- Freeradius-Users - lists.freeradius.org

Freeraidus 2
by Usuário do Sistema 05 Mar '11

05 Mar '11

Hello everyone, I'm Maicon from Brazil. I'm in a project with Freeradius. I want to deployment authentication with certificate from my wireless users EAP-TLS but I'm finding some difficult. there is a good how to for version 2 ?? I've started with version 1.x but decided to change for version 2 and I'm not finding where I set the LDAP conection. at the older version it was inside radiusd.conf. anybody help me ?? thank!

4 3

mschap with ntlm_auth and Active Directory
by robert22 05 Mar '11

05 Mar '11

I am trying to setup freeRadius to process requests from our Wireless Controller. The controller uses the wireless devices MAC address as the username, and a predefined password. These MAC addresses all excist in Active Directory as user accounts, with the same password set. This works fine with our current Windows 2003 Server but Im trying to get it going with FreeRadius. the mschap module line in MSCHAP for ntlm_auth is as such: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MY.ACTUAL.DOMAIN} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" the ntlm_auth module itself contains: program = "/usr/bin/ntlm_auth --request-nt-key --domain=MY.ACTUAL.DOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" I havent changed anything to the users file except adding in a test local user as part of the initial FreeRadius install guide, and uncommenting the DEFAULT Auth-Type = ntlm_auth line for using the following to test: root@FREERADIUS:/etc/freeradius# radtest localhost 0 sharedsecret which seems to work: rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=217, length=20 but when I set the Wireless controller to point to the FreeRadius server, this is the debug log: ----start---- rad_recv: Access-Request packet from host 10.0.9.101 port 32987, id=83, length=163 User-Name = "001E52805980" MS-CHAP-Challenge = 0x86acd2fc97136970 MS-CHAP-Response = 0x33013cd70c5db14d0ff0ba01097baeee613883c7711e96028461bc25975c513bb7dc3b2b1068d2ac048fe46e52a840f4f662 NAS-IP-Address = 0.0.0.0 NAS-Port = 0 NAS-Port-Type = Wireless-Other NAS-Identifier = "redlan1" Calling-Station-Id = "001E52805980" Called-Station-Id = "001F457E67A8" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [suffix] No '@' in User-Name = "001E52805980", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=001E52805980 [mschap] No NT-Domain was found in the User-Name. [mschap] expand: %{mschap:NT-Domain} -> [mschap] ... expanding second conditional [mschap] expand: --domain=%{%{mschap:NT-Domain}:-MY.ACTUAL.DOMAIN} -> --domain=MY.ACTUAL.DOMAIN [mschap] mschap1: 86 [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=86acd2fc97136970 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=bc25975c513bb7dc3b2b1068d2ac048fe46e52a840f4f662 Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] MS-CHAP-Response is incorrect. ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 001E52805980 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request ----END---- Hoping somone can point me in the right direction of where I might have messed up, or what further readiing I might need to do? Many Thanks Robert -- View this message in context: http://freeradius.1045715.n5.nabble.com/mschap-with-ntlm-auth-and-Active-Di… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 15

Caching techniques with ntlm_auth usage? (EAP-PEAP-MSchapV2)
by John Douglass 05 Mar '11

05 Mar '11

Group, Recently, my AD servers were patched by another support group and this caused a (small but noticeable) service outage for our WPA radius services (Radius 2.1.9) I am curious how others who are using AD as their backends have either configured smb.conf/winbind/radius in order to do high availability for authentications. I do have configured: smb.conf password server = server1.ad.gatech.edu server2.ad.gatech.edu But that didn't seem to help with failures. What I am seeing in the logs (during outages such as these are) Mar 3 06:47:55 dvlanb radiusd[17093]: Discarding duplicate request from client My-WiSM port 32770 - ID: 95 due to unfinished request 466 Mar 3 06:47:55 dvlanb radiusd[17093]: Child PID 17274 is taking too much time: forcing failure and killing child. I am pretty certain this is from a non-responsive "ntlm_auth" call. I have searched for options to winbind and ntlm_auth that might assist in caching authentication requests so that slight hiccups like these do not disturb our users. I thought of possibly writing a custom "ntlm_auth" script that performs a cache lookup and responds correctly as ntlm_auth regularly would and if not valid cache entry, then try the real ntlm_auth command and then add a cache entry. Does someone have any suggestions on configuration changes on radius or samba that might help? from my sites-available/wpa-services file: authorize { # The preprocess module takes care of sanitizing some bizarre attributes in # the request, and turning them into attributes which are more standard. preprocess # # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP # authentication. eap { ok = return } # # Look in an SQL database. The schema of the database is meant to mirror the "users" file. sqlwpa } # Authentication. authenticate { # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # Allow EAP authentication. eap } Thanks in advance, - John Douglass, Senior Systems Architect Georgia Institute of Technology

4 3

Line is not in attribute = value format
by Felix Sanchez 04 Mar '11

04 Mar '11

Hi, I trying to write some unlang code inside the authorize section inside the radiusd.conf but i keep receive "Line is not in 'Attribute = value' format if (Called-Station-Id == "rlmA") { ..... } Basicly i need to proxy the request using the Called-Station-Id to another radius server, any suggestion is apreciated. regards,,

2 1

radius start up error
by Raymond Norton 04 Mar '11

04 Mar '11

I have a tendency to over complicate things with freeradius, so I will just post my error on my first start up: I understand the dummy certs are created when launching radiusd -X, but not sure how to fix the missing dh file without creating new ones. Is the unknown module "eap" error because of the dh error? (This is a MAC server) tls: dh_file = "/private/etc/raddb/certs/dh" tls: random_file = "/private/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap_tls: Unable to open DH file - /private/etc/raddb/certs/dh rlm_eap: Failed to initialize type tls radiusd.conf[10]: eap: Module instantiation failed. radiusd.conf[1954] Unknown module "eap". radiusd.conf[1897] Failed to parse authenticate section.

3 6

FW: Use Hint file to proxy
by Difan Zhao 04 Mar '11

04 Mar '11

Hi Alan Dekok or anyone, I haven't got a reply on this one yet... I was able to do it before but not anymore... I'm really curious to know why... Thank you! Difan ________________________________ From: freeradius-users-bounces+difan.zhao=guest-tek.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+difan.zhao=guest-tek.com@lists.freeradius.org] On Behalf Of Difan Zhao Sent: March-02-11 9:01 AM To: FreeRadius users mailing list Subject: Use Hint file to proxy Hi experts, Long time no talk! I have another dilemma. For some reasons I want to try to use the hints file to do Proxy (the normal way of configuring realm and proxy.conf file works). So the following is my config: =============== hints =================== DEFAULT User-Name =~ "^host\/.*\.gtcorp\.com$" Hint = "Marriott" =============== users =================== DEFAULT Hint == "Marriott", Proxy-To-Realm := "~\.gtcorp\.com$" =============== proxy.conf =================== .... realm "~\.gtcorp\.com$" { nostrip auth_pool = Marriott_Auth_Pool acct_pool = Marriott_Acct_Pool } ============== module/realm ================ realm Marriott { format = suffix delimiter = "/" } Then I commented out the "Marriott" realm in the "authorize" section in the default server so the settings in the "realm" file shouldn't do anything. ============= sites-available/default ============== authorize { ... # Marriott ... } In the radius -X log I do see the requests are sent to the proxy server but I also see the following abnormal logs. The complete log is also attached. [eap] No pre-existing handler found ... rlm_eap: No EAP session matching the State variable. [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request [eap] Failed in handler ++[eap] returns invalid Failed to authenticate the user. So is it possible to use the hints file to do proxy or I'm totally out of my mind?? If it's possible where I could do wrong? Thanks a lot! [cid:image003.gif@01CBDA45.6D237530]Difan Zhao M.Eng | CCNA CCNP CCSP | Network Engineer T: 403-509-1010 ext 3048 | M: 403-689-7514 | F: 403.509.1011 difan.zhao(a)guest-tek.com<mailto:difan.zhao@guest-tek.com> | www.guest-tek.com<http://www.guest-tek.com> The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

1 0

Radius not accepting user
by Matthew Boyle 04 Mar '11

04 Mar '11

Hi, I'm having a problem with my radius server with TLS and TTLS authentication protocols. My current configuration works with simple MD5 and PEAP but fails with TLS and TTLS. I am using freeradius v2.1.10. Previously I was using freeradius v2.1.9 on a different linux box and didn't have the same problems. At the time I was successfully using the same configuration files for all the protocols. I can't figure out what is different now. The client is not a windows platform either so I don't think it's the common windows issues mentioned on the FAQ even though the warning message within the output would imply this. Again, I never saw this problem when running with the older v2.1.9 version of freeradius. As suggested on the wiki, i have included the suggested output below. Thanks. Matt The contents of my users file: testuser Cleartext-Password := "whatever" # md5 user user2 Cleartext-Password := "testing" user3 Cleartext-Password := "testing" The output of my radtest: csahwreg4:/users/mboyle/ws/gash_main/testsuites/dot1x[84]> radtest -d /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/default/ testuser whatever localhost 1812 testing123 Sending Access-Request of id 4 to 127.0.0.1 port 1812 User-Name = "testuser" User-Password = "whatever" NAS-IP-Address = 138.120.210.28 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=4, length=20 csahwreg4:/users/mboyle/ws/gash_main/testsuites/dot1x[85]> The debug output of the radiusd command: FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Nov 1 2010 at 11:19:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/radiusd.conf including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/proxy.conf including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/clients.conf including files in directory /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/ including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/attr_rewrite including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/krb5 including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/linelog including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/sql_log including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/expr including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/inner-eap including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/chap including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/ippool including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/ntlm_auth including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/files including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/preprocess including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/smbpasswd including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/echo including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/pam including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/mac2ip including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/pap including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/counter including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/mschap including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/sradutmp including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/checkval including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/mac2vlan including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/logintime including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/passwd including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/radutmp including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/cui including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/acct_unique including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/otp including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/unix including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/always including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/exec including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/detail including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/expiration including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/digest including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/ldap including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/smsotp including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/policy including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/realm including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/attr_filter including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/wimax including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/perl including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/etc_group including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/detail.example.com including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/sqlcounter_expire_on_login including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/detail.log including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/eap.conf including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/policy.conf including files in directory /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/ including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/control-socket including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default including configuration file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/inner-tunnel main { allow_core_dumps = no } including dictionary file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/dictionary main { prefix = "/usr/global" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/global/lib/freeradius-2.1.10" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run//radiusd.pid" checkrad = "/usr/global/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" login = "!root" password = "someadminpas" } client 192.168.255.0/24 { require_message_authenticator = no secret = "testing123" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/server.pem" certificate_file = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/server.pem" CA_file = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/ca.pem" private_key_password = "whatever" dh_file = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/dh" random_file = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/files files { usersfile = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/users" acctusersfile = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/acct_users" preproxy_usersfile = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/preprocess preprocess { huntgroups = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/huntgroups" hints = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.255.1 port 49312, id=119, length=93 User-Name = "testuser" NAS-IP-Address = 138.120.210.29 NAS-Port = 38010880 State = 0xdd49e7f3de30fe9757a3fc0fc6955614 EAP-Message = 0x0277000d017465737475736572 Message-Authenticator = 0xb349b01f57c2fe1a0aec36df96359f1c # Executing section authorize from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 119 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry testuser at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 119 to 192.168.255.1 port 49312 EAP-Message = 0x017800061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xec965d8cecee44fb4d8bbceb4458d522 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.255.1 port 49312, id=119, length=192 Cleaning up request 0 ID 119 with timestamp +28 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xec965d8cecee44fb did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "testuser" NAS-IP-Address = 138.120.210.29 NAS-Port = 38010880 State = 0xec965d8cecee44fb4d8bbceb4458d522 EAP-Message = 0x0278007019800000006616030100610100005d03014d70058ee0655af152c0e724b6741c74136e3d548354be1e963f370b2234bf2d00003600390038003500160013000a00330032002f0007006600050004006300620061001500120009006500640060001400110008000600030100 Message-Authenticator = 0x42d70e806767446718452f51ccc1e5e5 # Executing section authorize from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 120 length 112 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 102 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0061], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 119 to 192.168.255.1 port 49312 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xec965d8cedef44fb4d8bbceb4458d522 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.255.1 port 49312, id=119, length=86 Cleaning up request 1 ID 119 with timestamp +28 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xec965d8cedef44fb did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "testuser" NAS-IP-Address = 138.120.210.29 NAS-Port = 38010880 State = 0xec965d8cedef44fb4d8bbceb4458d522 EAP-Message = 0x027900061900 Message-Authenticator = 0x6c18d5570978030e54e5db55c56387b4 # Executing section authorize from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 121 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 119 to 192.168.255.1 port 49312 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xee81783cfb132a81 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xec965d8ceeec44fb4d8bbceb4458d522 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.255.1 port 49312, id=119, length=86 Cleaning up request 2 ID 119 with timestamp +28 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xec965d8ceeec44fb did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "testuser" NAS-IP-Address = 138.120.210.29 NAS-Port = 38010880 State = 0xec965d8ceeec44fb4d8bbceb4458d522 EAP-Message = 0x027a00061900 Message-Authenticator = 0x9254622fc70a462364a5ff4a5ceb68a9 # Executing section authorize from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 122 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 119 to 192.168.255.1 port 49312 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x93f445f895b15e6bb06aaa7792f8c766d6a64d85d4d023bc2a839709a251c94b7fe2225d0d7964835c1932a401bd967ec6fdca56f22764dbf4af68f26339c25f0dec4ab816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xec965d8cefed44fb4d8bbceb4458d522 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.255.1 port 49312, id=119, length=97 Cleaning up request 3 ID 119 with timestamp +28 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xec965d8cefed44fb did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "testuser" NAS-IP-Address = 138.120.210.29 NAS-Port = 38010880 State = 0xec965d8cefed44fb4d8bbceb4458d522 EAP-Message = 0x027b001119800000000715030100020233 Message-Authenticator = 0x249feeaa383c0a20a88c331e98abbb41 # Executing section authorize from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 123 length 17 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 7 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Alert [length 0002], fatal decrypt_error TLS Alert read:fatal:decrypt error TLS_accept: failed in SSLv3 read client certificate A rlm_eap: SSL error error:1409441B:SSL routines:SSL3_READ_BYTES:tlsv1 alert decrypt error SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect (TLS Alert read:fatal:decrypt error): [testuser] (from client 192.168.255.0/24 port 38010880) Using Post-Auth-Type Reject # Executing group from file /users/mboyle/ws/gash_main/testsuites/dot1x/raddbs/tls/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> testuser attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 4 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 4 Sending Access-Reject of id 119 to 192.168.255.1 port 49312 EAP-Message = 0x047b0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 4.9 seconds. Cleaning up request 4 ID 119 with timestamp +29 Ready to process requests.

2 2

Can I group users in the users file like in the SQL database?
by Difan Zhao 04 Mar '11

04 Mar '11

Hi experts, Another quick question: Can I group users in the "users" file and assign the group reply attributes instead of to each individual user? I tried the following config but failed (which maybe completely nonsense)... "test" Cleartext-Password := "test" Group := abc Fall-Through = yes abc Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "851" Tunnel-Preference:0 = 0 Thanks! [cid:image003.gif@01CBD9A2.44D721B0]Difan Zhao M.Eng | CCNA CCNP CCSP | Network Engineer T: 403-509-1010 ext 3048 | M: 403-689-7514 | F: 403.509.1011 difan.zhao(a)guest-tek.com<mailto:difan.zhao@guest-tek.com> | www.guest-tek.com<http://www.guest-tek.com> The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

2 2

How to add attributes on the reply from the home server
by Difan Zhao 04 Mar '11

04 Mar '11

Hi guys, Sorry for so many questions ... Everything was working fine until I was told to not use the SQL DB but use the users file instead... That's why I start to have all these questions... Anyway I need to proxy some requests to remote home server. I also need to assign the users to specific VLANs (with some attributes) if they are successfully authenticated by the remote home server. When I was using the SQL Alan told me to uncomment "sql.authorize" in the "post-auth" section in the sites-available/default server configuration. Now I have to use the users file. Is there a way to achieve the same result? Right now my server just forwards the "Access-accept" to the switch and ignores all the VLAN attributes associated with the username set in my "users" file... Please help! Thanks! [cid:image003.gif@01CBD9B9.1BD2FB60]Difan Zhao M.Eng | CCNA CCNP CCSP | Network Engineer T: 403-509-1010 ext 3048 | M: 403-689-7514 | F: 403.509.1011 difan.zhao(a)guest-tek.com<mailto:difan.zhao@guest-tek.com> | www.guest-tek.com<http://www.guest-tek.com> The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

2 1

Cleartext-Password := "%{User-Name}" in the users file. Possible?
by Difan Zhao 03 Mar '11

03 Mar '11

Hi experts, I want to try another way to authenticate devices by their MAC addresses. I don't really care about the security and just try to make the configuration easy. Here is my configuration: ==== hints ===== DEFAULT User-Name =~ "001422.*" Hint = "STB" ===== users ===== DEFAULT Hint == "STB", Cleartext-Password := "%{User-Name}" Then I use the radtest program to test the setup and it failed... radtest 001422111111 001422111111 localhost 1812 test123 Both lines in the hints and users file are match based on the radius -X output. However the password in the check attribute is not replaced with the username... Please help, thanks! Here is the radius -X output: rad_recv: Access-Request packet from host 127.0.0.1 port 16011, id=123, length=64 User-Name = "001422111111" User-Password = "001422111111" NAS-IP-Address = 127.0.0.1 NAS-Port = 1812 +- entering group authorize {...} [preprocess] expand: %{User-Name} -> 001422111111 [preprocess] hints: Matched DEFAULT at 1 ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Marriott] No '/' in User-Name = "001422111111", looking up realm NULL [Marriott] No such realm "NULL" ++[Marriott] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP +- entering group PAP {...} [pap] login attempt with password "001422111111" [pap] Using clear text password "%{User-Name}" [pap] Passwords don't match ++[pap] returns reject Failed to authenticate the user. Login incorrect (rlm_pap: CLEAR TEXT password check failed): [001422111111/001422111111] (from client 127.0.0.1/32 port 1812) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 001422111111 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 123 to 127.0.0.1 port 16011 Waking up in 4.9 seconds. [cid:image002.gif@01CBD982.DFF851C0]Difan Zhao M.Eng | CCNA CCNP CCSP | Network Engineer T: 403-509-1010 ext 3048 | M: 403-689-7514 | F: 403.509.1011 difan.zhao(a)guest-tek.com<mailto:difan.zhao@guest-tek.com> | www.guest-tek.com<http://www.guest-tek.com> The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.

3 4