April 2023 - Freeradius-Users - lists.freeradius.org

Authenticate to AD but only allow certain group
by Brian C. Huffman 16 Aug '25

16 Aug '25

All, I've got authentication working nicely with MSCHAP, but now I'd like to only allow users that are members of a certain AD group. I would prefer to have this happen only when requests come from a specific client (wireless access point). In this case the idea is to have users only be able to get wireless access when they're in a specific AD group. How can I do this in freeradius? Thanks, Brian

7 18

Monitor the number of open EAP sessions
by Sergey Marochkin 23 Nov '23

23 Nov '23

Hi everyone! I am facing a problem when freeradius reports that the limit of open sessions has been reached. These are log entries, like "Too many open sessions. Try increasing "max_sessions" in the EAP module configuration". During the debugging, it was determined that some ios devices (ipad/iphone), for a reason unknown to me, cyclically cannot complete eap/tls authentication process. I found that these devices successfully start communicating with the NAS (send EAP-Response/Identity). But after receiving the (TLS Start)-message, they no longer send the (TLS client_hello)-message, and restart the association process with the access point and therefore open a new EAP session. If recreate a wifi connection on such a device, it will connect successfully. Until I find the root cause of this behavior, I would like to monitor the number of open sessions of the radius server. But I couldn't find a suitable way to do it. Here is what I tried: - use the "status server" tool, but there is no suitable one among its counters - use tool "control-socket" and radmin but also i didn't find suitable counter Can you help me with this question? Thanks!

2 4

traffic quota control
by ReZa Esfahani 02 May '23

02 May '23

hi I want to control traffic quota for users in freeradius, for example, I want to set a monthly 20GB traffic quota for a specific group. How can I do that ? and after the traffic quota is reached , freeradius disconnects the user? and my last question is rlm_quota module in freeradius for this or do we have to do it in another way? thank you

3 3

radperf and radius returns challenge
by Mesut GULNAZ 29 Apr '23

29 Apr '23

I am trying to make a performance test for a radius server that sends challenge instead of Access-Accepted but radperf marks all responses as fail Total failed : 100 this is the command I used. radperf -q -s -a pap -c 100 -T test.rad -f user.csv -p 100 -r 1 -t 60 localhost:1812 auth testing123 what can I do? any help is highly appreciated.

2 1

FW: Need help with EAP-AKA configuration
by Mrudul Dighe 26 Apr '23

26 Apr '23

Hello, I am trying to configure EAP-AKA virtual-server in FreeRADIUS to perform authentication of multiple sim cards we own. We have followed the documentation and configured below in sites-enabled/eap-aka-sim and able to authenticate successful with EAPOL_TEST tool using same Ki and OPc: <<<<<<<<<<<<<<<<<<<<<<<<<<<< send Challenge-Request { &control.SIM-Ki := 0x465b5ce8b199b49faa5f0a2ee238a6bc &control.SIM-Opc := 0xcd63cb71954a9f4e48a5994e37a02baf &control.SIM-SQN := 3 } >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, this helps in authenticating only the imsi with above Ki/OPc. But our requirement is to authenticate multiple such IMSIs/SIMs with their Ki/OPc whose values we are aware of. May I know how to specify the list of imsi/Users and make it work instead of hardcoding like above? We tried adding following line in 'users' file in raddb/ folder and removed above hardcoding in Challenge-Response part of eap-aka-sim virtual-server configuration : "315010000000002(a)wlan.mnc010.mcc315.3gppnetwork.org<mailto:315010000000002@wlan.mnc010.mcc315.3gppnetwork.org> SIM-Ki := 770db7f9275c47eb3d12b2024caa3548, SIM-Opc := 6245aedadf3ebbb82b0f62df52e0de12, SIM-SQN := 3" But it's not working. I have attached the radiusd Logs with the mail. Where I see following error - """ (0.0) eap-aka-sim - WARNING: Could not find or derive data for UMTS vector (0.0) eap-aka-sim - ERROR: Failed retrieving UMTS vectors """ Summary of my setup: * FreeRadius version4 - Configured, compiled and installed from master Branch * wpa_supplicant version 2.10 * Ubuntu 20.04 LTS Any help would be greatly appreciated. Thank you in advance. Best regards, Mrudul Dighe.

2 1

"switch" statement": would you know a more compact statement?
by Alex Zetaeffesse 26 Apr '23

26 Apr '23

Hi FR people, Is there a more compact way to state what follows? switch { ("%{User-Name}" =~ /(a)tenant101\.bic\.local/) {update control{Proxy-To-Realm := "tenant101"} ("%{User-Name}" =~ /(a)tenant102\.bic\.local/) {update control{Proxy-To-Realm := "tenant102"} ("%{User-Name}" =~ /(a)tenant103\.bic\.local/) {update control{Proxy-To-Realm := "tenant103"} ("%{User-Name}" =~ /(a)tenant104\.bic\.local/) {update control{Proxy-To-Realm := "tenant104"} ("%{User-Name}" =~ /(a)tenant105\.bic\.local/) {update control{Proxy-To-Realm := "tenant105"} ("%{User-Name}" =~ /(a)tenant106\.bic\.local/) {update control{Proxy-To-Realm := "tenant106"} ("%{User-Name}" =~ /(a)tenant107\.bic\.local/) {update control{Proxy-To-Realm := "tenant107"} .... ("%{User-Name}" =~ /(a)tenant170\.bic\.local/) {update control{Proxy-To-Realm := "tenant170"} } Eventually, I may get the value of the Proxy-To-Realm variable, by stripping the 2nd and top level domain and there would not need to repeat the case. Thanks, Alex

2 4

Does eapol_test lie about the data it exchanges with FreeRADIUS?
by Joe Garcia 22 Apr '23

22 Apr '23

I've been debugging an embedded RADIUS client, specifically one that does PEAP auth, using eapol_test, or at least trying to, however I can't see how it could work using the messages it claims to be exchanging with FreeRADIUS. In particular eapol_test claims it replies to the initial identity request with an EAP, not PEAP, message: EAP-PEAP: Encrypting Phase 2 data - hexdump(len=12): 02 a5 00 0c 01 74 65 73 74 33 32 31 when it should be just PEAP, 01 74 65 73 74 33 32 31. Looking at the FreeRADIUS code that handles this (3.2.x, the current version shipping with various Linux distros), src/modules/rlm_eap/types/ rlm_eap_peap:eappeap_process() calls eapmessage_verify() which, for an EAP Response (type = 2) only allows an EAP-TLV and nothing else, in particular not an EAP Identity message as eapol_test claims it's sending. I've verified this by sending the message that eapol_test claims it's sending and getting: eap_peap: Received unexpected EAP-Response, rejecting the session. eap_peap: ERROR: Tunneled data is invalid which is exactly what you'd expect from the code in eapmessage_verify(). So does eapol_test invisibly convert messages to and from EAP/PEAP format when communicating with FreeRADIUS and report the EAP form while using the PEAP form? Further evidence in support of this is what it reports on read of a PEAP Identity Request: EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=1): 01 EAP-PEAP: received Phase 2: code=1 identifier=165 length=5 The first line reports it's read a PEAP message (which is indeed what's being sent) and on the second line it's magically converted itself into an EAP message, which isn't actually sent. Does this mean that eapol_test is an unreliable source of information when it comes to debugging auth issues? JG.

2 2

Freeradius4 DHCPv6 configuration
by Ľudovít Mikula 21 Apr '23

21 Apr '23

Hi experts! I am trying to configure DHCPv6 in freeradius 4. I'd like to be able to assign an IP address from a pool based on Option82 (Remote-Id + Circuit-Id). My problem is that I seem to be unable to find a decent client for testing this setup. There are plenty of test DHCPv4 clients, but not many DHCPv6 clients which also can send custom DHCP options. Any recommendations (ideally linux CLI client/script)? If somebody already did such configuration, I'd be very grateful for any hints. Ludo

2 1

Re: Mailing list is being Spam Filtered by O-365
by White, Daniel E. (GSFC-770.0)[AEGIS] 20 Apr '23

20 Apr '23

OK. I think I understand. Thanks for the details From: Freeradius-Users <freeradius-users-bounces+daniel.e.white=nasa.gov(a)lists.freeradius.org> on behalf of Alan DeKok <aland(a)deployingradius.com> Reply-To: FreeRADIUS ML <freeradius-users(a)lists.freeradius.org> Date: Thursday, April 20, 2023 at 08:20 To: FreeRADIUS ML <freeradius-users(a)lists.freeradius.org> Subject: [BULK] Re: [EXTERNAL] Mailing list is being Spam Filtered by O-365 On Apr 20, 2023, at 8:14 AM, Noel Butler <noel.butler(a)ausics.net<mailto:noel.butler@ausics.net>> wrote: That is not a freeradius.org server that I can see, completely different network even... /var/mail/corp/n/o/e/noel.butler/Maildir/.Lists.FreeRadius/cur# grep "63.88.93.251" * | wc -l 0 Messages in folder 28047 $ host 63.88.93.251 251.93.88.63.in-addr.arpa domain name pointer smtp.e3a.verizonbusiness.com. i.e. someone is routing mail through internal systems, and then complaining that mail is being routed through internal systems. This is our problem, not under our control, and there is nothing we can do about it. CC'd F/R ML since you also posting this issue over there On 20/04/2023 21:47, White, Daniel E. (GSFC-770.0)[AEGIS] via users wrote: How about this: Received: from BL0GCC02FT019.eop-gcc02.prod.protection.outlook.com (2a01:111:f400:7d05::201) by CYXPR09CA0020.outlook.office365.com (2603:10b6:930:d4::27) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6319.25 via Frontend Transport; Thu, 20 Apr 2023 11:27:54 +0000 Authentication-Results: spf=fail (sender IP is 63.88.93.251) <------------------------- smtp.mailfrom=lists.freeradius.org; dkim=none (message not signed) header.d=none;dmarc=fail action=oreject header.from=lists.freeradius.org;compauth=none reason=452 Received-SPF: Fail (protection.outlook.com: domain of lists.freeradius.org <------------------------- does not designate 63.88.93.251 as permitted sender) receiver=protection.outlook.com; client-ip=63.88.93.251; helo=vsmtpx-e100-01.localdomain; -- Regards, Noel Butler

1 0

Re: [EXTERNAL] Re: Mailing list is being Spam Filtered by O-365
by Noel Butler 20 Apr '23

20 Apr '23

That is not a freeradius.org server that I can see, completely different network even... /var/mail/corp/n/o/e/noel.butler/Maildir/.Lists.FreeRadius/cur# grep "63.88.93.251" * | wc -l 0 Messages in folder 28047 CC'd F/R ML since you also posting this issue over there On 20/04/2023 21:47, White, Daniel E. (GSFC-770.0)[AEGIS] via users wrote: > How about this: > > Received: from BL0GCC02FT019.eop-gcc02.prod.protection.outlook.com > (2a01:111:f400:7d05::201) by CYXPR09CA0020.outlook.office365.com > (2603:10b6:930:d4::27) with Microsoft SMTP Server (version=TLS1_2, > cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6319.25 via > Frontend > Transport; Thu, 20 Apr 2023 11:27:54 +0000 > Authentication-Results: spf=fail (sender IP is 63.88.93.251) > <------------------------- > smtp.mailfrom=lists.freeradius.org; dkim=none (message not signed) > header.d=none;dmarc=fail action=oreject > header.from=lists.freeradius.org;compauth=none reason=452 > Received-SPF: Fail (protection.outlook.com: domain of > lists.freeradius.org <------------------------- > does not designate 63.88.93.251 as permitted sender) > receiver=protection.outlook.com; client-ip=63.88.93.251; > helo=vsmtpx-e100-01.localdomain; -- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message.

2 1

Re: Mailing list is being Spam Filtered by O-365
by Noel Butler 20 Apr '23

20 Apr '23

Ohhhhh, same IP again in this message, you are forwarding your mail via verizon business aren't you, no, there is nothing wrong with SA, FR lists nor Harrys setup.... when you forward, you risk breakage, only you can deal with this. On 20/04/2023 22:08, White, Daniel E. (GSFC-770.0)[AEGIS] via users wrote: > Sorrry. > > Mixing up lists > > Received: from BL0GCC02FT027.eop-gcc02.prod.protection.outlook.com > > (2a01:111:f400:7d05::201) by CY4PR09CA0046.outlook.office365.com > > (2603:10b6:903:c0::32) with Microsoft SMTP Server (version=TLS1_2, > > cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6319.25 via > Frontend > > Transport; Thu, 20 Apr 2023 11:50:41 +0000 > > Authentication-Results: spf=fail (sender IP is 63.88.93.251) > ß---------------------------- > > smtp.mailfrom=thelounge.net; dkim=none (message not signed) > ß---------------------------- > > header.d=none;dmarc=none action=none > header.from=thelounge.net;compauth=fail > > reason=001 > > Received-SPF: Fail (protection.outlook.com: domain of thelounge.net > does not > > designate 63.88.93.251 as permitted sender) > receiver=protection.outlook.com; > > client-ip=63.88.93.251; helo=vsmtpx-e100-03.localdomain; > > ______________________________________________________________________________________________ > > Daniel E. White > daniel.e.white(a)nasa.gov > > NASCOM Linux Engineer > NASA Goddard Space Flight Center > Office: (301) 286-6919 > > Mobile: (240) 513-5290 > > From: Reindl Harald <h.reindl(a)thelounge.net> > Organization: the lounge interactive design > Date: Thursday, April 20, 2023 at 07:50 > To: Daniel White <daniel.e.white(a)nasa.gov>, > "users(a)spamassassin.apache.org" <users(a)spamassassin.apache.org> > Subject: Re: [EXTERNAL] Re: Mailing list is being Spam Filtered by > O-365 > > CAUTION: This email originated from outside of NASA. Please take care > when clicking links or opening attachments. Use the "Report Message" > button to report suspicious messages to the NASA SOC. > > Am 20.04.23 um 13:47 schrieb White, Daniel E. (GSFC-770.0)[AEGIS] via > users: > >> How about this: > > how about realize that "@lists.freeradius.org" has nothing to do with > > "@spamassassin.apache.org"? > > Received: from BL0GCC02FT019.eop-gcc02.prod.protection.outlook.com > > (2a01:111:f400:7d05::201) by CYXPR09CA0020.outlook.office365.com > > (2603:10b6:930:d4::27) with Microsoft SMTP Server (version=TLS1_2, > > cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6319.25 via > Frontend > > Transport; Thu, 20 Apr 2023 11:27:54 +0000 > > Authentication-Results: spf=fail (sender IP is 63.88.93.251) > <------------------------- > > smtp.mailfrom=lists.freeradius.org; dkim=none (message not signed) > > header.d=none;dmarc=fail action=oreject > > header.from=lists.freeradius.org;compauth=none reason=452 > > Received-SPF: Fail (protection.outlook.com: domain of > lists.freeradius.org <------------------------- > > does not designate 63.88.93.251 as permitted sender) > > receiver=protection.outlook.com; client-ip=63.88.93.251; > > helo=vsmtpx-e100-01.localdomain; > > From: Reindl Harald <h.reindl(a)thelounge.net> > > Organization: the lounge interactive design > > Date: Thursday, April 20, 2023 at 07:36 > > Subject: [EXTERNAL] Re: Mailing list is being Spam Filtered by O-365 > > Am 20.04.23 um 13:20 schrieb White, Daniel E. (GSFC-770.0)[AEGIS] via > users: > > Is there any chance that SPF and DKIM records could be added to appear > in the headers ? > what makes you believe that SPF is part of mail-headers? > dig +short TXT spamassassin.apache.org; > > "spf2.0/pra ?all" > > "v=spf1 include:_spf.apache.org -all" > > Received-SPF: Pass (mailfrom) identity=mailfrom; > > client-ip=3.227.148.255; helo=mxout1-ec2-va.apache.org -- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message.

1 0

Mailing list is being Spam Filtered by O-365
by White, Daniel E. (GSFC-770.0)[AEGIS] 20 Apr '23

20 Apr '23

Is there any chance that SPF and DKIM records could be added to appear in the headers ? The gubba-mint folks are getting extremely medieval about email security.

2 1

custom attribute to check NAS
by mohamed almeshal 20 Apr '23

20 Apr '23

dear saver , I'm working on custom that in radcheck table that check if the user is come from it's own NAS but without any Luck. my question is how I can add custom attribute and let it's work like other implmented attribute mohammed

2 1

References to TLS-Client-Cert-Common-Name
by Çağlar Karahan 19 Apr '23

19 Apr '23

Hi, I am using the TLS-Client-Cert-Common-Name attribute to get client certificate common name value and use it in the authorize section. While it does read the issue attributes from CA that comes with it, it ignores the client attribute. How can I get the value of a client certificate? *Here is the debug output:* *Fri Apr 7 09:03:13 2023 : Debug: (5) EAP-Type = TLSFri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Serial := "33ffb07c337ec3bc"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Expiration := "231109075300Z"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Valid-Since := "221109075300Z"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Subject := "/CN=cacert"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Issuer := "/CN=cacert"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Common-Name := "cacert"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:TRUE"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "FA:CF:53:D7:B0:54:5A:DA:12:A0:51:D4:C1:2B:10:C3:2F:C2:17:6E"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:FA:CF:53:D7:B0:54:5A:DA:12:A0:51:D4:C1:2B:10:C3:2F:C2:17:6E\n"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Serial := "55deef44a81709aa"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Expiration := "231109075300Z"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Valid-Since := "221109075600Z"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Subject := "/CN=clientcert/emailAddress=client(a)example.com/serialNumber=ababab0123456 <http://client@example.com/serialNumber=ababab0123456>"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Issuer := "/CN=cacert"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Common-Name := "clientcert"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Subject-Alt-Name-Email := "clientcert(a)example.com <clientcert(a)example.com>"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-Subject-Alt-Name-Dns := "clientcert.copy.com.example.com <http://clientcert.copy.com.example.com>"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "AA:57:43:AC:9D:32:95:F8:DB:E5:4B:7A:8E:0F:D3:5C:52:42:14:EC"Fri Apr 7 09:03:13 2023 : Debug: (5) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:FA:CF:53:D7:B0:54:5A:DA:12:A0:51:D4:C1:2B:10:C3:2F:C2:17:6E\n"Fri Apr 7 09:03:13 2023 : WARNING: (5) Outer and inner identities are the same. User privacy is compromised.Fri Apr 7 09:03:13 2023 : Debug: (5) server eap-tls-check {Fri Apr 7 09:03:13 2023 : Debug: (5) session-state: No cached attributesFri Apr 7 09:03:13 2023 : Debug: (5) # Executing section authorize from file /opt/freeradius/etc/raddb/sites-enabled/inner-tunnelFri Apr 7 09:03:13 2023 : Debug: (5) authorize {Fri Apr 7 09:03:13 2023 : Debug: (5) if ("%{sql:select assignmentvalue from radeaptlsvlan where (instr('%{TLS-Client-Cert-Common-Name}', assignmentvalue) > 0") {Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Reserved connection (6)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Released connection (6)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Reserved connection (2)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Released connection (2)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Reserved connection (3)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Released connection (3)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Reserved connection (4)Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Released connection (4)Fri Apr 7 09:03:13 2023 : Debug: %{User-Name}Fri Apr 7 09:03:13 2023 : Debug: Parsed xlat tree:Fri Apr 7 09:03:13 2023 : Debug: attribute --> User-NameFri Apr 7 09:03:13 2023 : Debug: (5) EXPAND %{User-Name}Fri Apr 7 09:03:13 2023 : Debug: (5) --> caglarFri Apr 7 09:03:13 2023 : Debug: (5) SQL-User-Name set to 'caglar'Fri Apr 7 09:03:13 2023 : Debug: rlm_sql (sql): Reserved connection (0)Fri Apr 7 09:03:13 2023 : Debug: (5) Executing select query: select assignmentvalue from radeaptlsvlan where (instr('cacert', assignmentvalue) > 0)* Regards, Caglar

3 4

subsctring from attribute
by Anatoliy 18 Apr '23

18 Apr '23

HI all , How i can get subsctring from attribute ? For example &Any-attr = "test:pass" but in DB I only want put "pass" part Attribut always in default:XXX

2 1

module coa_relay
by Nick Harney 16 Apr '23

16 Apr '23

Hi there, Anyone have any experience implementing the module coa_relay? I have FreeRadius V3.0 installed and I am trying to send COA disconnect requests from a program to each NAS (Cambium access points). I currently able to manually send COA disconnects using the radclient command directly to the IP address of each AP. I would like to use the COA relay module so that I can run a script to automatically disconnect a user based on mac address, and send the COA disconnect request to the appropriate access points (NAS). I enabled the module, however I am getting the following error when starting the FreeRadius server: Failed to parse “detail_coa.accounting” I have the detail module enabled in sites-available/. Any ideas? Thanks Nick Harney Nickologic LLC PO Box 164, Sunset Beach, CA 90742

3 5

PacketFence -FreeRADIUS - Azure AD - No Auth-Type found
by P.Thirunavukkarasu 07 Apr '23

07 Apr '23

Hi Team, *Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject)* EAP: TTLS-PAP How to fix this? Any help is greatly appreciated. Regards, Thirunavukkarasu

3 3

how to map attribute for EAP-SIM/EAP-AKA on Freeradius version4?
by MJ Tan 06 Apr '23

06 Apr '23

Hi Experts, I am testing EAP-SIM/EAP-AKA on Freeradius version-4 by reading the IMSI, RAND, SRAND etc. from the rlm_passwd module password file which was working in Version 3, but I am stuck with some attribute errors in version 4. I believe that Version-4 has changed the attribute on EAP-SIM/EAP-AKA, however, I have no idea how to map the attribute to make it works like version-3. I was trying to compare the dictionary file attribute between V3 and V4 but still confusing. here is a passwd format in v3 --> *"format = "*User-Name:EAP-Sim-RAND1:EAP-Sim-SRES1:EAP-Sim-KC1:EAP-Sim-RAND2:EAP-Sim-SRES2:EAP-Sim-KC2:EAP-Sim-RAND3:EAP-Sim-SRES3:EAP-Sim-KC3:"* *Can anyone advise the passwd format in version4?* ############################################# (0) default { (0) Received Access-Request ID 248 from 10.232.128.52:59140 to 10.200.11.154:1812 via ens160 (0) User-Name = "1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (0) NAS-IP-Address = 10.232.128.52 (0) NAS-Port = 0 (0) NAS-Identifier = "10.232.128.52" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "7e95f933088f" (0) Called-Station-Id = "f05c19ca427c" (0) Service-Type = Framed-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x02010038013135323530313631303538393738323540776c616e2e6d6e633030312e6d63633532352e336770706e6574776f726b2e6f7267 (0) Vendor-Specific.Aruba.Essid-Name = "airplay_sim" (0) Vendor-Specific.Aruba.Location-Id = "AP325-SG-Home-1" (0) Vendor-Specific.Aruba.AP-Group = "SG_SEATH_AOS10" (0) Vendor-Specific.Aruba.AP-MAC-Address = "f05c19ca427c" (0) Vendor-Specific.Aruba.Device-MAC-Address = "7e95f933088f" (0) Message-Authenticator = 0x3fb0a416e7a90a56e60e2f4ab6a93933 (0) Packet-Type = Access-Request (0) Running 'recv Access-Request' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (0) recv Access-Request { (0) chap (noop) (0) mschap (noop) (0) digest (noop) *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND1'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES1'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC1'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND2'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES2'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC2'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND3'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES3'* *(0) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC3'* (0) sim_files (ok) (0) eap - Peer sent EAP Response (code 2) ID 1 length 56 (0) eap - Peer sent EAP-Identity. Returning 'ok' so we can short-circuit the rest of authorize (0) eap - Setting &control.Auth-Type = eap (0) eap (ok) (0) } # recv Access-Request (ok) (0) default - Running 'authenticate eap' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (0) default - authenticate eap { (0) eap - New EAP session started (0) eap - Peer sent packet with EAP method Identity (1) (0) eap - Calling submodule eap_sim (0) eap - subrequest { (0.0) eap-sim - Stripping 'hint' byte from Permanent-Identity (0.0) eap-sim - &session-state.Permanent-Identity = " 525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (0.0) eap-sim - recv Identity-Response { (0.0) eap-sim - | debug_attr *(0.0) eap-sim - ERROR: Invalid input: Missing attribute reference* (0.0) eap-sim - | %(debug_attr:{&session-state.}) (0.0) eap-sim - if (!&session-state.Tmp-String-0) { (0.0) eap-sim - &reply.Any-ID-Req := yes (0.0) eap-sim - &session-state.Tmp-String-0 := yes (0.0) eap-sim - } # if (!&session-state.Tmp-String-0) (noop) (0.0) eap-sim - ok (ok) (0.0) eap-sim - } # recv Identity-Response (ok) (0.0) eap-sim - New EAP-SIM session (0.0) eap-sim - Previous section added &reply.Any-ID-Req = yes, will request additional identity (0.0) eap-sim - Changed state INIT -> SIM-START (0.0) eap-sim - send Identity-Request { (0.0) eap-sim - ok (ok) (0.0) eap-sim - } # send Identity-Request (ok) (0.0) eap.sim - eap-sim (handled) (0.0) eap.sim - Encoding attributes (0.0) eap.sim - Version-List = 1 (0.0) eap.sim - Any-ID-Req = yes (0.0) eap.sim - Subtype = SIM-Start (0.0) eap.sim (handled) (0) eap - subrequest - Resuming execution (0) eap - } # subrequest (noop) (0) eap - Sending EAP Request (code 1) ID 220 length 20 (0) default - eap (handled) (0) default - } # authenticate eap (handled) (0) default - Running 'send Access-Challenge' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (0) default - send Access-Challenge { (0) attr_filter.access_challenge - | User-Name (0) attr_filter.access_challenge - | %{User-Name} (0) attr_filter.access_challenge - | --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (0) attr_filter.access_challenge - --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (0) attr_filter.access_challenge - Matched entry DEFAULT at line 12 (0) default - attr_filter.access_challenge (updated) (0) default - handled (handled) (0) default - } # send Access-Challenge (handled) (0) default (ok) (0) } # default (ok) (0) Done request (0) Sending Access-Challenge ID 248 from 0.0.0.0/0:1812 to 10.232.128.52:59140 length 78 via socket radius_udp server * port 1812 (0) EAP-Message = 0x01dc0014120a00000d0100000f02000200010000 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x0101b1000f8fb7a6b591b1d5c40e716b (0) Packet-Type = Access-Challenge (0) Finished request proto_radius_udp - cleaning up request in 5.000000s proto_radius_udp - Received Access-Request ID 249 length 376 radius_udp server * port 1812 (1) default { (1) Received Access-Request ID 249 from 10.232.128.52:59140 to 10.200.11.154:1812 via ens160 (1) User-Name = "1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (1) NAS-IP-Address = 10.232.128.52 (1) NAS-Port = 0 (1) NAS-Identifier = "10.232.128.52" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "7e95f933088f" (1) Called-Station-Id = "f05c19ca427c" (1) Service-Type = Framed-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x02dc0058120a00000e0e00333135323530313631303538393738323540776c616e2e6d6e633030312e6d63633532352e336770706e6574776f726b2e6f72670010010001070500009f6d20ac890376a2b4f9d5ff806975c1 (1) State = 0x0101b1000f8fb7a6b591b1d5c40e716b (1) Vendor-Specific.Aruba.Essid-Name = "airplay_sim" (1) Vendor-Specific.Aruba.Location-Id = "AP325-SG-Home-1" (1) Vendor-Specific.Aruba.AP-Group = "SG_SEATH_AOS10" (1) Vendor-Specific.Aruba.AP-MAC-Address = "f05c19ca427c" (1) Vendor-Specific.Aruba.Device-MAC-Address = "7e95f933088f" (1) Message-Authenticator = 0xf44ed74a30d348832167c0fa3992617e (1) Packet-Type = Access-Request (1) Running 'recv Access-Request' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (1) recv Access-Request { (1) chap (noop) (1) mschap (noop) (1) digest (noop) *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND1'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES1'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC1'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND2'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES2'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC2'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND3'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES3'* *(1) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC3'* (1) sim_files (ok) (1) eap - Peer sent EAP Response (code 2) ID 220 length 88 (1) eap - Continuing on-going EAP conversation (1) eap - Setting &control.Auth-Type = eap (1) eap (updated) (1) policy expiration { (1) if (&control.Expiration) { (1) ... (1) } (1) } # policy expiration (updated) (1) logintime (noop) (1) pap (noop) (1) } # recv Access-Request (updated) (1) default - Running 'authenticate eap' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (1) default - authenticate eap { (1) eap - Continuing EAP session (1) eap - Peer sent packet with EAP method SIM (18) (1) eap - Calling submodule eap_sim (1) eap - subrequest { (1.0) eap.sim - Decoded attributes (1.0) eap.sim - EAP-Identity = " 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (1.0) eap.sim - EAP-Type = SIM (1.0) eap.sim - Identity = " 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (1.0) eap.sim - Selected-Version = 1 (1.0) eap.sim - Nonce-MT = 0x9f6d20ac890376a2b4f9d5ff806975c1 (1.0) eap.sim - Subtype = SIM-Start (1.0) eap.sim - Received EAP-Response/SIM-Start (1.0) eap-sim - Stripping 'hint' byte from Permanent-Identity (1.0) eap-sim - &session-state.Permanent-Identity = " 525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (1.0) eap-sim - recv Identity-Response { (1.0) eap-sim - | debug_attr *(1.0) eap-sim - ERROR: Invalid input: Missing attribute reference* (1.0) eap-sim - | %(debug_attr:{&session-state.}) (1.0) eap-sim - if (!&session-state.Tmp-String-0) { (1.0) eap-sim - ... (1.0) eap-sim - } (1.0) eap-sim - ok (ok) (1.0) eap-sim - } # recv Identity-Response (ok) (1.0) eap-sim - Changed state SIM-START -> SIM-CHALLENGE (1.0) eap-sim - send Challenge-Request { (1.0) eap-sim - &control.SIM-Ki := 0x465b5ce8b199b49faa5f0a2ee238a6bc (1.0) eap-sim - &control.SIM-Opc := 0xcd63cb71954a9f4e48a5994e37a02baf (1.0) eap-sim - &control.SIM-SQN := 3 (1.0) eap-sim - &reply.Encr-Data.Next-Reauth-Id := (1.0) eap-sim - &reply.Encr-Data.Next-Pseudonym := (1.0) eap-sim - ok (ok) (1.0) eap-sim - } # send Challenge-Request (ok) (1.0) eap-sim - Acquiring GSM vector(s) (1.0) eap-sim - GSM vector[0] (1.0) eap-sim - KC : 0xaa398ce1e9795b59 (1.0) eap-sim - RAND : 0xe72d740b34ec86183926485feda798d2 (1.0) eap-sim - SRES : 0x1a3b217a (1.0) eap-sim - GSM vector[1] (1.0) eap-sim - KC : 0xd8a60eaf3b6dc607 (1.0) eap-sim - RAND : 0x3358a1eefe5cef50d636c4619decb183 (1.0) eap-sim - SRES : 0x178e177d (1.0) eap-sim - GSM vector[2] (1.0) eap-sim - KC : 0xc1470a0aca5a6b47 (1.0) eap-sim - RAND : 0x2e911af2fe6c7dc599a031b92b2bd466 (1.0) eap-sim - SRES : 0x20aa55da (1.0) eap-sim - store session { (1.0) eap_sim_cache - | eap-aka-sim.Session-ID (1.0) eap_sim_cache - | %{eap-aka-sim.Session-ID} (1.0) eap_sim_cache - | --> 0x3578543934775962337a6c466c5569 (1.0) eap_sim_cache - --> 0x3578543934775962337a6c466c5569 (1.0) eap_sim_cache - No cache entry found for "0x3578543934775962337a6c466c5569" (1.0) eap_sim_cache - Creating new cache entry (1.0) eap_sim_cache - &session-State.Encr-Data.Counter := &session-State.Encr-Data.Counter -> 0 (1.0) eap_sim_cache - Committed entry, TTL 15 seconds (1.0) eap-sim - eap_sim_cache (updated) (1.0) eap-sim - } # store session (updated) (1.0) eap.sim - eap-sim (handled) (1.0) eap.sim - Sending EAP-Request/SIM-Challenge (1.0) eap.sim - Encoding attributes (1.0) eap.sim - Encr-Data.Next-Reauth-ID = "5xT94wYb3zlFlUi" (1.0) eap.sim - Encr-Data.Next-Pseudonym = "3NIu7O8CcaYW8Gy" (1.0) eap.sim - RAND = 0xe72d740b34ec86183926485feda798d2 (1.0) eap.sim - RAND = 0x3358a1eefe5cef50d636c4619decb183 (1.0) eap.sim - RAND = 0x2e911af2fe6c7dc599a031b92b2bd466 (1.0) eap.sim - MAC = 0x (1.0) eap.sim - Subtype = SIM-Challenge (1.0) eap.sim (handled) (1) eap - subrequest - Resuming execution (1) eap - } # subrequest (noop) (1) eap - Sending EAP Request (code 1) ID 221 length 152 (1) default - eap (handled) (1) default - } # authenticate eap (handled) (1) default - Running 'send Access-Challenge' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (1) default - send Access-Challenge { (1) attr_filter.access_challenge - | User-Name (1) attr_filter.access_challenge - | %{User-Name} (1) attr_filter.access_challenge - | --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (1) attr_filter.access_challenge - --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (1) attr_filter.access_challenge - Matched entry DEFAULT at line 12 (1) default - attr_filter.access_challenge (updated) (1) default - handled (handled) (1) default - } # send Access-Challenge (handled) (1) default (ok) (1) } # default (ok) (1) Done request (1) Sending Access-Challenge ID 249 from 0.0.0.0/0:1812 to 10.232.128.52:59140 length 210 via socket radius_udp server * port 1812 (1) EAP-Message = 0x01dd0098120b00000b0500009f3cb5a97002c186c2ea1dbb34f1f55d010d0000e72d740b34ec86183926485feda798d23358a1eefe5cef50d636c4619decb1832e911af2fe6c7dc599a031b92b2bd46681050000b682371842b5bdacd12a69d27c43f143820d0000d96237c725f160660f4670be81b1a2a8a59335517b52b39b5ed0dcdcd185e11d02a9a7a8d3f12b82d56234aba8d5e0f1 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x0203b10097741f88b591b1d5c40e716b (1) Packet-Type = Access-Challenge (1) Finished request proto_radius_udp - cleaning up request in 5.000000s proto_radius_udp - Received Access-Request ID 250 length 300 radius_udp server * port 1812 (2) default { (2) Received Access-Request ID 250 from 10.232.128.52:59140 to 10.200.11.154:1812 via ens160 (2) User-Name = "1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (2) NAS-IP-Address = 10.232.128.52 (2) NAS-Port = 0 (2) NAS-Identifier = "10.232.128.52" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "7e95f933088f" (2) Called-Station-Id = "f05c19ca427c" (2) Service-Type = Framed-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x02dd000c120e000016010000 (2) State = 0x0203b10097741f88b591b1d5c40e716b (2) Vendor-Specific.Aruba.Essid-Name = "airplay_sim" (2) Vendor-Specific.Aruba.Location-Id = "AP325-SG-Home-1" (2) Vendor-Specific.Aruba.AP-Group = "SG_SEATH_AOS10" (2) Vendor-Specific.Aruba.AP-MAC-Address = "f05c19ca427c" (2) Vendor-Specific.Aruba.Device-MAC-Address = "7e95f933088f" (2) Message-Authenticator = 0xf261d6f34752fc6d83c80cd10389650c (2) Packet-Type = Access-Request (2) Running 'recv Access-Request' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (2) recv Access-Request { (2) chap (noop) (2) mschap (noop) (2) digest (noop) *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND1'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES1'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC1'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND2'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES2'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC2'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-RAND3'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-SRES3'* *(2) sim_files - ERROR: Ignoring unknown attribute 'EAP-Sim-KC3'* (2) sim_files (ok) (2) eap - Peer sent EAP Response (code 2) ID 221 length 12 (2) eap - Continuing on-going EAP conversation (2) eap - Setting &control.Auth-Type = eap (2) eap (updated) (2) policy expiration { (2) if (&control.Expiration) { (2) ... (2) } (2) } # policy expiration (updated) (2) logintime (noop) (2) pap (noop) (2) } # recv Access-Request (updated) (2) default - Running 'authenticate eap' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (2) default - authenticate eap { (2) eap - Continuing EAP session (2) eap - Peer sent packet with EAP method SIM (18) (2) eap - Calling submodule eap_sim (2) eap - subrequest { (2.0) eap.sim - Decoded attributes (2.0) eap.sim - EAP-Identity = " 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org" (2.0) eap.sim - EAP-Type = SIM (2.0) eap.sim - Client-Error-Code = Unable-To-Process-Packet (2.0) eap.sim - Subtype = AKA-SIM-Client-Error (2.0) eap.sim - Received EAP-Response/AKA-SIM-Client-Error *(2.0) eap-sim - ERROR: Peer rejected request with error: 0 (Unable-To-Process-Packet)* (2.0) eap-sim - clear session { (2.0) eap_sim_cache - | eap-aka-sim.Session-ID (2.0) eap_sim_cache - | %{eap-aka-sim.Session-ID} (2.0) eap_sim_cache - | --> 0x3578543934775962337a6c466c5569 (2.0) eap_sim_cache - --> 0x3578543934775962337a6c466c5569 (2.0) eap_sim_cache - Found entry for "0x3578543934775962337a6c466c5569" (2.0) eap_sim_cache - Expiring cache entry (2.0) eap-sim - eap_sim_cache (ok) (2.0) eap-sim - } # clear session (ok) (2.0) eap-sim - Changed state SIM-CHALLENGE -> EAP-FAILURE (2.0) eap-sim - Sending EAP-Failure (2.0) eap.sim - eap-sim (reject) (2.0) eap.sim (reject) (2) eap - subrequest - Resuming execution (2) eap - } # subrequest (noop) (2) eap - Sending EAP Failure (code 4) ID 221 length 4 (2) eap - Cleaning up EAP session (2) default - eap (reject) (2) default - } # authenticate eap (reject) (2) default - Failed to authenticate the user (2) default - Running 'send Access-Reject' from file /usr/local/etc/radv4/etc/raddb/sites-enabled/test (2) default - send Access-Reject { (2) attr_filter.access_reject - | User-Name (2) attr_filter.access_reject - | %{User-Name} (2) attr_filter.access_reject - | --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (2) attr_filter.access_reject - --> 1525016105897825(a)wlan.mnc001.mcc525.3gppnetwork.org (2) attr_filter.access_reject - Matched entry DEFAULT at line 11 (2) default - attr_filter.access_reject (updated) (2) default - eap (noop) (2) default - policy remove_reply_message_if_eap { (2) default - if (&reply.EAP-Message && &reply.Reply-Message) { (2) default - ... (2) default - } (2) default - else { (2) default - noop (noop) (2) default - } # else (noop) (2) default - } # policy remove_reply_message_if_eap (noop) (2) delay_reject - | (null) (2) delay_reject - | reply.FreeRADIUS-Response-Delay (2) delay_reject - | %{reply.FreeRADIUS-Response-Delay} (2) delay_reject - | --> (2) delay_reject - | %{%{reply.FreeRADIUS-Response-Delay}:-1} (2) delay_reject - | --> 1 (2) delay_reject - Delaying request by ~0.991348969s (2) delay_reject - Delay done (2) delay_reject - delay_reject - Resuming execution (2) default - delay_reject (ok) (2) default - } # send Access-Reject (updated) (2) default (ok) (2) } # default (ok) (2) Done request (2) Sending Access-Reject ID 250 from 0.0.0.0/0:1812 to 10.232.128.52:59140 length 44 via socket radius_udp server * port 1812 (2) EAP-Message = 0x04dd0004 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) Packet-Type = Access-Reject (2) Finished request proto_radius_udp - cleaning up request in 5.000000s ############################################# *-MJ*

2 1

check user device mac address without doing mac-auth
by Eby Mani 05 Apr '23

05 Apr '23

Is it possible to check mac address of user device when doing standard 802.1x authentication and allow access without doing mac-auth + 802.1x ?. The requirement is to restrict users from connecting from other devices(say BYOD) other than IT approved device allocated to user. When using mac-auth-802.1x, server have no way of knowing which device the user is mapped to and user can connect from any authorised device in the list. Questions, 1, Is there a guide on how to achieve this with mysql integration ?. 2a, Is it recommended to add new columns to include mac-addr in radcheck table ?. 2b, If so, will freeradius automatically check new columns values and do access-accept/reject automatically ?. Any hints will be helpful. Thanks,

2 10

tacacs+ and mysql
by Igor Smitran 05 Apr '23

05 Apr '23

In master (v4) branch there is a tacacs+ setup in sites-available. Do you have any examples of tacacs+ with users in mysql and authorization for some commands (global show .* conf t/show .*, exec etc.) per group, sql queries etc.? Thank you,

2 1

duplicate the username for SQL-username
by mohamed almeshal 05 Apr '23

05 Apr '23

dear savers ... I'm building cloud based freeradius services and some of users ask for username to thier customers that found in system before , so I wonder if there any producer that can be implemnted to let the username duplicate without any issue for freeradius core . your's mohammed

2 1

Request for assistance: FreeRadius configuration for split accounting of users into groups
by Ahmad Gharib 04 Apr '23

04 Apr '23

Dear FreeRadius Mailing List, I hope this email finds you well. I am reaching out to request assistance with a technical issue that my team and I have been facing while configuring FreeRadius for our OpenVPN setup. We have configured OpenVPN with the OpenVPN Radius Plugin for authentication and accounting, and we have connected it to a FreeRadius server. Our aim is to split users into two groups, Premium and Limited, and configure bandwidth throttling for them depending on their group. For Premium users, we would like to provide unlimited bandwidth without any throttling. However, for Limited users, we want to provide free 1GB/day and then throttle their connection if they exceed the limit. To achieve this, we have configured the PERL module as an External Scripting functionality to check daily consumption and other metrics of the user in "Acct-Interim-Updates." We use this functionality to control the user's group by switching them from Premium to Limited and vice versa. Additionally, we apply throttling to the OpenVPN server using tc. We also allow users to purchase tokens to top up their allowed bandwidth. If a user exceeds their daily limit, their purchased credits allow them to continue their internet usage without any additional throttling. However, we are facing issues with the accounting per user group. Specifically, we have noticed that if a user is now in the Limited group and consuming traffic on a throttled connection, the daily_consumption metric continues to add up, even if they have already exceeded their allowed daily bandwidth. For example, let's say a user has consumed 0.5 GB in addition to their allowed 1 GB per day, which makes their total consumption 1.5 GB/day. If the user then purchases extra credits worth 0.2 GB, their total allowed consumption would be 1.2. GB/Day, however, their actual. total daily consumption would still be 1.5 GB/day, which renders the user in the same `limited` group and breaks the accounting purposes. To address this issue, we would like to have split accounting for each group. In other words, once a user is throttled, we want to ignore the bandwidth recorded and only calculate the bandwidth consumed during their Premium group connection. It is important to note that the `acctinputoctets` and `acctoutputoctets` values are pushed by OpenVPN-Radius Plugin as total incremented values of the connection , and not interval values during each `Acct-Interim-Updates`. We would greatly appreciate any assistance or guidance on how to achieve this goal. Thank you in advance for your time and expertise. Best regards, Ahmad R. Gharib -- ~ ~ *Ahmad R. Gharib* *Linux Systems Administrator at Securealm SARL* *Mobile: +961 71953385*

2 2

Different authentication for Multiple SSIDs
by ChristopherNeufer Neufer 04 Apr '23

04 Apr '23

Hello Together, right now im trying to configure a Radiusserver with two different authentication mehtods. We have two SSIDs SSID1: WLAN-TLS SSID2: WLAN-TLS-MSCHAPv2 For SSID1 only EAP-TLS should work.For SSID2, EAP-TLS and MSCHAPv2 should work. Im no sure, how to get this working. This is my sites-enabled config: server default { listen { type = auth ipv4addr = 192.168.0.2 port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } authorize { rewrite_called_station_id if (Called-Station-SSID == "WLAN-TLS") { eap { ok = return } } preprocess mschap suffix files Autz-Type New-TLS-Connection { ok } } authenticate { Auth-Type MS-CHAP { mschap } mschap eap } } I played around a bit with "Called-Station-SSID" but i could not get it work. Would be nice if somene can provide me a hint :P Kind regardsChris

2 1

Computer/Machine Authentication almost working..
by Tim ODriscoll 04 Apr '23

04 Apr '23

Dear All, I'm nearly there (I think) getting machine auth working via ntlm_auth, but after following the documentation from both FR and the Samba Wiki, ntlm_auth isn't authenticating and giving me an error: (7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' ntlm_auth is able to strip out the machine name correctly: (7) mschap: EXPAND --username=%{mschap:User-Name} (7) mschap: --> --username=SL-6S4BBS3$ wbinfo tells me it's connected OK: # wbinfo -t checking the trust secret for domain MYDOMAIN via RPC calls succeeded # wbinfo -p Ping to winbindd succeeded The winbindd_privilege directory is correct: # ls -ld /var/lib/samba/winbindd_privileged/ drwxr-x---+ 2 root radiusd 18 Apr 1 21:39 /var/lib/samba/winbindd_privileged/ Samba's config has this on the member (FR) server and all the DCs: ntlm auth = mschapv2-and-ntlmv2-only I understand ntlm_auth isn't supposed to be used on the CLI, so how can I test any further? Many thanks, Tim Full logs: FreeRADIUS Version 3.2.2 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/totp including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/ad_machine_auth including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.4.0/24 { ipaddr = 192.168.4.0/24 require_message_authenticator = no secret = <<< secret >>> shortname = "wifi_APs" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "ldaps://DC01.MYDOMAIN.co.uk" identity = "cn=MYADMIN,cn=users,dc=MYDOMAIN,dc=co,dc=uk" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=group)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=MYDOMAIN,dc=co,dc=uk" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/ssl/certs/dc01.pem" start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_totp # Loading module "totp" from file /etc/raddb/mods-enabled/totp instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/coa # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20602 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 60410 Listening on proxy address :: port 59954 Ready to process requests (0) Received Access-Request Id 202 from 192.168.4.183:40744 to 192.168.15.22:1812 length 250 (0) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (0) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) NAS-Port = 1 (0) Calling-Station-Id = "28-6B-35-4F-46-BF" (0) Connect-Info = "CONNECT 54Mbps 802.11a" (0) Acct-Session-Id = "7AF5DECDA3D1020E" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02e0002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (0) Message-Authenticator = 0x45339dcf5ff0be628a0d52434270ef14 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 224 length 41 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 225 length 6 (0) eap: EAP session adding &reply:State = 0xa2f91851a21801a2 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 202 from 192.168.15.22:1812 to 192.168.4.183:40744 length 64 (0) EAP-Message = 0x01e100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa2f91851a21801a2ba9496e09aa2d64c (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 203 from 192.168.4.183:40744 to 192.168.15.22:1812 length 490 (1) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (1) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) NAS-Port = 1 (1) Calling-Station-Id = "28-6B-35-4F-46-BF" (1) Connect-Info = "CONNECT 54Mbps 802.11a" (1) Acct-Session-Id = "7AF5DECDA3D1020E" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02e101051980000000fb16030100f6010000f2030396d97a4ecef4aba29f04911ed89253b0309385bb706769b1b81e8d30403380c920e9cc5ced53531b828296dedf767263c450c57d582a2d2d78ff63c95766109325002813021301c02cc02bc030c02fc024c023c028c027c00ac009c014c013009d009c003d003c0035002f01000081000500050100000000002b0009080304030303020301000d001a001808040805080604010501020104030503020302020601060300230000000a00080006001d00170018003300260024001d00205a3b11f6621d1435940295fc49f8d11db7857a69b5c45afa0340438e3bbb040b0031000000170000ff01000100002d00020101 (1) State = 0xa2f91851a21801a2ba9496e09aa2d64c (1) Message-Authenticator = 0x30f9339b97df8bdf7f26f3b7d10837b2 (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 225 length 261 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xa2f91851a21801a2 (1) eap: Finished EAP session with state 0xa2f91851a21801a2 (1) eap: Previous EAP request found for state 0xa2f91851a21801a2, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) EAP Peer says that the final record size will be 251 bytes (1) eap_peap: (TLS) EAP Got all data (251 bytes) (1) eap_peap: (TLS) Handshake state - before SSL initialization (1) eap_peap: (TLS) Handshake state - Server before SSL initialization (1) eap_peap: (TLS) Handshake state - Server before SSL initialization (1) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_peap: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 226 length 1004 (1) eap: EAP session adding &reply:State = 0xa2f91851a31b01a2 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 203 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa2f91851a31b01a2ba9496e09aa2d64c (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 204 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233 (2) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (2) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) NAS-Port = 1 (2) Calling-Station-Id = "28-6B-35-4F-46-BF" (2) Connect-Info = "CONNECT 54Mbps 802.11a" (2) Acct-Session-Id = "7AF5DECDA3D1020E" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x02e200061900 (2) State = 0xa2f91851a31b01a2ba9496e09aa2d64c (2) Message-Authenticator = 0xfea378d7277662d4cec6efee65f205db (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 226 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa2f91851a31b01a2 (2) eap: Finished EAP session with state 0xa2f91851a31b01a2 (2) eap: Previous EAP request found for state 0xa2f91851a31b01a2, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 227 length 1000 (2) eap: EAP session adding &reply:State = 0xa2f91851a01a01a2 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 204 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1064 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa2f91851a01a01a2ba9496e09aa2d64c (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 205 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233 (3) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (3) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) NAS-Port = 1 (3) Calling-Station-Id = "28-6B-35-4F-46-BF" (3) Connect-Info = "CONNECT 54Mbps 802.11a" (3) Acct-Session-Id = "7AF5DECDA3D1020E" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x02e300061900 (3) State = 0xa2f91851a01a01a2ba9496e09aa2d64c (3) Message-Authenticator = 0xb714bedc489537ab5e91cc8e6bad6172 (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 227 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xa2f91851a01a01a2 (3) eap: Finished EAP session with state 0xa2f91851a01a01a2 (3) eap: Previous EAP request found for state 0xa2f91851a01a01a2, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 228 length 804 (3) eap: EAP session adding &reply:State = 0xa2f91851a11d01a2 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 205 from 192.168.15.22:1812 to 192.168.4.183:40744 length 868 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xa2f91851a11d01a2ba9496e09aa2d64c (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 206 from 192.168.4.183:40744 to 192.168.15.22:1812 length 363 (4) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (4) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) NAS-Port = 1 (4) Calling-Station-Id = "28-6B-35-4F-46-BF" (4) Connect-Info = "CONNECT 54Mbps 802.11a" (4) Acct-Session-Id = "7AF5DECDA3D1020E" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x02e4008819800000007e1603030046100000424104fc700b1b8bfa32368426118e9a80c3f39ff815218590aed58e2c75581537f83192c25765f7180aee560c91d163e877dc0c291383f8b81220fe3e6f7575208c681403030001011603030028000000000000000018c81880c82d0c93acf0f409f08a98d6f7cdb13357292280e9ea23dce17c1c1f (4) State = 0xa2f91851a11d01a2ba9496e09aa2d64c (4) Message-Authenticator = 0xf11fb09ed5dab5550ed5f5cb3162d479 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 228 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xa2f91851a11d01a2 (4) eap: Finished EAP session with state 0xa2f91851a11d01a2 (4) eap: Previous EAP request found for state 0xa2f91851a11d01a2, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes (4) eap_peap: (TLS) EAP Got all data (126 bytes) (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished (4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished (4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully (4) eap_peap: (TLS) Connection Established (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_peap: TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 229 length 57 (4) eap: EAP session adding &reply:State = 0xa2f91851a61c01a2 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 206 from 192.168.15.22:1812 to 192.168.4.183:40744 length 115 (4) EAP-Message = 0x01e50039190014030300010116030300280292373b404e0822b6ddf83ac8081a30eb64150d72404bab3ca5526bb2d137e1875654b13c8fff88 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xa2f91851a61c01a2ba9496e09aa2d64c (4) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 202 with timestamp +13 due to cleanup_delay was reached (1) Cleaning up request packet ID 203 with timestamp +13 due to cleanup_delay was reached (2) Cleaning up request packet ID 204 with timestamp +13 due to cleanup_delay was reached (3) Cleaning up request packet ID 205 with timestamp +13 due to cleanup_delay was reached (4) Cleaning up request packet ID 206 with timestamp +13 due to cleanup_delay was reached Ready to process requests (5) Received Access-Request Id 207 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233 (5) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (5) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) NAS-Port = 1 (5) Calling-Station-Id = "28-6B-35-4F-46-BF" (5) Connect-Info = "CONNECT 54Mbps 802.11a" (5) Acct-Session-Id = "7AF5DECDA3D1020E" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x02e500061900 (5) State = 0xa2f91851a61c01a2ba9496e09aa2d64c (5) Message-Authenticator = 0x1d3e1b0836f981270aa2af2af7314781 (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 229 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xa2f91851a61c01a2 (5) eap: Finished EAP session with state 0xa2f91851a61c01a2 (5) eap: Previous EAP request found for state 0xa2f91851a61c01a2, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 230 length 40 (5) eap: EAP session adding &reply:State = 0xa2f91851a71f01a2 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 207 from 192.168.15.22:1812 to 192.168.4.183:40744 length 98 (5) EAP-Message = 0x01e600281900170303001d0292373b404e0823111eedee248c54e45d29e31b55efe08388ffb49d22 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xa2f91851a71f01a2ba9496e09aa2d64c (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 208 from 192.168.4.183:40744 to 192.168.15.22:1812 length 299 (6) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (6) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) NAS-Port = 1 (6) Calling-Station-Id = "28-6B-35-4F-46-BF" (6) Connect-Info = "CONNECT 54Mbps 802.11a" (6) Acct-Session-Id = "7AF5DECDA3D1020E" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02e600481900170303003d000000000000000126dac151e748c5a28bcdde71e8e363af45675c1edb834d7414a4bafc3252d3c375b7322505386e598cbb1913ce51ffdf55ace14beb (6) State = 0xa2f91851a71f01a2ba9496e09aa2d64c (6) Message-Authenticator = 0x5570ed7a63c1c77a44a515eb23753651 (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 230 length 72 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xa2f91851a71f01a2 (6) eap: Finished EAP session with state 0xa2f91851a71f01a2 (6) eap: Previous EAP request found for state 0xa2f91851a71f01a2, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) EAP Done initial handshake (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - host/SL-6S4BBS3.MYDOMAIN.co.uk (6) eap_peap: Got inner identity 'host/SL-6S4BBS3.MYDOMAIN.co.uk' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (6) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) policy ad_computer_username { (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) { (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) -> TRUE (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) { (6) update request { (6) EXPAND %{1}$ (6) --> SL-6S4BBS3$ (6) &Stripped-User-Name := SL-6S4BBS3$ (6) } # update request = noop (6) if ("%{3}" != '') { (6) EXPAND %{3} (6) --> MYDOMAIN.co.uk (6) if ("%{3}" != '') -> TRUE (6) if ("%{3}" != '') { (6) update request { (6) EXPAND %{3} (6) --> MYDOMAIN.co.uk (6) &Stripped-User-Domain = MYDOMAIN.co.uk (6) EXPAND %{3} (6) --> MYDOMAIN.co.uk (6) &realm := MYDOMAIN.co.uk (6) } # update request = noop (6) } # if ("%{3}" != '') = noop (6) [updated] = updated (6) } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy ad_computer_username = updated (6) policy filter_inner_identity { (6) if (!&outer.request:User-Name || !&User-Name) { (6) if (!&outer.request:User-Name || !&User-Name) -> FALSE (6) if (&outer.request:User-Name != &User-Name) { (6) if (&outer.request:User-Name != &User-Name) -> FALSE (6) } # policy filter_inner_identity = updated (6) [chap] = noop (6) [mschap] = noop (6) suffix: Request already has destination realm set. Ignoring (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 230 length 41 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 231 length 42 (6) eap: EAP session adding &reply:State = 0xede77fe3ed00658b (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xede77fe3ed00658b2611adfefd1eb95e (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 231 length 73 (6) eap: EAP session adding &reply:State = 0xa2f91851a41e01a2 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 208 from 192.168.15.22:1812 to 192.168.4.183:40744 length 131 (6) EAP-Message = 0x01e700491900170303003e0292373b404e0824f68f6f9a55e22ab49ff88824830541895f006aace7eeff05416d88319fa5ff9a8f676fe7b7d1865a1a5dd5d02d8360dda3e2fa05f6f7 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa2f91851a41e01a2ba9496e09aa2d64c (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 209 from 192.168.4.183:40744 to 192.168.15.22:1812 length 353 (7) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (7) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) NAS-Port = 1 (7) Calling-Station-Id = "28-6B-35-4F-46-BF" (7) Connect-Info = "CONNECT 54Mbps 802.11a" (7) Acct-Session-Id = "7AF5DECDA3D1020E" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x02e7007e1900170303007300000000000000027b9322e534889e59cf73b49f78b04f94dde670f8ab5b1498810d5c67eb341706c1481bdb3e899835ad498d113a934782396acee4975a42eff342319baabd11f32833e1bb90543f6569ab798880a12f9b696c2eaa0af0d1e4c8b09d9248a72ab408acde5ec010a39d71757b (7) State = 0xa2f91851a41e01a2ba9496e09aa2d64c (7) Message-Authenticator = 0xa9e9e786e494d085735ff5c7c065a11f (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 231 length 126 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xede77fe3ed00658b (7) eap: Finished EAP session with state 0xa2f91851a41e01a2 (7) eap: Previous EAP request found for state 0xa2f91851a41e01a2, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) EAP Done initial handshake (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (7) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (7) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (7) State = 0xede77fe3ed00658b2611adfefd1eb95e (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) policy ad_computer_username { (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) { (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) -> TRUE (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) { (7) update request { (7) EXPAND %{1}$ (7) --> SL-6S4BBS3$ (7) &Stripped-User-Name := SL-6S4BBS3$ (7) } # update request = noop (7) if ("%{3}" != '') { (7) EXPAND %{3} (7) --> MYDOMAIN.co.uk (7) if ("%{3}" != '') -> TRUE (7) if ("%{3}" != '') { (7) update request { (7) EXPAND %{3} (7) --> MYDOMAIN.co.uk (7) &Stripped-User-Domain = MYDOMAIN.co.uk (7) EXPAND %{3} (7) --> MYDOMAIN.co.uk (7) &realm := MYDOMAIN.co.uk (7) } # update request = noop (7) } # if ("%{3}" != '') = noop (7) [updated] = updated (7) } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) = updated (7) ... skipping else: Preceding "if" was taken (7) } # policy ad_computer_username = updated (7) policy filter_inner_identity { (7) if (!&outer.request:User-Name || !&User-Name) { (7) if (!&outer.request:User-Name || !&User-Name) -> FALSE (7) if (&outer.request:User-Name != &User-Name) { (7) if (&outer.request:User-Name != &User-Name) -> FALSE (7) } # policy filter_inner_identity = updated (7) [chap] = noop (7) [mschap] = noop (7) suffix: Request already has destination realm set. Ignoring (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 231 length 95 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: Searching for user in group "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" rlm_ldap (ldap): Reserved connection (0) (7) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (7) files: --> (samaccountname=SL-6S4BBS3$) (7) files: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub" (7) files: Waiting for search result... ber_get_next failed, errno=11. TLS certificate verification: Error, unable to get local issuer certificate rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) files: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk" (7) files: Checking user object's memberOf attributes (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base" (7) files: Waiting for search result... (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) files: User is not a member of "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" (7) files: Searching for user in group "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" rlm_ldap (ldap): Reserved connection (1) (7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk" (7) files: Checking user object's memberOf attributes (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base" (7) files: Waiting for search result... (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN rlm_ldap (ldap): Released connection (1) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) files: User is not a member of "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" (7) files: Searching for user in group "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" rlm_ldap (ldap): Reserved connection (2) (7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk" (7) files: Checking user object's memberOf attributes (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base" (7) files: Waiting for search result... (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN (7) files: User found in group DN "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (2) (7) files: users: Matched entry DEFAULT at line 11 (7) [files] = ok rlm_ldap (ldap): Reserved connection (3) (7) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (samaccountname=SL-6S4BBS3$) (7) ldap: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub" (7) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) ldap: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk" (7) ldap: Processing user attributes (7) ldap: WARNING: No "known good" password added. Ensure the MYADMIN user has permission to read the password attribute (7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (3) (7) [ldap] = ok (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xede77fe3ed00658b (7) eap: Finished EAP session with state 0xede77fe3ed00658b (7) eap: Previous EAP request found for state 0xede77fe3ed00658b, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk (7) mschap: Client is using MS-CHAPv2 (7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}: (7) mschap: EXPAND --username=%{mschap:User-Name} (7) mschap: --> --username=SL-6S4BBS3$ (7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk (7) mschap: EXPAND --challenge=%{mschap:Challenge:-00} (7) mschap: --> --challenge=eab8de792c4017e7 (7) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00} (7) mschap: --> --nt-response=a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd (7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (7) mschap: External script failed (7) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) eap_mschapv2: [mschap] = reject (7) eap_mschapv2: } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 231 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> host/SL-6S4BBS3.MYDOMAIN.co.uk (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)\'' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected" (7) EAP-Message = 0x04e70004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04e70004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04e70004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 232 length 46 (7) eap: EAP session adding &reply:State = 0xa2f91851a51101a2 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'" (7) Sent Access-Challenge Id 209 from 192.168.15.22:1812 to 192.168.4.183:40744 length 104 (7) EAP-Message = 0x01e8002e190017030300230292373b404e0825e3a4e9c5f699e6fe4e5edeebdd618ae26ccc847c29515b2490b95f (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xa2f91851a51101a2ba9496e09aa2d64c (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 210 from 192.168.4.183:40744 to 192.168.15.22:1812 length 273 (8) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk" (8) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) NAS-Port = 1 (8) Calling-Station-Id = "28-6B-35-4F-46-BF" (8) Connect-Info = "CONNECT 54Mbps 802.11a" (8) Acct-Session-Id = "7AF5DECDA3D1020E" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x02e8002e190017030300230000000000000003ea33017147c3302fdd480b9bd7a1ca0fd7ba7737df755ffe4ea240 (8) State = 0xa2f91851a51101a2ba9496e09aa2d64c (8) Message-Authenticator = 0x03f0ffd538cbbb486e3851ef134e7a75 (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'" (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 232 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xa2f91851a51101a2 (8) eap: Finished EAP session with state 0xa2f91851a51101a2 (8) eap: Previous EAP request found for state 0xa2f91851a51101a2, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: (TLS) EAP Done initial handshake (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 232 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> host/SL-6S4BBS3.MYDOMAIN.co.uk (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 210 from 192.168.15.22:1812 to 192.168.4.183:40744 length 44 (8) EAP-Message = 0x04e80004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. (5) Cleaning up request packet ID 207 with timestamp +24 due to cleanup_delay was reached (6) Cleaning up request packet ID 208 with timestamp +24 due to cleanup_delay was reached Waking up in 0.3 seconds. (7) Cleaning up request packet ID 209 with timestamp +24 due to cleanup_delay was reached (8) Cleaning up request packet ID 210 with timestamp +25 due to cleanup_delay was reached Ready to process requests

5 11

Problems with CRL
by ChristopherNeufer Neufer 04 Apr '23

04 Apr '23

Hello together,almost everyting from our Radius is working fine. There is only One Problem. For some reason the CRL it not valid anymore after about 1 week. In the mods/enable -> eap i did this configuration ca_path_reload_interval = 3600 Someone know this problem? Right now i cannot provide the debug log becaus it was running for a week. Some more information: Every night im downloading the windows crl and ad it to my certificate chain.then restart with:systemctl restart freeradius.service Would be awesome if someone can help me. RegardsChris

1 0