Freeradius-Users

Download

freeradius-users@lists.freeradius.org

July 2022

29 participants
32 discussions

Pattern Match Group Membership in the attribute list
by Vlad Kratsberg 01 Jul '22

01 Jul '22

Hello, We are trying to configure LDAP group membership to work to avoid repeated calls to Active Directory. 90% of work is done: FR 3.0.25 ### Recording a list of groups: (6) ldap: Adding cacheable user object memberships (6) ldap: &control:LDAP-Cached-Membership += "network_engineering-inf-eng" (6) ldap: &control:LDAP-Cached-Membership += "ad_jira-developers" (6) ldap: &control:LDAP-Cached-Membership += "engineering" (6) ldap: &control:LDAP-Cached-Membership += "ad_jira-administrators" (6) ldap: &control:LDAP-Cached-Membership += "infrastructure-eng" (6) ldap: &control:LDAP-Cached-Membership += "ad_employees" (6) ldap: &control:LDAP-Cached-Membership += "no-phc-infra" (6) ldap: &control:LDAP-Cached-Membership += "networks-inf-eng" ### Caching it: (6) cache: Creating new cache entry (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'network_engineering-inf-eng' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'ad_jira-developers' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'engineering' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'ad_jira-administrators' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'infrastructure-eng' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'ad_employees' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'no-phc-infra' (6) cache: &LDAP-Cached-Membership += &control:LDAP-Cached-Membership[*] -> 'networks-inf-eng' (6) cache: EXPAND Cache last updated at %t (6) cache: --> Cache last updated at Thu Jun 30 18:55:55 2022 (6) cache: &reply:Reply-Message += Cache last updated at Thu Jun 30 18:55:55 2022 (6) cache: EXPAND %{randstr:ssssssssssssssssssssssssssssssss} (6) cache: --> Oae2Ugjv9rHP5rxlxNP64mal.P4ggAC4 (6) cache: &reply:Class := 0x4f61653255676a76397248503572786c784e5036346d616c2e50346767414334 (6) cache: Merging cache entry into request (6) cache: &request:LDAP-Cached-Membership += "network_engineering-inf-eng" (6) cache: &request:LDAP-Cached-Membership += "ad_jira-developers" (6) cache: &request:LDAP-Cached-Membership += "engineering" (6) cache: &request:LDAP-Cached-Membership += "ad_jira-administrators" (6) cache: &request:LDAP-Cached-Membership += "infrastructure-eng" (6) cache: &request:LDAP-Cached-Membership += "ad_employees" (6) cache: &request:LDAP-Cached-Membership += "no-phc-infra" (6) cache: &request:LDAP-Cached-Membership += "networks-inf-eng" (6) cache: &reply:Reply-Message += "Cache last updated at Thu Jun 30 18:55:55 2022" (6) cache: &reply:Class := 0x4f61653255676a76397248503572786c784e5036346d616c2e50346767414334 (6) cache: Committed entry, TTL 10 seconds #### Verifying that LDAP-Cached-Membership[*] contains all the groups: (8) EXPAND Attribute contains: %{LDAP-Cached-Membership[*]} (8) --> Attribute contains: network_engineering-inf-eng,ad_jira-developers,engineering,ad_jira-administrators,infrastructure-eng,ad_employees,no-phc-infra,networks-inf-eng (8) Reply-Message += Attribute contains: network_engineering-inf-eng,ad_jira-developers,engineering,ad_jira-administrators,infrastructure-eng,ad_employees,no-phc-infra,networks-inf-eng (8) } # update reply = noop ### In Post-Auth section, when evaluating policies, I can't match any of the values stored in the LDAP-Cached-Membership[*]. (8) cache: Found entry for "xxxxxxx" (8) [cache] = ok (8) if (notfound) { (8) if (notfound) -> FALSE (8) elsif (ok) { (8) elsif (ok) -> TRUE (8) elsif (ok) { (8) if (LDAP-Cached-Membership[*] =~ /.*networks-inf-eng.*/) { (8) if (LDAP-Cached-Membership[*] =~ /.*networks-inf-eng.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*corporate_it-inf-eng.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*corporate_it-inf-eng.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*security-eng.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*security-eng.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*workplace_services-peo.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*workplace_services-peo.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*infrastructure-eng./) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*infrastructure-eng./) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*engineering.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*engineering.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*finance.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*finance.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*people.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*people.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*ad_contractors.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*ad_contractors.*/) -> FALSE (8) elsif (LDAP-Cached-Membership[*] =~ /.*ad_employees.*/) { (8) elsif (LDAP-Cached-Membership[*] =~ /.*ad_employees.*/) -> FALSE (8) } # elsif (ok) = ok Appreciate your help in pointing me in the right direction. Thank you

2 3

No Connection Windows 8 and 10 in wpa2-enterprise
by Thiago Martins 01 Jul '22

01 Jul '22

Hi Guys! I have a freeradius with Google LDAP and it works fine on Windows 11 and Chromebooks, but clients in Windows 10 and Windows 8 can't login to the network. It just says "You can't connect to this network". I tried a lot of different stuff on the Windows side but it didn't work at all. I adjusted my tls_min_version to 1.0 and tls_max_version to 1.2 and commented disable_tlsv1_1 and disable_tlsv1 on my eap config file on my server, but with no effect. Did you have a similar problem before? This is a debug from a login attempt from a windows 8 user: FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/sqlcounter including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/dailycounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/monthlycounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/noresetcounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/expire_on_login.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/accessperiod.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/quotalimit.conf including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm company.com { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_sqlcounter # Loading module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter dailycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "daily" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" } # Loading module "monthlycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter monthlycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "monthly" counter_name = "Monthly-Session-Time" check_name = "Max-Monthly-Session" reply_name = "Session-Timeout" } # Loading module "noresetcounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter noresetcounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{User-Name}'" reset = "never" counter_name = "Max-All-Session-Time" check_name = "Max-All-Session" reply_name = "Session-Timeout" } # Loading module "expire_on_login" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter expire_on_login { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL( MAX(TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime))),0) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;" reset = "never" counter_name = "Expire-After-Initial-Login" check_name = "Expire-After" reply_name = "Session-Timeout" } # Loading module "accessperiod" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter accessperiod { sql_module_instance = "sql" key = "User-Name" query = "SELECT UNIX_TIMESTAMP() - UNIX_TIMESTAMP(AcctStartTime) FROM radacct WHERE UserName='%{User-Name}' ORDER BY AcctStartTime LIMIT 1" reset = "never" counter_name = "Max-Access-Period-Time" check_name = "Access-Period" reply_name = "Session-Timeout" } # Loading module "quotalimit" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter quotalimit { sql_module_instance = "sql" key = "User-Name" query = "SELECT (SUM(acctinputoctets) + SUM(acctoutputoctets)) FROM radacct WHERE UserName='%{User-Name}'" reset = "never" counter_name = "Max-Volume" check_name = "Max-Data" reply_name = "Mikrotik-Total-Limit" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" port = 636 identity = "PracticalG" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=company,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/3.0/certs/freeradius_2025_06_02.crt" private_key_file = "/etc/freeradius/3.0/certs/freeradius_2025_06_02.key" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 1656644400 [2022-07-01 00:00:00] # Instantiating module "monthlycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 1656644400 [2022-07-01 00:00:00] # Instantiating module "noresetcounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 0 [2022-07-01 09:00:00] # Instantiating module "expire_on_login" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 0 [2022-07-01 09:00:00] # Instantiating module "accessperiod" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 0 [2022-07-01 09:00:00] # Instantiating module "quotalimit" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1656679812 [2022-07-01 09:50:12], Prev reset 0 [2022-07-01 09:00:00] # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: tls_min_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20457 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.5.15 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 168.232.85.222 (MTR | TEXNET) to global clients list rlm_sql (168.232.85.222): Client "MTR | TEXNET" (sql) added rlm_sql (sql): Adding client 191.7.100.3 (RAM | GRV) to global clients list rlm_sql (191.7.100.3): Client "RAM | GRV" (sql) added rlm_sql (sql): Adding client 186.26.99.143 (RAM | AMPARO ONLINE) to global clients list rlm_sql (186.26.99.143): Client "RAM | AMPARO ONLINE" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10 # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:341 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 49405 Listening on proxy address :: port 53898 Ready to process requests (0) Received Access-Request Id 86 from 168.232.85.222:40820 to 10.158.0.4:1812 length 255 (0) User-Name = "gabrielmorais(a)company.com" (0) NAS-IP-Address = 172.11.11.11 (0) NAS-Identifier = "e66666666662" (0) Called-Station-Id = "E6-AA-AA-AA-AA-E2:company_corporativa" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "60-BB-BB-BB-BB-14" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "A9E98852467976C3" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x022d001f016761627269656c6d6f726169734069746175656972612e636f6d (0) Message-Authenticator = 0x3e0cbebb91ca478ad6568ddde0874813 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "company.com" for User-Name = "gabrielmorais(a)company.com" (0) suffix: Found realm "company.com" (0) suffix: Adding Stripped-User-Name = "gabrielmorais" (0) suffix: Adding Realm = "company.com" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: Peer sent EAP Response (code 2) ID 45 length 31 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 46 length 6 (0) eap: EAP session adding &reply:State = 0xee611a14ee4f0f5c (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 86 from 10.158.0.4:1812 to 168.232.85.222:40820 length 0 (0) EAP-Message = 0x012e00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xee611a14ee4f0f5c58acb681d72cb94b (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 87 from 168.232.85.222:40820 to 10.158.0.4:1812 length 351 (1) User-Name = "gabrielmorais(a)company.com" (1) NAS-IP-Address = 172.11.11.11 (1) NAS-Identifier = "e66666666662" (1) Called-Station-Id = "E6-AA-AA-AA-AA-E2:company_corporativa" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "60-BB-BB-BB-BB-14" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "A9E98852467976C3" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x022e006d158000000063160301005e0100005a030162beeda7b3f29c4487c8dba0a8e5226330f6c10b9de29c32b161c8dcfda90e71000018c014c0130035002fc00ac00900380032000a00130005000401000019ff01000100000a0006000400170018000b0002010000230000 (1) State = 0xee611a14ee4f0f5c58acb681d72cb94b (1) Message-Authenticator = 0x1d33947aa686dfec9524212b11bd233b (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "company.com" for User-Name = "gabrielmorais(a)company.com" (1) suffix: Found realm "company.com" (1) suffix: Adding Stripped-User-Name = "gabrielmorais" (1) suffix: Adding Realm = "company.com" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) eap: Peer sent EAP Response (code 2) ID 46 length 109 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xee611a14ee4f0f5c (1) eap: Finished EAP session with state 0xee611a14ee4f0f5c (1) eap: Previous EAP request found for state 0xee611a14ee4f0f5c, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 99 bytes (1) eap_ttls: Got complete TLS record (99 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv TLS 1.3 [length 005e] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0039], ServerHello (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0341], Certificate (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: TLS - In Handshake Phase (1) eap_ttls: TLS - got 1245 bytes of data (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 47 length 1004 (1) eap: EAP session adding &reply:State = 0xee611a14ef4e0f5c (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 87 from 10.158.0.4:1812 to 168.232.85.222:40820 length 0 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xee611a14ef4e0f5c58acb681d72cb94b (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 88 from 168.232.85.222:40820 to 10.158.0.4:1812 length 248 (2) User-Name = "gabrielmorais(a)company.com" (2) NAS-IP-Address = 172.11.11.11 (2) NAS-Identifier = "e66666666662" (2) Called-Station-Id = "E6-AA-AA-AA-AA-E2:company_corporativa" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "60-BB-BB-BB-BB-14" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "A9E98852467976C3" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x022f00061500 (2) State = 0xee611a14ef4e0f5c58acb681d72cb94b (2) Message-Authenticator = 0x8090e0537ea45065200b47550b645dcd (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "company.com" for User-Name = "gabrielmorais(a)company.com" (2) suffix: Found realm "company.com" (2) suffix: Adding Stripped-User-Name = "gabrielmorais" (2) suffix: Adding Realm = "company.com" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) eap: Peer sent EAP Response (code 2) ID 47 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xee611a14ef4e0f5c (2) eap: Finished EAP session with state 0xee611a14ef4e0f5c (2) eap: Previous EAP request found for state 0xee611a14ef4e0f5c, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 48 length 261 (2) eap: EAP session adding &reply:State = 0xee611a14ec510f5c (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 88 from 10.158.0.4:1812 to 168.232.85.222:40820 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xee611a14ec510f5c58acb681d72cb94b (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 89 from 168.232.85.222:40820 to 10.158.0.4:1812 length 386 (3) User-Name = "gabrielmorais(a)company.com" (3) NAS-IP-Address = 172.11.11.11 (3) NAS-Identifier = "e66666666662" (3) Called-Station-Id = "E6-AA-AA-AA-AA-E2:company_corporativa" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "60-BB-BB-BB-BB-14" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "A9E98852467976C3" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x023000901580000000861603010046100000424104ff892d50396709b9eee1c7c37163947ff4231b8aeb318f5e39e97788d90cbb99432fd74c56f64df99357f99fb2b7558c96bf9c7c1abe926c2ad99ed643c42f451403010001011603010030d4ec0178a5db9322674d1f975c8852b636768a805f44488ae0a92536b0e64882b44c17d80f90f6c986e890e537acbbc1 (3) State = 0xee611a14ec510f5c58acb681d72cb94b (3) Message-Authenticator = 0xdfacedbaef802a759a390ce10589610b (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "company.com" for User-Name = "gabrielmorais(a)company.com" (3) suffix: Found realm "company.com" (3) suffix: Adding Stripped-User-Name = "gabrielmorais" (3) suffix: Adding Realm = "company.com" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) eap: Peer sent EAP Response (code 2) ID 48 length 144 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xee611a14ec510f5c (3) eap: Finished EAP session with state 0xee611a14ec510f5c (3) eap: Previous EAP request found for state 0xee611a14ec510f5c, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer indicated complete TLS record size will be 134 bytes (3) eap_ttls: Got complete TLS record (134 bytes) (3) eap_ttls: [eaptls verify] = length included (3) eap_ttls: TLS_accept: SSLv3/TLS write server done (3) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (3) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (3) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (3) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished (3) eap_ttls: TLS_accept: SSLv3/TLS read finished (3) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (3) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (3) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished (3) eap_ttls: TLS_accept: SSLv3/TLS write finished (3) eap_ttls: (other): SSL negotiation finished successfully (3) eap_ttls: TLS - Connection Established (3) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (3) eap_ttls: TLS-Session-Version = "TLS 1.0" (3) eap_ttls: TLS - got 59 bytes of data (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 49 length 69 (3) eap: EAP session adding &reply:State = 0xee611a14ed500f5c (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (3) TLS-Session-Version = "TLS 1.0" (3) Sent Access-Challenge Id 89 from 10.000.0.4:1812 to 168.000.000.002:40820 length 0 (3) EAP-Message = 0x0131004515800000003b1403010001011603010030ccc9effc78ba3c36b383f16f4c0fc37819789c5a52e887b9a6e32a55a7fa093a56dfeea8423835a323dbe4f5fa501a2d (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xee611a14ed500f5c58acb681d72cb94b (3) Finished request Waking up in 4.7 seconds. (0) Cleaning up request packet ID 86 with timestamp +30 (1) Cleaning up request packet ID 87 with timestamp +30 (2) Cleaning up request packet ID 88 with timestamp +30 (3) Cleaning up request packet ID 89 with timestamp +30 Ready to process requests -- Thiago M -- www.itaueira.com <http://www.google.com/url?q=http%3A%2F%2Fwww.itaueira.com.br&sa=D&sntz=1&us…> facebook/melaoRei <https://www.google.com/url?q=https%3A%2F%2Fwww.facebook.com%2Fmelaorei%2F&s…> f/ItaueiraTurmadaMonica <https://www.google.com/url?q=https%3A%2F%2Fwww.facebook.com%2FItaueiraTurma…> f/ItaueiraMelon <https://www.google.com/url?q=https%3A%2F%2Fwww.facebook.com%2Fitaueiramelon…> Esta mensagem é endereçada exclusivamente ao seu destinatário e poderá conter informações confidenciais. O uso não autorizado de tais informações é proibido e estará sujeito às penalidades cabíveis. *This message is intended exclusively for its addressee and may contain information that is confidential. * *Unauthorized use of such information is prohibited and subject to applicable penalties.*

2 3