January 2023 - Freeradius-Users - lists.freeradius.org

(no subject)
by Anatoliy Kushner 12 Jan '23

12 Jan '23

Freeradius keep statistics (number of request/reply/acct and etc) for each NAS. But is it possible to separate stats for some subscribers from same NAS by assign them another client-ip-address ? I tried to update Client-IP-Address attribute, but this does not help.

1 0

FreeRadius Integration with Microsoft Active Directory
by Singh, Ramanpreet 09 Jan '23

09 Jan '23

Hi Marco, Thank you for your response. From your response I understand, even if my AD Domain is running on MS (Microsoft), I can join the RHEL to AD domain using 'winbind daemon', which I did. After joining the RHEL 8 Server to domain, 'winbind' is still not working, it's giving the below error. [root(a)localhost.domain.com]# wbinfo -a FreeRADIUSdev2 Enter FreeRADIUSdev2's password: plaintext password authentication failed Could not authenticate user FreeRADIUSdev2 with plaintext password Enter FreeRADIUSdev2's password: could not obtain winbind interface details: WBC_ERR_WINBIND_NOT_AVAILABLE could not obtain winbind separator! could not obtain winbind interface details: WBC_ERR_WINBIND_NOT_AVAILABLE could not obtain winbind netbios name! could not obtain winbind interface details: WBC_ERR_WINBIND_NOT_AVAILABLE could not obtain winbind domain name! Failed to get domain from winbindd Could not authenticate user FreeRADIUSdev2 with challenge/response Regards Raman Singh When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: FreeRadius Integration with Microsoft Active Directory (Marco Gaiarin) ---------------------------------------------------------------------- Message: 1 Date: Sun, 8 Jan 2023 18:09:08 +0100 From: Marco Gaiarin <gaio(a)lilliput.linux.it> To: "Singh, Ramanpreet via Freeradius-Users" <freeradius-users(a)lists.freeradius.org> Cc: freeradius-users(a)lists.freeradius.org Subject: Re: FreeRadius Integration with Microsoft Active Directory Message-ID: <iu9r8j-qi55.ln1(a)hermione.lilliput.linux.it> Mandi! Singh, Ramanpreet via Freeradius-Users In chel di` si favelave... > I read above links where it has been mentioned to used samba for AD integration, however this requires SAMBA AD-DC, which we don't have in our enviornment. No, you need an AD domain (samba or MS, it is the same) and a linux box with a winbind daemon running: both the domain member and domain controller configuration work, but it suffices you install winbind, configure samba (smb.conf) as domain member and join the domain. -- There are only 10 kinds of people in the world -- Those who understand binary, and those who don't. (Roberto Maglica) ------------------------------ Subject: Digest Footer - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------ End of Freeradius-Users Digest, Vol 213, Issue 5 ************************************************ ------------------------------------------------------------------------------ External Email: Please use caution when opening links and attachments / Courriel externe: Soyez prudent avec les liens et documents joints

2 1

RE: FreeRadius Integration with Microsoft Active Directory
by Singh, Ramanpreet 08 Jan '23

08 Jan '23

Hi Team, What's the ideal way for integration of FreeRadius with Microsoft Active Directory - Is it using Samba/Winbind or SSSD?? http://deployingradius.com/documents/configuration/active_directory.html https://networkradius.com/articles/2021/02/04/active-directory-with-FreeRAD… https://wiki.freeradius.org/guide/freeradius-active-directory-integration-h… I read above links where it has been mentioned to used samba for AD integration, however this requires SAMBA AD-DC, which we don't have in our enviornment. We only got Micrsoft AD Server. Can the integration be done between FreeRADIUS and Microsoft AD? Please advise [cid:image001.png@01D921DE.93CCF740] Regards Raman Singh RAN Solutions 5099 Creekbank Road, Mississauga, Ontario L4W 5N2 Raman.Singh(a)bell.ca<mailto:Raman.Singh@bell.ca> -----Original Message----- From: Alan DeKok <aland(a)deployingradius.com<mailto:aland@deployingradius.com>> Sent: Thursday, December 29, 2022 8:16 AM To: Singh, Ramanpreet <raman.singh(a)bell.ca<mailto:raman.singh@bell.ca>> Cc: freeradius-users-owner(a)lists.freeradius.org<mailto:freeradius-users-owner@lists.freeradius.org> Subject: [EXT]Re: Please add me to the mailing list You can subscribe yourself. See the web site. > On Dec 28, 2022, at 5:17 PM, Singh, Ramanpreet <raman.singh(a)bell.ca<mailto:raman.singh@bell.ca>> wrote: > > > Please add me to the mailing list > > Regards > Raman Singh > RAN Solutions > 5099 Creekbank Road, Mississauga, Ontario L4W 5N2 Raman.Singh(a)bell.ca<mailto:Raman.Singh@bell.ca> > > <image001.png> ------------------------------------------------------------------------------ External Email: Please use caution when opening links and attachments / Courriel externe: Soyez prudent avec les liens et documents joints

3 2

The service automatically stops and cannot be started
by Smiler 06 Jan '23

06 Jan '23

Good day  Freeraius service auto stops and cannot be started. the following is the log record, please help to check. #systemctl status freeradius.service freeradius.service - FreeRADIUS multi-protocol policy server   Loaded: loaded (/lib/systemd/system/freeradius.service; disabled; vendor preset: enabled)    Active: activating (start-pre) since Fri 2023-01-06 08:11:17 CST; 100ms ago      Docs: man:radiusd(8)            man:radiusd.conf(5)            http://wiki.freeradius.org/            http://networkradius.com/doc/  Main PID: 2519 (code=killed, signal=SEGV); Control PID: 1631 (freeradius)     Tasks: 1 (limit: 4915)    CGroup: /system.slice/freeradius.service            └─1631 /usr/sbin/freeradius -Cxm -lstdout # systemctl start freeradius.service Job for freeradius.service failed because the control process exited with error code. See "systemctl status freeradius.service" and "journalctl -xe" for details. # journalctl -xe-- Subject: Unit freeradius.service has failed -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has failed. -- -- The result is RESULT. freeradius.service: Service hold-off time over, scheduling restart. freeradius.service: Scheduled restart job, restart counter is at 1441. -- Subject: Automatic restarting of a unit has been scheduled-- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Automatic restarting of the unit freeradius.service has been scheduled, as the result for -- the configured Restart= setting for the unit. Stopped FreeRADIUS multi-protocol policy server.-- Subject: Unit freeradius.service has finished shutting down -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has finished shutting down. Starting FreeRADIUS multi-protocol policy server...-- Subject: Unit freeradius.service has begun start-up -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has begun starting up. : FreeRADIUS Version 3.0.16: Copyright (C) 1999-2017 The FreeRADIUS server project and contributors : There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A : PARTICULAR PURPOSE : You may redistribute copies of FreeRADIUS under the terms of the : GNU General Public License : For more information about these matters, see the file named COPYRIGHT : Starting - reading configuration files ... : Debugger not attached : Creating attribute Unix-Group : [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"         found in filter list for realm "DEFAULT". : [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"         found in filter list for realm "DEFAULT". : rlm_mschap (mschap): using internal authentication : rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output : rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked : /etc/freeradius/3.0/sites-enabled/inner-tunnel[250]: Failed to find "eap" as a module or policy. : /etc/freeradius/3.0/sites-enabled/inner-tunnel[250]: Please verify that the configuration exists in /etc/freeradius/3.0/mods-enabled/eap. : /etc/freeradius/3.0/sites-enabled/inner-tunnel[200]: Errors parsing authenticate section. : freeradius.service: Control process exited, code=exited status=1 : freeradius.service: Failed with result 'exit-code'. : Failed to start FreeRADIUS multi-protocol policy server.

2 1

Renaming of radusergroup table is not bound to the sql mod file definition
by Conrad Classen 04 Jan '23

04 Jan '23

Good day I need to rename the radusergroup and radreply tables in order to ensure that different radius servers using a common database do not hand out he incorrect Framed-Ip-Address attribute as well as the group used for each specific radius server. I have many thousands of SIM's being authenticated and need to ensure that there is a separation on the common database server. The radreply table rename works correctly in that the name defined for the table in the sql mod is what will be used. However, the table name I have defined in the sql mod file for the radusergroup table is not being used by queries, and it still continues to look for the original table name. I suspect that the table names are hard coded and the FreeRadius server is using that. I am using FreeRadius 3.2.1 radiusd -v radiusd: FreeRADIUS Version 3.2.1, for host x86_64-redhat-linux-gnu, built on Oct 3 2022 at 22:07:38 FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT The following from the radiusd -X debug output shows that the table name I have set is not being used. rlm_sql_postgresql: Status: PGRES_FATAL_ERROR rlm_sql_postgresql: 42P01: UNDEFINED TABLE (5) sql: rlm_sql_postgresql: ERROR: relation "radusergroup" does not exist (5) sql: rlm_sql_postgresql: LINE 1: SELECT GroupName FROM radusergroup WHERE Us... (5) sql: rlm_sql_postgresql: ^ (5) sql: rlm_sql_postgresql: QUERY: SELECT GroupName FROM radusergroup WHERE UserName = NEW.UserName (5) sql: rlm_sql_postgresql: CONTEXT: PL/pgSQL function upd_radgroups() line 7 at SQL statement (5) sql: SQL query returned: need alt query Thanks -- Conrad

2 1