March 2020 - Freeradius-Users - lists.freeradius.org

3.0.21 installed from source fails to parse /mods-config/files/authorize?
by Gleb Lisikh 16 Mar '20

16 Mar '20

Installed 3.0.21 from source on Ubuntu18 (from scratch) and on CentOS7 (over previous working 3.0.20 instance), and in both cases got the following when doing the "Initial Test" radtest testing password 127.0.0.1 0 testing123 as per https://wiki.freeradius.org/guide/Getting-Started (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject radiusd -X seems to have launched OK. What's wrong? T^hank you!

2 1

FR 3.0 radsec : dynamic home server discovery status
by Arnaud LAURIOU 13 Mar '20

13 Mar '20

Hello, We are upgrading our federation eduroam servers to Radius over tcp. Regarding the dynamic home server discovery feature through naptr record, is it available in FR 3.0 ? I don't think so, but I'm not sure. Regards, Arnaud Lauriou

9 24

FW: OCSP Error: "Couldn't get issuer_cert" with EAP-TLS
by Barry Hesk 13 Mar '20

13 Mar '20

Hi Be really grateful for some assistance in this setup: 1. FreeRadius 3.0.16 running on Ubuntu 18.04 LTS 2. I have enabled EAP-TLS and have this working. The certificates (CA, Server, Client) have been created and imported from Microsoft CA server. 3. I have copied the CA certificate to /etc/freeradius/3.0/certs/root.pem and the server certificate / private key to /etc/freeradius/3.0/certs/radcert.pem 4. My eap module config looks like: tls-config tls-common { private_key_password = <password> private_key_file = /etc/freeradius/3.0/certs/radcert.pem certificate_file = /etc/freeradius/3.0/certs/radcert.pem ca_file = /etc/freeradius/3.0/certs/root.pem dh_file = ${certdir}/dh ca_path = ${cadir} cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" ocsp { enable = yes override_cert_url = yes". url = "http://<IP address>/ocsp<http://%3cIP%20address%3e/ocsp>" timeout = 0 } } Without OCSP enabled, everything works. I can authenticate from a Wireless Access Point using a client certificate and EAP-TLS. I have configured OCSP in my Microsoft PKI environment and confirmed it works using the inbuilt Microsoft tools and OCSP Responder. I can use the URL listed above "http://<IP address>/ocsp<http://%3cIP%20address%3e/ocsp>" to check the certificate validity outside of FreeRadius. When I enable OSCP on FreeRadius, I receive an error message on client authentication "Could not get issuer_cert". FreeRADIUS doesn't attempt to query the OCSP URL (confirmed by packet capture). I have run FreeRadius in debug mode, where I see the message. "BARRYE540.intrinsic-comms.co.uk" is the CN of the client side certificate. "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" is my CA. This is the certificate in the file /etc/freeradius/3.0/certs/root.pem This CA signed both my server certificate, and also the client certificate. (6) authenticate { (6) eap: Expiring EAP session with state 0xbe16c925bb1ec429 (6) eap: Finished EAP session with state 0xbe16c925bb1ec429 (6) eap: Previous EAP request found for state 0xbe16c925bb1ec429, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Got final TLS record fragment (430 bytes) (6) eap_tls: [eaptls verify] = ok (6) eap_tls: Done initial handshake (6) eap_tls: TLS_accept: SSLv3/TLS write server done (6) eap_tls: <<< recv TLS 1.0 Handshake [length 05ec], Certificate (6) eap_tls: Creating attributes from certificate OIDs (6) eap_tls: TLS-Cert-Serial := "65af3f02a6ec65a44c0e7514e4264d26" (6) eap_tls: TLS-Cert-Expiration := "210606133907Z" (6) eap_tls: TLS-Cert-Subject := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Cert-Issuer := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Cert-Common-Name := "intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: Creating attributes from certificate OIDs (6) eap_tls: TLS-Client-Cert-Serial := "61ab3a63000000000024" (6) eap_tls: TLS-Client-Cert-Expiration := "210311124806Z" (6) eap_tls: TLS-Client-Cert-Subject := "/CN=BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-Issuer := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Client-Cert-Common-Name := "BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-Subject-Alt-Name-Dns := "BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication, TLS Web Server Authentication" (6) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "92:B0:76:E0:FF:A4:21:CA:90:86:5D:ED:30:95:76:ED:1B:39:7C:3C" (6) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:6E:8C:54:CC:71:53:48:A7:7B:C7:56:CA:9F:BA:B2:00:D0:D0:B0:4D\n" (6) eap_tls: Starting OCSP Request (6) eap_tls: ERROR: Couldn't get issuer_cert for BARRYE540.intrinsic-comms.co.uk (6) eap_tls: TLS_accept: SSLv3/TLS read client certificate (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (6) eap_tls: TLS_accept: SSLv3/TLS read client key exchange (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0106], CertificateVerify (6) eap_tls: TLS_accept: SSLv3/TLS read certificate verify (6) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0010], Finished (6) eap_tls: TLS_accept: SSLv3/TLS read finished (6) eap_tls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (6) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec (6) eap_tls: >>> send TLS 1.0 Handshake [length 0010], Finished (6) eap_tls: TLS_accept: SSLv3/TLS write finished (6) eap_tls: (other): SSL negotiation finished successfully (6) eap_tls: SSL Connection Established (6) eap_tls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 9 length 69 (6) eap: EAP session adding &reply:State = 0xbe16c925b81fc429 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 56 from 10.1.201.131:1812 to 10.1.200.5:1645 length 0 (6) EAP-Message = 0x010900450d800000003b14030100010116030100300d1b86144514486ac8365c982b727cc67cc948850c735a28a07e93f2 b24bf4b0858e5ac5677c48fbcb1293e30098f482 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xbe16c925b81fc4295f491b5eb49b13aa (6) Finished request If there are any other further debugs or outputs that would assist, please let me know. Thanks.

2 4

Framed-IP-Address Help
by Aurélio de Souza Ribeiro Neto 13 Mar '20

13 Mar '20

Hello Everyone, I need help. In my default configuration file I did this change in authenticate session: Auth-Type mschap { mschap { reject = 1 } if(reject) { update control { Pool-Name := "mkt_pool" } update reply { Mikrotik-Rate-Limit := "2M/2M" } ok } } This change is for give an IP from another POOL if the user is with invalid credentials. All works fine if the IP comes from DHCP, but if the user have a fixed IP then the IP is not changed. How can I remove the fixed IP to force the user to receive an IP from pool that I choose? Thanks Aurelio

3 10

Re: Python "import" statement fails for any module in /site-packages/ when run by radiusd from example.py
by Jorge Pereira 12 Mar '20

12 Mar '20

> On 12 Mar 2020, at 15:21, Gleb Lisikh <in4bit.general(a)gmail.com> wrote: > > Thanks Jorge! > > Thank you so much for your prompt response!! > > FreeRADIUS Version 3.0.20 > Python version: 2.7.5 (default, Dec 4 2019, 17:34:13) [GCC 4.8.5 20150623 (Red Hat 4.8.5-39.0.1)] > > Are you saying that what I described is a known problem/bug, and that 3.0.21 deals with it? Any references that would detail this? > It was fixed as can be seen in https://github.com/FreeRADIUS/freeradius-server/pull/3184 <https://github.com/FreeRADIUS/freeradius-server/pull/3184> > Thank you again! > > Gleb > > > > On Thu, Mar 12, 2020 at 2:06 PM Jorge Pereira <jpereira(a)freeradius.org <mailto:jpereira@freeradius.org>> wrote: > Hi, > > Which version are you running? Because it was fixed a few months ago and It only will be available on next 3.0.21. But, you could build your own version from the latest code base in https://github.com/FreeRADIUS/freeradius-server/commits/v3.0.x <https://github.com/FreeRADIUS/freeradius-server/commits/v3.0.x> and see if your tests will work fine. > > --- > Jorge Pereira > jpereira(a)freeradius.org <mailto:jpereira@freeradius.org> > > > > >> On 12 Mar 2020, at 14:58, Gleb Lisikh <in4bit.general(a)gmail.com <mailto:in4bit.general@gmail.com>> wrote: >> >> Before I go into exact code, paths, version etc. any general advice or >> troubleshooting steps for figuring out why python import statement fails to >> execute for any python library I try to call for >> from /etc/raddb/mods-config/python/example.py? >> >> - example.py runs fine for other python statements >> - I can do "import sys" and it works fine, but sys is a built in python >> module >> - I can execute "import" for any python module defined >> under /usr/lib/python2.7/site-packages/ in python environment under radiusd >> users (e.g. sudo -u radiusd python) >> >> I am very amateur when it comes to linuz, so please bear with me... >> >> Thank you! >> >> Gleb Lisikh >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html <http://www.freeradius.org/list/users.html>

1 0

Python "import" statement fails for any module in /site-packages/ when run by radiusd from example.py
by Gleb Lisikh 12 Mar '20

12 Mar '20

Before I go into exact code, paths, version etc. any general advice or troubleshooting steps for figuring out why python import statement fails to execute for any python library I try to call for from /etc/raddb/mods-config/python/example.py? - example.py runs fine for other python statements - I can do "import sys" and it works fine, but sys is a built in python module - I can execute "import" for any python module defined under /usr/lib/python2.7/site-packages/ in python environment under radiusd users (e.g. sudo -u radiusd python) I am very amateur when it comes to linuz, so please bear with me... Thank you! Gleb Lisikh

2 1

sql read_clients not binding/working properly with multiple virtual servers.
by Enrico Zanolin 12 Mar '20

12 Mar '20

I'm running Freeradius 3.0.17 on Debian. With 3 virtual servers 2 of which reference the sql module. Everything works perfectly fine if I leave the server field in the nas table NULL. This however seems to mean that the clients/nas config is shared among all the servers. When I try to specify a server name in the server field the config seems to load fine and match the configured virtual server *rlm_sql (sql-vpn): Adding client 10.0.0.0/24 <http://10.0.0.0/24> (hosted-range) to test clients list* But when I try to send RADIUS requests to the server it does not work *Ignoring request to auth address * port 2012 bound to server spcenter-vpn from unknown client 10.0.0.126 port 54022 proto udp* I also confirmed the client list using radmin and "show client list" and 10.0.0.0/24 is in the list but it does not show if it's "bound" to any virtual instance. Thank you. Below is my nas table (I changed the name to rad_nas) and my freeradius debug output ------ SNIP ------ MariaDB [spcenter]> select * from rad_nas; +----+-----------------+--------------+-------+-------+----------+--------------+-----------+---------------+ | id | nasname | shortname | type | ports | secret | server | community | description | +----+-----------------+--------------+-------+-------+----------+--------------+-----------+---------------+ | 1 | 10.0.0.0/24 | hosted-range | other | NULL | spcenter | spcenter-vpn | NULL | RADIUS Client | +----+-----------------+--------------+-------+-------+----------+--------------+-----------+---------------+ 1 row in set (0.00 sec) # /etc/init.d/freeradius stop;freeradius -X [ ok ] Stopping freeradius (via systemctl): freeradius.service. FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/sql-ppp including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sql-vpn including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/perl-ppp including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/perl-vpn including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/perl-login including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/spcenter-ppp including configuration file /etc/freeradius/3.0/sites-enabled/control-socket including configuration file /etc/freeradius/3.0/sites-enabled/spcenter-vpn including configuration file /etc/freeradius/3.0/sites-enabled/spcenter-login main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_sql # Loading module "sql-ppp" from file /etc/freeradius/3.0/mods-enabled/sql-ppp sql sql-ppp { driver = "rlm_sql_mysql" server = "localhost" port = 0 login = "spcenter" password = <<< secret >>> radius_db = "spcenter" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM rad_nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql-ppp-SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql-ppp-SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM rad_acct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM rad_acct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE rad_acct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE rad_acct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO rad_acct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_startconnectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE rad_acct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE rad_acct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql-ppp): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute sql-ppp-SQL-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "sql-vpn" from file /etc/freeradius/3.0/mods-enabled/sql-vpn sql sql-vpn { driver = "rlm_sql_mysql" server = "localhost" port = 0 login = "spcenter" password = <<< secret >>> radius_db = "spcenter" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM rad_nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql-vpn-SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql-vpn-SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM rad_acct_vpn WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM rad_acct_vpn WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE rad_acct_vpn SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE rad_acct_vpn SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO rad_acct_vpn (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_startconnectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE rad_acct_vpn SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE rad_acct_vpn SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql-vpn): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute sql-vpn-SQL-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_perl # Loading module "perl-ppp" from file /etc/freeradius/3.0/mods-enabled/perl-ppp perl perl-ppp { filename = "/opt/spcenter/bin/radius-plugin/dialup/plugin.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_post_auth = "post_auth" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "perl-vpn" from file /etc/freeradius/3.0/mods-enabled/perl-vpn perl perl-vpn { filename = "/opt/spcenter/bin/radius-plugin/vpn/plugin.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_post_auth = "post_auth" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "perl-login" from file /etc/freeradius/3.0/mods-enabled/perl-login perl perl-login { filename = "/opt/spcenter/bin/radius-plugin/admin/plugin.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_post_auth = "post_auth" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "sql-ppp" from file /etc/freeradius/3.0/mods-enabled/sql-ppp rlm_sql_mysql: libmysql version: 10.3.22 mysql { tls { } warnings = "auto" } rlm_sql (sql-ppp): Attempting to connect to database "spcenter" rlm_sql (sql-ppp): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql-ppp): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-ppp): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-ppp): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-ppp): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-ppp): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "sql-vpn" from file /etc/freeradius/3.0/mods-enabled/sql-vpn mysql { tls { } warnings = "auto" } rlm_sql (sql-vpn): Attempting to connect to database "spcenter" rlm_sql (sql-vpn): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql-vpn): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-vpn): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-vpn): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-vpn): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-vpn): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql-vpn): Processing generate_sql_clients rlm_sql (sql-vpn) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM rad_nas rlm_sql (sql-vpn): Reserved connection (0) rlm_sql (sql-vpn): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM rad_nas rlm_sql (sql-vpn): Adding client 10.0.0.0/24 (hosted-range) to spcenter-vpn clients list rlm_sql (10.0.0.0): Client "hosted-range" (sql-vpn) added rlm_sql (sql-vpn): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql-vpn): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'spcenter' on Localhost via UNIX socket, server version 10.1.44-MariaDB-0+deb9u1, protocol version 10 # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "perl-ppp" from file /etc/freeradius/3.0/mods-enabled/perl-ppp # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "perl-vpn" from file /etc/freeradius/3.0/mods-enabled/perl-vpn # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "perl-login" from file /etc/freeradius/3.0/mods-enabled/perl-login # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server spcenter-ppp { # from file /etc/freeradius/3.0/sites-enabled/spcenter-ppp # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server spcenter-ppp server spcenter-vpn { # from file /etc/freeradius/3.0/sites-enabled/spcenter-vpn # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server spcenter-vpn server spcenter-login { # from file /etc/freeradius/3.0/sites-enabled/spcenter-login # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server spcenter-login radiusd: #### Opening IP addresses and Ports #### listen { type = "control" listen { socket = "/var/run/freeradius/freeradius.sock" mode = "rw" peercred = yes } } listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } listen { type = "auth" ipaddr = * port = 2012 } listen { type = "acct" ipaddr = * port = 2013 } listen { type = "auth" ipaddr = * port = 1912 } listen { type = "acct" ipaddr = * port = 1913 } Listening on command file /var/run/freeradius/freeradius.sock Listening on auth address * port 1812 bound to server spcenter-ppp Listening on acct address * port 1813 bound to server spcenter-ppp Listening on auth address * port 2012 bound to server spcenter-vpn Listening on acct address * port 2013 bound to server spcenter-vpn Listening on auth address * port 1912 bound to server spcenter-login Listening on acct address * port 1913 bound to server spcenter-login Listening on proxy address * port 39556 Ready to process requests Ignoring request to auth address * port 2012 bound to server spcenter-vpn from unknown client 10.0.0.126 port 54022 proto udp Ready to process requests ------ SNIP ------

2 4

Error 2FA - AD password and external OTP via RADIUS proxy
by Клеусов Владимир Сергеевич 11 Mar '20

11 Mar '20

Hi I configure at https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy But there was an error /etc/freeradius/3.0/sites-enabled/proxy[2]: Invalid location for 'if' Any ideas FreeRADIUS Version 3.0.1

4 5

DHCP configuration using freeradius
by kabin mool 10 Mar '20

10 Mar '20

Hi, Recently, I started using freeradius for my home WiFi and i wanted to configuration freeradius to provide DHCP service. Can any one help me on this. kabin

3 11

Freeradius with google authenticator gives error - No "known good" password found for the use
by prasanna 10 Mar '20

10 Mar '20

Hi, I am new to freeradius and after going through docs and user faq I was not able to solve this issue after multiple checks in my config. freeradius version is 3.0.13 I am using Linux ( from Amazon AWS HVM2 64 bit ) and using the EC2 box My VPC CIDR range (or client machines are ) : 10.0.0.0/16 I used the scripts below to install yum install -y freeradius freeradius-utils google-authenticator sssd httpd sed -i.bak -e 's/user = radiusd/user = root/' -e 's/group = radiusd/group = root/' /etc/raddb/radiusd.conf sed -i.bak -e "s/^#\tpam/\tpam/" /etc/raddb/sites-available/default yum install https:// dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y yum install google-authenticator -y Configurations made were as following I have modified /etc/raddb/clients.config to accept ip ranges from my CIDR client vpc_clients { ipaddr = 10.0.0.0/16 secret = testing12345 } Enabled PAM in file/etc/sites-available/default by removing the '#' pam comment Enabled PAM as default authentication type in /etc/raddb/users by removing comment on DEFAULT Group and adding DEFAULT Auth-Type := PAM line DEFAULT Group == "disabled", Auth-Type := Reject Reply-Message = "Your account has been disabled." DEFAULT Auth-Type := PAM Also changed the /etc/pam.d/radiusd for PAM integration auth requisite pam_google_authenticator.so account required pam_permit.so session required pam_permit.so Enabled PAM module ln -s /etc/raddb/mods-available/pam /etc/raddb/mods-enabled/pam The test was ok (Accept-request) when a local user like 'bob' was added to raduser file without PAM. So as next step I added testuser for google-autheticator as below sudo useradd -g radius-users testuser sudo -u testuser google-authenticator I tried the command radtest testuser <PIN from googleauthenticator> 10.0.24.144:1812 10 testing12345 I get following error No "known good" password found for the use. I rechecked the configs and authenticator PAM is enabled but the failure happens earlier. Please let me know how I could move ahead or where I should check next ? Debug Message : 2) Received Access-Request Id 4 from 10.0.24.144:60632 to 10.0.0.209:1812 length 72 (2) NAS-IP-Address = 10.0.24.144 (2) User-Name = "testuser" (2) User-Password = "81625808" (2) Message-Authenticator = 0xa15c37032939718e521cb83a03b31e74 (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "testuser", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: No EAP-Message, not doing EAP (2) [eap] = noop (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (2) pap: WARNING: Authentication will fail unless a "known good" password is available (2) [pap] = noop (2) } # authorize = ok (2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> testuser (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) [eap] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # Post-Auth-Type REJECT = updated (2) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 4 from 10.0.0.209:1812 to 10.0.24.144:60632 length 20 Waking up in 3.9 seconds. (2) Cleaning up request packet ID 4 with timestamp +84 Ready to process requests (3) Received Access-Request Id 5 from 10.0.24.144:51706 to 10.0.0.209:1812 length 72 (3) NAS-IP-Address = 10.0.24.144 (3) User-Name = "testuser" (3) User-Password = "81625808" (3) Message-Authenticator = 0x315376d568418fcf0cbbd174d5c7826f (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "testuser", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: No EAP-Message, not doing EAP (3) [eap] = noop (3) [files] = noop (3) [expiration] = noop (3) [logintime] = noop (3) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (3) pap: WARNING: Authentication will fail unless a "known good" password is available (3) [pap] = noop (3) } # authorize = ok (3) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> testuser (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 5 from 10.0.0.209:1812 to 10.0.24.144:51706 length 20 Waking up in 3.9 seconds. (3) Cleaning up request packet ID 5 with timestamp +553 Ready to process requests

2 3

mssql-freetds interim-update problem
by Ali Arslan 09 Mar '20

09 Mar '20

Hello all, I am using freeradius 3.0.16 on 2 ubuntu 18.04 servers. One is using mysql the other mssql server as backends. The radius server using mysql is working properly but the one that is using mssql with freetds inserts new rows in radacct table for interim updates. The debug output parts for interim update are as follows: radius server 1 (using mysql): --------------------------------------- (5) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (5) sql: --> type.interim-update.query (5) sql: Using query template 'query' rlm_sql (sql): Reserved connection (7) (5) sql: EXPAND %{User-Name} (5) sql: --> b48@selcuklu (5) sql: SQL-User-Name set to 'b48@selcuklu' (5) sql: EXPAND UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), acctstoptime = NULL, framedipaddress = '%{Framed-IP-Address}', ipinternalport = %{%{IP-Port-Int-Port}:-NULL}, internalipaddress = %{%{IP-Port-Int-IPv4-Addr}:-NULL}, ipexternalport = %{%{IP-Port-Ext-Port}:-NULL}, externalipaddress = %{%{IP-Port-Ext-IPv4-Addr}:-NULL}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (5) sql: --> UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(1583672931), acctinterval = 1583672931 - UNIX_TIMESTAMP(@acctupdatetime_old), acctstoptime = NULL, framedipaddress = '192.168.12.251', ipinternalport = NULL, internalipaddress = NULL, ipexternalport = NULL, externalipaddress = NULL, acctsessiontime = 198600, acctinputoctets = '0' << 32 | '214152128', acctoutputoctets = '0' << 32 | '418687860' WHERE AcctUniqueId = '5d7426d2c93ad7b53a9ff6801d14f201' (5) sql: Executing query: UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(1583672931), acctinterval = 1583672931 - UNIX_TIMESTAMP(@acctupdatetime_old), acctstoptime = NULL, framedipaddress = '192.168.12.251', ipinternalport = NULL, internalipaddress = NULL, ipexternalport = NULL, externalipaddress = NULL, acctsessiontime = 198600, acctinputoctets = '0' << 32 | '214152128', acctoutputoctets = '0' << 32 | '418687860' WHERE AcctUniqueId = '5d7426d2c93ad7b53a9ff6801d14f201' rlm_sql_mysql: Rows matched: 1 Changed: 1 Warnings: 1 (5) sql: SQL query returned: success (5) sql: 1 record(s) updated rlm_sql (sql): Released connection (7) Need 1 more connections to reach 10 spares ---------------------------------------------------------------------------------------------------------------------------------------- radius server 2 (using mssql): ---------------------------------------- (3) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (3) sql: --> type.interim-update.query (3) sql: Using query template 'query' rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 120 seconds rlm_sql_freetds: socket destructor called, closing socket rlm_sql (sql): Reserved connection (1) (3) sql: EXPAND %{User-Name} (3) sql: --> test@orbit (3) sql: SQL-User-Name set to 'test@orbit' (3) sql: EXPAND UPDATE radacct SET AcctUpdateTime = '%S', AcctStopTime = NULL, FramedIPAddress = '%{Framed-IP-Address}', FramedIPv6Address = '%{Framed-IPv6-Address}', FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', FramedInterfaceId = '%{Framed-Interface-Id}', DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}', AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (3) sql: --> UPDATE radacct SET AcctUpdateTime = '2020-03-08 16:07:09', AcctStopTime = NULL, FramedIPAddress = '192.168.10.255', FramedIPv6Address = '', FramedIPv6Prefix = '', FramedInterfaceId = '', DelegatedIPv6Prefix = '', AcctSessionTime = 600, AcctInputOctets = convert(bigint, '0' * POWER(2.0, 32)) | '407068', AcctOutputOctets = convert(bigint, '0' * POWER(2.0, 32)) | '687067' WHERE AcctUniqueId = '72029846d9c951718be3d5e42432e88f' (3) sql: Executing query: UPDATE radacct SET AcctUpdateTime = '2020-03-08 16:07:09', AcctStopTime = NULL, FramedIPAddress = '192.168.10.255', FramedIPv6Address = '', FramedIPv6Prefix = '', FramedInterfaceId = '', DelegatedIPv6Prefix = '', AcctSessionTime = 600, AcctInputOctets = convert(bigint, '0' * POWER(2.0, 32)) | '407068', AcctOutputOctets = convert(bigint, '0' * POWER(2.0, 32)) | '687067' WHERE AcctUniqueId = '72029846d9c951718be3d5e42432e88f' (3) sql: SQL query returned: success (3) sql: -1 record(s) updated ******************** here it tries next query and inserts new row ********************** (3) sql: Trying next query... (3) sql: EXPAND INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfoStart, ConnectInfoStop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId, DelegatedIPv6Prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-Id}:-%{NAS-Port}}', '%{NAS-Port-Type}', DATEADD(second, -1 * (%{%{Acct-Session-Time}:-0}),'%S'), '%S', NULL, %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '%{Connect-Info}', '', convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}') (3) sql: --> INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfoStart, ConnectInfoStop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId, DelegatedIPv6Prefix) VALUES ('81a00005', '72029846d9c951718be3d5e42432e88f', 'test@orbit', '', '192.168.1.200', 'LAN', 'Ethernet', DATEADD(second, -1 * (600),'2020-03-08 16:07:09'), '2020-03-08 16:07:09', NULL, 600, 'RADIUS', '', '', convert(bigint, '0' * POWER(2.0, 32)) | '407068', convert(bigint, '0' * POWER(2.0, 32)) | '687067', 'PPPoE', 'D8:C4:97:15:C1:F8', '', 'Framed-User', 'PPP', '192.168.10.255', '', '', '', '') (3) sql: Executing query: INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfoStart, ConnectInfoStop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId, DelegatedIPv6Prefix) VALUES ('81a00005', '72029846d9c951718be3d5e42432e88f', 'test@orbit', '', '192.168.1.200', 'LAN', 'Ethernet', DATEADD(second, -1 * (600),'2020-03-08 16:07:09'), '2020-03-08 16:07:09', NULL, 600, 'RADIUS', '', '', convert(bigint, '0' * POWER(2.0, 32)) | '407068', convert(bigint, '0' * POWER(2.0, 32)) | '687067', 'PPPoE', 'D8:C4:97:15:C1:F8', '', 'Framed-User', 'PPP', '192.168.10.255', '', '', '', '') (3) sql: SQL query returned: success (3) sql: -1 record(s) updated (3) sql: No additional queries configured rlm_sql (sql): Released connection (1) The attached file shows mssql queries.conf file accounting section. sql configuration for mssql is as follows: sql { driver = "rlm_sql_freetds" dialect = "mssql" server = "SQLServer" # configured in /etc/freetds/freetds.conf file port = 1433 login = ***** password = ****** radius_db = "database_name" *** table mappings *** pool { """" default **** } delete_stale_sessions = yes read_clients = yes client_table = "nas" ... } Why it inserts a new row in interim-update after updating record? Thanks.

2 1

Re: Failed in SSLv3 read client certificate A
by Al S 08 Mar '20

08 Mar '20

I had wifi-authentication failures going on recently. My Apple TV box is set up to use EAP-TLS to authenticate against the network, and was failing to connect. [SOLVED] It turned out that it didn't have a clue about what the local time was, as it was unable to connect to the network to find out, and because it was unable to get the local time, it either believed that the some part of the EAP response had an invalid timestamp or maybe that it felt that some certificate involved along the way was not valid. The solution was to connect it to an ethernet port, wait a couple of minutes for the time to sync, and then remove the ethernet cable. Maybe this nugget helps someone else in this situation. Regards, Al.

1 0

core dumps not working on FreeBSD host
by Marek Zarychta 04 Mar '20

04 Mar '20

Dear list, since upgrade from 3.0.19 to 3.0.20 I am occasionally getting errors like this one: pid 23749 (radiusd), jid 1, uid 133: exited on signal 11 This issue is somehow related to network / connectivity problems and looks like quite a new problem (I have not seen this in 3.0.19 and earlier releases). It can't be easily triggered, so I am searching for the culprit. To find it I have tried to enable core dumps on FreeBSD for radiusd but without success. I have set allow_core_dumps = yes in radiusd.conf file. Also these sysctls are set: kern.sugid_coredump=1 kern.coredump=1 kern.corefile=/tmp/%N.%P.core There is no problem with getting core dumps for other daemons running on this host, also those running with suid/sgid enabled like bind or nsd, so the issue looks more like daemon related problem than OS problem. Any help would be greatly appreciated! -- Marek Zarychta

3 6

ios forget password from ldap
by Сергей Черевко 04 Mar '20

04 Mar '20

Hi! What you say about iOS devices with freeradius and unifi? Many people in our office saying their iOS devices forgot password from ldap account and every week (or few days) they write again and again their passwоrds to connect to the network (which is saved on they devices and must remeber credentials and automaticly connect as soon as they walk in office) Unifi — freeradius — ldap i use ttls+pap who guilty in this case?

2 1

FR 3.0.20 running with -f on Debian 8.11
by Martin Pauly 04 Mar '20

04 Mar '20

Hi, hope I haven't missed any docs, but: I have a productive installation of FR 3.0.17 running on Debian 8.11. Before migrating this to Debian 10, I wanted to upgrade it to 3.0.20. It compiled fine from the source, and the server is working. But there seems to be some trouble, as the process shows up as USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND freerad 56763 1.6 11.4 622300 116336 ? Ssl 15:58 0:01 /usr/sbin/freeradius -f Attached is debug, but you don't fork in debug mode ... Any idea? TIA, Martin -- Dr. Martin Pauly Phone: +49-6421-28-23527 HRZ Univ. Marburg Fax: +49-6421-28-26994 Hans-Meerwein-Str. E-Mail: pauly(a)HRZ.Uni-Marburg.DE D-35032 Marburg

3 4

rpmbuild of freeradius 3.0.20 with oracle support get mi error Installed (but unpackaged) file(s) found
by Bogaczewicz Paweł 03 Mar '20

03 Mar '20

I am trying to build freeradius rpm on oracle linux 7. oracle linux has all updates. i get the latest stable version of freeradius - freeradius-server-3.0.20.tar.bz2. it compiles good, unless i add --with rlm_sql_oracle to command, i.e. rpmbuild -ba SPECS/freeradius.spec --with rlm_sql_oracle --without rlm_sql_mysql then i get Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64 error: Installed (but unpackaged) file(s) found: /usr/lib64/freeradius/rlm_sqlhpwippool.so RPM build errors: Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/users Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/sites-enabled/default Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/sites-enabled/inner-tunnel Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/always Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/attr_filter Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/cache_eap Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/chap Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/date Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/detail Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/detail.log Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/digest Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/dynamic_clients Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/eap Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/echo Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/exec Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/expiration Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/expr Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/files Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/linelog Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/logintime Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/mschap Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/ntlm_auth Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/pap Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/passwd Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/preprocess Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/radutmp Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/realm Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/replicate Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/soh Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/sradutmp Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/unix Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/unpack Explicit %attr() mode not applicaple to symlink: /home/bogaczp/rpmbuild/BUILDROOT/freeradius-3.0.20-1.el7.x86_64/etc/raddb/mods-enabled/utf8 File listed twice: /etc/raddb/certs/bootstrap File listed twice: /etc/raddb/mods-config/sql File listed twice: /etc/raddb/mods-config/sql/ippool File listed twice: /etc/raddb/mods-config/sql/ippool-dhcp File listed twice: /etc/raddb/mods-config/sql/ippool-dhcp File listed twice: /etc/raddb/mods-config/sql/main Installed (but unpackaged) file(s) found: /usr/lib64/freeradius/rlm_sqlhpwippool.so i'm lost. rlm_sqlhpwippool.so is not even from oracle. where to look?

2 1

random SIGSEGV after upgrade to 3.0.20
by Ferdinand Goldmann 03 Mar '20

03 Mar '20

Hi, we upgraded our installation to 3.0.20 last week and started experiencing random SIGSEGV crashes on both of our radius servers. Appearently this is related to our eduroam setup. After adding 'status_check = status-server' to the eduroam home_server blocks the crashes stopped. We are unsure whether this is a bug, but it is sort of puzzling. Did anybody else experience something similar? Best regards, Ferdinand -- Ferdinand Goldmann System Administrator Information Management JOHANNES KEPLER UNIVERSITY LINZ Altenberger Straße 69 Hochschulfond Building, HF9902 4040 Linz, Austria P +43 732 2468 3925 ferdinand.goldmann(a)jku.at www.jku.at/im

2 4