sql (sql): Closing connection (4), from 17 unused connections Mon Dec 7 12:13:56 2020 : Info: rlm_sql (sql): Closing connection (21), from 16 unused connections Mon Dec 7 12:13:57 2020 : Info: rlm_sql (sql): Closing connection (2), from 15 unused connections Mon Dec 7 12:13:58 2020 : Info: rlm_sql (sql): Closing connection (12), from 14 unused connections Mon Dec 7 12:13:59 2020 : Info: rlm_sql (sql): Closing connection (13), from 13 unused connections Mon Dec 7 12:14:00 2020 : Info: rlm_sql (sql): Closing connection (29), from 12 unused connections Mon Dec 7 12:14:01 2020 : Info: rlm_sql (sql): Closing connection (18), from 9 unused connections Mon Dec 7 12:14:02 2020 : Info: rlm_sql (sql): Closing connection (36), from 10 unused connections Mon Dec 7 12:14:03 2020 : Info: rlm_sql (sql): Closing connection (33), from 9 unused connections Mon Dec 7 12:14:04 2020 : Info: rlm_sql (sql): Closing connection (17), from 8 unused connections Mon Dec 7 12:14:05 2020 : Info: rlm_sql (sql): Closing connection (23), from 7 unused connections Mon Dec 7 12:14:06 2020 : Info: rlm_sql (sql): Closing connection (8), from 6 unused connections Mon Dec 7 12:14:07 2020 : Info: rlm_sql (sql): Closing connection (37), from 5 unused connections Mon Dec 7 12:14:08 2020 : Info: rlm_sql (sql): Closing connection (35), from 3 unused connections Mon Dec 7 12:14:09 2020 : Info: rlm_sql (sql): Closing connection (14), from 3 unused connections Mon Dec 7 12:14:10 2020 : Info: rlm_sql (sql): Closing connection (31), from 2 unused connections Mon Dec 7 12:14:11 2020 : Info: rlm_sql (sql): Closing connection (11), from 1 unused connections Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 20 of 20 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Info: rlm_sql (sql): Opening additional connection (40) Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 20 of 20 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Error: rlm_sql (sql): Cannot open new connection, connection spawning already in progress Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 20 of 20 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Error: rlm_sql (sql): Cannot open new connection, connection spawning already in progress Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 21 of 21 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Info: rlm_sql (sql): Opening additional connection (41) Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 21 of 21 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Error: rlm_sql (sql): Cannot open new connection, connection spawning already in progress Mon Dec 7 12:14:20 2020 : Warning: rlm_sql (sql): 22 of 22 connections in use. You probably need to increase "spare" Mon Dec 7 12:14:20 2020 : Info: rlm_sql (sql): Opening additional connection (42) Below are my sql config of radius. sql { driver = "rlm_sql_mysql" dialect = "mysql" server = "localhost" port = 3306 login = "nbbdb" radius_db = "nbbdb" acct_table1 = "radacct" acct_table2 = "radacct" postauth_table = "radpostauth" authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" authreply_table = "radreply" groupreply_table = "radgroupreply" usergroup_table = "radusergroup" delete_stale_sessions = yes pool { min = 20 max = ${thread[pool].max_servers} spare = 20 uses = 0 lifetime = 0 idle_timeout = 900 } client_table = "nas" $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf } --

2 3

log proxy auth?
by Matt Zagrabelny 05 Dec '20

05 Dec '20

Greetings, I've looked in both: radiusd.conf proxy.conf for a way to log auth attempts that get routed through a proxy, but I'm not seeing it. I've enabled auth logs via: log { auth = yes } but I'm not seeing my proxied auth attempts in the log. Of course I see details when running radiusd -X: [...] (1) Expecting proxy response no later than 29.666655 seconds from now (1) Received Access-Accept Id 172 from 10.0.0.1:1812 to 192.168.0.1:36687 length 53 [...] (1) Login OK: [bob] (from client foo port 0) (1) Sent Access-Accept Id 222 from 192.168.0.1:1812 to 172.16.0.1:56468 length 0 Is it possible to log proxied auth attempts? Thanks for the help. -m

2 2

Re: Requests being rejected with "Invalid user"
by Dan M 05 Dec '20

05 Dec '20

> Date: Wed, 2 Dec 2020 18:01:15 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > > On Dec 2, 2020, at 5:33 PM, Dan M <dan.red.beard(a)gmail.com> wrote: > > > > We have been running FreeRadius for about 18 months with very light > > traffic and no issues. > > Recently, within the last month, some requests are rejected and a > > message appears in the log Invalid user: [the actual user id] (from > > client <the actual client id> port > > 0) > > That message comes out when the user is rejected. > > > It seems completely random. > > The end user just hits enter again which runs thru the client system > > and generates a new request that succeeds. > > (Well it seems that none of the second requests have failed. I have > > no reports otherwise) The user id seems to me to be identical (at > > least in the log) for both the failure and the success. > > Sure. Sounds like a DB connection issue, TBH. Not using a DB. > > i.e. if FreeRADIUS can't talk to the database, it can't get the user credentials. > So to be safe, it has to reject the user. > > Are there *other* error messages in the logs, around the same time that > user is rejected? Well, that's the thing. There is NOTHING else. I'd have expected something that might identify the reason for the rejection > > > This happened on multiple instances in multiple locations. > > Restarting the instances seemed to clear the issue for a while, but > > it's resurfaced (after about 12 days). > > > > I do not think that the request is getting to the "authorize" phase > > because there is no message from the python plug-in indicating that it > started. > > What "python plugin?" We are using python to make a web service call as part of authorize. Python log has nothing for these requests. So I'm five nines confident it isn't getting that far. Python makes the webservice call which actually does the authentication, and if it succeeds, sets the cleartext password to the password in the request and lets pap (the only thing in authentication section, handle the reply) If it fails, it returns configTuple = (('Auth-Type', "Reject"),)> > i.e. we don't have access to your system. So you shouldn't assume that we > know what you're talking about, when you refer to custom changes you > made. The point was it's getting rejected by something I didn't write and isn't reaching the thing I did. I left all of these in place and haven't changed any of the files. Authorize { filter_username preprocess auth_log suffix expiration logintime python pap } > > > So maybe this comes from some pre-authorize step? > > Maybe. It depends on how you configured it. If the configuration says to > reject the user in the "authorize" stage, then it rejects the user. > > > I scanned all the configuration and don't find that string "Invalid user" > > anywhere, > > so I'm thinking it's generated internally when something else fails. > > It's in the source. > > > Unfortunately, this is in a locked-down, production environment and I > > can't just "start it up in debug mode" > > Is this something you have seen before? > > Is there something I might do to increase the log level? Where, how, > > and of what? > > see raddb/sites-enabled/control-socket, and "radmin". I looked at this and started a different thread about this specifically. > > > We are running version 3.0.17. > > Probably upgrade to 3.0.21. It might not help this issue, but it's not a bad > idea. It's on the long list of maintenance tasks for 2021 > > Alan DeKok. > Lastly, while most requests are generating detail request/reply entries, there are no failures in the detail-reply log. Odd. Dan M Scanned by McAfee and confirmed virus-free. Find out more here: https://bit.ly/2zCJMrO

2 1

Enabling debug level on server
by Dan M 04 Dec '20

04 Dec '20

I need to get debug output without being able to start the server with -X. After reviewing your reply to: Requests being rejected with "Invalid user" and reviewing the related docs I see two options: radmin OR possibly in authorize section Both require config changes and both have challenges in our locked down environment. For using radmin - update control-socket file with socket file name, uid, gid, mode = rw - enable control-socket by creating the symlink - restart Invoke radmin issue useful commands: (possibly using the -f socket_file and -I input_file) show debug level show module list debug file [filename full path] # If I don't set the filename will debug go to the current log file? # e.g. from: log { destination = files file = ${logdir}/radius.log ... # Can I just use the same logfile filename and base logging and debug will go to same file? # Can the debug file name be set permanently in the config somewhere? set debug level 1 # (What is a good/recommended level?) - watch for failures and go read the debug data Alternately, in Vers 3.17 can I just add the below to my authorize section?: update control { Tmp-String-0 = "%{debug:1}" } Does it REQUIRE a conditional? If so would: "if ( "A" == "A") { ... }" suffice? Thanks in advance Dan Mullen Scanned by McAfee and confirmed virus-free. Find out more here: https://bit.ly/2zCJMrO

2 1

iOS doesn't trust server certificate signed by intermediate issuer
by Igor Sousa 04 Dec '20

04 Dec '20

Hi, My institution generated our server certificate by GlobalSign, but we received a server certificate signed by an intermediate issuer, an intermediate issuer. We receveid the server, intermediate and root certificates files. I created a bundle with intermediate and root certificates, in this order an. I configured the /etc/freeradius/mods-enabled/eap as below: private_key_file = <path for server private key that I created> certificate_file = <new path for server.pem received from GlobalSign> ca_file = <path to ca.bundle obtained by cat intermediate.pem >> ca.bundle and cat root.pem >> ca.bundle> I run freeradius service with no issues as well as Android validates server certificate. When I tested the iOS connection the device showed me the server certificate as Not Trusted. I verified server certificate information and it is correct. If I click on the Trust button on the device screen, I can authenticate on Freeradius server with no issues. Is this behavior right? Doesn't iOS trust in server certificate signed by an intermediate chain? -- Igor Sousa

5 7

No logs being generated
by Paul Rattu 03 Dec '20

03 Dec '20

Hello, I've set up and configured my freeradius server but I'm not seeing any log files being generated. In the radiusd.conf file I've uncommented this line " requests = ${logdir}/radiusd-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d.log " and I have auth, auth_badpass, and auth_goodpass set to "yes". According to this file the logs should be generated and put into /var/log/radius but I'm not seeing any log files from freeradius, there's only a folder called radacct which is also empty. I don't think it should matter, but I am running freerad in Debug mode currently, will the logs start generating when I've enabled the service and have it running daemonized? Thanks for any help! For reference, here is the log section from the radiusd.conf file: log { destination = files colourise = yes file = ${logdir}/radius.log requests = ${logdir}/radiusd-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d.log syslog_facility = daemon stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes msg_denied = "You are already logged in - access denied" } -- [image: Cinesite Logo] *Paul Rattu * | Systems Administrator Cinesite | 500-565 Great Northern Way, Vancouver, BC, V5T 0H8 t: +1 604 216 2615 cinesite.com

2 1

Requests being rejected with "Invalid user"
by Dan M 02 Dec '20

02 Dec '20

We have been running FreeRadius for about 18 months with very light traffic and no issues. Recently, within the last month, some requests are rejected and a message appears in the log Invalid user: [the actual user id] (from client <the actual client id> port 0) It seems completely random. The end user just hits enter again which runs thru the client system and generates a new request that succeeds. (Well it seems that none of the second requests have failed. I have no reports otherwise) The user id seems to me to be identical (at least in the log) for both the failure and the success. This happened on multiple instances in multiple locations. Restarting the instances seemed to clear the issue for a while, but it's resurfaced (after about 12 days). I do not think that the request is getting to the "authorize" phase because there is no message from the python plug-in indicating that it started. So maybe this comes from some pre-authorize step? I scanned all the configuration and don't find that string "Invalid user" anywhere, so I'm thinking it's generated internally when something else fails. Unfortunately, this is in a locked-down, production environment and I can't just "start it up in debug mode" Is this something you have seen before? Is there something I might do to increase the log level? Where, how, and of what? We are running version 3.0.17. Dan Mullen Scanned by McAfee and confirmed virus-free. Find out more here: https://bit.ly/2zCJMrO

2 1

Radius authorization
by Bidisha Mandal 02 Dec '20

02 Dec '20

Hi, How to setup Radius for authorization of a client? I'm new to FreeRadius and I'm able to authenticate the client for SSH but where do I need to configure authorization assigned to a user . In /etc/freeradius/3.0/users file I have added a user admincdot as follows - admincdot Cleartext-Password := "123que" Reply-Message := "Hello, %{User-Name}", Session-Timeout := "10" Now I want to authorize this user to perform some certain task or may be a list o command that this user is authorize to perform. Even this Session-Timeout := "10" is not working. As I have read Radius can do this authorization stuff but don't know where to configure this. Let me know if there is any way. Thanks & regards, Bidisha Mandal Research Engineer C-Dot, New Delhi

2 1

PEAP / EAP-TLS
by Thomas Rosenstein 02 Dec '20

02 Dec '20

Hi, I have tried to add EAP-TLS support to my working configuration with PEAP/MSCHAPv2, following: http://notes.asd.me.uk/2012/01/20/freeradius-with-peap-eap-tls-for-microsof… First it complains (/etc/freeradius/sites-enabled/inner-tunnel[26]: Unknown Auth-Type "inner-eap" in authenticate sub-section) about having innereap in the authenticate section of the inner-tunnel, if I leave eap (which I think is correct?!) Then the EAP authentication stops with: (480) eap: Peer sent packet with method EAP NAK (3) (480) eap: Peer NAK'd asking for unsupported EAP type TLS (13), skipping... (480) eap: ERROR: No mutually acceptable types found Which should mean that the inner-eap config file is not working? Currently the inner-eap config looks like that: eap inner-eap { default_eap_type = tls timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no mschapv2 { } tls-config tls-inner { private_key_file = ${raddbdir}/tls-certs/vpn.key certificate_file = ${raddbdir}/tls-certs/vpn.crt ca_file = ${raddbdir}/tls-certs/ca.pem dh_file = ${raddbdir}/tls-certs/dh.pem random_file = /dev/urandom fragment_size = 1024 check_crl = no cipher_list = "DEFAULT" } tls { tls = tls-inner } } I am not sure about the tls-config, the sample files use the tls config like that for the eap file, but the inner-eap sitll has the config directly in the tls sections - anyways, I tried both and same result. Additionally mschapv2 just continues to work, if I add it, or remove it, no change. I'm using: radiusd: FreeRADIUS Version 3.0.20 (git #d94c953), for host x86_64-pc-linux-gnu FreeRADIUS Version 3.0.20 I also read that there's a new option "inner_eap_module" for the PEAP section inside eap, but I can't figure out if that's actually in 3.0.20 or not ... Can someone provide a working config for PEAP/EAP-TLS? Can someone describe why my config is not working? Thanks Thomas

3 4

suggestion for -X and sensitive data
by Matt Zagrabelny 01 Dec '20

01 Dec '20

Greetings FR-users, Reading through the documentation at: http://wiki.freeradius.org/list-help It states to include the full output of radiusd -X. I do believe that the full output includes sensitive information, like passwords, that should not be posted to the mailing list. What do folks think about replacing sensitive information in the output with "removed" or "sensitive data removed", etc? Personally, I think -X could use this new mode by default, and also add an option to not remove sensitive info. The new behavior could be: radiusd -X # no sensitive data leaked radiusd -X --include-sensitive # sensitive data included Alternatively, if you don't want to change the workings of -X, then perhaps add a new option that mimics -X but removes sensitive information. You could copy ssh (-X vs -Y) and choose -Y. radiusd -X # no change - same as today radiusd -Y # just like current -X, but no sensitive data Then advertise radiusd -Y in the wiki if the wiki is going to recommend users post the full output of their radiusd in debug. Just some thoughts. Have a good day! -m

3 3

Freeradius open-ldap Auth
by David Musoke 01 Dec '20

01 Dec '20

Hello Folks, Am trying to set up authentication using open ldap and freeradius. When I run a radtest for one of my users in ldap, i receive access-accept msg But when I try authenticating from a windows or Mac Os user I don't succeed. Below is my debug out-put when i try to authenticate from a windows machine Waking up in 3.3 seconds. (7) Received Access-Request Id 107 from 10.106.1.205:51262 to 196.43.180.27:1812 length 346 (7) User-Name = "dmusoke(a)umu.ac.ug" (7) NAS-IP-Address = 10.106.1.205 (7) NAS-Identifier = "8a8a2055b8c8" (7) Called-Station-Id = "8A-8A-20-55-B8-C8:ICT-TEST" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "34-CF-F6-DA-C0-FA" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "D4000DCC2E7E294C" (7) Acct-Multi-Session-Id = "404A761D1E6EC7B3" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x02da006b1900170303006000000000000000024e01010a4300b62285fefdeb4077f49488e885300adb0b4889fbb5c10f8704a78bff8c25c35d5ac6ec6251511bba311e6773d4e2bf82cc2f75c1b1d0f95ad4125f45d763928b6a9cc31fa0d84abd06f4fcb67d6fe801ff99 (7) State = 0xa8ec0dfaae3614327b0f2a0ced9765ca (7) Message-Authenticator = 0xc878a00d7e991c569dbc46e760bd29c8 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "umu.ac.ug" for User-Name = "dmusoke(a)umu.ac.ug" (7) suffix: Found realm "umu.ac.ug" (7) suffix: Adding Realm = "umu.ac.ug" (7) suffix: Authentication realm is LOCAL (7) [suffix] = ok (7) eap: Peer sent EAP Response (code 2) ID 218 length 107 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xb2a21f7db2780593 (7) eap: Finished EAP session with state 0xa8ec0dfaae361432 (7) eap: Previous EAP request found for state 0xa8ec0dfaae361432, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02da004c1a02da004731a9a56b3b7817dd1e49fa6e1f5ea8c240000000000000000093c169d66ec81330d82a821926ad3be2a76365126cb4ccaf00646d75736f6b6540756d752e61632e7567 (7) eap_peap: Setting User-Name to dmusoke(a)umu.ac.ug (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02da004c1a02da004731a9a56b3b7817dd1e49fa6e1f5ea8c240000000000000000093c169d66ec81330d82a821926ad3be2a76365126cb4ccaf00646d75736f6b6540756d752e61632e7567 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "dmusoke(a)umu.ac.ug" (7) eap_peap: State = 0xb2a21f7db27805937dbad257c82d792b (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02da004c1a02da004731a9a56b3b7817dd1e49fa6e1f5ea8c240000000000000000093c169d66ec81330d82a821926ad3be2a76365126cb4ccaf00646d75736f6b6540756d752e61632e7567 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "dmusoke(a)umu.ac.ug" (7) State = 0xb2a21f7db27805937dbad257c82d792b (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "umu.ac.ug" for User-Name = "dmusoke(a)umu.ac.ug" (7) suffix: Found realm "umu.ac.ug" (7) suffix: Adding Realm = "umu.ac.ug" (7) suffix: Authentication realm is LOCAL (7) [suffix] = ok (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 218 length 76 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (uid=dmusoke(a)umu.ac.ug) (7) ldap: Performing search in "dc=umu,dc=ac,dc=ug" with filter "(uid= dmusoke(a)umu.ac.ug)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "cn=dmusoke(a)umu.ac.ug ,ou=staff,dc=umu,dc=ac,dc=ug" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += '{SSHA}wkHhU0bWVfwT6X5lZVtI4+lD8Bd3ZmYv' rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://196.43.180.28:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) [ldap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (7) pap: Removing &control:Password-With-Header (7) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24 bytes (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xb2a21f7db2780593 (7) eap: Finished EAP session with state 0xb2a21f7db2780593 (7) eap: Previous EAP request found for state 0xb2a21f7db2780593, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (7) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (7) mschap: Creating challenge hash with username: dmusoke(a)umu.ac.ug (7) mschap: Client is using MS-CHAPv2 (7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) [mschap] = reject (7) } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 218 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> dmusoke(a)umu.ac.ug (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = "\332E=691 R=1 C=a647d2920e720b1be308ea4a20115ec7 V=3 M=Authentication rejected" (7) EAP-Message = 0x04da0004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = "\332E=691 R=1 C=a647d2920e720b1be308ea4a20115ec7 V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04da0004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = "\332E=691 R=1 C=a647d2920e720b1be308ea4a20115ec7 V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04da0004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 219 length 46 (7) eap: EAP session adding &reply:State = 0xa8ec0dfaaf371432 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (7) Sent Access-Challenge Id 107 from 196.43.180.27:1812 to 10.106.1.205:51262 length 0 (7) EAP-Message = 0x01db002e19001703030023d9a6aef0855958dee03f672cdd1211150670d06a1d3bfee502e4cc34ef1b2e235a66d0 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xa8ec0dfaaf3714327b0f2a0ced9765ca (7) Finished request *RegardsDavid Musoke* *ICT Department* *Mob: +256773731776* * +256757414650* --

2 1

1st time authentication of a supplicant loops
by Axel Rau 01 Dec '20

01 Dec '20

Hi all, I’m new to FreeRadius and working on a WLAN application with MikroTik NAS and dynamic VLANs. My supplicants are Apple devices (recent OS version on iMac and iPhone, 10.13 on a MacBook). When such a supplicant switches the WLAN to my test-WLAN and authenticates 1st time the authentication process loops and takes very long and fails sometimes totally. When I add a MAC-based entry of the device being tested to the username/password entry like so "D6:B5:E4:2A:3A:1C" Cleartext-Password := "D6:B5:E4:2A:3A:1C" it succeeds immediately (example appended). This requirement makes it impossible for me to have a guest account, where the mac addresses are unknown. I could provide a trace of such an unsuccessful authentication attempt, but I would prefer to provide it as attachment, because it will be very long. Any help greatly appreciated, Axel ps: the trace follows: - - - FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "_freeradius" group = "_freeradius" allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/var" sbindir = "/usr/local/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/local/lib/freeradius/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client wlan.chaos1.de { ipaddr = cap01.wlan.chaos1.de IPv4 address [172.16.63.11] require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Found debugger attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 7024 Listening on proxy address :: port 15596 Ready to process requests (0) Received Access-Request Id 162 from 172.16.63.11:59852 to 172.16.63.9:1812 length 170 (0) Service-Type = Framed-User (0) NAS-Port-Id = "cap02_2" (0) NAS-Port-Type = Wireless-802.11 (0) User-Name = "F8:1E:DF:E8:F6:A5" (0) User-Password = "F8:1E:DF:E8:F6:A5" (0) Acct-Session-Id = "8240030b" (0) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (0) Called-Station-Id = "C4-AD-34-F5-4D-1E" (0) NAS-Identifier = "cap01.wlan.chaos1.de" (0) NAS-IP-Address = 172.16.63.11 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "F8:1E:DF:E8:F6:A5", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry DEFAULT at line 101 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: Auth-Type already set. Not setting to PAP (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 162 from 172.16.63.9:1812 to 172.16.63.11:59852 length 0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 163 from 172.16.63.11:50616 to 172.16.63.9:1812 length 178 (1) Service-Type = Framed-User (1) Framed-MTU = 1400 (1) User-Name = "ajr_at_macbook" (1) NAS-Port-Id = "cap02_2" (1) NAS-Port-Type = Wireless-802.11 (1) Acct-Session-Id = "8240030c" (1) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (1) Called-Station-Id = "C4-AD-34-F5-4D-1E" (1) EAP-Message = 0x0200001301616a725f61745f6d6163626f6f6b (1) Message-Authenticator = 0xed75742633a9ad4e33517281b61ea04a (1) NAS-Identifier = "cap01.wlan.chaos1.de" (1) NAS-IP-Address = 172.16.63.11 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 0 length 19 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 1 length 22 (1) eap: EAP session adding &reply:State = 0x5ccd2a915ccc2e5e (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 163 from 172.16.63.9:1812 to 172.16.63.11:50616 length 0 (1) EAP-Message = 0x0101001604109b5a60831a39204ae1b6665c05386350 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x5ccd2a915ccc2e5e8c2e845aad07e421 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 164 from 172.16.63.11:36308 to 172.16.63.9:1812 length 185 (2) Service-Type = Framed-User (2) Framed-MTU = 1400 (2) User-Name = "ajr_at_macbook" (2) State = 0x5ccd2a915ccc2e5e8c2e845aad07e421 (2) NAS-Port-Id = "cap02_2" (2) NAS-Port-Type = Wireless-802.11 (2) Acct-Session-Id = "8240030c" (2) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (2) Called-Station-Id = "C4-AD-34-F5-4D-1E" (2) EAP-Message = 0x020100080319152b (2) Message-Authenticator = 0xeb0369e55b64ffb2773ebae477160aa8 (2) NAS-Identifier = "cap01.wlan.chaos1.de" (2) NAS-IP-Address = 172.16.63.11 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 1 length 8 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry ajr_at_macbook at line 30 (2) [files] = ok (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x5ccd2a915ccc2e5e (2) eap: Finished EAP session with state 0x5ccd2a915ccc2e5e (2) eap: Previous EAP request found for state 0x5ccd2a915ccc2e5e, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 2 length 6 (2) eap: EAP session adding &reply:State = 0x5ccd2a915dcf335e (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 164 from 172.16.63.9:1812 to 172.16.63.11:36308 length 0 (2) Tunnel-Type = VLAN (2) Tunnel-Medium-Type = IEEE-802 (2) Mikrotik-Wireless-VLANID = 13 (2) Mikrotik-Wireless-VLANID-Type = 0 (2) Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (2) EAP-Message = 0x010200061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x5ccd2a915dcf335e8c2e845aad07e421 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 165 from 172.16.63.11:56987 to 172.16.63.9:1812 length 338 (3) Service-Type = Framed-User (3) Framed-MTU = 1400 (3) User-Name = "ajr_at_macbook" (3) State = 0x5ccd2a915dcf335e8c2e845aad07e421 (3) NAS-Port-Id = "cap02_2" (3) NAS-Port-Type = Wireless-802.11 (3) Acct-Session-Id = "8240030c" (3) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (3) Called-Station-Id = "C4-AD-34-F5-4D-1E" (3) EAP-Message = 0x020200a119800000009716030100920100008e03035fc3ecb70b98ace80fd25b9733d4d44c45167b8638bdf4e4b67b5f721a899abe00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (3) Message-Authenticator = 0x030b890dacbe370cef8d1516e2648805 (3) NAS-Identifier = "cap01.wlan.chaos1.de" (3) NAS-IP-Address = 172.16.63.11 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 2 length 161 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x5ccd2a915dcf335e (3) eap: Finished EAP session with state 0x5ccd2a915dcf335e (3) eap: Previous EAP request found for state 0x5ccd2a915dcf335e, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 151 bytes (3) eap_peap: Got complete TLS record (151 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before/accept initialization (3) eap_peap: TLS_accept: before/accept initialization (3) eap_peap: <<< recv TLS 1.2 [length 0092] (3) eap_peap: TLS_accept: SSLv3 read client hello A (3) eap_peap: >>> send TLS 1.2 [length 0037] (3) eap_peap: TLS_accept: SSLv3 write server hello A (3) eap_peap: >>> send TLS 1.2 [length 0c2d] (3) eap_peap: TLS_accept: SSLv3 write certificate A (3) eap_peap: >>> send TLS 1.2 [length 014d] (3) eap_peap: TLS_accept: SSLv3 write key exchange A (3) eap_peap: >>> send TLS 1.2 [length 0004] (3) eap_peap: TLS_accept: SSLv3 write server done A (3) eap_peap: TLS_accept: SSLv3 flush data (3) eap_peap: TLS_accept: SSLv3 read client certificate A (3) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (3) eap_peap: TLS - In Handshake Phase (3) eap_peap: TLS - got 3529 bytes of data (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 3 length 1004 (3) eap: EAP session adding &reply:State = 0x5ccd2a915ece335e (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 165 from 172.16.63.9:1812 to 172.16.63.11:56987 length 0 (3) EAP-Message = 0x010303ec19c000000dc91603030037020000330303c60a90a11f21e7b21b3f362afeebedafc6f3046ff6a6f7c317c9c427e2b88d1700c03000000bff01000100000b000201001603030c2d0b000c29000c260005103082050c308202f4a003020102020101300d06092a864886f70d01010b050030819f310b3009060355040613024445310f300d06035504080c0648657373656e311a301806035504070c114672616e6b6675727420616d204d61696e31143012060355040a0c0b4c4543484e45522d5241553128302606092a864886f70d010901161973656375726974792d6d616e61676572406c7261752e6e65743123302106035504030c1a4c4543484e45522d52415520776c616e20726164697573204341301e170d3230303932373134353833335a170d3330303932353134353833335a308187310b3009060355040613024445310f300d06035504080c0648657373656e31143012060355040a0c0b4c4543484e45522d5241553127302506035504030c (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x5ccd2a915ece335e8c2e845aad07e421 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 166 from 172.16.63.11:48403 to 172.16.63.9:1812 length 183 (4) Service-Type = Framed-User (4) Framed-MTU = 1400 (4) User-Name = "ajr_at_macbook" (4) State = 0x5ccd2a915ece335e8c2e845aad07e421 (4) NAS-Port-Id = "cap02_2" (4) NAS-Port-Type = Wireless-802.11 (4) Acct-Session-Id = "8240030c" (4) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (4) Called-Station-Id = "C4-AD-34-F5-4D-1E" (4) EAP-Message = 0x020300061900 (4) Message-Authenticator = 0x20d68b7ad116e5f01c7b7861b323f3e0 (4) NAS-Identifier = "cap01.wlan.chaos1.de" (4) NAS-IP-Address = 172.16.63.11 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 3 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x5ccd2a915ece335e (4) eap: Finished EAP session with state 0x5ccd2a915ece335e (4) eap: Previous EAP request found for state 0x5ccd2a915ece335e, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 4 length 1000 (4) eap: EAP session adding &reply:State = 0x5ccd2a915fc9335e (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 166 from 172.16.63.9:1812 to 172.16.63.11:48403 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x5ccd2a915fc9335e8c2e845aad07e421 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 167 from 172.16.63.11:43018 to 172.16.63.9:1812 length 183 (5) Service-Type = Framed-User (5) Framed-MTU = 1400 (5) User-Name = "ajr_at_macbook" (5) State = 0x5ccd2a915fc9335e8c2e845aad07e421 (5) NAS-Port-Id = "cap02_2" (5) NAS-Port-Type = Wireless-802.11 (5) Acct-Session-Id = "8240030c" (5) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (5) Called-Station-Id = "C4-AD-34-F5-4D-1E" (5) EAP-Message = 0x020400061900 (5) Message-Authenticator = 0xa670404d1c9dea94c4621380d1e0629d (5) NAS-Identifier = "cap01.wlan.chaos1.de" (5) NAS-IP-Address = 172.16.63.11 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 4 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x5ccd2a915fc9335e (5) eap: Finished EAP session with state 0x5ccd2a915fc9335e (5) eap: Previous EAP request found for state 0x5ccd2a915fc9335e, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment (5) eap_peap: [eaptls verify] = request (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 5 length 1000 (5) eap: EAP session adding &reply:State = 0x5ccd2a9158c8335e (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 167 from 172.16.63.9:1812 to 172.16.63.11:43018 length 0 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x5ccd2a9158c8335e8c2e845aad07e421 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 168 from 172.16.63.11:54129 to 172.16.63.9:1812 length 183 (6) Service-Type = Framed-User (6) Framed-MTU = 1400 (6) User-Name = "ajr_at_macbook" (6) State = 0x5ccd2a9158c8335e8c2e845aad07e421 (6) NAS-Port-Id = "cap02_2" (6) NAS-Port-Type = Wireless-802.11 (6) Acct-Session-Id = "8240030c" (6) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (6) Called-Station-Id = "C4-AD-34-F5-4D-1E" (6) EAP-Message = 0x020500061900 (6) Message-Authenticator = 0xe8d5d68f356567e50a524ca086ad69e8 (6) NAS-Identifier = "cap01.wlan.chaos1.de" (6) NAS-IP-Address = 172.16.63.11 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 5 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x5ccd2a9158c8335e (6) eap: Finished EAP session with state 0x5ccd2a9158c8335e (6) eap: Previous EAP request found for state 0x5ccd2a9158c8335e, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment (6) eap_peap: [eaptls verify] = request (6) eap_peap: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 6 length 553 (6) eap: EAP session adding &reply:State = 0x5ccd2a9159cb335e (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 168 from 172.16.63.9:1812 to 172.16.63.11:54129 length 0 (6) EAP-Message = 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 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x5ccd2a9159cb335e8c2e845aad07e421 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 169 from 172.16.63.11:36770 to 172.16.63.9:1812 length 313 (7) Service-Type = Framed-User (7) Framed-MTU = 1400 (7) User-Name = "ajr_at_macbook" (7) State = 0x5ccd2a9159cb335e8c2e845aad07e421 (7) NAS-Port-Id = "cap02_2" (7) NAS-Port-Type = Wireless-802.11 (7) Acct-Session-Id = "8240030c" (7) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (7) Called-Station-Id = "C4-AD-34-F5-4D-1E" (7) EAP-Message = 0x0206008819800000007e1603030046100000424104464cde0f6e8d923b7fd33de5af04291dce99283951644f277a9b5896ff89746f839388f580c4fa81c3519a72441b09787db73001ed17d42fe011bd887e12b6f31403030001011603030028ebaeed68d0719763393e9526f01d3aa2409a97526aa593376f9c4bbb20695f013a791614e52c426f (7) Message-Authenticator = 0x057a686cdacb1db961483095bc7cd077 (7) NAS-Identifier = "cap01.wlan.chaos1.de" (7) NAS-IP-Address = 172.16.63.11 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 6 length 136 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x5ccd2a9159cb335e (7) eap: Finished EAP session with state 0x5ccd2a9159cb335e (7) eap: Previous EAP request found for state 0x5ccd2a9159cb335e, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer indicated complete TLS record size will be 126 bytes (7) eap_peap: Got complete TLS record (126 bytes) (7) eap_peap: [eaptls verify] = length included (7) eap_peap: <<< recv TLS 1.2 [length 0046] (7) eap_peap: TLS_accept: SSLv3 read client key exchange A (7) eap_peap: <<< recv TLS 1.2 [length 0001] (7) eap_peap: <<< recv TLS 1.2 [length 0010] (7) eap_peap: TLS_accept: SSLv3 read finished A (7) eap_peap: >>> send TLS 1.2 [length 0001] (7) eap_peap: TLS_accept: SSLv3 write change cipher spec A (7) eap_peap: >>> send TLS 1.2 [length 0010] (7) eap_peap: TLS_accept: SSLv3 write finished A (7) eap_peap: TLS_accept: SSLv3 flush data (7) eap_peap: (other): SSL negotiation finished successfully (7) eap_peap: TLS - Connection Established (7) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) eap_peap: TLS-Session-Version = "TLS 1.2" (7) eap_peap: TLS - got 51 bytes of data (7) eap_peap: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 7 length 57 (7) eap: EAP session adding &reply:State = 0x5ccd2a915aca335e (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 169 from 172.16.63.9:1812 to 172.16.63.11:36770 length 0 (7) EAP-Message = 0x010700391900140303000101160303002800000000000000007f92a6ba369d6a0f6468886cded89ba3bc43763615f67ee2e0927b5a1ebd5156 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x5ccd2a915aca335e8c2e845aad07e421 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 170 from 172.16.63.11:40417 to 172.16.63.9:1812 length 183 (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) User-Name = "ajr_at_macbook" (8) State = 0x5ccd2a915aca335e8c2e845aad07e421 (8) NAS-Port-Id = "cap02_2" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "8240030c" (8) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (8) Called-Station-Id = "C4-AD-34-F5-4D-1E" (8) EAP-Message = 0x020700061900 (8) Message-Authenticator = 0x68de1012ff5a634cf1b8a626bc1855e9 (8) NAS-Identifier = "cap01.wlan.chaos1.de" (8) NAS-IP-Address = 172.16.63.11 (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 6 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x5ccd2a915aca335e (8) eap: Finished EAP session with state 0x5ccd2a915aca335e (8) eap: Previous EAP request found for state 0x5ccd2a915aca335e, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: Peer ACKed our handshake fragment. handshake is finished (8) eap_peap: [eaptls verify] = success (8) eap_peap: [eaptls process] = success (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state TUNNEL ESTABLISHED (8) eap: Sending EAP Request (code 1) ID 8 length 40 (8) eap: EAP session adding &reply:State = 0x5ccd2a915bc5335e (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 170 from 172.16.63.9:1812 to 172.16.63.11:40417 length 0 (8) EAP-Message = 0x010800281900170303001d0000000000000001a9bd52657f27db99c12d7d708b814c50355ee3ff4f (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x5ccd2a915bc5335e8c2e845aad07e421 (8) Finished request Waking up in 4.7 seconds. (9) Received Access-Request Id 171 from 172.16.63.11:54871 to 172.16.63.9:1812 length 227 (9) Service-Type = Framed-User (9) Framed-MTU = 1400 (9) User-Name = "ajr_at_macbook" (9) State = 0x5ccd2a915bc5335e8c2e845aad07e421 (9) NAS-Port-Id = "cap02_2" (9) NAS-Port-Type = Wireless-802.11 (9) Acct-Session-Id = "8240030c" (9) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (9) Called-Station-Id = "C4-AD-34-F5-4D-1E" (9) EAP-Message = 0x0208003219001703030027ebaeed68d0719764292c296493f59a4689254d0b59d4e9723993e03afcfd8350440f4d6ec5104c (9) Message-Authenticator = 0x4d7ae6f016f661657fd6b19ec86e9c12 (9) NAS-Identifier = "cap01.wlan.chaos1.de" (9) NAS-IP-Address = 172.16.63.11 (9) Restoring &session-state (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 50 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x5ccd2a915bc5335e (9) eap: Finished EAP session with state 0x5ccd2a915bc5335e (9) eap: Previous EAP request found for state 0x5ccd2a915bc5335e, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state WAITING FOR INNER IDENTITY (9) eap_peap: Identity - ajr_at_macbook (9) eap_peap: Got inner identity 'ajr_at_macbook' (9) eap_peap: Setting default EAP type for tunneled EAP session (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x0208001301616a725f61745f6d6163626f6f6b (9) eap_peap: Setting User-Name to ajr_at_macbook (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x0208001301616a725f61745f6d6163626f6f6b (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "ajr_at_macbook" (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x0208001301616a725f61745f6d6163626f6f6b (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "ajr_at_macbook" (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 19 (9) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Peer sent packet with method EAP Identity (1) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: Issuing Challenge (9) eap: Sending EAP Request (code 1) ID 9 length 43 (9) eap: EAP session adding &reply:State = 0x287be8ee2872f246 (9) [eap] = handled (9) } # authenticate = handled (9) } # server inner-tunnel (9) Virtual server sending reply (9) EAP-Message = 0x0109002b1a01090026104f1c4fbc5f3fcae7e030a11e6b5eaea8667265657261646975732d332e302e3231 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x287be8ee2872f24656459491fa7b8c64 (9) eap_peap: Got tunneled reply code 11 (9) eap_peap: EAP-Message = 0x0109002b1a01090026104f1c4fbc5f3fcae7e030a11e6b5eaea8667265657261646975732d332e302e3231 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0x287be8ee2872f24656459491fa7b8c64 (9) eap_peap: Got tunneled reply RADIUS code 11 (9) eap_peap: EAP-Message = 0x0109002b1a01090026104f1c4fbc5f3fcae7e030a11e6b5eaea8667265657261646975732d332e302e3231 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0x287be8ee2872f24656459491fa7b8c64 (9) eap_peap: Got tunneled Access-Challenge (9) eap: Sending EAP Request (code 1) ID 9 length 74 (9) eap: EAP session adding &reply:State = 0x5ccd2a9154c4335e (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 171 from 172.16.63.9:1812 to 172.16.63.11:54871 length 0 (9) EAP-Message = 0x0109004a1900170303003f000000000000000293e69b2290e905927832c32c18e0342ab07fd1793ed19854d46535ebc3d7c97865c1aea3b04767e26863a2d63d2327da92077a0dde3e54 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x5ccd2a9154c4335e8c2e845aad07e421 (9) Finished request Waking up in 4.7 seconds. (10) Received Access-Request Id 172 from 172.16.63.11:38409 to 172.16.63.9:1812 length 281 (10) Service-Type = Framed-User (10) Framed-MTU = 1400 (10) User-Name = "ajr_at_macbook" (10) State = 0x5ccd2a9154c4335e8c2e845aad07e421 (10) NAS-Port-Id = "cap02_2" (10) NAS-Port-Type = Wireless-802.11 (10) Acct-Session-Id = "8240030c" (10) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (10) Called-Station-Id = "C4-AD-34-F5-4D-1E" (10) EAP-Message = 0x020900681900170303005debaeed68d071976582446411710009b74077847b8932663bee78453334226e6b595114148c774bd35b5ec8cc9af6ecbccb3117c5062f1e318be465b2e493ed2b4e1d45f58893c913f71344560ef48c5504d211b150dd5ede4ae9cfde31 (10) Message-Authenticator = 0xc11da8127cd74925532b01f790876e63 (10) NAS-Identifier = "cap01.wlan.chaos1.de" (10) NAS-IP-Address = 172.16.63.11 (10) Restoring &session-state (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 104 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x287be8ee2872f246 (10) eap: Finished EAP session with state 0x5ccd2a9154c4335e (10) eap: Previous EAP request found for state 0x5ccd2a9154c4335e, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state phase2 (10) eap_peap: EAP method MSCHAPv2 (26) (10) eap_peap: Got tunneled request (10) eap_peap: EAP-Message = 0x020900491a02090044310718db4dc9454966aebc7874449472950000000000000000b3858f6a34c7d630f8912a1c043120a9bede5319ce142add00616a725f61745f6d6163626f6f6b (10) eap_peap: Setting User-Name to ajr_at_macbook (10) eap_peap: Sending tunneled request to inner-tunnel (10) eap_peap: EAP-Message = 0x020900491a02090044310718db4dc9454966aebc7874449472950000000000000000b3858f6a34c7d630f8912a1c043120a9bede5319ce142add00616a725f61745f6d6163626f6f6b (10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (10) eap_peap: User-Name = "ajr_at_macbook" (10) eap_peap: State = 0x287be8ee2872f24656459491fa7b8c64 (10) Virtual server inner-tunnel received request (10) EAP-Message = 0x020900491a02090044310718db4dc9454966aebc7874449472950000000000000000b3858f6a34c7d630f8912a1c043120a9bede5319ce142add00616a725f61745f6d6163626f6f6b (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "ajr_at_macbook" (10) State = 0x287be8ee2872f24656459491fa7b8c64 (10) WARNING: Outer and inner identities are the same. User privacy is compromised. (10) server inner-tunnel { (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [chap] = noop (10) [mschap] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) update control { (10) &Proxy-To-Realm := LOCAL (10) } # update control = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 73 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) files: users: Matched entry ajr_at_macbook at line 30 (10) [files] = ok (10) [expiration] = noop (10) [logintime] = noop (10) pap: WARNING: Auth-Type already set. Not setting to PAP (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) authenticate { (10) eap: Expiring EAP session with state 0x287be8ee2872f246 (10) eap: Finished EAP session with state 0x287be8ee2872f246 (10) eap: Previous EAP request found for state 0x287be8ee2872f246, released from the list (10) eap: Peer sent packet with method EAP MSCHAPv2 (26) (10) eap: Calling submodule eap_mschapv2 to process data (10) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) eap_mschapv2: authenticate { (10) mschap: Found Cleartext-Password, hashing to create NT-Password (10) mschap: Creating challenge hash with username: ajr_at_macbook (10) mschap: Client is using MS-CHAPv2 (10) mschap: Adding MS-CHAPv2 MPPE keys (10) eap_mschapv2: [mschap] = ok (10) eap_mschapv2: } # authenticate = ok (10) eap_mschapv2: MSCHAP Success (10) eap: Sending EAP Request (code 1) ID 10 length 51 (10) eap: EAP session adding &reply:State = 0x287be8ee2971f246 (10) [eap] = handled (10) } # authenticate = handled (10) } # server inner-tunnel (10) Virtual server sending reply (10) Tunnel-Type = VLAN (10) Tunnel-Medium-Type = IEEE-802 (10) Mikrotik-Wireless-VLANID = 13 (10) Mikrotik-Wireless-VLANID-Type = 0 (10) Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (10) EAP-Message = 0x010a00331a0309002e533d45384432423830324536424446353639443042353937384237453330314534364342373137353530 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x287be8ee2971f24656459491fa7b8c64 (10) eap_peap: Got tunneled reply code 11 (10) eap_peap: Tunnel-Type = VLAN (10) eap_peap: Tunnel-Medium-Type = IEEE-802 (10) eap_peap: Mikrotik-Wireless-VLANID = 13 (10) eap_peap: Mikrotik-Wireless-VLANID-Type = 0 (10) eap_peap: Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (10) eap_peap: EAP-Message = 0x010a00331a0309002e533d45384432423830324536424446353639443042353937384237453330314534364342373137353530 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x287be8ee2971f24656459491fa7b8c64 (10) eap_peap: Got tunneled reply RADIUS code 11 (10) eap_peap: Tunnel-Type = VLAN (10) eap_peap: Tunnel-Medium-Type = IEEE-802 (10) eap_peap: Mikrotik-Wireless-VLANID = 13 (10) eap_peap: Mikrotik-Wireless-VLANID-Type = 0 (10) eap_peap: Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (10) eap_peap: EAP-Message = 0x010a00331a0309002e533d45384432423830324536424446353639443042353937384237453330314534364342373137353530 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x287be8ee2971f24656459491fa7b8c64 (10) eap_peap: Got tunneled Access-Challenge (10) eap: Sending EAP Request (code 1) ID 10 length 82 (10) eap: EAP session adding &reply:State = 0x5ccd2a9155c7335e (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) session-state: Saving cached attributes (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) Sent Access-Challenge Id 172 from 172.16.63.9:1812 to 172.16.63.11:38409 length 0 (10) EAP-Message = 0x010a0052190017030300470000000000000003dfc5ddef832faa31d785298471f5a5228c260ad5a33e5214aa890f65a52078ebca88b7a54eea55e5ed48b92d8b3d8a44864bd353a1b308e24ffeb41f04c5b4 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x5ccd2a9155c7335e8c2e845aad07e421 (10) Finished request Waking up in 4.7 seconds. (11) Received Access-Request Id 173 from 172.16.63.11:57477 to 172.16.63.9:1812 length 214 (11) Service-Type = Framed-User (11) Framed-MTU = 1400 (11) User-Name = "ajr_at_macbook" (11) State = 0x5ccd2a9155c7335e8c2e845aad07e421 (11) NAS-Port-Id = "cap02_2" (11) NAS-Port-Type = Wireless-802.11 (11) Acct-Session-Id = "8240030c" (11) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (11) Called-Station-Id = "C4-AD-34-F5-4D-1E" (11) EAP-Message = 0x020a00251900170303001aebaeed68d07197660c82dc1897c5e8f16731b8ff544f93ed98bf (11) Message-Authenticator = 0x74ebfdc15d084aef6b02b71a638d657d (11) NAS-Identifier = "cap01.wlan.chaos1.de" (11) NAS-IP-Address = 172.16.63.11 (11) Restoring &session-state (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 10 length 37 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x287be8ee2971f246 (11) eap: Finished EAP session with state 0x5ccd2a9155c7335e (11) eap: Previous EAP request found for state 0x5ccd2a9155c7335e, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Continuing EAP-TLS (11) eap_peap: [eaptls verify] = ok (11) eap_peap: Done initial handshake (11) eap_peap: [eaptls process] = ok (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state phase2 (11) eap_peap: EAP method MSCHAPv2 (26) (11) eap_peap: Got tunneled request (11) eap_peap: EAP-Message = 0x020a00061a03 (11) eap_peap: Setting User-Name to ajr_at_macbook (11) eap_peap: Sending tunneled request to inner-tunnel (11) eap_peap: EAP-Message = 0x020a00061a03 (11) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_peap: User-Name = "ajr_at_macbook" (11) eap_peap: State = 0x287be8ee2971f24656459491fa7b8c64 (11) Virtual server inner-tunnel received request (11) EAP-Message = 0x020a00061a03 (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) User-Name = "ajr_at_macbook" (11) State = 0x287be8ee2971f24656459491fa7b8c64 (11) WARNING: Outer and inner identities are the same. User privacy is compromised. (11) server inner-tunnel { (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [chap] = noop (11) [mschap] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) update control { (11) &Proxy-To-Realm := LOCAL (11) } # update control = noop (11) eap: Peer sent EAP Response (code 2) ID 10 length 6 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) files: users: Matched entry ajr_at_macbook at line 30 (11) [files] = ok (11) [expiration] = noop (11) [logintime] = noop (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) } # authorize = updated (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (11) authenticate { (11) eap: Expiring EAP session with state 0x287be8ee2971f246 (11) eap: Finished EAP session with state 0x287be8ee2971f246 (11) eap: Previous EAP request found for state 0x287be8ee2971f246, released from the list (11) eap: Peer sent packet with method EAP MSCHAPv2 (26) (11) eap: Calling submodule eap_mschapv2 to process data (11) eap: Sending EAP Success (code 3) ID 10 length 4 (11) eap: Freeing handler (11) [eap] = ok (11) } # authenticate = ok (11) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (11) post-auth { (11) if (0) { (11) if (0) -> FALSE (11) } # post-auth = noop (11) } # server inner-tunnel (11) Virtual server sending reply (11) Tunnel-Type = VLAN (11) Tunnel-Medium-Type = IEEE-802 (11) Mikrotik-Wireless-VLANID = 13 (11) Mikrotik-Wireless-VLANID-Type = 0 (11) Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (11) MS-MPPE-Encryption-Policy = Encryption-Allowed (11) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) MS-MPPE-Send-Key = 0x82c6f586efcad91f1d506585e0b7d412 (11) MS-MPPE-Recv-Key = 0x0f1dd32e5087e73c1979b7f28c046075 (11) EAP-Message = 0x030a0004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "ajr_at_macbook" (11) eap_peap: Got tunneled reply code 2 (11) eap_peap: Tunnel-Type = VLAN (11) eap_peap: Tunnel-Medium-Type = IEEE-802 (11) eap_peap: Mikrotik-Wireless-VLANID = 13 (11) eap_peap: Mikrotik-Wireless-VLANID-Type = 0 (11) eap_peap: Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (11) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (11) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) eap_peap: MS-MPPE-Send-Key = 0x82c6f586efcad91f1d506585e0b7d412 (11) eap_peap: MS-MPPE-Recv-Key = 0x0f1dd32e5087e73c1979b7f28c046075 (11) eap_peap: EAP-Message = 0x030a0004 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: User-Name = "ajr_at_macbook" (11) eap_peap: Got tunneled reply RADIUS code 2 (11) eap_peap: Tunnel-Type = VLAN (11) eap_peap: Tunnel-Medium-Type = IEEE-802 (11) eap_peap: Mikrotik-Wireless-VLANID = 13 (11) eap_peap: Mikrotik-Wireless-VLANID-Type = 0 (11) eap_peap: Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (11) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (11) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) eap_peap: MS-MPPE-Send-Key = 0x82c6f586efcad91f1d506585e0b7d412 (11) eap_peap: MS-MPPE-Recv-Key = 0x0f1dd32e5087e73c1979b7f28c046075 (11) eap_peap: EAP-Message = 0x030a0004 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: User-Name = "ajr_at_macbook" (11) eap_peap: Tunneled authentication was successful (11) eap_peap: SUCCESS (11) eap_peap: Saving tunneled attributes for later (11) eap: Sending EAP Request (code 1) ID 11 length 46 (11) eap: EAP session adding &reply:State = 0x5ccd2a9156c6335e (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) session-state: Saving cached attributes (11) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) TLS-Session-Version = "TLS 1.2" (11) Sent Access-Challenge Id 173 from 172.16.63.9:1812 to 172.16.63.11:57477 length 0 (11) EAP-Message = 0x010b002e190017030300230000000000000004d9a7c123f3a2f6478f84b6f61cf982158d58b583a603eff1d88610 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0x5ccd2a9156c6335e8c2e845aad07e421 (11) Finished request Waking up in 4.6 seconds. (12) Received Access-Request Id 174 from 172.16.63.11:43616 to 172.16.63.9:1812 length 223 (12) Service-Type = Framed-User (12) Framed-MTU = 1400 (12) User-Name = "ajr_at_macbook" (12) State = 0x5ccd2a9156c6335e8c2e845aad07e421 (12) NAS-Port-Id = "cap02_2" (12) NAS-Port-Type = Wireless-802.11 (12) Acct-Session-Id = "8240030c" (12) Calling-Station-Id = "F8-1E-DF-E8-F6-A5" (12) Called-Station-Id = "C4-AD-34-F5-4D-1E" (12) EAP-Message = 0x020b002e19001703030023ebaeed68d0719767b2dcfa8289533dd316b36f354a3638797939d0c8fbc695a6b20bf6 (12) Message-Authenticator = 0xf698daeecdbfd9523a00fb6d705813b8 (12) NAS-Identifier = "cap01.wlan.chaos1.de" (12) NAS-IP-Address = 172.16.63.11 (12) Restoring &session-state (12) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (12) &session-state:TLS-Session-Version = "TLS 1.2" (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "ajr_at_macbook", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 11 length 46 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/raddb/sites-enabled/default (12) authenticate { (12) eap: Expiring EAP session with state 0x5ccd2a9156c6335e (12) eap: Finished EAP session with state 0x5ccd2a9156c6335e (12) eap: Previous EAP request found for state 0x5ccd2a9156c6335e, released from the list (12) eap: Peer sent packet with method EAP PEAP (25) (12) eap: Calling submodule eap_peap to process data (12) eap_peap: Continuing EAP-TLS (12) eap_peap: [eaptls verify] = ok (12) eap_peap: Done initial handshake (12) eap_peap: [eaptls process] = ok (12) eap_peap: Session established. Decoding tunneled attributes (12) eap_peap: PEAP state send tlv success (12) eap_peap: Received EAP-TLV response (12) eap_peap: Success (12) eap_peap: Using saved attributes from the original Access-Accept (12) eap_peap: Tunnel-Type = VLAN (12) eap_peap: Tunnel-Medium-Type = IEEE-802 (12) eap_peap: Mikrotik-Wireless-VLANID = 13 (12) eap_peap: Mikrotik-Wireless-VLANID-Type = 0 (12) eap_peap: Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (12) eap_peap: User-Name = "ajr_at_macbook" (12) eap: Sending EAP Success (code 3) ID 11 length 4 (12) eap: Freeing handler (12) [eap] = ok (12) } # authenticate = ok (12) # Executing section post-auth from file /etc/raddb/sites-enabled/default (12) post-auth { (12) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (12) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (12) update { (12) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (12) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (12) } # update = noop (12) [exec] = noop (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) } # post-auth = noop (12) Sent Access-Accept Id 174 from 172.16.63.9:1812 to 172.16.63.11:43616 length 0 (12) Tunnel-Type = VLAN (12) Tunnel-Medium-Type = IEEE-802 (12) Mikrotik-Wireless-VLANID = 13 (12) Mikrotik-Wireless-VLANID-Type = 0 (12) Mikrotik-Wireless-Comment = "Axel Rau @ MacBook" (12) User-Name = "ajr_at_macbook" (12) MS-MPPE-Recv-Key = 0xf6831ed3156b2faeac7d3335b228b44f75487a7a0698e8cce62be1540919de55 (12) MS-MPPE-Send-Key = 0x444f74272814bacbdffe942a8300b1ab673db545865680a45b08560c74704edf (12) EAP-Message = 0x030b0004 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) Finished request Waking up in 4.6 seconds. (0) Cleaning up request packet ID 162 with timestamp +80 (1) Cleaning up request packet ID 163 with timestamp +80 (2) Cleaning up request packet ID 164 with timestamp +80 (3) Cleaning up request packet ID 165 with timestamp +80 (4) Cleaning up request packet ID 166 with timestamp +80 (5) Cleaning up request packet ID 167 with timestamp +80 (6) Cleaning up request packet ID 168 with timestamp +80 (7) Cleaning up request packet ID 169 with timestamp +80 (8) Cleaning up request packet ID 170 with timestamp +80 (9) Cleaning up request packet ID 171 with timestamp +80 (10) Cleaning up request packet ID 172 with timestamp +80 (11) Cleaning up request packet ID 173 with timestamp +80 (12) Cleaning up request packet ID 174 with timestamp +80 Ready to process requests --- PGP-Key: CDE74120 ☀ computing @ chaos claudius

2 3

Radius authorization
by Bidisha Mandal 01 Dec '20

01 Dec '20

Hi, How to setup Radius for authorization of a client? I'm able to authenticate the client but where do I need to configure authorization assigned to a user . Thanks & regards, Bidisha Mandal Staff No : 5630 Research Engineer Fault Tolerance Group C-Dot, New Delhi

1 0