June 2022 - Freeradius-Users - lists.freeradius.org

User name case insensitivity - revisited
by Luveh Keraph 13 Jun '22

13 Jun '22

I thought I had grasped what is involved in making FreeRADIUS 3.0.* to process user names in a case-insensitive way, but I am not so sure now. Here is what I have done: First, I added the following line in my /etc/raddb/mods-enabled/files: key = "%{%{Stripped-User-Name}:-%{tolower:%{User-Name}}}" I launched my FreeRADIUS server after ths. I have the following entry in my /etc/raddb/users file: ijk_user1 User-Password != "IJKpassword1" ijk_user1 Cleartext-Password := "IJKpassword1" With this, when I try to ssh as IJK_User1 (notice the mixed case) into a system that turns over authentication to my FreeRADIUS server, I get the following debugging information at this server: Sat Jun 11 11:02:25 2022 : Debug: (0) files: EXPAND %{%{Stripped-User-Name}:-%{tolower:%{User-Name}}} Sat Jun 11 11:02:25 2022 : Debug: (0) files: --> ijk_user1 Sat Jun 11 11:02:25 2022 : Debug: (0) files: users: Matched entry ijk_user1 at line 447 Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: returned from files (rlm_files) Sat Jun 11 11:02:25 2022 : Debug: (0) [files] = ok Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: calling expiration (rlm_expiration) Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: returned from expiration (rlm_expiration) Sat Jun 11 11:02:25 2022 : Debug: (0) [expiration] = noop Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: calling logintime (rlm_logintime) Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: returned from logintime (rlm_logintime) Sat Jun 11 11:02:25 2022 : Debug: (0) [logintime] = noop Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: calling pap (rlm_pap) Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authorize]: returned from pap (rlm_pap) Sat Jun 11 11:02:25 2022 : Debug: (0) [pap] = updated Sat Jun 11 11:02:25 2022 : Debug: (0) } # authorize = updated Sat Jun 11 11:02:25 2022 : Debug: (0) Found Auth-Type = PAP Sat Jun 11 11:02:25 2022 : Debug: (0) # Executing group from file /etc/raddb/sites-enabled/default Sat Jun 11 11:02:25 2022 : Debug: (0) Auth-Type PAP { Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authenticate]: calling pap (rlm_pap) Sat Jun 11 11:02:25 2022 : Debug: (0) pap: Login attempt with password "IJKpassword1" (12) Sat Jun 11 11:02:25 2022 : Debug: (0) pap: Comparing with "known good" Cleartext-Password "IJKpassword1" (12) Sat Jun 11 11:02:25 2022 : Debug: (0) pap: User authenticated successfully Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[authenticate]: returned from pap (rlm_pap) Sat Jun 11 11:02:25 2022 : Debug: (0) [pap] = ok Sat Jun 11 11:02:25 2022 : Debug: (0) } # Auth-Type PAP = ok Sat Jun 11 11:02:25 2022 : Debug: (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default Sat Jun 11 11:02:25 2022 : Debug: (0) post-auth { Sat Jun 11 11:02:25 2022 : Debug: (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { Sat Jun 11 11:02:25 2022 : Debug: (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE Sat Jun 11 11:02:25 2022 : Debug: (0) update { Sat Jun 11 11:02:25 2022 : Debug: (0) No attributes updated for RHS &session-state: Sat Jun 11 11:02:25 2022 : Debug: (0) } # update = noop Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[post-auth]: calling exec (rlm_exec) Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[post-auth]: returned from exec (rlm_exec) Sat Jun 11 11:02:25 2022 : Debug: (0) [exec] = noop Sat Jun 11 11:02:25 2022 : Debug: (0) policy remove_reply_message_if_eap { Sat Jun 11 11:02:25 2022 : Debug: (0) if (&reply:EAP-Message && &reply:Reply-Message) { Sat Jun 11 11:02:25 2022 : Debug: (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE Sat Jun 11 11:02:25 2022 : Debug: (0) else { Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[post-auth]: calling noop (rlm_always) Sat Jun 11 11:02:25 2022 : Debug: (0) modsingle[post-auth]: returned from noop (rlm_always) Sat Jun 11 11:02:25 2022 : Debug: (0) [noop] = noop Sat Jun 11 11:02:25 2022 : Debug: (0) } # else = noop Sat Jun 11 11:02:25 2022 : Debug: (0) } # policy remove_reply_message_if_eap = noop Sat Jun 11 11:02:25 2022 : Debug: (0) } # post-auth = noop Sat Jun 11 11:02:25 2022 : Debug: (0) Sent Access-Accept Id 64 from 192.168.0.55. 23:1812 to 192.168.0.66:60600 length 0 Which is fine: the user name gets converted from IJK_User1 to ijk_user1 and the authentication with password IJKpassword1 succeeds, as expected. I then changed the relevant entry in my /etc/raddb/users file as follows: IJK_User1 User-Password != "IJKpassword1" IJK_User1 Cleartext-Password := "IJKpassword1" After restarting the FreeRADIUS server I attempted the same log in as before. This is what I got in my traces: Sat Jun 11 11:48:54 2022 : Debug: (0) files: EXPAND %{%{Stripped-User-Name}:-%{tolower:%{User-Name}}} Sat Jun 11 11:48:54 2022 : Debug: (0) files: --> ijk_user1 Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: returned from files (rlm_files) Sat Jun 11 11:48:54 2022 : Debug: (0) [files] = noop Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: calling expiration (rlm_expiration) Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: returned from expiration (rlm_expiration) Sat Jun 11 11:48:54 2022 : Debug: (0) [expiration] = noop Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: calling logintime (rlm_logintime) Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: returned from logintime (rlm_logintime) Sat Jun 11 11:48:54 2022 : Debug: (0) [logintime] = noop Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: calling pap (rlm_pap) Sat Jun 11 11:48:54 2022 : WARNING: (0) pap: No "known good" password found for the user. Not setting Auth-Type Sat Jun 11 11:48:54 2022 : WARNING: (0) pap: Authentication will fail unless a "known good" password is available Sat Jun 11 11:48:54 2022 : Debug: (0) modsingle[authorize]: returned from pap (rlm_pap) Sat Jun 11 11:48:54 2022 : Debug: (0) [pap] = noop Sat Jun 11 11:48:54 2022 : Debug: (0) } # authorize = ok Sat Jun 11 11:48:54 2022 : ERROR: (0) No Auth-Type found: rejecting the user via Post-Auth-Type = Reject Sat Jun 11 11:48:54 2022 : Debug: (0) Failed to authenticate the user Sat Jun 11 11:48:54 2022 : Debug: (0) Using Post-Auth-Type Reject If I understand things correctly, the key = ... line that I added to the files file does indeed recast the incoming user name to lowercase. However, the FreeRADIUS server still compares incoming user names against those in the users file in a case sensitive way. This is fine, but not quite what I was looking for. Is it possible to get FreeRADIUS to compare user names (and user names alone - not passwords) in a real case-insensitive way against those in the /etc/raddb/users file?

4 6

MySQL Stored Procedure
by Aurélio de Souza Ribeiro Neto 11 Jun '22

11 Jun '22

Hello All, I'm using Freeradius 3.0.25-2 on Linux Ubunt and MySQL 5.7 and Mikrotik NAS Sometimes, if I have a energy fault on equipment, I have to many simultaneous authentication packets from same user. When it happens, the same user can use 2 ou more IPs from my Pool simultaneous. Is there a way to write a MySQL Stored Procedure to clean this faults? Someone can help-me with this? Thanks Aurélio

2 1

Releasing 3.0.26 and 3.2.0 soon
by Alan DeKok 11 Jun '22

11 Jun '22

We're going to release 3.0.26 and 3.2.0 in the near future. After months of work, they're finally ready for release. The delays were due to two issues. One was the release of OpenSSL3. It behaves differently than previous versions of OpenSSL, and it took a while to track down exactly what was going on. Thanks to Alex Clouter for patches. The second delay was due to Windows 11 inter-operability. We've been working closely with the Windows team to ensure that their software works with ours, and vice-versa. The use of TLS 1.3 complicates things, as TLS 1.3 is substantially different from earlier versions of TLS. Thanks again to Alex Clouter for testing and patches. We will be releasing 3.2.0 as the "new feature" branch of the v3 series. 3.2 will be 100% configuration compatible with 3.0, but will have new features which are not available in the main 3.0 release. We will be continuing to maintain 3.0 for the forseeable future. However, it will be "feature frozen". The only patches going into 3.0 will be bug fixes. This helps to ensure stability and low cost of maintenance. Matthew Newton is the v3 release manager, and can comment more if needed. Alan DeKok.

5 7

Python module for FreeRADIUS
by Klara Mall 09 Jun '22

09 Jun '22

Hi, does anybody know why there is no Debian package for the FreeRADIUS Python module in the networkradius.com Debian repository[0]? We use the Debian packages from networkradius.com and not from Debian itself to have the recent version running. But now we need the Python module and wonder why there's no Debian package there. Moreover the package in Debian itself depends on the version (= not >=) of the freeradius package, so it can't be installed with the newer recent freeradius package version. Does anybody has any hints on this? Best regards Klara [0] https://networkradius.com/packages/ -- Karlsruher Institut für Technologie (KIT) Steinbuch Centre for Computing (SCC) Klara Mall Abteilungsleiter Netze und Telekommunikation (NET) Zirkel 2, Geb. 20.21, R. 001.1 76131 Karlsruhe Telefon: +49 721 608-48946 E-Mail: klara.mall(a)kit.edu Web: http://www.scc.kit.edu Sitz der Körperschaft: Kaiserstraße 12, 76131 Karlsruhe KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft

2 3

MySQL Stored Procedure
by Aurélio de Souza Ribeiro Neto 09 Jun '22

09 Jun '22

1 0

Help - MySQL Stored Procedure
by Aurélio de Souza Ribeiro Neto 09 Jun '22

09 Jun '22

2 1

Support for blank password in EAP/PEAP
by sachin shetty 09 Jun '22

09 Jun '22

Hello, I'm using freeradius for VPN and WIFI clients implementing a passwordless solution where users are only required to enter the username, and I want to authenticate users using MFA. I achieved the same using the VPN client as it uses PAP, and it succeeded. Whereas wrt to Wifi client where it uses EAP/PEAP; I'm observing the communication ends at Access-Challenge sent from radius server. i.e., the wifi client doesn't acknowledge the Challenge and ends up with a Login error. I took the TCP dump and verified Access-Challenge attributes in working and non-working scenarios, and I see the number of attributes sent is the same (although not sure of the value) I even tried to set NT:Password to empty String md5 value ( 0x31D6CFE0D16AE931B73C59D7E0C089C0), still vain attempt. Since the password is not received in the auth request and Challenge doesn't have the same information, does the wifi client ends the communication as soon as it receives Challenge? NOTE: The server certificate was imported and trusted before trying this operation and still when a blank password is sent in the Radius auth request, the handshake between client and server stops when the last Challenge is sent from the radius server. Is this a valid scenario with what I'm trying to wrt the EAP/PEAP protocol? Thanks, Sachin

2 1

RHEL 8, FreeRADIUS. LDAP, and Active Directory
by White, Daniel E. (GSFC-770.0)[AEGIS] 06 Jun '22

06 Jun '22

I am closer, but not quite there. I got "radtest -x <user> <clear text password> localhost 0 testing123" to work. I do not want passwords spewing over the network in cleartext, but I cannot get "radtest -x -t mschap <user> <clear text password> localhost 0 testing123" working. I get this is the server output: (0) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (0) mschap: Client is using MS-CHAPv1 with NT-Password (0) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (0) mschap: ERROR: MS-CHAP2-Response is incorrect I tried looking for a way to force mschapv2 but could find nothing. I tried using "{nthash}..." for the password after finding smbencrypt, but no joy. How do I either pass in an NT Password or get FR to encrypt the Cleartext-Password given ?

2 1

3.2.0: TLS-* attributes for incoming and outgoing RadSec connections
by Stefan Winter 03 Jun '22

03 Jun '22

Hello, while playing with RadSec inbound and outbound I noticed that for both directions, the cert properties of the other end are stored in a series of TLS-Client-Cert-* attributes. But when initiating an outbound connection, these attributes store the properties of the *server* we are contacting, while the name suggests something about client (which would be our own cert, which is useless). Example: (TLS) Trying new outgoing proxy connection to proxy (0.0.0.0, 0) -> home_server (145.100.189.5, 2083) Requiring Server certificate [...] (0) TLS-Client-Cert-Common-Name := "slagroom.eduroam.nl" That should really be TLS-Server-Cert-Common-Name (same goes for all other properties of course). In the other direction, i.e. when serving an incoming client connection, the use of the -Client- attributes is of course semantically correct. Could these attributes be duplicated for -Server and be populated as such during outbound connections? Greetings, Stefan Winter -- This email may contain information for limited distribution only, please treat accordingly. Fondation Restena, Stefan WINTER Chief Technology Officer 2, avenue de l'Université L-4365 Esch-sur-Alzette

2 3

Framed-Route not appearing on the client
by Alexis Lacoste 03 Jun '22

03 Jun '22

Good afternoon, After I resolved the issue with the IP address not being present on the client with Framed-IP-Address, I needed for the client to get a gateway to the corresponding subnet. Without that gateway, the client doesn't know where to go when it arrives on the public interface. I've looked at https://freeradius.org/rfc/rfc2865.html#Framed-Route and took the example below without adding metric options. test1.vpn Service-Type == Framed-User Framed-IP-Address += 10.10.10.6, Framed-Route += "172.16.10.0/24 172.16.10.254", Framed-IP-Netmask += 255.255.255.0, Fall-Through = Yes I've also tried "172.16.10.0 172.16.10.254", "172.16.10.0/24 172.16.10.254 1 2 -1 3 400" but when doing ipconfig, there is no change nor route added with route print. Here are the radiusd -X log : (1) Received Access-Request Id 110 from 127.0.0.1:39643 to 127.0.0.1:1812 length 169 (1) User-Name = "test1.vpn" (1) NAS-Port-Type = Virtual (1) Service-Type = Framed-User (1) NAS-Port = 23 (1) NAS-Port-Id = "test1.vpn" (1) NAS-IP-Address = X.X.X.220 (1) Called-Station-Id = "X.X.X.220[4500]" (1) Calling-Station-Id = "X.X.X.211[4500]" (1) Acct-Session-Id = "1654243660-23" (1) EAP-Message = 0x0200000e0174657374312e76706e (1) NAS-Identifier = "strongSwan" (1) Message-Authenticator = 0xf9c61265bceb4790a3b47226f48e2c0e (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) files: users: Matched entry test1.vpn at line 3 (1) [files] = ok (1) [preprocess] = ok (1) [mschap] = noop (1) eap: Peer sent EAP Response (code 2) ID 0 length 14 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 1 length 22 (1) eap: EAP session adding &reply:State = 0x1ee1c2c31ee0c6b6 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 110 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (1) Framed-IP-Address = 10.10.10.6 (1) Framed-Route = "172.16.10.0/24 172.16.10.254" (1) Framed-IP-Netmask = 255.255.255.0 (1) EAP-Message = 0x01010016041090b5fda5bb3dcbe908a3f3380788de98 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x1ee1c2c31ee0c6b67da4e0496fb672ca (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 111 from 127.0.0.1:39643 to 127.0.0.1:1812 length 179 (2) User-Name = "test1.vpn" (2) NAS-Port-Type = Virtual (2) Service-Type = Framed-User (2) NAS-Port = 23 (2) NAS-Port-Id = "test1.vpn" (2) NAS-IP-Address = X.X.X.220 (2) Called-Station-Id = "X.X.X.220[4500]" (2) Calling-Station-Id = "X.X.X.211[4500]" (2) Acct-Session-Id = "1654243660-23" (2) EAP-Message = 0x020100060319 (2) NAS-Identifier = "strongSwan" (2) State = 0x1ee1c2c31ee0c6b67da4e0496fb672ca (2) Message-Authenticator = 0x7fb7e39123c77d8bf07ba2d89019a7f6 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) files: users: Matched entry test1.vpn at line 3 (2) [files] = ok (2) [preprocess] = ok (2) [mschap] = noop (2) eap: Peer sent EAP Response (code 2) ID 1 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [expiration] = noop (2) [logintime] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x1ee1c2c31ee0c6b6 (2) eap: Finished EAP session with state 0x1ee1c2c31ee0c6b6 (2) eap: Previous EAP request found for state 0x1ee1c2c31ee0c6b6, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 2 length 6 (2) eap: EAP session adding &reply:State = 0x1ee1c2c31fe3dbb6 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 111 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (2) Framed-IP-Address = 10.10.10.6 (2) Framed-Route = "172.16.10.0/24 172.16.10.254" (2) Framed-IP-Netmask = 255.255.255.0 (2) EAP-Message = 0x010200061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x1ee1c2c31fe3dbb67da4e0496fb672ca (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 112 from 127.0.0.1:39643 to 127.0.0.1:1812 length 345 (3) User-Name = "test1.vpn" (3) NAS-Port-Type = Virtual (3) Service-Type = Framed-User (3) NAS-Port = 23 (3) NAS-Port-Id = "test1.vpn" (3) NAS-IP-Address = X.X.X.220 (3) Called-Station-Id = "X.X.X.220[4500]" (3) Calling-Station-Id = "X.X.X.211[4500]" (3) Acct-Session-Id = "1654243660-23" (3) EAP-Message = 0x020200ac1980000000a2160303009d0100009903036299fd276a1f5725294c54bbe39e76a2b6b0fd113394be604d5a58554580473400002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100 (3) NAS-Identifier = "strongSwan" (3) State = 0x1ee1c2c31fe3dbb67da4e0496fb672ca (3) Message-Authenticator = 0xad9955152429f7011a592db314060109 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) files: users: Matched entry test1.vpn at line 3 (3) [files] = ok (3) [preprocess] = ok (3) [mschap] = noop (3) eap: Peer sent EAP Response (code 2) ID 2 length 172 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x1ee1c2c31fe3dbb6 (3) eap: Finished EAP session with state 0x1ee1c2c31fe3dbb6 (3) eap: Previous EAP request found for state 0x1ee1c2c31fe3dbb6, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 162 bytes (3) eap_peap: Got complete TLS record (162 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: <<< recv TLS 1.3 [length 009d] (3) eap_peap: TLS_accept: SSLv3/TLS read client hello (3) eap_peap: >>> send TLS 1.2 [length 003d] (3) eap_peap: TLS_accept: SSLv3/TLS write server hello (3) eap_peap: >>> send TLS 1.2 [length 0a0e] (3) eap_peap: TLS_accept: SSLv3/TLS write certificate (3) eap_peap: >>> send TLS 1.2 [length 024d] (3) eap_peap: TLS_accept: SSLv3/TLS write key exchange (3) eap_peap: >>> send TLS 1.2 [length 0004] (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: TLS - In Handshake Phase (3) eap_peap: TLS - got 3248 bytes of data (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 3 length 1004 (3) eap: EAP session adding &reply:State = 0x1ee1c2c31ce2dbb6 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 112 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (3) Framed-IP-Address = 10.10.10.6 (3) Framed-Route = "172.16.10.0/24 172.16.10.254" (3) Framed-IP-Netmask = 255.255.255.0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x1ee1c2c31ce2dbb67da4e0496fb672ca (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 113 from 127.0.0.1:39643 to 127.0.0.1:1812 length 179 (4) User-Name = "test1.vpn" (4) NAS-Port-Type = Virtual (4) Service-Type = Framed-User (4) NAS-Port = 23 (4) NAS-Port-Id = "test1.vpn" (4) NAS-IP-Address = X.X.X.220 (4) Called-Station-Id = "X.X.X.220[4500]" (4) Calling-Station-Id = "X.X.X.11[4500]" (4) Acct-Session-Id = "1654243660-23" (4) EAP-Message = 0x020300061900 (4) NAS-Identifier = "strongSwan" (4) State = 0x1ee1c2c31ce2dbb67da4e0496fb672ca (4) Message-Authenticator = 0xe9255862a72fdefe69d2869cdb9daa64 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) files: users: Matched entry test1.vpn at line 3 (4) [files] = ok (4) [preprocess] = ok (4) [mschap] = noop (4) eap: Peer sent EAP Response (code 2) ID 3 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x1ee1c2c31ce2dbb6 (4) eap: Finished EAP session with state 0x1ee1c2c31ce2dbb6 (4) eap: Previous EAP request found for state 0x1ee1c2c31ce2dbb6, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 4 length 1000 (4) eap: EAP session adding &reply:State = 0x1ee1c2c31de5dbb6 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 113 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (4) Framed-IP-Address = 10.10.10.6 (4) Framed-Route = "172.16.10.0/24 172.16.10.254" (4) Framed-IP-Netmask = 255.255.255.0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x1ee1c2c31de5dbb67da4e0496fb672ca (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 114 from 127.0.0.1:39643 to 127.0.0.1:1812 length 179 (5) User-Name = "test1.vpn" (5) NAS-Port-Type = Virtual (5) Service-Type = Framed-User (5) NAS-Port = 23 (5) NAS-Port-Id = "test1.vpn" (5) NAS-IP-Address = X.X.X.220 (5) Called-Station-Id = "X.X.X.20[4500]" (5) Calling-Station-Id = "X.X.X.211[4500]" (5) Acct-Session-Id = "1654243660-23" (5) EAP-Message = 0x020400061900 (5) NAS-Identifier = "strongSwan" (5) State = 0x1ee1c2c31de5dbb67da4e0496fb672ca (5) Message-Authenticator = 0xea650ae4362cd184b3f28cddf49ad01c (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) files: users: Matched entry test1.vpn at line 3 (5) [files] = ok (5) [preprocess] = ok (5) [mschap] = noop (5) eap: Peer sent EAP Response (code 2) ID 4 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x1ee1c2c31de5dbb6 (5) eap: Finished EAP session with state 0x1ee1c2c31de5dbb6 (5) eap: Previous EAP request found for state 0x1ee1c2c31de5dbb6, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment (5) eap_peap: [eaptls verify] = request (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 5 length 1000 (5) eap: EAP session adding &reply:State = 0x1ee1c2c31ae4dbb6 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 114 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (5) Framed-IP-Address = 10.10.10.6 (5) Framed-Route = "172.16.10.0/24 172.16.10.254" (5) Framed-IP-Netmask = 255.255.255.0 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x1ee1c2c31ae4dbb67da4e0496fb672ca (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 115 from 127.0.0.1:39643 to 127.0.0.1:1812 length 179 (6) User-Name = "test1.vpn" (6) NAS-Port-Type = Virtual (6) Service-Type = Framed-User (6) NAS-Port = 23 (6) NAS-Port-Id = "test1.vpn" (6) NAS-IP-Address = X.X.X.220 (6) Called-Station-Id = "X.X.X.220[4500]" (6) Calling-Station-Id = "X.X.X.211[4500]" (6) Acct-Session-Id = "1654243660-23" (6) EAP-Message = 0x020500061900 (6) NAS-Identifier = "strongSwan" (6) State = 0x1ee1c2c31ae4dbb67da4e0496fb672ca (6) Message-Authenticator = 0x20f1a93bf98ff703c88607c5af6b39a3 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) files: users: Matched entry test1.vpn at line 3 (6) [files] = ok (6) [preprocess] = ok (6) [mschap] = noop (6) eap: Peer sent EAP Response (code 2) ID 5 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x1ee1c2c31ae4dbb6 (6) eap: Finished EAP session with state 0x1ee1c2c31ae4dbb6 (6) eap: Previous EAP request found for state 0x1ee1c2c31ae4dbb6, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment (6) eap_peap: [eaptls verify] = request (6) eap_peap: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 6 length 272 (6) eap: EAP session adding &reply:State = 0x1ee1c2c31be7dbb6 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 115 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (6) Framed-IP-Address = 10.10.10.6 (6) Framed-Route = "172.16.10.0/24 172.16.10.254" (6) Framed-IP-Netmask = 255.255.255.0 (6) EAP-Message = 0x01060110190045bbfea2a25b7e8d465f85db19d2c6adfcb56236fac607577500c9b037a86352ccf4dc51670cd331c20645898a411eb323c8bc56990eaff47e887dbfcaebdf5fdc625ef603c8071df374c07b34eaea9ca7556fac9c0fef6682cb69e5d7b6f4339ca198964a982d1f0071688c2f4478c76680dc14d8b72345e7e8bfcd3489a6174dbc15fb90ca991335861b23d2954940d70e68a2225e0145878ac9e3572c8608ac1c761a4748e153c6fa88d7ee6a116013bbf2c53b46015cbd3791b5810a12a4e84d5c599b35cfe1f0117c1ddf5ad5cb7bee5fde466be44ef29bf99204ee193662f60e6f9732be198cbb1d05b7649587c1c721bbef2cd8bc55f07ef4d7746ae38316030300040e000000 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x1ee1c2c31be7dbb67da4e0496fb672ca (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 116 from 127.0.0.1:39643 to 127.0.0.1:1812 length 309 (7) User-Name = "test1.vpn" (7) NAS-Port-Type = Virtual (7) Service-Type = Framed-User (7) NAS-Port = 23 (7) NAS-Port-Id = "test1.vpn" (7) NAS-IP-Address = X.X.X.220 (7) Called-Station-Id = "X.X.X.220[4500]" (7) Calling-Station-Id = "X.X.X.211[4500]" (7) Acct-Session-Id = "1654243660-23" (7) EAP-Message = 0x0206008819800000007e1603030046100000424104350848568eed83f107ec16f596aaac42de6ef55ab0b47108ddc32b1d0118178e819ea7f7fe7c22300f7a04817c3e3064a1d4124cf58a5d16433363f8b6c35c3b14030300010116030300280000000000000000d888cc0cad9ea9fd18e1a0e0812250561ed19861ad2fadbf6cfbc0e25c621fc2 (7) NAS-Identifier = "strongSwan" (7) State = 0x1ee1c2c31be7dbb67da4e0496fb672ca (7) Message-Authenticator = 0x182aa5d5b9286e3520dacd1462d67272 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) files: users: Matched entry test1.vpn at line 3 (7) [files] = ok (7) [preprocess] = ok (7) [mschap] = noop (7) eap: Peer sent EAP Response (code 2) ID 6 length 136 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x1ee1c2c31be7dbb6 (7) eap: Finished EAP session with state 0x1ee1c2c31be7dbb6 (7) eap: Previous EAP request found for state 0x1ee1c2c31be7dbb6, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer indicated complete TLS record size will be 126 bytes (7) eap_peap: Got complete TLS record (126 bytes) (7) eap_peap: [eaptls verify] = length included (7) eap_peap: TLS_accept: SSLv3/TLS write server done (7) eap_peap: <<< recv TLS 1.2 [length 0046] (7) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (7) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (7) eap_peap: <<< recv TLS 1.2 [length 0010] (7) eap_peap: TLS_accept: SSLv3/TLS read finished (7) eap_peap: >>> send TLS 1.2 [length 0001] (7) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (7) eap_peap: >>> send TLS 1.2 [length 0010] (7) eap_peap: TLS_accept: SSLv3/TLS write finished (7) eap_peap: (other): SSL negotiation finished successfully (7) eap_peap: TLS - Connection Established (7) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) eap_peap: TLS-Session-Version = "TLS 1.2" (7) eap_peap: TLS - got 51 bytes of data (7) eap_peap: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 7 length 57 (7) eap: EAP session adding &reply:State = 0x1ee1c2c318e6dbb6 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/raddb/sites-enabled/default (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 116 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (7) Framed-IP-Address = 10.10.10.6 (7) Framed-Route = "172.16.10.0/24 172.16.10.254" (7) Framed-IP-Netmask = 255.255.255.0 (7) EAP-Message = 0x01070039190014030300010116030300289e5cd13943bc517eff9a9cf4bcdb9fa2988a382c89f04e68524617ba480dfc733454c4394c3cda2d (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x1ee1c2c318e6dbb67da4e0496fb672ca (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 117 from 127.0.0.1:39643 to 127.0.0.1:1812 length 179 (8) User-Name = "test1.vpn" (8) NAS-Port-Type = Virtual (8) Service-Type = Framed-User (8) NAS-Port = 23 (8) NAS-Port-Id = "test1.vpn" (8) NAS-IP-Address = X.X.X.220 (8) Called-Station-Id = "X.X.X.220[4500]" (8) Calling-Station-Id = "X.X.X.211[4500]" (8) Acct-Session-Id = "1654243660-23" (8) EAP-Message = 0x020700061900 (8) NAS-Identifier = "strongSwan" (8) State = 0x1ee1c2c318e6dbb67da4e0496fb672ca (8) Message-Authenticator = 0x87ca357171c042c52eae09a2fdad8fd4 (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) files: users: Matched entry test1.vpn at line 3 (8) [files] = ok (8) [preprocess] = ok (8) [mschap] = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 6 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x1ee1c2c318e6dbb6 (8) eap: Finished EAP session with state 0x1ee1c2c318e6dbb6 (8) eap: Previous EAP request found for state 0x1ee1c2c318e6dbb6, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: Peer ACKed our handshake fragment. handshake is finished (8) eap_peap: [eaptls verify] = success (8) eap_peap: [eaptls process] = success (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state TUNNEL ESTABLISHED (8) eap: Sending EAP Request (code 1) ID 8 length 40 (8) eap: EAP session adding &reply:State = 0x1ee1c2c319e9dbb6 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/raddb/sites-enabled/default (8) session-state: Saving cached attributes (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 117 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (8) Framed-IP-Address = 10.10.10.6 (8) Framed-Route = "172.16.10.0/24 172.16.10.254" (8) Framed-IP-Netmask = 255.255.255.0 (8) EAP-Message = 0x010800281900170303001d9e5cd13943bc517f1ca9c374ef3b22325c3209c2e3d6adb4d0ef3ace0c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x1ee1c2c319e9dbb67da4e0496fb672ca (8) Finished request Waking up in 4.9 seconds. (9) Received Access-Request Id 118 from 127.0.0.1:39643 to 127.0.0.1:1812 length 218 (9) User-Name = "test1.vpn" (9) NAS-Port-Type = Virtual (9) Service-Type = Framed-User (9) NAS-Port = 23 (9) NAS-Port-Id = "test1.vpn" (9) NAS-IP-Address = X.X.X.220 (9) Called-Station-Id = "X.X.X.220[4500]" (9) Calling-Station-Id = "X.X.X.211[4500]" (9) Acct-Session-Id = "1654243660-23" (9) EAP-Message = 0x0208002d190017030300220000000000000001477baf4933f3c4877115c28e5e2c234662d5e7dc19c58d0ff202 (9) NAS-Identifier = "strongSwan" (9) State = 0x1ee1c2c319e9dbb67da4e0496fb672ca (9) Message-Authenticator = 0x8fb59e4cd4bfb6499fd57e90219e1015 (9) Restoring &session-state (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) files: users: Matched entry test1.vpn at line 3 (9) [files] = ok (9) [preprocess] = ok (9) [mschap] = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 45 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x1ee1c2c319e9dbb6 (9) eap: Finished EAP session with state 0x1ee1c2c319e9dbb6 (9) eap: Previous EAP request found for state 0x1ee1c2c319e9dbb6, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state WAITING FOR INNER IDENTITY (9) eap_peap: Identity - test1.vpn (9) eap_peap: Got inner identity 'test1.vpn' (9) eap_peap: Setting default EAP type for tunneled EAP session (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x0208000e0174657374312e76706e (9) eap_peap: Setting User-Name to test1.vpn (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x0208000e0174657374312e76706e (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "test1.vpn" (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x0208000e0174657374312e76706e (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "test1.vpn" (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [mschap] = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 14 (9) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Peer sent packet with method EAP Identity (1) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: Issuing Challenge (9) eap: Sending EAP Request (code 1) ID 9 length 43 (9) eap: EAP session adding &reply:State = 0x77d61e8777df0400 (9) [eap] = handled (9) } # authenticate = handled (9) } # server inner-tunnel (9) Virtual server sending reply (9) EAP-Message = 0x0109002b1a0109002610f3f955ef73c249d34cc08653d38cf2e1667265657261646975732d332e302e3230 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x77d61e8777df0400aa8dafc0f122a1ae (9) eap_peap: Got tunneled reply code 11 (9) eap_peap: EAP-Message = 0x0109002b1a0109002610f3f955ef73c249d34cc08653d38cf2e1667265657261646975732d332e302e3230 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0x77d61e8777df0400aa8dafc0f122a1ae (9) eap_peap: Got tunneled reply RADIUS code 11 (9) eap_peap: EAP-Message = 0x0109002b1a0109002610f3f955ef73c249d34cc08653d38cf2e1667265657261646975732d332e302e3230 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0x77d61e8777df0400aa8dafc0f122a1ae (9) eap_peap: Got tunneled Access-Challenge (9) eap: Sending EAP Request (code 1) ID 9 length 74 (9) eap: EAP session adding &reply:State = 0x1ee1c2c316e8dbb6 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) Post-Auth-Type sub-section not found. Ignoring. (9) # Executing group from file /etc/raddb/sites-enabled/default (9) session-state: Saving cached attributes (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 118 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (9) Framed-IP-Address = 10.10.10.6 (9) Framed-Route = "172.16.10.0/24 172.16.10.254" (9) Framed-IP-Netmask = 255.255.255.0 (9) EAP-Message = 0x0109004a1900170303003f9e5cd13943bc51807d6489913fdb112a1ac5f51887be8e53c2db8b26c3e19c0680cc9e3070e835df3c6fed3a82ea228f01962130d389d61ed1461f8d86452c (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x1ee1c2c316e8dbb67da4e0496fb672ca (9) Finished request Waking up in 4.9 seconds. (10) Received Access-Request Id 119 from 127.0.0.1:39643 to 127.0.0.1:1812 length 272 (10) User-Name = "test1.vpn" (10) NAS-Port-Type = Virtual (10) Service-Type = Framed-User (10) NAS-Port = 23 (10) NAS-Port-Id = "test1.vpn" (10) NAS-IP-Address = X.X.X.220 (10) Called-Station-Id = "X.X.X.220[4500]" (10) Calling-Station-Id = "X.X.X.211[4500]" (10) Acct-Session-Id = "1654243660-23" (10) EAP-Message = 0x02090063190017030300580000000000000002a2cc1798c3785a7dd9aec21bf28e16fc97365825b7ac6559c3134aff1f443e5e1680ad67a304ace789531e464b1afdcd3b20c0d5dafd9a0b1a9cfcc164adf2d449a8662c460150ee7a9b98a035ee7285 (10) NAS-Identifier = "strongSwan" (10) State = 0x1ee1c2c316e8dbb67da4e0496fb672ca (10) Message-Authenticator = 0x825d8ace59e7de2fe46bf97ee5bf0b3e (10) Restoring &session-state (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) files: users: Matched entry test1.vpn at line 3 (10) [files] = ok (10) [preprocess] = ok (10) [mschap] = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 99 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x77d61e8777df0400 (10) eap: Finished EAP session with state 0x1ee1c2c316e8dbb6 (10) eap: Previous EAP request found for state 0x1ee1c2c316e8dbb6, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state phase2 (10) eap_peap: EAP method MSCHAPv2 (26) (10) eap_peap: Got tunneled request (10) eap_peap: EAP-Message = 0x020900441a0209003f3142e5d9b195ccee99d43e70b16db5d6f50000000000000000ec7383cd297a92e7054e42ca28029f0abf7a912249fb42e40074657374312e76706e (10) eap_peap: Setting User-Name to test1.vpn (10) eap_peap: Sending tunneled request to inner-tunnel (10) eap_peap: EAP-Message = 0x020900441a0209003f3142e5d9b195ccee99d43e70b16db5d6f50000000000000000ec7383cd297a92e7054e42ca28029f0abf7a912249fb42e40074657374312e76706e (10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (10) eap_peap: User-Name = "test1.vpn" (10) eap_peap: State = 0x77d61e8777df0400aa8dafc0f122a1ae (10) Virtual server inner-tunnel received request (10) EAP-Message = 0x020900441a0209003f3142e5d9b195ccee99d43e70b16db5d6f50000000000000000ec7383cd297a92e7054e42ca28029f0abf7a912249fb42e40074657374312e76706e (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "test1.vpn" (10) State = 0x77d61e8777df0400aa8dafc0f122a1ae (10) WARNING: Outer and inner identities are the same. User privacy is compromised. (10) server inner-tunnel { (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [mschap] = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 68 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) [files] = noop (10) [expiration] = noop (10) [logintime] = noop Not doing PAP as Auth-Type is already set. (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) authenticate { (10) eap: Expiring EAP session with state 0x77d61e8777df0400 (10) eap: Finished EAP session with state 0x77d61e8777df0400 (10) eap: Previous EAP request found for state 0x77d61e8777df0400, released from the list (10) eap: Peer sent packet with method EAP MSCHAPv2 (26) (10) eap: Calling submodule eap_mschapv2 to process data (10) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) eap_mschapv2: authenticate { (10) mschap: Creating challenge hash with username: test1.vpn (10) mschap: Client is using MS-CHAPv2 (10) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{mschap:User-Name} --domain=BRANCHET --challenge=%{mschap:Challenge:-01} --nt-response=%{mschap:NT-Response:-00}: (10) mschap: EXPAND --username=%{mschap:User-Name} (10) mschap: --> --username=test1.vpn (10) mschap: Creating challenge hash with username: test1.vpn (10) mschap: EXPAND --challenge=%{mschap:Challenge:-01} (10) mschap: --> --challenge=6bdb0d44a5236820 (10) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00} (10) mschap: --> --nt-response=ec7383cd297a92e7054e42ca28029f0abf7a912249fb42e4 lpcfg_do_global_parameter: WARNING: The "domain logons" option is deprecated added interface ens3 ip=172.16.10.111 bcast=172.16.10.255 netmask=255.255.255.0 added interface ens4 ip=X.X.X.220 bcast=X.X.X.223 netmask=255.255.255.224 lp_load_ex: refreshing parameters Initialising global parameters rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[global]" lpcfg_do_global_parameter: WARNING: The "domain logons" option is deprecated added interface ens3 ip=172.16.10.111 bcast=172.16.10.255 netmask=255.255.255.0 added interface ens4 ip=X.X.X.220 bcast=X.X.X.223 netmask=255.255.255.224 lp_load_ex: refreshing parameters Initialising global parameters rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[global]" lpcfg_do_global_parameter: WARNING: The "domain logons" option is deprecated added interface ens3 ip=172.16.10.111 bcast=172.16.10.255 netmask=255.255.255.0 added interface ens4 ip=X.X.X.220 bcast=X.X.X.223 netmask=255.255.255.224 (10) mschap: Program returned code (0) and output 'NT_KEY: 6F5564CE191F31EAC91AE7DAFA4E36FE' (10) mschap: Adding MS-CHAPv2 MPPE keys (10) eap_mschapv2: [mschap] = ok (10) eap_mschapv2: } # authenticate = ok (10) eap_mschapv2: MSCHAP Success (10) eap: Sending EAP Request (code 1) ID 10 length 51 (10) eap: EAP session adding &reply:State = 0x77d61e8776dc0400 (10) [eap] = handled (10) } # authenticate = handled (10) } # server inner-tunnel (10) Virtual server sending reply (10) EAP-Message = 0x010a00331a0309002e533d41324131423732333038393939463532333138453331383439443931413235433841353138444246 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x77d61e8776dc0400aa8dafc0f122a1ae (10) eap_peap: Got tunneled reply code 11 (10) eap_peap: EAP-Message = 0x010a00331a0309002e533d41324131423732333038393939463532333138453331383439443931413235433841353138444246 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x77d61e8776dc0400aa8dafc0f122a1ae (10) eap_peap: Got tunneled reply RADIUS code 11 (10) eap_peap: EAP-Message = 0x010a00331a0309002e533d41324131423732333038393939463532333138453331383439443931413235433841353138444246 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x77d61e8776dc0400aa8dafc0f122a1ae (10) eap_peap: Got tunneled Access-Challenge (10) eap: Sending EAP Request (code 1) ID 10 length 82 (10) eap: EAP session adding &reply:State = 0x1ee1c2c317ebdbb6 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) Post-Auth-Type sub-section not found. Ignoring. (10) # Executing group from file /etc/raddb/sites-enabled/default (10) session-state: Saving cached attributes (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) Sent Access-Challenge Id 119 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (10) Framed-IP-Address = 10.10.10.6 (10) Framed-Route = "172.16.10.0/24 172.16.10.254" (10) Framed-IP-Netmask = 255.255.255.0 (10) EAP-Message = 0x010a0052190017030300479e5cd13943bc518136eddfd30e4a130aa1b816b1a5bac0aed321dc3a80883d878486214198fedbabf9630e53826282e5335243a14ea3b0d33e6ee214eaee656c5d9324da46c6d2 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x1ee1c2c317ebdbb67da4e0496fb672ca (10) Finished request Waking up in 4.7 seconds. (11) Received Access-Request Id 120 from 127.0.0.1:39643 to 127.0.0.1:1812 length 210 (11) User-Name = "test1.vpn" (11) NAS-Port-Type = Virtual (11) Service-Type = Framed-User (11) NAS-Port = 23 (11) NAS-Port-Id = "test1.vpn" (11) NAS-IP-Address = X.X.X.220 (11) Called-Station-Id = "X.X.X.220[4500]" (11) Calling-Station-Id = "X.X.X.211[4500]" (11) Acct-Session-Id = "1654243660-23" (11) EAP-Message = 0x020a00251900170303001a0000000000000003b2b96f8f71d71744735da3f7898a5dba681b (11) NAS-Identifier = "strongSwan" (11) State = 0x1ee1c2c317ebdbb67da4e0496fb672ca (11) Message-Authenticator = 0x288e9dc84922a54c0cc6ea5663be4b40 (11) Restoring &session-state (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) files: users: Matched entry test1.vpn at line 3 (11) [files] = ok (11) [preprocess] = ok (11) [mschap] = noop (11) eap: Peer sent EAP Response (code 2) ID 10 length 37 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x77d61e8776dc0400 (11) eap: Finished EAP session with state 0x1ee1c2c317ebdbb6 (11) eap: Previous EAP request found for state 0x1ee1c2c317ebdbb6, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Continuing EAP-TLS (11) eap_peap: [eaptls verify] = ok (11) eap_peap: Done initial handshake (11) eap_peap: [eaptls process] = ok (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state phase2 (11) eap_peap: EAP method MSCHAPv2 (26) (11) eap_peap: Got tunneled request (11) eap_peap: EAP-Message = 0x020a00061a03 (11) eap_peap: Setting User-Name to test1.vpn (11) eap_peap: Sending tunneled request to inner-tunnel (11) eap_peap: EAP-Message = 0x020a00061a03 (11) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_peap: User-Name = "test1.vpn" (11) eap_peap: State = 0x77d61e8776dc0400aa8dafc0f122a1ae (11) Virtual server inner-tunnel received request (11) EAP-Message = 0x020a00061a03 (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) User-Name = "test1.vpn" (11) State = 0x77d61e8776dc0400aa8dafc0f122a1ae (11) WARNING: Outer and inner identities are the same. User privacy is compromised. (11) server inner-tunnel { (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [mschap] = noop (11) eap: Peer sent EAP Response (code 2) ID 10 length 6 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) [files] = noop (11) [expiration] = noop (11) [logintime] = noop Not doing PAP as Auth-Type is already set. (11) [pap] = noop (11) } # authorize = updated (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (11) authenticate { (11) eap: Expiring EAP session with state 0x77d61e8776dc0400 (11) eap: Finished EAP session with state 0x77d61e8776dc0400 (11) eap: Previous EAP request found for state 0x77d61e8776dc0400, released from the list (11) eap: Peer sent packet with method EAP MSCHAPv2 (26) (11) eap: Calling submodule eap_mschapv2 to process data (11) eap: Sending EAP Success (code 3) ID 10 length 4 (11) eap: Freeing handler (11) [eap] = ok (11) } # authenticate = ok (11) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (11) post-auth { (11) update { (11) &outer.session-state::MS-MPPE-Encryption-Policy += &reply:MS-MPPE-Encryption-Policy[*] -> Encryption-Allowed (11) &outer.session-state::MS-MPPE-Encryption-Types += &reply:MS-MPPE-Encryption-Types[*] -> RC4-40or128-bit-Allowed (11) &outer.session-state::MS-MPPE-Send-Key += &reply:MS-MPPE-Send-Key[*] -> 0xc95e91e5d6d75a41ddedeb1d410b74dc (11) &outer.session-state::MS-MPPE-Recv-Key += &reply:MS-MPPE-Recv-Key[*] -> 0xf03d8d652f0906ecde38699a80de028f (11) &outer.session-state::EAP-Message += &reply:EAP-Message[*] -> 0x030a0004 (11) &outer.session-state::Message-Authenticator += &reply:Message-Authenticator[*] -> 0x00000000000000000000000000000000 (11) &outer.session-state::User-Name += &reply:User-Name[*] -> 'test1.vpn' (11) } # update = noop (11) update outer.session-state { (11) MS-MPPE-Encryption-Policy !* ANY (11) MS-MPPE-Encryption-Types !* ANY (11) MS-MPPE-Send-Key !* ANY (11) MS-MPPE-Recv-Key !* ANY (11) Message-Authenticator !* ANY (11) EAP-Message !* ANY (11) Proxy-State !* ANY (11) } # update outer.session-state = noop (11) } # post-auth = noop (11) } # server inner-tunnel (11) Virtual server sending reply (11) MS-MPPE-Encryption-Policy = Encryption-Allowed (11) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) MS-MPPE-Send-Key = 0xc95e91e5d6d75a41ddedeb1d410b74dc (11) MS-MPPE-Recv-Key = 0xf03d8d652f0906ecde38699a80de028f (11) EAP-Message = 0x030a0004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "test1.vpn" (11) eap_peap: Got tunneled reply code 2 (11) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (11) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) eap_peap: MS-MPPE-Send-Key = 0xc95e91e5d6d75a41ddedeb1d410b74dc (11) eap_peap: MS-MPPE-Recv-Key = 0xf03d8d652f0906ecde38699a80de028f (11) eap_peap: EAP-Message = 0x030a0004 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: User-Name = "test1.vpn" (11) eap_peap: Got tunneled reply RADIUS code 2 (11) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (11) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (11) eap_peap: MS-MPPE-Send-Key = 0xc95e91e5d6d75a41ddedeb1d410b74dc (11) eap_peap: MS-MPPE-Recv-Key = 0xf03d8d652f0906ecde38699a80de028f (11) eap_peap: EAP-Message = 0x030a0004 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: User-Name = "test1.vpn" (11) eap_peap: Tunneled authentication was successful (11) eap_peap: SUCCESS (11) eap: Sending EAP Request (code 1) ID 11 length 46 (11) eap: EAP session adding &reply:State = 0x1ee1c2c314eadbb6 (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) Post-Auth-Type sub-section not found. Ignoring. (11) # Executing group from file /etc/raddb/sites-enabled/default (11) session-state: Saving cached attributes (11) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) TLS-Session-Version = "TLS 1.2" (11) User-Name += "test1.vpn" (11) Sent Access-Challenge Id 120 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (11) Framed-IP-Address = 10.10.10.6 (11) Framed-Route = "172.16.10.0/24 172.16.10.254" (11) Framed-IP-Netmask = 255.255.255.0 (11) EAP-Message = 0x010b002e190017030300239e5cd13943bc51823fdd3ad50610c08ffcf4ce231dbd6edc1d417a43078e4963389339 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0x1ee1c2c314eadbb67da4e0496fb672ca (11) Finished request Waking up in 4.7 seconds. (12) Received Access-Request Id 121 from 127.0.0.1:39643 to 127.0.0.1:1812 length 219 (12) User-Name = "test1.vpn" (12) NAS-Port-Type = Virtual (12) Service-Type = Framed-User (12) NAS-Port = 23 (12) NAS-Port-Id = "test1.vpn" (12) NAS-IP-Address = X.X.X.220 (12) Called-Station-Id = "X.X.X.220[4500]" (12) Calling-Station-Id = "X.X.X.211[4500]" (12) Acct-Session-Id = "1654243660-23" (12) EAP-Message = 0x020b002e19001703030023000000000000000416d278d66d7f8798a444c0449219eac44a56f078d7d9eaa2278d64 (12) NAS-Identifier = "strongSwan" (12) State = 0x1ee1c2c314eadbb67da4e0496fb672ca (12) Message-Authenticator = 0x397229ba90bc10f99d8795270a93e542 (12) Restoring &session-state (12) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (12) &session-state:TLS-Session-Version = "TLS 1.2" (12) &session-state:User-Name += "test1.vpn" (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) files: users: Matched entry test1.vpn at line 3 (12) [files] = ok (12) [preprocess] = ok (12) [mschap] = noop (12) eap: Peer sent EAP Response (code 2) ID 11 length 46 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/raddb/sites-enabled/default (12) authenticate { (12) eap: Expiring EAP session with state 0x1ee1c2c314eadbb6 (12) eap: Finished EAP session with state 0x1ee1c2c314eadbb6 (12) eap: Previous EAP request found for state 0x1ee1c2c314eadbb6, released from the list (12) eap: Peer sent packet with method EAP PEAP (25) (12) eap: Calling submodule eap_peap to process data (12) eap_peap: Continuing EAP-TLS (12) eap_peap: [eaptls verify] = ok (12) eap_peap: Done initial handshake (12) eap_peap: [eaptls process] = ok (12) eap_peap: Session established. Decoding tunneled attributes (12) eap_peap: PEAP state send tlv success (12) eap_peap: Received EAP-TLV response (12) eap_peap: Success (12) eap: Sending EAP Success (code 3) ID 11 length 4 (12) eap: Freeing handler (12) [eap] = ok (12) } # authenticate = ok (12) # Executing section post-auth from file /etc/raddb/sites-enabled/default (12) post-auth { (12) files: postauth_users: Matched entry test1.vpn at line 3 (12) [files] = ok (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) policy insert_acct_class { (12) update reply { (12) EXPAND ai:%{md5:%t,%I,%{Packet-Src-Port},%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}},%{NAS-IP-Address},%{Calling-Station-ID},%{User-Name}} (12) --> ai:e32f591f5372c47a6a9a75e86e6ff479 (12) &Class = 0x61693a6533326635393166353337326334376136613961373565383665366666343739 (12) } # update reply = noop (12) } # policy insert_acct_class = noop (12) } # post-auth = ok (12) Sent Access-Accept Id 121 from 127.0.0.1:1812 to 127.0.0.1:39643 length 0 (12) Framed-IP-Address = 10.10.10.6 (12) Framed-Route = "172.16.10.0/24 172.16.10.254" (12) Framed-IP-Netmask = 255.255.255.0 (12) MS-MPPE-Recv-Key = 0xd06fc9235d3e1bd45c16b64e88bae2f24f7827762e3039aa2c5ce5a0e71ab007 (12) MS-MPPE-Send-Key = 0xe228cae63f7c4328f95359e408fcd2cbebd6d7a7ec99129f458e08aca4e755dc (12) EAP-Message = 0x030b0004 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) User-Name = "test1.vpn" (12) Framed-IP-Address = 10.10.10.6 (12) Framed-Route = "172.16.10.0/24 172.16.10.254" (12) Framed-IP-Netmask = 255.255.255.0 (12) Class = 0x61693a6533326635393166353337326334376136613961373565383665366666343739 (12) Finished request Waking up in 4.7 seconds. (13) Received Accounting-Request Id 122 from 127.0.0.1:36435 to 127.0.0.1:1813 length 147 (13) Acct-Status-Type = Start (13) Acct-Session-Id = "1654243660-23" (13) NAS-Port-Type = Virtual (13) Service-Type = Framed-User (13) NAS-Port = 23 (13) NAS-Port-Id = "test1.vpn" (13) NAS-IP-Address = X.X.X.220 (13) Called-Station-Id = "X.X.X.220[4500]" (13) Calling-Station-Id = "X.X.X.211[4500]" (13) User-Name = "test1.vpn" (13) Framed-IP-Address = 10.10.10.6 (13) NAS-Identifier = "strongSwan" (13) # Executing section preacct from file /etc/raddb/sites-enabled/default (13) preacct { (13) [files] = noop (13) [preprocess] = ok (13) policy acct_unique { (13) update request { (13) &Tmp-String-9 := "ai:" (13) } # update request = noop (13) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (13) EXPAND %{hex:&Class} (13) --> (13) EXPAND ^%{hex:&Tmp-String-9} (13) --> ^61693a (13) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (13) else { (13) update request { (13) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (13) --> 4d5814ca5bc08a27b81676d0ab0f9f3e (13) &Acct-Unique-Session-Id := 4d5814ca5bc08a27b81676d0ab0f9f3e (13) } # update request = noop (13) } # else = noop (13) } # policy acct_unique = noop (13) } # preacct = ok (13) # Executing section accounting from file /etc/raddb/sites-enabled/default (13) accounting { (13) attr_filter.accounting_response: EXPAND %{User-Name} (13) attr_filter.accounting_response: --> test1.vpn (13) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (13) [attr_filter.accounting_response] = updated (13) } # accounting = updated (13) Sent Accounting-Response Id 122 from 127.0.0.1:1813 to 127.0.0.1:36435 length 0 (13) Finished request (13) Cleaning up request packet ID 122 with timestamp +147 At the twelve packet we can clearly see the framed IP route and even before. It is seen in the Access-Accept packet but not in the Accouting-Request. My guess is that i am missing an option in the sites-enabled/default. I remembered about my issue with the option use_tunneled_yes so I put the two update block at the post-auth part of the inner tunnel by following this doc : https://networkradius.com/doc/3.0.10/raddb/sites-available/inner-tunnel.html. It may be irrelevant to the issue. Thanks in advance for any tips or lead, Best regards.

2 1