- Freeradius-Users - lists.freeradius.org

rlm_sqlcounter doesn't increase counter
by pamela pomary 05 Mar '12

05 Mar '12

Hello Fellow Freeradius-Users, I have freeradius-1.1.3 installed on Cent OS and I have Cisco C2960 switch as my NAS. I have a task to allocate browsing time 2hrs per day to students in our computer labs. Logs from radius in debug mode, counter doesn't increase it always shows (Check item - counter) is greater than zero; check_item=120, counter=0. Users are not signed out after Max-Daily-Session is reached. I want to be able to disconnect a user logged in after they reach their maximum daily session. Kindly find below config files which indicate maximum daily session of 120 seconds for testing purposes. I have searched through Freeradius's mailing-List but have not found solution yet. I will be grateful for any help. Thank you. ############################### config on Cisco switch C2960 ############################# aaa new-model ! ! aaa group server radius dot1x ! aaa authentication login default group radius local aaa authentication dot1x default group radius aaa authorization exec default group radius if-authenticated aaa authorization network default group radius aaa accounting send stop-record authentication failure aaa accounting suppress null-username aaa accounting session-duration ntp-adjusted aaa accounting update newinfo periodic 1 aaa accounting exec default start-stop group radius aaa accounting network default start-stop group radius aaa accounting connection default start-stop group radius aaa accounting resource default start-stop-failure group radius interface FastEthernet0/9 switchport access vlan 6 switchport mode access authentication host-mode multi-auth authentication port-control auto authentication periodic authentication timer inactivity 5 dot1x pae both dot1x max-req 3 spanning-tree portfast radius-server host 10.1.7.202 auth-port 1812 acct-port 1813 key "key" ############################### /etc/raddb/sqlcounter.conf ################################ sqlcounter noresetcounter { counter-name = Max-All-Session-Time check-name = Max-All-Session sqlmod-inst = sql key = User-Name reset = never query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" } sqlcounter dailycounter { filename = ${raddbdir}/db.daily count-attribute = Acct-Session-Time driver = "rlm_sqlcounter" allowed-servicetype = Framed-User counter-name = Daily-Session-Time check-name = Max-Daily-Session sqlmod-inst = sqlcca3 key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } sqlcounter monthlycounter { counter-name = Monthly-Session-Time check-name = Max-Monthly-Session sqlmod-inst = sqlcca3 key = User-Name reset = monthly query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } ###################################################################### /etc/raddb/radius.conf ###################################################################### modules { $INCLUDE ${confdir}/sqlcounter.conf instantiate { exec expr dailycounter } authorize { preprocess mschap suffix eap files sql dailycounter } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } unix eap } ####################################################################### /etc/raddb/users ####################################################################### clare Max-Daily-Session := 120, User-Password := "password" Auth-Type := Reject, Reply-Message = "Your time limit is used", Simultaneous-Use := 1, ######################################################################### Dubug output ######################################################################### Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.5.4:1645, id=220, length=244 User-Name = "clare" Service-Type = Framed-User Framed-MTU = 1500 Called-Station-Id = "EC-30-91-1D-69-89" Calling-Station-Id = "00-1E-33-D5-7A-68" EAP-Message = 0x0209002b19001703010020205ecf13b3dc88bd738478cf6a2111e5903a5089b64e282bc15b5c7c6c0e771c Message-Authenticator = 0x2cac65588536701091195c7b06db31a1 Cisco-AVPair = "audit-session-id=0A01050400000672A669A7C1" NAS-Port-Type = Ethernet NAS-Port = 50009 NAS-Port-Id = "FastEthernet0/9" State = 0xb014050291b7b551b59b2a5f168e4f7d NAS-IP-Address = 10.1.5.4 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 26 modcall[authorize]: module "preprocess" returns ok for request 26 modcall[authorize]: module "mschap" returns noop for request 26 rlm_realm: No '@' in User-Name = "clare", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 26 rlm_eap: EAP packet type response id 9 length 43 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 26 users: Matched entry clare at line 97 modcall[authorize]: module "files" returns ok for request 26 radius_xlat: 'clare' rlm_sql (sql): sql_set_user escaped user --> 'clare' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'clare' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): User clare not found in radcheck radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): User clare not found in radgroupcheck rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): User not found modcall[authorize]: module "sql" returns notfound for request 26 rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime - GREATEST((1330102800 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{User-Name}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330102800'' radius_xlat: 'SELECT SUM(AcctSessionTime - GREATEST((1330102800 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330102800'' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime - GREATEST((1330102800 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330102800'}' radius_xlat: Running registered xlat function of module sql for string 'SELECT SUM(AcctSessionTime - GREATEST((1330102800 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330102800'' rlm_sql (sql): - sql_xlat radius_xlat: 'clare' rlm_sql (sql): sql_set_user escaped user --> 'clare' radius_xlat: 'SELECT SUM(AcctSessionTime - GREATEST((1330102800 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330102800'' rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): row[0] returned NULL rlm_sql (sql): Released sql socket id: 3 radius_xlat: '' rlm_sqlcounter: (Check item - counter) is greater than zero rlm_sqlcounter: Authorized user clare, check_item=120, counter=0 rlm_sqlcounter: Sent Reply-Item for user clare, Type=Session-Timeout, value=120 modcall[authorize]: module "dailycounter" returns ok for request 26 modcall: leaving group authorize (returns updated) for request 26 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 26 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 26 modcall: leaving group authenticate (returns ok) for request 26 radius_xlat: 'Your time limit is used' Login OK: [clare] (from client C2960_NOC_LAN1 port 50009 cli 00-1E-33-D5-7A-68) Sending Access-Accept of id 220 to 10.1.5.4 port 1645 Reply-Message = "Your time limit is used" Session-Timeout = 120 MS-MPPE-Recv-Key = 0x33430a677c0ab2f0331e95b8ad8a7c96de6ac7e8065f622a7883bb736882d0e0 MS-MPPE-Send-Key = 0xed2c5c1c315e2387e636c3796035e004cb93d3d159a17c696a73bcd418ac483b EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "clare" Finished request 26

3 4

Test Environment: Can PEAPv0 and PEAPv1 be setup together on the default instance?
by whopeman 05 Mar '12

05 Mar '12

Hi, I am fairly new to FreeRADIUS, so pelase bear with me a bit. I have searched the forums and websites to find an implementation that allows me to configure my server to process BOTH PEAP MSCHAP and PEAP/EAP-GTC (v0 and v1). I have not found anyone trying to do this, but I am not working on a production system this is for test purposes. My GOAL: I am working to setup a test environment that allows us to test our products using EAP-TLS, EAP-TTLS, LEAP, PEAP/MSChap, and PEAP/EAP-GTC. CURRENT: What I have so far is a working system that processes everything except PEAP/EAP-GTC. All authentication is performed through a local LDAP solution (setup with CLEAR-TEXT again testing not production). All of this is using the same client and the same certificates (i.e. the same certificate that is being used for PEAP/MSCHAP is being used for PEAP/EAP-GTC for tunnel authentication). What I am seeing in the logs is the standard check your certificates message (as seen below in the radiusd -X log). Like I said it is the same cert and client that works for PEAPv0... so I am guessing this is not the actual problem. I have run wireshark and grabbed the packet traces as well, when my client connects it requests PEAP as the preferred auth type but FR seems to be pushing v0 as the request type and does not seem to be allowing for v1. My client does not handle this gracefully. My QUESTION: Is there an easy way to configure FR to allow for both types of requests? I have been looking at the virtual server options without much luck in understanding how to configure a secondary virtual server to provide a GTC interface. If that is a recommendation, any guidance on setting up a straight EAP-GTC via LDAP virtual server would be appreciated. Thanks in advanced for any assistance. Logs below: FreeRADIUS Version 2.1.12, for host x86_64-suse-linux-gnu, built on Feb 13 2012 at 14:07:11 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.0.12.100 { require_message_authenticator = no secret = "V0c0ll3ct" shortname = "SQA_WLC" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/u02/security/EapCA" pem_file_type = yes private_key_file = "/u02/security/FreeRADIUS/FreeRADIUS.pem" certificate_file = "/u02/security/FreeRADIUS/FreeRADIUS.pem" CA_file = "/u02/security/EapCA/EapCA.pem" private_key_password = "FreeRADIUS" dh_file = "/u02/security/FreeRADIUS/dh" random_file = "/u02/security/FreeRADIUS/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/u02/security/FreeRADIUS/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 0 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "eng-eap-auth" port = 389 password = "OpenDSAdmin" identity = "cn=OpenDSAdmin" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=eap,dc=eng" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes keepalive { interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x6c9850 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 32774 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=88, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0x96d7e61227c67c001087e31d038751dc # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to eng-eap-auth:389, authentication 0 [ldap] bind as cn=OpenDSAdmin/OpenDSAdmin to eng-eap-auth:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 88 to 10.0.12.100 port 32769 EAP-Message = 0x0102001604106161c64876ee8e168904949a27509d24 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x669d9c54669f980162c5c19a61c497cc Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=89, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0x669d9c54669f980162c5c19a61c497cc Message-Authenticator = 0x09bf99497269530bdd70e1c66d4f4501 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 89 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x669d9c54679e850162c5c19a61c497cc Finished request 1. Going to the next request Waking up in 4.7 seconds. Cleaning up request 0 ID 88 with timestamp +59 Waking up in 0.2 seconds. Cleaning up request 1 ID 89 with timestamp +59 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x669d9c54679e8501 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=90, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0x27ced1e5a2a32a1a1345bd6c0d3d3266 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 90 to 10.0.12.100 port 32769 EAP-Message = 0x0102001604104a074f41e833b0dec10667681ba64e61 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd9fddc6bd9dd9842b7990ab680bfb25 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=91, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0xbd9fddc6bd9dd9842b7990ab680bfb25 Message-Authenticator = 0xbd799dda9835151d9e485733a4e04643 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 91 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd9fddc6bc9cc4842b7990ab680bfb25 Finished request 3. Going to the next request Waking up in 4.7 seconds. Cleaning up request 2 ID 90 with timestamp +90 Waking up in 0.2 seconds. Cleaning up request 3 ID 91 with timestamp +90 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xbd9fddc6bc9cc484 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=92, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0xd0588889f2bc0833b103cacae5cad8a6 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 92 to 10.0.12.100 port 32769 EAP-Message = 0x0102001604108ed49b18ef352cd93a46d489c7659377 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf02e5ad7f02c5e675a0752e53820512b Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=93, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0xf02e5ad7f02c5e675a0752e53820512b Message-Authenticator = 0x0c3fe3419ee874b2d8e44647580871db # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 93 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf02e5ad7f12d43675a0752e53820512b Finished request 5. Going to the next request Waking up in 4.6 seconds. Cleaning up request 4 ID 92 with timestamp +96 Waking up in 0.3 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=94, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0x837a1edb18992340b636ade370f6a9e1 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 94 to 10.0.12.100 port 32769 EAP-Message = 0x010200160410b17289685d6bd1fb79aa16b845095665 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xde2490a2de2694d19fa97aded2db7696 Finished request 6. Going to the next request Waking up in 0.2 seconds. Cleaning up request 5 ID 93 with timestamp +96 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf02e5ad7f12d4367 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=95, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0xde2490a2de2694d19fa97aded2db7696 Message-Authenticator = 0x62895659920d2a77420c049fad099eb3 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 95 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xde2490a2df2789d19fa97aded2db7696 Finished request 7. Going to the next request Waking up in 4.7 seconds. Cleaning up request 6 ID 94 with timestamp +101 Waking up in 0.2 seconds. Cleaning up request 7 ID 95 with timestamp +101 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xde2490a2df2789d1 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=96, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0xeed47dd183d35ef705309aed280380b9 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 96 to 10.0.12.100 port 32769 EAP-Message = 0x0102001604104c1f599a051f9cf66475e0b201faec33 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x40d9ea6940dbeeddc07bb829a9a246f2 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=97, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0x40d9ea6940dbeeddc07bb829a9a246f2 Message-Authenticator = 0xa5b48193ce88d45547ffe563f44cb38c # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 97 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x40d9ea6941daf3ddc07bb829a9a246f2 Finished request 9. Going to the next request Waking up in 4.7 seconds. Cleaning up request 8 ID 96 with timestamp +106 Waking up in 0.2 seconds. Cleaning up request 9 ID 97 with timestamp +107 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x40d9ea6941daf3dd did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=98, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0xa8260649541b620f4171c92fafe48574 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 98 to 10.0.12.100 port 32769 EAP-Message = 0x010200160410e38f1ec4355e8913dbd8852155eb8656 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc7b9e4c8c7bbe047683488285fa13096 Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=99, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0xc7b9e4c8c7bbe047683488285fa13096 Message-Authenticator = 0x600121742fea5e5c198ef8919349b136 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 99 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc7b9e4c8c6bafd47683488285fa13096 Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=100, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0x1be2df4cc42d03da82f1072f3b742e22 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 100 to 10.0.12.100 port 32769 EAP-Message = 0x010200160410d1c7652fddc104874e938001b03b4d98 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x29876a9b29856eba5ffb610f8ca69d4f Finished request 12. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=101, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0x29876a9b29856eba5ffb610f8ca69d4f Message-Authenticator = 0x956d4ce62de7b261fbc37090e08216b8 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 101 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x29876a9b288473ba5ffb610f8ca69d4f Finished request 13. Going to the next request Waking up in 0.9 seconds. Cleaning up request 10 ID 98 with timestamp +113 Cleaning up request 11 ID 99 with timestamp +113 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xc7b9e4c8c6bafd47 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 4.0 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=102, length=163 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000e01706561707573657230 Message-Authenticator = 0x1d80cab28d231ff42da3476ff5a0881f # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 102 to 10.0.12.100 port 32769 EAP-Message = 0x0102001604105726294855175db3790c84814633b804 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1ecf498d1ecd4dfa977d6d27468f439b Finished request 14. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=103, length=173 User-Name = "peapuser0" Calling-Station-Id = "00-17-23-00-09-61" Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP" NAS-Port = 4 NAS-IP-Address = 10.0.12.100 NAS-Identifier = "SQA_WLC" Airespace-Wlan-Id = 15 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060319 State = 0x1ecf498d1ecd4dfa977d6d27468f439b Message-Authenticator = 0xb94ad161665a96e6f0f21abac0791105 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "peapuser0", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for peapuser0 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> peapuser0 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=peapuser0) [ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0" [ldap] looking for reply items in directory... [ldap] user peapuser0 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 103 to 10.0.12.100 port 32769 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1ecf498d1fcc50fa977d6d27468f439b Finished request 15. Going to the next request Waking up in 0.9 seconds. Cleaning up request 12 ID 100 with timestamp +117 Cleaning up request 13 ID 101 with timestamp +117 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x29876a9b288473ba did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 4.0 seconds. Cleaning up request 14 ID 102 with timestamp +121 Cleaning up request 15 ID 103 with timestamp +121 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x1ecf498d1fcc50fa did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Test-Environment-Can-PEAPv0-and-PEA… Sent from the FreeRadius - User mailing list archive at Nabble.com.

6 8

VLAN ID based on VSAs
by Stefano Zanmarchi 05 Mar '12

05 Mar '12

Hi, my first post here, a newbie question, thanks for your help. I'm going to set up two freeradius servers (2.1.7 on RHEL 5.5). ServerB will be connected to an AP and I want it to proxy all EAP requests to serverA (TTLS-PAP will be the only method accepted) which will do authentication using an OpenLDAP backend. My question: I'd like to configure serverA to include in the Access-Accept packet some AVPs which are specific to my Organization, like department_name, employee_role (I believe these are the so called VSAs), and I'd like serverB to perform some if-then-else logic on these VSAs to dinamically calculate the VLAN-ID to return to the AP. Is this possible (in a simple way)? Is it a common set up? Thanks, Stefano

2 3

Freeradius --with-udpfromto --disable-static on OS X 10.7
by YJZ 05 Mar '12

05 Mar '12

Hello, 1. I have been compiling Freeradius 3.0.0 or Freeradius 2.x with the --with-udpfromto flag, until very recently always on Mac OS X 10.4.11. Now I find OS X 10.7 (Lion) "no longer defines SOL_IP for {get,set}sockopt()" as described at http://trac.macports.org/ticket/30403. Inserting the following diff into ./src/lib/udpfromto.c does the trick of getting Freeradius 3.x and 2.x to compile. --- ./src/lib/udpfromto.c.orig 2012-03-03 00:02:11.000000000 -0800 +++ ./src/lib/udpfromto.c 2012-03-03 00:28:31.000000000 -0800 @@ -49,6 +49,14 @@ RCSID("$Id$") #include <fcntl.h> /* + * Does this platform define SOL_IP + * or only bsd-style IPPROTO_IP ? + */ +#ifndef SOL_IP +#define SOL_IP IPPROTO_IP +#endif + +/* * glibc 2.4 and uClibc 0.9.29 introduce IPV6_RECVPKTINFO etc. and * change IPV6_PKTINFO This is only supported in Linux kernel >= * 2.6.14 It appears Apple's Freeradius build ((http://opensource.apple.com/source/freeradius/freeradius-32/Makefile) doesn't use --with-udpfromto, so it doesn't need this workaround. 2. After adopting some of ./configure flags Apple used in its Makefile, I notice the --disable-static one makes Freeradius compile without spitting out the huge number of deprecation warnings concerning OpenSSL, OpenDirectory, and UTMP pasted below. The OpenSSL deprecation was discussed at http://stackoverflow.com/questions/7406946/why-is-apple-depricating-openssl… and http://ludovicrousseau.blogspot.com/2011/08/mac-os-x-lion-and-openssl.html, apparently because Apple is moving to replace it with its own Common Crypto framework. I'm wondering if the Freeradius components utilizing those functions really get built successlly, with or without --disable-static, given the numerous deprecation warnings: CC eap_tls.c eap_tls.c: In function 'eaptls_operation': eap_tls.c:642: warning: 'SSL_state' is deprecated (declared at /usr/include/openssl/ssl.h:1581) eap_tls.c: In function 'eaptls_process': eap_tls.c:696: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) eap_tls.c:783: warning: 'SSL_state' is deprecated (declared at /usr/include/openssl/ssl.h:1581) eap_tls.c:813: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) CC mppe_keys.c mppe_keys.c: In function 'P_hash': mppe_keys.c:63: warning: 'HMAC_CTX_init' is deprecated (declared at /usr/include/openssl/hmac.h:90) mppe_keys.c:64: warning: 'HMAC_CTX_init' is deprecated (declared at /usr/include/openssl/hmac.h:90) <snipped> mppe_keys.c:98: warning: 'HMAC_CTX_cleanup' is deprecated (declared at /usr/include/openssl/hmac.h:91) mppe_keys.c:99: warning: 'HMAC_CTX_cleanup' is deprecated (declared at /usr/include/openssl/hmac.h:91) mppe_keys.c: In function 'PRF': mppe_keys.c:112: warning: 'EVP_md5' is deprecated (declared at /usr/include/openssl/evp.h:662) mppe_keys.c:113: warning: 'EVP_sha1' is deprecated (declared at /usr/include/openssl/evp.h:666) CC rlm_eap_tls.c rlm_eap_tls.c: In function 'eaptls_initiate': rlm_eap_tls.c:177: warning: 'SSL_set_verify' is deprecated (declared at /usr/include/openssl/ssl.h:1385) rlm_eap_tls.c:187: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) rlm_eap_tls.c:188: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) rlm_eap_tls.c:189: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) rlm_eap_tls.c:190: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) rlm_eap_tls.c:192: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) rlm_eap_tls.c: In function 'eaptls_authenticate': rlm_eap_tls.c:277: warning: 'SSL_get_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1587) LINK rlm_eap_tls.la rlm_eap_tls.lo rlm_eap_tls.c peap.c: In function 'eappeap_process': peap.c:768: warning: 'SSL_ctrl' is deprecated (declared at /usr/include/openssl/ssl.h:1496) LINK rlm_eap_peap.la rlm_eap_peap.lo peap.lo rlm_eap_peap.c peap.c CC rlm_eap_pwd.c rlm_eap_pwd.c: In function 'eap_pwd_detach': rlm_eap_pwd.c:95: warning: 'BN_CTX_free' is deprecated (declared at /usr/include/openssl/bn.h:407) rlm_eap_pwd.c: In function 'eap_pwd_attach': rlm_eap_pwd.c:124: warning: 'BN_CTX_new' is deprecated (declared at /usr/include/openssl/bn.h:403) rlm_eap_pwd.c: In function 'free_session': rlm_eap_pwd.c:143: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) rlm_eap_pwd.c:144: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) <snipped> rlm_eap_pwd.c:553: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) rlm_eap_pwd.c:554: warning: 'BN_bn2bin' is deprecated (declared at /usr/include/openssl/bn.h:423) CC eap_pwd.c CC eap_pwd.c eap_pwd.c: In function 'H_Init': eap_pwd.c:68: warning: 'HMAC_Init' is deprecated (declared at /usr/include/openssl/hmac.h:96) eap_pwd.c:68: warning: 'EVP_sha256' is deprecated (declared at /usr/include/openssl/evp.h:673) eap_pwd.c: In function 'H_Update': eap_pwd.c:74: warning: 'HMAC_Update' is deprecated (declared at /usr/include/openssl/hmac.h:99) eap_pwd.c: In function 'H_Final': eap_pwd.c:82: warning: 'HMAC_Final' is deprecated (declared at /usr/include/openssl/hmac.h:100) eap_pwd.c:83: warning: 'HMAC_CTX_cleanup' is deprecated (declared at /usr/include/openssl/hmac.h:91) <snipped> eap_pwd.c:117: warning: 'HMAC_CTX_cleanup' is deprecated (declared at /usr/include/openssl/hmac.h:91) eap_pwd.c: In function 'compute_password_element': eap_pwd.c:164: warning: 'EC_GROUP_new_by_curve_name' is deprecated (declared at /usr/include/openssl/ec.h:189) eap_pwd.c:169: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) <snipped> eap_pwd.c:301: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c:302: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c: In function 'compute_scalar_element': eap_pwd.c:316: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) eap_pwd.c:317: warning: 'EC_POINT_new' is deprecated (declared at /usr/include/openssl/ec.h:204) <snipped> eap_pwd.c:330: warning: 'EC_POINT_mul' is deprecated (declared at /usr/include/openssl/ec.h:259) eap_pwd.c:336: warning: 'EC_POINT_invert' is deprecated (declared at /usr/include/openssl/ec.h:248) eap_pwd.c:343: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c: In function 'process_peer_commit': eap_pwd.c:356: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) eap_pwd.c:357: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) <snipped> eap_pwd.c:441: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c:442: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c: In function 'compute_server_confirm': eap_pwd.c:458: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) eap_pwd.c:459: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) <snipped> eap_pwd.c: In function 'compute_peer_confirm': eap_pwd.c:593: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) eap_pwd.c:594: warning: 'BN_new' is deprecated (declared at /usr/include/openssl/bn.h:417) <snipped> eap_pwd.c:708: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c:709: warning: 'BN_free' is deprecated (declared at /usr/include/openssl/bn.h:468) eap_pwd.c: In function 'compute_keys': eap_pwd.c:724: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) eap_pwd.c:735: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) <snipped> eap_pwd.c:750: warning: 'BN_bn2bin' is deprecated (declared at /usr/include/openssl/bn.h:423) eap_pwd.c:751: warning: 'BN_num_bits' is deprecated (declared at /usr/include/openssl/bn.h:415) eap_pwd.c:762: warning: pointer targets in passing argument 3 of 'eap_pwd_kdf' differ in signedness LINK rlm_eap_pwd.la rlm_eap_pwd.lo eap_pwd.lo rlm_eap_pwd.c eap_pwd.c CC rlm_eap_ttls.c rlm_eap_ttls.c: In function 'eapttls_authenticate': rlm_eap_ttls.c:208: warning: 'SSL_ctrl' is deprecated (declared at /usr/include/openssl/ssl.h:1496) CC rlm_mschap.c rlm_mschap.c:651: warning: no previous prototype for 'mschap_add_reply' rlm_mschap.c: In function 'do_mschap_cpw': rlm_mschap.c:899: warning: 'RC4_set_key' is deprecated (declared at /usr/include/openssl/rc4.h:84) rlm_mschap.c:900: warning: 'RC4' is deprecated (declared at /usr/include/openssl/rc4.h:86) CC opendir.c opendir.c: In function 'getUserNodeRef': opendir.c:65: warning: 'dsDataBufferAllocate' is deprecated (declared at /System/Library/Frameworks/DirectoryService.framework/Headers/DirServicesUtils.h:46) opendir.c:73: warning: 'dsFindDirNodes' is deprecated (declared at /System/Library/Frameworks/DirectoryService.framework/Headers/DirServices.h:195) <snipped> opendir.c:390: warning: 'dsCloseDirNode' is deprecated (declared at /System/Library/Frameworks/DirectoryService.framework/Headers/DirServices.h:235) opendir.c:392: warning: 'dsCloseDirService' is deprecated (declared at /System/Library/Frameworks/DirectoryService.framework/Headers/DirServices.h:92) LINK rlm_mschap.la rlm_mschap.lo mschap.lo smbdes.lo opendir.lo rlm_mschap.c mschap.c smbdes.c opendir.c rlm_unix.c: In function 'unix_accounting': rlm_unix.c:417: warning: 'utmp' is deprecated (declared at /usr/include/utmp.h:96) CC threads.c threads.c: In function 'setup_ssl_mutexes': threads.c:251: warning: 'OPENSSL_add_all_algorithms_noconf' is deprecated (declared at /usr/include/openssl/evp.h:828) threads.c:254: warning: 'CRYPTO_num_locks' is deprecated (declared at /usr/include/openssl/crypto.h:415) threads.c:260: warning: 'CRYPTO_num_locks' is deprecated (declared at /usr/include/openssl/crypto.h:415) threads.c:264: warning: 'CRYPTO_set_id_callback' is deprecated (declared at /usr/include/openssl/crypto.h:425) threads.c:265: warning: 'CRYPTO_set_locking_callback' is deprecated (declared at /usr/include/openssl/crypto.h:418) threads.c: In function 'request_handler_thread': threads.c:586: warning: 'ERR_clear_error' is deprecated (declared at /usr/include/openssl/err.h:278) threads.c:648: warning: 'ERR_remove_state' is deprecated (declared at /usr/include/openssl/err.h:299) CC cb.c cb.c: In function 'cbtls_info': cb.c:36: warning: 'SSL_get_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1587) cb.c:44: warning: 'SSL_state_string_long' is deprecated (declared at /usr/include/openssl/ssl.h:1419) cb.c:57: warning: 'SSL_alert_type_string_long' is deprecated (declared at /usr/include/openssl/ssl.h:1536) cb.c:57: warning: 'SSL_alert_desc_string_long' is deprecated (declared at /usr/include/openssl/ssl.h:1538) cb.c:67: warning: 'SSL_want' is deprecated (declared at /usr/include/openssl/ssl.h:1352) CC tls.c tls.c: In function 'tls_new_client_session': tls.c:108: warning: 'SSL_new' is deprecated (declared at /usr/include/openssl/ssl.h:1481) tls.c:115: warning: 'SSL_set_msg_callback' is deprecated (declared at /usr/include/openssl/ssl.h:602) <snipped> tls.c:2377: warning: 'SSL_read' is deprecated (declared at /usr/include/openssl/ssl.h:1493) tls.c:2385: warning: 'SSL_get_error' is deprecated (declared at /usr/include/openssl/ssl.h:1501) CC tls_listen.c tls_listen.c: In function 'tls_socket_recv': tls_listen.c:191: warning: 'SSL_set_ex_data' is deprecated (declared at /usr/include/openssl/ssl.h:1586) <snipped> /usr/include/openssl/err.h:266) tls_listen.c:614: warning: 'ERR_error_string' is deprecated (declared at /usr/include/openssl/err.h:279) Best Regards, Y.J. Zhang -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de

2 1

RHEL Patches Broke FreeRADIUS
by McNutt, Justin M. 05 Mar '12

05 Mar '12

So my server admins did what they're supposed to do and ran "yum update" on everything last weekend. The updates included a refresh of the "freeradius2" packages that took FR from 2.1.7 to 2.1.12. That's all fine and dandy, except that what rpm does when it has config files that are part of a package - like /etc/raddb/modules/ldap - and those config files exist on your system already AND those config files have changed, is that it renames the new one to "blah.rpmnew". This created a nasty problem. Now I have an /etc/raddb/modules/ldap and an /etc/raddb/modules/ldap.rpmnew, both of which define how "ldap { }" is supposed to work. Same thing happened to the mschap module. SO... The way I avoided this problem in the $RADDB/certs and $RADDB/sites-available directories is that I'm not using the default filenames in the first place. My certs are not named "ca.pem" and "server.pem" and so on. I'm not using the "default" or "inner-tunnel" virtual server definitions. I copied them to site-specific names and used THOSE, so I get the benefit of the sanity of the built-in virtual server definitions (not to mention an unsullied copy for contrast), but rpm doesn't screw me up. The $RADDB/modules directory doesn't seem to work that way. I can't just do "cp ldap ldap-site" and call "ldap-site" from my virtual server instead of "ldap". I also can't leave it the way it is (stock) because rpm is going to come along and put another "ldap.rpmnew" file in there. I can't "not patch" FR because my predecessor went down that road and that's why he's not in charge of the RADIUS servers any more. Ideas? I'd like to tackle this from the FreeRADIUS side rather than by reconfiguring rpm because I can think of other reasons why some idio^H^H^H^H well-meaning admin might stick a test file in there without realizing that it causes problems. Switching to a site-specific module name (or some other method that allows FR to ignore the "extra" files) would prevent any such scenario. Thx! --J

4 5

LDAP (POSIX attibutes) password expiry
by up＠3.am 04 Mar '12

04 Mar '12

Hi: We've been running various versions of FreeRadius for years, currently 2.1.10 in this application. A while ago, we switched from PAM (unix) auth to LDAP auth. Everything worked fine after the switch...POSIX attributes for group membership correctly allocated the right ippools, etc. However, we just noticed that password expiry isn't working. I suspect this is because we are still using all the original POSIX attributes and none of them look like good for mapping to the ones supplied by FreeRADIUS. I see: checkItem Expiration radiusExpiration Our LDAP attributes use the following POSIX attributes to determine expiry: shadowMax: 90 shadowLastChange: 15215 With the first being the maximum age of the password and the second being the number of days since the Epoch. I will post the obligatory debug output below (with sensitive or irrelevant stuff snipped out) for a successful authentication for an expired password that shouldn't have succeeded. If anybody has an idea how to fix this with the minimal of messing around with our LDAP config itself, I'd greatly appreciate it...or, if that's unrealistic, what should be done. TIA! # /usr/sbin/radiusd -X FreeRADIUS Version 2.1.10, for host x86_64-unknown-linux-gnu, built on Oct 26 2010 at 10:54:48 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/etc/raddb/radiusd.conf including configuration file /usr/etc/raddb/clients.conf including configuration file /usr/etc/raddb/eap.conf including configuration file /usr/etc/raddb/policy.conf including files in directory /usr/etc/raddb/sites-enabled/ including configuration file /usr/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/etc/raddb/sites-enabled/default main { user = "root" group = "wheel" allow_core_dumps = no } including dictionary file /usr/etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/usr/var" logdir = "/var/log/radius" libdir = "/usr/lib" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 5 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { <SNIP> radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/etc/raddb/radiusd.conf exec { wait = yes input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/etc/raddb/radiusd.conf Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/etc/raddb/radiusd.conf expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/etc/raddb/radiusd.conf logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /usr/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/etc/raddb/radiusd.conf pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/etc/raddb/radiusd.conf Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/etc/raddb/radiusd.conf mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_pam Module: Instantiating module "pam" from file /usr/etc/raddb/radiusd.conf pam { pam_auth = "radiusd-auth" } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/etc/raddb/radiusd.conf unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap1" from file /usr/etc/raddb/radiusd.conf ldap ldap1 { server = "ldap.server" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=domain,dc=com" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = no } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap1-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap1-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap1 rlm_ldap: reading ldap<->radius mappings from file /usr/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x13fb4be0 Module: Instantiating module "ldap2" from file /usr/etc/raddb/radiusd.conf ldap ldap2 { server = "secondary.ldap.server" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=domain,dc=com" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = no } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap2-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap2-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap2 rlm_ldap: reading ldap<->radius mappings from file /usr/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x13fb66e0 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/etc/raddb/certs/server.pem" certificate_file = "/usr/etc/raddb/certs/server.pem" CA_file = "/usr/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/etc/raddb/certs/dh" random_file = "/usr/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/etc/raddb/certs/bootstrap" } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/etc/raddb/radiusd.conf realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/etc/raddb/radiusd.conf files { usersfile = "/usr/etc/raddb/users" acctusersfile = "/usr/etc/raddb/acct_users" preproxy_usersfile = "/usr/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/etc/raddb/radiusd.conf radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /usr/etc/raddb/radiusd.conf attr_filter attr_filter.access_reject { attrsfile = "/usr/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /usr/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/etc/raddb/radiusd.conf preprocess { huntgroups = "/usr/etc/raddb/huntgroups" hints = "/usr/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/etc/raddb/radiusd.conf acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/etc/raddb/radiusd.conf detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_ippool Module: Instantiating module "some_pool" from file /usr/etc/raddb/radiusd.conf <SNIP> } Module: Instantiating module "attr_filter.accounting_response" from file /usr/etc/raddb/radiusd.conf attr_filter attr_filter.accounting_response { attrsfile = "/usr/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.7.1 port 1645, id=225, length=97 Framed-Protocol = PPP User-Name = "ldaptest" User-Password = "testing" NAS-Port-Type = Virtual NAS-Port = 241 NAS-Port-Id = "Uniq-Sess-ID241" Service-Type = Framed-User NAS-IP-Address = 192.168.bogus # Executing section authorize from file /usr/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++- entering group LDAP {...} [ldap1] performing user authorization for ldaptest [ldap1] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap1] ... expanding second conditional [ldap1] expand: %{User-Name} -> ldaptest [ldap1] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=ldaptest) [ldap1] expand: dc=domain,dc=com -> dc=domain,dc=com [ldap1] ldap_get_conn: Checking Id: 0 [ldap1] ldap_get_conn: Got Id: 0 [ldap1] attempting LDAP reconnection [ldap1] (re)connect to ldap.server:389, authentication 0 [ldap1] bind as / to ldap.server:389 [ldap1] waiting for bind result ... [ldap1] Bind was successful [ldap1] performing search in dc=domain,dc=com, with filter (uid=ldaptest) [ldap1] looking for check items in directory... [ldap1] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap1] user ldaptest authorized to use remote access [ldap1] ldap_release_conn: Release Id: 0 +++[ldap1] returns ok ++- group LDAP returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns updated [files] users: Matched entry DEFAULT at line 237 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = LDAP # Executing group from file /usr/etc/raddb/sites-enabled/default +- entering group authenticate {...} ++- entering group LDAP {...} [ldap1] login attempt by "ldaptest" with password "testing" [ldap1] user DN: uid=ldaptest,ou=People,dc=domain,dc=com [ldap1] (re)connect to ldap.server:389, authentication 1 [ldap1] bind as uid=ldaptest,ou=People,dc=domain,dc=com/testing to ldap.server:389 [ldap1] waiting for bind result ... [ldap1] Bind was successful [ldap1] user ldaptest authenticated succesfully +++[ldap1] returns ok ++- group LDAP returns ok Login OK: [ldaptest] (from client cisco_pptp port 241) # Executing section post-auth from file /usr/etc/raddb/sites-enabled/default +- entering group post-auth {...} [medium_pool] Could not find Pool-Name attribute. ++[medium_pool] returns noop [super_pool] Could not find Pool-Name attribute. ++[super_pool] returns noop [student_pool] Could not find Pool-Name attribute. ++[student_pool] returns noop [euro_pool] Could not find Pool-Name attribute. ++[euro_pool] returns noop ++[exec] returns noop Sending Access-Accept of id 225 to 192.168.Bogus port 1645 Framed-Protocol == PPP Framed-Compression = Van-Jacobson-TCP-IP Cisco-AVPair = "ip:addr-pool=vpnpool" Finished request 0.

4 13

Pass cleartext-password to exec module with EAP
by Quentin Meulepas 03 Mar '12

03 Mar '12

Hi! I need to use an external script to check both username and password. We don't have the cleartext version of these passwords, which are encrypted in a Postresql database... Although I'm running into troubles with the configuration files... And there's one major issue I can't seem to solve : EAP. I don't know how to pass the cleartext version of the entered password to the external script from the inner-tunnel of the EAP process. Could anybody help me on this? Thanks!

2 1

FreeRADIUS 2.1.12 as DHCPd with both static and dynamic IP-MAC via SQL
by newuse＠qip.ru 03 Mar '12

03 Mar '12

Hi all, Again questions about FR as DHCP server with SQ: Is it possible to setup FR as  DHCPd on FreeBSD to a given interface or it's IP? Could I use rlm_sqlpool to store MAC-IP associations? I am trying to use an old dial-up  module (FreeNIBS) for my WiFi network, all seems to be OK,  but there is no DHCP,

2 1

FreeRadius-supported Billing System?
by Nick 03 Mar '12

03 Mar '12

Hi all. I'm developing a VPN service (with FreeRadius and MySQL as backend) and wanted to know if there's any customer/billing management solutions that support FreeRadius before I go and write my own. I haven't really been able to find anything other than maybe Platypus and a plugin for WHMCS... What solutions are out there that might be appropriate? (commercial is ok). Could I maybe adapt some of the more WISP-oriented solutions to my needs? Thanks in advance,, Nick

2 1

Pass cleartext-password to exec module with EAP
by Quentin Meulepas 03 Mar '12

03 Mar '12

Hi! I need to use an external script to check both username and password. We don't have the cleartext version of these passwords, which are encrypted in a Postresql database... Although I'm running into troubles with the configuration files... And there's one major issue I can't seem to solve : EAP. I don't know how to pass the cleartext version of the entered password to the external script from the inner-tunnel of the EAP process. Could anybody help me on this? Thanks!

2 1