May 2021 - Freeradius-Users - lists.freeradius.org

Some Random Questions
by mohamed almeshal 28 May '21

28 May '21

dear all , Thanks For you kind to support us . I have some issues about freeRadius installation * First : I discover issue may be mislead , but I will descript it to yours , if I connect the mikrotik NAS with my freeradius service and the users being auth before with other freeradius service my server open session in radacct and consider them valid even if some of them have not radcheck data .(strange) . * Second : how I can run external script that run by freeradius in the sites-available default to acct as cron job , I know how to run cron job but I would to like to sync it with freeradius .

2 1

help
by Aravind Voonna 28 May '21

28 May '21

Hello Saver, I am setting up freeradius on aws and using jumpcloud ldap server for authorization. I am able to successfully test from Ruckus wireless controller and radius sever with PAP protocol. I am struck when user try to connect to SSID and it is getting fail(Based on logs able to find the issue but unable to fix it). The below are the output 1. The first output Successful from wireless controller 2. The Second output is failing from the end user. The user using EAP-EPAP-MS-CHAPV2 protocol. The below logs shows Successful when tested from the wireless controller Received Access-Request Id 24 from 10.101.0.11:48304 to 10.92.8.117:1812 length 98 (0) NAS-Port-Type = Virtual (0) NAS-Port = 8443 (0) User-Name = "jbravo" (0) NAS-IP-Address = 10.101.0.11 (0) User-Password = "test123" (0) Message-Authenticator = 0xc1a60741181e7bc02db76b6f69ebc9e2 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@ [^@]*@/ ) { (0) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=jbravo) (0) ldap: Performing search in "o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" with filter "(uid=jbravo)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=jbravo,ou=Users,o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" (0) ldap: Processing user attributes (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.jumpcloud.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) if ((ok || updated) && User-Password) { (0) if ((ok || updated) && User-Password) -> TRUE (0) if ((ok || updated) && User-Password) { (0) update { (0) control:Auth-Type := LDAP (0) } # update = noop (0) } # if ((ok || updated) && User-Password) = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "jbravo" (0) ldap: Using user DN from request "uid=jbravo,ou=Users,o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=jbravo,ou=Users,o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" was successful rlm_ldap (ldap): Released connection (1) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Login OK: [jbravo/test123] (from client 10.101.0.11 port 8443) (0) Sent Access-Accept Id 24 from 10.92.8.117:1812 to 10.101.0.11:48304 length 0 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 24 with timestamp +6 Ready to process requests The below logs shows un Successful when tested from the End users. (0) Received Access-Request Id 24 from 10.101.0.11:52709 to 10.92.8.117:1812 length 402 (0) Acct-Session-Id = "60AFFFDC-63EDA801" (0) User-Name = "jbravo" (0) NAS-IP-Address = 10.101.0.200 (0) NAS-Identifier = "34-FA-9F-1E-F3-9D" (0) NAS-Port = 1 (0) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (0) Calling-Station-Id = "38-F9-D3-49-E4-A7" (0) Location-Data = 0x313055531708466c6578706f7274 (0) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (0) Service-Type = Framed-User (0) Chargeable-User-Identity = 0x00 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 802.11a/n" (0) EAP-Message = 0x0200000b016a627261766f (0) Ruckus-SSID = "Test-SSID" (0) Ruckus-BSSID = 0x34fa9f1ef39d (0) Ruckus-Location = "Flexport" (0) Ruckus-VLAN-ID = 120 (0) Ruckus-SCG-CBlade-IP = 174391307 (0) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (0) Ruckus-Zone-Name = "Default Zone" (0) Ruckus-Wlan-Name = "Test-SSID" (0) Message-Authenticator = 0x1bf0f80960b3b00bf9719408806d4923 (0) Event-Timestamp = "May 27 2021 20:23:57 UTC" (0) Proxy-State = 0x3538 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@ [^@]*@/ ) { (0) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xf9bf494bf9be4d72 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 24 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (0) EAP-Message = 0x01010016041077b76baf88936949dd8dd946f20208d7 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xf9bf494bf9be4d728434925772015f5c (0) Proxy-State = 0x3538 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 114 from 10.101.0.11:52709 to 10.92.8.117:1812 length 417 (1) Acct-Session-Id = "60AFFFDC-63EDA801" (1) User-Name = "jbravo" (1) NAS-IP-Address = 10.101.0.200 (1) NAS-Identifier = "34-FA-9F-1E-F3-9D" (1) NAS-Port = 1 (1) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (1) Calling-Station-Id = "38-F9-D3-49-E4-A7" (1) Location-Data = 0x313055531708466c6578706f7274 (1) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (1) Service-Type = Framed-User (1) Chargeable-User-Identity = 0x00 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 802.11a/n" (1) EAP-Message = 0x020100080319152b (1) State = 0xf9bf494bf9be4d728434925772015f5c (1) Ruckus-SSID = "Test-SSID" (1) Ruckus-BSSID = 0x34fa9f1ef39d (1) Ruckus-Location = "Flexport" (1) Ruckus-VLAN-ID = 120 (1) Ruckus-SCG-CBlade-IP = 174391307 (1) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (1) Ruckus-Zone-Name = "Default Zone" (1) Ruckus-Wlan-Name = "Test-SSID" (1) Message-Authenticator = 0x2643fdb096ce639704bee8f89e2b537f (1) Event-Timestamp = "May 27 2021 20:23:57 UTC" (1) Proxy-State = 0x3539 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@ [^@]*@/ ) { (1) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=jbravo) (1) ldap: Performing search in "o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" with filter "(uid=jbravo)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=jbravo,ou=Users,o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" (1) ldap: Processing user attributes (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.jumpcloud.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = ok (1) if ((ok || updated) && User-Password) { (1) if ((ok || updated) && User-Password) -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (1) pap: WARNING: Authentication will fail unless a "known good" password is available (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xf9bf494bf9be4d72 (1) eap: Finished EAP session with state 0xf9bf494bf9be4d72 (1) eap: Previous EAP request found for state 0xf9bf494bf9be4d72, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0xf9bf494bf8bd5072 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 114 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xf9bf494bf8bd50728434925772015f5c (1) Proxy-State = 0x3539 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 33 from 10.101.0.11:52709 to 10.92.8.117:1812 length 570 (2) Acct-Session-Id = "60AFFFDC-63EDA801" (2) User-Name = "jbravo" (2) NAS-IP-Address = 10.101.0.200 (2) NAS-Identifier = "34-FA-9F-1E-F3-9D" (2) NAS-Port = 1 (2) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (2) Calling-Station-Id = "38-F9-D3-49-E4-A7" (2) Location-Data = 0x313055531708466c6578706f7274 (2) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (2) Service-Type = Framed-User (2) Chargeable-User-Identity = 0x00 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 802.11a/n" (2) EAP-Message = 0x020200a119800000009716030100920100008e030360afff874559f23a4fe2eb589086b11fcf6123898607062be507bf6fbec6637c00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (2) State = 0xf9bf494bf8bd50728434925772015f5c (2) Ruckus-SSID = "Test-SSID" (2) Ruckus-BSSID = 0x34fa9f1ef39d (2) Ruckus-Location = "Flexport" (2) Ruckus-VLAN-ID = 120 (2) Ruckus-SCG-CBlade-IP = 174391307 (2) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (2) Ruckus-Zone-Name = "Default Zone" (2) Ruckus-Wlan-Name = "Test-SSID" (2) Message-Authenticator = 0x2b5e7aadb650ab3d487a3f6ef7362b16 (2) Event-Timestamp = "May 27 2021 20:23:57 UTC" (2) Proxy-State = 0x3630 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@ [^@]*@/ ) { (2) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xf9bf494bf8bd5072 (2) eap: Finished EAP session with state 0xf9bf494bf8bd5072 (2) eap: Previous EAP request found for state 0xf9bf494bf8bd5072, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0092] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 031d] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0xf9bf494bfbbc5072 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 33 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (2) EAP-Message = 0x010303ec19c0000004bf160303003d02000039030327db8c0f6ee41fab75087da76489fc2d9bfc89e57d2944216132b1eaf5ab1f3300c030000011ff01000100000b00040300010200170000160303031d0b0003190003160003133082030f308201f7a00302010202143ca230b5bc4180f9d6a6723cb5 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xf9bf494bfbbc50728434925772015f5c (2) Proxy-State = 0x3630 (2) Finished request Waking up in 4.7 seconds. (3) Received Access-Request Id 22 from 10.101.0.11:52709 to 10.92.8.117:1812 length 415 (3) Acct-Session-Id = "60AFFFDC-63EDA801" (3) User-Name = "jbravo" (3) NAS-IP-Address = 10.101.0.200 (3) NAS-Identifier = "34-FA-9F-1E-F3-9D" (3) NAS-Port = 1 (3) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (3) Calling-Station-Id = "38-F9-D3-49-E4-A7" (3) Location-Data = 0x313055531708466c6578706f7274 (3) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (3) Service-Type = Framed-User (3) Chargeable-User-Identity = 0x00 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 802.11a/n" (3) EAP-Message = 0x020300061900 (3) State = 0xf9bf494bfbbc50728434925772015f5c (3) Ruckus-SSID = "Test-SSID" (3) Ruckus-BSSID = 0x34fa9f1ef39d (3) Ruckus-Location = "Flexport" (3) Ruckus-VLAN-ID = 120 (3) Ruckus-SCG-CBlade-IP = 174391307 (3) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (3) Ruckus-Zone-Name = "Default Zone" (3) Ruckus-Wlan-Name = "Test-SSID" (3) Message-Authenticator = 0x29446b16c3fd7c269aebcd968068c141 (3) Event-Timestamp = "May 27 2021 20:23:57 UTC" (3) Proxy-State = 0x3631 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@ [^@]*@/ ) { (3) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xf9bf494bfbbc5072 (3) eap: Finished EAP session with state 0xf9bf494bfbbc5072 (3) eap: Previous EAP request found for state 0xf9bf494bfbbc5072, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 227 (3) eap: EAP session adding &reply:State = 0xf9bf494bfabb5072 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 22 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (3) EAP-Message = 0x010400e3190043108c5e37fc5173a1eab3da1681e33c5ff2e6723860364c7ab878f9d2a5fc2e330717fa22a1db4a165c52675c18f002510d1c2a94ec228a7ce43690e58a3caae2ff74351d68680fda9ea37abea83ce32323150c45010b6fa2deeca32c20684dc1e1f9544b8e24fc846d013832fada5f10 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xf9bf494bfabb50728434925772015f5c (3) Proxy-State = 0x3631 (3) Finished request Waking up in 4.6 seconds. (4) Received Access-Request Id 15 from 10.101.0.11:52709 to 10.92.8.117:1812 length 545 (4) Acct-Session-Id = "60AFFFDC-63EDA801" (4) User-Name = "jbravo" (4) NAS-IP-Address = 10.101.0.200 (4) NAS-Identifier = "34-FA-9F-1E-F3-9D" (4) NAS-Port = 1 (4) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (4) Calling-Station-Id = "38-F9-D3-49-E4-A7" (4) Location-Data = 0x313055531708466c6578706f7274 (4) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (4) Service-Type = Framed-User (4) Chargeable-User-Identity = 0x00 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 802.11a/n" (4) EAP-Message = 0x0204008819800000007e16030300461000004241046adff3f70658dacfa5fb7077bfa6de6c4b8dfb03c7af28f644517b3cd892a3bc4bcf98ffab473240e01e0825efd4121a571286bfff3fa4c4533656d66ca6f59c1403030001011603030028fceea2d46915019fef16258537f3489befc01ab1f735a9 (4) State = 0xf9bf494bfabb50728434925772015f5c (4) Ruckus-SSID = "Test-SSID" (4) Ruckus-BSSID = 0x34fa9f1ef39d (4) Ruckus-Location = "Flexport" (4) Ruckus-VLAN-ID = 120 (4) Ruckus-SCG-CBlade-IP = 174391307 (4) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (4) Ruckus-Zone-Name = "Default Zone" (4) Ruckus-Wlan-Name = "Test-SSID" (4) Message-Authenticator = 0x090fbde536e5b852dd9be889d43a8ae5 (4) Event-Timestamp = "May 27 2021 20:23:58 UTC" (4) Proxy-State = 0x3632 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@ [^@]*@/ ) { (4) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xf9bf494bfabb5072 (4) eap: Finished EAP session with state 0xf9bf494bfabb5072 (4) eap: Previous EAP request found for state 0xf9bf494bfabb5072, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 57 (4) eap: EAP session adding &reply:State = 0xf9bf494bfdba5072 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 15 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (4) EAP-Message = 0x010500391900140303000101160303002844d27775faa9562ee90f3dc59b42d509f8ba7db956978a9b8f06854def617762d2bd1315ee4f2fad (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xf9bf494bfdba50728434925772015f5c (4) Proxy-State = 0x3632 (4) Finished request Waking up in 4.4 seconds. (5) Received Access-Request Id 28 from 10.101.0.11:52709 to 10.92.8.117:1812 length 415 (5) Acct-Session-Id = "60AFFFDC-63EDA801" (5) User-Name = "jbravo" (5) NAS-IP-Address = 10.101.0.200 (5) NAS-Identifier = "34-FA-9F-1E-F3-9D" (5) NAS-Port = 1 (5) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (5) Calling-Station-Id = "38-F9-D3-49-E4-A7" (5) Location-Data = 0x313055531708466c6578706f7274 (5) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (5) Service-Type = Framed-User (5) Chargeable-User-Identity = 0x00 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 802.11a/n" (5) EAP-Message = 0x020500061900 (5) State = 0xf9bf494bfdba50728434925772015f5c (5) Ruckus-SSID = "Test-SSID" (5) Ruckus-BSSID = 0x34fa9f1ef39d (5) Ruckus-Location = "Flexport" (5) Ruckus-VLAN-ID = 120 (5) Ruckus-SCG-CBlade-IP = 174391307 (5) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (5) Ruckus-Zone-Name = "Default Zone" (5) Ruckus-Wlan-Name = "Test-SSID" (5) Message-Authenticator = 0x408947a0e4706e031992986fd472d3aa (5) Event-Timestamp = "May 27 2021 20:23:58 UTC" (5) Proxy-State = 0x3633 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@ [^@]*@/ ) { (5) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xf9bf494bfdba5072 (5) eap: Finished EAP session with state 0xf9bf494bfdba5072 (5) eap: Previous EAP request found for state 0xf9bf494bfdba5072, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 6 length 40 (5) eap: EAP session adding &reply:State = 0xf9bf494bfcb95072 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 28 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (5) EAP-Message = 0x010600281900170303001d44d27775faa9562f860a214332a8b88cb56b78b1dc45b513fc809cd0de (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xf9bf494bfcb950728434925772015f5c (5) Proxy-State = 0x3633 (5) Finished request Waking up in 4.3 seconds. (6) Received Access-Request Id 246 from 10.101.0.11:52709 to 10.92.8.117:1812 length 451 (6) Acct-Session-Id = "60AFFFDC-63EDA801" (6) User-Name = "jbravo" (6) NAS-IP-Address = 10.101.0.200 (6) NAS-Identifier = "34-FA-9F-1E-F3-9D" (6) NAS-Port = 1 (6) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (6) Calling-Station-Id = "38-F9-D3-49-E4-A7" (6) Location-Data = 0x313055531708466c6578706f7274 (6) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (6) Service-Type = Framed-User (6) Chargeable-User-Identity = 0x00 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 802.11a/n" (6) EAP-Message = 0x0206002a1900170303001ffceea2d4691501a0215f206a094377d092a0b457d517ce021dabbf5a874639 (6) State = 0xf9bf494bfcb950728434925772015f5c (6) Ruckus-SSID = "Test-SSID" (6) Ruckus-BSSID = 0x34fa9f1ef39d (6) Ruckus-Location = "Flexport" (6) Ruckus-VLAN-ID = 120 (6) Ruckus-SCG-CBlade-IP = 174391307 (6) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (6) Ruckus-Zone-Name = "Default Zone" (6) Ruckus-Wlan-Name = "Test-SSID" (6) Message-Authenticator = 0xc155f5983b76b93cd094c25343ba3cba (6) Event-Timestamp = "May 27 2021 20:23:58 UTC" (6) Proxy-State = 0x3634 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@ [^@]*@/ ) { (6) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 42 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xf9bf494bfcb95072 (6) eap: Finished EAP session with state 0xf9bf494bfcb95072 (6) eap: Previous EAP request found for state 0xf9bf494bfcb95072, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - jbravo (6) eap_peap: Got inner identity 'jbravo' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0206000b016a627261766f (6) eap_peap: Setting User-Name to jbravo (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0206000b016a627261766f (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "jbravo" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0206000b016a627261766f (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "jbravo" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@ [^@]*@/ ) { (6) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 43 (6) eap: EAP session adding &reply:State = 0x5142877d51459d3b (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0107002b1a010700261064a3e73203b60a5e6a284e0cae57c6ff667265657261646975732d332e302e3136 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x5142877d51459d3bd1da68a4da6421df (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0107002b1a010700261064a3e73203b60a5e6a284e0cae57c6ff667265657261646975732d332e302e3136 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x5142877d51459d3bd1da68a4da6421df (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0107002b1a010700261064a3e73203b60a5e6a284e0cae57c6ff667265657261646975732d332e302e3136 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x5142877d51459d3bd1da68a4da6421df (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 7 length 74 (6) eap: EAP session adding &reply:State = 0xf9bf494bffb85072 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 246 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (6) EAP-Message = 0x0107004a1900170303003f44d27775faa9563083be65c4a5fe6097f85bcc0bb900708c0b5715ce1728ce226d72b48d9e3fde97c1450e68cc03bf2bdd15662a74350183c4ee4d9b973751 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xf9bf494bffb850728434925772015f5c (6) Proxy-State = 0x3634 (6) Finished request Waking up in 4.2 seconds. (7) Received Access-Request Id 13 from 10.101.0.11:52709 to 10.92.8.117:1812 length 505 (7) Acct-Session-Id = "60AFFFDC-63EDA801" (7) User-Name = "jbravo" (7) NAS-IP-Address = 10.101.0.200 (7) NAS-Identifier = "34-FA-9F-1E-F3-9D" (7) NAS-Port = 1 (7) Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" (7) Calling-Station-Id = "38-F9-D3-49-E4-A7" (7) Location-Data = 0x313055531708466c6578706f7274 (7) Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 (7) Service-Type = Framed-User (7) Chargeable-User-Identity = 0x00 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 802.11a/n" (7) EAP-Message = 0x0207006019001703030055fceea2d4691501a1420d27eba2857973934506cbf68a3331771c94b497d83ed6cac928f0c4c6d96c101904ac2006409f84425776da4f7490a56477ced0121f87f5deccdafbbfd831f8a4158de7e5b929aa65fce0ff (7) State = 0xf9bf494bffb850728434925772015f5c (7) Ruckus-SSID = "Test-SSID" (7) Ruckus-BSSID = 0x34fa9f1ef39d (7) Ruckus-Location = "Flexport" (7) Ruckus-VLAN-ID = 120 (7) Ruckus-SCG-CBlade-IP = 174391307 (7) Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e (7) Ruckus-Zone-Name = "Default Zone" (7) Ruckus-Wlan-Name = "Test-SSID" (7) Message-Authenticator = 0x381e04b0e75ba71bc96bf8ff666637f9 (7) Event-Timestamp = "May 27 2021 20:23:58 UTC" (7) Proxy-State = 0x3635 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@ [^@]*@/ ) { (7) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 96 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x5142877d51459d3b (7) eap: Finished EAP session with state 0xf9bf494bffb85072 (7) eap: Previous EAP request found for state 0xf9bf494bffb85072, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020700411a0207003c31bc81337089bbc2b31b3a7539bb08f38b0000000000000000bbeaf4504cbbfdc66d26cdd91abada9c56c5dc800abb1c62006a627261766f (7) eap_peap: Setting User-Name to jbravo (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020700411a0207003c31bc81337089bbc2b31b3a7539bb08f38b0000000000000000bbeaf4504cbbfdc66d26cdd91abada9c56c5dc800abb1c62006a627261766f (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "jbravo" (7) eap_peap: State = 0x5142877d51459d3bd1da68a4da6421df (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020700411a0207003c31bc81337089bbc2b31b3a7539bb08f38b0000000000000000bbeaf4504cbbfdc66d26cdd91abada9c56c5dc800abb1c62006a627261766f (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "jbravo" (7) State = 0x5142877d51459d3bd1da68a4da6421df (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@ [^@]*@/ ) { (7) if (&User-Name =~ /@ [^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "jbravo", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 65 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (uid=jbravo) (7) ldap: Performing search in "o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" with filter "(uid=jbravo)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "uid=jbravo,ou=Users,o=605d181e43609a22cde87434,dc=jumpcloud,dc=com" (7) ldap: Processing user attributes (7) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.jumpcloud.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) [ldap] = ok (7) if ((ok || updated) && User-Password) { (7) if ((ok || updated) && User-Password) -> FALSE (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x5142877d51459d3b (7) eap: Finished EAP session with state 0x5142877d51459d3b (7) eap: Previous EAP request found for state 0x5142877d51459d3b, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (7) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (7) mschap: Creating challenge hash with username: jbravo (7) mschap: Client is using MS-CHAPv2 (7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) [mschap] = reject (7) } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 7 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> jbravo (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = "\007E=691 R=1 C=d9508c1d006920be86d71572e179b79d V=3 M=Authentication rejected" (7) EAP-Message = 0x04070004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=d9508c1d006920be86d71572e179b79d V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=d9508c1d006920be86d71572e179b79d V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04070004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 8 length 46 (7) eap: EAP session adding &reply:State = 0xf9bf494bfeb75072 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (7) Sent Access-Challenge Id 13 from 10.92.8.117:1812 to 10.101.0.11:52709 length 0 (7) EAP-Message = 0x0108002e1900170303002344d27775faa956313f2966d9d96073e4fcd307c85f8a982c8da2272f49b17679a2f207 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xf9bf494bfeb750728434925772015f5c (7) Proxy-State = 0x3635 (7) Finished request Waking up in 4.1 seconds. ([image: 😎] Received Access-Request Id 230 from 10.101.0.11:52709 to 10.92.8.117:1812 length 455 ([image: 😎] Acct-Session-Id = "60AFFFDC-63EDA801" ([image: 😎] User-Name = "jbravo" ([image: 😎] NAS-IP-Address = 10.101.0.200 ([image: 😎] NAS-Identifier = "34-FA-9F-1E-F3-9D" ([image: 😎] NAS-Port = 1 ([image: 😎] Called-Station-Id = "34-FA-9F-1E-F3-9D:Test-SSID" ([image: 😎] Calling-Station-Id = "38-F9-D3-49-E4-A7" ([image: 😎] Location-Data = 0x313055531708466c6578706f7274 ([image: 😎] Location-Data = 0x323055531628373630204d61726b6574205374726565742c2053616e204672616e636973636f2c20434120555341 ([image: 😎] Service-Type = Framed-User ([image: 😎] Chargeable-User-Identity = 0x00 ([image: 😎] NAS-Port-Type = Wireless-802.11 ([image: 😎] Connect-Info = "CONNECT 802.11a/n" ([image: 😎] EAP-Message = 0x0208002e19001703030023fceea2d4691501a20ff900ac9ad31d7825db7d504078b003ff3b13dd143cfbfc596087 ([image: 😎] State = 0xf9bf494bfeb750728434925772015f5c ([image: 😎] Ruckus-SSID = "Test-SSID" ([image: 😎] Ruckus-BSSID = 0x34fa9f1ef39d ([image: 😎] Ruckus-Location = "Flexport" ([image: 😎] Ruckus-VLAN-ID = 120 ([image: 😎] Ruckus-SCG-CBlade-IP = 174391307 ([image: 😎] Attr-26.25053.155 = 0x41646d696e697374726174696f6e20446f6d61696e ([image: 😎] Ruckus-Zone-Name = "Default Zone" ([image: 😎] Ruckus-Wlan-Name = "Test-SSID" ([image: 😎] Message-Authenticator = 0x8c8011a8a3ff2640ac0c0dc915695f42 ([image: 😎] Event-Timestamp = "May 27 2021 20:23:58 UTC" ([image: 😎] Proxy-State = 0x3636 ([image: 😎] Restoring &session-state ([image: 😎] &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" ([image: 😎] # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default ([image: 😎] authorize { ([image: 😎] policy filter_username { ([image: 😎] if (&User-Name) { ([image: 😎] if (&User-Name) -> TRUE ([image: 😎] if (&User-Name) { ([image: 😎] if (&User-Name =~ / /) { ([image: 😎] if (&User-Name =~ / /) -> FALSE ([image: 😎] if (&User-Name =~ /@ [^@]*@/ ) { ([image: 😎] if (&User-Name =~ /@ [^@]*@/ ) -> FALSE ([image: 😎] if (&User-Name =~ /\.\./ ) { ([image: 😎] if (&User-Name =~ /\.\./ ) -> FALSE ([image: 😎] if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { ([image: 😎] if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE ([image: 😎] if (&User-Name =~ /\.$/) { ([image: 😎] if (&User-Name =~ /\.$/) -> FALSE ([image: 😎] if (&User-Name =~ /(a)\./) { ([image: 😎] if (&User-Name =~ /(a)\./) -> FALSE ([image: 😎] } # if (&User-Name) = notfound ([image: 😎] } # policy filter_username = notfound ([image: 😎] [preprocess] = ok ([image: 😎] [chap] = noop ([image: 😎] [mschap] = noop ([image: 😎] [digest] = noop ([image: 😎] suffix: Checking for suffix after "@" ([image: 😎] suffix: No '@' in User-Name = "jbravo", looking up realm NULL ([image: 😎] suffix: No such realm "NULL" ([image: 😎] [suffix] = noop ([image: 😎] eap: Peer sent EAP Response (code 2) ID 8 length 46 ([image: 😎] eap: Continuing tunnel setup ([image: 😎] [eap] = ok ([image: 😎] } # authorize = ok ([image: 😎] Found Auth-Type = eap ([image: 😎] # Executing group from file /etc/freeradius/3.0/sites-enabled/default ([image: 😎] authenticate { ([image: 😎] eap: Expiring EAP session with state 0xf9bf494bfeb75072 ([image: 😎] eap: Finished EAP session with state 0xf9bf494bfeb75072 ([image: 😎] eap: Previous EAP request found for state 0xf9bf494bfeb75072, released from the list ([image: 😎] eap: Peer sent packet with method EAP PEAP (25) ([image: 😎] eap: Calling submodule eap_peap to process data ([image: 😎] eap_peap: Continuing EAP-TLS ([image: 😎] eap_peap: [eaptls verify] = ok ([image: 😎] eap_peap: Done initial handshake ([image: 😎] eap_peap: [eaptls process] = ok ([image: 😎] eap_peap: Session established. Decoding tunneled attributes ([image: 😎] eap_peap: PEAP state send tlv failure ([image: 😎] eap_peap: Received EAP-TLV response ([image: 😎] eap_peap: ERROR: The users session was previously rejected: returning reject (again.) ([image: 😎] eap_peap: This means you need to read the PREVIOUS messages in the debug output ([image: 😎] eap_peap: to find out the reason why the user was rejected ([image: 😎] eap_peap: Look for "reject" or "fail". Those earlier messages will tell you ([image: 😎] eap_peap: what went wrong, and how to fix the problem ([image: 😎] eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed ([image: 😎] eap: Sending EAP Failure (code 4) ID 8 length 4 ([image: 😎] eap: Failed in EAP select ([image: 😎] [eap] = invalid ([image: 😎] } # authenticate = invalid ([image: 😎] Failed to authenticate the user ([image: 😎] Using Post-Auth-Type Reject ([image: 😎] # Executing group from file /etc/freeradius/3.0/sites-enabled/default ([image: 😎] Post-Auth-Type REJECT { ([image: 😎] attr_filter.access_reject: EXPAND %{User-Name} ([image: 😎] attr_filter.access_reject: --> jbravo ([image: 😎] attr_filter.access_reject: Matched entry DEFAULT at line 11 ([image: 😎] [attr_filter.access_reject] = updated ([image: 😎] [eap] = noop ([image: 😎] policy remove_reply_message_if_eap { ([image: 😎] if (&reply:EAP-Message && &reply:Reply-Message) { ([image: 😎] if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE ([image: 😎] else { ([image: 😎] [noop] = noop ([image: 😎] } # else = noop ([image: 😎] } # policy remove_reply_message_if_eap = noop ([image: 😎] } # Post-Auth-Type REJECT = updated ([image: 😎] Delaying response for 1.000000 seconds

1 0

Check local before LDAP Authentication
by Matteo Raffa 28 May '21

28 May '21

I’ve found some old posts about this on the mailing list, but all of those were 10+ years old and using v1 or v2. Further to that, I am using LDAP for authentication (Google doesn’t send passwords). So, in my authorize {} I have set this before pap to set the proper auth method: if (User-Password) { update control { Auth-Type := ldap } } Now I believe that I should just need to add another condition to check for files module returning notfound code, so that it only sets ldap in case the user is not found in files, otherwise it will just go on to pap. Something like if (User-Password && files == notfound) {...} But I can’t find the correct way to do this check. What is the attribute name corresponding to “files module return code” that I should check? I checked man unlang for that, but it only says that I can check for a module return code just after its execution. It doesn’t tell anything about a variable storing each module’s return code. Thanks!

5 7

ARTICLE: FreeRADIUS is your new DHCP server (if you want)
by marketing＠networkradius.com 28 May '21

28 May '21

** FreeRADIUS: a high performance and flexible DHCP server --------------------------------------------- We are happy to announce that FreeRADIUS 3 is now fully compliant with the base DHCP standards. Previous versions supported the base DORA exchange, but lacked some features such as Decline packets. With greater flexibility and performance that is as fast or faster than the ISC DHCP server, FreeRADIUS is now a compelling option if you find yourself limited by your current implementation. For the last twenty years, FreeRADIUS has been known as the world’s leading open source RADIUS server. At Network RADIUS, we have a long history of leading the maintenance and development of FreeRADIUS. During that time, FreeRADIUS has been focused on the RADIUS standards, with other protocols being a secondary consideration. One of the other protocols it has supported for over a decade is DHCP. We decided that it was time to take a closer look at the DHCP implementation. Our goal was to evaluate its stability and performance, to meet or exceed industry standards, to make adjustments where necessary, and to beef up support for edge cases in the protocol. The results of our work are included in FreeRADIUS 3.0.22 which is available now. Read the full article… https://networkradius.com/articles/2021/05/20/does-freeRADIUS-support-DHCP.… ** Sign up to get this content directly --------------------------------------------- Want to get these articles in all their HTML glory? Sign up here: http://eepurl.com/hwuWrn ** Need RADIUS help? --------------------------------------------- Get commercial support from the team behind FreeRADIUS. https://networkradius.com/contact/ ** What is the relationship between Network RADIUS and FreeRADIUS? ---------------------------------------------- FreeRADIUS is an open source implementation of the RADIUS protocol and was written by Alan DeKok in 1999. Network RADIUS is a private, for-profit company founded by Alan DeKok which provides commercial support for FreeRADIUS. The Network RADIUS team has been the primary contributor to FreeRADIUS for the last 20 years. The FreeRADIUS mailing list, wiki, and documentation are all moderated and maintained by the Network RADIUS team. FreeRADIUS has always been, and will always continue to be, open source. The Network RADIUS team provides commercial support to paying clients, and free product development for the FreeRADIUS community at large. All of our software development for FreeRADIUS is integrated into the Open Source platform, and will always continue to be.

1 0

eduroam howto log failure mschapv2
by Francesco Malvezzi 28 May '21

28 May '21

I have been using a freeradius following the guides at: https://wiki.freeradius.org/guide/eduroam and https://wiki.freeradius.org/guide/eduroam-logging since quite some time, without a glitch. Sometimes we are missing the logs of failed attempts in particular in the wrong password case. We suppose that some clients prompt users to re-insert password a few times after password failure: if the user gives up and interrupts the flow, nothing is logged on the server side. We can quite simulate this issue if we modify the test script at: https://wiki.freeradius.org/guide/eduroam#testing_test-files_eapol_test-pea… and replace the line: phase2="auth=MSCHAPV2 mschapv2_retry=0" with: phase2="auth=MSCHAPV2" If you try the modified test script with a wrong password the failure is not logged. Can you help me to make the help desk happy by collecting also those logs? Can you suggest me a strategy? Do I need to log the connect packet (does it include the username?)? Is it possible to get failure log from mschap? Can you share details? Thank you, Francesco

3 2

Pass attributes from inner-tunnel to outer Access-Accept reply
by Matteo Raffa 28 May '21

28 May '21

Hello, I have set up EAP-TTLS with authentication against Google Secure LDAP. I am now trying to pass LDAP attributes together with other attributes in Access-Accept reply back to the NAS. Specifically, I have set Tunnel-Private-Group-ID on LDAP for each user, so I need to pass this together with Tunnel-Type := 13 and Tunnel-Medium-Type := 6. I am able to get Tunnel-Private-Group-ID from LDAP and to assign it to inner-tunnel reply in ldap: update { control:Password-With-Header += 'userPassword' # control:NT-Password := 'ntPassword' # reply:Reply-Message := 'radiusReplyMessage' # reply:Tunnel-Type := 'radiusTunnelType' # reply:Tunnel-Medium-Type := 'radiusTunnelMediumType' # reply:Tunnel-Private-Group-ID := 'radiusTunnelPrivategroupId' reply:Tunnel-Private-Group-ID := 'vlan-id-colverde' # Where only a list is specified as the RADIUS attribute, # the value of the LDAP attribute is parsed as a valuepair # in the same format as the 'valuepair_attribute' (above). control: += 'radiusControlAttribute' request: += 'radiusRequestAttribute' reply: += 'radiusReplyAttribute' } So, when testing inner tunnel with this setting (radtest username userpass 127.0.0.1:18120 0 testing123), authentication works (see first debug log attached) At this point I went in inner-tunnel in post-auth and tried to have the above mentioned attributes passed to outer reply # # Instead of "use_tunneled_reply", change this "if (0)" to an # "if (1)". # if (1) { # # These attributes are for the inner-tunnel only, # and MUST NOT be copied to the outer reply. # update reply { User-Name !* ANY Message-Authenticator !* ANY EAP-Message !* ANY Proxy-State !* ANY MS-MPPE-Encryption-Types !* ANY MS-MPPE-Encryption-Policy !* ANY MS-MPPE-Send-Key !* ANY MS-MPPE-Recv-Key !* ANY Tunnel-Type := 13 Tunnel-Medium-Type := 6 Tunnel-Private-Group-ID := &reply:Tunnel-Private-Group-ID } # # Copy the inner reply attributes to the outer # session-state list. The post-auth policy will take # care of copying the outer session-state list to the # outer reply. # update { &outer.session-state: += &reply: } } And that’s where I start to get errors (see the second debug log). The update outer session-state block returns this error: ERROR: Mapping "&reply:" -> "&outer.session-state:" invalid in this context I tried to sort that out and did various tests for the past day, but I really couldn’t understand what that is due to. I get the same error even if I remove the attribute assignment from ldap module and keep the default in update reply block in inner tunnel (so without the Tunnel-* stuff I added), so I can’t really understand where it comes from. It seems that the problem only arise when the reply gets copied to the outer session-state, in fact, if I comment that update block out, the inner-tunnel reply is correctly built and sent with Access-Accept (See third debug log). Can you point me in the right direction? Many thanks —FIRST DEBUG LOG FOR INNER-TUNNEL WITHOUT ATTRIBUTES— FreeRADIUS Version 3.0.22 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/ldap including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm DOMAIN.EXT { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debug state unknown (cap_sys_ptrace capability not set) systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = “IDENTITY" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = “dc=DOMAIN,dc=EXT" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/ldap-client.crt" private_key_file = "/etc/freeradius/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:353 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 127.0.0.1 client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 172.17.0.0 client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client ::1 } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 37289 Listening on proxy address :: port 41236 Ready to process requests (0) Received Access-Request Id 4 from 127.0.0.1:41917 to 127.0.0.1:18120 length 82 (0) User-Name = “username" (0) User-Password = “userpass" (0) NAS-IP-Address = 172.17.0.2 (0) NAS-Port = 0 (0) Message-Authenticator = 0x9031f009a212bcfceb3d342e3bbe592d (0) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = “username", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=username) (0) ldap: Performing search in “dc=DOMAIN,dc=EXT" with filter "(uid=username)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Processing user attributes (0) ldap: reply:Tunnel-Private-Group-ID := '10' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) [expiration] = noop (0) [logintime] = noop (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := LDAP (0) } # update control = noop (0) } # if (User-Password) = noop (0) [pap] = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "username" (0) ldap: Using user DN from request "uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" was successful rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (0) post-auth { (0) if (0) { (0) if (0) -> FALSE (0) } # post-auth = noop (0) Sent Access-Accept Id 4 from 127.0.0.1:18120 to 127.0.0.1:41917 length 0 (0) Tunnel-Private-Group-Id := "10" (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 4 with timestamp +0 Ready to process requests —SECOND DEBUG LOG FOR INNER-TUNNEL WITH ATTRIBUTES TO BE SENT IN OUTER REPLY— FreeRADIUS Version 3.0.22 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/ldap including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm DOMAIN.EXT { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debug state unknown (cap_sys_ptrace capability not set) systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = “IDENTITY" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = “dc=DOMAIN,dc=EXT" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/ldap-client.crt" private_key_file = "/etc/freeradius/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 127.0.0.1 client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 172.17.0.0 client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client ::1 } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 35770 Listening on proxy address :: port 38092 Ready to process requests (0) Received Access-Request Id 177 from 127.0.0.1:50596 to 127.0.0.1:18120 length 82 (0) User-Name = "username" (0) User-Password = “userpass" (0) NAS-IP-Address = 172.17.0.2 (0) NAS-Port = 0 (0) Message-Authenticator = 0x400747564d18d6c97c64443a0305daad (0) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "username", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=username) (0) ldap: Performing search in “dc=DOMAIN,dc=EXT" with filter "(uid=username)", scope "sub" (0) ldap: Waiting for search result... rlm_ldap (ldap): Reconnecting (0) rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) ldap: WARNING: Search failed: Timed out while waiting for server to respond. Got new socket, retrying... (0) ldap: Waiting for search result... (0) ldap: User object found at DN “uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Processing user attributes (0) ldap: reply:Tunnel-Private-Group-ID := '10' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) [expiration] = noop (0) [logintime] = noop (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := LDAP (0) } # update control = noop (0) } # if (User-Password) = noop (0) [pap] = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "username" (0) ldap: Using user DN from request “uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user “uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (0) post-auth { (0) if (1) { (0) if (1) -> TRUE (0) if (1) { (0) update reply { (0) User-Name !* ANY (0) Message-Authenticator !* ANY (0) EAP-Message !* ANY (0) Proxy-State !* ANY (0) MS-MPPE-Encryption-Types !* ANY (0) MS-MPPE-Encryption-Policy !* ANY (0) MS-MPPE-Send-Key !* ANY (0) MS-MPPE-Recv-Key !* ANY (0) Tunnel-Type := VLAN (0) Tunnel-Medium-Type := IEEE-802 (0) Tunnel-Private-Group-ID := &reply:Tunnel-Private-Group-ID -> '10' (0) } # update reply = noop (0) update { (0) ERROR: Mapping "&reply:" -> "&outer.session-state:" invalid in this context (0) } # update = invalid (0) } # if (1) = invalid (0) } # post-auth = invalid (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> username (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) update outer.session-state { (0) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (0) } # update outer.session-state = invalid (0) } # Post-Auth-Type REJECT = invalid (0) Delaying response for 1.000000 seconds (0) (0) Discarding duplicate request from client localhost port 50596 - ID: 177 due to delayed response Waking up in 0.9 seconds. (0) (0) Discarding duplicate request from client localhost port 50596 - ID: 177 due to delayed response Waking up in 0.9 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 177 from 127.0.0.1:18120 to 127.0.0.1:50596 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 177 with timestamp +18 Ready to process requests —THIRD DEBUG LOG FOR INNER-TUNNEL WITH ATTRIBUTES ONLY IN INNER REPLY— FreeRADIUS Version 3.0.22 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/ldap including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm DOMAIN.EXT { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debug state unknown (cap_sys_ptrace capability not set) systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = "IDENTITY" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=DOMAIN,dc=EXT" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/ldap-client.crt" private_key_file = "/etc/freeradius/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 127.0.0.1 client user_defined_clients { ipaddr = 172.17.0.0/16 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 172.17.0.0 client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client ::1 } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 37923 Listening on proxy address :: port 49414 Ready to process requests (0) Received Access-Request Id 209 from 127.0.0.1:59797 to 127.0.0.1:18120 length 82 (0) User-Name = "username" (0) User-Password = “userpass" (0) NAS-IP-Address = 172.17.0.2 (0) NAS-Port = 0 (0) Message-Authenticator = 0xf92f8d50a2ccb53c57eebd5a6ce0d4f6 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "username", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=username) (0) ldap: Performing search in "dc=DOMAIN,dc=EXT" with filter "(uid=username)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Processing user attributes (0) ldap: reply:Tunnel-Private-Group-ID := '10' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) [expiration] = noop (0) [logintime] = noop (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := LDAP (0) } # update control = noop (0) } # if (User-Password) = noop (0) [pap] = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "username" (0) ldap: Using user DN from request "uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user “uid=username,ou=OU,ou=OU,ou=OU,dc=DOMAIN,dc=EXT" was successful rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (0) post-auth { (0) if (1) { (0) if (1) -> TRUE (0) if (1) { (0) update reply { (0) User-Name !* ANY (0) Message-Authenticator !* ANY (0) EAP-Message !* ANY (0) Proxy-State !* ANY (0) MS-MPPE-Encryption-Types !* ANY (0) MS-MPPE-Encryption-Policy !* ANY (0) MS-MPPE-Send-Key !* ANY (0) MS-MPPE-Recv-Key !* ANY (0) Tunnel-Type := VLAN (0) Tunnel-Medium-Type := IEEE-802 (0) Tunnel-Private-Group-ID := &reply:Tunnel-Private-Group-ID -> '10' (0) } # update reply = noop (0) } # if (1) = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 209 from 127.0.0.1:18120 to 127.0.0.1:59797 length 0 (0) Tunnel-Private-Group-Id := "10" (0) Tunnel-Type := VLAN (0) Tunnel-Medium-Type := IEEE-802 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 209 with timestamp +10 Ready to process requests

3 3

sha128 or sha256 support?
by Honglak Kim 27 May '21

27 May '21

Hello, Does FreeRadius support sha128 or sha256 for the user encrypted password?We are using the internet to communicate between the radius server and network devices.Therefore more strong encrypted password method seems necessary. Thanks a lot,Paul

3 5

Handling unreliable proxy partners
by paul.moser＠bt.com 27 May '21

27 May '21

We proxy a lot of authentication to radius servers that we do not manage/control. In a number of failure scenarios in order to maintain a good customer experience it is better for us to give access to the network even though we can't authenticate the users so customers continue to receive service even if that means giving some non-customer access. We might restrict the length of these sessions or turn on QoS restrictions. Using fallback virtual servers and (in non fallback virtual servers) Post-Proxy-Type Fail-Authentication allows us to handle the cases where no radius servers are responding for a partner or proxying of a single request fails, by returning an access-accept ourselves and automatically kicks in when one of those situations presents itself. Any common radius attributes that need to be set to put restrictions on those sessions can be put in a policy and called from each section rather than duplicating code. This works well. We'd also like a manual mechanism that our support team can trigger to cover other failure scenarios, eg the remote radius server is incorrectly returning access-reject for all valid users, and those scenarios that we haven't been able to think of but will occur, inevitably at the most inconvenient of times. My first attempt at this was that the support team could use radmin to set the home servers to dead which would mean packets were routed via the falback virtual server. I initially thought this worked as a solution, but if FreeRadius is doing status checks against the remote servers then it will automatically bring them back into service as long as the status check requests are responding, which if say the remote partner is responding with access-rejects to even valid users is not what you want. I also considered using ip tables to drop the packets, which would trigger the use of the fallback virtual server, but if you'd decided to go into this state of accepting everything because of some intermittent network problem then dropping all packets with ip tables would make debugging that problem using radclient/radtest very difficult. One idea I haven't explored is having two copies of each virtual server, in different files, one for the normal situation and one for the failure situation and switching which one to use using symlinks and radmin to reload the configuration. So far what I have come up with so far is within a virtual server pre-proxy section to use the exec module to call a simple shell script that check for the presence of flag files indicating which if any partners are in a bad state. The support team are responsible for creating these files. If any flag files are present the the script adds a radius attribute for each, the value indicating which partner. In the pre-proxy section I can then check for this attribute and value if it indicates that the partner the virtual server is handling is in a failure state then call accept from the always module which will cancel the proxying attempt and send an access-accept. We can also call any policy that would also get called in the fallback virtual server or Post-Proxy-Type Fail-Authentication if we want common radius attributes to be returned in the response to apply some sort of QoS restriction. The rlm_exec documentation states using exec is very slow and something like the perl module would be more appropriate for a live environment. Before I carry on down the path of performance testing this and trying perl/python/rest/custom C module does anyone have any thoughts/observations or alternative suggestions? Thanks, Paul

4 10

How to define the Postgres schema name in mods-available sql ?
by Alen 27 May '21

27 May '21

In our postgres db we have a master_db and two underlying schemas, main and radius. How do I define the schema in /etc/freeradius/3.0/mods-available/sql ? server = "xxx" port = 5432 login = "" password = "" radius_db = "master_db" It seems I can only specify the database but not the underlying schema. Thanks,

2 3

postgresql queries.conf has an unterminated string
by Alen 27 May '21

27 May '21

Freeradius 3.0.21 seems to have a typo in /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf Line 505. AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (${....event_timestamp_epoch} - EXTRACT(EPOCH FROM(AcctStartTime)))), \ The error output: sudo freeradius -X FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf[505]: Parse error: Unterminated string Errors reading or parsing /etc/freeradius/3.0/radiusd.conf

3 4