- Freeradius-Users - lists.freeradius.org

Fwd: failure log from radius debug
by Jim Pazarena 01 Dec '11

01 Dec '11

please diagnose why radius feels that my server has declined the user/password? both these user attempts used their correct password, yet the log says it was invalid. Thanks! -------- Original Message -------- Subject: failure log from radius debug Date: Tue, 29 Nov 2011 10:50:29 -0800 From: Charlie Root To: jim(a)paz.bz Tue Nov 29 10:42:30 2011 : Info: Ready to process requests. rad_recv: Access-Request packet from host 209.53.238.13 port 513, id=118, length=95 User-Name = "carlmerk" User-Password = "mushXX" NAS-Port = 15 NAS-Port-Type = Async NAS-Identifier = "ras" Called-Station-Id = "unknown" Calling-Station-Id = "unknown" Service-Type = Framed-User Framed-Protocol = PPP Tue Nov 29 10:44:13 2011 : Info: # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:13 2011 : Info: +- entering group authorize {...} Tue Nov 29 10:44:13 2011 : Info: ++[preprocess] returns ok Tue Nov 29 10:44:13 2011 : Info: ++[chap] returns noop Tue Nov 29 10:44:13 2011 : Info: ++[mschap] returns noop Tue Nov 29 10:44:13 2011 : Info: ++[digest] returns noop Tue Nov 29 10:44:13 2011 : Info: [suffix] No '@' in User-Name = "carlmerk", looking up realm NULL Tue Nov 29 10:44:13 2011 : Info: [suffix] No such realm "NULL" Tue Nov 29 10:44:13 2011 : Info: ++[suffix] returns noop Tue Nov 29 10:44:13 2011 : Info: [eap] No EAP-Message, not doing EAP Tue Nov 29 10:44:13 2011 : Info: ++[eap] returns noop Tue Nov 29 10:44:13 2011 : Info: [files] users: Matched entry DEFAULT at line 50 Tue Nov 29 10:44:13 2011 : Info: ++[files] returns ok Tue Nov 29 10:44:13 2011 : Info: ++[expiration] returns noop Tue Nov 29 10:44:13 2011 : Info: ++[logintime] returns noop Tue Nov 29 10:44:13 2011 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Tue Nov 29 10:44:13 2011 : Info: ++[pap] returns noop Tue Nov 29 10:44:13 2011 : Info: Found Auth-Type = System Tue Nov 29 10:44:13 2011 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:13 2011 : Info: +- entering group authenticate {...} Tue Nov 29 10:44:13 2011 : Auth: [unix] invalid password "carlmerk" Tue Nov 29 10:44:13 2011 : Info: ++[unix] returns reject Tue Nov 29 10:44:13 2011 : Info: Failed to authenticate the user. Tue Nov 29 10:44:13 2011 : Auth: Login incorrect: [carlmerk/mushXX] (from client localhost port 15 cli unknown) Tue Nov 29 10:44:13 2011 : Info: Using Post-Auth-Type Reject Tue Nov 29 10:44:13 2011 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:13 2011 : Info: +- entering group REJECT {...} Tue Nov 29 10:44:13 2011 : Info: [attr_filter.access_reject] expand: %{User-Name} -> carlmerk Tue Nov 29 10:44:13 2011 : Debug: attr_filter: Matched entry DEFAULT at line 11 Tue Nov 29 10:44:13 2011 : Info: ++[attr_filter.access_reject] returns updated Tue Nov 29 10:44:13 2011 : Info: Delaying reject of request 0 for 1 seconds Tue Nov 29 10:44:13 2011 : Debug: Going to the next request Tue Nov 29 10:44:13 2011 : Debug: Waking up in 0.9 seconds. Tue Nov 29 10:44:14 2011 : Info: Sending delayed reject for request 0 Sending Access-Reject of id 118 to 209.53.238.13 port 513 Tue Nov 29 10:44:14 2011 : Debug: Waking up in 4.9 seconds. Tue Nov 29 10:44:19 2011 : Info: Cleaning up request 0 ID 118 with timestamp +103 Tue Nov 29 10:44:19 2011 : Info: Ready to process requests. rad_recv: Access-Request packet from host 209.53.238.13 port 513, id=119, length=95 User-Name = "carollyn" User-Password = "carolXX" NAS-Port = 2 NAS-Port-Type = Async NAS-Identifier = "ras" Called-Station-Id = "unknown" Calling-Station-Id = "unknown" Service-Type = Framed-User Framed-Protocol = PPP Tue Nov 29 10:44:20 2011 : Info: # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:20 2011 : Info: +- entering group authorize {...} Tue Nov 29 10:44:20 2011 : Info: ++[preprocess] returns ok Tue Nov 29 10:44:20 2011 : Info: ++[chap] returns noop Tue Nov 29 10:44:20 2011 : Info: ++[mschap] returns noop Tue Nov 29 10:44:20 2011 : Info: ++[digest] returns noop Tue Nov 29 10:44:20 2011 : Info: [suffix] No '@' in User-Name = "carollyn", looking up realm NULL Tue Nov 29 10:44:20 2011 : Info: [suffix] No such realm "NULL" Tue Nov 29 10:44:20 2011 : Info: ++[suffix] returns noop Tue Nov 29 10:44:20 2011 : Info: [eap] No EAP-Message, not doing EAP Tue Nov 29 10:44:20 2011 : Info: ++[eap] returns noop Tue Nov 29 10:44:20 2011 : Info: [files] users: Matched entry DEFAULT at line 50 Tue Nov 29 10:44:20 2011 : Info: ++[files] returns ok Tue Nov 29 10:44:20 2011 : Info: ++[expiration] returns noop Tue Nov 29 10:44:20 2011 : Info: ++[logintime] returns noop Tue Nov 29 10:44:20 2011 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Tue Nov 29 10:44:20 2011 : Info: ++[pap] returns noop Tue Nov 29 10:44:20 2011 : Info: Found Auth-Type = System Tue Nov 29 10:44:20 2011 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:20 2011 : Info: +- entering group authenticate {...} Tue Nov 29 10:44:20 2011 : Auth: [unix] invalid password "carollyn" Tue Nov 29 10:44:20 2011 : Info: ++[unix] returns reject Tue Nov 29 10:44:20 2011 : Info: Failed to authenticate the user. Tue Nov 29 10:44:20 2011 : Auth: Login incorrect: [carollyn/carolXX] (from client localhost port 2 cli unknown) Tue Nov 29 10:44:20 2011 : Info: Using Post-Auth-Type Reject Tue Nov 29 10:44:20 2011 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Tue Nov 29 10:44:20 2011 : Info: +- entering group REJECT {...} Tue Nov 29 10:44:20 2011 : Info: [attr_filter.access_reject] expand: %{User-Name} -> carollyn Tue Nov 29 10:44:20 2011 : Debug: attr_filter: Matched entry DEFAULT at line 11 Tue Nov 29 10:44:20 2011 : Info: ++[attr_filter.access_reject] returns updated Tue Nov 29 10:44:20 2011 : Info: Delaying reject of request 1 for 1 seconds Tue Nov 29 10:44:20 2011 : Debug: Going to the next request Tue Nov 29 10:44:20 2011 : Debug: Waking up in 0.9 seconds. Tue Nov 29 10:44:21 2011 : Info: Sending delayed reject for request 1 Sending Access-Reject of id 119 to 209.53.238.13 port 513 Tue Nov 29 10:44:21 2011 : Debug: Waking up in 4.9 seconds. Tue Nov 29 10:44:26 2011 : Info: Cleaning up request 1 ID 119 with timestamp +110 Tue Nov 29 10:44:26 2011 : Info: Ready to process requests. ^\Quit auth# ^Dexit Script done on Tue Nov 29 10:44:31 2011

6 15

Error: Failed to send packet; No response from Server
by suggestme 30 Nov '11

30 Nov '11

Hi, I was successful to install Freeradius 2.1.10 and basic PAP authentication, Authentication against Active Directory was successful when I installed Freeradius for first time. But I had to deinstall and reinstall Freeradius 2.1.10 again due to some missing libraries. I am following the same deployingradius.com site for basic testing. I can start the server in debugging mode successfully using radiusd -X, which shows "Ready to process requests". But while doing basic radtest for PAP authentication it gives error: radclient: Failed to send packet for ID 85: (unknown error) radclient: no response from server for ID 85 socket 3 The last part of debug mode output when I run radiusd -X is: radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. The error I got using radtest is as follows: #radtest bob hello localhost 0 testing123 Sending Access-Request of id 85 to 127.0.0.1 port 1812 User-Name = "bob" User-Password = "hello" NAS-IP-Address = *This is ommitted for privacy, It shows my radius server IP address* NAS-Port = 0 radclient: Failed to send packet for ID 85: (unknown error) Sending Access-Request of id 85 to 127.0.0.1 port 1812 User-Name = "bob" User-Password = "hello" NAS-IP-Address = *This is ommitted for privacy, It shows my radius server IP address* NAS-Port = 0 radclient: Failed to send packet for ID 85: (unknown error) Sending Access-Request of id 85 to 127.0.0.1 port 1812 User-Name = "bob" User-Password = "hello" NAS-IP-Address = *This is ommitted for privacy, It shows my radius server IP address* NAS-Port = 0 radclient: Failed to send packet for ID 85: (unknown error) radclient: no response from server for ID 85 socket 3 I was successful to do basic PAP authentication, and also authentication against active directory before. But this time I am getting this error. Can anyone please tell me what might be wrong. Thanks, -- View this message in context: http://freeradius.1045715.n5.nabble.com/Error-Failed-to-send-packet-No-resp… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

run radius in debug mode with screen
by Коньков Евгений 30 Nov '11

30 Nov '11

while using this verion FreeRADIUS Version 2.1.3, for host i386-portbld-freebsd7.1, built on Jan 6 2009 at 10:52:08 I can run radius as /usr/local/bin/screen -d -m /usr/bin/nice -n -20 /r/radiusd debug but with FreeRADIUS Version 2.1.10, for host i386-portbld-freebsd9.0, built on Nov 28 2011 at 00:20:11 it exit without any messages. Can you help me please to resolve this problem? -- С уважением, Коньков mailto:kes-kes@yandex.ru

2 1

Connection Lost, tls resumption error
by Andreas Rudat 30 Nov '11

30 Nov '11

Hi, in my enviroment I got three AP's runnning, all with the same essid, after a while the connection seems lost and a reconnection starts to another AP and then I get the resumption error but I have no idea why I lost the connection. No Errors in radius debug and a good reception is given. The resumption error can be only avoid with restarting the wirless device. Thanks

3 3

Re: HELP!!! Error: rlm_eap: SSL error
by Alan Buxey 30 Nov '11

30 Nov '11

you can create a new RADIUS cert whenever you want. Just ensure its signed by same CA and has same details such as CN . If you want to change CA then client config changes will be needed (likewise for CN changes) ...that assumes the clients were configured properly/securely. If its just a client cert (EAP-TLS) then just give the client a new one alan

1 0

Re: HELP!!! Error: rlm_eap: SSL error
by Victor Guk 30 Nov '11

30 Nov '11

29.11.2011 19:54, freeradius-users-request(a)lists.freeradius.org пишет: > options: > > client has wrong certificate > client has wrong date/time set on it > certificate has expired > > alan The time is set correctly. Certificate has expired. Can I renew it without breaking. Or to create a new one?

1 0

struggling getting freeradius to authorize a dialup session
by Jim Pazarena 29 Nov '11

29 Nov '11

I am confused, as to the layout of the users file. I have a simple: DEFAULT Auth-Type = System Service-Type = Framed-User, Framed-Protocol = PPP, Framed-MTU = 1500 yet, when I start radius (in debug), and attempt a dial-in, it nags the following: WARNING: Empty authorize section. Using default return values. ERROR: No authenticate method (Auth-Type) founf for the request: Rejecting the user So the WARNING is clear enough, but I am getting lost in setup files. the "sites-available/README" suggests that on a simply setup, everything can be in the radiusd.conf file; I don't see anything in my radiusd.conf which suggests an authenticate section. I could post the radiusd.conf, but would like permission (first). Thanks! -- Jim Pazarena work:250 559-7777 Box 550 - 405 2nd Avenue fax: 866 279-3608 Queen Charlotte BC V0T 1S0 mailto:jim@paz.bz

2 3

Re: struggling getting freeradius to authorize a dialup session
by Alan Buxey 29 Nov '11

29 Nov '11

radiusd -X Default install will work. Ensure you have at least 'default' virtual server in sites-enabled alan -- Message may be brief as it has been sent from my mobile

1 0

HELP!!! Error: rlm_eap: SSL error
by Victor Guk 29 Nov '11

29 Nov '11

what's wrong? Help! Tue Nov 29 17:14:00 2011 : Auth: Login incorrect: [host/dbu14/<via Auth-Type = EAP>] (from client private-network port 123 cli 00-0E-A6-B4-43-99) Tue Nov 29 17:16:02 2011 : Error: --> verify error:num=10:certificate has expired Tue Nov 29 17:16:02 2011 : Error: TLS Alert write:fatal:certificate expired Tue Nov 29 17:16:02 2011 : Error: TLS_accept:error in SSLv3 read client certificate B Tue Nov 29 17:16:02 2011 : Error: rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned

3 2

Free radius authentication with AD using ldap
by Vikashgounder 28 Nov '11

28 Nov '11

This post has NOT been accepted by the mailing list yet. Hi, Would greatly someone's help on this. I need free radius to authenticate with using wpa. >From the local radtest I can see, it is authenticating fine but when testing with a wpa device, this is the error m getting on the debug log: I just need it to work from wireless device, I think it is the eap.conf part. Would greatly appreciate someone's help on this::: FreeRADIUS Debugging Output This colorized output was produced by an automated tool from Network RADIUS FreeRADIUS Version 2.1.7, for host x86_64-redhat-linux-gnu, built on Mar 31 2010 at 00:14:28 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/OLD_ldap-ORIG including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no msg_badpass = "Host %n" msg_goodpass = "Host %n" } security { max_attributes = 200 reject_delay = 3 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" shortname = "localhost" nastype = "other" } client 10.38.0.3 { require_message_authenticator = no secret = "EduroamACUwlan" shortname = "acubluecoat" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "acustaff.acu.edu.au" port = 3268 password = "9yRD1133" identity = "cn=Radauth,cn=Users,dc=acustaff,dc=acu,dc=edu,dc=au" net_timeout = 1 timeout = 20 timelimit = 20 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=acu,dc=edu,dc=au" filter = "(&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}}))" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" groupmembership_attribute = "memberOf" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1e9ceee0 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. Packet 0 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=237, length=236 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x0201000e01756c64617074657374 Message-Authenticator = 0x60f3efa9af61cb0e0f5ad8534f494671 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:13 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [ldap] performing user authorization for uldaptest [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest)) [ldap] expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to acustaff.acu.edu.au:3268, authentication 0 rlm_ldap: bind as cn=Radauth,cn=Users,dc=acustaff,dc=acu,dc=edu,dc=au/9yRD1133 to acustaff.acu.edu.au:3268 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest)) [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user uldaptest authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 237 to 10.38.0.3 port 32769 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160c7aefab29789ce03c2fa122 Finished request 0. Going to the next request Waking up in 4.9 seconds. Packet 1 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=238, length=392 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x0202009819800000008e16030100890100008503014ed31073 ... State = 0x0c78f6160c7aefab29789ce03c2fa122 Message-Authenticator = 0x562b36ca8df14283f8e01ac8ac63a3c6 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:13 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08ec], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 238 to 10.38.0.3 port 32769 EAP-Message = 0x0103040019c00000093016030100310200002d03014ed31071 ... EAP-Message = 0x22302006035504031319414355204365727469666963617465 ... EAP-Message = 0x00c51ed7ac80a20c32a6ef4bef301af76f54a9c4418ea270ad ... EAP-Message = 0xc8d5d9550203010001a317301530130603551d25040c300a06 ... EAP-Message = 0x8a2c7cd3db55a0a340e6b03d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160d7befab29789ce03c2fa122 Finished request 1. Going to the next request Waking up in 4.9 seconds. Packet 2 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=239, length=246 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x020300061900 State = 0x0c78f6160d7befab29789ce03c2fa122 Message-Authenticator = 0x7be3f3e3ed49355a492cd374601855d2 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:13 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 239 to 10.38.0.3 port 32769 EAP-Message = 0x010403fc1940200c8fc5aa47d15440082858eca603fd5a1969 ... EAP-Message = 0x746966696361746520417574686f72697479301e170d313131 ... EAP-Message = 0x82010a0282010100a511292c7b417649db9c0f5cdd107a7df5 ... EAP-Message = 0x1384fd317e150826ed17d50203010001a38201183082011430 ... EAP-Message = 0x2043657274696669 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160e7cefab29789ce03c2fa122 Finished request 2. Going to the next request Waking up in 4.9 seconds. Packet 3 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=240, length=246 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x020400061900 State = 0x0c78f6160e7cefab29789ce03c2fa122 Message-Authenticator = 0x5546f673ea00a405faa28720e9f6ab76 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:13 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 240 to 10.38.0.3 port 32769 EAP-Message = 0x0105014a19006361746520417574686f726974798209009f5c ... EAP-Message = 0xd6e0fee86621f984bd730d2494704b554e1aa8baad5c4f1c2c ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160f7defab29789ce03c2fa122 Finished request 3. Going to the next request Waking up in 4.9 seconds. Packet 4 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=241, length=578 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x020501501980000001461603010106100001020100960b620f ... EAP-Message = 0x050369c4597e0b74b7983fe6d4d126932cb6a14da376e61414 ... State = 0x0c78f6160f7defab29789ce03c2fa122 Message-Authenticator = 0xc5cf2ebf2d560e1cc00f06b96305c7b5 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:13 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 241 to 10.38.0.3 port 32769 EAP-Message = 0x0106004119001403010001011603010030d7894bd4d1fdda80 ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f616087eefab29789ce03c2fa122 Finished request 4. Going to the next request Waking up in 4.8 seconds. Packet 5 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=242, length=246 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x020600061900 State = 0x0c78f616087eefab29789ce03c2fa122 Message-Authenticator = 0xe0557ef5bb67ba6b81ab20513d65fd7f +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:14 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 242 to 10.38.0.3 port 32769 EAP-Message = 0x0107002b190017030100209de7fc5e4ae455f946e2ea4e4b18 ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f616097fefab29789ce03c2fa122 Finished request 5. Going to the next request Waking up in 4.8 seconds. Packet 6 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=243, length=283 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x0207002b1900170301002002719aa3fa2024a6c67106b383a3 ... State = 0x0c78f616097fefab29789ce03c2fa122 Message-Authenticator = 0xe782aed7aa6de93a419f5e0d745eae21 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:14 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - uldaptest [peap] Got tunneled request EAP-Message = 0x0207000e01756c64617074657374 server { PEAP: Got tunneled identity of uldaptest PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to uldaptest Sending tunneled request EAP-Message = 0x0207000e01756c64617074657374 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "uldaptest" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 149 ++[files] returns ok [ldap] performing user authorization for uldaptest [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest)) [ldap] expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest)) [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user uldaptest authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010800231a0108001e10be32d46bf3c68076eb2d8d743dadfb ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc7715fc0c779457e374c07f4d937c2f5 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010800231a0108001e10be32d46bf3c68076eb2d8d743dadfb ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc7715fc0c779457e374c07f4d937c2f5 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 243 to 10.38.0.3 port 32769 EAP-Message = 0x0108004b190017030100406a652f532ea4efc0dfd89cd91412 ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160a70efab29789ce03c2fa122 Finished request 6. Going to the next request Waking up in 4.8 seconds. Packet 7 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=244, length=347 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x0208006b19001703010060e1bcc6f75e33d9687c4b70216560 ... State = 0x0c78f6160a70efab29789ce03c2fa122 Message-Authenticator = 0xca4936007fc87868f73c635317e7c8f4 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:14 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020800441a0208003f318c683ff9a452093504a6cd5448fd55 ... server { PEAP: Setting User-Name to uldaptest Sending tunneled request EAP-Message = 0x020800441a0208003f318c683ff9a452093504a6cd5448fd55 ... FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "uldaptest" State = 0xc7715fc0c779457e374c07f4d937c2f5 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 68 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 149 ++[files] returns ok [ldap] performing user authorization for uldaptest [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest)) [ldap] expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest)) [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user uldaptest authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. expand: Host %n -> Host ?.?.?.? Login incorrect: [uldaptest] (from client acubluecoat port 0 via TLS tunnel) Host ?.?.?.? } # server inner-tunnel [peap] Got tunneled reply code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 244 to 10.38.0.3 port 32769 EAP-Message = 0x0109002b1900170301002077a23a436acd15a5f46f48e1ad3f ... Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0c78f6160b71efab29789ce03c2fa122 Finished request 7. Going to the next request Waking up in 4.8 seconds. Packet 8 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=245, length=283 User-Name = "uldaptest" Calling-Station-Id = "d0-23-db-e8-b6-01" Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076" NAS-IP-Address = 10.38.0.3 NAS-Identifier = "MAKWLC5508-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "19" EAP-Message = 0x0209002b190017030100203e380273aaacc98737e599c8b886 ... State = 0x0c78f6160b71efab29789ce03c2fa122 Message-Authenticator = 0x49fde68a41b84dab6fd1437fd478289c +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128 [auth_log] expand: %t -> Mon Nov 28 15:39:14 2011 ++[auth_log] returns ok [suffix] No '@' in User-Name = "uldaptest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. expand: Host %n -> Host 10.38.0.3 Login incorrect: [uldaptest] (from client acubluecoat port 1 cli d0-23-db-e8-b6-01) Host 10.38.0.3 Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> uldaptest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 3 seconds Going to the next request Waking up in 0.9 seconds. Waking up in 1.9 seconds. Packet 9 rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=245, length=283 Waiting to send Access-Reject to client acubluecoat port 32769 - ID: 245 Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 245 to 10.38.0.3 port 32769 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.8 seconds. Cleaning up request 0 ID 237 with timestamp +6 Cleaning up request 1 ID 238 with timestamp +6 Cleaning up request 2 ID 239 with timestamp +6 Cleaning up request 3 ID 240 with timestamp +6 Cleaning up request 4 ID 241 with timestamp +6 Cleaning up request 5 ID 242 with timestamp +7 Cleaning up request 6 ID 243 with timestamp +7 Cleaning up request 7 ID 244 with timestamp +7 Waking up in 3.0 seconds. Cleaning up request 8 ID 245 with timestamp +7 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Free-radius-authentication-with-AD-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 5