March 2020 - Freeradius-Users - lists.freeradius.org

Initial setup error
by Farrell, Jolene 18 Mar '20

18 Mar '20

Hi FreeRADIUS, I am currently a new starter and first timer with building a RADIUS server. My ultimate goal is to set up a RADIUS server for only accounting purposes (storing CDR packets as flat files and then forwarding them to Splunk) but have run into a few problems following simple installation of the freeradius package. Upon running radiusd in debugging mode (following no changes made to the configuration files) I received the output attached at the bottom of the email (Error #1). I understand that this may have something to do with IPv6 compatibility, so I removed the “listen” sections listening for IPv6 addresses but this occurred in another error (Error #2) and I have struggled to find any documentation relating to this. I have also found little documentation on setting up and testing a FreeRADIUS server for accounting only purposes and was wondering if you could at all point me in the right direction? Error #1 [cid:image002.jpg@01D5FD1E.84A32BF0] Error #2 [cid:image004.jpg@01D5FD1E.84A32BF0] Jolene Farrell Graduate Network Software Specialist [/var/folders/jd/17dd5mm57fl5vdjmygpftn8w0000gp/T/com.microsoft.Word/Content.MSO/F5395A8E.tmp] This email may contain confidential information. If I've sent it to you by accident, please delete it immediately

3 4

Freeradius 3.0.19 causes 'acctterminatecause' cannot be null
by Houman 17 Mar '20

17 Mar '20

Hello, I'm using Freeradius 3.0.19 on Ubuntu 19.10. The default schema in /etc/freeradius/3.0/mods-config/sql/main/mysql/schema.sql doesn't seem to work. I get the following error message, when connecting with my NAS. (3) sql: ERROR: rlm_sql_mysql: ERROR 1048 (Column 'acctterminatecause' cannot be null): 23000 I have attached the detailed log. Fun fact, when I drop the radius_db and use the schema.sql from Freeradius 3.0.16 and also replace the queries.sql with the older version. cp queries.conf /etc/freeradius/3.0/mods-config/sql/main/mysql/ It works without any problem. So whatever it is it has something to do with the 3.0.19. I also experience the same problem with the latest Freeradius 3.0.20 Help would be kindly appreciated as I'm really stuck on this, Many Thanks, Houman

2 1

Is there a way to simply not respond to a request?
by adrian.p.smith＠bt.com 17 Mar '20

17 Mar '20

Our network team have asked if we can get FreeRadius to simply not respond under certain circumstances. i.e. if (some condition) { let client time out } Is this possible? TIA Adrian

2 2

Windows 10: EAP-TTLS certificate not trusted
by Joseph 16 Mar '20

16 Mar '20

Hi, I'm trying to get EAP-TTLS set up, but the certificate is always asking for verification. This is failing on Windows 10, but tests out ok (without complaining) with eapol_test, radtest, and Ubuntu 16.04. "Continue connecting? "If you expect to find your-wifi in this location, go ahead and connect. Otherwise, it may be a different network with the same name. "Server thumbprint: 21 4B 37 ED ..." This matches what I expect. The certificate information, on the radius server: $ openssl x509 -in server.pem -noout -text -fingerprint -sha256 Issuer: C = FR, ST = Radius, L = Somewhere, O = Example Inc., emailAddress = admin(a)example.org, CN = Example Certificate Authority Validity Not Before: Mar 4 19:20:40 2020 GMT Not After : May 3 19:20:40 2020 GMT Subject: C = FR, ST = Radius, O = Example Inc., CN = radius.internal.mydomain.com X509v3 Extended Key Usage: TLS Web Server Authentication X509v3 CRL Distribution Points: <present> X509v3 Subject Alternative Name: DNS:radius.internal.mydomain.com SHA256 Fingerprint=21:4B:37:ED:90:D8:... This seems to meet the requirements of https://wiki.freeradius.org/guide/Certificate_Compatibility (extended key usage) and https://wiki.geant.org/display/H2eduroam/EAP+Server+Certificate+considerati… (CN and SAN defined and the same, not wild card, extended key usage: authentication, age). TLS1.2 is enabled and shows to be used (Windows 8+ requirement) The CA certificate is added to Windows, Local computer, Trusted Root Certification Authorities: Example Certification Authority valid from: 3/3/2020 to 5/2/2020 CN = Example Certificate Authority, E = admin(a)example.org, O = Example Inc., L = Somewhere, S = Radius, C = FR Thumbprint: 4758ae7e Verifying this on the radius server, freerad@radius:~/3.0/certs$ openssl verify -verbose -CAfile ca.pem server.pem server.pem: OK $ openssl x509 -noout -in ca.pem -fingerprint -sha1 SHA1 Fingerprint=47:58:AE:7E... The radius server certificate would seem to be trusted. Does anyone know what I might be missing? ldap/eap configuration taken from https://github.com/hacor/unifi-freeradius-ldap, and I substituted in the ssl certificates. (Could the problem originate here?) The only thing missing is MTU/packet fragmentation, but I'm under the impression that's not happening -- or hoping. My network is just APs connected to a switch which routes to FreeRADIUS. FreeRADIUS then uses Google LDAP for authentication as EAP-TTLS/PAP. $ dpkg --list | grep freerad ii freeradius 3.0.16+dfsg-1ubuntu3.1 --- $ sudo -u freerad -g freerad -H freeradius -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/soh including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm BASE_DOMAIN.DOMAIN_EXTENSION { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-00 { ipaddr = 10.1.2.60 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-01 { ipaddr = 10.1.2.61 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-02 { ipaddr = 10.1.2.62 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-03 { ipaddr = 10.1.2.63 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-04 { ipaddr = 10.1.2.64 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-05 { ipaddr = 10.1.2.65 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_wireless-06 { ipaddr = 10.1.2.66 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius_client_Unifi_Server_01 { ipaddr = 10.1.2.23 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debug state unknown (cap_sys_ptrace capability not set) # Creating Auth-Type = mschap # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = "EdibleSilv" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "OU=People,OU=Users,dc=mydomain,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/3.0/certs/ldap-client.crt" private_key_file = "/etc/freeradius/3.0/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.pem" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no check_cert_issuer = "/C=US/ST=State/L=City/O=My Company, Inc." ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = yes lifetime = 12 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:338 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 52559 Listening on proxy address :: port 41814 Ready to process requests (0) Received Access-Request Id 145 from 10.1.2.63:39770 to 10.1.2.25:1812 length 203 (0) User-Name = "aoeueue" (0) NAS-Identifier = "788a2008ac06" (0) Called-Station-Id = "78-8A-20-08-AC-06:your-wifi" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "20-79-18-D6-97-96" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "10460A9D221FCF77" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02c7000c01616f6575657565 (0) Message-Authenticator = 0x7894af56d612c3847cc67ac34ce974a4 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "aoeueue", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 199 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 200 length 6 (0) eap: EAP session adding &reply:State = 0x9d62a3209daab67e (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 145 from 10.1.2.25:1812 to 10.1.2.63:39770 length 0 (0) EAP-Message = 0x01c800061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x9d62a3209daab67eaf85e9ac41fab325 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 146 from 10.1.2.63:39770 to 10.1.2.25:1812 length 366 (1) User-Name = "aoeueue" (1) NAS-Identifier = "788a2008ac06" (1) Called-Station-Id = "78-8A-20-08-AC-06:your-wifi" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "20-79-18-D6-97-96" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "10460A9D221FCF77" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02c8009d158000000093160303008e0100008a03035e5fffb222e70c8585fd5cea423796f3b4caf01df65ddd50d9f5a2921440e54c00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000037000a00080006001d00170018000b000201 (1) State = 0x9d62a3209daab67eaf85e9ac41fab325 (1) Message-Authenticator = 0xdb1ce7e27f2e12e2257dbb305ab6b7dd (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "aoeueue", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 200 length 157 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x9d62a3209daab67e (1) eap: Finished EAP session with state 0x9d62a3209daab67e (1) eap: Previous EAP request found for state 0x9d62a3209daab67e, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 147 bytes (1) eap_ttls: Got complete TLS record (147 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv UNKNOWN TLS VERSION ?0304? [length 008e] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.2 [length 003d] (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.2 [length 041a] (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 201 length 1004 (1) eap: EAP session adding &reply:State = 0x9d62a3209cabb67e (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 146 from 10.1.2.25:1812 to 10.1.2.63:39770 length 0 (1) EAP-Message = 0x01c903ec15c0000005bc160303003d0200003903034f445d4b3ba004eb7388e4b5e12e0173bd44ca258999f6ded22634da1265973000c030000011ff01000100000b00040300010200170000160303041a0b0004160004130004103082040c308202f4a003020102020104300d06092a864886f70d0101 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x9d62a3209cabb67eaf85e9ac41fab325 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 147 from 10.1.2.63:39770 to 10.1.2.25:1812 length 215 (2) User-Name = "aoeueue" (2) NAS-Identifier = "788a2008ac06" (2) Called-Station-Id = "78-8A-20-08-AC-06:your-wifi" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "20-79-18-D6-97-96" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "10460A9D221FCF77" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x02c900061500 (2) State = 0x9d62a3209cabb67eaf85e9ac41fab325 (2) Message-Authenticator = 0x9720567cc957cdcbb56432840e0750b9 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "aoeueue", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 201 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x9d62a3209cabb67e (2) eap: Finished EAP session with state 0x9d62a3209cabb67e (2) eap: Previous EAP request found for state 0x9d62a3209cabb67e, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 202 length 484 (2) eap: EAP session adding &reply:State = 0x9d62a3209fa8b67e (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 147 from 10.1.2.25:1812 to 10.1.2.63:39770 length 0 (2) EAP-Message = 0x01ca01e41580000005bc71fe0a93c2e2fbd0c480b490189396e814187d8424aef2b8319165605b0b9c9de0278032cc4936a02e1cd54e65e9716755396efa145db5278ae98b9dd3f382b32636bfa9e240467a98f57142f5e701f329571001cd7dcd915517959b84190bc5a9f852a90d0d8b7ed92ad53cf7 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x9d62a3209fa8b67eaf85e9ac41fab325 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 148 from 10.1.2.63:39770 to 10.1.2.25:1812 length 345 (3) User-Name = "aoeueue" (3) NAS-Identifier = "788a2008ac06" (3) Called-Station-Id = "78-8A-20-08-AC-06:your-wifi" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "20-79-18-D6-97-96" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "10460A9D221FCF77" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x02ca008815800000007e16030300461000004241040930b89367dc50b386787a93395c6e3c427ad8fb7d08a796229af9b6b04556173347967e24642a9392214501b1068fe4fc55d00190e650cce3a15b6ac0fc203014030300010116030300280000000000000000e69bea7456a63b68f8e1cc3bdd8969 (3) State = 0x9d62a3209fa8b67eaf85e9ac41fab325 (3) Message-Authenticator = 0x4a6d6a147abf70cc8516289ebf64f9d8 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "aoeueue", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 202 length 136 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x9d62a3209fa8b67e (3) eap: Finished EAP session with state 0x9d62a3209fa8b67e (3) eap: Previous EAP request found for state 0x9d62a3209fa8b67e, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (3) eap_ttls: Got complete TLS record (126 bytes) (3) eap_ttls: [eaptls verify] = length included (3) eap_ttls: TLS_accept: SSLv3/TLS write server done (3) eap_ttls: <<< recv TLS 1.2 [length 0046] (3) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (3) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (3) eap_ttls: <<< recv TLS 1.2 [length 0010] (3) eap_ttls: TLS_accept: SSLv3/TLS read finished (3) eap_ttls: >>> send TLS 1.2 [length 0001] (3) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (3) eap_ttls: >>> send TLS 1.2 [length 0010] (3) eap_ttls: TLS_accept: SSLv3/TLS write finished (3) eap_ttls: (other): SSL negotiation finished successfully (3) eap_ttls: SSL Connection Established (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 203 length 61 (3) eap: EAP session adding &reply:State = 0x9d62a3209ea9b67e (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 148 from 10.1.2.25:1812 to 10.1.2.63:39770 length 0 (3) EAP-Message = 0x01cb003d158000000033140303000101160303002870a65b66c2192b62a01caa7fffad2cbb2e33ac17844df277ecf4437404e5db6113ec2d263c1e51c4 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x9d62a3209ea9b67eaf85e9ac41fab325 (3) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 145 with timestamp +9 (1) Cleaning up request packet ID 146 with timestamp +9 (2) Cleaning up request packet ID 147 with timestamp +9 (3) Cleaning up request packet ID 148 with timestamp +9 Ready to process requests logs through when Windows started waiting at the certificate fingerprint.

3 3

Re: Freeradius-Users Digest, Vol 179, Issue 27
by Gleb Lisikh 16 Mar '20

16 Mar '20

Yes, edited it appropriately, and it's a still a simlink Gleb On Mon, Mar 16, 2020 at 7:00 AM < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. 3.0.21 installed from source fails to parse > /mods-config/files/authorize? (Gleb Lisikh) > 2. Re: 3.0.21 installed from source fails to parse > /mods-config/files/authorize? (Matthew Newton) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 15 Mar 2020 21:40:13 -0400 > From: Gleb Lisikh <in4bit.general(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: 3.0.21 installed from source fails to parse > /mods-config/files/authorize? > Message-ID: > < > CAKMAD3kWZp1T3ZgAGNS4xCD+h9KXLz+qxi0PqdUiyKzr2XGM1w(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Installed 3.0.21 from source on Ubuntu18 (from scratch) and on CentOS7 > (over previous working 3.0.20 instance), and in both cases got the > following when doing the "Initial Test" > radtest testing password 127.0.0.1 0 testing123 > as per > https://wiki.freeradius.org/guide/Getting-Started > > (0) pap: WARNING: No "known good" password found for the user. Not setting > Auth-Type > (0) pap: WARNING: Authentication will fail unless a "known good" password > is available > (0) [pap] = noop > (0) } # authorize = ok > (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = > Reject > > radiusd -X seems to have launched OK. > > What's wrong? > > T^hank you! > > > ------------------------------ > > Message: 2 > Date: Mon, 16 Mar 2020 02:23:22 +0000 > From: Matthew Newton <mcn(a)freeradius.org> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: 3.0.21 installed from source fails to parse > /mods-config/files/authorize? > Message-ID: > <72f9a65f24ebb6cd2bf5cbc70d61eeb3f7c0d21a.camel(a)freeradius.org> > Content-Type: text/plain; charset="UTF-8" > > On Sun, 2020-03-15 at 21:40 -0400, Gleb Lisikh wrote: > > Installed 3.0.21 from source on Ubuntu18 (from scratch) and on > > CentOS7 > > (over previous working 3.0.20 instance), and in both cases got the > > following when doing the "Initial Test" > > radtest testing password 127.0.0.1 0 testing123 > > as per > > https://wiki.freeradius.org/guide/Getting-Started > > > > (0) pap: WARNING: No "known good" password found for the user. Not > > setting > > Auth-Type > > (0) pap: WARNING: Authentication will fail unless a "known good" > > password > > is available > > No password available. > > Did you add the entry to the "users" file? > > testing Cleartext-Password := "password" > > Make sure the users file is still a symlink. If you edited it but it's > a plain file then that's likely the problem. > > -- > Matthew > > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > ------------------------------ > > End of Freeradius-Users Digest, Vol 179, Issue 27 > ************************************************* >

1 0

3.0.21 installed from source fails to parse /mods-config/files/authorize?
by Gleb Lisikh 16 Mar '20

16 Mar '20

Installed 3.0.21 from source on Ubuntu18 (from scratch) and on CentOS7 (over previous working 3.0.20 instance), and in both cases got the following when doing the "Initial Test" radtest testing password 127.0.0.1 0 testing123 as per https://wiki.freeradius.org/guide/Getting-Started (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject radiusd -X seems to have launched OK. What's wrong? T^hank you!

2 1

FR 3.0 radsec : dynamic home server discovery status
by Arnaud LAURIOU 13 Mar '20

13 Mar '20

Hello, We are upgrading our federation eduroam servers to Radius over tcp. Regarding the dynamic home server discovery feature through naptr record, is it available in FR 3.0 ? I don't think so, but I'm not sure. Regards, Arnaud Lauriou

9 24

FW: OCSP Error: "Couldn't get issuer_cert" with EAP-TLS
by Barry Hesk 13 Mar '20

13 Mar '20

Hi Be really grateful for some assistance in this setup: 1. FreeRadius 3.0.16 running on Ubuntu 18.04 LTS 2. I have enabled EAP-TLS and have this working. The certificates (CA, Server, Client) have been created and imported from Microsoft CA server. 3. I have copied the CA certificate to /etc/freeradius/3.0/certs/root.pem and the server certificate / private key to /etc/freeradius/3.0/certs/radcert.pem 4. My eap module config looks like: tls-config tls-common { private_key_password = <password> private_key_file = /etc/freeradius/3.0/certs/radcert.pem certificate_file = /etc/freeradius/3.0/certs/radcert.pem ca_file = /etc/freeradius/3.0/certs/root.pem dh_file = ${certdir}/dh ca_path = ${cadir} cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" ocsp { enable = yes override_cert_url = yes". url = "http://<IP address>/ocsp<http://%3cIP%20address%3e/ocsp>" timeout = 0 } } Without OCSP enabled, everything works. I can authenticate from a Wireless Access Point using a client certificate and EAP-TLS. I have configured OCSP in my Microsoft PKI environment and confirmed it works using the inbuilt Microsoft tools and OCSP Responder. I can use the URL listed above "http://<IP address>/ocsp<http://%3cIP%20address%3e/ocsp>" to check the certificate validity outside of FreeRadius. When I enable OSCP on FreeRadius, I receive an error message on client authentication "Could not get issuer_cert". FreeRADIUS doesn't attempt to query the OCSP URL (confirmed by packet capture). I have run FreeRadius in debug mode, where I see the message. "BARRYE540.intrinsic-comms.co.uk" is the CN of the client side certificate. "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" is my CA. This is the certificate in the file /etc/freeradius/3.0/certs/root.pem This CA signed both my server certificate, and also the client certificate. (6) authenticate { (6) eap: Expiring EAP session with state 0xbe16c925bb1ec429 (6) eap: Finished EAP session with state 0xbe16c925bb1ec429 (6) eap: Previous EAP request found for state 0xbe16c925bb1ec429, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Got final TLS record fragment (430 bytes) (6) eap_tls: [eaptls verify] = ok (6) eap_tls: Done initial handshake (6) eap_tls: TLS_accept: SSLv3/TLS write server done (6) eap_tls: <<< recv TLS 1.0 Handshake [length 05ec], Certificate (6) eap_tls: Creating attributes from certificate OIDs (6) eap_tls: TLS-Cert-Serial := "65af3f02a6ec65a44c0e7514e4264d26" (6) eap_tls: TLS-Cert-Expiration := "210606133907Z" (6) eap_tls: TLS-Cert-Subject := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Cert-Issuer := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Cert-Common-Name := "intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: Creating attributes from certificate OIDs (6) eap_tls: TLS-Client-Cert-Serial := "61ab3a63000000000024" (6) eap_tls: TLS-Client-Cert-Expiration := "210311124806Z" (6) eap_tls: TLS-Client-Cert-Subject := "/CN=BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-Issuer := "/DC=uk/DC=co/DC=intrinsic-comms/CN=intrinsic-comms-INTRINSIC-DC1-CA" (6) eap_tls: TLS-Client-Cert-Common-Name := "BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-Subject-Alt-Name-Dns := "BARRYE540.intrinsic-comms.co.uk" (6) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication, TLS Web Server Authentication" (6) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "92:B0:76:E0:FF:A4:21:CA:90:86:5D:ED:30:95:76:ED:1B:39:7C:3C" (6) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:6E:8C:54:CC:71:53:48:A7:7B:C7:56:CA:9F:BA:B2:00:D0:D0:B0:4D\n" (6) eap_tls: Starting OCSP Request (6) eap_tls: ERROR: Couldn't get issuer_cert for BARRYE540.intrinsic-comms.co.uk (6) eap_tls: TLS_accept: SSLv3/TLS read client certificate (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (6) eap_tls: TLS_accept: SSLv3/TLS read client key exchange (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0106], CertificateVerify (6) eap_tls: TLS_accept: SSLv3/TLS read certificate verify (6) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec (6) eap_tls: <<< recv TLS 1.0 Handshake [length 0010], Finished (6) eap_tls: TLS_accept: SSLv3/TLS read finished (6) eap_tls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (6) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec (6) eap_tls: >>> send TLS 1.0 Handshake [length 0010], Finished (6) eap_tls: TLS_accept: SSLv3/TLS write finished (6) eap_tls: (other): SSL negotiation finished successfully (6) eap_tls: SSL Connection Established (6) eap_tls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 9 length 69 (6) eap: EAP session adding &reply:State = 0xbe16c925b81fc429 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 56 from 10.1.201.131:1812 to 10.1.200.5:1645 length 0 (6) EAP-Message = 0x010900450d800000003b14030100010116030100300d1b86144514486ac8365c982b727cc67cc948850c735a28a07e93f2 b24bf4b0858e5ac5677c48fbcb1293e30098f482 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xbe16c925b81fc4295f491b5eb49b13aa (6) Finished request If there are any other further debugs or outputs that would assist, please let me know. Thanks.

2 4

Framed-IP-Address Help
by Aurélio de Souza Ribeiro Neto 13 Mar '20

13 Mar '20

Hello Everyone, I need help. In my default configuration file I did this change in authenticate session: Auth-Type mschap { mschap { reject = 1 } if(reject) { update control { Pool-Name := "mkt_pool" } update reply { Mikrotik-Rate-Limit := "2M/2M" } ok } } This change is for give an IP from another POOL if the user is with invalid credentials. All works fine if the IP comes from DHCP, but if the user have a fixed IP then the IP is not changed. How can I remove the fixed IP to force the user to receive an IP from pool that I choose? Thanks Aurelio

3 10

Re: Python "import" statement fails for any module in /site-packages/ when run by radiusd from example.py
by Jorge Pereira 12 Mar '20

12 Mar '20

> On 12 Mar 2020, at 15:21, Gleb Lisikh <in4bit.general(a)gmail.com> wrote: > > Thanks Jorge! > > Thank you so much for your prompt response!! > > FreeRADIUS Version 3.0.20 > Python version: 2.7.5 (default, Dec 4 2019, 17:34:13) [GCC 4.8.5 20150623 (Red Hat 4.8.5-39.0.1)] > > Are you saying that what I described is a known problem/bug, and that 3.0.21 deals with it? Any references that would detail this? > It was fixed as can be seen in https://github.com/FreeRADIUS/freeradius-server/pull/3184 <https://github.com/FreeRADIUS/freeradius-server/pull/3184> > Thank you again! > > Gleb > > > > On Thu, Mar 12, 2020 at 2:06 PM Jorge Pereira <jpereira(a)freeradius.org <mailto:jpereira@freeradius.org>> wrote: > Hi, > > Which version are you running? Because it was fixed a few months ago and It only will be available on next 3.0.21. But, you could build your own version from the latest code base in https://github.com/FreeRADIUS/freeradius-server/commits/v3.0.x <https://github.com/FreeRADIUS/freeradius-server/commits/v3.0.x> and see if your tests will work fine. > > --- > Jorge Pereira > jpereira(a)freeradius.org <mailto:jpereira@freeradius.org> > > > > >> On 12 Mar 2020, at 14:58, Gleb Lisikh <in4bit.general(a)gmail.com <mailto:in4bit.general@gmail.com>> wrote: >> >> Before I go into exact code, paths, version etc. any general advice or >> troubleshooting steps for figuring out why python import statement fails to >> execute for any python library I try to call for >> from /etc/raddb/mods-config/python/example.py? >> >> - example.py runs fine for other python statements >> - I can do "import sys" and it works fine, but sys is a built in python >> module >> - I can execute "import" for any python module defined >> under /usr/lib/python2.7/site-packages/ in python environment under radiusd >> users (e.g. sudo -u radiusd python) >> >> I am very amateur when it comes to linuz, so please bear with me... >> >> Thank you! >> >> Gleb Lisikh >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html <http://www.freeradius.org/list/users.html>

1 0