- Freeradius-Users - lists.freeradius.org

FreeRADIUS Beginner's Guide
by Ian Pilcher 02 Nov '11

02 Nov '11

I'm a complete newbie to RADIUS, looking to make use of the features of my new "smart" switches and wireless access point to secure my home network, so the title certainly sounds right. Has anyone had a look at this book yet? If so, what are your thoughts? Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com "If you're going to shift my paradigm ... at least buy me dinner first." ========================================================================

6 9

Re: cisco WAP/FreeRadius/OpenLDAP
by Matthew Arguin 02 Nov '11

02 Nov '11

So based on a previous recommendation, i just upgraded my freeradius2 to 2.1.12. here is the latest radtest run: [root@ops2 modules]# radtest marguin2 r0adkill localhost 0 <secret> Sending Access-Request of id 177 to 127.0.0.1 port 1812 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=177, length=30 Filter-Id = "wireless" and here is the debug when i test a laptop connecting: Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 57047, id=177, length=78 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x1ef5c6c6cf3f4ec1042b39d10a933a02 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marguin2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [ldap] performing user authorization for marguin2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> marguin2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=marguin2) [ldap] expand: ou=people,dc=currensee,dc=com -> ou=people,dc=currensee,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap.local.currensee.com:389, authentication 0 [ldap] setting TLS CACert File to /etc/ldap/csca.crt [ldap] bind as cn=manager,dc=currensee,dc=com/VcnxJbFqeAuAFyiu3zvi to ldap.local.currensee.com:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=people,dc=currensee,dc=com, with filter (uid=marguin2) [ldap] checking if remote access for marguin2 is allowed by radiusFilterId [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CRYPT}tGS8HbszeyDmM" [ldap] looking for reply items in directory... [ldap] radiusFilterId -> Filter-Id = "wireless" [ldap] user marguin2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "r0adkill" [pap] Using CRYPT password "tGS8HbszeyDmM" [pap] User authenticated successfully ++[pap] returns ok # Executing section post-auth from file /etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 177 to 127.0.0.1 port 57047 Filter-Id = "wireless" Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 177 with timestamp +8 Ready to process requests. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=130, length=133 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x25e770a8cf7f8577f8a4915a0a234c74 EAP-Message = 0x0202000e01616e6f6e796d6f7573 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for anonymous [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> anonymous [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=anonymous) [ldap] expand: ou=people,dc=currensee,dc=com -> ou=people,dc=currensee,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=people,dc=currensee,dc=com, with filter (uid=anonymous) [ldap] object not found [ldap] search failed [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 130 to 192.168.10.31 port 1645 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078caa5cbc436d046d9dce36c6 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=131, length=229 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x26889f61e8de8e2c6e10b74f96a452f1 EAP-Message = 0x0203005c190016030100510100004d03014eb1639686848537ddd0c96aa8062750416eae950922291bbba0af9cfae968a300002600390038003500160013000a00330032002f00050004001500120009001400110008000600030100 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078caa5cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 92 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0051], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 06cd], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 131 to 192.168.10.31 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x037fa003020102020900d869d83ec24831ce300d06092a864886f70d01010405003081b931183016060355040a130f43757272656e7365652c20496e632e31143012060355040b130b456e67696e656572696e673121301f06092a864886f70d0109011612726f6f744063757272656e7365652e636f6d310f300d06035504071306426f73746f6e311630140603550408130d4d617373616368757365747473310b3009060355040613025553312e302c060355040313254c6f63616c2043757272656e73656520436572746966696361746520417574686f72697479301e170d3130303432363138323634325a170d3230303432353138323634325a EAP-Message = 0x3081b931183016060355040a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078dad5cbc436d046d9dce36c6 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=132, length=143 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x5b640da8918d526233c3ccf055c38e7b EAP-Message = 0x020400061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078dad5cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 132 to 192.168.10.31 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x83acccdaba7cfbd7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078eac5cbc436d046d9dce36c6 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=133, length=143 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0xbcb3f7da663c62412c3d92eb9610b21a EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078eac5cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 133 to 192.168.10.31 port 1645 EAP-Message = 0x010600b61900b77eba9bc0d843a1e70cbc91337bad9c2f401fd7f237bfdd0121dd64bc036829e6972a13ab0080216a3ef15f4e23893134c1e8a68c4b204bc3f0049e345d68abe39e46dad39a5993492fc2e5fc889e16b8336dc0b4500ca85ab762cfc2981d8a72eb7e5a3ba754a257e2cd8404a97485640634fee929d3ca79a902fccc99ea73b7076b222b84b699e72f6302625e7cdad6afd38a17585f4175ceb5196a4c403cca197e6aa19d9b16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078faf5cbc436d046d9dce36c6 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=134, length=341 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0xd9d6c025a9cc8adf9b335e7da36824d1 EAP-Message = 0x020600cc19001603010086100000820080f936761756c50ab1fa1ebd2fbff6e71af919343742eb224468dae4bc4a0314cdf271c6ca9313cdd7efb584731d4c6ceba4a447e6e8a836b615ad353a5c6e41c31c4d2a6a3a2f3afbd373accbec80df6900bcaea06b7e7b9a0fc77e6c92603aa10413fb61d035760f58c7cfdd197ffc8ce8632df0c5096bc0ae23bf0dfa4c8ccf1403010001011603010030f2be8bbb65decb68454b4de12d99dde34bd5d1a039db44a9b14da5c5378388a0954eda1a5d4c386d797ee84c8d5923e7 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078faf5cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 204 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 134 to 192.168.10.31 port 1645 EAP-Message = 0x01070041190014030100010116030100300d1ee2c2c4bc3706cb476ffa3b74949d84502de1b01a5f6da3efef07c438426b4d17e4e07e0d703389d1e9dc08b1b22d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca9450788ae5cbc436d046d9dce36c6 Finished request 5. Going to the next request Waking up in 1.3 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=135, length=143 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x70dc4102a65e57d3bb58ee3ae0b975ac EAP-Message = 0x020700061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca9450788ae5cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 135 to 192.168.10.31 port 1645 EAP-Message = 0x0108002b190017030100204dfc77d11a861969c087157ec956873654e4212570ff9a9c8f74abf27a24bea2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca9450789a15cbc436d046d9dce36c6 Finished request 6. Going to the next request Waking up in 1.3 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=136, length=217 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0xfcfd2de20f4dd17fe27a932940065613 EAP-Message = 0x0208005019001703010020a741a4d57b7df591341632d17eb4fbdd1e8a55f3e22b10c7bcb9c4b75ea3cdba17030100204e5f007345bed18e9454e29df1c9bb1482d137e2f4da1945eaaca40d5cd45aca NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca9450789a15cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - marguin2 [peap] Got inner identity 'marguin2' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0208000d016d61726775696e32 server { [peap] Setting User-Name to marguin2 Sending tunneled request EAP-Message = 0x0208000d016d61726775696e32 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marguin2" server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "marguin2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for marguin2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> marguin2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=marguin2) [ldap] expand: ou=people,dc=currensee,dc=com -> ou=people,dc=currensee,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=people,dc=currensee,dc=com, with filter (uid=marguin2) [ldap] checking if remote access for marguin2 is allowed by radiusFilterId [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CRYPT}tGS8HbszeyDmM" [ldap] looking for reply items in directory... [ldap] radiusFilterId -> Filter-Id = "wireless" [ldap] user marguin2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Filter-Id = "wireless" EAP-Message = 0x010900221a0109001d101541ae87d9536c451df82fbb9eabdc3e6d61726775696e32 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x769c0ec5769514377b463afe53c96b87 [peap] Got tunneled reply RADIUS code 11 Filter-Id = "wireless" EAP-Message = 0x010900221a0109001d101541ae87d9536c451df82fbb9eabdc3e6d61726775696e32 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x769c0ec5769514377b463afe53c96b87 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 136 to 192.168.10.31 port 1645 EAP-Message = 0x0109004b19001703010040ffb90c9da2e7017a24ff61dac25db142af27fa741fdb60fcc0c440acf0dcc75f5e6d7536ce64ee54612024ecb7bb0862e6bacb09b424babdf78c0b9d17d31f19 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078aa05cbc436d046d9dce36c6 Finished request 7. Going to the next request Waking up in 0.3 seconds. Cleaning up request 1 ID 130 with timestamp +60 Cleaning up request 2 ID 131 with timestamp +60 Cleaning up request 3 ID 132 with timestamp +60 Cleaning up request 4 ID 133 with timestamp +60 Waking up in 3.5 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=137, length=217 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x8f599fef2ab96537cbe0039355513370 EAP-Message = 0x020900501900170301002036347ccd731b599adf5ecabb4068fa5940970abfb4951607a87ef622fae453c21703010020a837e04a9155a6e12a5814378ee3efee9986e5069e0714a1cea941ff2f5492cf NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078aa05cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type nak [peap] Got tunneled request EAP-Message = 0x020900060306 server { [peap] Setting User-Name to marguin2 Sending tunneled request EAP-Message = 0x020900060306 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marguin2" State = 0x769c0ec5769514377b463afe53c96b87 server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "marguin2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for marguin2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> marguin2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=marguin2) [ldap] expand: ou=people,dc=currensee,dc=com -> ou=people,dc=currensee,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=people,dc=currensee,dc=com, with filter (uid=marguin2) [ldap] checking if remote access for marguin2 is allowed by radiusFilterId [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CRYPT}tGS8HbszeyDmM" [ldap] looking for reply items in directory... [ldap] radiusFilterId -> Filter-Id = "wireless" [ldap] user marguin2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/gtc [eap] processing type gtc [gtc] expand: Password: -> Password: ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Filter-Id = "wireless" EAP-Message = 0x010a000f0650617373776f72643a20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x769c0ec5779608377b463afe53c96b87 [peap] Got tunneled reply RADIUS code 11 Filter-Id = "wireless" EAP-Message = 0x010a000f0650617373776f72643a20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x769c0ec5779608377b463afe53c96b87 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 137 to 192.168.10.31 port 1645 EAP-Message = 0x010a002b19001703010020bc50433da891fded937957b95bc1d6d39b57d7ebe06d6e578c2cce0a84ecfe8c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca945078ba35cbc436d046d9dce36c6 Finished request 8. Going to the next request Waking up in 2.3 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=138, length=217 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0xe64adb38adc28db3b0e34547c38dd977 EAP-Message = 0x020a0050190017030100207294fdf97f3535985e24cd9a3c263476e4b9b0619349cbbb3d825e650cbf14701703010020e1bd830a1c52f8807d7e1b7c7b012163d5b581622eb0fbf5652ec7a450e76c5c NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca945078ba35cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type gtc [peap] Got tunneled request EAP-Message = 0x020a000d06723061646b696c6c server { [peap] Setting User-Name to marguin2 Sending tunneled request EAP-Message = 0x020a000d06723061646b696c6c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marguin2" State = 0x769c0ec5779608377b463afe53c96b87 server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns updated [suffix] No '@' in User-Name = "marguin2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 10 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for marguin2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> marguin2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=marguin2) [ldap] expand: ou=people,dc=currensee,dc=com -> ou=people,dc=currensee,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=people,dc=currensee,dc=com, with filter (uid=marguin2) [ldap] checking if remote access for marguin2 is allowed by radiusFilterId [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{CRYPT}tGS8HbszeyDmM" [ldap] looking for reply items in directory... [ldap] radiusFilterId -> Filter-Id = "wireless" [ldap] user marguin2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/gtc [eap] processing type gtc [gtc] # Executing group from file /etc/raddb/sites-enabled/inner-tunnel [gtc] +- entering group PAP {...} [pap] login attempt with password "r0adkill" [pap] Using CRYPT password "*" [pap] Passwords don't match ++[pap] returns reject [eap] Handler failed in EAP/gtc [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Filter-Id = "wireless" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Filter-Id = "wireless" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 138 to 192.168.10.31 port 1645 EAP-Message = 0x010b002b19001703010020bc8ab82b419f499978e7d5faedce851471945ab65159cc3b5762de33d8eeb94b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ca9450784a25cbc436d046d9dce36c6 Finished request 9. Going to the next request Waking up in 0.8 seconds. Cleaning up request 5 ID 134 with timestamp +64 Cleaning up request 6 ID 135 with timestamp +64 Waking up in 1.0 seconds. rad_recv: Access-Request packet from host 192.168.10.31 port 1645, id=139, length=217 User-Name = "anonymous" Framed-MTU = 1400 Called-Station-Id = "64a0.e729.b890" Calling-Station-Id = "1c65.9d32.fb68" Service-Type = Login-User Message-Authenticator = 0x6eef9b0bc3f36009729481a23b6e8326 EAP-Message = 0x020b005019001703010020292b726e855a04ed0d00ef8437129fc3bff157c8cf703900a952f77e9575aeab1703010020bbddafa3746eafb2871786e57813ad848b14ff4f24df4312b8bfa8325ce5ab25 NAS-Port-Type = Wireless-802.11 NAS-Port = 1911 NAS-Port-Id = "1911" State = 0x8ca9450784a25cbc436d046d9dce36c6 NAS-IP-Address = 192.168.10.31 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 11 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> anonymous attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 10 for 1 seconds Going to the next request Waking up in 0.4 seconds. Cleaning up request 7 ID 136 with timestamp +64 Waking up in 0.5 seconds. Sending delayed reject for request 10 Sending Access-Reject of id 139 to 192.168.10.31 port 1645 EAP-Message = 0x040b0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.1 seconds. Cleaning up request 8 ID 137 with timestamp +66 Waking up in 1.5 seconds. Cleaning up request 9 ID 138 with timestamp +68 Waking up in 2.3 seconds. Cleaning up request 10 ID 139 with timestamp +69 Ready to process requests. On 11/1/2011 2:09 AM, freeradius-users-request(a)lists.freeradius.org wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: IPv6 ready? (Alan Buxey) > 2. Re: cisco WAP/FreeRadius/OpenLDAP (Alan Buxey) > 3. Re: add field in radcheck table (gary) > 4. Re: add field in radcheck table (Fajar A. Nugraha) > 5. Client hostname in clients.conf instead of IP address (tohaikmeng) > 6. Re: Client hostname in clients.conf instead of IP address > (Fajar A. Nugraha) > 7. Re: add field in radcheck table (gary) > 8. Re: add field in radcheck table (Fajar A. Nugraha) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 31 Oct 2011 19:23:09 +0000 > From: Alan Buxey<A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: IPv6 ready? > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID:<20111031192309.GC19191(a)lboro.ac.uk> > Content-Type: text/plain; charset=iso-8859-1 > > Hi, >> Thank you all for your help. I added two more listen blocks in >> radiusd.conf and I updated detail { ... with the following: >> %{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}} and it works but >> ..... (there's always a but). if we use an IPv6 address, then >> Packet-Src-APv6-Address value will be, for instance, 0:0:0:0:0:0:0:0, and >> the path becomes : >> >> ?????????????? ${radacctdir}/0:0:0:0:0:0:0:0/detail-%Y%m%d.log >> >> but FR crashes since it cannot create a folder with that name. Is there >> any way of overcoming this issue? replace : with . or so??? > well, you asked how it could be done..you didnt say you were > trying this on Windows! whats the next surprise? > > I would do something like use PERL to make %{Packet-Src-IPv6-Address} become > sanitized..... eg assign %{Tmp-String-0} and use SED to swap : with - > > this means no single source code line change and easily adaptable to whatever > else you might come across.... > > then use simly use %{Tmp-String-0} in your detail module config.... > > > alan > > > ------------------------------ > > Message: 2 > Date: Mon, 31 Oct 2011 19:25:49 +0000 > From: Alan Buxey<A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: cisco WAP/FreeRadius/OpenLDAP > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID:<20111031192549.GD19191(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > >> so now the password is not clear text in the log as it was before but >> still seeing that no good password error....but then there is that line >> towards the bottom that sasys user authorized to use remote access... do >> i need to configure Filter-Id or something in the sites-enabled/default >> or innertunnel or something like that? > getting confused with authorization and authentication? check your requirements > in LDAP - do they match (eg CN/DN?) > > have you got PAP listed after the ldap and is the auto_header enabled in the pap > module? > > alan > > > ------------------------------ > > Message: 3 > Date: Tue, 1 Nov 2011 10:07:00 +0800 > From: "gary"<gary.yang(a)browan.com> > Subject: Re: add field in radcheck table > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID:<003901cc983a$f335b490$cd15a8c0@ggyy40fbc8fbae> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > ----- Original Message ----- > From: "Fajar A. Nugraha"<list(a)fajar.net> > To: "FreeRadius users mailing list"<freeradius-users(a)lists.freeradius.org> > Sent: Monday, October 31, 2011 8:34 PM > Subject: Re: add field in radcheck table > > >> On Mon, Oct 31, 2011 at 5:23 PM, gary<gary.yang(a)browan.com> wrote: >>> Hi Fajar >>> I think the secondname field may be realm instead of. >> First rule before asking anything: make SURE you know what you want. >> When you're not even sure, how can others help you? >> >>> I am thinking this in case without proxy, using local database it can >>> determine by two field "username+realm" instead one check field username >>> such as "gary@companyA" . User can see his/her name like "gary" only >>> without >>> "@companyA" character. >> What do you mean "User can SEE"? >> >> The question is simple. What does the user put as username? How do you >> want to process that username? >> >> If the user only inputs "gary", and you don't know how you you can get >> the realm, then how can FR do what you want? By being psychic? >> > Sorry for my poor english. > > From the login page,user can type his name and select pull-down option for > the realm and then send to FR server for authentication. > for example, gary@domain1 and gary@domain2 come from different company and > both in same database. > I can directly input gary@domain1 and gary@domain2 as user name for > authentication. > but I would like to separate two field for checking. > user can see(probably read) user infomation(eg:logout page) only user name > instead of gary@domain1 . > Furthermore, in case lot of data in radcheck, it can be search,sort...etc > according to the realm field to improve server performance. > >> -- >> Fajar >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > > ------------------------------ > > Message: 4 > Date: Tue, 1 Nov 2011 10:02:22 +0700 > From: "Fajar A. Nugraha"<list(a)fajar.net> > Subject: Re: add field in radcheck table > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <CAG1y0scMgFLgQivxcF+i12pUyFcMWWzZuXYgn8VdfMmz4QRBqw(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Tue, Nov 1, 2011 at 9:07 AM, gary<gary.yang(a)browan.com> wrote: >>> From the login page,user can type his name and select pull-down option for >> the realm and then send to FR server for authentication. >> for example, gary@domain1 and gary@domain2 come from different company and >> both in same database. >> I can directly input gary@domain1 and gary@domain2 as user name for >> authentication. >> but I would like to separate two field for checking. >> user can see(probably read) user infomation(eg:logout page) only user name >> instead of gary@domain1 . > This is a captive portal setup, right? FR doesn't really care what > user puts in "drop down box", it only cares what the NAS (e.g. > chillispot) sends. And the NAS doesn't really care what the user > inputs, it only cares what the captive portal sends it (which may or > may not be the same as what the user inputs). > > For example, in my setup the captive portal adds a realm automatically > (user can't put it manually) and pre-process the password that user > entered (e.g. using a custom hash). > > In that setup there's really no need to separate user and realm. Just > use the default setup. > >> Furthermore, in case lot of data in radcheck, it can be search,sort...etc >> according to the realm field to improve server performance. > I actually think the easiest way is to just add a "realm" field in > radcheck as ENUM type, indexed, used only for search/sorting purposes, > updated automatically by mysql trigger. That way you don't have to > modify anything on FR side. > -- Matthew Arguin Currensee, Inc. 54 Canal St, 4th Floor Boston, MA 02114 (617) 986-4758 (Office) _________________________________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824

4 3

Re: cisco WAP/FreeRadius/OpenLDAP
by Matthew Arguin 02 Nov '11

02 Nov '11

something else i just found radtest only seems to work from localhost.. [root@ops2 raddb]# radtest marguin2 r0adkill localhost 0 i6Lw7uNsG7pZDUGgxirg Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=235, length=30 Filter-Id = "wireless" [root@ops2 raddb]# radtest marguin2 r0adkill 192.168.10.31 0 i6Lw7uNsG7pZDUGgxirg Sending Access-Request of id 96 to 192.168.10.31 port 1812 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Request of id 96 to 192.168.10.31 port 1812 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Request of id 96 to 192.168.10.31 port 1812 User-Name = "marguin2" User-Password = "r0adkill" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 radclient: no response from server for ID 96 socket 3 On 11/2/2011 10:53 AM, freeradius-users-request(a)lists.freeradius.org wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Huntgroup Checking (simonm123) > 2. Re: Need help with Freeradius and 802.1X (johnboy68) > 3. Re: Huntgroup Checking (Ben West) > 4. Re: cisco WAP/FreeRadius/OpenLDAP (Matthew Arguin) > 5. Re: Need help with Freeradius and 802.1X (Alan Buxey) > 6. Re: Need help with Freeradius and 802.1X (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 2 Nov 2011 07:07:34 -0700 (PDT) > From: simonm123<simon.morley(a)me.com> > Subject: Re: Huntgroup Checking > To: freeradius-users(a)lists.freeradius.org > Message-ID:<1320242854156-4958155.post(a)n5.nabble.com> > Content-Type: text/plain; charset=us-ascii > > Can anyone tell me if hungroup checking can be made to work on the group > level, not just the user level? > > Thanks > > -- > View this message in context: http://freeradius.1045715.n5.nabble.com/Huntgroup-Checking-tp4950385p495815… > Sent from the FreeRadius - User mailing list archive at Nabble.com. > > > ------------------------------ > > Message: 2 > Date: Wed, 2 Nov 2011 07:08:58 -0700 (PDT) > From: johnboy68<tripleadad68(a)yahoo.com> > Subject: Re: Need help with Freeradius and 802.1X > To: freeradius-users(a)lists.freeradius.org > Message-ID:<1320242938352-4958157.post(a)n5.nabble.com> > Content-Type: text/plain; charset=us-ascii > > I have ntlm_auth working. I can auth my AD users with this command: > > radtest -t mschap aduser aspassword localhost 0 testing123 > > And it works. > > My problem is when I configure one of my Cisco switches to do 802.1x and > authenticate with Freeradius my Windows (Windows 7 and Vista) machines fail > to get authorized with the Windows supplicant. I am running Freeradius in > debug mode and have tried to trace down where it is failing on my own but > since I have no experience in this area I am just chasing my tail. Is it a > problem with PEAP, EAP, TLS? Do I need a certificate? I just don't know > and if I did I wouldn't know how to configure it. I have not been able to > find any conclusive documentation in this area. > > I could put the output here of what Freeradius outputs during a connection > attempt but I since I am testing this in our production environment, I don't > want to put that kind of information out in a public forum. > > Any thoughts? > > > > -- > View this message in context: http://freeradius.1045715.n5.nabble.com/Need-help-with-Freeradius-and-802-1… > Sent from the FreeRadius - User mailing list archive at Nabble.com. > > > ------------------------------ > > Message: 3 > Date: Wed, 2 Nov 2011 09:22:25 -0500 > From: Ben West<westbywest(a)gmail.com> > Subject: Re: Huntgroup Checking > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <CADSh-SNFZJ1dOx3S1D_sVKPHxxP7GfDq-4+=2rSRLtUwbS+nTw(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > You may need to inspect whether the groupcheck query in > mysql/dailup.conf (if you are using MySQL) looks in the huntgroup > table. > > For example, this is the default query in my copy of freeRADIUS > provided by Debian: > > authorize_group_check_query = "SELECT id, groupname, attribute, \ > Value, op \ > FROM ${groupcheck_table} \ > WHERE groupname = '%{Sql-Group}' \ > ORDER BY id" > > Try modifying it as such: > > authorize_group_check_query = "SELECT id, groupname, attribute, \ > value, op \ > FROM ${groupcheck_table} \ > WHERE ( groupname = '%{Sql-Group}' \ > OR groupname = '%{Huntgroup-Name}' ) \ > ORDER BY id" > > > On Wed, Nov 2, 2011 at 9:07 AM, simonm123<simon.morley(a)me.com> wrote: >> Can anyone tell me if hungroup checking can be made to work on the group >> level, not just the user level? >> >> Thanks >> >> -- >> View this message in context: http://freeradius.1045715.n5.nabble.com/Huntgroup-Checking-tp4950385p495815… >> Sent from the FreeRadius - User mailing list archive at Nabble.com. >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >> > > -- Matthew Arguin Currensee, Inc. 54 Canal St, 4th Floor Boston, MA 02114 (617) 986-4758 (Office) _________________________________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824

2 1

ssh authentication only via Radius
by gthbvf＠aol.com 02 Nov '11

02 Nov '11

Greetings everyone, We have few of linux servers which we are trying to get authenticated only via radius. I found out I'm able to authenticate using radius password or using local (system) password. I am trying to configure it in such a way that as long as radius server is up and responding user should only able to logon via ssh with his radius password (no login with local password or even other local user and password ) And in case of radius is unavailable/not responding, user should able to logon locally with local pass My question to all experts is 1) can it be done 2) what changes and where needs to be done (/etc/pam.d/sshd or system-auth-ac) Thanks Shri

1 0

Need help with Freeradius and 802.1X
by johnboy68 02 Nov '11

02 Nov '11

I have searched the forum but can't find what I'm looking for. Here is my scenario: Users with Vista machines and the 802.1X supplicant configured Windows Server 2008 with Active Directory Other network connected devices and 'unknown' computers 100% Cisco LAN/WAN Here is what I want to do: Dynamic VLAN assignment based on 802.1X with Freeradius able to use Active Directory for the computers with the supplicant configured and also be able to use MySQL to do MAC authentication bypass for known devices like printers that can't use a supplicant. I don't have much experience with Freeradius but I feel this is something that would be a "normal" 802.1X configuration. Any help on how to configure this environment would be greatly appreciated. Thanks, John -- View this message in context: http://freeradius.1045715.n5.nabble.com/Need-help-with-Freeradius-and-802-1… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 4

Re: cisco WAP/FreeRadius/OpenLDAP
by Matthew Arguin 02 Nov '11

02 Nov '11

Alan, i have no mention of ldap in my pap module file, but the auto_header *WAS* set to no, fixed that same result: [root@ops2 raddb]# cat modules/pap # -*- text -*- # # $Id$ # PAP module to authenticate users based on their stored password # # Supports multiple encryption/hash schemes. See "man rlm_pap" # for details. # # The "auto_header" configuration item can be set to "yes". # In this case, the module will look inside of the User-Password # attribute for the headers {crypt}, {clear}, etc., and will # automatically create the attribute on the right-hand side, # with the correct value. It will also automatically handle # Base-64 encoded data, hex strings, and binary data. pap { auto_header = yes } -m On 11/1/2011 2:09 AM, freeradius-users-request(a)lists.freeradius.org wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: IPv6 ready? (Alan Buxey) > 2. Re: cisco WAP/FreeRadius/OpenLDAP (Alan Buxey) > 3. Re: add field in radcheck table (gary) > 4. Re: add field in radcheck table (Fajar A. Nugraha) > 5. Client hostname in clients.conf instead of IP address (tohaikmeng) > 6. Re: Client hostname in clients.conf instead of IP address > (Fajar A. Nugraha) > 7. Re: add field in radcheck table (gary) > 8. Re: add field in radcheck table (Fajar A. Nugraha) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 31 Oct 2011 19:23:09 +0000 > From: Alan Buxey<A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: IPv6 ready? > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID:<20111031192309.GC19191(a)lboro.ac.uk> > Content-Type: text/plain; charset=iso-8859-1 > > Hi, >> Thank you all for your help. I added two more listen blocks in >> radiusd.conf and I updated detail { ... with the following: >> %{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}} and it works but >> ..... (there's always a but). if we use an IPv6 address, then >> Packet-Src-APv6-Address value will be, for instance, 0:0:0:0:0:0:0:0, and >> the path becomes : >> >> ?????????????? ${radacctdir}/0:0:0:0:0:0:0:0/detail-%Y%m%d.log >> >> but FR crashes since it cannot create a folder with that name. Is there >> any way of overcoming this issue? replace : with . or so??? > well, you asked how it could be done..you didnt say you were > trying this on Windows! whats the next surprise? > > I would do something like use PERL to make %{Packet-Src-IPv6-Address} become > sanitized..... eg assign %{Tmp-String-0} and use SED to swap : with - > > this means no single source code line change and easily adaptable to whatever > else you might come across.... > > then use simly use %{Tmp-String-0} in your detail module config.... > > > alan > > > ------------------------------ > > Message: 2 > Date: Mon, 31 Oct 2011 19:25:49 +0000 > From: Alan Buxey<A.L.M.Buxey(a)lboro.ac.uk> > Subject: Re: cisco WAP/FreeRadius/OpenLDAP > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID:<20111031192549.GD19191(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > >> so now the password is not clear text in the log as it was before but >> still seeing that no good password error....but then there is that line >> towards the bottom that sasys user authorized to use remote access... do >> i need to configure Filter-Id or something in the sites-enabled/default >> or innertunnel or something like that? > getting confused with authorization and authentication? check your requirements > in LDAP - do they match (eg CN/DN?) > > have you got PAP listed after the ldap and is the auto_header enabled in the pap > module? > > alan > > > ------------------------------ > > Message: 3 > Date: Tue, 1 Nov 2011 10:07:00 +0800 > From: "gary"<gary.yang(a)browan.com> > Subject: Re: add field in radcheck table > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID:<003901cc983a$f335b490$cd15a8c0@ggyy40fbc8fbae> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > ----- Original Message ----- > From: "Fajar A. Nugraha"<list(a)fajar.net> > To: "FreeRadius users mailing list"<freeradius-users(a)lists.freeradius.org> > Sent: Monday, October 31, 2011 8:34 PM > Subject: Re: add field in radcheck table > > >> On Mon, Oct 31, 2011 at 5:23 PM, gary<gary.yang(a)browan.com> wrote: >>> Hi Fajar >>> I think the secondname field may be realm instead of. >> First rule before asking anything: make SURE you know what you want. >> When you're not even sure, how can others help you? >> >>> I am thinking this in case without proxy, using local database it can >>> determine by two field "username+realm" instead one check field username >>> such as "gary@companyA" . User can see his/her name like "gary" only >>> without >>> "@companyA" character. >> What do you mean "User can SEE"? >> >> The question is simple. What does the user put as username? How do you >> want to process that username? >> >> If the user only inputs "gary", and you don't know how you you can get >> the realm, then how can FR do what you want? By being psychic? >> > Sorry for my poor english. > > From the login page,user can type his name and select pull-down option for > the realm and then send to FR server for authentication. > for example, gary@domain1 and gary@domain2 come from different company and > both in same database. > I can directly input gary@domain1 and gary@domain2 as user name for > authentication. > but I would like to separate two field for checking. > user can see(probably read) user infomation(eg:logout page) only user name > instead of gary@domain1 . > Furthermore, in case lot of data in radcheck, it can be search,sort...etc > according to the realm field to improve server performance. > >> -- >> Fajar >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > > ------------------------------ > > Message: 4 > Date: Tue, 1 Nov 2011 10:02:22 +0700 > From: "Fajar A. Nugraha"<list(a)fajar.net> > Subject: Re: add field in radcheck table > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <CAG1y0scMgFLgQivxcF+i12pUyFcMWWzZuXYgn8VdfMmz4QRBqw(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Tue, Nov 1, 2011 at 9:07 AM, gary<gary.yang(a)browan.com> wrote: >>> From the login page,user can type his name and select pull-down option for >> the realm and then send to FR server for authentication. >> for example, gary@domain1 and gary@domain2 come from different company and >> both in same database. >> I can directly input gary@domain1 and gary@domain2 as user name for >> authentication. >> but I would like to separate two field for checking. >> user can see(probably read) user infomation(eg:logout page) only user name >> instead of gary@domain1 . > This is a captive portal setup, right? FR doesn't really care what > user puts in "drop down box", it only cares what the NAS (e.g. > chillispot) sends. And the NAS doesn't really care what the user > inputs, it only cares what the captive portal sends it (which may or > may not be the same as what the user inputs). > > For example, in my setup the captive portal adds a realm automatically > (user can't put it manually) and pre-process the password that user > entered (e.g. using a custom hash). > > In that setup there's really no need to separate user and realm. Just > use the default setup. > >> Furthermore, in case lot of data in radcheck, it can be search,sort...etc >> according to the realm field to improve server performance. > I actually think the easiest way is to just add a "realm" field in > radcheck as ENUM type, indexed, used only for search/sorting purposes, > updated automatically by mysql trigger. That way you don't have to > modify anything on FR side. > -- Matthew Arguin Currensee, Inc. 54 Canal St, 4th Floor Boston, MA 02114 (617) 986-4758 (Office) _________________________________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824

1 0

Service-Type Error
by Darren Shaw 01 Nov '11

01 Nov '11

Hello, The FreeRadius server is a VM machine and the ESX host failed, everything came back and is now working apart from the following The Radius Service, when the service starts this is the error we receive /usr/local/etc/raddb/sites-enabled/default[219]: ERROR: Unknown value Administrative-User, for attribute Service-Type /usr/local/etc/raddb/sites-enabled/default[214]: Failed to parse "update" subsection. /usr/local/etc/raddb/sites-enabled/default[210]: Failed to parse "if" subsection. /usr/local/etc/raddb/sites-enabled/default[62]: Errors parsing authorize section. This error prevents the Network team from logging into their devices, their username is authenticated but they receive the following on the SSH session to the switch/router. ACCEPT: Authorizing enable access and then nothing. I have checked the following Dictionary.rfc2865 and this states that the administrative-user has a value of 6, which according to Cisco is correct. We use the Radius Server for all our Wireless Authentication and this is working without any known issues, please find the section of the Radius configuration file from '/usr/local/etc/raddb/sites-available/default'. By commenting out the 'Service-Type' line Raduis will start, otherwise we get a syntax error. if(!control:Auth-Type && (request:NAS-Port-Type == Virtual || request:NAS-Port-Type == Async) && (NAS-Identifier == hudds_switches || NAS-Identifier == bar_switches || NAS-Identifier == old_switches || "%{client:clientgroup}" == "networks")){ update control { Proxy-To-Realm := LOCAL } if(ldap_staff-Ldap-Group == CMSX_NETW){ update control { Auth-Type = "ntlm_auth" } update reply { Reply-Message = "ACCEPT: Authorizing enable access", Cisco-AVPair = "shell:roles*\"network-admin\"", Cisco-AVPair += "shell:priv-lvl+15", #******* Service-Type = Administrative-User, *****# Fall-Through = No } } } Help is greatly appreciated. Rgds Darren Shaw The Network Team Computing Services University of Huddersfield Queensgate Huddersfield HD1 3DH TEL: 01484 471317 MOBILE: 07792 773807 ________________________________ --- This transmission is confidential and may be legally privileged. If you receive it in error, please notify us immediately by e-mail and remove it from your system. If the content of this e-mail does not relate to the business of the University of Huddersfield, then we do not endorse it and will accept no liability.

2 1

Proxy decision based on LDAP lookups and Radius_client match.
by Frank Skovboel 01 Nov '11

01 Nov '11

Hi, I have been asked to build a radius proxy using freeradius, and I'm completely new to freeradius, and with the flexibility in freeradius I'm having a hard time figuring out how to accomplish my goal, or if it's even possible to do. Objective: I need to verify that the user that tries to login from Company A really is an employee of Company A, and not an employee of Company B. For this purpose I have access each company's AD and of cause I know what radius clients belong to each company. Once I have validated that the user exists in the Company's AD, I then have to proxy it to another radius server where the users OTP will be validated, and from that give an access-accept or access-reject. If the user does not exist in the Company's AD, freeradius should send an access-reject and not proxy it to the OTP radius. I imagine the flow is some thing like: 1) User from Company A tries to login 2) Company A's VPN sends a radius request to Freeradius 3) Freeradius looks at the Radius_client IP and finds the right AD. 4) Freeradius does an LDAP bind to Company A's AD, and checks if the user exists. 5) If user exists request is proxied to the OTP radius, if the user does not exists access-reject is sent from Freeradius. I have freeradius setup to proxy the request to the OTP radius server today, without any checks. As I said I'm completely new to Freeradius, and not sure what files I need to configure or what to put in them, so any help is highly appreciated. -- Thank you, Frank Skovboel

2 5

add field in radcheck table
by gary 01 Nov '11

01 Nov '11

2 8

Client hostname in clients.conf instead of IP address
by tohaikmeng 01 Nov '11

01 Nov '11

Hello, Can anyone help me with this question? I have added the following configuration to raddb/modules/attr_rewrite, which allows me to get Client IP address. attr_rewrite addclientip { attribute = Client-IP-Address searchin = packet searchfor = "^$" replacewith = "%{Client-IP-Address}" maxmatches = 1 new_attribute = yes } Is there anyway for me to retrieve the Client hostname as configured in raddb/clients.conf shown in the example below. client www.abc.com { secret = password } Any help will be greatly appreciated. Thanks :) Alex -- View this message in context: http://freeradius.1045715.n5.nabble.com/Client-hostname-in-clients-conf-ins… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1