- Freeradius-Users - lists.freeradius.org

Authentication according NAS
by ebrnospam＠free.fr 06 Feb '12

06 Feb '12

Hello, I've got this infrastructure : FACTORY 1 NAS1 NAS2 NAS3 FACTORY 2 NAS1 NAS2 NAS3 NAS4 I just want this : user admin with password toto could connect to NAS1/2/3/4 of Factory2 user admin with password coco could connect to NAS1/2/3 of Factory1 or if it's more simple : user admin could connect to NAS1/2/3/4 of Factory2 and NAS1/2/3 of Factory1 user adm_f1 could connect to NAS1/2/3 of Factory1 but can't connect to NAS of Factory2 user adm_f2 could connect to NAS1/2/3/4 of Factory2 but can't connect to NAS of Factory1 How can I do that ? Thanks Eric

2 1

More than one client
by Miha Zoubek 06 Feb '12

06 Feb '12

Hi, I need a few information. We have to softswtichs, both are working with freeradius perfectly. There is no problem to use to different clinets (softswitchs) to use one freeradious server. Problem is that softswitchs would need a different dialup.conf (for sql entry) and different default configuration for different AVP packets. How to set to different dialup.conf and defult configuration? Thanks! Miha -- Best regards / Lep Pozdrav Miha Zoubek Softnet d.o.o.

3 3

Eduroam F-ticks and syslog
by Andranik Hayrapetyan 06 Feb '12

06 Feb '12

Good day, I am configuring FreeRadius to be an Eduroam FRL. I created module f_ticks which contains the following: linelog f_ticks { filename = syslog format = "This is a log message for %{User-Name}" reference = "f_ticks.%{%{reply:Packet-Type}:-format}" f_ticks { Access-Accept = "F-TICKS/eduroam/1.0#REALM=%{Realm}#VISCOUNTRY=AM#CSI=%{Calling-Station-Id}#RESULT=OK#" Access-Reject = "F-TICKS/eduroam/1.0#REALM=%{Realm}#VISCOUNTRY=AM#CSI=%{Calling-Station-Id}#RESULT=FAIL#" } } It sends f-ticks to syslog, and syslog place f-ticks in /var/log/massage withe many other log information. How can I set here facility for syslog (local0 eg.) , to be able to control the f-ticks and place them to the file I want or send to eduroam f-ticks server???

3 2

Multiple servers using Realms.
by Jan Hugo Prins 06 Feb '12

06 Feb '12

Hi everyone, Last week I started using Radius because I need authentication for a wireless setup with EAP / MSCHAPV2 againts users that are in LDAP. This works fine with all the different examples I found. But now I'm reading the documentation and I get the impression from the REALM stuff that I should be able to create multiple parallel server instances in one configuration. What I need to do on one server is the following: I have a Aruba wireless setup which gives me the option to create multiple virtual wireless accesspoints. On VAP1 I want to authenticate users from domain1. These users all have a full LDAP account and authentication works fine against this LDAP. I have configured this and everyone can login using it's mailLocalAddress attribute for authentication and the radius server is using the credentials you give it to try to bind to LDAP and if this is successful you are granted access to the Wireless accesspoint for domain1. On VAP2 I want to authenticate users from domain2. These users are all in an ADS and my radius server probably has to proxy to this ADS for authentication. Am I right their? On VAP3 I have a different customer. This customer is in a different OU in the same openldap server as the users on VAP1. I need to isolate the 2 sets of users and in the configuration for VAP1 I have put the Base for the LDAP search inside the OU of these users, that way other customers are not able to authenticate against this setup. For the users in VAP3 I have to create a different LDAP connection in the Radius server that points to the OU for this company. Can this indeed be done in one radius server configuration? Or do I need multiple servers to do this. If this is possible does someone have some pointers for me and maybe some example configurations? -- Met vriendelijke groet, Jan Hugo Prins E: jhp(a)jhprins.org

3 2

Design question
by Dan Letkeman 04 Feb '12

04 Feb '12

Hello, I'm new to using radius servers and I have a few questions on best practices and design. We primarily use windows 7 on the machines that will authenticate, and they are all connected to cisco switches and access points. If I understand things correctly I have the option of authenticating based on users, certificates or users and certificates. In our environment I don't see the need to add users into the mix as almost all of the machines are shared machines where multiple users will authenticate on the same machines. We also push applications to the machines when users are not logged into them so we need the computer to authenticate on its own when it boots up. >From what I understand I need to create myself a certificate and install that certificate into the freeradius server and into each of my client computers. Then I need to configure my switches to connect use the freeradius server to allow the traffic through when the client computer wants to authenticate to the network. As far as the switches goes I don't have any questions, its fairly straight forward. My questions are as follows: Which EAP type should I use if I only want the computers to authenticate using certificates? EAP-TLS? I am guessing I should be using WPA2/Enterprise on the clients for the 802.1x authentication on the Windows 7 clients? And set it to use computer authentication only? Do I need a signed third party certificate or can I use a self signed one? Could a user not just export the certificate from the computer and import it into there own computer, configure there network settings and get on the network? Or is there a mechanism to keep people from doing this? Perhaps a password encrypted in the certificate? Is there anything else I am missing? Thanks, Dan.

7 12

Problems sending session-timeout
by tonimanel 03 Feb '12

03 Feb '12

Hi guys, I have a problem with my freeradius service. I would like to get that freeradius sends to my NAS the session-timeout attribute. Can you tell my how could I get it? This is the output result: FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 14 2010 at 20:41:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/sql/mysql/counter.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 50 reject_delay = 3 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "19m_K28hespggeR" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 8 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0000-00-00 00:00:00', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): starting 5 rlm_sql (sql): Attempting to connect rlm_sql_mysql #5 rlm_sql_mysql: Starting connect to MySQL server for #5 rlm_sql (sql): Connected new DB handle, #5 rlm_sql (sql): starting 6 rlm_sql (sql): Attempting to connect rlm_sql_mysql #6 rlm_sql_mysql: Starting connect to MySQL server for #6 rlm_sql (sql): Connected new DB handle, #6 rlm_sql (sql): starting 7 rlm_sql (sql): Attempting to connect rlm_sql_mysql #7 rlm_sql_mysql: Starting connect to MySQL server for #7 rlm_sql (sql): Connected new DB handle, #7 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserving sql socket id: 7 rlm_sql (sql): Read entry nasname=80.26.102.157,shortname=NataliWifi,secret=sj6bo5RdYsmME@uyf8yuTq9x4SVb39 rlm_sql (sql): Adding client 80.26.102.157 (NataliWifi, server=<none>) to clients list rlm_sql (sql): Read entry nasname=0.0.0.0/0,shortname=FaberWifi,secret=62p@%5RdYsmME@uyf8yuTq9x4SVb39 rlm_sql (sql): Adding client 0.0.0.0 (FaberWifi, server=<none>) to clients list rlm_sql (sql): Read entry nasname=213.0.2.116,shortname=WifiPoint,secret=Mb6xUH14yXK27F1d rlm_sql (sql): Adding client 213.0.2.116 (WifiPoint, server=<none>) to clients list rlm_sql (sql): Read entry nasname=80.36.217.106,shortname=PamadiWifi,secret=mk5mk5RdYsmME@uyf8yuTq9x4SVb39 rlm_sql (sql): Adding client 80.36.217.106 (PamadiWifi, server=<none>) to clients list rlm_sql (sql): Read entry nasname=213.97.154.93,shortname=PamadiWifiArenas,secret=mk6ml5RdYsmME@uyf8yuTq9x4SVb39 rlm_sql (sql): Adding client 213.97.154.93 (PamadiWifiArenas, server=<none>) to clients list rlm_sql (sql): Released sql socket id: 7 Module: Linked to module rlm_sqlcounter Module: Instantiating module "unuso" from file /etc/freeradius/sql/mysql/counter.conf sqlcounter unuso { counter-name = "One-All-Session-Time" check-name = "One-All-Session" key = "User-Name" sqlmod-inst = "sql" query = "SELECT UNIX_TIMESTAMP()-UNIX_TIMESTAMP(AcctStartTime) FROM radacct WHERE UserName='%{%k}' ORDER BY AcctStartTime LIMIT 1" reset = "never" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sqlcounter: Reply attribute set to Session-Timeout. rlm_sqlcounter: Counter attribute One-All-Session-Time is number 11273 rlm_sqlcounter: Check attribute One-All-Session is number 11274 rlm_sqlcounter: Current Time: 1327590641 [2012-01-26 16:10:41], Next reset 0 [2012-01-26 16:00:00] rlm_sqlcounter: Current Time: 1327590641 [2012-01-26 16:10:41], Prev reset 0 [2012-01-26 16:00:00] Module: Instantiating module "noresetcounter" from file /etc/freeradius/sql/mysql/counter.conf sqlcounter noresetcounter { counter-name = "Max-All-Session-Time" check-name = "Max-All-Session" key = "User-Name" sqlmod-inst = "sql" query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'" reset = "never" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sqlcounter: Reply attribute set to Session-Timeout. rlm_sqlcounter: Counter attribute Max-All-Session-Time is number 11275 rlm_sqlcounter: Check attribute Max-All-Session is number 11276 rlm_sqlcounter: Current Time: 1327590641 [2012-01-26 16:10:41], Next reset 0 [2012-01-26 16:00:00] rlm_sqlcounter: Current Time: 1327590641 [2012-01-26 16:10:41], Prev reset 0 [2012-01-26 16:00:00] Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Ready to process requests. rad_recv: Access-Request packet from host 217.127.52.231 port 50992, id=16, length=121 User-Name = "nu533GIDU" Acct-Session-Id = "1327590646R21kln" NAS-IP-Address = 127.0.0.1 NAS-Identifier = "Localhost" NAS-Port = 0 Calling-Station-Id = "demohotspot" User-Password = "XIWOVA42" Message-Authenticator = 0x9a2efd35607129a6faab0f5a1fd93c47 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [sql] expand: %{User-Name} -> nu533GIDU [sql] sql_set_user escaped user --> 'nu533GIDU' rlm_sql (sql): Reserving sql socket id: 6 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'nu533GIDU' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'nu533GIDU' ORDER BY id [sql] expand: SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM usergroup WHERE username = 'nu533GIDU' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'pruebasibi20min' ORDER BY id [sql] User found in group pruebasibi20min [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'pruebasibi20min' ORDER BY id rlm_sql (sql): Released sql socket id: 6 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[unuso] returns noop rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{User-Name}'' [noresetcounter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='nu533GIDU' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='nu533GIDU'}' [noresetcounter] sql_xlat [noresetcounter] expand: %{User-Name} -> nu533GIDU [noresetcounter] sql_set_user escaped user --> 'nu533GIDU' [noresetcounter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='nu533GIDU' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='nu533GIDU' rlm_sql (sql): Reserving sql socket id: 5 [noresetcounter] row[0] returned NULL rlm_sql (sql): Released sql socket id: 5 [noresetcounter] expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='nu533GIDU'} -> rlm_sqlcounter: No integer found in string "" ++[noresetcounter] returns noop ++[pap] returns updated Found Auth-Type = PAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! # Executing group from file /etc/freeradius/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "XIWOVA42" [pap] Using clear text password "XIWOVA42" [pap] User authenticated successfully ++[pap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 16 to 217.127.52.231 port 50992 Acct-Interim-Interval := 600 Idle-Timeout := 300 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 16 with timestamp +4 Ready to process requests. /*****************************************************************************/ I hope your suggestions. Thanks. Regards, Toni. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Problems-sending-session-timeout-tp… Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 17

Auth Problem
by Fazal Ahmed Malik 03 Feb '12

03 Feb '12

Dear List, I have been using Freeradius for couple of years. Freeradius is installed on FreeBSD with mpd. All is working fine with Mac based Calling-station. I have problem with one username. With that particular user nothing works I mean he can bypass password, expiration and calling-station. Rest all users denied access if their expiration date reached or accessing from un authorized MAC. I am unable to control that particular user. Any help will be appreciated. Best regards, Fazal Ahmed Malik

2 2

Newbie and Sqlippool
by Antonio Modesto 03 Feb '12

03 Feb '12

Hi, I am trying to test sqlippool on freeradius, but i've found that the documentation explains very well how to implement it, but it doesn't explain very well how I can set a user or a group to use this pool. Can someone explain me how can I do this? i've set up a pool called 'main_pool' in my database: select * from radippool; +----+-----------+-----------------+--------------+-----------------+------------------+---------------------+----------+----------+ | id | pool_name | FramedIPAddress | NASIPAddress | CalledStationId | CallingStationID | expiry_time | username | pool_key | +----+-----------+-----------------+--------------+-----------------+------------------+---------------------+----------+----------+ | 1 | main_pool | 172.16.254.1 | | | | 0000-00-00 00:00:00 | | | +----+-----------+-----------------+--------------+-----------------+------------------+---------------------+----------+----------+ 1 row in set (0.01 sec) and I have this user: select * from radcheck; +----+----------+---------------+----+-------+-------+ | id | UserName | Attribute | op | Value | ativo | +----+----------+---------------+----+-------+-------+ | 1 | modesto | User-Password | == | 12345 | S | +----+----------+---------------+----+-------+-------+ 1 row in set (0.00 sec) I've already tried to associate the Pool-Name attribute with this user, but it didn't work. Can someone explain me how this stuff works or send me a more detailed documentation? Thanks in advance. Regards.

3 14

Verifying you are Joining the Active Directory Domain
by Gilmour, Scott 02 Feb '12

02 Feb '12

Hi, I was able to figure out my clock skew issue. I had to go to regedit on my 2008 Server and goto: HKEY_LOCAL_MACHINE>SYSTEM>Current Control Set>services>W32Time> Parameters Then select NTP Server to change the server address ip and change the Type to NTP I was able to join the domain correctly and from what I Understand I should see it added as A computer on my Windows 2008 Server PC. But when I do a wbinfo -u I do not see my domain users listed. I was wondering if this is because we installed winbind4 rather than winbind? Thanks for everyones help, Scott root@FreeRadius:/etc/init.d# net ads testjoin Join is OK root@FreeRadius:/etc/init.d# net ads info LDAP server: 20.1.180.55 LDAP server name: 2008ServerR2.SQA.net Realm: SQA.NET Bind Path: dc=SQA,dc=NET LDAP port: 389 Server time: Thu, 02 Feb 2012 09:27:31 EST KDC server: 20.1.180.55 Server time offset: -124 root@FreeRadius:/etc/init.d# wbinfo -u Error looking up domain users root@FreeRadius:/etc/init.d#

4 3

2008 Server Certificate Authority
by Gilmour, Scott 02 Feb '12

02 Feb '12

Hi, I have a 2008 Server Certificate Authority. I want to use my 2008 Server Certificates with my FreeRadius Server. I have been searching online but haven't found anything that fully explains how to accomplish this. I know I will need to use openssl to accomplish this. Does anybody know of a good site or even a book that would explain how to accomplish this tasks. If somebody can point me in the right direction that would be great. Thanks Scott

2 1