February 2023 - Freeradius-Users - lists.freeradius.org

Authenticate to AD but only allow certain group
by Brian C. Huffman 16 Aug '25

16 Aug '25

All, I've got authentication working nicely with MSCHAP, but now I'd like to only allow users that are members of a certain AD group. I would prefer to have this happen only when requests come from a specific client (wireless access point). In this case the idea is to have users only be able to get wireless access when they're in a specific AD group. How can I do this in freeradius? Thanks, Brian

7 18

Monitor the number of open EAP sessions
by Sergey Marochkin 23 Nov '23

23 Nov '23

Hi everyone! I am facing a problem when freeradius reports that the limit of open sessions has been reached. These are log entries, like "Too many open sessions. Try increasing "max_sessions" in the EAP module configuration". During the debugging, it was determined that some ios devices (ipad/iphone), for a reason unknown to me, cyclically cannot complete eap/tls authentication process. I found that these devices successfully start communicating with the NAS (send EAP-Response/Identity). But after receiving the (TLS Start)-message, they no longer send the (TLS client_hello)-message, and restart the association process with the access point and therefore open a new EAP session. If recreate a wifi connection on such a device, it will connect successfully. Until I find the root cause of this behavior, I would like to monitor the number of open sessions of the radius server. But I couldn't find a suitable way to do it. Here is what I tried: - use the "status server" tool, but there is no suitable one among its counters - use tool "control-socket" and radmin but also i didn't find suitable counter Can you help me with this question? Thanks!

2 4

IKEv2 VPN clients and 2FA
by Markus Winkler 22 Mar '23

22 Mar '23

Hi all, I hope I may ask you regarding this topic. I have a test setup of OPNsense firewall, FreeRADIUS 3.2.0 and using Linux, Mac and especially Windows 10 (with the native Windows client) IKEv2 VPN clients. OPNsense / Phase 1 is configured to use EAP-RADIUS (i.e. FreeRADIUS) which is authenticating the VPN users against Active Directory. The VPN clients are using IKEv2 and EAP-MSCHAPv2 with (AD-) username and password. I use winbind for authentication (https://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind) and do an additional check if the user is member of a special AD group (via LDAP). These are the key points. And so far it's working fine. But: I have the demand to use 2FA (especially OTP) to increase the security of the VPN access. And that's my very question: I searched around, read tons of articles etc. if that's possible and if yes, what would be the best way to achive this goal. Among others I found this: https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy and would like to ask if someone has such an environment with Windows 10 clients and used it with e.g. privacyIDEA, OpenOTP or similar systems (other than the mentioned Gemalto Safenet Authentication Services)? It would be the best if the OTP system is running on-prem. Could this work and is it worth the effort to setup such a system? Any feedback is highly appreciated. Thank you and best regards, Markus

4 5

EAP-TLS default config
by clement.legoffic＠kelio.com 08 Mar '23

08 Mar '23

Hello, I started to learn network authentication and I want to setup a litle poc with Freeradius and EAP-TLS. I have previously tested my working configuration with the bob user as in the freeradius docker example. I use freeradius docker image https://hub.docker.com/r/freeradius/freeradius-server/ in a container. The configs files have been extracted to be configured in my host system and mounted at container's start. I have follow this tutorial for the radiusd.conf file : https://www.dslreports.com/forum/r9286052-FreeRADIUS-WinXP-Authentication-S… As I use the container's default keys, the user file is just a line : user(a)example.org Auth-Type := EAP, EAP-Type := EAP-TLS On my android phone, I connect to a dlink wifi access point (DWL-2100AP) configured for 802.1X. The ca.pem has been installed on my phone in order to use it for EAP-TLS when I select it. The username I use on the phone side is "user(a)example.org", the domain is "example.org". When I click on connect on my phone, I get an access reject as shown in the debug output below. I wanted to know if I am doing wrong somewhere and possibly where ? (Freeradius Version 3.2.0) (0) Received Access-Request Id 0 from 10.17.30.60:1061 to 172.17.0.2:1812 length 212 (0) Message-Authenticator = 0x46c9071611e746712984ef9165b516eb (0) Service-Type = Framed-User (0) User-Name = "user(a)example.org" (0) Framed-MTU = 1488 (0) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (0) Calling-Station-Id = "22-85-59-7C-27-7A" (0) NAS-Identifier = "D-Link Access Point" (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 54Mbps 802.11g" (0) EAP-Message = 0x020000150175736572406578616d706c652e6f7267 (0) NAS-IP-Address = 10.17.30.60 (0) NAS-Port = 1 (0) NAS-Port-Id = "STA port # 1" (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (0) suffix: No such realm "example.org" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: (TLS) Initiating new session (0) eap_tls: (TLS) Setting verify mode to require certificate from client (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0xbced3a8cbcec3700 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 0 from 172.17.0.2:1812 to 10.17.30.60:1061 length 64 (0) EAP-Message = 0x010100060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xbced3a8cbcec37005a032dcfba50bf3a (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 10.17.30.60:1061 to 172.17.0.2:1812 length 215 (1) Message-Authenticator = 0x2660937420c3367bd057db626b743cc5 (1) Service-Type = Framed-User (1) User-Name = "user(a)example.org" (1) Framed-MTU = 1488 (1) State = 0xbced3a8cbcec37005a032dcfba50bf3a (1) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (1) Calling-Station-Id = "22-85-59-7C-27-7A" (1) NAS-Identifier = "D-Link Access Point" (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 54Mbps 802.11g" (1) EAP-Message = 0x020100060300 (1) NAS-IP-Address = 10.17.30.60 (1) NAS-Port = 1 (1) NAS-Port-Id = "STA port # 1" (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (1) suffix: No such realm "example.org" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry user(a)example.org at line 2 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xbced3a8cbcec3700 (1) eap: Finished EAP session with state 0xbced3a8cbcec3700 (1) eap: Previous EAP request found for state 0xbced3a8cbcec3700, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Peer NAK'd indicating it is not willing to continue (1) eap: Sending EAP Failure (code 4) ID 1 length 4 (1) eap: Failed in EAP select (1) [eap] = invalid (1) } # authenticate = invalid (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> user(a)example.org (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 1 from 172.17.0.2:1812 to 10.17.30.60:1061 length 44 (1) EAP-Message = 0x04010004 (1) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (2) Received Access-Request Id 0 from 10.17.30.60:1063 to 172.17.0.2:1812 length 212 (2) Message-Authenticator = 0x10dad86d8ca96900ee9e41a3f3215e04 (2) Service-Type = Framed-User (2) User-Name = "user(a)example.org" (2) Framed-MTU = 1488 (2) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (2) Calling-Station-Id = "22-85-59-7C-27-7A" (2) NAS-Identifier = "D-Link Access Point" (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 54Mbps 802.11g" (2) EAP-Message = 0x020000150175736572406578616d706c652e6f7267 (2) NAS-IP-Address = 10.17.30.60 (2) NAS-Port = 1 (2) NAS-Port-Id = "STA port # 1" (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (2) suffix: No such realm "example.org" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 0 length 21 (2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Peer sent packet with method EAP Identity (1) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: (TLS) Initiating new session (2) eap_tls: (TLS) Setting verify mode to require certificate from client (2) eap: Sending EAP Request (code 1) ID 1 length 6 (2) eap: EAP session adding &reply:State = 0x61a7200961a62df0 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) Sent Access-Challenge Id 0 from 172.17.0.2:1812 to 10.17.30.60:1063 length 64 (2) EAP-Message = 0x010100060d20 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x61a7200961a62df0743c98b3a07aed8f (2) Finished request Waking up in 1.9 seconds. (3) Received Access-Request Id 1 from 10.17.30.60:1063 to 172.17.0.2:1812 length 215 (3) Message-Authenticator = 0x2946bae5a640bdd89ef938aa738b4b94 (3) Service-Type = Framed-User (3) User-Name = "user(a)example.org" (3) Framed-MTU = 1488 (3) State = 0x61a7200961a62df0743c98b3a07aed8f (3) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (3) Calling-Station-Id = "22-85-59-7C-27-7A" (3) NAS-Identifier = "D-Link Access Point" (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 54Mbps 802.11g" (3) EAP-Message = 0x020100060300 (3) NAS-IP-Address = 10.17.30.60 (3) NAS-Port = 1 (3) NAS-Port-Id = "STA port # 1" (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (3) suffix: No such realm "example.org" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 1 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry user(a)example.org at line 2 (3) [files] = ok (3) [expiration] = noop (3) [logintime] = noop Not doing PAP as Auth-Type is already set. (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x61a7200961a62df0 (3) eap: Finished EAP session with state 0x61a7200961a62df0 (3) eap: Previous EAP request found for state 0x61a7200961a62df0, released from the list (3) eap: Peer sent packet with method EAP NAK (3) (3) eap: Peer NAK'd indicating it is not willing to continue (3) eap: Sending EAP Failure (code 4) ID 1 length 4 (3) eap: Failed in EAP select (3) [eap] = invalid (3) } # authenticate = invalid (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> user(a)example.org (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 1 from 172.17.0.2:1812 to 10.17.30.60:1063 length 44 (3) EAP-Message = 0x04010004 (3) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.8 seconds. (0) Cleaning up request packet ID 0 with timestamp +74 due to cleanup_delay was reached (1) Cleaning up request packet ID 1 with timestamp +74 due to cleanup_delay was reached Waking up in 3.0 seconds. (4) Received Access-Request Id 0 from 10.17.30.60:1065 to 172.17.0.2:1812 length 212 (4) Message-Authenticator = 0x7e90cef35650d96b0188a6bcc9040100 (4) Service-Type = Framed-User (4) User-Name = "user(a)example.org" (4) Framed-MTU = 1488 (4) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (4) Calling-Station-Id = "22-85-59-7C-27-7A" (4) NAS-Identifier = "D-Link Access Point" (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 54Mbps 802.11g" (4) EAP-Message = 0x020000150175736572406578616d706c652e6f7267 (4) NAS-IP-Address = 10.17.30.60 (4) NAS-Port = 1 (4) NAS-Port-Id = "STA port # 1" (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (4) suffix: No such realm "example.org" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 21 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: (TLS) Initiating new session (4) eap_tls: (TLS) Setting verify mode to require certificate from client (4) eap: Sending EAP Request (code 1) ID 1 length 6 (4) eap: EAP session adding &reply:State = 0x10b8d47310b9d97a (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) Sent Access-Challenge Id 0 from 172.17.0.2:1812 to 10.17.30.60:1065 length 64 (4) EAP-Message = 0x010100060d20 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x10b8d47310b9d97a65ed29a95486330e (4) Finished request Waking up in 1.8 seconds. (5) Received Access-Request Id 1 from 10.17.30.60:1065 to 172.17.0.2:1812 length 215 (5) Message-Authenticator = 0x4024c8a365e14657a651ceb71b9f5f61 (5) Service-Type = Framed-User (5) User-Name = "user(a)example.org" (5) Framed-MTU = 1488 (5) State = 0x10b8d47310b9d97a65ed29a95486330e (5) Called-Station-Id = "00-26-5A-84-0D-89:dlink" (5) Calling-Station-Id = "22-85-59-7C-27-7A" (5) NAS-Identifier = "D-Link Access Point" (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 54Mbps 802.11g" (5) EAP-Message = 0x020100060300 (5) NAS-IP-Address = 10.17.30.60 (5) NAS-Port = 1 (5) NAS-Port-Id = "STA port # 1" (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (5) suffix: No such realm "example.org" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry user(a)example.org at line 2 (5) [files] = ok (5) [expiration] = noop (5) [logintime] = noop Not doing PAP as Auth-Type is already set. (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x10b8d47310b9d97a (5) eap: Finished EAP session with state 0x10b8d47310b9d97a (5) eap: Previous EAP request found for state 0x10b8d47310b9d97a, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Peer NAK'd indicating it is not willing to continue (5) eap: Sending EAP Failure (code 4) ID 1 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> user(a)example.org (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (5) Sending delayed response (5) Sent Access-Reject Id 1 from 172.17.0.2:1812 to 10.17.30.60:1065 length 44 (5) EAP-Message = 0x04010004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.8 seconds. (2) Cleaning up request packet ID 0 with timestamp +77 due to cleanup_delay was reached (3) Cleaning up request packet ID 1 with timestamp +77 due to cleanup_delay was reached Waking up in 3.1 seconds. (4) Cleaning up request packet ID 0 with timestamp +80 due to cleanup_delay was reached (5) Cleaning up request packet ID 1 with timestamp +80 due to cleanup_delay was reached Ready to process requests Thanks, Clément Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur par e-mail. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. Les communications sur Internet n'etant pas securisees, l'expediteur informe qu'il ne peut accepter aucune responsabilite quant au contenu de ce message. This mail message and attachments (the "message") are solely intended for the addresses. It is confidential in nature. If you receive this message in error, please delete it and immediately notify the sender by e-mail. Any use other than its intended purpose, dissemination or disclosure, either whole or partial, is prohibited except if formal approval is granted. As communication on the Internet is not secure, the sender does not accept responsibility for the content of this message.

2 6

How to check the Extended Key Usage in freeradius?
by Dentzer, Daniel 01 Mar '23

01 Mar '23

I'm configuring a freeradius server for authenticating Wifi clients with EAP-TLS. The solution should check certificates with EAP-TLS and everything is working fine, but checking the "extended key usage" to reply with a specific VLAN is not working as expected. So in my site config I have: if (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XY\.xxxxx\.de$/){ if(TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15380538.1") { update reply { &Tunnel-Type = 13, &Tunnel-Medium-Type = 6, &Tunnel-Private-Group-Id = "1" } } if(TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15210945.2") { update reply { &Tunnel-Type = 13, &Tunnel-Medium-Type = 6, &Tunnel-Private-Group-Id = "2" } } } elsif (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XYZ\.xxxxx\.de$/) { if(TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.16530950.3") { update reply { &Tunnel-Type = 13, &Tunnel-Medium-Type = 6, &Tunnel-Private-Group-Id = "3" } } } else { update reply { Reply-Message := "Certificate Extended-Key-Usage with wrong or missing Group." Auth-Type := Reject } reject } In the log I see that the Attribute is in the tls-cert: freeradius | (342) eap_tls: TLS-Client-Cert-Subject-Alt-Name-Dns := "user.XY.xxxxx.de" freeradius | (342) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication, 1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15210945.7" freeradius | (342) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" freeradius | (342) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15210945.2" But when I scroll down, I see that the result of the if-check is false: freeradius | (343) if (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XY\.xxxxx\.de$/){ freeradius | (343) if (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XY\.xxxxx\.de$/) -> TRUE freeradius | (343) if (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XY\.xxxxx\.de$/) { freeradius | (343) if (TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15380538.1") { freeradius | (343) if (TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15380538.1") -> FALSE freeradius | (343) if (TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15210945.2") { freeradius | (343) if (TLS-Client-Cert-X509v3-Extended-Key-Usage-OID == "1.3.6.1.4.1.311.21.8.16510850.12376249.15288979.13711710.10124257.18.15210945.2") -> FALSE ### This should be TRUE ### freeradius | (343) } # if (TLS-Client-Cert-Issuer == "/DC=de/DC=xxxxx/CN=XXX Sub CA" && TLS-Client-Cert-Subject-Alt-Name-Dns =~ /\.XY\.xxxxx\.de$/) = noop TLS-Client-Cert-X509v3-Extended-Key-Usage-OID is a list, do I have to check it in a different way? Thanks in advance. Daniel

2 4

pam_radius with only otp
by Joe Jones 27 Feb '23

27 Feb '23

Hi all, Is it possible to use the pam_radius .so module with only a otp? It works fine with a password+otp but I cannot get it working with only otp. Thanks

2 1

Dictionary question
by Igor Smitran 27 Feb '23

27 Feb '23

Hi list, Is it possible to have a dictionary describing Cisco-AVPair in more detail. If i have something like this: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Is it possible to make it look like this: Cisco-AVP-qos-policy-in += 1.5Mbps And when radius sends response to NAS it will be converted to: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Thank you

3 3

Dictionary question
by Igor Smitran 26 Feb '23

26 Feb '23

Hi list, Is it possible to have a dictionary describing Cisco-AVPair in more detail. If i have something like this: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Is it possible to make it look like this: Cisco-AVP-qos-policy-in += 1.5Mbps And when radius sends response to NAS it will be converted to: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Thank you

1 0

Compiling freeradius v3.0.x with kqueue support on ubuntu 22.04
by Prajwal Basnet 26 Feb '23

26 Feb '23

Hi all, I am trying to compile freeradius v3.0.x with kqueue support on ubuntu 22.04. I know that kqueue is not present in linux & is a feature for BSDs/OSX. So, I'm trying to use libkqueue library for compatibility (github.com/mheily/libkqueue) But every time I try to compile, during the configuration phase when I run "./configure", it checks for kqueue & it isn't found. #9 12.23 checking for kqueue... no #9 7.796 checking sys/event.h usability... no #9 7.821 checking sys/event.h presence... no #9 7.833 checking for sys/event.h... no Sincerely, Prajwal

3 3

Google LDAP auth
by Davide G. M. Salvetti 25 Feb '23

25 Feb '23

Hi, I'm trying to understand how to authenticate users with Google Secure LDAP service. I'm not sure I understood how to do it. I perused and configured mods-available/ldap_google, tried to adapt sites-available/default as per instructions there, enabled mods cache_auth, ldap_google, enabled sites default and google-ldap-auth, disabled site inner-tunnel. Since sites-available/google-ldap-auth is declared designed to be used an inner virtual server, I renamed the virtual server as "inner-tunnel". I'm not sure: did I understand it right? What's the proper way to enable google-ldap-auth? Am I supposed to set virtual-server in mod eap instead? Local radtests of the inner-tunnel seems to be successful (see log request (1)), but WiFi Enterprise EAP tests are not. I tried different protocols with a Windows laptop and an Android phone; please see the enclosed freeradius -X log, where I deleted with [...] some AP Access-Request with Service-Type = Call-Check which I think aren't relevant and anonymized test.user and my.domain. I tried to read the log, but I'm not so fluent with FreeRADIUS; could you please point me my mistakes? -- Thanks, Davide

3 2

Anyone have an example Cisco TACACS Acct PCAP?
by Arran Cudbard-Bell 24 Feb '23

24 Feb '23

We (The FreeRADIUS development team) are fixing up the TACACS frontend and process modules in v4.0.x. The example packets we're working with for TACACS accounting have timestamps in the format "2023-02-22 18:37:36 EST". RFC 8907 states timestamps should be seconds since the unix epoch. We're wondering how many TACACS clients out there actually follow the RFC and how many use their own weird and wonderful formats. We'd appreciate any PCAPs (or screen grabs of PCAPs) which show the format their TACACS clients uses for dates. Thanks, -Arran

4 4

Connect Users registered on a ldaps (azure ad ds with hashed passwords ) via a local freeradius server
by Chris Nzengue - dejamobile externe 24 Feb '23

24 Feb '23

For the begining i want say that . I am reposting another question because my last post wasn't exacty clear. I realized that, my issue was diffrent than the issue i expalined. Because my real issue is very different i prefered create another post. What i am trying to do? I want connect on the local wifi network , users registry on ldaps(azure ad ds) . The freeradius is on a local server and the azure ad ds is on the cloud. The azure ad ds is not like an classic ldap. An admin User can't read the passord on the azure ad ds (laps). This is the problem beacause, i think ldap authentification works like that. The user enter id and password then the admin user registryed on the ldap check if the password is right or wrong. On azure ad ds (ldaps) the passwords are not saved on an clear text format. The passwords are hashed (or encrypted) . i saw an interresing thing about use samba or use a hash function . First samba can be only used with an local active directory and for the second solution i don't know how to use an hash function. I also saw a thing like FreeRADIUS can use LDAP as an authentication oracle, meaning FreeRADIUS passes authentication credentials to LDAP, and LDAP returns a pass/fail response. FreeRADIUS can then generate an Access-Accept or Access-Reject packet based on that. But i also don't know how to do that. why i am trying to do it: I want do it because i want secure the wifi network and not use a single keyword. i don't want also oblige users to know a new password and id . I want they use the same password and id. What i expect the server to do? i expect the server check on the ldaps if the id and the password received by the acces point are right. If the id and the password are right then the user join the network. But the problem is the passwords are hashed and i think freeradius can read it. What the server does instead (i know my setting is wrong but the posting process oblige me to post my log ) ? FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client AP_cisco1 { ipaddr = 192.168.200.20 require_message_authenticator = no secret = <<< secret >>> virtual_server = "inner-tunnel" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = PAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://aadds.*******.com" port = 636 identity = "cn=Radius,ou=AADDC Users, dc=*********,dc=com" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=AADDC Users,dc=********,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { tls_min_version = "1.2" start_tls = no require_cert = "never" } } Creating attribute LDAP-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/etc/freeadius/3.0/mods-available/ntlm_auth --request-nt-key --domain=********.com --username=Radius --password=R7)LhEf3Y}Uv)l" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20513 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "pap" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:342 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 60552 Listening on proxy address :: port 35305 Ready to process requests (0) Received Access-Request Id 153 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (0) User-Name = "chris.********" (0) Chargeable-User-Identity = 0x14 (0) Location-Capable = Civic-Location (0) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (0) Called-Station-Id = "00-fc-ba-e1-98-e0:radius_test" (0) NAS-Port = 1 (0) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (0) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (0) NAS-IP-Address = 192.168.200.20 (0) NAS-Identifier = "********" (0) Airespace-Wlan-Id = 6 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x020100120163687269732e6e7a656e677565 (0) Message-Authenticator = 0x974324719f4ff1b1116600ab28a17e4b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (0) (0) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) files: Waiting for search result... (0) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) files: Checking user object's memberOf attributes (0) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (0) files: Waiting for search result... (0) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Closing expired connection (4) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (3) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (2) - Hit idle_timeout limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (1) - Hit idle_timeout limit (0) files: users: Matched entry DEFAULT at line 72 (0) [files] = ok rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) ldap: Processing user attributes (0) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (0) [ldap] = updated (0) if ((ok || updated) && User-Password && !control:Auth-Type) { (0) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> chris.******** (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) update outer.session-state { (0) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (0) } # update outer.session-state = invalid (0) } # Post-Auth-Type REJECT = invalid (0) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 153 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 153 with timestamp +75 due to cleanup_delay was reached Ready to process requests (1) Received Access-Request Id 154 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (1) User-Name = "chris.********" (1) Chargeable-User-Identity = 0x14 (1) Location-Capable = Civic-Location (1) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (1) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (1) NAS-Port = 1 (1) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (1) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (1) NAS-IP-Address = 192.168.200.20 (1) NAS-Identifier = "********" (1) Airespace-Wlan-Id = 6 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100120163687269732e6e7a656e677565 (1) Message-Authenticator = 0xa0ca0c245aef7cfc9b3da3a37d812c5f (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) update control { (1) &Proxy-To-Realm := LOCAL (1) } # update control = noop (1) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (1) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) files: Waiting for search result... (1) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) files: Checking user object's memberOf attributes (1) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (1) files: Waiting for search result... (1) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need 1 more connections to reach min connections (3) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) files: users: Matched entry DEFAULT at line 72 (1) [files] = ok rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) ldap: Processing user attributes (1) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (1) [ldap] = updated (1) if ((ok || updated) && User-Password && !control:Auth-Type) { (1) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> chris.******** (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) update outer.session-state { (1) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (1) } # update outer.session-state = invalid (1) } # Post-Auth-Type REJECT = invalid (1) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 154 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (1) Cleaning up request packet ID 154 with timestamp +95 due to cleanup_delay was reached Ready to process requests (2) Received Access-Request Id 155 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (2) User-Name = "chris.********" (2) Chargeable-User-Identity = 0x14 (2) Location-Capable = Civic-Location (2) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (2) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (2) NAS-Port = 1 (2) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (2) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (2) NAS-IP-Address = 192.168.200.20 (2) NAS-Identifier = "********" (2) Airespace-Wlan-Id = 6 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020100120163687269732e6e7a656e677565 (2) Message-Authenticator = 0x1ed012aae54a89fb6558ea0019fafe02 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) update control { (2) &Proxy-To-Realm := LOCAL (2) } # update control = noop (2) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (2) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) files: Waiting for search result... (2) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) files: Checking user object's memberOf attributes (2) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (2) files: Waiting for search result... (2) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (7), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) files: users: Matched entry DEFAULT at line 72 (2) [files] = ok rlm_ldap (ldap): Reserved connection (6) (2) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) ldap: Processing user attributes (2) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (6) (2) [ldap] = updated (2) if ((ok || updated) && User-Password && !control:Auth-Type) { (2) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> chris.******** (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) update outer.session-state { (2) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (2) } # update outer.session-state = invalid (2) } # Post-Auth-Type REJECT = invalid (2) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 155 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (2) Cleaning up request packet ID 155 with timestamp +101 due to cleanup_delay was reached Ready to process requests <https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/> <https://dejamobile.com/>[cid:logo-500x500_504d48b6-dc99-43ec-874c-af726c18f56e.png] Chris Nzengue Stagiaire DEVOPS DEVOPS internship <https://www.linkedin.com/company/dejamobile> [cid:SocialLink_Linkedin_32x32_b9896d3d-92f0-40ba-b3a3-c8ead42de0f5.png] <https://www.linkedin.com/company/dejamobile> <https://www.linkedin.com/company/dejamobile> <https://www.twitter.com/dejamobile> [cid:SocialLink_Twitter_32x32_d8c0f93a-95bb-4ab2-8384-cc2e43456b2f.png] <https://twitter.com/dejamobile> Fixe / Office: +33(2)14747500 chris.nzengue(a)dejamobile.com<mailto:%7BE-mail%7D> <https://www.linkedin.com/company/dejamobile><http://www.linkedin.com/company/dejamobile><https://www.linkedin.com/company/dejamobile><https://dejamobile.com/dejamobile-at-mpe-2022/><https://www.linkedin.com/company/dejamobile/>[cid:mpe23mail_c31705da-edc4-4d9a-aa24-bb15583ff32a.png]<https://www.merchantpaymentsecosystem.com/>

4 3

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 23 Feb '23

23 Feb '23

Thanks for the response. It resolved my issue. I was however getting an authentication not found error which I fixed by making a slight adjustment because we don't check password for mobile: -ldap-mobile if (notfound) { reject } else { accept } On Thu, 23 Feb 2023 at 14:00, <freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 22 Feb 2023 20:47:42 +0200 > From: Steven Walters <steven.walters1(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: > <CALF=EMJUde0_Y=XEOENp5Ro3a3PJFnF5fYCx-= > UOdSOb5aGKzA(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi > > I agree, we should have updated our freeradius a long time ago, but we will > do better going forward. > > Just to explain what we are training to achieve. > > Our fixed line customers authenticate with username and password. Our fixed > line customers can have a mobile VAS linked to fixed line. Customer can > have single SIM or multiple SIM linked to fixed line username on LDAP. > > In the case of mobile service, we receive the MSISDN in the radius access > request. We then lookup the username which has the MSISDN linked on LDAP. > If subscriber name has this MSISDN linked, the radius will respond with the > username in the access-accept. If no match is found it will respond with > access-reject. > > When the radius receives the accounting start for this session it will have > the username of the fixed line service returned in the access-accept and > not the MSISDN which was original in the access request. > > So basically, in the case of the mobile VAS, the authentication finds the > username on LDAP which has the MSISDN linked as a VAS and if no username > has the MSISDN (for example customer cancelled the VAS but is still trying > to use the SIM) it will send an access reject. No password checks are done > for mobile service. > > This mobile VAS was implemented before I joined so there might be better > alternative to provide the same result. > > Kind regards > Steven > > > On Wed, 22 Feb 2023 at 14:00, < > freeradius-users-request(a)lists.freeradius.org> > wrote: > > > Send Freeradius-Users mailing list submissions to > > freeradius-users(a)lists.freeradius.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://lists.freeradius.org/mailman/listinfo/freeradius-users > > or, via email, send a message with subject or body 'help' to > > freeradius-users-request(a)lists.freeradius.org > > > > You can reach the person managing the list at > > freeradius-users-owner(a)lists.freeradius.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Freeradius-Users digest..." > > > > > > Today's Topics: > > > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > > 3. Some new documentation for "how to make FreeRADIUS do what I > > want" (Alan DeKok) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 21 Feb 2023 23:47:05 +0200 > > From: Steven Walters <steven.walters1(a)gmail.com> > > To: freeradius-users(a)lists.freeradius.org > > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > > Message-ID: > > <CALF=EMKe4Ky91x7A2GgAKaQkVv0D+qxjWqFkaTOgzq= > > BvBFA2w(a)mail.gmail.com> > > Content-Type: text/plain; charset="UTF-8" > > > > Hi > > > > I am in the process of upgrading our radius servers but have one issue > > outstanding. > > > > Basically we receive in the radius request from mobile a MSISDN. We then > go > > do a lookup to find the username on LDAP matching the MSISDN. > > > > In the old version everything works fine but after upgrading the radius > > responds with access rejection even though MSISDN finds a username on > LDAP. > > > > Below are extracts from the mobile virtual server file and ldap file. > > > > mobile virtual server: > > > > # The ldap module reads passwords from the LDAP database. > > -ldap-mobile > > if (!ok) { > > reject > > > > ldap: > > > > user { > > # Where to start searching in the tree for users > > base_dn = "${..base_dn}" > > > > # Filter for user objects, should be specific enough > > # to identify a single user object. > > #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" > > #filter = > > "(mobileradiusCallingStationId=%{Calling-Station-Id})" > > filter = > > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > > > > Below is debug from version 3.0.1 > > > > rlm_ldap (ldap-mobile): Reserved connection (11) > > (9) ldap-mobile : expand: > > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > -> > > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > > (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' > > (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter > > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > > (9) ldap-mobile : Waiting for search result... > > (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net > > ,cn=radius,ou=isp" > > (9) ldap-mobile : Processing user attributes > > (9) ldap-mobile : reply:User-Name := ' > > onyebilanma(a)telkomsa.net > > ' > > (9) ldap-mobile : control:User-Name := ' > > onyebilanma(a)telkomsa.net' > > rlm_ldap (ldap-mobile): Released connection (11) > > rlm_ldap (ldap-mobile): Opening additional connection (12) > > rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 > > TLSMC: MozNSS compatibility interception begins. > > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration > is > > present. > > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > > initialization. Continuing with OpenSSL only. > > TLSMC: MozNSS compatibility interception ends. > > rlm_ldap (ldap-mobile): Waiting for bind result... > > rlm_ldap (ldap-mobile): Bind successful > > (9) [-ldap-mobile] = ok > > (9) ? if (!ok) > > (9) ? if (!ok) -> FALSE > > (9) } # authorize = ok > > (9) Found Auth-Type = Accept > > (9) Auth-Type = Accept, accepting the user > > (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli > > 27671946862) > > (9) # Executing section post-auth from file > /etc/raddb/sites-enabled/mobile > > (9) post-auth { > > (9) [exec] = noop > > (9) remove_reply_message_if_eap remove_reply_message_if_eap { > > (9) ? if (reply:EAP-Message && reply:Reply-Message) > > (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE > > (9) else else { > > (9) [noop] = noop > > (9) } # else else = noop > > (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop > > (9) update reply { > > (9) Acct-Interim-Interval = 14400 > > (9) } # update reply = noop > > (9) } # post-auth = noop > > Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to > > 105.187.248.220 port 4017 > > User-Name = 'onyebilanma(a)telkomsa.net' > > Acct-Interim-Interval = 14400 > > > > Below is debug from version 3.2.2 > > > > rlm_ldap (ldap-mobile): Reserved connection (2) > > (5) ldap-mobile: EXPAND > > (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) > > (5) ldap-mobile: --> > > (&(mobileradiusCallingStationId=27659066168)(status=10100)) > > (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter > > "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope > "sub" > > (5) ldap-mobile: Waiting for search result... > > (5) ldap-mobile: User object found at DN "uid= > ahmed.elhefnawy(a)telkomsa.net > > ,cn=radius,ou=isp" > > (5) ldap-mobile: Processing user attributes > > (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > > (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > > rlm_ldap (ldap-mobile): Released connection (2) > > Need 4 more connections to reach min connections (8) > > Need more connections to reach 16 spares > > rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 > pending > > slots used > > rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 > > rlm_ldap (ldap-mobile): Waiting for bind result... > > rlm_ldap (ldap-mobile): Bind successful > > (5) [ldap-mobile] = updated > > (5) if (!ok) { > > (5) if (!ok) -> TRUE > > (5) if (!ok) { > > (5) [reject] = reject > > (5) } # if (!ok) = reject > > (5) } # authorize = reject > > (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli > > 27659066168) > > (5) Using Post-Auth-Type Reject > > (5) # Executing group from file /etc/raddb/sites-enabled/mobile > > (5) Post-Auth-Type REJECT { > > (5) policy remove_reply_message_if_eap { > > (5) if (&reply:EAP-Message && &reply:Reply-Message) { > > (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > > (5) else { > > (5) [noop] = noop > > (5) } # else = noop > > (5) } # policy remove_reply_message_if_eap = noop > > (5) } # Post-Auth-Type REJECT = noop > > (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 > cli > > 27659066168) > > (5) Delaying response for 2.000000 seconds > > > > Any advice would be appreciated? > > > > Regards > > Steven > > > > > > ------------------------------ > > > > Message: 2 > > Date: Tue, 21 Feb 2023 17:47:47 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > > Message-ID: <407E5AF6-AD76-468D-97CD-1D5858D63AC1(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > On Feb 21, 2023, at 4:47 PM, Steven Walters <steven.walters1(a)gmail.com> > > wrote: > > > Below is debug from version 3.0.1 > > > > To be honest... 3.0.1 is about ten years old. We're not going to worry > > a lot about compatibility with every little piece of it. > > > > Plus, there have been many bug fixes since then, including security > > fixes. If you don't like people attacking your RADIUS server, it should > > have been updated regularly. > > > ... > > > Below is debug from version 3.2.2 > > > ... > > > (5) [ldap-mobile] = updated > > > (5) if (!ok) { > > > > Change that to: > > > > if (!ok || !updated) { > > ... > > > > and it will work. > > > > > Any advice would be appreciated? > > > > Upgrade regularly. > > > > Plus, it helps to explain *why* you have this configuration. You > > generally don't have to explicitly reject users who don't have passwords. > > The server will do this automatically. > > > > So you don't need a "if not found in LDAP, reject" configuration. Just > > check LDAP. If the user isn't found, they won't have a password read > from > > LDAP. And the server won't be able to authenticate them. > > > > Alan DeKok. > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Tue, 21 Feb 2023 17:58:56 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Some new documentation for "how to make FreeRADIUS do what I > > want" > > Message-ID: <98543E7C-E533-4DBC-9D27-09E9E9261717(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > We've been busy working on v4, including making sure that every aspect > > of the server is extensively documented. > > > > > > I've just written a document on "policies". But it's really "how do I > > get this software to do what I want, without going crazy". > > > > > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > It gives a detailed guide to the methods used to create FreeRADIUS > > configurations. > > > > There's also a document on why FreeRADIUS is so complex to configure: > > > > > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > This should help to explain why we can't just have a shiny button which > > says "do what I want". The configuration is much, much, more complex > than > > that. > > > > v4 also has complete documentation for each unlang keyword: > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > This documentation applies to v4, but it's _mostly_ compatible with v3. > > Where there are changes from v3, the documentation explains it. > > > > Hopefully this helps. We're not just wishing that v4 comes out one > > day. We're actively working on it. > > > > Alan DeKok. > > > > > > > > ------------------------------ > > > > Subject: Digest Footer > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > > ------------------------------ > > > > End of Freeradius-Users Digest, Vol 214, Issue 21 > > ************************************************* > > > > > -- > Warm Regards > > Steven Walters > 0814287179 > > > ------------------------------ > > Message: 2 > Date: Wed, 22 Feb 2023 14:11:54 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: <AB4430D0-F05B-4484-B471-C38C4F07572B(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Feb 22, 2023, at 1:47 PM, Steven Walters <steven.walters1(a)gmail.com> > wrote: > > Our fixed line customers authenticate with username and password. Our > fixed > > line customers can have a mobile VAS linked to fixed line. Customer can > > have single SIM or multiple SIM linked to fixed line username on LDAP. > > > > In the case of mobile service, we receive the MSISDN in the radius access > > request. We then lookup the username which has the MSISDN linked on LDAP. > > If subscriber name has this MSISDN linked, the radius will respond with > the > > username in the access-accept. If no match is found it will respond with > > access-reject. > > OK. So "if not found in LDAP, reject". Luckily, the ldap module will > return "notfound", which is a bit better indication than "!ok" or > "!updated". > > ldap > if (notfound) { > reject > } > > > > When the radius receives the accounting start for this session it will > have > > the username of the fixed line service returned in the access-accept and > > not the MSISDN which was original in the access request. > > That makes sense. > > > So basically, in the case of the mobile VAS, the authentication finds the > > username on LDAP which has the MSISDN linked as a VAS and if no username > > has the MSISDN (for example customer cancelled the VAS but is still > trying > > to use the SIM) it will send an access reject. No password checks are > done > > for mobile service. > > > > This mobile VAS was implemented before I joined so there might be better > > alternative to provide the same result. > > The "notfound' return code is the best indication of "not found" . > > Alan DeKok. > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > End of Freeradius-Users Digest, Vol 214, Issue 22 > ************************************************* > -- Warm Regards Steven Walters 0814287179

1 0

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 22 Feb '23

22 Feb '23

Hi I agree, we should have updated our freeradius a long time ago, but we will do better going forward. Just to explain what we are training to achieve. Our fixed line customers authenticate with username and password. Our fixed line customers can have a mobile VAS linked to fixed line. Customer can have single SIM or multiple SIM linked to fixed line username on LDAP. In the case of mobile service, we receive the MSISDN in the radius access request. We then lookup the username which has the MSISDN linked on LDAP. If subscriber name has this MSISDN linked, the radius will respond with the username in the access-accept. If no match is found it will respond with access-reject. When the radius receives the accounting start for this session it will have the username of the fixed line service returned in the access-accept and not the MSISDN which was original in the access request. So basically, in the case of the mobile VAS, the authentication finds the username on LDAP which has the MSISDN linked as a VAS and if no username has the MSISDN (for example customer cancelled the VAS but is still trying to use the SIM) it will send an access reject. No password checks are done for mobile service. This mobile VAS was implemented before I joined so there might be better alternative to provide the same result. Kind regards Steven On Wed, 22 Feb 2023 at 14:00, <freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > 3. Some new documentation for "how to make FreeRADIUS do what I > want" (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 21 Feb 2023 23:47:05 +0200 > From: Steven Walters <steven.walters1(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: > <CALF=EMKe4Ky91x7A2GgAKaQkVv0D+qxjWqFkaTOgzq= > BvBFA2w(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi > > I am in the process of upgrading our radius servers but have one issue > outstanding. > > Basically we receive in the radius request from mobile a MSISDN. We then go > do a lookup to find the username on LDAP matching the MSISDN. > > In the old version everything works fine but after upgrading the radius > responds with access rejection even though MSISDN finds a username on LDAP. > > Below are extracts from the mobile virtual server file and ldap file. > > mobile virtual server: > > # The ldap module reads passwords from the LDAP database. > -ldap-mobile > if (!ok) { > reject > > ldap: > > user { > # Where to start searching in the tree for users > base_dn = "${..base_dn}" > > # Filter for user objects, should be specific enough > # to identify a single user object. > #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" > #filter = > "(mobileradiusCallingStationId=%{Calling-Station-Id})" > filter = > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > > Below is debug from version 3.0.1 > > rlm_ldap (ldap-mobile): Reserved connection (11) > (9) ldap-mobile : expand: > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" -> > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' > (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > (9) ldap-mobile : Waiting for search result... > (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net > ,cn=radius,ou=isp" > (9) ldap-mobile : Processing user attributes > (9) ldap-mobile : reply:User-Name := ' > onyebilanma(a)telkomsa.net > ' > (9) ldap-mobile : control:User-Name := ' > onyebilanma(a)telkomsa.net' > rlm_ldap (ldap-mobile): Released connection (11) > rlm_ldap (ldap-mobile): Opening additional connection (12) > rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 > TLSMC: MozNSS compatibility interception begins. > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is > present. > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > initialization. Continuing with OpenSSL only. > TLSMC: MozNSS compatibility interception ends. > rlm_ldap (ldap-mobile): Waiting for bind result... > rlm_ldap (ldap-mobile): Bind successful > (9) [-ldap-mobile] = ok > (9) ? if (!ok) > (9) ? if (!ok) -> FALSE > (9) } # authorize = ok > (9) Found Auth-Type = Accept > (9) Auth-Type = Accept, accepting the user > (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli > 27671946862) > (9) # Executing section post-auth from file /etc/raddb/sites-enabled/mobile > (9) post-auth { > (9) [exec] = noop > (9) remove_reply_message_if_eap remove_reply_message_if_eap { > (9) ? if (reply:EAP-Message && reply:Reply-Message) > (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE > (9) else else { > (9) [noop] = noop > (9) } # else else = noop > (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop > (9) update reply { > (9) Acct-Interim-Interval = 14400 > (9) } # update reply = noop > (9) } # post-auth = noop > Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to > 105.187.248.220 port 4017 > User-Name = 'onyebilanma(a)telkomsa.net' > Acct-Interim-Interval = 14400 > > Below is debug from version 3.2.2 > > rlm_ldap (ldap-mobile): Reserved connection (2) > (5) ldap-mobile: EXPAND > (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) > (5) ldap-mobile: --> > (&(mobileradiusCallingStationId=27659066168)(status=10100)) > (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter > "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope "sub" > (5) ldap-mobile: Waiting for search result... > (5) ldap-mobile: User object found at DN "uid=ahmed.elhefnawy(a)telkomsa.net > ,cn=radius,ou=isp" > (5) ldap-mobile: Processing user attributes > (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > rlm_ldap (ldap-mobile): Released connection (2) > Need 4 more connections to reach min connections (8) > Need more connections to reach 16 spares > rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 pending > slots used > rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 > rlm_ldap (ldap-mobile): Waiting for bind result... > rlm_ldap (ldap-mobile): Bind successful > (5) [ldap-mobile] = updated > (5) if (!ok) { > (5) if (!ok) -> TRUE > (5) if (!ok) { > (5) [reject] = reject > (5) } # if (!ok) = reject > (5) } # authorize = reject > (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli > 27659066168) > (5) Using Post-Auth-Type Reject > (5) # Executing group from file /etc/raddb/sites-enabled/mobile > (5) Post-Auth-Type REJECT { > (5) policy remove_reply_message_if_eap { > (5) if (&reply:EAP-Message && &reply:Reply-Message) { > (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (5) else { > (5) [noop] = noop > (5) } # else = noop > (5) } # policy remove_reply_message_if_eap = noop > (5) } # Post-Auth-Type REJECT = noop > (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 cli > 27659066168) > (5) Delaying response for 2.000000 seconds > > Any advice would be appreciated? > > Regards > Steven > > > ------------------------------ > > Message: 2 > Date: Tue, 21 Feb 2023 17:47:47 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: <407E5AF6-AD76-468D-97CD-1D5858D63AC1(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Feb 21, 2023, at 4:47 PM, Steven Walters <steven.walters1(a)gmail.com> > wrote: > > Below is debug from version 3.0.1 > > To be honest... 3.0.1 is about ten years old. We're not going to worry > a lot about compatibility with every little piece of it. > > Plus, there have been many bug fixes since then, including security > fixes. If you don't like people attacking your RADIUS server, it should > have been updated regularly. > > ... > > Below is debug from version 3.2.2 > > ... > > (5) [ldap-mobile] = updated > > (5) if (!ok) { > > Change that to: > > if (!ok || !updated) { > ... > > and it will work. > > > Any advice would be appreciated? > > Upgrade regularly. > > Plus, it helps to explain *why* you have this configuration. You > generally don't have to explicitly reject users who don't have passwords. > The server will do this automatically. > > So you don't need a "if not found in LDAP, reject" configuration. Just > check LDAP. If the user isn't found, they won't have a password read from > LDAP. And the server won't be able to authenticate them. > > Alan DeKok. > > > > ------------------------------ > > Message: 3 > Date: Tue, 21 Feb 2023 17:58:56 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Some new documentation for "how to make FreeRADIUS do what I > want" > Message-ID: <98543E7C-E533-4DBC-9D27-09E9E9261717(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > We've been busy working on v4, including making sure that every aspect > of the server is extensively documented. > > > I've just written a document on "policies". But it's really "how do I > get this software to do what I want, without going crazy". > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > It gives a detailed guide to the methods used to create FreeRADIUS > configurations. > > There's also a document on why FreeRADIUS is so complex to configure: > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > This should help to explain why we can't just have a shiny button which > says "do what I want". The configuration is much, much, more complex than > that. > > v4 also has complete documentation for each unlang keyword: > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > This documentation applies to v4, but it's _mostly_ compatible with v3. > Where there are changes from v3, the documentation explains it. > > Hopefully this helps. We're not just wishing that v4 comes out one > day. We're actively working on it. > > Alan DeKok. > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > End of Freeradius-Users Digest, Vol 214, Issue 21 > ************************************************* > -- Warm Regards Steven Walters 0814287179

2 1

Some new documentation for "how to make FreeRADIUS do what I want"
by Alan DeKok 21 Feb '23

21 Feb '23

We've been busy working on v4, including making sure that every aspect of the server is extensively documented. I've just written a document on "policies". But it's really "how do I get this software to do what I want, without going crazy". https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… It gives a detailed guide to the methods used to create FreeRADIUS configurations. There's also a document on why FreeRADIUS is so complex to configure: https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… This should help to explain why we can't just have a shiny button which says "do what I want". The configuration is much, much, more complex than that. v4 also has complete documentation for each unlang keyword: https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… This documentation applies to v4, but it's _mostly_ compatible with v3. Where there are changes from v3, the documentation explains it. Hopefully this helps. We're not just wishing that v4 comes out one day. We're actively working on it. Alan DeKok.

1 0

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 21 Feb '23

21 Feb '23

Hi I am in the process of upgrading our radius servers but have one issue outstanding. Basically we receive in the radius request from mobile a MSISDN. We then go do a lookup to find the username on LDAP matching the MSISDN. In the old version everything works fine but after upgrading the radius responds with access rejection even though MSISDN finds a username on LDAP. Below are extracts from the mobile virtual server file and ldap file. mobile virtual server: # The ldap module reads passwords from the LDAP database. -ldap-mobile if (!ok) { reject ldap: user { # Where to start searching in the tree for users base_dn = "${..base_dn}" # Filter for user objects, should be specific enough # to identify a single user object. #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" #filter = "(mobileradiusCallingStationId=%{Calling-Station-Id})" filter = "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" Below is debug from version 3.0.1 rlm_ldap (ldap-mobile): Reserved connection (11) (9) ldap-mobile : expand: "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" -> '(&(mobileradiusCallingStationId=27671946862)(status=10100))' (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter '(&(mobileradiusCallingStationId=27671946862)(status=10100))' (9) ldap-mobile : Waiting for search result... (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net ,cn=radius,ou=isp" (9) ldap-mobile : Processing user attributes (9) ldap-mobile : reply:User-Name := 'onyebilanma(a)telkomsa.net ' (9) ldap-mobile : control:User-Name := ' onyebilanma(a)telkomsa.net' rlm_ldap (ldap-mobile): Released connection (11) rlm_ldap (ldap-mobile): Opening additional connection (12) rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap-mobile): Waiting for bind result... rlm_ldap (ldap-mobile): Bind successful (9) [-ldap-mobile] = ok (9) ? if (!ok) (9) ? if (!ok) -> FALSE (9) } # authorize = ok (9) Found Auth-Type = Accept (9) Auth-Type = Accept, accepting the user (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli 27671946862) (9) # Executing section post-auth from file /etc/raddb/sites-enabled/mobile (9) post-auth { (9) [exec] = noop (9) remove_reply_message_if_eap remove_reply_message_if_eap { (9) ? if (reply:EAP-Message && reply:Reply-Message) (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE (9) else else { (9) [noop] = noop (9) } # else else = noop (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (9) update reply { (9) Acct-Interim-Interval = 14400 (9) } # update reply = noop (9) } # post-auth = noop Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to 105.187.248.220 port 4017 User-Name = 'onyebilanma(a)telkomsa.net' Acct-Interim-Interval = 14400 Below is debug from version 3.2.2 rlm_ldap (ldap-mobile): Reserved connection (2) (5) ldap-mobile: EXPAND (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) (5) ldap-mobile: --> (&(mobileradiusCallingStationId=27659066168)(status=10100)) (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope "sub" (5) ldap-mobile: Waiting for search result... (5) ldap-mobile: User object found at DN "uid=ahmed.elhefnawy(a)telkomsa.net ,cn=radius,ou=isp" (5) ldap-mobile: Processing user attributes (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' rlm_ldap (ldap-mobile): Released connection (2) Need 4 more connections to reach min connections (8) Need more connections to reach 16 spares rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 pending slots used rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 rlm_ldap (ldap-mobile): Waiting for bind result... rlm_ldap (ldap-mobile): Bind successful (5) [ldap-mobile] = updated (5) if (!ok) { (5) if (!ok) -> TRUE (5) if (!ok) { (5) [reject] = reject (5) } # if (!ok) = reject (5) } # authorize = reject (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli 27659066168) (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/raddb/sites-enabled/mobile (5) Post-Auth-Type REJECT { (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = noop (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 cli 27659066168) (5) Delaying response for 2.000000 seconds Any advice would be appreciated? Regards Steven

2 1

Version 3.2.2 has been released
by Matthew Newton 16 Feb '23

16 Feb '23

We have today released FreeRADIUS version 3.2.2. Full changelog is in the source at doc/ChangeLog. Some highlights: - Ability to add a header to linelog output files - Config for xlats in rlm_rest - Default configuration improvements, such as attr_filter and SQL. - Thread stats now available from radmin - Clearer "configure" output when building from source - rlm_unbound added to packages and default build - Obsolete Dockerfiles for centos8 and debian9 removed - Fix EAP-TTLS-MSCHAPv2 with TLS 1.3 Download from the usual places: https://freeradius.org/releases/ ftp://ftp.freeradius.org/pub/freeradius/ https://github.com/FreeRADIUS/freeradius-server/releases/tag/release_3_2_2 Packages are available from Network RADIUS: https://packages.networkradius.com/ Docker images are available on Dockerhub. The default Ubuntu Docker image has been bumped from ubuntu20 to ubuntu22: https://hub.docker.com/u/freeradius -- Matthew

1 0

Multiple LDAP servers best practice
by Tony Skalski 15 Feb '23

15 Feb '23

Hi, We use EAP-PEAP and use ldap to normalize usernames and retrieve group membership (via ldaps). We recently found that our freeradius servers were only connecting to the first of four ldap servers specified in mods-available/ldap. The servers are listed on separate lines like this: server = 'ldaps://dc1.ad.stolaf.edu' server = 'ldaps://dc2.ad.stolaf.edu' server = 'ldaps://dc3.ad.stolaf.edu' server = 'ldaps://dc4.ad.stolaf.edu' The certificates used for ldaps have SANs that include our domain name ' ad.stolaf.edu' and on my dev server I found that using "server = ' ad.stolaf.edu'" will start connections with all ldap servers, modulo DNS round robin results. I consulted some openldap documentation, but am still left with the question: what is the best practice for listing and utilizing multiple LDAP servers (for both failover and load balancing)? Also, is URI or hostname more preferred? (both seem to work in my testing, I do specify "port = 636" elsewhere in the config) radiusd -X output from our production config (4 servers listed one per line): Wed Feb 15 07:38:33 2023 : Info: rlm_ldap: libldap vendor: OpenLDAP, version: 20446 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Initialising connection pool Wed Feb 15 07:38:33 2023 : Debug: pool { Wed Feb 15 07:38:33 2023 : Debug: start = 5 Wed Feb 15 07:38:33 2023 : Debug: min = 3 Wed Feb 15 07:38:33 2023 : Debug: max = 32 Wed Feb 15 07:38:33 2023 : Debug: spare = 10 Wed Feb 15 07:38:33 2023 : Debug: uses = 0 Wed Feb 15 07:38:33 2023 : Debug: lifetime = 0 Wed Feb 15 07:38:33 2023 : Debug: cleanup_interval = 30 Wed Feb 15 07:38:33 2023 : Debug: idle_timeout = 60 Wed Feb 15 07:38:33 2023 : Debug: retry_delay = 30 Wed Feb 15 07:38:33 2023 : Debug: spread = no Wed Feb 15 07:38:33 2023 : Debug: } Wed Feb 15 07:38:33 2023 : Info: rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Connecting to ldaps:// dc1.ad.stolaf.edu:636 ldaps://dc2.ad.stolaf.edu:636 ldaps:// dc3.ad.stolaf.edu:636 ldaps://dc4.ad.stolaf.edu:636 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): New libldap handle 0x564cf7a99500 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Waiting for bind result... Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Bind successful Wed Feb 15 07:38:33 2023 : Info: rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Connecting to ldaps:// dc1.ad.stolaf.edu:636 ldaps://dc2.ad.stolaf.edu:636 ldaps:// dc3.ad.stolaf.edu:636 ldaps://dc4.ad.stolaf.edu:636 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): New libldap handle 0x564cf7ac04b0 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Waiting for bind result... Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Bind successful Wed Feb 15 07:38:33 2023 : Info: rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Connecting to ldaps:// dc1.ad.stolaf.edu:636 ldaps://dc2.ad.stolaf.edu:636 ldaps:// dc3.ad.stolaf.edu:636 ldaps://dc4.ad.stolaf.edu:636 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): New libldap handle 0x564cf7aae7a0 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Waiting for bind result... Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Bind successful Wed Feb 15 07:38:33 2023 : Info: rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Connecting to ldaps:// dc1.ad.stolaf.edu:636 ldaps://dc2.ad.stolaf.edu:636 ldaps:// dc3.ad.stolaf.edu:636 ldaps://dc4.ad.stolaf.edu:636 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): New libldap handle 0x564cf7ac1390 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Waiting for bind result... Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Bind successful Wed Feb 15 07:38:33 2023 : Info: rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Connecting to ldaps:// dc1.ad.stolaf.edu:636 ldaps://dc2.ad.stolaf.edu:636 ldaps:// dc3.ad.stolaf.edu:636 ldaps://dc4.ad.stolaf.edu:636 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): New libldap handle 0x564cf7ab5cc0 Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Waiting for bind result... Wed Feb 15 07:38:33 2023 : Debug: rlm_ldap (ldap): Bind successful Connections from radius server to ldap server - note 5 connections to same server: [root@rad-dev ~]# lsof -i | grep radiusd | grep ldaps radiusd 1023016 radiusd 5u IPv6 16259147 0t0 TCP rad-dev:56548->[DEAD::BEEF]:ldaps (ESTABLISHED) radiusd 1023016 radiusd 6u IPv6 16259152 0t0 TCP rad-dev:56554->[DEAD::BEEF]:ldaps (ESTABLISHED) radiusd 1023016 radiusd 7u IPv6 16259157 0t0 TCP rad-dev:56556->[DEAD::BEEF]:ldaps (ESTABLISHED) radiusd 1023016 radiusd 8u IPv6 16259162 0t0 TCP rad-dev:56562->[DEAD::BEEF]:ldaps (ESTABLISHED) radiusd 1023016 radiusd 9u IPv6 16259167 0t0 TCP rad-dev:56566->[DEAD::BEEF]:ldaps (ESTABLISHED) dc1.ad.stolaf.edu <--> DEAD::BEEF Thanks! ajs -- *Tony Skalski (he/him/his)* System Administrator | IT Office: 507-786-3227 <(507)786-3227> 1510 St. Olaf Avenue Northfield, MN 55057 stolaf.edu

4 7

Connect ldaps(azure ad ds) user on wifi network with ttls/pap protocols
by Chris Nzengue - dejamobile externe 15 Feb '23

15 Feb '23

Hello Before introduce my issue, I would like to thank you for your help and the time you will spend for helping me . What i am trying to do: i am trying to connect users who are registry on an ldaps to access at the wifi network. The ldaps is an azure ad ds. i am also trying to use ttls/pap protocol. Why i am trying to do it?: I want do it because i want secure the wifi network and not use a single keyword. i don't want also oblige users to know a new password and id . I want they use the same password and id. i decided to use ttls protocole because i don't want have to manage a certificate server. For the pap protocol part, it is just because i saw this procotol can handle every cases. What i expect the server to do?: i expect the server check on the ldaps if the id and the password received by the acces point are right. If the id and the password are right then the user join the network. What the server does instead?: FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client AP_cisco1 { ipaddr = 192.168.200.20 require_message_authenticator = no secret = <<< secret >>> virtual_server = "inner-tunnel" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = PAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://aadds.*******.com" port = 636 identity = "cn=Radius,ou=AADDC Users, dc=*********,dc=com" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=AADDC Users,dc=********,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { tls_min_version = "1.2" start_tls = no require_cert = "never" } } Creating attribute LDAP-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/etc/freeadius/3.0/mods-available/ntlm_auth --request-nt-key --domain=********.com --username=Radius --password=R7)LhEf3Y}Uv)l" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20513 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "pap" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:342 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 60552 Listening on proxy address :: port 35305 Ready to process requests (0) Received Access-Request Id 153 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (0) User-Name = "chris.********" (0) Chargeable-User-Identity = 0x14 (0) Location-Capable = Civic-Location (0) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (0) Called-Station-Id = "00-fc-ba-e1-98-e0:radius_test" (0) NAS-Port = 1 (0) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (0) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (0) NAS-IP-Address = 192.168.200.20 (0) NAS-Identifier = "********" (0) Airespace-Wlan-Id = 6 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x020100120163687269732e6e7a656e677565 (0) Message-Authenticator = 0x974324719f4ff1b1116600ab28a17e4b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (0) (0) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) files: Waiting for search result... (0) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) files: Checking user object's memberOf attributes (0) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (0) files: Waiting for search result... (0) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Closing expired connection (4) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (3) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (2) - Hit idle_timeout limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (1) - Hit idle_timeout limit (0) files: users: Matched entry DEFAULT at line 72 (0) [files] = ok rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) ldap: Processing user attributes (0) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (0) [ldap] = updated (0) if ((ok || updated) && User-Password && !control:Auth-Type) { (0) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> chris.******** (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) update outer.session-state { (0) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (0) } # update outer.session-state = invalid (0) } # Post-Auth-Type REJECT = invalid (0) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 153 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 153 with timestamp +75 due to cleanup_delay was reached Ready to process requests (1) Received Access-Request Id 154 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (1) User-Name = "chris.********" (1) Chargeable-User-Identity = 0x14 (1) Location-Capable = Civic-Location (1) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (1) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (1) NAS-Port = 1 (1) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (1) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (1) NAS-IP-Address = 192.168.200.20 (1) NAS-Identifier = "********" (1) Airespace-Wlan-Id = 6 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100120163687269732e6e7a656e677565 (1) Message-Authenticator = 0xa0ca0c245aef7cfc9b3da3a37d812c5f (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) update control { (1) &Proxy-To-Realm := LOCAL (1) } # update control = noop (1) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (1) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) files: Waiting for search result... (1) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) files: Checking user object's memberOf attributes (1) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (1) files: Waiting for search result... (1) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need 1 more connections to reach min connections (3) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) files: users: Matched entry DEFAULT at line 72 (1) [files] = ok rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) ldap: Processing user attributes (1) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (1) [ldap] = updated (1) if ((ok || updated) && User-Password && !control:Auth-Type) { (1) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> chris.******** (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) update outer.session-state { (1) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (1) } # update outer.session-state = invalid (1) } # Post-Auth-Type REJECT = invalid (1) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 154 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (1) Cleaning up request packet ID 154 with timestamp +95 due to cleanup_delay was reached Ready to process requests (2) Received Access-Request Id 155 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (2) User-Name = "chris.********" (2) Chargeable-User-Identity = 0x14 (2) Location-Capable = Civic-Location (2) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (2) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (2) NAS-Port = 1 (2) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (2) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (2) NAS-IP-Address = 192.168.200.20 (2) NAS-Identifier = "********" (2) Airespace-Wlan-Id = 6 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020100120163687269732e6e7a656e677565 (2) Message-Authenticator = 0x1ed012aae54a89fb6558ea0019fafe02 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) update control { (2) &Proxy-To-Realm := LOCAL (2) } # update control = noop (2) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (2) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) files: Waiting for search result... (2) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) files: Checking user object's memberOf attributes (2) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (2) files: Waiting for search result... (2) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (7), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) files: users: Matched entry DEFAULT at line 72 (2) [files] = ok rlm_ldap (ldap): Reserved connection (6) (2) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) ldap: Processing user attributes (2) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (6) (2) [ldap] = updated (2) if ((ok || updated) && User-Password && !control:Auth-Type) { (2) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> chris.******** (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) update outer.session-state { (2) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (2) } # update outer.session-state = invalid (2) } # Post-Auth-Type REJECT = invalid (2) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 155 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (2) Cleaning up request packet ID 155 with timestamp +101 due to cleanup_delay was reached Ready to process requests <https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/> <https://dejamobile.com/>[cid:logo-500x500_504d48b6-dc99-43ec-874c-af726c18f56e.png] Chris Nzengue Stagiaire DEVOPS DEVOPS internship <https://www.linkedin.com/company/dejamobile> [cid:SocialLink_Linkedin_32x32_b9896d3d-92f0-40ba-b3a3-c8ead42de0f5.png] <https://www.linkedin.com/company/dejamobile> <https://www.linkedin.com/company/dejamobile> <https://www.twitter.com/dejamobile> [cid:SocialLink_Twitter_32x32_d8c0f93a-95bb-4ab2-8384-cc2e43456b2f.png] <https://twitter.com/dejamobile> Fixe / Office: +33(2)14747500 chris.nzengue(a)dejamobile.com<mailto:%7BE-mail%7D> <https://www.linkedin.com/company/dejamobile><http://www.linkedin.com/company/dejamobile><https://www.linkedin.com/company/dejamobile><https://dejamobile.com/dejamobile-at-mpe-2022/><https://www.linkedin.com/company/dejamobile/>[cid:mpe23mail_c31705da-edc4-4d9a-aa24-bb15583ff32a.png]<https://www.merchantpaymentsecosystem.com/>

2 1

unlang code to unroll a list attribute
by Hermann.Lauer＠uni-heidelberg.de 14 Feb '23

14 Feb '23

Hello All, how in unlang can a list attribute be converted into a string of the values, eg. the DHCP-Parameter-Request-List into something like: "DHCP-Subnet-Mask,DHCP-Router-Address,DHCP-Domain-Name-Server" ? Thanks and greetings Hermann

3 2

Freeradius Google Secure LDAP EAP-GTC issues
by Henning Kessler 14 Feb '23

14 Feb '23

Hello, I followed this tutorial (https://www.nasirhafeez.com/wp-comments-post.php) for testing purposes several times and it worked flawlessly. several month later I wanted to put it in production and it stop working. This is my setup: 2 Raspberry PIs with freeradius 3.0.12 (allready tried the Backport version 3.2.1 as well) Unifi AC HD AccessPoints and as clients macOS and iOS devices (tried macOS versions 11.7 to 13.1) for testing I tried an Ubuntu client as well. Binding to Google LDAP works without any issues (radtest results in Access-Accept) I even see that the Radius server sends an “Access-Accept” to the clients but shortly after the client starts another Access-Request an that fails with: (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x864de94f8144fc95 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed in handler Any idea what is happening here? Here the full output of a test with freeradius -X Ready to process requests (0) Received Access-Request Id 18 from 10.100.2.39:54686 to 10.100.1.65:1812 length 253 (0) User-Name = "klaus.mustermann" (0) NAS-IP-Address = 10.100.2.39 (0) NAS-Identifier = "8283c219e7f9" (0) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "690B866461ACEC60" (0) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (0) Mobility-Domain-Id = 46476 (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027075 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02670015016b6c6175732e6d75737465726d616e6e (0) Message-Authenticator = 0x8d4fe3c9b693e2d71ed16670b1d148a8 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 103 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 104 length 6 (0) eap: EAP session adding &reply:State = 0x33754777331d52c5 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 18 from 10.100.1.65:1812 to 10.100.2.39:54686 length 64 (0) EAP-Message = 0x016800061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x33754777331d52c5d9592c39c6f43193 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 19 from 10.100.2.39:54686 to 10.100.1.65:1812 length 411 (1) User-Name = "klaus.mustermann" (1) NAS-IP-Address = 10.100.2.39 (1) NAS-Identifier = "8283c219e7f9" (1) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "690B866461ACEC60" (1) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (1) Mobility-Domain-Id = 46476 (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027075 (1) Framed-MTU = 1400 (1) EAP-Message = 0x026800a115800000009716030100920100008e030363ce9a00af0158c4304b8191e349a5c4d7e344c71cf9ceb42fc1dc05eee1d4ea00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (1) State = 0x33754777331d52c5d9592c39c6f43193 (1) Message-Authenticator = 0xaf2835db2d901930a1abf923e81f8d4b (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 104 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x33754777331d52c5 (1) eap: Finished EAP session with state 0x33754777331d52c5 (1) eap: Previous EAP request found for state 0x33754777331d52c5, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes (1) eap_ttls: (TLS) EAP Got all data (151 bytes) (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 105 length 1004 (1) eap: EAP session adding &reply:State = 0x33754777321c52c5 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) Sent Access-Challenge Id 19 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x33754777321c52c5d9592c39c6f43193 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 20 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (2) User-Name = "klaus.mustermann" (2) NAS-IP-Address = 10.100.2.39 (2) NAS-Identifier = "8283c219e7f9" (2) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "690B866461ACEC60" (2) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (2) Mobility-Domain-Id = 46476 (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027075 (2) Framed-MTU = 1400 (2) EAP-Message = 0x026900061500 (2) State = 0x33754777321c52c5d9592c39c6f43193 (2) Message-Authenticator = 0x61c34e69e7f5f253a9fdf8868c0f8826 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 105 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x33754777321c52c5 (2) eap: Finished EAP session with state 0x33754777321c52c5 (2) eap: Previous EAP request found for state 0x33754777321c52c5, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 106 length 1004 (2) eap: EAP session adding &reply:State = 0x33754777311f52c5 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) Sent Access-Challenge Id 20 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x33754777311f52c5d9592c39c6f43193 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 21 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (3) User-Name = "klaus.mustermann" (3) NAS-IP-Address = 10.100.2.39 (3) NAS-Identifier = "8283c219e7f9" (3) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "690B866461ACEC60" (3) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (3) Mobility-Domain-Id = 46476 (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027075 (3) Framed-MTU = 1400 (3) EAP-Message = 0x026a00061500 (3) State = 0x33754777311f52c5d9592c39c6f43193 (3) Message-Authenticator = 0xc8e04779851766a986a21ceea4790d00 (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 106 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x33754777311f52c5 (3) eap: Finished EAP session with state 0x33754777311f52c5 (3) eap: Previous EAP request found for state 0x33754777311f52c5, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 107 length 1004 (3) eap: EAP session adding &reply:State = 0x33754777301e52c5 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) Sent Access-Challenge Id 21 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (3) EAP-Message = 0x016b03ec15c0000011516e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479311b30190603550403131242756464796272616e6420526f6f74204341311f301d06092a864886f70d010901161069744062756464796272616e642e6465301e170d3231303432333131353030305a170d3331303432333131353030305a3081bd310b3009060355040613024445310f300d060355040813064265726c696e310f300d060355040713064265726c696e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479312630240603550403131d42756464796272616e6420496e7465726d656469617465204341203034311f301d06092a864886f70d010901161069744062756464796272616e642e646530820222300d06092a (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x33754777301e52c5d9592c39c6f43193 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 22 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (4) User-Name = "klaus.mustermann" (4) NAS-IP-Address = 10.100.2.39 (4) NAS-Identifier = "8283c219e7f9" (4) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "690B866461ACEC60" (4) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (4) Mobility-Domain-Id = 46476 (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027075 (4) Framed-MTU = 1400 (4) EAP-Message = 0x026b00061500 (4) State = 0x33754777301e52c5d9592c39c6f43193 (4) Message-Authenticator = 0x8ebe69d74f104b81490506fbfd4fcc22 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 107 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x33754777301e52c5 (4) eap: Finished EAP session with state 0x33754777301e52c5 (4) eap: Previous EAP request found for state 0x33754777301e52c5, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 108 length 1004 (4) eap: EAP session adding &reply:State = 0x33754777371952c5 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) Sent Access-Challenge Id 22 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x33754777371952c5d9592c39c6f43193 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 23 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (5) User-Name = "klaus.mustermann" (5) NAS-IP-Address = 10.100.2.39 (5) NAS-Identifier = "8283c219e7f9" (5) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "690B866461ACEC60" (5) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (5) Mobility-Domain-Id = 46476 (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027075 (5) Framed-MTU = 1400 (5) EAP-Message = 0x026c00061500 (5) State = 0x33754777371952c5d9592c39c6f43193 (5) Message-Authenticator = 0x2954664567eb90b58df983559fafc7ef (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 108 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x33754777371952c5 (5) eap: Finished EAP session with state 0x33754777371952c5 (5) eap: Previous EAP request found for state 0x33754777371952c5, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) Peer ACKed our handshake fragment (5) eap: Sending EAP Request (code 1) ID 109 length 467 (5) eap: EAP session adding &reply:State = 0x33754777361852c5 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) Sent Access-Challenge Id 23 from 10.100.1.65:1812 to 10.100.2.39:54686 length 527 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x33754777361852c5d9592c39c6f43193 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 24 from 10.100.2.39:54686 to 10.100.1.65:1812 length 386 (6) User-Name = "klaus.mustermann" (6) NAS-IP-Address = 10.100.2.39 (6) NAS-Identifier = "8283c219e7f9" (6) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "690B866461ACEC60" (6) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (6) Mobility-Domain-Id = 46476 (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027075 (6) Framed-MTU = 1400 (6) EAP-Message = 0x026d008815800000007e16030300461000004241041bdfa74e961e11ce04aae11e59adff899c7e45c93c23a868913c8e6dbc6b61c8c93027484c43331a120609e34bb63d4a01335611c152662eda522aa015747d24140303000101160303002896671043239b41663014b73a88eb2b056a398cc8c31e8c6f1940273f2cc64b884907fe10b3c697de (6) State = 0x33754777361852c5d9592c39c6f43193 (6) Message-Authenticator = 0x02f8f3ac8779506b6dc11ac581eb8a01 (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 109 length 136 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x33754777361852c5 (6) eap: Finished EAP session with state 0x33754777361852c5 (6) eap: Previous EAP request found for state 0x33754777361852c5, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes (6) eap_ttls: (TLS) EAP Got all data (126 bytes) (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (6) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (6) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (6) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (6) eap_ttls: (TLS) Connection Established (6) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) eap_ttls: TLS-Session-Version = "TLS 1.2" (6) eap: Sending EAP Request (code 1) ID 110 length 61 (6) eap: EAP session adding &reply:State = 0x33754777351b52c5 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 24 from 10.100.1.65:1812 to 10.100.2.39:54686 length 119 (6) EAP-Message = 0x016e003d1580000000331403030001011603030028c5e315035630988a3b83c13d63026f7f68b51fc4cae498e85bec63a7b3beba6177951acbd7c9e48e (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x33754777351b52c5d9592c39c6f43193 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 25 from 10.100.2.39:54686 to 10.100.1.65:1812 length 321 (7) User-Name = "klaus.mustermann" (7) NAS-IP-Address = 10.100.2.39 (7) NAS-Identifier = "8283c219e7f9" (7) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "690B866461ACEC60" (7) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (7) Mobility-Domain-Id = 46476 (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027075 (7) Framed-MTU = 1400 (7) EAP-Message = 0x026e004715800000003d170303003896671043239b4167e00afbeca8b555b120c23769698d81a6b5a879ecc3c8fd3cd740dc135bdef5fcadd7fda6a166609e4d7957502348d9f3 (7) State = 0x33754777351b52c5d9592c39c6f43193 (7) Message-Authenticator = 0xa8b841519028def71e27cfef249be756 (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 110 length 71 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x33754777351b52c5 (7) eap: Finished EAP session with state 0x33754777351b52c5 (7) eap: Previous EAP request found for state 0x33754777351b52c5, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: (TLS) EAP Peer says that the final record size will be 61 bytes (7) eap_ttls: (TLS) EAP Got all data (61 bytes) (7) eap_ttls: Session established. Proceeding to decode tunneled attributes (7) eap_ttls: Got tunneled request (7) eap_ttls: EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_ttls: Got tunneled identity of klaus.mustermann (7) eap_ttls: Setting default EAP type for tunneled EAP session (7) eap_ttls: Sending tunneled request (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "klaus.mustermann" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 0 length 21 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_gtc to process data (7) eap_gtc: EXPAND Password: (7) eap_gtc: --> Password: (7) eap: Sending EAP Request (code 1) ID 1 length 15 (7) eap: EAP session adding &reply:State = 0xb4a2b867b4a3bebf (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0101000f0650617373776f72643a20 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb4a2b867b4a3bebfd5edaac839855c28 (7) eap_ttls: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 111 length 63 (7) eap: EAP session adding &reply:State = 0x33754777341a52c5 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 25 from 10.100.1.65:1812 to 10.100.2.39:54686 length 121 (7) EAP-Message = 0x016f003f1580000000351703030030c5e315035630988b4ad830befda4dba2a51fa8f9388f8da63a7ea11b76e432bbb988ecf99f49e2ebe5cd501621aec81b (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x33754777341a52c5d9592c39c6f43193 (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 26 from 10.100.2.39:54686 to 10.100.1.65:1812 length 317 (8) User-Name = "klaus.mustermann" (8) NAS-IP-Address = 10.100.2.39 (8) NAS-Identifier = "8283c219e7f9" (8) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) Acct-Session-Id = "690B866461ACEC60" (8) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (8) Mobility-Domain-Id = 46476 (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027075 (8) Framed-MTU = 1400 (8) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (8) State = 0x33754777341a52c5d9592c39c6f43193 (8) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 111 length 67 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf (8) eap: Finished EAP session with state 0x33754777341a52c5 (8) eap: Previous EAP request found for state 0x33754777341a52c5, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: (TLS) EAP Peer says that the final record size will be 57 bytes (8) eap_ttls: (TLS) EAP Got all data (57 bytes) (8) eap_ttls: Session established. Proceeding to decode tunneled attributes (8) eap_ttls: Got tunneled request (8) eap_ttls: EAP-Message = 0x0201001306736167616e382e53697a61626c65 (8) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_ttls: Sending tunneled request (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0201001306736167616e382e53697a61626c65 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "klaus.mustermann" (8) State = 0xb4a2b867b4a3bebfd5edaac839855c28 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 1 length 19 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (0) (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (uid=klaus.mustermann) (8) ldap: Performing search in "dc=pretendco,dc=de" with filter "(uid=klaus.mustermann)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" (8) ldap: Processing user attributes (8) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (8) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed, errno=11. rlm_ldap (ldap): Bind successful (8) [ldap] = ok (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) if (User-Password) { (8) if (User-Password) -> FALSE (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf (8) eap: Finished EAP session with state 0xb4a2b867b4a3bebf (8) eap: Previous EAP request found for state 0xb4a2b867b4a3bebf, released from the list (8) eap: Peer sent packet with method EAP GTC (6) (8) eap: Calling submodule eap_gtc to process data (8) eap_gtc: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_gtc: Auth-Type PAP { rlm_ldap (ldap): Reserved connection (1) (8) ldap: Login attempt by "klaus.mustermann" (8) ldap: Using user DN from request "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" (8) ldap: Waiting for bind result... (8) ldap: Bind successful (8) ldap: Bind as user "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" was successful rlm_ldap (ldap): Released connection (1) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed, errno=11. rlm_ldap (ldap): Bind successful (8) eap_gtc: [ldap] = ok (8) eap_gtc: } # Auth-Type PAP = ok (8) eap: Sending EAP Success (code 3) ID 1 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) post-auth { (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x03010004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "klaus.mustermann" (8) eap_ttls: Got tunneled Access-Accept (8) eap: Sending EAP Success (code 3) ID 111 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (8) post-auth { (8) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (8) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (8) update { (8) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (8) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (8) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Sent Access-Accept Id 26 from 10.100.1.65:1812 to 10.100.2.39:54686 length 184 (8) MS-MPPE-Recv-Key = 0xeb472d316fdc874c9b4fab09804dffb9627d034a793910ca0f276473f2db3e62 (8) MS-MPPE-Send-Key = 0x3cde6513ea1f92c64ee3d938a85980091ecccdeb288c640f958a8f0d4324af64 (8) EAP-Message = 0x036f0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "klaus.mustermann" (8) Framed-MTU += 994 (8) Finished request Waking up in 1.1 seconds. (9) Received Access-Request Id 26 from 10.100.2.39:38737 to 10.100.1.65:1812 length 317 (9) User-Name = "klaus.mustermann" (9) NAS-IP-Address = 10.100.2.39 (9) NAS-Identifier = "8283c219e7f9" (9) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (9) Connect-Info = "CONNECT 0Mbps 802.11b" (9) Acct-Session-Id = "690B866461ACEC60" (9) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (9) Mobility-Domain-Id = 46476 (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027075 (9) Framed-MTU = 1400 (9) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (9) State = 0x33754777341a52c5d9592c39c6f43193 (9) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 111 length 67 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed in handler (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> klaus.mustermann (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (10) Received Access-Request Id 26 from 10.100.2.39:45497 to 10.100.1.65:1812 length 317 (10) User-Name = "klaus.mustermann" (10) NAS-IP-Address = 10.100.2.39 (10) NAS-Identifier = "8283c219e7f9" (10) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (10) Connect-Info = "CONNECT 0Mbps 802.11b" (10) Acct-Session-Id = "690B866461ACEC60" (10) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (10) Mobility-Domain-Id = 46476 (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027075 (10) Framed-MTU = 1400 (10) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (10) State = 0x33754777341a52c5d9592c39c6f43193 (10) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 111 length 67 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (10) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (10) eap: Failed in handler (10) [eap] = invalid (10) } # authenticate = invalid (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) Post-Auth-Type REJECT { (10) attr_filter.access_reject: EXPAND %{User-Name} (10) attr_filter.access_reject: --> klaus.mustermann (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 (10) [attr_filter.access_reject] = updated (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (10) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (10) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (10) [eap] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # Post-Auth-Type REJECT = updated (10) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.2 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:38737 length 20 Waking up in 0.1 seconds. (0) Cleaning up request packet ID 18 with timestamp +35 due to cleanup_delay was reached Waking up in 0.1 seconds. (1) Cleaning up request packet ID 19 with timestamp +35 due to cleanup_delay was reached (2) Cleaning up request packet ID 20 with timestamp +35 due to cleanup_delay was reached (3) Cleaning up request packet ID 21 with timestamp +35 due to cleanup_delay was reached (4) Cleaning up request packet ID 22 with timestamp +35 due to cleanup_delay was reached (5) Cleaning up request packet ID 23 with timestamp +35 due to cleanup_delay was reached (6) Cleaning up request packet ID 24 with timestamp +35 due to cleanup_delay was reached (7) Cleaning up request packet ID 25 with timestamp +35 due to cleanup_delay was reached (10) Sending delayed response (10) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:45497 length 20 Any Idea what I am doing wrong here? Regards Henning

3 4

Freeradius with MikroTik
by Abel Apolonio 13 Feb '23

13 Feb '23

2 1

eap PEAP + tls 1.3
by dextá 10 Feb '23

10 Feb '23

Hi, Windows 11 22h2 does not connect via eap PEAP. I checked that in freeradius version 3.2.1 PEAP supports tls 1.3, but still the error below occurs. https://github.com/FreeRADIUS/freeradius-server/blob/v3.2.x/raddb/mods-avai… eap: Peer sent EAP Response (code 2) ID 5 length 34 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/freeradius/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0x85400eb38645171a (14) eap: Finished EAP session with state 0x85400eb38645171a (14) eap: Previous EAP request found for state 0x85400eb38645171a, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: (TLS) EAP Peer says that the final record size will be 24 bytes (14) eap_peap: (TLS) EAP Got all data (24 bytes) (14) eap_peap: (TLS) send TLS 1.3 Alert, fatal bad_record_mac (14) eap_peap: ERROR: (TLS) Alert write:fatal:bad record mac (14) eap_peap: (TLS) Server : Need to read more data: error (14) eap_peap: ERROR: (TLS) Failed reading from OpenSSL: error:1408F119:SSL routines:ssl3_get_record:decryption failed or bad record mac (14) eap_peap: ERROR: (TLS) System call (I/O) error (-1) (14) eap_peap: ERROR: (TLS) EAP Receive handshake failed during operation (14) eap_peap: ERROR: [eaptls process] = fail (14) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (14) eap: Sending EAP Failure (code 4) ID 5 length 4 (14) eap: Failed in EAP select (14) [eap] = invalid Any tips?

2 3

official repository for centos 7
by Anatoliy Kushner 10 Feb '23

10 Feb '23

Hi , trying both versions from freeradius.org 3.0.26 and 3.2.1 , in both cases while communicating with oracle db via odbc driver I got same error (11) sql: Executing select query: select * from table(radius.pkg_freeradius_auth.radcheck('itest', '100.64.0.1', '8ef5.5e4c.9e0a')) rlm_sql_unixodbc: 22003 [Oracle][ODBC]Numeric value out of range. (11) sql: ERROR: Error fetching row (11) sql: ERROR: Unknown error At the same time with centos freeradius release 3.0.13 it works fine. Also same query via isql client works fine , without any errors Found old issue on github , but think it should be resolved in these versions. https://github.com/FreeRADIUS/freeradius-server/issues/2822

3 8

Using "sql_session_start" does not insert a record into the radacct table.
by Conrad Classen 10 Feb '23

10 Feb '23

Hi everyone I am having a weird issue that can hopefully be easily resolved by someone on the group. I suspect that I may have missed a setting. No record is being inserted into the radacct table after a successful authentication with the sql_session_start queries enabled and the sites-enabled/default files has the line uncommented. debug info here below with all personalised info filtered. -- Conrad Classen FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/postgresql/queries.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sradutmp including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/canonicalization including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 15 max_requests = 186000 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_postgresql" server = "10.255.0.58" port = 5432 login = "radius" password = <<< secret >>> radius_db = "dbname=radius host=10.255.0.58 port=5432 user=radius password=r4d1u5u53r" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-none}}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT GroupName FROM radusergroup_connectnet_v WHERE UserName='%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(RadAcctId) FROM radacct a LEFT OUTER JOIN nasreload n USING (NASIPAddress) WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL AND (a.AcctStartTime > n.ReloadTime OR n.ReloadTime IS NULL)" simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL AND (a.AcctStartTime > n.reloadtime OR n.reloadtime IS NULL)" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no query_timeout = 5 accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "INSERT INTO nasreload (NASIPAddress, ReloadTime) VALUES ('%{NAS-IP-Address}', TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l})) ON CONFLICT ON (NASIPAddress) DO UPDATE SET ReloadTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "INSERT INTO nasreload (NASIPAddress, ReloadTime) VALUES ('%{NAS-IP-Address}', TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l})) ON CONFLICT ON (NASIPAddress) DO UPDATE SET ReloadTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l})" } start { query = "UPDATE radacct SET AcctSessionId = '%{Acct-Session-Id}', AcctUniqueId = '%{Acct-Unique-Session-Id}', AcctAuthentic = '%{Acct-Authentic}', ConnectInfo_start = '%{Connect-Info}', ServiceType = '%{Service-Type}', FramedProtocol = '%{Framed-Protocol}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, FramedIPv6Address = NULLIF('%{Framed-IPv6-Address}', '')::inet, FramedIPv6Prefix = NULLIF('%{Framed-IPv6-Prefix}', '')::inet, FramedInterfaceId = NULLIF('%{Framed-Interface-Id}', ''), DelegatedIPv6Prefix = NULLIF('%{Delegated-IPv6-Prefix}', '')::inet, AcctStartTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } interim-update { query = "UPDATE radacct SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, FramedIPv6Address = NULLIF('%{Framed-IPv6-Address}', '')::inet, FramedIPv6Prefix = NULLIF('%{Framed-IPv6-Prefix}', '')::inet, FramedInterfaceId = NULLIF('%{Framed-Interface-Id}', ''), DelegatedIPv6Prefix = NULLIF('%{Delegated-IPv6-Prefix}', '')::inet, AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, AcctInterval = (%{%{integer:Event-Timestamp}:-%l} - EXTRACT(EPOCH FROM (COALESCE(AcctUpdateTime, AcctStartTime)))), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } stop { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (%{%{integer:Event-Timestamp}:-%l} - EXTRACT(EPOCH FROM(AcctStartTime)))), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctTerminateCause = '%{Acct-Terminate-Cause}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, FramedIPv6Address = NULLIF('%{Framed-IPv6-Address}', '')::inet, FramedIPv6Prefix = NULLIF('%{Framed-IPv6-Prefix}', '')::inet, FramedInterfaceId = NULLIF('%{Framed-Interface-Id}', ''), DelegatedIPv6Prefix = NULLIF('%{Delegated-IPv6-Prefix}', '')::inet, ConnectInfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, calledstationid, callingstationid, authdate ) VALUES('%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%S.%M' )" } } rlm_sql (sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql postgresql { send_application_name = yes } rlm_sql (sql): Attempting to connect to database "dbname=radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=radius port=5432 user=XXXXX connect_timeout=5 application_name='FreeRADIUS 3.2.1 - radiusd (sql)' Connected to database 'radius' on 'aaa.bbb.ccc.ddd' server version 150001, protocol version 3, backend PID 4157105 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 7 , fields = 6 rlm_sql (sql): Adding client 41.208.51.188/32 (cngmpvt-mtn-sec-red) to global clients list rlm_sql (jjj.kkk.lll.mmm): Client "jjj-kkk-lll-mmm" (sql) added rlm_sql (sql): Adding client 127.0.0.1/32 (localhost) to global clients list rlm_sql (127.0.0.1): Client "localhost" (sql) added rlm_sql (sql): Released connection (0) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=radius port=5432 user=XXXXX connect_timeout=5 application_name='FreeRADIUS 3.2.1 - radiusd (sql)' Connected to database 'radius' on 'aaa.bbb.ccc.ddd' server version 150001, protocol version 3, backend PID 4157107 # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "files" from file /etc/freeradius/mods-enabled/files # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 recv_buff = 65536 limit { max_pps = 1000 max_connections = 32 lifetime = 0 idle_timeout = 10 } } listen { type = "acct" ipaddr = * port = 0 limit { max_pps = 1000 max_connections = 32 lifetime = 0 idle_timeout = 10 } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Ready to process requests (9) Received Access-Request Id 55 from jjj.kkk.lll.mmm:13856 to 192.168.0.10:1812 length 360 (9) Calling-Station-Id = "27xxxxxxxxx" (9) User-Name = "27xxxxxxxxx" (9) NAS-IP-Address = jjj.kkk.lll.mmm (9) NAS-Identifier = "nas-id-name" (9) Called-Station-Id = "nas-csid" (9) Service-Type = Framed-User (9) Framed-Protocol = GPRS-PDP-Context (9) NAS-Port-Type = Wireless-Other (9) 3GPP-IMSI = "<hidden>" (9) 3GPP-IMSI-MCC-MNC = "<hidden>" (9) 3GPP-NSAPI = "6" (9) 3GPP-Charging-ID = 0000000000 (9) 3GPP-Charging-Characteristics = "0800" (9) 3GPP-SGSN-Address = nnn.ooo.ppp.qqq (9) 3GPP-GGSN-Address = rrr.sss.ttt.uuu.vvv (9) 3GPP-RAT-Type = EUTRAN (9) 3GPP-User-Location-Info = 0x<hidden> (9) 3GPP-SGSN-MCC-MNC = "<hidden>" (9) 3GPP-GGSN-MCC-MNC = "<hidden>" (9) 3GPP-Selection-Mode = "0" (9) 3GPP-MS-Time-Zone = 0x0000 (9) 3GPP-GPRS-Negotiated-QoS-profile = "08-04060041893700129DA0" (9) 3GPP-PDP-Type = 0 (9) 3GPP-Negotiated-DSCP = 0 (9) Framed-IP-Address = 192.168.10.111 (9) NAS-Port = 1002109 (9) User-Password = "<hidden>" (9) # Executing section authorize from file /etc/freeradius/sites-enabled/default (9) authorize { (9) policy check_user_type { (9) if (&Calling-Station-Id) { (9) if (&Calling-Station-Id) -> TRUE (9) if (&Calling-Station-Id) { (9) if (&Calling-Station-Id =~ /27[[:digit:]]+/) { (9) if (&Calling-Station-Id =~ /27[[:digit:]]+/) -> TRUE (9) if (&Calling-Station-Id =~ /27[[:digit:]]+/) { (9) update request { (9) EXPAND %{Calling-Station-Id} (9) --> 27000000000 (9) &User-Name := 27000000000 (9) &User-Password := "<hidden>" (9) &CHAP-Challenge !* ANY (9) &CHAP-Password !* ANY (9) &MS-CHAP-Challenge !* ANY (9) &MS-CHAP2-Response !* ANY (9) } # update request = noop (9) update reply { (9) EXPAND %{Calling-Station-Id} (9) --> 27000000000 (9) &Calling-Station-Id := 27000000000 (9) } # update reply = noop (9) update control { (9) &Cleartext-Password := 'void' (9) } # update control = noop (9) } # if (&Calling-Station-Id =~ /27[[:digit:]]+/) = noop (9) ... skipping else: Preceding "if" was taken (9) } # if (&Calling-Station-Id) = noop (9) } # policy check_user_type = noop (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = noop (9) } # policy filter_username = noop (9) policy filter_password { (9) if (&User-Password && (&User-Password != "%{string:User-Password}")) { (9) EXPAND %{string:User-Password} (9) --> void (9) if (&User-Password && (&User-Password != "%{string:User-Password}")) -> FALSE (9) } # policy filter_password = noop (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "27000000000", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) [files] = noop (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-none}} (9) sql: --> 27000000000 (9) sql: SQL-User-Name set to '27000000000' rlm_sql (sql): Reserved connection (4) (9) sql: EXPAND SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id (9) sql: --> SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '27000000000' ORDER BY id (9) sql: Executing select query: SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '27000000000' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 5 (9) sql: User found in radcheck table (9) sql: Conditional check items matched, merging assignment check items (9) sql: Calling-Station-Id := "27000000000" (9) sql: EXPAND SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id (9) sql: --> SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '27000000000' ORDER BY id (9) sql: Executing select query: SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '27000000000' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (9) sql: EXPAND SELECT GroupName FROM radusergroup_connectnet_v WHERE UserName='%{SQL-User-Name}' ORDER BY priority (9) sql: --> SELECT GroupName FROM radusergroup_connectnet_v WHERE UserName='27000000000' ORDER BY priority (9) sql: Executing select query: SELECT GroupName FROM radusergroup_connectnet_v WHERE UserName='27000000000' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (9) sql: User found in the group table (9) sql: EXPAND SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{SQL-Group}' ORDER BY id (9) sql: --> SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = 'GROUP_NAME' ORDER BY id (9) sql: Executing select query: SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = 'GROUP_NAME' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 4 , fields = 5 (9) sql: Group "APN-NAME": Conditional check items matched (9) sql: Group "APN-NAME": Merging assignment check items (9) sql: Cleartext-Password := "<hidden>" (9) sql: Simultaneous-Use := 1 (9) sql: Framed-Protocol := GPRS-PDP-Context (9) sql: Called-Station-Id := "nas-csid" (9) sql: EXPAND SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{SQL-Group}' ORDER BY id (9) sql: --> SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = 'GROUP_NAME' ORDER BY id (9) sql: Executing select query: SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = 'GROUP_NAME' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 9 , fields = 5 (9) sql: Group "GROUP_NAME": Merging reply items (9) sql: Session-Timeout := 86400 (9) sql: Idle-Timeout := 0 (9) sql: Service-Type := Framed-User (9) sql: Framed-IP-Netmask := 255.255.255.255 (9) sql: MS-Primary-DNS-Server := 8.8.8.8 (9) sql: MS-Secondary-DNS-Server := 8.8.4.4 (9) sql: Framed-IP-Netmask := 255.255.255.255 (9) sql: Framed-MTU := 1500 (9) sql: Fall-Through := No rlm_sql (sql): Released connection (4) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=radius port=5432 user=XXXXX connect_timeout=5 application_name='FreeRADIUS 3.2.1 - radiusd (sql)' Connected to database 'radius' on server version 150001, protocol version 3, backend PID 4157108 (9) [sql] = ok (9) [expiration] = noop (9) [logintime] = noop (9) [pap] = updated (9) } # authorize = updated (9) Found Auth-Type = PAP (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) Auth-Type PAP { (9) pap: Login attempt with password (9) pap: Comparing with "known good" Cleartext-Password (9) pap: User authenticated successfully (9) [pap] = ok (9) } # Auth-Type PAP = ok (9) # Executing section session from file /etc/freeradius/sites-enabled/default (9) session { (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-none}} (9) sql: --> 27000000000 (9) sql: SQL-User-Name set to '27000000000' rlm_sql (sql): Reserved connection (0) (9) sql: EXPAND SELECT COUNT(RadAcctId) FROM radacct a LEFT OUTER JOIN nasreload n USING (NASIPAddress) WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL AND (a.AcctStartTime > n.ReloadTime OR n.ReloadTime IS NULL) (9) sql: --> SELECT COUNT(RadAcctId) FROM radacct a LEFT OUTER JOIN nasreload n USING (NASIPAddress) WHERE UserName='27000000000' AND AcctStopTime IS NULL AND (a.AcctStartTime > n.ReloadTime OR n.ReloadTime IS NULL) (9) sql: Executing select query: SELECT COUNT(RadAcctId) FROM radacct a LEFT OUTER JOIN nasreload n USING (NASIPAddress) WHERE UserName='27000000000' AND AcctStopTime IS NULL AND (a.AcctStartTime > n.ReloadTime OR n.ReloadTime IS NULL) rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 rlm_sql (sql): Released connection (0) (9) [sql] = ok (9) } # session = ok (9) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (9) post-auth { (9) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (9) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (9) update { (9) No attributes updated for RHS &session-state: (9) } # update = noop (9) policy sql_session_start.post-auth { (9) policy acct_unique { (9) update request { (9) &Tmp-String-9 := "cnnet:" (9) } # update request = noop (9) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) { (9) EXPAND %{hex:&Class} (9) --> (9) EXPAND ^%{hex:&Tmp-String-9} (9) --> ^636e6e65743a (9) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) -> FALSE (9) else { (9) update request { (9) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (9) --> 7fc6a73a5dc5f8844e53d1534e63691a (9) &Acct-Unique-Session-Id := 7fc6a73a5dc5f8844e53d1534e63691a (9) } # update request = noop (9) } # else = noop (9) update request { (9) &Tmp-String-9 !* ANY (9) } # update request = noop (9) } # policy acct_unique = noop (9) update request { (9) &Acct-Status-Type := Start (9) } # update request = noop (9) sql: EXPAND %{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query} (9) sql: --> type.start.query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (5) (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-none}} (9) sql: --> 27000000000 (9) sql: SQL-User-Name set to '27000000000' (9) sql: EXPAND UPDATE radacct SET AcctSessionId = '%{Acct-Session-Id}', AcctUniqueId = '%{Acct-Unique-Session-Id}', AcctAuthentic = '%{Acct-Authentic}', ConnectInfo_start = '%{Connect-Info}', ServiceType = '%{Service-Type}', FramedProtocol = '%{Framed-Protocol}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, FramedIPv6Address = NULLIF('%{Framed-IPv6-Address}', '')::inet, FramedIPv6Prefix = NULLIF('%{Framed-IPv6-Prefix}', '')::inet, FramedInterfaceId = NULLIF('%{Framed-Interface-Id}', ''), DelegatedIPv6Prefix = NULLIF('%{Delegated-IPv6-Prefix}', '')::inet, AcctStartTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL (9) sql: --> UPDATE radacct SET AcctSessionId = '', AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a', AcctAuthentic = '', ConnectInfo_start = '', ServiceType = 'Framed-User', FramedProtocol = 'GPRS-PDP-Context', FramedIPAddress = NULLIF('10.226.166.197', '')::inet, FramedIPv6Address = NULLIF('', '')::inet, FramedIPv6Prefix = NULLIF('', '')::inet, FramedInterfaceId = NULLIF('', ''), DelegatedIPv6Prefix = NULLIF('', '')::inet, AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789) WHERE AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a' AND AcctStopTime IS NULL (9) sql: Executing query: UPDATE radacct SET AcctSessionId = '', AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a', AcctAuthentic = '', ConnectInfo_start = '', ServiceType = 'Framed-User', FramedProtocol = 'GPRS-PDP-Context', FramedIPAddress = NULLIF('10.226.166.197', '')::inet, FramedIPv6Address = NULLIF('', '')::inet, FramedIPv6Prefix = NULLIF('', '')::inet, FramedInterfaceId = NULLIF('', ''), DelegatedIPv6Prefix = NULLIF('', '')::inet, AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789) WHERE AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a' AND AcctStopTime IS NULL rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 0 (9) sql: SQL query returned: success (9) sql: 0 record(s) updated (9) sql: Trying next query... (9) sql: EXPAND UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), ConnectInfo_start = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (9) sql: --> UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789), ConnectInfo_start = '' WHERE AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a' (9) sql: Executing query: UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789), ConnectInfo_start = '' WHERE AcctUniqueId = '7fc6a73a5dc5f8844e53d1534e63691a' rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 0 (9) sql: SQL query returned: success (9) sql: 0 record(s) updated (9) sql: No additional queries configured rlm_sql (sql): Released connection (5) (9) [sql.accounting] = noop (9) } # policy sql_session_start.post-auth = noop (9) sql: EXPAND .query (9) sql: --> .query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (9) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-none}} (9) sql: --> 27000000000 (9) sql: SQL-User-Name set to '27000000000' (9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, calledstationid, callingstationid, authdate ) VALUES('%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%S.%M' ) (9) sql: --> INSERT INTO radpostauth (username, pass, reply, calledstationid, callingstationid, authdate ) VALUES('27000000000', 'void', 'Access-Accept', 'connectnet.net', '27000000000', '2023-02-09 12:33:09.046870' ) (9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, calledstationid, callingstationid, authdate ) VALUES('27000000000', 'void', 'Access-Accept', 'connectnet.net', '27000000000', '2023-02-09 12:33:09.046870' ) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (9) sql: SQL query returned: success (9) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (9) [sql] = ok (9) [exec] = noop (9) policy insert_acct_class { (9) update reply { (9) EXPAND ai:%{md5:%t,%{Packet-Src-Port},%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}},%{NAS-IP-Address},%{Calling-Station-ID},%{User-Name},%{session-state:User-Name} } (9) --> ai:38988ce3f4859a0670b0522ecb21a9e0 (9) &Class = 0x636e6e65743a3338393838636533663438353961303637306230353232656362323161396530 (9) } # update reply = noop (9) } # policy insert_acct_class = noop (9) } # post-auth = ok (9) Login OK: [27000000000] (from client VCM-CN-NET-APN-NAS1 port 1002109 cli 27000000000) (9) Sent Access-Accept Id 55 from 192.168.0.10:1812 to aaa.bbb.ccc.ddd:13856 length 137 (9) Calling-Station-Id = "27000000000" (9) Session-Timeout = 86400 (9) Idle-Timeout = 0 (9) Service-Type = Framed-User (9) Framed-IP-Netmask = 255.255.255.255 (9) MS-Primary-DNS-Server = 8.8.8.8 (9) MS-Secondary-DNS-Server = 8.8.4.4 (9) Framed-IP-Netmask = 255.255.255.255 (9) Framed-MTU = 1500 (9) Class = 0x636e6e65743a3338393838636533663438353961303637306230353232656362323161396530 (9) Finished request Waking up in 14.9 seconds. (16) Received Accounting-Request Id 138 from aaa.bbb.ccc.ddd:13216 to 192.168.0.10:1813 length 468 (16) User-Name = "27000000000" (16) Calling-Station-Id = "27000000000" (16) NAS-IP-Address = aaa.bbb.ccc.ddd (16) Acct-Status-Type = Start (16) NAS-Identifier = "nas-id-name" (16) Service-Type = Framed-User (16) Framed-Protocol = GPRS-PDP-Context (16) NAS-Port-Type = Wireless-Other (16) 3GPP-IMSI = "<hidden>" (16) 3GPP-IMSI-MCC-MNC = "<hidden>" (16) 3GPP-NSAPI = "5" (16) 3GPP-Selection-Mode = "0" (16) 3GPP-Charging-ID = 0000000000 (16) 3GPP-GPRS-Negotiated-QoS-profile = "99-136212739673737405FFFF" (16) 3GPP-Charging-Characteristics = "0800" (16) Called-Station-Id = "nas-csid" (16) 3GPP-GGSN-MCC-MNC = "<hidden>" (16) 3GPP-Negotiated-DSCP = 0 (16) 3GPP-RAT-Type = GERAN (16) 3GPP-IMEISV = "<hidden>" (16) 3GPP-PDP-Type = 0 (16) Acct-Session-Id = "C42EA1E54341140D" (16) 3GPP-SGSN-Address = jjj.kkk.lll.mmm (16) 3GPP-GGSN-Address = nnn.ooo.ppp.qqq (16) Acct-Authentic = RADIUS (16) Class = 0x636e6e65743a3235336466303333623266316663646662313132396562396434343563643634 (16) Acct-Multi-Session-Id = "C42EA1E54341140D" (16) Framed-MTU = 1500 (16) 3GPP-User-Location-Info = 0x<hidden> (16) 3GPP-SGSN-MCC-MNC = "<hidden>" (16) Event-Timestamp = "Feb 9 2023 12:33:09 SAST" (16) Framed-IP-Address = 192.168.10.111 (16) NAS-Port = 829926 (16) # Executing section preacct from file /etc/freeradius/sites-enabled/default (16) preacct { (16) policy check_user_type { (16) if (&Calling-Station-Id) { (16) if (&Calling-Station-Id) -> TRUE (16) if (&Calling-Station-Id) { (16) if (&Calling-Station-Id =~ /27[[:digit:]]+/) { (16) if (&Calling-Station-Id =~ /27[[:digit:]]+/) -> TRUE (16) if (&Calling-Station-Id =~ /27[[:digit:]]+/) { (16) update request { (16) EXPAND %{Calling-Station-Id} (16) --> 27000000000 (16) &User-Name := 27000000000 (16) &User-Password := "void" (16) &CHAP-Challenge !* ANY (16) &CHAP-Password !* ANY (16) &MS-CHAP-Challenge !* ANY (16) &MS-CHAP2-Response !* ANY (16) } # update request = noop (16) update reply { (16) EXPAND %{Calling-Station-Id} (16) --> 27000000000 (16) &Calling-Station-Id := 27000000000 (16) } # update reply = noop (16) update control { (16) &Cleartext-Password := 'void' (16) } # update control = noop (16) } # if (&Calling-Station-Id =~ /27[[:digit:]]+/) = noop (16) ... skipping else: Preceding "if" was taken (16) } # if (&Calling-Station-Id) = noop (16) } # policy check_user_type = noop (16) [preprocess] = ok (16) update request { (16) EXPAND %{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}} (16) --> 1675938789 (16) &FreeRADIUS-Acct-Session-Start-Time = Feb 9 2023 12:33:09 SAST (16) } # update request = noop (16) policy acct_unique { (16) update request { (16) &Tmp-String-9 := "cnnet:" (16) } # update request = noop (16) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) { (16) EXPAND %{hex:&Class} (16) --> 636e6e65743a3235336466303333623266316663646662313132396562396434343563643634 (16) EXPAND ^%{hex:&Tmp-String-9} (16) --> ^636e6e65743a (16) EXPAND %{string:&Class} (16) --> cnnet:253df033b2f1fcdfb1129eb9d445cd64 (16) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) -> TRUE (16) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) { (16) update request { (16) EXPAND %{md5:%{1},%{Acct-Session-ID}} (16) --> 45447ac6583ad4d69a965e7ba426567c (16) &Acct-Unique-Session-Id := 45447ac6583ad4d69a965e7ba426567c (16) } # update request = noop (16) } # if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^cnnet:([0-9a-f]{32})/i)) = noop (16) ... skipping else: Preceding "if" was taken (16) update request { (16) &Tmp-String-9 !* ANY (16) } # update request = noop (16) } # policy acct_unique = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "27000000000", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) } # preacct = ok (16) # Executing section accounting from file /etc/freeradius/sites-enabled/default (16) accounting { (16) sradutmp: EXPAND /var/log/freeradius/sradutmp (16) sradutmp: --> /var/log/freeradius/sradutmp (16) sradutmp: EXPAND %{User-Name} (16) sradutmp: --> 27000000000 (16) [sradutmp] = ok (16) sql: EXPAND %{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query} (16) sql: --> type.start.query (16) sql: Using query template 'query' rlm_sql (sql): Reserved connection (5) (16) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-none}} (16) sql: --> 27000000000 (16) sql: SQL-User-Name set to '27000000000' (16) sql: EXPAND UPDATE radacct SET AcctSessionId = '%{Acct-Session-Id}', AcctUniqueId = '%{Acct-Unique-Session-Id}', AcctAuthentic = '%{Acct-Authentic}', ConnectInfo_start = '%{Connect-Info}', ServiceType = '%{Service-Type}', FramedProtocol = '%{Framed-Protocol}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, FramedIPv6Address = NULLIF('%{Framed-IPv6-Address}', '')::inet, FramedIPv6Prefix = NULLIF('%{Framed-IPv6-Prefix}', '')::inet, FramedInterfaceId = NULLIF('%{Framed-Interface-Id}', ''), DelegatedIPv6Prefix = NULLIF('%{Delegated-IPv6-Prefix}', '')::inet, AcctStartTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL (16) sql: --> UPDATE radacct SET AcctSessionId = 'C42EA1E54341140D', AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c', AcctAuthentic = 'RADIUS', ConnectInfo_start = '', ServiceType = 'Framed-User', FramedProtocol = 'GPRS-PDP-Context', FramedIPAddress = NULLIF('172.20.182.148', '')::inet, FramedIPv6Address = NULLIF('', '')::inet, FramedIPv6Prefix = NULLIF('', '')::inet, FramedInterfaceId = NULLIF('', ''), DelegatedIPv6Prefix = NULLIF('', '')::inet, AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789) WHERE AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c' AND AcctStopTime IS NULL (16) sql: Executing query: UPDATE radacct SET AcctSessionId = 'C42EA1E54341140D', AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c', AcctAuthentic = 'RADIUS', ConnectInfo_start = '', ServiceType = 'Framed-User', FramedProtocol = 'GPRS-PDP-Context', FramedIPAddress = NULLIF('172.20.182.148', '')::inet, FramedIPv6Address = NULLIF('', '')::inet, FramedIPv6Prefix = NULLIF('', '')::inet, FramedInterfaceId = NULLIF('', ''), DelegatedIPv6Prefix = NULLIF('', '')::inet, AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789) WHERE AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c' AND AcctStopTime IS NULL rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 0 (16) sql: SQL query returned: success (16) sql: 0 record(s) updated (16) sql: Trying next query... (16) sql: EXPAND UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), AcctUpdateTime = TO_TIMESTAMP(%{%{integer:Event-Timestamp}:-%l}), ConnectInfo_start = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (16) sql: --> UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789), ConnectInfo_start = '' WHERE AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c' (16) sql: Executing query: UPDATE radacct SET AcctStartTime = TO_TIMESTAMP(1675938789), AcctUpdateTime = TO_TIMESTAMP(1675938789), ConnectInfo_start = '' WHERE AcctUniqueId = '45447ac6583ad4d69a965e7ba426567c' rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 0 (16) sql: SQL query returned: success (16) sql: 0 record(s) updated (16) sql: No additional queries configured rlm_sql (sql): Released connection (5) (16) [sql] = noop (16) [exec] = noop (16) attr_filter.accounting_response: EXPAND %{User-Name} (16) attr_filter.accounting_response: --> 27000000000 (16) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (16) [attr_filter.accounting_response] = updated (16) } # accounting = updated (16) Sent Accounting-Response Id 138 from 192.168.0.10:1813 to aaa.bbb.ccc.ddd:13216 length 20 (16) Finished request (16) Cleaning up request packet ID 138 with timestamp +1 due to done Waking up in 14.6 seconds.

2 5