- Freeradius-Users - lists.freeradius.org

radclient
by ulrich ramassamy 06 May '12

06 May '12

Hello, I am writing you because I need your help on using the tool "radclient". I need to send Packet Of Disconnect (POD). I have one file (for example name "file1") and in this file, I have 3 columns (IP, MSISDN, Acct-Session-Id): IP MSISDN Acct-Session-Id 1.1.1.1 3368894XXXX 500A02B2382F3D8E 2.2.2.2 3368739XXXX 500A02B5383F27D9 I read on this site: "http://wiki.freeradius.org/Disconnect-Messages" and the proposed solution tells us to insert in a file "packet.txt" the attributes that we wish send. In this method we have to create one file for one POD. :( Now I want to use the file "file1" by selecting the attibutes to send POD one to one in one command (linux command) like this : Sending Disconnect-Request of id 214 to 1.1.1.1 port 3799 Framed-IP-Address=1.1.1.1 Acct-Session-ID=500A02B2382F3D8E rad_recv: Disconnect-ACK packet from host 1.1.1.1 port 3799, id= 214, length=20 Sending Disconnect-Request of id 215 to 2.2.2.2 port 3799 Framed-IP-Address=2.2.2.2 Acct-Session-ID=500A02B5383F27D9 rad_recv: Disconnect-ACK packet from host 2.2.2.2 port 3799, id=215, length=20 I need to know if It's possible to do this (I think by using a loop "for"!!!)? Can you please help me? Thanks for your help. Best regards, Ulrich RAMASSAMY Tél: +33671783501 PS: Sorry for my english^^

1 0

FreeRadius - IIS & Outlook Web Access (OWA)
by udptelecom 04 May '12

04 May '12

Hi, Anyone know of an ISAPI filter that understands RADIUS that can be used to authenticate to FreeRadius. This would be used to authenticate access to Outlook Web Access (OWA) running under IIS. I know of one provider http://www.tcpdata.com - but they're site is currently down and all my calls & emails have gone unanswered. Thanks! Abedi

2 2

[EAP-TLS Windows 7] Problem with chain certificate on the client side
by jinx_20 04 May '12

04 May '12

Hi all, My PKI infrastructure is hierarchical, meaning that client certificate path looks like below: ROOT_CA->Sub1_CA->Sub2_CA->Client_Cert Client_Cert & Sub2_CA purposes are set correctly. After I import client certificate (client.p12) into the Windows Cert Store the following events occur: -Root CA cert is imported into the Trusted Root CAs, -every sub CA cert (Sub1 CA & Sub2 CA) is imported into the Intermediate CAs, -user's cert is imported into Personal Certificates, I can't connect.... As soon as I delete Sub2 CA (that is, the CA certificate of the certificate authority which issued client's certificate) I am able to connect successfully. I suspect that Windows 7 supplicant sends entire chain of client certificate to FreeRadius server what makes it confused. I suppose that FreeRadius cannot verify Sub2_CA certificate received from the client because its purpose is not "Client Auth". As a result FreeRadius outputs the following message: *--> verify error:num=26:unsupported certificate purpose [tls] >>> TLS 1.0 Alert [length 0002], fatal unsupported_certificate TLS Alert write:fatal:unsupported certificate TLS_accept: error in SSLv3 read client certificate B rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. TLS receive handshake failed during operation* Below you can find two debug outputs. First one represents situation when Sub2 CA is present in the Intermediate CAs Store and another one shows the case when Sub2 CA was deleted. Additionally, CA_file in the eap.conf is set to ${cadir}/Sub2_CA_*entire_chain*.pem When I try to connect from linux machine everything works great (wpa supplicant doesn't send entire client's certificate chain toward radius server, it sends only client cert - the last cert from the chain). The problem arised while connecting from Windows 7 machine. Is there any way to configure FreeRadius server to explicitly accept intermediate CAs received from the client supplicant? Appreciate any hints. Gabriel ############################################### ################## FAILD ###################### ################## FAILD ###################### ############################################### rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=182, length=193 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 18 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 182 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=183, length=298 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 105 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 95 [tls] Length Included [tls] eaptls_verify returned 11 [tls] (other): before/accept initialization [tls] TLS_accept: before/accept initialization [tls] <<< TLS 1.0 Handshake [length 005a], ClientHello [tls] TLS_accept: SSLv3 read client hello A [tls] >>> TLS 1.0 Handshake [length 0031], ServerHello [tls] TLS_accept: SSLv3 write server hello A [tls] >>> TLS 1.0 Handshake [length 0578], Certificate [tls] TLS_accept: SSLv3 write certificate A [tls] >>> TLS 1.0 Handshake [length 00f9], CertificateRequest [tls] TLS_accept: SSLv3 write certificate request A [tls] TLS_accept: SSLv3 flush data [tls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 183 to 172.16.16.1 port 32770 EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=184, length=199 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 184 to 172.16.16.1 port 32770 EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=185, length=1695 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 5695 [tls] Received EAP-TLS First Fragment of the message [tls] eaptls_verify returned 9 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 185 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=186, length=1695 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] More fragments to follow [tls] eaptls_verify returned 10 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 186 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=187, length=1695 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] More fragments to follow [tls] eaptls_verify returned 10 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 187 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=188, length=1448 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] <<< TLS 1.0 Handshake [length 13f3], Certificate --> verify error:num=26:unsupported certificate purpose [tls] >>> TLS 1.0 Alert [length 0002], fatal unsupported_certificate TLS Alert write:fatal:unsupported certificate TLS_accept: error in SSLv3 read client certificate B rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. TLS receive handshake failed during operation [tls] eaptls_process returned 4 [eap] Handler failed in EAP/tls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 2762_hd.test6 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 6 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 6 Sending Access-Reject of id 188 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF Waking up in 3.9 seconds. Cleaning up request 0 ID 182 with timestamp +23 Cleaning up request 1 ID 183 with timestamp +23 Cleaning up request 2 ID 184 with timestamp +23 Cleaning up request 3 ID 185 with timestamp +23 Cleaning up request 4 ID 186 with timestamp +23 Cleaning up request 5 ID 187 with timestamp +23 Waking up in 1.0 seconds. Cleaning up request 6 ID 188 with timestamp +23 Ready to process requests. ############################################### ################## ACCEPT ###################### ################## ACCEPT ###################### ############################################### rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=189, length=193 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 18 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 189 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=190, length=298 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 105 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 95 [tls] Length Included [tls] eaptls_verify returned 11 [tls] (other): before/accept initialization [tls] TLS_accept: before/accept initialization [tls] <<< TLS 1.0 Handshake [length 005a], ClientHello [tls] TLS_accept: SSLv3 read client hello A [tls] >>> TLS 1.0 Handshake [length 0031], ServerHello [tls] TLS_accept: SSLv3 write server hello A [tls] >>> TLS 1.0 Handshake [length 0578], Certificate [tls] TLS_accept: SSLv3 write certificate A [tls] >>> TLS 1.0 Handshake [length 00f9], CertificateRequest [tls] TLS_accept: SSLv3 write certificate request A [tls] TLS_accept: SSLv3 flush data [tls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 190 to 172.16.16.1 port 32770 EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=191, length=199 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 191 to 172.16.16.1 port 32770 EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=192, length=1695 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 2193 [tls] Received EAP-TLS First Fragment of the message [tls] eaptls_verify returned 9 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 192 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=193, length=914 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF EAP-Message = 0xFF EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] <<< TLS 1.0 Handshake [length 0645], Certificate [tls] chain-depth=3, [tls] error=0 [tls] --> User-Name = 2762_hd.test6 [tls] --> BUF-Name = SNAKE OIL ROOT CA [tls] --> subject = /CN=SNAKE OIL ROOT CA/OU=Digital Certificate Services/O=Snake Oil Company/C=PL [tls] --> issuer = /CN=SNAKE OIL ROOT CA/OU=Digital Certificate Services/O=Snake Oil Company/C=PL [tls] --> verify return:1 [tls] chain-depth=2, [tls] error=0 [tls] --> User-Name = 2762_hd.test6 [tls] --> BUF-Name = SNAKE OIL CA [tls] --> subject = /CN=SNAKE OIL CA/O=Snake Oil Company 2/C=PL [tls] --> issuer = /CN=SNAKE OIL ROOT CA/OU=Digital Certificate Services/O=Snake Oil Company/C=PL [tls] --> verify return:1 [tls] chain-depth=1, [tls] error=0 [tls] --> User-Name = 2762_hd.test6 [tls] --> BUF-Name = SNAKE OIL WIFI CA [tls] --> subject = /CN=SNAKE OIL WIFI CA/O=Snake Oil Company 2/C=PL [tls] --> issuer = /CN=SNAKE OIL CA/O=Snake Oil Company 2/C=PL [tls] --> verify return:1 [tls] Verifying client certificate: /etc/freeradius/geppetto.sh %{TLS-Client-Cert-Filename} %{Called-Station-Id} [tls] expand: %{TLS-Client-Cert-Filename} -> /tmp/radiusd/freeradius.client.XXnI1oCe [tls] expand: %{Called-Station-Id} -> XX-XX-XX-XX-XX-XX:SSID + GREP=/bin/grep + LDAP=/usr/bin/ldapsearch + OPENSSL=/usr/bin/openssl + cp /tmp/radiusd/freeradius.client.XXnI1oCe /tmp/ + exit 0 Exec-Program output: Exec-Program: returned: 0 [tls] Client certificate CN 2762_hd.test6 passed external validation [tls] chain-depth=0, [tls] error=0 [tls] --> User-Name = 2762_hd.test6 [tls] --> BUF-Name = 2762_hd.test6 [tls] --> subject = /emailAddress=2762_hd.test6@snakeoil.com/CN=2762_hd.test6/GN=HD/SN=Test6/OU=Operations/OU=HelpDesk/O=Snake Oil Company [tls] --> issuer = /CN=SNAKE OIL WIFI CA/O=Snake Oil Company 2/C=PL [tls] --> verify return:1 [tls] TLS_accept: SSLv3 read client certificate A [tls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [tls] TLS_accept: SSLv3 read client key exchange A [tls] <<< TLS 1.0 Handshake [length 0106], CertificateVerify [tls] TLS_accept: SSLv3 read certificate verify A [tls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [tls] <<< TLS 1.0 Handshake [length 0010], Finished [tls] TLS_accept: SSLv3 read finished A [tls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [tls] TLS_accept: SSLv3 write change cipher spec A [tls] >>> TLS 1.0 Handshake [length 0010], Finished [tls] TLS_accept: SSLv3 write finished A [tls] TLS_accept: SSLv3 flush data [tls] (other): SSL negotiation finished successfully SSL Connection Established [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 193 to 172.16.16.1 port 32770 EAP-Message = 0xFF Message-Authenticator = 0xFF State = 0xFF Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.16.16.1 port 32770, id=194, length=199 User-Name = "2762_hd.test6" Calling-Station-Id = "AA-AA-AA-AA-AA-AA" Called-Station-Id = "XX-XX-XX-XX-XX-XX:SSID" NAS-Port = 1 NAS-IP-Address = 172.16.16.1 NAS-Identifier = "wlc.intra" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "2" EAP-Message = 0xFF State = 0xFF Message-Authenticator = 0xFF # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "2762_hd.test6", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake is finished [tls] eaptls_verify returned 3 [tls] eaptls_process returned 3 [tls] Adding user data to cached session [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 194 to 172.16.16.1 port 32770 MS-MPPE-Recv-Key = 0xFF MS-MPPE-Send-Key = 0xFF EAP-Message = 0xFF Message-Authenticator = 0xFF User-Name = "2762_hd.test6" Finished request 5. Going to the next request Waking up in 4.9 seconds. -- View this message in context: http://freeradius.1045715.n5.nabble.com/EAP-TLS-Windows-7-Problem-with-chai… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 13

SHA-256,384,512?
by Stefan Winter 04 May '12

04 May '12

Hi, I'm trying to figure out if FreeRADIUS supports SHA-2 (256,384,512 variants) or just SHA1. Some attributes have only "SSHA" in their name, without a "-1" so I thought they could do more than SHA-1. Looking at the source code of 2.1.12, it doesn't look like it though, SHA seems to be synonymous for SHA-1. Can I get a quick confirmation that the SHA-2 family is not supported for password hashes? Anything coming up in that regard in 3.0? Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg Tel: +352 424409 1 Fax: +352 422473

2 1

Very huge Acct-Session-Time
by Sharad P 04 May '12

04 May '12

Hello, I'm analyzing Radius accounting data from my AP(access point). Found some unusual behavior. The Acct-Session-Time is very huge, about 42 years. Also the Acct-Status-Type is set to Interim-Update. Some additional info NAS-Port-Type = Wireless-802.11 User-Name = "Unknown" Acct-Session-Time = 1335709914 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Any ideas regarding such a huge active session time? Thanks in advance. Regards, Sharad Panicker -- View this message in context: http://freeradius.1045715.n5.nabble.com/Very-huge-Acct-Session-Time-tp56797… Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 11

Using virtual servers to authenticate with different ports and Users
by Alan Kong 04 May '12

04 May '12

Hi, I am new to the idea of virtual servers on freeradius. I would like to authenticate one group of users using Port 1812 and a second group of users on port 1645 with the intention of using virtual server settings. I have got freeradius 2.1.11 with default radiusd.conf settings working according to the instructions from freeradius wiki. I would like to change the default settings in using virutal server by enclosing the first "listen section with type=auth" on default "radiusd.conf" with server wifi. However, the test user was rejected. Please let me know whether I need other settings to be modified to get the user accepted. I am only changing the default settings into one virtual server at the moment. Thank you. Regards Alan Enclosed please find messages from "radiusd -X" after "virtual server wifi" added: Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address * port 1812 as server wifi Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 38387, id=56, length=59 User-Name = "testing" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 server wifi { WARNING: Empty authorize section. Using default return values. ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. } # server wifi Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 56 to 127.0.0.1 port 38387 Waking up in 4.9 seconds. Cleaning up request 0 ID 56 with timestamp +38 Ready to process requests.

2 4

Configuring freeradius for MACsec
by Matija Levec 03 May '12

03 May '12

Hello everyone, I'm trying to configure MACsec (per http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/de… ) in a test lab using cisco supplicant & switch and freeradius 2.1.12. Cisco docs say: "The CAK is delivered in the RADIUS vendor-specific attributes (VSAs) MS-MPPE-Send-Key and MS-MPPE-Recv-Key." "...authentication server sends an EAP key identifier that is derived from the EAP exchange and is delivered to the authenticator in the EAP Key-Name attribute of the Access-Accept message." With successful EAP-TLS authentication the Access-Accept message sent from freeradius looks like this: Sending Access-Accept of id 37 to 10.20.64.9 port 1645 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "123" MS-MPPE-Recv-Key = 0x84e5c624c3bcdeadca3c6210f24bd7b8336921ccc1c58399d397afc75770332c MS-MPPE-Send-Key = 0xa6c4860cc8092c251502f5adc3ee13586e05fe84cbbb8b6793b08d9523d12b1f EAP-Message = 0x03640004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "user1" What should be configured for radius to also send EAP-Key-Name AVP? Kind regards, Matija Levec

5 6

sqlcounter_expire_on_login module
by tonimanel 03 May '12

03 May '12

Hi everybody, I have been looking for how to solve this: A user log in to freeradius, and after the first login, exactly one day later the access should to expire. Example: User: 'aaa' - 1 day (24hours). First login: 2012-04-02 12:00:00 Expires on: 2012-04-03 12:00:00 I have enabled sqlcounter_expire_on_login module, when user log in first time, there are not uses (radacct is empty for this user) but, sqlcounter_expire_on_login's query returns empty set value, not returns a valid value (for example 0) so, when freeradius check the return, says this: (freeradius -X output) rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;' [expire_on_login] expand: SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1; -> SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='sa373YIMET' ORDER BY acctstarttime LIMIT 1; sqlcounter_expand: '%{sql:SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='sa373YIMET' ORDER BY acctstarttime LIMIT 1;}' [expire_on_login] sql_xlat [expire_on_login] expand: %{User-Name} -> sa373YIMET [expire_on_login] sql_set_user escaped user --> 'sa373YIMET' [expire_on_login] expand: SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='sa373YIMET' ORDER BY acctstarttime LIMIT 1; -> SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='sa373YIMET' ORDER BY acctstarttime LIMIT 1; rlm_sql (sql): Reserving sql socket id: 3 [expire_on_login] SQL query did not return any results rlm_sql (sql): Released sql socket id: 3 [expire_on_login] expand: %{sql:SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) FROM radacct WHERE UserName='sa373YIMET' ORDER BY acctstarttime LIMIT 1;} -> rlm_sqlcounter: No integer found in string "" ++[expire_on_login] returns noop Anybody could tell me how can I do to solve it? I hope your answers. Thank you very much. Best regards, Antonio. -- View this message in context: http://freeradius.1045715.n5.nabble.com/sqlcounter-expire-on-login-module-t… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

realm rewrite or alias?
by Beau Sapach 03 May '12

03 May '12

Hello everyone, I've got FreeRADIUS running to proxy requests from a wireless controller to a domain controller (NPS). The realm name is being passed to NPS as the logon domain, which is fine but I'd like to catch a number of different possible realms that users may put into the login and 'rewrite' them to the proper domain name so that the domain controller doesn't reject the login and we get fewer helpdesk calls. After looking through the config files an doing a bit of searching online I still haven't found a way to do that, is it possible? Beau

2 1

sending mail mechanism of radwatch
by 魏景鹏 03 May '12

03 May '12

2 1