February 2021 - Freeradius-Users - lists.freeradius.org

standard attributes
by Hassan, Hazem (Nokia - EG/Cairo) 09 Feb '21

09 Feb '21

Hi , Is there a way to include both standard attributes and VSAa on Freeradius running on Centos7? The below path doesn’t have any dictionaries [root@host-80-194-79-145 share]# cd /usr/share/ [root@host-80-194-79-145 share]# ls | egrep dictionary I am asking because after installation , I get the below error while trying to start "radiusd -X" [root@host-80-194-79-145 share]# systemctl start radiusd.service Job for radiusd.service failed because the control process exited with error code. See "systemctl status radiusd.service" and "journalctl -xe" for details. [root@host-80-194-79-145 share]# systemctl status radiusd.service ● radiusd.service - FreeRADIUS high performance RADIUS server. Loaded: loaded (/usr/lib/systemd/system/radiusd.service; disabled; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2021-02-09 19:02:39 GMT; 11s ago Process: 2874 ExecStartPre=/usr/sbin/radiusd -C (code=exited, status=1/FAILURE) Process: 2872 ExecStartPre=/bin/chown -R radiusd.radiusd /var/run/radiusd (code=exited, status=0/SUCCESS) Feb 09 19:02:38 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: S... Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: r... Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: F... Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: U... Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: r... Hint: Some lines were ellipsized, use -l to show in full. [root@host-80-194-79-145 share]# systemctl status radiusd.service -l ● radiusd.service - FreeRADIUS high performance RADIUS server. Loaded: loaded (/usr/lib/systemd/system/radiusd.service; disabled; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2021-02-09 19:02:39 GMT; 38s ago Process: 2874 ExecStartPre=/usr/sbin/radiusd -C (code=exited, status=1/FAILURE) Process: 2872 ExecStartPre=/bin/chown -R radiusd.radiusd /var/run/radiusd (code=exited, status=0/SUCCESS) Feb 09 19:02:38 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Starting FreeRADIUS high performance RADIUS server.... Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiusd.service: control process exited, code=exited status=1 Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Failed to start FreeRADIUS high performance RADIUS server.. Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Unit radiusd.service entered failed state. Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiusd.service failed. [root@host-80-194-79-145 share]# systemctl stop radiusd.service [root@host-80-194-79-145 share]# systemctl start radiusd.service Job for radiusd.service failed because the control process exited with error code. See "systemctl status radiusd.service" and "journalctl -xe" for details. [root@host-80-194-79-145 share]# journalctl -xe WARNING: terminal is not fully functional Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:32 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:32 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Star-- Subject: Unit radiusd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit radiusd.service has begun starting up. Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Fail-- Subject: Unit radiusd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit radiusd.service has failed. -- -- The result is failed. Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: UnitFeb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:03:37 host-80-194-7lines 1338-1360/1360 (END)edia.com polkitd[24270]: lines 1338-1360/1360 (END) [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# journalctl -xe WARNING: terminal is not fully functional Feb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:02:39 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:32 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:32 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com polkitd[24270]: Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Star-- Subject: Unit radiusd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit radiusd.service has begun starting up. Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: Fail-- Subject: Unit radiusd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit radiusd.service has failed. -- -- The result is failed. Feb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: UnitFeb 09 19:03:37 host-80-194-79-145.static.cable.virginmedia.com systemd[1]: radiFeb 09 19:03:37 host-80-194-7lines 1338-1360/1360 (END)edia.com polkitd[24270]: lines 1338-1360/1360 (END) [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# [root@host-80-194-79-145 share]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp Errors reading /etc/raddb/dictionary: dict_init: /etc/raddb/dictionary[30]: Couldn't open dictionary "/usr/share/freeradius/dictionary.nokia19.txt": No such file or directory Thanks, Hazem

3 4

Unsubscribe
by P. R.M. 09 Feb '21

09 Feb '21

Unsubscribe

1 0

installing Freeradius on Debian 10 (buster)
by Hassan, Hazem (Nokia - EG/Cairo) 09 Feb '21

09 Feb '21

Hi , I have installed freeradius 3.0 on Debian 10 as follows : #sudo apt-get install freeradius And after that I added the BNG on clinets.conf file , adding a test-user for test on users file ... it doesn't work and making some troubles while restarting the freeradius service with "exit code" error. My questions are : * The above command is enough to install freeradius on Debian 10 (buster)? * I didn't add any MySql databas as it should be part of the package , is not ? * I googled and see some sites that drives to have daloRadius along with Debian , however I understand it shouldn't be and they are fully independent? Thanks, Hazem

3 3

Freeradius/Radtest fails to authenticate against Google LDAP
by Christian Bednarz 08 Feb '21

08 Feb '21

Hi all. I try hard to get Freeradius working with Google LDAP, but I feel totally stuck and desperate. My starting point was following the Google documentation ( https://support.google.com/a/answer/9089736?hl=en#zippy=%2Cfreeradius <https://support.google.com/a/answer/9089736?hl=en#zippy=,freeradius> ), which some people pointed to being not really accurate. After some adjustments I find myself stuck in the wood. Admittingly I have just very basic knowledge of Linux (I use Ubuntu 20). When I run radtest I get this result: root@freeradius1:/home/serveradmin# radtest it-test2(a)lanes-planes.com <mailto:it-test2@lanes-planes.com> PASSWORD 127.0.0.1 1 testing123 Sent Access-Request Id 50 from 0.0.0.0:39324 to 127.0.0.1:1812 length 95 User-Name = "it-test2(a)lanes-planes.com <mailto:it-test2@lanes-planes.com>" User-Password = „PASSWORD" NAS-IP-Address = 127.0.1.1 NAS-Port = 1 Message-Authenticator = 0x00 Cleartext-Password = „PASSWORD" Received Access-Reject Id 50 from 127.0.0.1:1812 to 127.0.0.1:39324 length 20 (0) -: Expected Access-Accept got Access-Reject Here is the debug output of freeradius -X: (0) Received Access-Request Id 50 from 127.0.0.1:39324 to 127.0.0.1:1812 length 95 (0) User-Name = "it-test2(a)lanes-planes.com" (0) User-Password = „PASSWORD" (0) NAS-IP-Address = 127.0.1.1 (0) NAS-Port = 1 (0) Message-Authenticator = 0xf9bad2a09e9c1eb0e3c9317b52b40faf (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "lanes-planes.com" for User-Name = "it-test2(a)lanes-planes.com" (0) suffix: Found realm "lanes-planes.com" (0) suffix: Adding Stripped-User-Name = "it-test2" (0) suffix: Adding Realm = "lanes-planes.com" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=it-test2) (0) ldap: Performing search in "dc=lanes-planes,dc=com" with filter "(uid=it-test2)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: Search returned no results rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful (0) [ldap] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := ldap (0) } # update control = noop (0) } # if (User-Password) = noop Not doing PAP as Auth-Type is already set. (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = ldap (0) Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> it-test2(a)lanes-planes.com (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.9 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 50 from 127.0.0.1:1812 to 127.0.0.1:39324 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 50 with timestamp +39 Ready to process requests If anyone of you could point me to the right direction what would be need to be corrected to get this work that would be just awesome. If it helps, I would also be willing to share other config files, like sites-enabled/defaults. Thanks. Best regards Christian

2 1

FreeRadius on Debian Server
by Hassan, Hazem (Nokia - EG/Cairo) 08 Feb '21

08 Feb '21

Hi Experts, I have just installed freeradius on Debian server : root@brlb-WM-services2:/etc/freeradius/3.0# # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster install new FreeRadius on Debian: #sudo apt-get install freeradius root@brlb-WM-services2:/etc/freeradius/3.0# freeradius -v radiusd: FreeRADIUS Version 3.0.17, for host i686-pc-linux-gnu, built on Apr 22 2019 at 21:23:36 FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT And while trying to edit radius.client file under /etc/freeradius/3.0 with the BNG address and found that I am not able to use normal key-arrows to edit and even the display is not showing the full file. ...(see below) [cid:image001.jpg@01D6FE52.CC08CAF0] Any idea ? And how to start the radius .. as mentioned above use "radiusd -X" , but seems this is not working as well ? Also I ignored to install MySql and considered it is installed as part of " apt-get install freeradius" ? Thanks, Hazem

4 4

home server stats via radmin
by adrian.p.smith＠bt.com 08 Feb '21

08 Feb '21

We use the radmin tool to gather some metrics about proxied requests going through home servers - great! Is there a way to reset those numbers without doing a server restart? TIA.

2 1

entering multiple AVP into database
by Matt Zagrabelny 06 Feb '21

06 Feb '21

Greetings FR-users, I am seeking some advice for getting a list of AVPs into a database. Our Cisco ASA VPN sends the following vendor attributes to FR: (2) Cisco-AVPair = "mdm-tlv=device-platform=win" (2) Cisco-AVPair = "mdm-tlv=device-mac=5c-3a-45-aa-ff-ee" (2) Cisco-AVPair = "mdm-tlv=device-type=HP HP ProBook 445R G6" (2) Cisco-AVPair = "mdm-tlv=device-platform-version=10.0.18363 " (2) Cisco-AVPair = "mdm-tlv=device-public-mac=5c-3a-45-aa-ff-ee" (2) Cisco-AVPair = "mdm-tlv=ac-user-agent=AnyConnect Windows 4.9.04043" (2) Cisco-AVPair = "mdm-tlv=device-uid-global=8F31836F07DA5CE40D0207A1AB4DFA8200048FC3" (2) Cisco-AVPair = "mdm-tlv=device-uid=9A920780AEEAD2B5496D09DAA6DDCCDD159619CD117D8D000780F6DF3B083C14" After stripping off the leading "mdm-tlv=" of the string I am left with a key, value pair that I'd like to put into the accounting database. I see three database possibilities: 1. Add new fields to the radacct table for the keys above. New fields would be "device-platform", "device-mac", etc. I do not know if the set of fields is fixed or if new ones would be sent along from the NAS. This is one of the downsides of adding new fields to the radacct table. 2. Create a new one to many table that would contain the key, value pairs and a foreign key back to the radacct table. 3. Add a JSONB field to the radacct table and put all of the key, value pairs into a JSONB data structure. Does anyone have any advice as to a sensible path forward for storing this AVP data? Alternatively, does anyone have any success stories of storing AVP data when the NAS gives multiple entries of the same attribute back to FR? Thanks for any dialog. Cheers! -m

2 3

post-auth | ldap-group | huntgroup
by Markus Demmert (BESITEC-DEHAM) 05 Feb '21

05 Feb '21

Good day, I have problems to get this running: ------------------------------------------------------------------------------------------ if (Huntgroup-Name == "cisco-group") { if (Ldap-Group == "Group_Network_Device_RW") { update reply { cisco-avpair = "shell:priv-lvl=15" } } } else { reject } ----------------------------------------------------------------------------------------- I get this debug output: ----------------------------------------------------------------------------------------- (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/ldap-network (0) post-auth { (0) if (Huntgroup-Name == "cisco-group") { (0) ERROR: Failed retrieving values required to evaluate condition (0) else { (0) [reject] = reject ----------------------------------------------------------------------------------------- When I remove the huntgroup line it is working and I can authenticate against a network device. But in combination with the huntgroup I get this error. What I am doing wrong? Can someone point me in the right direction. Many thanks, MaDe

2 5

windows 10 failing to connect to 802.1x wifi network
by Gary Nevills 04 Feb '21

04 Feb '21

I've recently setup freeradius and configured an ssid to use 802.1x authentication with this server. So far android, ipad, chromebook, and macOS devices seem to be connecting fine. Windows 10 devices are not working (seem to be failing at the radius level), following is the freeradius debugging info for one of these failed connections from a Windows 10 laptop. laptop: hp elitebook 750 g1 server: ubuntu 20.04.1 lts in aws FreeRADIUS Version 3.0.20 OpenSSL 1.1.1f 31 Mar 2020 Configured for PEAP/MSCHAPv2 Does anyone have insight into what might be wrong? I’m not sure how to interpret the error message in the debug output. Thanks, Gary root@radius1:~# freeradius -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/rules-default including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testwlc { ipaddr = 10.1.251.2 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testwlc { ipaddr = 10.34.200.0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testwlc { ipaddr = 10.253.195.60 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testwlc { ipaddr = 10.87.89.253 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testwlc { ipaddr = 10.100.102.254 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = ntlm_auth # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "myadsrv.example.com" port = 389 identity = "CN=FreeRADIUS Service Account,OU=Service Accounts,OU=Users,DC=example,DC=com" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "DC=example,DC=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --username=%{mschap:User-Name} --domain=example.com --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=example.com --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = no disable_tlsv1_1 = no disable_tlsv1_2 = no tls_max_version = "1.2" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-peap" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls-config tls-peap { verify_depth = 0 pem_file_type = yes private_key_file = "/etc/ssl/private/peap/server.pem" certificate_file = "/etc/ssl/private/peap/server.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "HIGH" ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:338 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 42319 Listening on proxy address :: port 53610 Ready to process requests (33) Received Access-Request Id 249 from 10.2.4.6:50660 to 10.3.5.7:1812 length 298 (33) User-Name = "tester" (33) Chargeable-User-Identity = 0x02 (33) Location-Capable = Civic-Location (33) Calling-Station-Id = "30-10-b3-c0-6b-a3" (33) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (33) NAS-Port = 8 (33) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (33) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (33) Cisco-AVPair = "mDNS=true" (33) NAS-IP-Address = 10.2.4.6 (33) NAS-Identifier = "cisco8540" (33) Airespace-Wlan-Id = 201 (33) Service-Type = Framed-User (33) Framed-MTU = 1300 (33) NAS-Port-Type = Wireless-802.11 (33) Tunnel-Type:0 = VLAN (33) Tunnel-Medium-Type:0 = IEEE-802 (33) Tunnel-Private-Group-Id:0 = "99" (33) EAP-Message = 0x0202000b01746573746572 (33) Message-Authenticator = 0xebc22bf667969727566cfad2c74234c1 (33) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (33) authorize { (33) policy filter_username { (33) if (&User-Name) { (33) if (&User-Name) -> TRUE (33) if (&User-Name) { (33) if (&User-Name =~ / /) { (33) if (&User-Name =~ / /) -> FALSE (33) if (&User-Name =~ /@[^@]*@/ ) { (33) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (33) if (&User-Name =~ /\.\./ ) { (33) if (&User-Name =~ /\.\./ ) -> FALSE (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (33) if (&User-Name =~ /\.$/) { (33) if (&User-Name =~ /\.$/) -> FALSE (33) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (33) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (33) } # if (&User-Name) = notfound (33) } # policy filter_username = notfound (33) [preprocess] = ok (33) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (33) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (33) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (33) auth_log: EXPAND %t (33) auth_log: --> Wed Feb 3 14:44:03 2021 (33) [auth_log] = ok (33) [chap] = noop (33) [mschap] = noop (33) [digest] = noop (33) suffix: Checking for suffix after "@" (33) suffix: No '@' in User-Name = "tester", looking up realm NULL (33) suffix: No such realm "NULL" (33) [suffix] = noop (33) eap: Peer sent EAP Response (code 2) ID 2 length 11 (33) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (33) [eap] = ok (33) } # authorize = ok (33) Found Auth-Type = eap (33) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (33) authenticate { (33) eap: Peer sent packet with method EAP Identity (1) (33) eap: Calling submodule eap_md5 to process data (33) eap_md5: Issuing MD5 Challenge (33) eap: Sending EAP Request (code 1) ID 3 length 22 (33) eap: EAP session adding &reply:State = 0x0f3943760f3a47ce (33) [eap] = handled (33) } # authenticate = handled (33) Using Post-Auth-Type Challenge (33) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (33) Challenge { ... } # empty sub-section is ignored (33) Sent Access-Challenge Id 249 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (33) EAP-Message = 0x01030016041039024b674355c37e8c5b8f5a83d48496 (33) Message-Authenticator = 0x00000000000000000000000000000000 (33) State = 0x0f3943760f3a47ce8318d8416286d92d (33) Finished request Waking up in 4.9 seconds. (34) Received Access-Request Id 250 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (34) User-Name = "tester" (34) Chargeable-User-Identity = 0x02 (34) Location-Capable = Civic-Location (34) Calling-Station-Id = "30-10-b3-c0-6b-a3" (34) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (34) NAS-Port = 8 (34) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (34) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (34) Cisco-AVPair = "mDNS=true" (34) NAS-IP-Address = 10.2.4.6 (34) NAS-Identifier = "cisco8540" (34) Airespace-Wlan-Id = 201 (34) Service-Type = Framed-User (34) Framed-MTU = 1300 (34) NAS-Port-Type = Wireless-802.11 (34) Tunnel-Type:0 = VLAN (34) Tunnel-Medium-Type:0 = IEEE-802 (34) Tunnel-Private-Group-Id:0 = "99" (34) EAP-Message = 0x020300060319 (34) State = 0x0f3943760f3a47ce8318d8416286d92d (34) Message-Authenticator = 0x2642f2a3b5071ea72fbf703fabaadca0 (34) session-state: No cached attributes (34) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (34) authorize { (34) policy filter_username { (34) if (&User-Name) { (34) if (&User-Name) -> TRUE (34) if (&User-Name) { (34) if (&User-Name =~ / /) { (34) if (&User-Name =~ / /) -> FALSE (34) if (&User-Name =~ /@[^@]*@/ ) { (34) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (34) if (&User-Name =~ /\.\./ ) { (34) if (&User-Name =~ /\.\./ ) -> FALSE (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (34) if (&User-Name =~ /\.$/) { (34) if (&User-Name =~ /\.$/) -> FALSE (34) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (34) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (34) } # if (&User-Name) = notfound (34) } # policy filter_username = notfound (34) [preprocess] = ok (34) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (34) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (34) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (34) auth_log: EXPAND %t (34) auth_log: --> Wed Feb 3 14:44:03 2021 (34) [auth_log] = ok (34) [chap] = noop (34) [mschap] = noop (34) [digest] = noop (34) suffix: Checking for suffix after "@" (34) suffix: No '@' in User-Name = "tester", looking up realm NULL (34) suffix: No such realm "NULL" (34) [suffix] = noop (34) eap: Peer sent EAP Response (code 2) ID 3 length 6 (34) eap: No EAP Start, assuming it's an on-going EAP conversation (34) [eap] = updated (34) [files] = noop rlm_ldap (ldap): Closing connection (14): Hit idle_timeout, was idle for 906 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (15), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (15) (34) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (34) ldap: --> (samaccountname=tester) (34) ldap: Performing search in "DC=example,DC=com" with filter "(samaccountname=tester)", scope "sub" (34) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.example.com/DC=DomainDnsZones,DC=example,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.example.com/DC=ForestDnsZones,DC=example,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://example.com/CN=Configuration,DC=example,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (34) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (15) - Was referred to a different LDAP server Need 3 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (16), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://myadsrv.example.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (34) [ldap] = notfound (34) [expiration] = noop (34) [logintime] = noop Not doing PAP as Auth-Type is already set. (34) [pap] = noop (34) } # authorize = updated (34) Found Auth-Type = eap (34) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (34) authenticate { (34) eap: Expiring EAP session with state 0x0f3943760f3a47ce (34) eap: Finished EAP session with state 0x0f3943760f3a47ce (34) eap: Previous EAP request found for state 0x0f3943760f3a47ce, released from the list (34) eap: Peer sent packet with method EAP NAK (3) (34) eap: Found mutually acceptable type PEAP (25) (34) eap: Calling submodule eap_peap to process data (34) eap_peap: Initiating new TLS session (34) eap_peap: [eaptls start] = request (34) eap: Sending EAP Request (code 1) ID 4 length 6 (34) eap: EAP session adding &reply:State = 0x0f3943760e3d5ace (34) [eap] = handled (34) } # authenticate = handled (34) Using Post-Auth-Type Challenge (34) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (34) Challenge { ... } # empty sub-section is ignored (34) Sent Access-Challenge Id 250 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (34) EAP-Message = 0x010400061920 (34) Message-Authenticator = 0x00000000000000000000000000000000 (34) State = 0x0f3943760e3d5ace8318d8416286d92d (34) Finished request Waking up in 4.9 seconds. (35) Received Access-Request Id 251 from 10.2.4.6:50660 to 10.3.5.7:1812 length 477 (35) User-Name = "tester" (35) Chargeable-User-Identity = 0x02 (35) Location-Capable = Civic-Location (35) Calling-Station-Id = "30-10-b3-c0-6b-a3" (35) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (35) NAS-Port = 8 (35) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (35) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (35) Cisco-AVPair = "mDNS=true" (35) NAS-IP-Address = 10.2.4.6 (35) NAS-Identifier = "cisco8540" (35) Airespace-Wlan-Id = 201 (35) Service-Type = Framed-User (35) Framed-MTU = 1300 (35) NAS-Port-Type = Wireless-802.11 (35) Tunnel-Type:0 = VLAN (35) Tunnel-Medium-Type:0 = IEEE-802 (35) Tunnel-Private-Group-Id:0 = "99" (35) EAP-Message = 0x020400ac1980000000a2160303009d010000990303601ab6b4c30eb5ea5382df19813f1039ff353d17ebedf8df0fa69d760bf733fb00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100 (35) State = 0x0f3943760e3d5ace8318d8416286d92d (35) Message-Authenticator = 0xfad85de13cea9c228689b3cb2f8c3815 (35) session-state: No cached attributes (35) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (35) authorize { (35) policy filter_username { (35) if (&User-Name) { (35) if (&User-Name) -> TRUE (35) if (&User-Name) { (35) if (&User-Name =~ / /) { (35) if (&User-Name =~ / /) -> FALSE (35) if (&User-Name =~ /@[^@]*@/ ) { (35) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (35) if (&User-Name =~ /\.\./ ) { (35) if (&User-Name =~ /\.\./ ) -> FALSE (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (35) if (&User-Name =~ /\.$/) { (35) if (&User-Name =~ /\.$/) -> FALSE (35) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (35) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (35) } # if (&User-Name) = notfound (35) } # policy filter_username = notfound (35) [preprocess] = ok (35) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (35) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (35) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (35) auth_log: EXPAND %t (35) auth_log: --> Wed Feb 3 14:44:03 2021 (35) [auth_log] = ok (35) [chap] = noop (35) [mschap] = noop (35) [digest] = noop (35) suffix: Checking for suffix after "@" (35) suffix: No '@' in User-Name = "tester", looking up realm NULL (35) suffix: No such realm "NULL" (35) [suffix] = noop (35) eap: Peer sent EAP Response (code 2) ID 4 length 172 (35) eap: Continuing tunnel setup (35) [eap] = ok (35) } # authorize = ok (35) Found Auth-Type = eap (35) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (35) authenticate { (35) eap: Expiring EAP session with state 0x0f3943760e3d5ace (35) eap: Finished EAP session with state 0x0f3943760e3d5ace (35) eap: Previous EAP request found for state 0x0f3943760e3d5ace, released from the list (35) eap: Peer sent packet with method EAP PEAP (25) (35) eap: Calling submodule eap_peap to process data (35) eap_peap: Continuing EAP-TLS (35) eap_peap: Peer indicated complete TLS record size will be 162 bytes (35) eap_peap: Got complete TLS record (162 bytes) (35) eap_peap: [eaptls verify] = length included (35) eap_peap: (other): before SSL initialization (35) eap_peap: TLS_accept: before SSL initialization (35) eap_peap: TLS_accept: before SSL initialization (35) eap_peap: <<< recv TLS 1.3 [length 009d] (35) eap_peap: TLS_accept: SSLv3/TLS read client hello (35) eap_peap: >>> send TLS 1.2 [length 005d] (35) eap_peap: TLS_accept: SSLv3/TLS write server hello (35) eap_peap: >>> send TLS 1.2 [length 1240] (35) eap_peap: TLS_accept: SSLv3/TLS write certificate (35) eap_peap: >>> send TLS 1.2 [length 014d] (35) eap_peap: TLS_accept: SSLv3/TLS write key exchange (35) eap_peap: >>> send TLS 1.2 [length 0004] (35) eap_peap: TLS_accept: SSLv3/TLS write server done (35) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (35) eap_peap: TLS - In Handshake Phase (35) eap_peap: TLS - got 5122 bytes of data (35) eap_peap: [eaptls process] = handled (35) eap: Sending EAP Request (code 1) ID 5 length 1024 (35) eap: EAP session adding &reply:State = 0x0f3943760d3c5ace (35) [eap] = handled (35) } # authenticate = handled (35) Using Post-Auth-Type Challenge (35) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (35) Challenge { ... } # empty sub-section is ignored (35) Sent Access-Challenge Id 251 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (35) EAP-Message = 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 (35) Message-Authenticator = 0x00000000000000000000000000000000 (35) State = 0x0f3943760d3c5ace8318d8416286d92d (35) Finished request Waking up in 4.9 seconds. (36) Received Access-Request Id 252 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (36) User-Name = "tester" (36) Chargeable-User-Identity = 0x02 (36) Location-Capable = Civic-Location (36) Calling-Station-Id = "30-10-b3-c0-6b-a3" (36) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (36) NAS-Port = 8 (36) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (36) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (36) Cisco-AVPair = "mDNS=true" (36) NAS-IP-Address = 10.2.4.6 (36) NAS-Identifier = "cisco8540" (36) Airespace-Wlan-Id = 201 (36) Service-Type = Framed-User (36) Framed-MTU = 1300 (36) NAS-Port-Type = Wireless-802.11 (36) Tunnel-Type:0 = VLAN (36) Tunnel-Medium-Type:0 = IEEE-802 (36) Tunnel-Private-Group-Id:0 = "99" (36) EAP-Message = 0x020500061900 (36) State = 0x0f3943760d3c5ace8318d8416286d92d (36) Message-Authenticator = 0x8b811838408540589d046fd8f20f158c (36) session-state: No cached attributes (36) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (36) authorize { (36) policy filter_username { (36) if (&User-Name) { (36) if (&User-Name) -> TRUE (36) if (&User-Name) { (36) if (&User-Name =~ / /) { (36) if (&User-Name =~ / /) -> FALSE (36) if (&User-Name =~ /@[^@]*@/ ) { (36) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (36) if (&User-Name =~ /\.\./ ) { (36) if (&User-Name =~ /\.\./ ) -> FALSE (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (36) if (&User-Name =~ /\.$/) { (36) if (&User-Name =~ /\.$/) -> FALSE (36) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (36) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (36) } # if (&User-Name) = notfound (36) } # policy filter_username = notfound (36) [preprocess] = ok (36) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (36) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (36) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (36) auth_log: EXPAND %t (36) auth_log: --> Wed Feb 3 14:44:03 2021 (36) [auth_log] = ok (36) [chap] = noop (36) [mschap] = noop (36) [digest] = noop (36) suffix: Checking for suffix after "@" (36) suffix: No '@' in User-Name = "tester", looking up realm NULL (36) suffix: No such realm "NULL" (36) [suffix] = noop (36) eap: Peer sent EAP Response (code 2) ID 5 length 6 (36) eap: Continuing tunnel setup (36) [eap] = ok (36) } # authorize = ok (36) Found Auth-Type = eap (36) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (36) authenticate { (36) eap: Expiring EAP session with state 0x0f3943760d3c5ace (36) eap: Finished EAP session with state 0x0f3943760d3c5ace (36) eap: Previous EAP request found for state 0x0f3943760d3c5ace, released from the list (36) eap: Peer sent packet with method EAP PEAP (25) (36) eap: Calling submodule eap_peap to process data (36) eap_peap: Continuing EAP-TLS (36) eap_peap: Peer ACKed our handshake fragment (36) eap_peap: [eaptls verify] = request (36) eap_peap: [eaptls process] = handled (36) eap: Sending EAP Request (code 1) ID 6 length 1020 (36) eap: EAP session adding &reply:State = 0x0f3943760c3f5ace (36) [eap] = handled (36) } # authenticate = handled (36) Using Post-Auth-Type Challenge (36) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (36) Challenge { ... } # empty sub-section is ignored (36) Sent Access-Challenge Id 252 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (36) EAP-Message = 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 (36) Message-Authenticator = 0x00000000000000000000000000000000 (36) State = 0x0f3943760c3f5ace8318d8416286d92d (36) Finished request Waking up in 4.8 seconds. (37) Received Access-Request Id 253 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (37) User-Name = "tester" (37) Chargeable-User-Identity = 0x02 (37) Location-Capable = Civic-Location (37) Calling-Station-Id = "30-10-b3-c0-6b-a3" (37) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (37) NAS-Port = 8 (37) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (37) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (37) Cisco-AVPair = "mDNS=true" (37) NAS-IP-Address = 10.2.4.6 (37) NAS-Identifier = "cisco8540" (37) Airespace-Wlan-Id = 201 (37) Service-Type = Framed-User (37) Framed-MTU = 1300 (37) NAS-Port-Type = Wireless-802.11 (37) Tunnel-Type:0 = VLAN (37) Tunnel-Medium-Type:0 = IEEE-802 (37) Tunnel-Private-Group-Id:0 = "99" (37) EAP-Message = 0x020600061900 (37) State = 0x0f3943760c3f5ace8318d8416286d92d (37) Message-Authenticator = 0x0cfd3f79a0628bc4b1883f7d5aaa2209 (37) session-state: No cached attributes (37) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (37) authorize { (37) policy filter_username { (37) if (&User-Name) { (37) if (&User-Name) -> TRUE (37) if (&User-Name) { (37) if (&User-Name =~ / /) { (37) if (&User-Name =~ / /) -> FALSE (37) if (&User-Name =~ /@[^@]*@/ ) { (37) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (37) if (&User-Name =~ /\.\./ ) { (37) if (&User-Name =~ /\.\./ ) -> FALSE (37) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (37) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (37) if (&User-Name =~ /\.$/) { (37) if (&User-Name =~ /\.$/) -> FALSE (37) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (37) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (37) } # if (&User-Name) = notfound (37) } # policy filter_username = notfound (37) [preprocess] = ok (37) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (37) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (37) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (37) auth_log: EXPAND %t (37) auth_log: --> Wed Feb 3 14:44:03 2021 (37) [auth_log] = ok (37) [chap] = noop (37) [mschap] = noop (37) [digest] = noop (37) suffix: Checking for suffix after "@" (37) suffix: No '@' in User-Name = "tester", looking up realm NULL (37) suffix: No such realm "NULL" (37) [suffix] = noop (37) eap: Peer sent EAP Response (code 2) ID 6 length 6 (37) eap: Continuing tunnel setup (37) [eap] = ok (37) } # authorize = ok (37) Found Auth-Type = eap (37) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (37) authenticate { (37) eap: Expiring EAP session with state 0x0f3943760c3f5ace (37) eap: Finished EAP session with state 0x0f3943760c3f5ace (37) eap: Previous EAP request found for state 0x0f3943760c3f5ace, released from the list (37) eap: Peer sent packet with method EAP PEAP (25) (37) eap: Calling submodule eap_peap to process data (37) eap_peap: Continuing EAP-TLS (37) eap_peap: Peer ACKed our handshake fragment (37) eap_peap: [eaptls verify] = request (37) eap_peap: [eaptls process] = handled (37) eap: Sending EAP Request (code 1) ID 7 length 1020 (37) eap: EAP session adding &reply:State = 0x0f3943760b3e5ace (37) [eap] = handled (37) } # authenticate = handled (37) Using Post-Auth-Type Challenge (37) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (37) Challenge { ... } # empty sub-section is ignored (37) Sent Access-Challenge Id 253 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (37) EAP-Message = 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 (37) Message-Authenticator = 0x00000000000000000000000000000000 (37) State = 0x0f3943760b3e5ace8318d8416286d92d (37) Finished request Waking up in 4.8 seconds. (38) Received Access-Request Id 254 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (38) User-Name = "tester" (38) Chargeable-User-Identity = 0x02 (38) Location-Capable = Civic-Location (38) Calling-Station-Id = "30-10-b3-c0-6b-a3" (38) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (38) NAS-Port = 8 (38) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (38) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (38) Cisco-AVPair = "mDNS=true" (38) NAS-IP-Address = 10.2.4.6 (38) NAS-Identifier = "cisco8540" (38) Airespace-Wlan-Id = 201 (38) Service-Type = Framed-User (38) Framed-MTU = 1300 (38) NAS-Port-Type = Wireless-802.11 (38) Tunnel-Type:0 = VLAN (38) Tunnel-Medium-Type:0 = IEEE-802 (38) Tunnel-Private-Group-Id:0 = "99" (38) EAP-Message = 0x020700061900 (38) State = 0x0f3943760b3e5ace8318d8416286d92d (38) Message-Authenticator = 0x2c651601fc2adea7eddcf1c872d34305 (38) session-state: No cached attributes (38) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (38) authorize { (38) policy filter_username { (38) if (&User-Name) { (38) if (&User-Name) -> TRUE (38) if (&User-Name) { (38) if (&User-Name =~ / /) { (38) if (&User-Name =~ / /) -> FALSE (38) if (&User-Name =~ /@[^@]*@/ ) { (38) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (38) if (&User-Name =~ /\.\./ ) { (38) if (&User-Name =~ /\.\./ ) -> FALSE (38) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (38) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (38) if (&User-Name =~ /\.$/) { (38) if (&User-Name =~ /\.$/) -> FALSE (38) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (38) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (38) } # if (&User-Name) = notfound (38) } # policy filter_username = notfound (38) [preprocess] = ok (38) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (38) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (38) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (38) auth_log: EXPAND %t (38) auth_log: --> Wed Feb 3 14:44:03 2021 (38) [auth_log] = ok (38) [chap] = noop (38) [mschap] = noop (38) [digest] = noop (38) suffix: Checking for suffix after "@" (38) suffix: No '@' in User-Name = "tester", looking up realm NULL (38) suffix: No such realm "NULL" (38) [suffix] = noop (38) eap: Peer sent EAP Response (code 2) ID 7 length 6 (38) eap: Continuing tunnel setup (38) [eap] = ok (38) } # authorize = ok (38) Found Auth-Type = eap (38) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (38) authenticate { (38) eap: Expiring EAP session with state 0x0f3943760b3e5ace (38) eap: Finished EAP session with state 0x0f3943760b3e5ace (38) eap: Previous EAP request found for state 0x0f3943760b3e5ace, released from the list (38) eap: Peer sent packet with method EAP PEAP (25) (38) eap: Calling submodule eap_peap to process data (38) eap_peap: Continuing EAP-TLS (38) eap_peap: Peer ACKed our handshake fragment (38) eap_peap: [eaptls verify] = request (38) eap_peap: [eaptls process] = handled (38) eap: Sending EAP Request (code 1) ID 8 length 1020 (38) eap: EAP session adding &reply:State = 0x0f3943760a315ace (38) [eap] = handled (38) } # authenticate = handled (38) Using Post-Auth-Type Challenge (38) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (38) Challenge { ... } # empty sub-section is ignored (38) Sent Access-Challenge Id 254 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (38) EAP-Message = 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 (38) Message-Authenticator = 0x00000000000000000000000000000000 (38) State = 0x0f3943760a315ace8318d8416286d92d (38) Finished request Waking up in 4.8 seconds. (39) Received Access-Request Id 255 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (39) User-Name = "tester" (39) Chargeable-User-Identity = 0x02 (39) Location-Capable = Civic-Location (39) Calling-Station-Id = "30-10-b3-c0-6b-a3" (39) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (39) NAS-Port = 8 (39) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (39) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (39) Cisco-AVPair = "mDNS=true" (39) NAS-IP-Address = 10.2.4.6 (39) NAS-Identifier = "cisco8540" (39) Airespace-Wlan-Id = 201 (39) Service-Type = Framed-User (39) Framed-MTU = 1300 (39) NAS-Port-Type = Wireless-802.11 (39) Tunnel-Type:0 = VLAN (39) Tunnel-Medium-Type:0 = IEEE-802 (39) Tunnel-Private-Group-Id:0 = "99" (39) EAP-Message = 0x020800061900 (39) State = 0x0f3943760a315ace8318d8416286d92d (39) Message-Authenticator = 0x449b3a995bd9dddf8fd613af9dd5a333 (39) session-state: No cached attributes (39) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (39) authorize { (39) policy filter_username { (39) if (&User-Name) { (39) if (&User-Name) -> TRUE (39) if (&User-Name) { (39) if (&User-Name =~ / /) { (39) if (&User-Name =~ / /) -> FALSE (39) if (&User-Name =~ /@[^@]*@/ ) { (39) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (39) if (&User-Name =~ /\.\./ ) { (39) if (&User-Name =~ /\.\./ ) -> FALSE (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (39) if (&User-Name =~ /\.$/) { (39) if (&User-Name =~ /\.$/) -> FALSE (39) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (39) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (39) } # if (&User-Name) = notfound (39) } # policy filter_username = notfound (39) [preprocess] = ok (39) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (39) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (39) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (39) auth_log: EXPAND %t (39) auth_log: --> Wed Feb 3 14:44:03 2021 (39) [auth_log] = ok (39) [chap] = noop (39) [mschap] = noop (39) [digest] = noop (39) suffix: Checking for suffix after "@" (39) suffix: No '@' in User-Name = "tester", looking up realm NULL (39) suffix: No such realm "NULL" (39) [suffix] = noop (39) eap: Peer sent EAP Response (code 2) ID 8 length 6 (39) eap: Continuing tunnel setup (39) [eap] = ok (39) } # authorize = ok (39) Found Auth-Type = eap (39) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (39) authenticate { (39) eap: Expiring EAP session with state 0x0f3943760a315ace (39) eap: Finished EAP session with state 0x0f3943760a315ace (39) eap: Previous EAP request found for state 0x0f3943760a315ace, released from the list (39) eap: Peer sent packet with method EAP PEAP (25) (39) eap: Calling submodule eap_peap to process data (39) eap_peap: Continuing EAP-TLS (39) eap_peap: Peer ACKed our handshake fragment (39) eap_peap: [eaptls verify] = request (39) eap_peap: [eaptls process] = handled (39) eap: Sending EAP Request (code 1) ID 9 length 1020 (39) eap: EAP session adding &reply:State = 0x0f39437609305ace (39) [eap] = handled (39) } # authenticate = handled (39) Using Post-Auth-Type Challenge (39) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (39) Challenge { ... } # empty sub-section is ignored (39) Sent Access-Challenge Id 255 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (39) EAP-Message = 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 (39) Message-Authenticator = 0x00000000000000000000000000000000 (39) State = 0x0f39437609305ace8318d8416286d92d (39) Finished request Waking up in 4.7 seconds. (40) Received Access-Request Id 0 from 10.2.4.6:50660 to 10.3.5.7:1812 length 311 (40) User-Name = "tester" (40) Chargeable-User-Identity = 0x02 (40) Location-Capable = Civic-Location (40) Calling-Station-Id = "30-10-b3-c0-6b-a3" (40) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (40) NAS-Port = 8 (40) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (40) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (40) Cisco-AVPair = "mDNS=true" (40) NAS-IP-Address = 10.2.4.6 (40) NAS-Identifier = "cisco8540" (40) Airespace-Wlan-Id = 201 (40) Service-Type = Framed-User (40) Framed-MTU = 1300 (40) NAS-Port-Type = Wireless-802.11 (40) Tunnel-Type:0 = VLAN (40) Tunnel-Medium-Type:0 = IEEE-802 (40) Tunnel-Private-Group-Id:0 = "99" (40) EAP-Message = 0x020900061900 (40) State = 0x0f39437609305ace8318d8416286d92d (40) Message-Authenticator = 0x4ef50fcb8cba71f9bd1deb1784b1de0f (40) session-state: No cached attributes (40) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (40) authorize { (40) policy filter_username { (40) if (&User-Name) { (40) if (&User-Name) -> TRUE (40) if (&User-Name) { (40) if (&User-Name =~ / /) { (40) if (&User-Name =~ / /) -> FALSE (40) if (&User-Name =~ /@[^@]*@/ ) { (40) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (40) if (&User-Name =~ /\.\./ ) { (40) if (&User-Name =~ /\.\./ ) -> FALSE (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (40) if (&User-Name =~ /\.$/) { (40) if (&User-Name =~ /\.$/) -> FALSE (40) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (40) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (40) } # if (&User-Name) = notfound (40) } # policy filter_username = notfound (40) [preprocess] = ok (40) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (40) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (40) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (40) auth_log: EXPAND %t (40) auth_log: --> Wed Feb 3 14:44:03 2021 (40) [auth_log] = ok (40) [chap] = noop (40) [mschap] = noop (40) [digest] = noop (40) suffix: Checking for suffix after "@" (40) suffix: No '@' in User-Name = "tester", looking up realm NULL (40) suffix: No such realm "NULL" (40) [suffix] = noop (40) eap: Peer sent EAP Response (code 2) ID 9 length 6 (40) eap: Continuing tunnel setup (40) [eap] = ok (40) } # authorize = ok (40) Found Auth-Type = eap (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (40) authenticate { (40) eap: Expiring EAP session with state 0x0f39437609305ace (40) eap: Finished EAP session with state 0x0f39437609305ace (40) eap: Previous EAP request found for state 0x0f39437609305ace, released from the list (40) eap: Peer sent packet with method EAP PEAP (25) (40) eap: Calling submodule eap_peap to process data (40) eap_peap: Continuing EAP-TLS (40) eap_peap: Peer ACKed our handshake fragment (40) eap_peap: [eaptls verify] = request (40) eap_peap: [eaptls process] = handled (40) eap: Sending EAP Request (code 1) ID 10 length 58 (40) eap: EAP session adding &reply:State = 0x0f39437608335ace (40) [eap] = handled (40) } # authenticate = handled (40) Using Post-Auth-Type Challenge (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (40) Challenge { ... } # empty sub-section is ignored (40) Sent Access-Challenge Id 0 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (40) EAP-Message = 0x010a003a1900714350ce9ae8bea32efb81e92d5c7acceed14e63079e79924ca0e6394fd21b02a61ddf05a5925bb7b579c916030300040e000000 (40) Message-Authenticator = 0x00000000000000000000000000000000 (40) State = 0x0f39437608335ace8318d8416286d92d (40) Finished request Waking up in 4.7 seconds. (41) Received Access-Request Id 1 from 10.2.4.6:50660 to 10.3.5.7:1812 length 441 (41) User-Name = "tester" (41) Chargeable-User-Identity = 0x02 (41) Location-Capable = Civic-Location (41) Calling-Station-Id = "30-10-b3-c0-6b-a3" (41) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (41) NAS-Port = 8 (41) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (41) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (41) Cisco-AVPair = "mDNS=true" (41) NAS-IP-Address = 10.2.4.6 (41) NAS-Identifier = "cisco8540" (41) Airespace-Wlan-Id = 201 (41) Service-Type = Framed-User (41) Framed-MTU = 1300 (41) NAS-Port-Type = Wireless-802.11 (41) Tunnel-Type:0 = VLAN (41) Tunnel-Medium-Type:0 = IEEE-802 (41) Tunnel-Private-Group-Id:0 = "99" (41) EAP-Message = 0x020a008819800000007e1603030046100000424104e4918ae896cd0883124d5fb82b4e483f11343e26f5c6e76902e816885731cda43d81ebba864c3521250d811dbd5bc084fa1dca048d80c40c044d0452defa2aef14030300010116030300280000000000000000faf98b71dbfdffbbe75d7a6bd396ed19c88d88d7dc4d653db976fb5fb0fdeb54 (41) State = 0x0f39437608335ace8318d8416286d92d (41) Message-Authenticator = 0xcde7aff53998d044439a04e3fbd39ca8 (41) session-state: No cached attributes (41) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (41) authorize { (41) policy filter_username { (41) if (&User-Name) { (41) if (&User-Name) -> TRUE (41) if (&User-Name) { (41) if (&User-Name =~ / /) { (41) if (&User-Name =~ / /) -> FALSE (41) if (&User-Name =~ /@[^@]*@/ ) { (41) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (41) if (&User-Name =~ /\.\./ ) { (41) if (&User-Name =~ /\.\./ ) -> FALSE (41) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (41) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (41) if (&User-Name =~ /\.$/) { (41) if (&User-Name =~ /\.$/) -> FALSE (41) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (41) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (41) } # if (&User-Name) = notfound (41) } # policy filter_username = notfound (41) [preprocess] = ok (41) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (41) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (41) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (41) auth_log: EXPAND %t (41) auth_log: --> Wed Feb 3 14:44:03 2021 (41) [auth_log] = ok (41) [chap] = noop (41) [mschap] = noop (41) [digest] = noop (41) suffix: Checking for suffix after "@" (41) suffix: No '@' in User-Name = "tester", looking up realm NULL (41) suffix: No such realm "NULL" (41) [suffix] = noop (41) eap: Peer sent EAP Response (code 2) ID 10 length 136 (41) eap: Continuing tunnel setup (41) [eap] = ok (41) } # authorize = ok (41) Found Auth-Type = eap (41) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (41) authenticate { (41) eap: Expiring EAP session with state 0x0f39437608335ace (41) eap: Finished EAP session with state 0x0f39437608335ace (41) eap: Previous EAP request found for state 0x0f39437608335ace, released from the list (41) eap: Peer sent packet with method EAP PEAP (25) (41) eap: Calling submodule eap_peap to process data (41) eap_peap: Continuing EAP-TLS (41) eap_peap: Peer indicated complete TLS record size will be 126 bytes (41) eap_peap: Got complete TLS record (126 bytes) (41) eap_peap: [eaptls verify] = length included (41) eap_peap: TLS_accept: SSLv3/TLS write server done (41) eap_peap: <<< recv TLS 1.2 [length 0046] (41) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (41) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (41) eap_peap: <<< recv TLS 1.2 [length 0010] (41) eap_peap: TLS_accept: SSLv3/TLS read finished (41) eap_peap: >>> send TLS 1.2 [length 0001] (41) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (41) eap_peap: >>> send TLS 1.2 [length 0010] (41) eap_peap: TLS_accept: SSLv3/TLS write finished (41) eap_peap: (other): SSL negotiation finished successfully (41) eap_peap: TLS - Connection Established (41) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (41) eap_peap: TLS-Session-Version = "TLS 1.2" (41) eap_peap: TLS - got 51 bytes of data (41) eap_peap: [eaptls process] = handled (41) eap: Sending EAP Request (code 1) ID 11 length 57 (41) eap: EAP session adding &reply:State = 0x0f39437607325ace (41) [eap] = handled (41) } # authenticate = handled (41) Using Post-Auth-Type Challenge (41) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (41) Challenge { ... } # empty sub-section is ignored (41) session-state: Saving cached attributes (41) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (41) TLS-Session-Version = "TLS 1.2" (41) Sent Access-Challenge Id 1 from 10.3.5.7:1812 to 10.2.4.6:50660 length 0 (41) EAP-Message = 0x010b0039190014030300010116030300286c036b714dcb4dcd3d17719728289e1c334a609895d945da69b9ab8e5066b534f1cb223ae9e1df47 (41) Message-Authenticator = 0x00000000000000000000000000000000 (41) State = 0x0f39437607325ace8318d8416286d92d (41) Finished request Waking up in 4.7 seconds. (42) Received Access-Request Id 2 from 10.2.4.6:50660 to 10.3.5.7:1812 length 346 (42) User-Name = "tester" (42) Chargeable-User-Identity = 0x02 (42) Location-Capable = Civic-Location (42) Calling-Station-Id = "30-10-b3-c0-6b-a3" (42) Called-Station-Id = "88-75-56-87-a7-b0:MYSSID" (42) NAS-Port = 8 (42) Cisco-AVPair = "audit-session-id=02fb010a00455eafb3b61a60" (42) Acct-Session-Id = "601ab6ac/30:10:b3:c0:6b:a3/4941445" (42) Cisco-AVPair = "mDNS=true" (42) NAS-IP-Address = 10.2.4.6 (42) NAS-Identifier = "cisco8540" (42) Airespace-Wlan-Id = 201 (42) Service-Type = Framed-User (42) Framed-MTU = 1300 (42) NAS-Port-Type = Wireless-802.11 (42) Tunnel-Type:0 = VLAN (42) Tunnel-Medium-Type:0 = IEEE-802 (42) Tunnel-Private-Group-Id:0 = "99" (42) EAP-Message = 0x020b002919800000001f150303001a0000000000000001643239a7d596b18fa6dacc588f2545a4baa8 (42) State = 0x0f39437607325ace8318d8416286d92d (42) Message-Authenticator = 0x944cf0829ab223665478fb206a56c222 (42) Restoring &session-state (42) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (42) &session-state:TLS-Session-Version = "TLS 1.2" (42) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (42) authorize { (42) policy filter_username { (42) if (&User-Name) { (42) if (&User-Name) -> TRUE (42) if (&User-Name) { (42) if (&User-Name =~ / /) { (42) if (&User-Name =~ / /) -> FALSE (42) if (&User-Name =~ /@[^@]*@/ ) { (42) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (42) if (&User-Name =~ /\.\./ ) { (42) if (&User-Name =~ /\.\./ ) -> FALSE (42) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) { (42) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)<mailto:/@(.+)\.(.+)$/)>) -> FALSE (42) if (&User-Name =~ /\.$/) { (42) if (&User-Name =~ /\.$/) -> FALSE (42) if (&User-Name =~ /(a)\./<mailto:/@\./>) { (42) if (&User-Name =~ /(a)\./<mailto:/@\./>) -> FALSE (42) } # if (&User-Name) = notfound (42) } # policy filter_username = notfound (42) [preprocess] = ok (42) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (42) auth_log: --> /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (42) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.2.4.6/auth-detail-20210203 (42) auth_log: EXPAND %t (42) auth_log: --> Wed Feb 3 14:44:03 2021 (42) [auth_log] = ok (42) [chap] = noop (42) [mschap] = noop (42) [digest] = noop (42) suffix: Checking for suffix after "@" (42) suffix: No '@' in User-Name = "tester", looking up realm NULL (42) suffix: No such realm "NULL" (42) [suffix] = noop (42) eap: Peer sent EAP Response (code 2) ID 11 length 41 (42) eap: Continuing tunnel setup (42) [eap] = ok (42) } # authorize = ok (42) Found Auth-Type = eap (42) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (42) authenticate { (42) eap: Expiring EAP session with state 0x0f39437607325ace (42) eap: Finished EAP session with state 0x0f39437607325ace (42) eap: Previous EAP request found for state 0x0f39437607325ace, released from the list (42) eap: Peer sent packet with method EAP PEAP (25) (42) eap: Calling submodule eap_peap to process data (42) eap_peap: Continuing EAP-TLS (42) eap_peap: Peer indicated complete TLS record size will be 31 bytes (42) eap_peap: Got complete TLS record (31 bytes) (42) eap_peap: [eaptls verify] = length included (42) eap_peap: <<< recv TLS 1.2 [length 0002] (42) eap_peap: ERROR: TLS Alert read:fatal:access denied (42) eap_peap: SSL_read Error (42) eap_peap: ERROR: Error in fragmentation logic (42) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094419:SSL routines:ssl3_read_bytes:tlsv1 alert access denied (42) eap_peap: ERROR: [eaptls process] = fail (42) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (42) eap: Sending EAP Failure (code 4) ID 11 length 4 (42) eap: Failed in EAP select (42) [eap] = invalid (42) } # authenticate = invalid (42) Failed to authenticate the user (42) Using Post-Auth-Type Reject (42) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (42) Post-Auth-Type REJECT { (42) attr_filter.access_reject: EXPAND %{User-Name} (42) attr_filter.access_reject: --> tester (42) attr_filter.access_reject: Matched entry DEFAULT at line 11 (42) [attr_filter.access_reject] = updated (42) [eap] = noop (42) policy remove_reply_message_if_eap { (42) if (&reply:EAP-Message && &reply:Reply-Message) { (42) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (42) else { (42) [noop] = noop (42) } # else = noop (42) } # policy remove_reply_message_if_eap = noop (42) } # Post-Auth-Type REJECT = updated (42) Login incorrect (eap_peap: TLS Alert read:fatal:access denied): [tester] (from client testwlc port 8 cli 30-10-b3-c0-6b-a3) (42) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (42) Sending delayed response (42) Sent Access-Reject Id 2 from 10.3.5.7:1812 to 10.2.4.6:50660 length 44 (42) EAP-Message = 0x040b0004 (42) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. (33) Cleaning up request packet ID 249 with timestamp +1954 (34) Cleaning up request packet ID 250 with timestamp +1954 (35) Cleaning up request packet ID 251 with timestamp +1954 (36) Cleaning up request packet ID 252 with timestamp +1954 (37) Cleaning up request packet ID 253 with timestamp +1954 (38) Cleaning up request packet ID 254 with timestamp +1954 (39) Cleaning up request packet ID 255 with timestamp +1954 (40) Cleaning up request packet ID 0 with timestamp +1954 (41) Cleaning up request packet ID 1 with timestamp +1954 (42) Cleaning up request packet ID 2 with timestamp +1954 Ready to process requests

1 1

Recommended IP pool module + IPv6 + stickiness
by Vegard Svanberg 03 Feb '21

03 Feb '21

Hi, I'm looking into centralising PPPoE IP address pool assignment/distribution and am setting up a test environment. Backend is SQL. I looked into sqlippool and sqlhpwippool, without managing to decide whether one is better than the other. Any suggestions? Just pick one and go with it? Then there's IPv6. As far as I can see the above modules don't support v6. This is not a major blocker as we could assign large enough pools to the NASes and let them handle v6 assignments. But still would be nice to have this centrally. Are there any modules supporting v6 yet? Lastly: Currently the NAS devices have a "semi-sticky" assignment policy. If a client disconnects and reconnects, they'll usually get the same IP. This is not configurable, so I don't know the internals (like timeout etc). Just wondering if it's straight-forward to mimic this in FR. Thanks in advance! -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

3 4