July 2020 - Freeradius-Users - lists.freeradius.org

Freeradius Authenticate ADSL with Calling-Station ID
by Maile Halatuituia 19 Jul '20

19 Jul '20

Hi List Appreciate if someone would give some hint on the above subject. Thanks [TCC] Confidentiality Notice: This email (including any attachment) is intended for internal use only. Any unauthorized use, dissemination or copying of the content is prohibited. If you are not the intended recipient and have received this e-mail in error, please notify the sender by email and delete this email and any attachment.

3 8

sending attributes
by Marco Miglietta 19 Jul '20

19 Jul '20

I have problems in sending attributes with some nas. It' seems that I have to send attributes in the access-accept message and probably it's not so. How can I solve this problem ? Thank you v.m. Marco. --

2 2

Group policy on freeradius like on microsoft NPS server
by MD. NUR KHAKIM A`ZIIZUDIN 17 Jul '20

17 Jul '20

Hi there, i'm new to freeradius, recently we are implementing freeradius as AAA server to authenticate user throug aruba wifi controller our setup is openldap + freeradius + aruba we use AD + NPS server + aruba before, and have implemented group policy on our network configuration that read filter-id attribute so how we do the same thing on freeradius, i've been searching on google and didn't find anything. if anyone know how to add group policy for openldap + freeradius + aruba setup please let me know how to do it. Best Regards -- MD Nur Khakim Aziizudin Network & system administrator directorate of IT infrastructure National Civil Service Agency of Indonesia

2 1

Helper Script to convert clients.conf to new format
by Sven Hartge 17 Jul '20

17 Jul '20

Hi .*, I need to convert some larger legacy clients.conf to the new format and wondered if anyone has already written a little helper script automating this and is willing to share it. Grüße, Sven.

1 0

SQL Maps
by FRANKS, Andy (SHREWSBURY AND TELFORD HOSPITAL NHS TRUST) 16 Jul '20

16 Jul '20

Hi all, We've been using the 3.1 branch for the sql maps ability for a bit, but realise we now need to move onto a currently supported branch as it no longer compiles in recenty versions of Ubuntu, our preferred linux flavour. We extensively used sql maps with the syntax talked about here: https://github.com/FreeRADIUS/freeradius-server/issues/984 e.g. map <map proc isnt> <source> { <server attr0> <op0> <result attr0> <server attr1> <op1> <result attr1> <server attrN> <opN> <result attrN> } .. a real example we used being map sql_SP_radiussql &control:Tmp-String-0 { control:Tmp-string-1 += tmp_acctuniqueid control:Tmp-string-2 += tmp_acctsessionid control:Tmp-string-3 += tmp_username control:Tmp-string-4 += tmp_devicetype control:Tmp-string-5 += tmp_macaddresslimit control:Tmp-string-6 += tmp_acctstarttime control:Tmp-string-7 += tmp_duplicate } Which worked well. Is this functionality still valid, and is the syntax now different? Kind Regards Andy ******************************************************************************************************************** This message may contain confidential information. If you are not the intended recipient please inform the sender that you have received the message in error before deleting it. Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation. NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services. For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

3 6

Config file include order bug?
by Sven Hartge 16 Jul '20

16 Jul '20

Hello! I just noticed something strange with 3.0.21 from buster-backports. I have a custom policy in policy.d/thm_rada uses another policy from policy.d/canonicalization and this works in my test system: [...] including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/thm_rada including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/operator-name including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" [...] Now I tar'ed and copied the whole /etc/freeradius/ structure to my new to-be-production system and this happens: [...] including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/thm_rada /etc/freeradius/3.0/policy.d/thm_rada[6]: Reference "${policy.mac-addr-regexp}" not found /etc/freeradius/3.0/policy.d/thm_rada[6]: Parse error expanding ${...} in condition Errors reading or parsing /etc/freeradius/3.0/radiusd.conf [...] Notice how the load-order is different? It seems freeradius does not load the files in alphanumeric order but in the order the filesystem presents them, breaking the parsing of policy.d/thm_rada in this case because policy.d/canonicalization hasn't been parsed yet. Is this known or am I doing something wrong? The comment states "If policy A calls policy B, then B MUST be defined before A." which I am doing here, because "t" comes after "c" but it clearly isn't doing that. Grüße, Sven

4 17

Re: Freeradius Authenticate ADSL with Calling-Station ID
by Dan Swartzendruber 15 Jul '20

15 Jul '20

Lololol On July 15, 2020, at 4:32 PM, marki <jm+freeradiususer(a)roth.lu> wrote: This is hilarious. I am grabbing popcorn as we speak. On July 15, 2020 10:20:09 PM GMT+02:00, Maile Halatuituia <maile.halatuituia(a)tcc.to> wrote: >Hi List > >Appreciate if someone would give some hint on the above subject. > > >Thanks > >[TCC] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Re: TLS proxy and fail-over
by Jonas Kirchner 15 Jul '20

15 Jul '20

> I've attached a patch which _may_ help Please test. And if so, I'll push it to the v3.0.x branch. > > Alan DeKok. Hi Alan, this did the trick. Many thanks! Jonas (Used another mail address - Mailfence seems to be not working properly at the moment...)

2 1

Kicking Out Clients
by Eric Aguilar 15 Jul '20

15 Jul '20

Hello, I’m using Grandstream and Aruba APs. I’m trying to kick out clients from Wifi from Radius and also I’m trying to setup the timeout from Radius. Could you guide me on how to do this? if you could point me out into the right documentation. Thanks Eric

2 1

mschap configuration problem
by Piviul 15 Jul '20

15 Jul '20

Hi there, I'm new to freeradius and I'm trying to configure it to authenticate on a AD domain using mschap and ntlm_auth. From a client I have put domain, username and password in variables to be sure that there are no typing errors, then I run: > # ntlm_auth --allow-mschapv2 --domain=$domain --username=$username --password=$password && radtest -t mschap "$domain\\$username" $password 127.0.0.1 0 testing123 > NT_STATUS_OK: The operation completed successfully. (0x0) > Sent Access-Request Id 58 from 0.0.0.0:55359 to 127.0.0.1:1812 length 139 > User-Name = "CSATEST\\user1" > MS-CHAP-Password = "Alfa.2020" > NAS-IP-Address = 192.168.64.10 > NAS-Port = 0 > Message-Authenticator = 0x00 > Cleartext-Password = "Alfa.2020" > MS-CHAP-Challenge = 0x6b4e461a0c35c8da > MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000fa5ab330052688e78de5ccbba7d9d954abf1e1b85596b385 > Received Access-Reject Id 58 from 127.0.0.1:1812 to 127.0.0.1:55359 length 61 > MS-CHAP-Error = "\000E=691 R=1 C=373db952a357b248 V=2" > (0) -: Expected Access-Accept got Access-Reject From server side freeradius said: > (5) Received Access-Request Id 58 from 127.0.0.1:55359 to 127.0.0.1:1812 length 139 > (5) User-Name = "CSATEST\\user1" > (5) NAS-IP-Address = 192.168.64.10 > (5) NAS-Port = 0 > (5) Message-Authenticator = 0x20d737038881440d2585fa1b63641a0f > (5) MS-CHAP-Challenge = 0x6b4e461a0c35c8da > (5) MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000fa5ab330052688e78de5ccbba7d9d954abf1e1b85596b385 > (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default > (5) authorize { > (5) policy filter_username { > (5) if (&User-Name) { > (5) if (&User-Name) -> TRUE > (5) if (&User-Name) { > (5) if (&User-Name =~ / /) { > (5) if (&User-Name =~ / /) -> FALSE > (5) if (&User-Name =~ /@[^@]*@/ ) { > (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (5) if (&User-Name =~ /\.\./ ) { > (5) if (&User-Name =~ /\.\./ ) -> FALSE > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE > (5) if (&User-Name =~ /\.$/) { > (5) if (&User-Name =~ /\.$/) -> FALSE > (5) if (&User-Name =~ /(a)\./) { > (5) if (&User-Name =~ /(a)\./) -> FALSE > (5) } # if (&User-Name) = notfound > (5) } # policy filter_username = notfound > (5) [preprocess] = ok > (5) [chap] = noop > (5) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' > (5) [mschap] = ok > (5) [digest] = noop > (5) suffix: Checking for suffix after "@" > (5) suffix: No '@' in User-Name = "CSATEST\user1", looking up realm NULL > (5) suffix: No such realm "NULL" > (5) [suffix] = noop > (5) eap: No EAP-Message, not doing EAP > (5) [eap] = noop > (5) [files] = noop > (5) [expiration] = noop > (5) [logintime] = noop > (5) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type > (5) pap: WARNING: Authentication will fail unless a "known good" password is available > (5) [pap] = noop > (5) } # authorize = ok > (5) Found Auth-Type = mschap > (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (5) authenticate { > (5) mschap: Client is using MS-CHAPv1 with NT-Password > (5) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name}: > (5) mschap: EXPAND --domain=%{mschap:NT-Domain} > (5) mschap: --> --domain=CSATEST > (5) mschap: EXPAND --username=%{mschap:User-Name} > (5) mschap: --> --username=user1 > (5) mschap: ERROR: Program returned code (1) and output 'Password: NT_STATUS_WRONG_PASSWORD: When trying to update a password, this return status indicates that the value provided as the current password is not correct. (0xc000006a)' > (5) mschap: External script failed > (5) mschap: ERROR: External script says: Password: NT_STATUS_WRONG_PASSWORD: When trying to update a password, this return status indicates that the value provided as the current password is not correct. (0xc000006a) > (5) mschap: ERROR: MS-CHAP2-Response is incorrect > (5) [mschap] = reject > (5) } # authenticate = reject > (5) Failed to authenticate the user > (5) Using Post-Auth-Type Reject > (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (5) Post-Auth-Type REJECT { > (5) attr_filter.access_reject: EXPAND %{User-Name} > (5) attr_filter.access_reject: --> CSATEST\\user1 > (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (5) [attr_filter.access_reject] = updated > (5) [eap] = noop > (5) policy remove_reply_message_if_eap { > (5) if (&reply:EAP-Message && &reply:Reply-Message) { > (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (5) else { > (5) [noop] = noop > (5) } # else = noop > (5) } # policy remove_reply_message_if_eap = noop > (5) } # Post-Auth-Type REJECT = updated > (5) Login incorrect (mschap: Program returned code (1) and output 'Password: NT_STATUS_WRONG_PASSWORD: When trying to update a password, this return status indicates that the value provided as the current password is not correct. (0xc000006a)'): [CSATEST\user1] (from client localhost port 0) > (5) Delaying response for 1.000000 seconds > Waking up in 0.2 seconds. > Waking up in 0.7 seconds. > (5) Sending delayed response > (5) Sent Access-Reject Id 58 from 127.0.0.1:1812 to 127.0.0.1:55359 length 61 > (5) MS-CHAP-Error = "\000E=691 R=1 C=373db952a357b248 V=2" > Waking up in 3.9 seconds. > (5) Cleaning up request packet ID 58 with timestamp +927 Someone can help me to understand where I wrong? Piviul

4 18