- Freeradius-Users - lists.freeradius.org

NAS-IP-Address or NAS-Identifier in Access-Request?
by Eric Geier 16 Aug '11

16 Aug '11

Does anyone happen to know if consumer-level Wi-Fi routers typically transmit the NAS-IP-Address or NAS-Identifier (or maybe both) in the Access-Request? Would be great if there was a central place to look up the exact attributes and formats vendors use. Thanks, Eric

2 1

Cant Start Radius Server MAC OSX (snow leopard)
by DavidS 16 Aug '11

16 Aug '11

Hi I tried to Run Radius Server on Mac OSX Server Snow Leopard. Tried to START Radius It wont start I had made a few changed (detailed below) I went to DEBUG with following out put: server10:~ admin$ radiusd -X FreeRADIUS Version 2.1.3, for host i386-apple-darwin10.0, built on Apr 11 2011 at 17:19:07 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /private/etc/raddb/radiusd.conf Unable to open file "/private/etc/raddb/radiusd.conf": Permission denied Errors reading /private/etc/raddb/radiusd.conf server10:~ admin$ I had not edited this file Can anyone help ? Thanks CHANGES I MADE PRIOR TO GETTING THIS ERROR First time I used the Radius Server Using Server Admin selected the Radius service - it appeared as expected identified and I entered a local time capsule (That appeared as a base station) The Radius Server was running I stopped the Radius Server AND using textwrangler edited /etc/raddb/clients.conf I entered the following text below the preceding "#" and above the text "client localhost {" client { ipaddr = 192.168.0.100 netmask = 32 secret = XXXX require_message_authenticator = no shortname = slr877 nastype = cisco } I saved the file closed the file Using textwrangler I edited /etc/raddb/users At the end of the file entered user1 Cleartext-Password := “password” Service-Type = NAS-Prompt-User, cisco-avpair = “webvpn:user-vpn-group=SLRgroup1” Saved the file closed the file Tried to restart the Radius Server and got the above error Please help Thanks -- View this message in context: http://freeradius.1045715.n5.nabble.com/Cant-Start-Radius-Server-MAC-OSX-sn… Sent from the FreeRadius - User mailing list archive at Nabble.com.

8 13

Using a single row in radreply
by denizaydin 16 Aug '11

16 Aug '11

Hi, I am new to FreeRadius and trying to migrate from radiator to FreeRadius for our broadband solution. We are using SQL for subscriber aaa. As It'is stated in the documentation radreply is expecting the return data in form of multiple rows per users which each one includes one attribute, value and Operator if any reply attributes is defined for that users. The problem is our database is composed of one row per subscriber which includes multiple reply attributes. Like ; Username iproute inacl outacl test X Y Z But accourding to documentation it should be Like; Username Attribute Value Op test iproute X := test inacl Y := test outacl Z := how can I change the behavior of the radreply , or is there any other solution to this. ----- Deniz AYDIN Senior Network Engineer -- View this message in context: http://freeradius.1045715.n5.nabble.com/Using-a-single-row-in-radreply-tp47… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

How to setup freeradius for cisco url-redirect?
by 放屁大王 16 Aug '11

16 Aug '11

hi all, how to setup url-redirect with cisco 3550? I tried it with: EAP-MD5,cisco 3550,freeradius 2.1.11, but failed; my users: testuser Cleartext-Password := "testuser" cisco-avpair = "url-redirect=http://10.32.9.41", cisco-avpair += "url-redirect-acl=redirect_acl" thanks

1 0

Freeradius2 Accounting secret
by Adrian Hall 15 Aug '11

15 Aug '11

Hello, I have configured Freeradius2 with MySQL and also setup DaloRadius. I am using it to authenticate PPPoE requests from a Pfsense firewall box. I have set the shared secret for the Authentication side of things, however I keep getting the following error: Received Accounting-Request packet from client with invalid signature! (Shared secret is incorrect.) Dropping packet without response. Where do I set the shared secret in freeradius2 config for the accounting side? thanks, Regards, Adrian Hall.

2 1

Dynamic Clients and ldap threads?
by Peter Lambrechtsen 15 Aug '11

15 Aug '11

Running Free Radius 2.1.7 against a Novell eDirectory LDAP Database. We're using Dynamic Clients for approx 1200 NAS element devices and looking up the Elements in our LDAP database. Even though we have ldap_connections_number = 50 in the modules/ldap we have issues with the dynamic clients. We can increase the number higher but it doesn't seem to make any difference. Each element sends a heartbeat packet to FR once a second to make sure it's still alive which we capture very early on in the authorize second and send a reject. When we restart FreeRadius and since the LDAP server takes about 30 ms to reply to the dynamic client lookup any other heartbeat requests get rejected as unknown clients. Is the newer versions of FreeRadius use the multiple connections of ldap in a more efficient way so that the client lookups work more effectively. Our dynamic clients config is: server dynamic_client_server { authorize { if ("%{ldap:ldap:///ou=Elements,o=Identities?ou?sub?cn=%{Packet-Src-IP-Address}}") { update control { FreeRADIUS-Client-IP-Address = "%{Packet-Src-IP-Address}" FreeRADIUS-Client-Shortname = "%{ldap:ldap:///ou=Elements,o=Identities?l?sub?cn=%{Packet-Src-IP-Address}}" FreeRADIUS-Client-NAS-Type = "other" FreeRADIUS-Client-Secret = "%{ldap:ldap:///ou=Elements,,o=Identities?ou?sub?cn=%{Packet-Src-IP-Address}}" } } ok } } Is the dynamic clients ldap lookups only single threaded, or have I done something incorrect with the configuration?

2 3

freeradius 2.1.7 PEAP mschapv2 invalid parameter
by Eugene Vihman 15 Aug '11

15 Aug '11

Hi. I'm trying to set up PEAP authentication with AD on freeradius 2.1.7 (centos). Everything in users file is commented out (including DEFAULTs) except the test user "bob" who authenticates successfully. Auth requests fail in mschap module with "external program" complaining about an invalid parameter (which I cannot pinpoint). radiusd -X: FreeRADIUS Version 2.1.7, for host i686-redhat-linux-gnu, built on Mar 31 2010 at 00:25:31 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } realm CITYHALL { } realm LOCAL { } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.39.0.0/24 { require_message_authenticator = no secret = "cityhall11" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --domain=%{mschap:NT-Domain} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/radiuskey.pem" certificate_file = "/etc/raddb/certs/radius.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "server2003" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "peap" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating ntdomain realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking pre-proxy {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking pre-proxy {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=234, length=245 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" EAP-Message = 0x02010028014349545948414c4c5cd090d0b4d0bcd0b8d0bdd0b8d181d182d180d0b0d182d0bed180 Message-Authenticator = 0x490abe1078ee3c188763003c6e43e205 +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 1 length 40 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "CITYHALL\Р?РґРјРёРЅРёС?С?С?Р°С?РѕС?", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] Looking up realm "CITYHALL" for User-Name = "CITYHALL\Р?РґРјРёРЅРёС?С?С?Р°С?РѕС?" [ntdomain] Found realm "CITYHALL" [ntdomain] Adding Stripped-User-Name = "Р?РґРјРёРЅРёС?С?С?Р°С?РѕС?" [ntdomain] Adding Realm = "CITYHALL" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 234 to 10.39.0.31 port 8021 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb08d3586c6b10255917bdeca99 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=235, length=310 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb08d3586c6b10255917bdeca99 EAP-Message = 0x0202005719800000004d16030100480100004403014e44cca9cfd29aea47fb1b5aac0d1e4525a05de3cf196712e5fcd92c5f9f15c500001600040005000a0009006400620003000600130012006301000005ff01000100 Message-Authenticator = 0x38c1ccd58c27c231538169fa80f1cdee +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 2 length 87 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 77 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0048], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0795], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 235 to 10.39.0.31 port 8021 EAP-Message = 0x0103040019c0000007d916030100310200002d03014e44ce2e9ba714cd6ce2c2b6f65ff2b111d047de00f9fc1ba16448194c9295b0000004000005ff0100010016030107950b00079100078e0002ea308202e6308201cea003020102020101300d06092a864886f70d0101050500304a31133011060a0992268993f22c6401191603676f7631183016060a0992268993f22c64011916086369747968616c6c31193017060355040313104369747968616c6c20726f6f74204341301e170d3131303532373039303335365a170d3132303532363039303335365a30818d310b3009060355040613025255311430120603550408130b4b616c696e696e67 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x92268993f22c640119160863 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb08c3486c6b10255917bdeca99 Finished request 1. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=236, length=229 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb08c3486c6b10255917bdeca99 EAP-Message = 0x020300061900 Message-Authenticator = 0x9883ed0aaa11a28c464901ada6337fdb +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 236 to 10.39.0.31 port 8021 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x9830c126145da35ba20446567798f7448a1c2e246f96b92945059fd26a169768a3018e5862ce5f532680c81c19bf3ef62f054bb59140162dc340ac5bfc9e5ec8dd753f4fb85d63515d3318b5dcde064322d5ef1d188405905fcb036c3e0e1d0781fa3b359b0dbc033d788147b15e8cd8cb2112fdb01fe4fa13fe5e1adeae0fb16bd07d1757d562cd313c6c7ffbaa6b27e05e443e191ad9ee9ca78dbcfc1d64c5c5b254abbf680eb0afd3ac15d110277e9bc268324b9602a3a90ddf24d032daa1fd4a29838bfbf748533ae570380ff88bd7aa0e82dc3b5317208d880ec71d3b1d5080e624ac882c737616030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb08f3386c6b10255917bdeca99 Finished request 2. Going to the next request Waking up in 4.2 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=237, length=415 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb08f3386c6b10255917bdeca99 EAP-Message = 0x020400c01980000000b61603010086100000820080236bdcc292f96b0adae8ef253c3cb67e3f890dfb46400795d06b8dfbeb45c6e0dc5b17ea6fec5e0d05d30b85beeba725430d3afc5b51eb415097ceeb3f2a6fde3338447dd7e798dc5cb6fbb1decb68aa8aa3d12eaf7737c16db714e482e1041769e3a101bd6493095f54b534b42c23a3f71f9ed5dfc7f0b1bf014154c2f38fd814030100010116030100206bf24afa2fcbee2b43b902dc86cc3ac4a01c7e898133f4acd87c2eba5aa4b9f8 Message-Authenticator = 0xb247a94690e297dde906468db367fbb8 +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 4 length 192 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 182 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 237 to 10.39.0.31 port 8021 EAP-Message = 0x01050031190014030100010116030100209a715dd6ad5982ce3989d9ae57c213029d6e204b1ed737b033ed07a84aaff445 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb08e3286c6b10255917bdeca99 Finished request 3. Going to the next request Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=238, length=229 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb08e3286c6b10255917bdeca99 EAP-Message = 0x020500061900 Message-Authenticator = 0x517d7879c30312c2bfb56144c18ab9c4 +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 238 to 10.39.0.31 port 8021 EAP-Message = 0x01060020190017030100157002069875e353f5077b12fa9c7f4e4f6b94a82296 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb0893186c6b10255917bdeca99 Finished request 4. Going to the next request Waking up in 3.5 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=239, length=273 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb0893186c6b10255917bdeca99 EAP-Message = 0x0206003219001703010027a6784f0a6407aa8060b50026ac58d5f4dc07b743cf774080b0e4de533093eda7d924b25de04dec Message-Authenticator = 0xda9123f296bc3c3a0d63639b2a7fbc55 +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 6 length 50 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - CITYHALL\Администратор [peap] Got tunneled request EAP-Message = 0x0206001b014349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 server { PEAP: Got tunneled identity of CITYHALL\Администратор PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to CITYHALL\Администратор Sending tunneled request EAP-Message = 0x0206001b014349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "CITYHALL\\\300\344\354\350\355\350\361\362\360\340\362\356\360" Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [ntdomain] Looking up realm "CITYHALL" for User-Name = "CITYHALL\Администратор" [ntdomain] Found realm "CITYHALL" [ntdomain] Adding Stripped-User-Name = "Администратор" [ntdomain] Adding Realm = "CITYHALL" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 6 length 27 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010700301a0107002b107b7305ea3d639e01377b94165b681bd34349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8fe5640c8fe27eb8d28b73f97bdd495d [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010700301a0107002b107b7305ea3d639e01377b94165b681bd34349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8fe5640c8fe27eb8d28b73f97bdd495d [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 239 to 10.39.0.31 port 8021 EAP-Message = 0x010700471900170301003c9fab18041f649ec70fd959e26c8c64c5352072aba84b45fb915c0a3d15285cbed97e2138bbad857f7ebcec0e5343c9bd53f6b23d65442972e3d2eeb7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb0883086c6b10255917bdeca99 Finished request 5. Going to the next request Waking up in 3.3 seconds. rad_recv: Access-Request packet from host 10.39.0.31 port 8021, id=240, length=327 Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" User-Name = "CITYHALL\\РђРґРјРёРЅРёСЃС‚СЂР°С‚РѕСЂ" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" State = 0x8d379fb0883086c6b10255917bdeca99 EAP-Message = 0x020700681900170301005da909dcf8173126b7ea1d4e916dac8852c048e706f0d1daa8fd70db91b9cd6b46caf88e50e4d91c0769209604f568bb6dbb9febdf9c5e58b04f90e7535b61a0b6c7d31d323dcab7b42425688402b194a0d3885662b5f11dea9b78dac3d2 Message-Authenticator = 0x708d7f3eb810cc33c716ca7794e3a122 +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 7 length 104 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020700511a0207004c3186d476f9cd2a50a117453e30b8c0a9ee00000000000000003fa59f14170c3c64156be08dce431349620d99bc9f74cb79004349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 server { PEAP: Setting User-Name to CITYHALL\Администратор Sending tunneled request EAP-Message = 0x020700511a0207004c3186d476f9cd2a50a117453e30b8c0a9ee00000000000000003fa59f14170c3c64156be08dce431349620d99bc9f74cb79004349545948414c4c5cc0e4ece8ede8f1f2f0e0f2eef0 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "CITYHALL\\\300\344\354\350\355\350\361\362\360\340\362\356\360" State = 0x8fe5640c8fe27eb8d28b73f97bdd495d Framed-MTU = 1466 NAS-IP-Address = 10.39.0.31 NAS-Identifier = "D-Link" Service-Type = Framed-User NAS-Port = 25 NAS-Port-Type = Ethernet NAS-Port-Id = "ether25_385" Called-Station-Id = "00-15-e9-89-df-33" Calling-Station-Id = "90-e6-ba-19-a6-b4" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [ntdomain] Looking up realm "CITYHALL" for User-Name = "CITYHALL\Администратор" [ntdomain] Found realm "CITYHALL" [ntdomain] Adding Stripped-User-Name = "Администратор" [ntdomain] Adding Realm = "CITYHALL" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 7 length 81 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv2 for Администратор with NT-Password [mschap] expand: --username=%{mschap:User-Name} -> --username=Администратор [mschap] expand: --domain=%{mschap:NT-Domain} -> --domain=CITYHALL [mschap] mschap2: 7b [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=86c94cfffd3f36fa [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=3fa59f14170c3c64156be08dce431349620d99bc9f74cb79 Exec-Program output: Invalid parameter (0xc000000d) Exec-Program-Wait: plaintext: Invalid parameter (0xc000000d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 240 to 10.39.0.31 port 8021 EAP-Message = 0x010800261900170301001b1bde4546a9bbb84b9d5584803374118b54f1de192a880f8b560f02 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8d379fb08b3f86c6b10255917bdeca99 Finished request 6. ... The ntlm_auth string in mschap module has the following format: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --domain=%{mschap:NT-Domain} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" ntlm_auth succeeds in authentication if I use it separately. What's wrong with that "invalid parameter"? How do I trace it?

3 6

Proxying based on a regex
by Charles Plater 15 Aug '11

15 Aug '11

I'm trying to configure our FreeRadius (2.1.9) server to proxy based on the format of the ID. I have a working regex that determines the domain to which the request should be sent, but I'm having a hard time figuring out the syntax of the proxy statement. Here's what I've tried: if (User-Name !~ <REGEX>) { proxy: domain.name else { proxy: LOCAL } } FWIW, I can successfully authenticate do the "domain.name" realm by using userid(a)domain.name. Can anyone offer any suggestions? Thanks in advance. -- Charles Plater Lead Application Technical Analyst Internet Services +1-313-577-4620 ab3189(a)wayne.edu

5 9

how to refer to default virual server via dynamic clients sql lookup
by Łukasz Kostka 15 Aug '11

15 Aug '11

hi i have 2 virtual servers active: default dynamic-clients i wan to lookup every nas via sql dynamic-clients. my dynamic-clients configuration file client dynamic { ipaddr = 0.0.0.0 netmask = 0 lifetime = 3600 } server dynamic_client_server { authorize { if ("%{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}") { update control { # # Echo the IP. FreeRADIUS-Client-IP-Address = "%{Packet-Src-IP-Address}" FreeRADIUS-Client-Shortname = "%{sql: SELECT shortname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}" FreeRADIUS-Client-Secret = "%{sql: SELECT secret FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}" FreeRADIUS-Client-NAS-Type = "%{sql: SELECT type FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}" FreeRADIUS-Client-Virtual-Server = "%{sql: SELECT server FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}" } } ok } } doesn't matter if i have NULL or just empty string or default in column server in table nas freeradius in -X mode says: rad_recv: Access-Request packet from host 10.194.3.239 port 35419, id=31, length=85 Service-Type = Login-User User-Name = "ukasz" User-Password = "dupa" Calling-Station-Id = "10.194.3.230" NAS-Identifier = "admini-pokoj" NAS-IP-Address = 10.194.3.239 server { No such virtual server "" } # server Using Post-Auth-Type Reject No such virtual server "" if i comment the line with # FreeRADIUS-Client-Virtual-Server = "%{sql: SELECT server FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}" freeradius lookups the default server but it is not whot i want. i have found a dirty hack how to solve this problem: i have basicly created a file default-default file in /etc/sites-enabled/ and it countains: server default-default { $INCLUDE ${confdir}/sites-available/default } and when i type default-default in sql collumn server, my authentication requests goes to default server. maybe i am doing something worong. i could not find any info how to refer to default virtual server in sql. dpkg -l | grep freera ii freeradius 2.1.10+dfsg-2 a high-performance and highly configurable RADIUS server ii freeradius-common 2.1.10+dfsg-2 FreeRADIUS common files ii freeradius-mysql 2.1.10+dfsg-2 MySQL module for FreeRADIUS server ii freeradius-utils 2.1.10+dfsg-2 FreeRADIUS client utilities ii libfreeradius2 2.1.10+dfsg-2 FreeRADIUS shared library cat /etc/debian_version 6.0.1

3 6

Questions about status counters
by Tamás Becz 15 Aug '11

15 Aug '11

Hi, I'm trying to collect some statistics about my freeradius servers with nagios. Before I've been doing this with some perl code digging through the logs, and doing stats (plus generating gnuplot graphs out etc) but I'd rather have something more flexible, so I tought I'd put together some small script for nagios that can query those stats more flexible. Basically I just want to see successful and unsuccesful logins, maybe home server deads and alives, nothing really fancy. We are actually just proxying requests so I just need to see the ammount of logins through us, and the "health" of the service (we have had trouble with the party doing the real authentication, and high faliure rate is a good sign I can look for). I can set up the status server all right, but I'm a bit stuck with how to interpret the things I get. I've been through some searching of docs, wiki and mans, but couldn't get a pointer. 1) Is there some documentation on the values I got there? I of course see dictionary.freeradius, and the names are pretty self-explanatory, but we all know devil is in the details :) 2) If I understand well, then these counters are simply monotonously increasing values. I can live with that of course, and do the math. I just like to see if my assumption is correct. 3) Also, I see that if the server is restarted, the values are reset to 0. Can freeradius be told not to do this, but retain the values? Currently we do restarts on a regular basis now and then, to update a clients.conf file. I suppose I more or less could handle this, but at least would lose the stats that happened after the last check, but before the restart. 4) I'm I looking at the good direction at all, or should I rather start reading up how accounting works or something else? Really, I'm good with and RTFM as long as you could point me to where to look :) (Oh, I'm using 2.1.10, but plan to update to 2.1.11 in the near future). Thanks! tamas

3 4