November 2021 - Freeradius-Users - lists.freeradius.org

Radsec Regression Alpine 3.14
by Emile Swarts 11 Nov '21

11 Nov '21

I recently upgraded Alpine from v3.12 to v3.14. Noticed that Radsec stopped working, and the only error message I get in the server logs is "(0) FAILED in TLS handshake receive". Switching back to v3.12 fixes the issue and the AP is able to establish the Radsec tunnel and do the authentication. I'm currently looking through all the dependencies that upgraded as part of the OS upgrade but it's difficult to pinpoint which one broke Radsec. Noted that openssl has stayed on the same version. FreeRadius versions went from: freeradius-lib-3.0.21-r3 freeradius-3.0.21-r3 freeradius-eap-3.0.21-r3 To: freeradius-lib-3.0.23-r0 freeradius-3.0.23-r0 freeradius-eap-3.0.23-r0 The rest of the package upgrades can be found here: https://gist.github.com/emileswarts/fd7d46556eacac096d318170aea7a19d Does anyone have any pointers on how to narrow down this bug? Thanks, Emile

5 29

How do I point a client to a unicast DHCP server?
by Selahattin CILEK 11 Nov '21

11 Nov '21

I am using FreeRADIUS 3.0.23 to deliver services on pfSense 2.5.2 ( FreeBSD 12.2). Because of some rogue users, I have to issue each device a static IP address. I know I can do this thanks to the *dhcp_sqlippool* mod, but reading the *dhcp* site provided by the default install, I ran into this sentence: FreeBSD does *not* support binding sockets to interfaces. ... I know a solution is suggested in the same paragraph, but I will do that only as a last resort. I went ahead and added *dhcp* to *sites-enabled* anyway and then ran FreeRADIUS in debug mode (radiusd -X). It was a success: ... listen { type = "dhcp" ipaddr = 192.168.1.1 port = 67 *No "interface" setting is defined. Only unicast DHCP will work* } Listening on auth address 127.0.0.1 port 18127 bound to server inner-tunnel-ttls Listening on auth address 127.0.0.1 port 18128 bound to server inner-tunnel-peap Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on dhcp address 192.168.1.1 port 67 bound to server dhcp Ready to process requests So I see I can still use the DHCP functionality, but with a caveat: I must somehow get the client to ask for an IP address directly from the router's LAN IP address. So my question is: Can I somehow get the clients to use unicast DHCP? In other words, is there some sort of RADIUS attribute I can inject into the authentication reply so that it will know where to get its IP from? -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

2 1

Sometimes failing EAP authentication in Windows 11 and WiFi
by Thomas Schachtner 11 Nov '21

11 Nov '21

Hi there, We are currently seeing a strange phenomenon on our Windows 11 clients authenticating on the WiFi network using their Active Directory computer certificates using FreeRADIUS. I am not sure if everything is configured correctly, as I am not very familiar with all the details of the EAP mechanism (is there a good documentation of EAP?), but it used to work fine with Windows 10. It also used to work on Windows 11 some days ago, but currently it does not work anymore now – while on the Windows 10 boxes, authenticating is still working fine. Can anyone help as I don’t get a clue out oft he logs – especially as it used to work some days ago and it still works on Windows 10. I guess that the problem is somehow with the following log entries: (6) eap_peap: <<< recv TLS 1.2 [length 0002] (6) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (6) eap_peap: WARNING: No data inside of the tunnel (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state ? (6) eap_peap: ERROR: Tunneled data is invalid (6) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 236 length 4 (6) eap: Failed in EAP select But I am not sure what this means exactly. (Where are the CA certificates located which are checked? Why is it unknown? It should be well-known everywhere here… What does that „No data inside of the tunnel“ mean? Or is this an expected behaviour?) Does anyone have the same issue? Has it been solved? Or does anyone know what’s going wrong here? It may be caused by settings in the eap module configuration file, which is shown below: eap { default_eap_type = md5 timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = ${max_requests} md5 { } leap { } gtc { auth_type = PAP } tls-config tls-common { private_key_password = XXXXXXXXXXXXX private_key_file = /etc/freeradius/3.0/certs/mykey.pem certificate_file = /etc/freeradius/3.0/certs/certificate.pem ca_file = /etc/freeradius/3.0/certs/ca.pem dh_file = ${certdir}/dh ca_path = ${cadir} cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no } verify { } ocsp { enable = no override_cert_url = yes url = http://127.0.0.1/ocsp/ } } tls { tls = tls-common } ttls { tls = tls-common default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } peap { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } mschapv2 { } } Here’s the log: FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/pam including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/rd-wifi-clients including configuration file /etc/freeradius/3.0/sites-enabled/rd-vpn main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server rd-wifi-clients { virtual_server = "rd-wifi-clients" port = 0 type = "auth" response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server rd-vpn { virtual_server = "rd-vpn" port = 0 type = "auth" response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server securenvoy { ipaddr = 10.10.8.27 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } home_server_pool rd-wifi-clients-pool { type = fail-over home_server = rd-wifi-clients } realm rd-wifi-clients-realm { auth_pool = rd-wifi-clients-pool nostrip } home_server_pool rd-vpn-pool { type = fail-over home_server = rd-vpn } realm rd-vpn-realm { auth_pool = rd-vpn-pool } home_server_pool securenvoy_failover { type = fail-over home_server = securenvoy } realm securenvoy-realm { auth_pool = securenvoy_failover } realm LOCAL { } realm uh.something { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw03 { ipaddr = 10.10.10.10 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw02 { ipaddr = 10.10.40.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw01 { ipaddr = 10.10.30.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw04 { ipaddr = 10.10.50.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw07 { ipaddr = 10.10.60.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sv-fw05 { ipaddr = 192.168.21.254 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client uh-sw-5-uv03-01 { ipaddr = 10.10.90.21 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client uh-sw-4-rd1-01 { ipaddr = 10.10.90.10 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client uh-sw-4-rd1-02 { ipaddr = 10.10.90.11 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Auth-Type = pam # Creating Auth-Type = ntlm_auth # Creating Auth-Type = MSCAP-RD radiusd: #### Instantiating modules #### modules { # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "uh-dc01.uh.something.de" identity = "CN=FW_LDAP,OU=OU-ServiceAccounts,OU=OU-Business,DC=uh,DC=something,DC=de" password = <<< secret >>> sasl { } user { /etc/freeradius/3.0/mods-enabled/ldap[164]: Ignoring duplicate configuration item 'filter' scope = "sub" access_positive = yes sasl { } } group { filter = "(cn=VPN-Users)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=uh,dc=something,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=UH.SOMETHING --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_pam # Loading module "pam" from file /etc/freeradius/3.0/mods-enabled/pam pam { pam_auth = "radiusd" } instantiate { } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } rlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending slots used rlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending slots used rlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending slots used rlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending slots used rlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending slots used rlm_mschap (mschap): authenticating directly to winbind # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://uh-dc01.uh.something.de:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://uh-dc01.uh.something.de:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://uh-dc01.uh.something.de:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://uh-dc01.uh.something.de:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://uh-dc01.uh.something.de:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/mykey.pem" certificate_file = "/etc/freeradius/3.0/certs/certificate.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = http://127.0.0.1/ocsp/ use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:361 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server rd-wifi-clients { # from file /etc/freeradius/3.0/sites-enabled/rd-wifi-clients # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server rd-wifi-clients server rd-vpn { # from file /etc/freeradius/3.0/sites-enabled/rd-vpn # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server rd-vpn radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 53014 Listening on proxy address :: port 44477 Ready to process requests (0) Received Access-Request Id 60 from 10.10.10.10:59601 to 10.10.8.43:1812 length 180 (0) User-Name = "host/PC08921.uh.something.de" (0) NAS-Identifier = "RD" (0) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Port = 1 (0) Calling-Station-Id = "3C-9C-0F-18-E6-97" (0) Connect-Info = "CONNECT 54Mbps 802.11g" (0) Framed-MTU = 1400 (0) EAP-Message = 0x02e6001c01686f73742f504330383932312e67702e7669656c2e6465 (0) Message-Authenticator = 0x86259b0c70d8e01ec2abaf8cb2306cb6 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) if (NAS-Identifier == "RD") { (0) if (NAS-Identifier == "RD") -> TRUE (0) if (NAS-Identifier == "RD") { (0) policy filter_hosts { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name !~ /^host\//) { (0) if (&User-Name !~ /^host\//) -> FALSE (0) } # if (&User-Name) = ok (0) } # policy filter_hosts = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 230 length 28 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # if (NAS-Identifier == "RD") = ok (0) if (NAS-Identifier == "UH-SW-5-UV03-01") { (0) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (0) if (NAS-Identifier == "l2tp") { (0) if (NAS-Identifier == "l2tp") -> FALSE (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 231 length 22 (0) eap: EAP session adding &reply:State = 0x7436d43a74d1d0e4 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 60 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (0) EAP-Message = 0x01e70016041048fa2cf89d289389fa2d9f4c0fd80f97 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x7436d43a74d1d0e4be7b78f9b6da9fe2 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 61 from 10.10.10.10:59601 to 10.10.8.43:1812 length 176 (1) User-Name = "host/PC08921.uh.something.de" (1) NAS-Identifier = "RD" (1) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Port = 1 (1) Calling-Station-Id = "3C-9C-0F-18-E6-97" (1) Connect-Info = "CONNECT 54Mbps 802.11g" (1) Framed-MTU = 1400 (1) EAP-Message = 0x02e700060319 (1) State = 0x7436d43a74d1d0e4be7b78f9b6da9fe2 (1) Message-Authenticator = 0xaab1839379de4cefa6ea50aaddaf25bc (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) if (NAS-Identifier == "RD") { (1) if (NAS-Identifier == "RD") -> TRUE (1) if (NAS-Identifier == "RD") { (1) policy filter_hosts { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name !~ /^host\//) { (1) if (&User-Name !~ /^host\//) -> FALSE (1) } # if (&User-Name) = ok (1) } # policy filter_hosts = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 231 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) policy ntlm_auth.authorize { (1) if (!control:Auth-Type && User-Password) { (1) if (!control:Auth-Type && User-Password) -> FALSE (1) } # policy ntlm_auth.authorize = updated (1) } # if (NAS-Identifier == "RD") = updated (1) if (NAS-Identifier == "UH-SW-5-UV03-01") { (1) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (1) if (NAS-Identifier == "l2tp") { (1) if (NAS-Identifier == "l2tp") -> FALSE (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x7436d43a74d1d0e4 (1) eap: Finished EAP session with state 0x7436d43a74d1d0e4 (1) eap: Previous EAP request found for state 0x7436d43a74d1d0e4, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 232 length 6 (1) eap: EAP session adding &reply:State = 0x7436d43a75decde4 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 61 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (1) EAP-Message = 0x01e800061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x7436d43a75decde4be7b78f9b6da9fe2 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 62 from 10.10.10.10:59601 to 10.10.8.43:1812 length 342 (2) User-Name = "host/PC08921.uh.something.de" (2) NAS-Identifier = "RD" (2) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Port = 1 (2) Calling-Station-Id = "3C-9C-0F-18-E6-97" (2) Connect-Info = "CONNECT 54Mbps 802.11g" (2) Framed-MTU = 1400 (2) EAP-Message = 0x02e800ac1980000000a2160303009d010000990303618b8760df53a0b68a59588f034bf63bc4a9bde5e549697b062c3cdbe74c4d1f00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a00080006001d (2) State = 0x7436d43a75decde4be7b78f9b6da9fe2 (2) Message-Authenticator = 0xd3760542f0784a20a45e8de101aa6df6 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) if (NAS-Identifier == "RD") { (2) if (NAS-Identifier == "RD") -> TRUE (2) if (NAS-Identifier == "RD") { (2) policy filter_hosts { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name !~ /^host\//) { (2) if (&User-Name !~ /^host\//) -> FALSE (2) } # if (&User-Name) = ok (2) } # policy filter_hosts = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 232 length 172 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # if (NAS-Identifier == "RD") = ok (2) if (NAS-Identifier == "UH-SW-5-UV03-01") { (2) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (2) if (NAS-Identifier == "l2tp") { (2) if (NAS-Identifier == "l2tp") -> FALSE (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x7436d43a75decde4 (2) eap: Finished EAP session with state 0x7436d43a75decde4 (2) eap: Previous EAP request found for state 0x7436d43a75decde4, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 162 bytes (2) eap_peap: Got complete TLS record (162 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 009d] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 09dd] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 233 length 1004 (2) eap: EAP session adding &reply:State = 0x7436d43a76dfcde4 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 62 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (2) EAP-Message = 0x01e903ec19c000000b7f160303003d020000390303b2a30f54097743131ed2771d6f67891c983576e3faf31e70132931aec9ab2c9900c030000011ff01000100000b0004030001020017000016030309dd0b0009d90009d60006303082062c30820514a0030201020213460000009bc8cd1dbbd3313db6 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x7436d43a76dfcde4be7b78f9b6da9fe2 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 63 from 10.10.10.10:59601 to 10.10.8.43:1812 length 176 (3) User-Name = "host/PC08921.uh.something.de" (3) NAS-Identifier = "RD" (3) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Port = 1 (3) Calling-Station-Id = "3C-9C-0F-18-E6-97" (3) Connect-Info = "CONNECT 54Mbps 802.11g" (3) Framed-MTU = 1400 (3) EAP-Message = 0x02e900061900 (3) State = 0x7436d43a76dfcde4be7b78f9b6da9fe2 (3) Message-Authenticator = 0x771dd3985c3a862f29d692a626e614a1 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) if (NAS-Identifier == "RD") { (3) if (NAS-Identifier == "RD") -> TRUE (3) if (NAS-Identifier == "RD") { (3) policy filter_hosts { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name !~ /^host\//) { (3) if (&User-Name !~ /^host\//) -> FALSE (3) } # if (&User-Name) = ok (3) } # policy filter_hosts = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 233 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # if (NAS-Identifier == "RD") = ok (3) if (NAS-Identifier == "UH-SW-5-UV03-01") { (3) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (3) if (NAS-Identifier == "l2tp") { (3) if (NAS-Identifier == "l2tp") -> FALSE (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x7436d43a76dfcde4 (3) eap: Finished EAP session with state 0x7436d43a76dfcde4 (3) eap: Previous EAP request found for state 0x7436d43a76dfcde4, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 234 length 1000 (3) eap: EAP session adding &reply:State = 0x7436d43a77dccde4 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 63 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (3) EAP-Message = 0x01ea03e819406e506f696e74862b687474703a2f2f706b692e67702e7669656c2e64652f706b692f67702d53562d444330322d43412e63726c3082010f06082b06010505070101048201013081fe3081ae06082b060105050730028681a16c6461703a2f2f2f434e3d67702d53562d444330322d43412c (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x7436d43a77dccde4be7b78f9b6da9fe2 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 64 from 10.10.10.10:59601 to 10.10.8.43:1812 length 176 (4) User-Name = "host/PC08921.uh.something.de" (4) NAS-Identifier = "RD" (4) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port = 1 (4) Calling-Station-Id = "3C-9C-0F-18-E6-97" (4) Connect-Info = "CONNECT 54Mbps 802.11g" (4) Framed-MTU = 1400 (4) EAP-Message = 0x02ea00061900 (4) State = 0x7436d43a77dccde4be7b78f9b6da9fe2 (4) Message-Authenticator = 0x5eb0b959e0738d0e4d6e44d902b67f94 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) if (NAS-Identifier == "RD") { (4) if (NAS-Identifier == "RD") -> TRUE (4) if (NAS-Identifier == "RD") { (4) policy filter_hosts { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name !~ /^host\//) { (4) if (&User-Name !~ /^host\//) -> FALSE (4) } # if (&User-Name) = ok (4) } # policy filter_hosts = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 234 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # if (NAS-Identifier == "RD") = ok (4) if (NAS-Identifier == "UH-SW-5-UV03-01") { (4) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (4) if (NAS-Identifier == "l2tp") { (4) if (NAS-Identifier == "l2tp") -> FALSE (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x7436d43a77dccde4 (4) eap: Finished EAP session with state 0x7436d43a77dccde4 (4) eap: Previous EAP request found for state 0x7436d43a77dccde4, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 235 length 961 (4) eap: EAP session adding &reply:State = 0x7436d43a70ddcde4 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 64 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (4) EAP-Message = 0x01eb03c119000de709ec58e62837b2993411cdbde5dd2b988bc253e59b4df0452cf308122202c6e04affb51e178d9c4407f483a5314a96878b11f3b2d1fbd12cf389997cc8d0be34647894e48d50bd337004b43349a901f030cb526c95708d5c946843f1a8b49dc916a147b8dc8c60436774b32137bdc5 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x7436d43a70ddcde4be7b78f9b6da9fe2 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 65 from 10.10.10.10:59601 to 10.10.8.43:1812 length 306 (5) User-Name = "host/PC08921.uh.something.de" (5) NAS-Identifier = "RD" (5) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port = 1 (5) Calling-Station-Id = "3C-9C-0F-18-E6-97" (5) Connect-Info = "CONNECT 54Mbps 802.11g" (5) Framed-MTU = 1400 (5) EAP-Message = 0x02eb008819800000007e160303004610000042410499c0ce949f5a0c34c57f33d1ffd42887b20d7745a5b206c84a22b68dcbd18e2943649267de143d608b61ddf2e5fb1dbe4372ab30716bf69820b8f36c98e24d40140303000101160303002800000000000000007aab25a7176803863b690bc194ea41 (5) State = 0x7436d43a70ddcde4be7b78f9b6da9fe2 (5) Message-Authenticator = 0xb6ff79d8480744fd34f76bd4f2f5007a (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) if (NAS-Identifier == "RD") { (5) if (NAS-Identifier == "RD") -> TRUE (5) if (NAS-Identifier == "RD") { (5) policy filter_hosts { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name !~ /^host\//) { (5) if (&User-Name !~ /^host\//) -> FALSE (5) } # if (&User-Name) = ok (5) } # policy filter_hosts = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 235 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # if (NAS-Identifier == "RD") = ok (5) if (NAS-Identifier == "UH-SW-5-UV03-01") { (5) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (5) if (NAS-Identifier == "l2tp") { (5) if (NAS-Identifier == "l2tp") -> FALSE (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x7436d43a70ddcde4 (5) eap: Finished EAP session with state 0x7436d43a70ddcde4 (5) eap: Previous EAP request found for state 0x7436d43a70ddcde4, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: TLS_accept: SSLv3/TLS write server done (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS read finished (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS write finished (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 236 length 57 (5) eap: EAP session adding &reply:State = 0x7436d43a71dacde4 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 65 from 10.10.8.43:1812 to 10.10.10.10:59601 length 0 (5) EAP-Message = 0x01ec003919001403030001011603030028ad9ef0bc3fccfb2e7186029d414d4c20ad45e891467b69b0a8aa6b7232058702a19352cdf84e832c (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7436d43a71dacde4be7b78f9b6da9fe2 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 66 from 10.10.10.10:59601 to 10.10.8.43:1812 length 211 (6) User-Name = "host/PC08921.uh.something.de" (6) NAS-Identifier = "RD" (6) Called-Station-Id = "00-1A-8C-2C-EB-42:RD" (6) NAS-Port-Type = Wireless-802.11 (6) NAS-Port = 1 (6) Calling-Station-Id = "3C-9C-0F-18-E6-97" (6) Connect-Info = "CONNECT 54Mbps 802.11g" (6) Framed-MTU = 1400 (6) EAP-Message = 0x02ec002919800000001f150303001a00000000000000010592c9bebc85d66395eb0fba647cd5e8d2d8 (6) State = 0x7436d43a71dacde4be7b78f9b6da9fe2 (6) Message-Authenticator = 0xf92a9cc10dd6075a5b0921c894b9ebc4 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) if (NAS-Identifier == "RD") { (6) if (NAS-Identifier == "RD") -> TRUE (6) if (NAS-Identifier == "RD") { (6) policy filter_hosts { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name !~ /^host\//) { (6) if (&User-Name !~ /^host\//) -> FALSE (6) } # if (&User-Name) = ok (6) } # policy filter_hosts = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "host/PC08921.uh.something.de", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 236 length 41 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # if (NAS-Identifier == "RD") = ok (6) if (NAS-Identifier == "UH-SW-5-UV03-01") { (6) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (6) if (NAS-Identifier == "l2tp") { (6) if (NAS-Identifier == "l2tp") -> FALSE (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x7436d43a71dacde4 (6) eap: Finished EAP session with state 0x7436d43a71dacde4 (6) eap: Previous EAP request found for state 0x7436d43a71dacde4, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer indicated complete TLS record size will be 31 bytes (6) eap_peap: Got complete TLS record (31 bytes) (6) eap_peap: [eaptls verify] = length included (6) eap_peap: <<< recv TLS 1.2 [length 0002] (6) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (6) eap_peap: WARNING: No data inside of the tunnel (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state ? (6) eap_peap: ERROR: Tunneled data is invalid (6) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 236 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> host/PC08921.uh.something.de (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (7) Received Access-Request Id 5 from 10.10.10.10:44649 to 10.10.8.43:1812 length 88 (7) User-Name = "REF_AaaUse5" (7) User-Password = "REF_SSLSERTOBCMUUNTE0000ref_sslsertobcmuunte" (7) NAS-Identifier = "ssl" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) if (NAS-Identifier == "RD") { (7) if (NAS-Identifier == "RD") -> FALSE (7) if (NAS-Identifier == "UH-SW-5-UV03-01") { (7) if (NAS-Identifier == "UH-SW-5-UV03-01") -> FALSE (7) if (NAS-Identifier == "l2tp") { (7) if (NAS-Identifier == "l2tp") -> FALSE (7) } # authorize = ok (7) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> REF_AaaUse5 (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 66 from 10.10.8.43:1812 to 10.10.10.10:59601 length 44 (6) EAP-Message = 0x04ec0004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.6 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 5 from 10.10.8.43:1812 to 10.10.10.10:44649 length 20 Waking up in 3.1 seconds. (0) Cleaning up request packet ID 60 with timestamp +10 (1) Cleaning up request packet ID 61 with timestamp +10 (2) Cleaning up request packet ID 62 with timestamp +10 (3) Cleaning up request packet ID 63 with timestamp +10 (4) Cleaning up request packet ID 64 with timestamp +10 (5) Cleaning up request packet ID 65 with timestamp +10 (6) Cleaning up request packet ID 66 with timestamp +10 Waking up in 0.7 seconds. (7) Cleaning up request packet ID 5 with timestamp +11 Thank you very much for your support in advance! Best regards Tom

2 3

Ignoring request to auth... ....from unknown client
by Ray Young 11 Nov '21

11 Nov '21

Hello, Radtest works successfully (confirmed with Access-Accept) when using the loopback (127.0.0.1) address. I’m receiving the following error from radius debug (radiusd -X) when attempting to reach the IP of the freeradius server. Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.x.x port 57243 proto udp I don’t understand why this IP is an unknown client. I have 3 machines in the clients.conf file (including the radius server itself using radtest with the actual IP instead of the loopback) and this is happening to all of them. Clients line from clients.conf follows: # IPv6 Client client localhost_ipv6 { ipv6addr = ::1 secret = testing123 } WLC { ipaddr = 10.124.x.y secret = testing123 } freeradiusserver { ipaddr = 10.224.a.b secret = testing123 } Ali's Machine { ipaddr = 10.124.r.s secret = testing123 Debug output shows that the clients.conf file is being read but is not showing the clients are being loaded. Full debug output below. [root@freeradiusserver etc]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm https://urldefense.proofpoint.com/v2/url?u=http-3A__example.com&d=DwQGaQ&c=… { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=%{%{mschap:NT-Domain}:-corporate.domain.com} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "https://urldefense.proofpoint.com/v2/url?u=http-3A__127.0.0.1_ocsp_-26quot-… use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 50772 Listening on proxy address :: port 34116 Ready to process requests Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp Ready to process requests Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp Ready to process requests Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp Ready to process requests Any help is appreciated. Thanks, Ray

2 1

Assigning and checking against local attribute
by Ara Varter 09 Nov '21

09 Nov '21

I would like specific users to be authorized against specific NAS IP addresses (using FreeRADIUS 3.0.13). For example, user "user1" should only be authenticated it the NAS-IP-Address is one of a set of IP addresses. First, a new local attribute called "My-NAS-Group" was created in the /etc/raddb/dictionary file as a string. Next, the /etc/raddb/mods-available/passwd file, there is a pointer to the file 'test-groups.txt'. passwd poc_groups { filename = /etc/raddb/test-groups.txt format = "*NAS-IP-Address:~My-NAS-Group" hash_size = 300 ignore_nislike = no allow_multiple_keys = no } The test-groups.txt file contains a mapping of IP address to a group name. Based on the 'format' above, the idea is to assign the group name to the local attribute 'My-NAS-Group'. [root@server raddb]# more test-groups.txt 10.8.26.1:g1 10.8.151.137:g1 10.8.151.130:g2 Finally, I would like to use the 'My-NAS-Group' as a match criteria for the user authentication. For example, in the 'users' file: user1 Cleartext-Password := "hello", My-NAS-Group == "g1" Service-Type = Login-User In the /etc/raddb/sites-available/default file, the only change that has been made is to enable 'unix' authentication. This is for authenticating using the local linux server accounts, however this is separate from what I'm trying to do here. In other words, there is no local system account for user "user1". From the debug output there is no reference to "My-NAS-Group" and the authentication fails. The authentication works if the "My-NAS-Group" is removed. What additional configuration is needed in freeradius for the local attribute "My-NAS-Group" to be used as a match criteria in the 'users' file? Thanks A

2 1

FreeRadius Config Validation Case Sensitivity
by Emile Swarts 09 Nov '21

09 Nov '21

Hi, We're using FreeRadius to validate configurations before deploying them to production. radiusd -CX This works great and catches any invalid dictionary keys or values that have been added to /etc/raddb/mods-config/files/authorize: aa-bb-cc-77-88-99 Reply-Message = "hi" I noticed that these validations are not case sensitive though, and this still passes: aa-bb-cc-77-88-99 reply-message = "hi" Is case checking intentionally skipped? Is this still a valid response to send back? Thanks, Emile

3 3

RE: How do I enforce EAP-TLS re-authentication at regular intervals? (INTERNAL)
by Weisteen Per 08 Nov '21

08 Nov '21

> -----Original Message----- > From: Freeradius-Users <freeradius-users- > bounces+per.weisteen=telenor.no(a)lists.freeradius.org> On Behalf Of Alan > DeKok > Sent: tirsdag 10. august 2021 16:03 > To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> > Subject: Re: How do I enforce EAP-TLS re-authentication at regular intervals? > > On Aug 10, 2021, at 10:00 AM, Weisteen Per <per.weisteen(a)telenor.no> > wrote: > > > > We're currently deploying numerous devices using 802.1x and EAP-TLS over > wired connections to Cisco switches used as NAS. As of now it seems as if all > supplicants are granted indefinite access - well at least until certificate > expires. > > > > I've been googling for answers to how I might set a session timeout in > Freeradius enforcing a re-authentication by the supplicants at regular > intervals but haven't found a conclusive answer. > > > > Could someone tell if this is a function that may be enforced in Freeradius > (session-timeout ?) or does it have to be enforced by the NAS? > > There's a Session-Timeout attribute. Send it to the NAS, and the NAS will > enforce it: > > post-auth { > ... > update reply { > Session-Timeout := 86400 # force people to re-auth after a > day > } > ... > } > > Alan DeKok. > Hi I've added the statements to the post-auth in sites-enabled/default file and restarted radiusd. I assume the NAS client will only pick up this next time it contacts Freeradius server or could I somehow force it to ? ./PerW

2 1

template user
by Farzad Sadeghi 08 Nov '21

08 Nov '21

Is there a way to use the same functionality as freebsd's pam_radius' "template_user"? the template_user option allows a user to authenticate as a "generic" user with a predefined template using radius on systems where they don't have a local account. -- Farzad Sadeghi project mutator-https://github.com/bloodstalker/mutator

2 1

Re: RadAcct Issue
by Richard J Palmer 03 Nov '21

03 Nov '21

Good Evening (Again) OK Humble pie time.... I think I found and fixed this issue - and after all I said it was in the stored procedure There was some code to track login state based on the radius session - it had some code to be failsafe just in case there was not a session (ie we had a duplicate end session call). Howver while that did not return -1 something within it was triggering FreeTDS and therefore FreeRadius to see a -1. Most odd - I've changed how that works and it seems happy. This was necer a comment / issue specifically about FreeRadius - but more asking if I'd missed anything - and it seems I had... > --- Original message --- > Subject: Re: RadAcct Issue > From: Richard J Palmer <richard(a)merula.net> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Date: Wednesday, 03/11/2021 10:08 PM > > > Good Evening Alan > > This is currently a slightly old install - FreeRADIUS Version 3.0.19. > I have however just upgraded to 3.0.25 and I'm still seeing the same. > I also upgraded unixODBC/FreeTDS to the latest release too - just in > case > > > Just chap from an LNS and data to/from a MS SQL Server. > >> >> >>> >>> >>> Running the Query on the MS SQL server I see: >>> >>> --- >>> (1 row affected) >>> >>> (1 row affected) >>> >>> --- >>> >>> So it is correctly updating records - the stored procedure is safe as >>> long as it returns success. >> >> Well, RADIUS does all kind of asynchronous updates to sessions. >> So >> there's no guarantee that the session database is the same when you >> run the query, and when FreeRADIUS runs the query. >> > > This is actually a session that's ended - the SQL table before the > query shows the data for this session all correct and ended - In this > case it's trying time and time again to update the session to finished > - so radacct (for this session at least) won't be changing - I'm > wondering if this is a result of the update effectively not affecting > the data because it's updating the recored to exacly as it is already? > > >> >> >>> >>> >>> 1) Can you think why FreeRadius is getting -1 as a return. >> >> The TDS / MS-SQL client library is returning that. > Indeed :) >> >> >> >> >>> >>> >>> 2) Given the stored procedure will return an error IF it can't update >>> the data - is there anyway for us to tell FreeRadius to accept and >>> process OK as long as the Query works. >> >> Except that the SQL library says the query *didn't* work. > Agree - badly worded - I meant the Stored procedure is written so > it's virtually impossible for the data we need not to be saved - and I > know there can always be edge cases... > > > As long as we get > > (142) sql1: SQL query returned: success > > It's processed the update OK - I'm happy to share the Stored procedure > if it helps - I'd just prefer it not to be totally in the public. > I know in some cases this may not be acceptable - but in this > particular use case at the end of a session - worse case the process > that cllses zombie sessions will close the session in the background a > bit later on. > > Richard > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html

1 0

RadAcct Issue
by Richard J Palmer 03 Nov '21

03 Nov '21

Good Evening I am seeing something slightly odd here with FreeRadius in some situations. for some (not not all) session closes on RadAcct we are seeing: (142) sql1: SQL-User-Name set to 'myusername@myrealm' (142) sql1: EXPAND EXECUTE radius.[dbo].[proc_RadacctUpdate_1] '%S', '%{Acct-Session-Time}', '%{Acct-Input-Gigawords}', '%{Acct-Input-Octets}', '%{Acct-Output-Gigawords}', '%{Acct-Output-Octets}', '%{Acct-Terminate-Cause}', '%{Acct-Delay-Time}', '%{Connect-Info}', '%{Acct-Session-Id}', '%{NAS-IP-Address}' (142) sql1: --> EXECUTE radius.[dbo].[proc_RadacctUpdate_1] '2021-11-03 19:54:22', '2835', '0', '361059', '0', '357416', 'Lost-Carrier', '', '287000/396000', 'S600000269717108F60302', '1.2.3.4' (142) sql1: EXPAND /usr/local/var/log/radius/accounting.sql (142) sql1: --> /usr/local/var/log/radius/accounting.sql (142) sql1: Executing query: EXECUTE radius.[dbo].[proc_RadacctUpdate_1] '2021-11-03 19:54:22', '2835', '0', '361059', '0', '357416', 'Lost-Carrier', '', '287000/396000', 'S600000269717108F60302', '1.2.3.4' (142) sql1: SQL query returned: success (142) sql1: -1 record(s) updated (142) sql1: No additional queries configured rlm_sql (sql1): Released connection (21) (142) [sql1] = noop (142) [handled] = handled (142) } # redundant = handled (142) } # accounting = handled (142) Not sending reply to client. Note this is using MS SQL via TDS As this is not seeing a positive return from the numbers of records updated - then it does not reply to the NAS and so the NAS tries again and again Running the Query on the MS SQL server I see: --- (1 row affected) (1 row affected) --- So it is correctly updating records - the stored procedure is safe as long as it returns success. 1) Can you think why FreeRadius is getting -1 as a return. 2) Given the stored procedure will return an error IF it can't update the data - is there anyway for us to tell FreeRadius to accept and process OK as long as the Query works. We are not seeing this for all queries - but just some - happy to add as many details as needed here - and it's not pointing the blame at Radius - just trying to understand the oddity for the future Thanks in advance Richard

3 3