February 2022 - Freeradius-Users - lists.freeradius.org

Question regarding SQN in EAP-AKA in v4.0.0
by Shane Guan 08 Feb '22

08 Feb '22

Hello, We are currently using freeradius v4.0.0 on the nested_coding branch to test our peer with the eap-aka method. We noticed a discrepancy in our understanding of the behavior of the AuC and what freeradius does. In TS 133 102 - V8.1.0 - Universal Mobile Telecommunications System (UMTS); LTE; 3G security; Security architecture (3GPP TS 33.102 version 8.1.0 Release 8) (etsi.org)<https://www.etsi.org/deliver/etsi_ts/133100_133199/133102/08.01.00_60/ts_13…> sections C.1.1.2, C.1.2, and C.3 imply that the sequence number generated by the AuC should have the least significant bits reserved for an index value IND, while the others are for the SEQ. While it doesn't specify how many bits are reserved for the IND, section C.3 suggests that 5 is a common number. However, freeradius doesn't seem to use any bits for the index, as the default SQN it uses if none is provided is 0x2. Is this desired behavior for freeradius? Thanks! Shane

3 2

2FA token two fields
by Adam Barnett 07 Feb '22

07 Feb '22

Hi All, I am suoper new to freeradius so sorry if this is a stupid question I have configured it for use for an application that is using username, password and a OTP The application asks the user for their username and password, and then once they have been entered asks for the OTP When running freeradus in debug mode i can see that the username is correct but the password field has been overwritten with the 2FA token , i am unsure what i need to change so this does not get overwriten and its seen as two fields... Here is the error (0) Received Access-Request Id 2 from 10.5.4.10:60850 to 10.5.4.9:1812 length 66 (0) User-Name = "testuser" (0) User-Password = "24577371" (0) Message-Authenticator = 0x03a7e13a57e67f6fba5b3d59cf917555 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: Failed resolving GID: No error (0) files: users: Matched entry DEFAULT at line 66 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = pam (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) pam: Using pamauth string "radiusd" for pam.conf lookup (0) pam: ERROR: pam_authenticate failed: Authentication failure (0) [pam] = reject (0) } # authenticate = reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> testuser (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.9 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 2 from 10.5.4.9:1812 to 10.5.4.10:60850 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 2 with timestamp +216 Ready to process requests Thanks a lot for all the help -- Adam

2 1

Difference between centos7 and centos7Server packages
by Burn Zero 04 Feb '22

04 Feb '22

Hi, Is there any difference between the packages listed in http://packages.networkradius.com/freeradius-3.0/centos/7/ and http://packages.networkradius.com/freeradius-3.0/centos/7Server/ centos7 and centos7Server. I see both have identical packages. Thank you.

2 1

HUP Signal
by Bassem Mettichi 02 Feb '22

02 Feb '22

Hello, Iam using Freeradius 3.0.25 and i get this info message on radius.log Info: Received HUP signal Info: HUP - No files changed. Ignoring Does this mean that my Freeradius server has stopped or restarted? Thanks Bassem

1 0

Post-auth (ldap) update if statement works w/ radtest, doesn't work with actual authentication
by Toupin, Nick 01 Feb '22

01 Feb '22

Hi, Fairly new to Freeradius - been using Microsoft/NPS for years and now trying to migrate to Freeradius. I'm like 99% of the way to having what we want configured, just stuck on this last part. Seeing as it works with radtest but doesn't work with an actual authentication, I'm assuming there's something missing/different in my config that's specific to the authentication type (PAP -> ldap) that radtest doesn't hit so the radtest works.. more below including the debug. *Some background info:* - Using Google LDAP to authenticate the radius using Google accounts - Built the setup using this guide/info: https://www.nasirhafeez.com/freeradius-with-google-g-suite-workspace-secure… - Added in a if statemenet under the /sites-enabled/default -> ldap -> update to check the user's DN in Google to grab their OU, if they match an OU within the statement they are given an update reply of ' Tunnel-Private-Group-Id = "160" ' with an else of ' Tunnel-Private-Group-Id = "180" ' so X OU members get VLAN 160 and everyone else gets VLAN 180. - This is all fully working with radtest: radtest teststaff '******' xx.xxx.xx.xxx 0 '**************' Sent Access-Request Id 87 from 0.0.0.0:37520 to xx.xxx.xx.xxx:1812 length 79 User-Name = "teststaff" User-Password = "******" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "******" Received Access-Accept Id 87 from 50.116.62.250:1812 to 10.5.0.56:37520 length 74 Tunnel-Private-Group-Id:0 = "160" Reply-Message = "Matched to Staff for V160" - When trying with an actual Radius authentication the authentication goes through however the if statement fails so the user gets Tunnel-Private-Group-Id 180 no matter what -- freeradius debug notes 'ERROR: Failed retrieving values required to evaluate condition' *Below is the debug log with two requests, the first request is when doing a radtest, the second is when doing an actual authentication.* FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/soh including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/filter including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm DOMAIN.org { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client mist { ipaddr = 10.5.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client mist2 { ipaddr = xxx.xx.xxx.xxx/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = "Inexperien" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=DOMAIN,dc=org" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/3.0/certs/ldap-client.crt" private_key_file = "/etc/freeradius/3.0/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 36589 Listening on proxy address :: port 60490 Ready to process requests (0) Received Access-Request Id 87 from xxx.xx.xxx.xxx:13712 to xx.xxx.xx.xxx:1812 length 79 (0) User-Name = "teststaff" (0) User-Password = "******" (0) NAS-IP-Address = 127.0.1.1 (0) NAS-Port = 0 (0) Message-Authenticator = 0xe5e2619bb370086f773ea2c7b45d5edd (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=teststaff) (0) ldap: Performing search in "dc=DOMAIN,dc=org" with filter "(uid=teststaff)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" (0) ldap: Processing user attributes (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := ldap (0) } # update control = noop (0) } # if (User-Password) = noop (0) } # authorize = ok (0) Found Auth-Type = ldap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "teststaff" (0) ldap: Using user DN from request "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" was successful rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) } # authenticate = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) if (&control:LDAP-UserDN =~ /,ou=District Staff/) || (&control:LDAP-UserDN =~ /,ou=High School Staff/) || (&control:LDAP-UserDN =~ /,ou=Elementary Staff/) { (0) if (&control:LDAP-UserDN =~ /,ou=District Staff/) || (&control:LDAP-UserDN =~ /,ou=High School Staff/) || (&control:LDAP-UserDN =~ /,ou=Elementary Staff/) -> TRUE (0) if (&control:LDAP-UserDN =~ /,ou=District Staff/) || (&control:LDAP-UserDN =~ /,ou=High School Staff/) || (&control:LDAP-UserDN =~ /,ou=Elementary Staff/) { (0) update reply { (0) Tunnel-Private-Group-Id = "160" (0) Reply-Message += "Matched to Staff for V160" (0) } # update reply = noop (0) } # if (&control:LDAP-UserDN =~ /,ou=District Staff/) || (&control:LDAP-UserDN =~ /,ou=High School Staff/) || (&control:LDAP-UserDN =~ /,ou=Elementary Staff/) = noop (0) ... skipping else: Preceding "if" was taken (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 87 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:13712 length 0 (0) Tunnel-Private-Group-Id = "160" (0) Reply-Message += "Matched to Staff for V160" (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 87 with timestamp +5 Ready to process requests (1) Received Access-Request Id 143 from xxx.xx.xxx.xxx:56820 to xx.xxx.xx.xxx:1812 length 214 (1) User-Name = "teststaff" (1) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "**-**-**-**-**-**" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "7BAF649AFEC3B895" (1) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1200 (1) EAP-Message = 0x0281000e01746573747374616666 (1) NAS-IP-Address = 10.5.2.15 (1) Message-Authenticator = 0xde8785c18439ff9bdd600e24beae0f1e (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 129 length 14 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Initiating new TLS session (1) eap_ttls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 130 length 6 (1) eap: EAP session adding &reply:State = 0xa2cec59ca24cd0ba (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 143 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:56820 length 0 (1) EAP-Message = 0x018200061520 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa2cec59ca24cd0baa513150d3bcdb7a0 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 144 from xxx.xx.xxx.xxx:56820 to xx.xxx.xx.xxx:1812 length 414 (2) User-Name = "teststaff" (2) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "**-**-**-**-**-**" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "7BAF649AFEC3B895" (2) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1200 (2) EAP-Message = 0x028200c4150016030100b9010000b5030396d5174fcc89754350934dda9735ba838b7379f4e3f2581424f73be33913bcf2000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (2) State = 0xa2cec59ca24cd0baa513150d3bcdb7a0 (2) NAS-IP-Address = 10.5.2.15 (2) Message-Authenticator = 0xda3090b6942a5a265b3e85efd06852a2 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 130 length 196 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa2cec59ca24cd0ba (2) eap: Finished EAP session with state 0xa2cec59ca24cd0ba (2) eap: Previous EAP request found for state 0xa2cec59ca24cd0ba, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Got final TLS record fragment (190 bytes) (2) eap_ttls: WARNING: Total received TLS record fragments (190 bytes), does not equal indicated TLS record length (0 bytes) (2) eap_ttls: [eaptls verify] = ok (2) eap_ttls: Done initial handshake (2) eap_ttls: (other): before SSL initialization (2) eap_ttls: TLS_accept: before SSL initialization (2) eap_ttls: TLS_accept: before SSL initialization (2) eap_ttls: <<< recv TLS 1.3 [length 00b9] (2) eap_ttls: TLS_accept: SSLv3/TLS read client hello (2) eap_ttls: >>> send TLS 1.2 [length 003d] (2) eap_ttls: TLS_accept: SSLv3/TLS write server hello (2) eap_ttls: >>> send TLS 1.2 [length 02e7] (2) eap_ttls: TLS_accept: SSLv3/TLS write certificate (2) eap_ttls: >>> send TLS 1.2 [length 014d] (2) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (2) eap_ttls: >>> send TLS 1.2 [length 0004] (2) eap_ttls: TLS_accept: SSLv3/TLS write server done (2) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_ttls: TLS - In Handshake Phase (2) eap_ttls: TLS - got 1161 bytes of data (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 131 length 1004 (2) eap: EAP session adding &reply:State = 0xa2cec59ca34dd0ba (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 144 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:56820 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa2cec59ca34dd0baa513150d3bcdb7a0 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 145 from xxx.xx.xxx.xxx:56820 to xx.xxx.xx.xxx:1812 length 224 (3) User-Name = "teststaff" (3) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "**-**-**-**-**-**" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "7BAF649AFEC3B895" (3) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1200 (3) EAP-Message = 0x028300061500 (3) State = 0xa2cec59ca34dd0baa513150d3bcdb7a0 (3) NAS-IP-Address = 10.5.2.15 (3) Message-Authenticator = 0x23c8cb070fc40241a6a1e05c55d7fbfb (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 131 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xa2cec59ca34dd0ba (3) eap: Finished EAP session with state 0xa2cec59ca34dd0ba (3) eap: Previous EAP request found for state 0xa2cec59ca34dd0ba, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 132 length 177 (3) eap: EAP session adding &reply:State = 0xa2cec59ca04ad0ba (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 145 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:56820 length 0 (3) EAP-Message = 0x018400b11580000004891f8bbc2c9dc19895d7faebe903fb3cfef01855ef61952b73795b9663c608514aeb27a650442f855c972c4888fc57a44c9986d47ff035e8cb82cb76c0749f7b8228350b23ed7877615bc202774b67d3403e293153760d6f4f9e4db4e6781ed4c929a2eebb5476048e0f97aea8866801e65b3ab1efca2ce5d325181c46a5af3fbbcd2a807960dc29ebeef5cbb94810f37325694c968184eeeff24be21f28d916030300040e000000 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xa2cec59ca04ad0baa513150d3bcdb7a0 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 146 from xxx.xx.xxx.xxx:56820 to xx.xxx.xx.xxx:1812 length 350 (4) User-Name = "teststaff" (4) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "**-**-**-**-**-**" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "7BAF649AFEC3B895" (4) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1200 (4) EAP-Message = 0x02840084150016030300461000004241040b8b9a0554ba26166d0c8f8490c6b50c9c17c16d70c9f3cc0303489f2e52fa42be3109cab09024344987329de760580adf9cf0503a2ce8a5ccdae8fe611a1fce14030300010116030300287b67bd5957d3579d95ab3862240ffe75ddd818058143f514c573ddb7d3ad2ffbcbbf7b408810fe6a (4) State = 0xa2cec59ca04ad0baa513150d3bcdb7a0 (4) NAS-IP-Address = 10.5.2.15 (4) Message-Authenticator = 0x660d368e50d4e4f2cf55721a8aa58572 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 132 length 132 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xa2cec59ca04ad0ba (4) eap: Finished EAP session with state 0xa2cec59ca04ad0ba (4) eap: Previous EAP request found for state 0xa2cec59ca04ad0ba, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: [eaptls verify] = ok (4) eap_ttls: Done initial handshake (4) eap_ttls: TLS_accept: SSLv3/TLS write server done (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (4) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS read finished (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS write finished (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: TLS - Connection Established (4) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_ttls: TLS-Session-Version = "TLS 1.2" (4) eap_ttls: TLS - got 51 bytes of data (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 133 length 61 (4) eap: EAP session adding &reply:State = 0xa2cec59ca14bd0ba (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 146 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:56820 length 0 (4) EAP-Message = 0x0185003d1580000000331403030001011603030028c4cc384ad38aff78ab0137e1d398483cdc2c8e00ca2e900f51edc241095f10468ff74fd4dfc8cc25 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xa2cec59ca14bd0baa513150d3bcdb7a0 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 147 from xxx.xx.xxx.xxx:56820 to xx.xxx.xx.xxx:1812 length 297 (5) User-Name = "teststaff" (5) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "**-**-**-**-**-**" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "7BAF649AFEC3B895" (5) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1200 (5) EAP-Message = 0x0285004f150017030300447b67bd5957d3579e4a6ae9ab03e6525da9c897419634b4ae93549f99fdae11665d8e30100c514edbb2fbaf150bb12b27ee3a01355159a5f41a44e1b5c53133b1da251cea (5) State = 0xa2cec59ca14bd0baa513150d3bcdb7a0 (5) NAS-IP-Address = 10.5.2.15 (5) Message-Authenticator = 0xbe47116d7c5387923e6e8655f6385868 (5) Restoring &session-state (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 133 length 79 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xa2cec59ca14bd0ba (5) eap: Finished EAP session with state 0xa2cec59ca14bd0ba (5) eap: Previous EAP request found for state 0xa2cec59ca14bd0ba, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: [eaptls verify] = ok (5) eap_ttls: Done initial handshake (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: User-Name = "teststaff" (5) eap_ttls: User-Password = "******" (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) User-Name = "teststaff" (5) User-Password = "******" (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) Called-Station-Id = "xx-xx-xx-xx-xx-xx:HPS-GTest" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "**-**-**-**-**-**" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "7BAF649AFEC3B895" (5) Acct-Multi-Session-Id = "6C93D73ED82AE35F" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1200 (5) NAS-IP-Address = 10.5.2.15 (5) Event-Timestamp = "Feb 1 2022 17:50:04 UTC" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "teststaff", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: No EAP-Message, not doing EAP (5) [eap] = noop (5) [files] = noop rlm_ldap (ldap): Reserved connection (2) (5) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (5) ldap: --> (uid=teststaff) (5) ldap: Performing search in "dc=DOMAIN,dc=org" with filter "(uid=teststaff)", scope "sub" (5) ldap: Waiting for search result... (5) ldap: User object found at DN "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" (5) ldap: Processing user attributes (5) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (5) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (2) Need 3 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (7), 1 of 25 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful (5) [ldap] = ok (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) if (User-Password) { (5) if (User-Password) -> TRUE (5) if (User-Password) { (5) update control { (5) Auth-Type := ldap (5) } # update control = noop (5) } # if (User-Password) = noop (5) } # authorize = ok (5) Found Auth-Type = ldap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authenticate { rlm_ldap (ldap): Reserved connection (3) (5) ldap: Login attempt by "teststaff" (5) ldap: Using user DN from request "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" (5) ldap: Waiting for bind result... (5) ldap: Bind successful (5) ldap: Bind as user "uid=teststaff,ou=Testing,ou=Elementary Staff,ou=Elementary School,ou=Users,dc=DOMAIN,dc=org" was successful rlm_ldap (ldap): Released connection (3) Need 2 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (8), 1 of 24 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed. rlm_ldap (ldap): Bind successful (5) [ldap] = ok (5) } # authenticate = ok (5) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) post-auth { (5) if (1) { (5) if (1) -> TRUE (5) if (1) { (5) update reply { (5) User-Name !* ANY (5) Message-Authenticator !* ANY (5) EAP-Message !* ANY (5) Proxy-State !* ANY (5) MS-MPPE-Encryption-Types !* ANY (5) MS-MPPE-Encryption-Policy !* ANY (5) MS-MPPE-Send-Key !* ANY (5) MS-MPPE-Recv-Key !* ANY (5) } # update reply = noop (5) update { (5) No attributes updated for RHS &reply: (5) No attributes updated for RHS Tunnel-Private-Group-Id[*] (5) } # update = noop (5) } # if (1) = noop (5) } # post-auth = noop (5) } # server inner-tunnel (5) Virtual server sending reply (5) eap_ttls: Got tunneled Access-Accept (5) eap: Sending EAP Success (code 3) ID 133 length 4 (5) eap: Freeing handler (5) [eap] = ok (5) } # authenticate = ok (5) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (5) post-auth { (5) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (5) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (5) update { (5) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (5) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (5) } # update = noop (5) if (&control:LDAP-UserDN =~ /,ou=District Staff/) || (&control:LDAP-UserDN =~ /,ou=High School Staff/) || (&control:LDAP-UserDN =~ /,ou=Elementary Staff/) { (5) ERROR: Failed retrieving values required to evaluate condition (5) else { (5) update reply { (5) Tunnel-Private-Group-Id = "180" (5) } # update reply = noop (5) } # else = noop (5) [exec] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # post-auth = noop (5) Sent Access-Accept Id 147 from xx.xxx.xx.xxx:1812 to xxx.xx.xxx.xxx:56820 length 0 (5) MS-MPPE-Recv-Key = 0xa107a762471fee4871d11ab936184c5cb8a0af457be8f91698ada4e266007a0d (5) MS-MPPE-Send-Key = 0xbfc140a4da9bf14e67cebb2db4d1bd9115b9b2f6831acec281f610a0636c8f33 (5) EAP-Message = 0x03850004 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) User-Name = "teststaff" (5) Tunnel-Private-Group-Id = "180" (5) Finished request Waking up in 1.6 seconds. (1) Cleaning up request packet ID 143 with timestamp +23 (2) Cleaning up request packet ID 144 with timestamp +23 (3) Cleaning up request packet ID 145 with timestamp +23 (4) Cleaning up request packet ID 146 with timestamp +23 Waking up in 3.1 seconds. (5) Cleaning up request packet ID 147 with timestamp +23 Ready to process requests -- Nicholas Toupin Technology Director Hopedale Public Schools Phone: 508-488-5510 -- Please be considerate: Only print this email if absolutely necessary. Saving resources allows more direct services to students. When writing or responding please remember that the Secretary of State's Office has determined that email is a public record. This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this email in error, and delete the copy you received. The Hopedale Public Schools do not discriminate on the basis of race, color, religion, national origin, sex, gender identity, sexual orientation, age, genetic information, ancestry, military status, disability, pregnancy or pregnancy related condition. The following person has been designated to handle inquiries regarding the nondiscrimination policies: Superintendent of Schools, 25 Adin St., Hopedale, MA 01747 All electronic messages are archived in conformance with Massachusetts and federal public records laws.

2 1

update config files
by Can Paçacı 01 Feb '22

01 Feb '22

Hi, When the configuration files (like client.conf, site configuration file,..) updates it requires restart the radiusd service, the reload option doesn't work. Is there any solution for that? Regards Can

3 2