- Freeradius-Users - lists.freeradius.org

global hash variable perl
by Vinh Nguyen 02 Mar '11

02 Mar '11

hi all, I was able to setup my freeradius to use perl and mysql. Things are working ok. I wanted to use a global hash variable to store information. This way all other requests can also access this hash variable. Is this doable? I know you can use mysql for this purpose, but i wanted to reduce the # of mysql hits. Thanks. -- Computer Science B.S. at Texas A&M C# .Net Developer Server Analyst.

4 9

IP Pool for Ethernet
by Groebl, Laurence (Laurence) 02 Mar '11

02 Mar '11

Hello, I aim at setting up an IPsec tunnel between an IPsec client and an IPsec Gateway using IKEv2 and EAP-TLS for authentication. I am using freeradius as RADIUS server, and the authentication is working well. Currently the Gateway is assigning an IP address from a specific pool to the IKEv2 client. However I'd like the RADIUS server to assign this IP address and send it within the Access-Accept in the Framed-IP-Address attribute (to avoid configuring the IPsec Gateway with the tunnel address). I saw that FreeRADIUS has several IP Pool modules which have the ability to assign dynamic IP address to RADIUS sessions types where the NAS has control over the the users IP, however not for Ethernet. Is there a way (e.g. using DHCP) to assign an IP address to the Ipsec client and send it the Access-Accept in the Framed-IP-Address attribute? Best regards, Laurence

3 5

Clarification / Confirmation needed re: FreeRadius against Active Directory
by Moe, John 02 Mar '11

02 Mar '11

I'm setting up an Ubuntu server (10.04LTS amd64) with FreeRadius (v2.1.8 from apt-get) to use as an authenticator against Active Directory for our HP ProCurve switches. I've gotten the server on to our Active Directory domain, and have begun the setup of the FreeRadius server. I've even managed to allow login to a test ProCurve switch using my AD username. Now, I've read a lot of configuration pages (for Ubuntu, Samba, Winbind, and FreeRadius, to name a few) in the last few days, and my head's spinning a bit, and I'd like to make sure I'm doing this right, and I've managed to grasp a few things... Should I be using ntlm_auth, or mschap as my Auth-Type for the ProCurve switches? Currently, I'm using: # HP ProCurve Switch DEFAULT Auth-Type = ntlm_auth, NAS-Port-Type == Virtual, Service-Type == NAS-Prompt-User Service-Type = 6 as my line in the "users" file, and it works, but I want to make sure it's a) doing what I think it's doing, and b) the right way to do it. >From some of my reading, it seemed to indicate that Auth-Type shouldn't need to be set, that FreeRadius should be able to figure it out, but if I leave it out, it appears to match the rest of the rule (NAS-Port-Type and Service-Type), but I get a message saying: Tue Mar 1 09:54:03 2011 : Info: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Tue Mar 1 09:54:03 2011 : Info: Failed to authenticate the user. I've put a single "=" in for the Auth-Type, because the documentation seems to say that with "=", it'll only add that to the request if no other Auth-Type was previously set, so that seems to say that the ProCurve switch isn't requesting ntlm_auth. How is FreeRadius supposed to figure it out, then? Also, I'd like to match the rule (or are they called policies?) against an Active Directory group name, so that only members of a specific group can get access into the switch. I can't seem to find any way match for that; is it possible? Any help or pointers would be appreciated. Thanks. John H. Moe Network Support - Hatch IT HATCH Tel: +61 (7) 3166 7777 Direct: +61 (7) 3166 7684 Fax: +61 (7) 3368 3754 Mobile: +61 438 772 425 61 Petrie Terrace, Brisbane, Queensland Australia 4011 ***************************** NOTICE - This message from Hatch is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential or proprietary. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, arrive late or contain viruses. By communicating with us via e-mail, you accept such risks.� When addressed to our clients, any information, drawings, opinions or advice (collectively, "information") contained in this e-mail is subject to the terms and conditions expressed in the governing agreements.� Where no such agreement exists, the recipient shall neither rely upon nor disclose to others, such information without our written consent.� Unless otherwise agreed, we do not assume any liability with respect to the accuracy or completeness of the information set out in this e-mail.� If you have received this message in error, please notify us immediately by return e-mail and destroy and delete the message from your computer.

3 5

Free Radius Issues
by Chris Kilian 02 Mar '11

02 Mar '11

Hi Guys I am new to Freeradius and have got it working with Mysql , however run into an issue whereby I am seeing this for all requests rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [chrisk/password] (from client seccom port 0) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> chrisk attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Can anyone help or let me know what other info may be required Thanks

4 4

RE: Clarification / Confirmation needed re: Free Radius against Active Directory
by Sallee, Stephen (Jake) 02 Mar '11

02 Mar '11

Just a word of warning, manually setting Authtype = ANTHING is usually a bad idea. FR is really good about figuring out what to do all on its own, if you force an auth type it will very likely break something else. Jake Sallee Network Engineer University of Mary Hardin-Baylor Fone: 254-295-4658 Phax: 254-295-4221 > -----Original Message----- > From: freeradius-users-bounces+jake.sallee=umhb.edu(a)lists.freeradius.org > [mailto:freeradius-users- > bounces+jake.sallee=umhb.edu(a)lists.freeradius.org] On Behalf Of Moe, > John > Sent: Tuesday, March 01, 2011 3:26 PM > To: FreeRadius users mailing list > Subject: RE: Clarification / Confirmation needed re: FreeRadius against > ActiveDirectory > > > -----Original Message----- > > From: freeradius-users-bounces+jmoe=hatch.com.au(a)lists.freeradius.org > > [mailto:freeradius-users- > > bounces+jmoe=hatch.com.au(a)lists.freeradius.org] On Behalf Of Alan > > bounces+DeKok > > Sent: Tuesday, 1 March 2011 5:51 PM > > To: FreeRadius users mailing list > > Subject: Re: Clarification / Confirmation needed re: FreeRadius > > against ActiveDirectory > > > > Moe, John wrote: > > > Now, I've read a lot of configuration pages (for Ubuntu, Samba, > > Winbind, > > > and FreeRadius, to name a few) in the last few days, and my head's > > > spinning a bit, and I'd like to make sure I'm doing this right, and > > I've > > > managed to grasp a few things... > > > > The definitive guide is here: > > > > http://deployingradius.com/documents/configuration/active_directory.ht > > m > > l > > > > It's simple, clear, and contains just enough information to allow > > you to get it to work. > > > > Alan DeKok. > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > Yeah, the information in that one is, as you said, simple and "just enough". > However, it doesn't address either of the two questions I asked. > > 1) Is setting "Auth-Type = ntlm_auth" the correct way for doing what I want, > or have I mis-configured something so that FreeRadius could work out that it > needs to use ntlm_auth on its own? > 2) How do I match a rule against AD Group membership? This one was > answered in a previous reply, and I think I can work out the implementation > details from there, I just need to do some work and testing. > > If anyone knows the answer to the first question, I'd appreciate it. > > John H. Moe > Network Support - Hatch IT > HATCH > Tel: +61 (7) 3166 7777 > Direct: +61 (7) 3166 7684 > Fax: +61 (7) 3368 3754 > Mobile: +61 438 772 425 > 61 Petrie Terrace, Brisbane, Queensland Australia 4011 > > ***************************** > NOTICE - This message from Hatch is intended only for the use of the > individual or entity to which it is addressed and may contain information > which is privileged, confidential or proprietary. > Internet communications cannot be guaranteed to be secure or error-free as > information could be intercepted, corrupted, lost, arrive late or contain > viruses. By communicating with us via e-mail, you accept such risks.? When > addressed to our clients, any information, drawings, opinions or advice > (collectively, "information") contained in this e-mail is subject to the terms > and conditions expressed in the governing agreements.? Where no such > agreement exists, the recipient shall neither rely upon nor disclose to others, > such information without our written consent.? Unless otherwise agreed, we > do not assume any liability with respect to the accuracy or completeness of > the information set out in this e-mail.? If you have received this message in > error, please notify us immediately by return e-mail and destroy and delete > the message from your computer.

2 1

Radsec support on FR?
by Panagiotis Georgopoulos 01 Mar '11

01 Mar '11

Hello there, Judging from the website and the archives in the mailing list, native support for Radsec is planned on FR. Is there anyone actively working on this? Is there any timescale for this to be streamed on the main codebase? Thanks a lot in advance, Panos

4 7

Open Directory Howto
by Raymond Norton 28 Feb '11

28 Feb '11

Is there a good howto on setting up freeradius to work with Open Directory? (Freeradius will be on stand alone box)

2 2

Radius - Ldap
by Kyle Jake Plimack 28 Feb '11

28 Feb '11

I've configured radius to use ldap for authorization and authentication. Authorization works fine, but will allow access to authorized users without a correct password. Why? ldap stores passwords using SSHA encryption. Is there any way to: a. provide radius with the key/salt so it can compare the passwords properly b. have radius bind as the user to check that the password is correct? c. option I haven't thought of yet? Kyle Plimack KYLE J PLIMACK / SYSTEMS ADMINISTRATOR 415.531-9827 www.saymedia.com www.facebook.com/saymedia www.twitter.com/saymediainc

2 1

Fwd: FreeRadius 2.1.10 does NOT send VSA's or other attributes back in the Access-Accept (for EAP-TTLS)
by Amit Nath 28 Feb '11

28 Feb '11

hello, I am attempting to authenticate end-users via EAP-TTLS (with EAP-MD5) as the inner method. I have noticed that the Access-Accept Message does NOT contain the right VSA attributes, nor the dynamic VLAN assignments. Infact it would appear that the Microsoft MS-MPPE-Rec/Send Key attributes are sent back ? Sending Access-Accept of id 6 to 172.23.35.62 port 62548 MS-MPPE-Recv-Key = 0x57718ff5e99e08f770ee3832bd9edf5cf3f010be6f9d200e86bb9afa55ca3c45 MS-MPPE-Send-Key = 0x946a940cd99bb88a10de103fec50b1634f14869cc8f4da3788e099d5896cf272 EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "data1" Now what makes this really interesting if I change my client's authentication type to EAP-MD5 only the Radius Server Sends back an Access-Accept message with Vendor VSA's and the dynamic-VLAN assignments (As per the screen capture below) Sending Access-Accept of id 2 to 172.23.35.62 port 55033 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "4" EAP-Message = 0x03020004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "data1" Please advise if I have configured something incorrectly ? As everything works correctly for EAP-MD5, but not for EAP-TTLS (with EAP-MD5 inner authentication) Attached are the full server debug trace for both scenarios. thanks Amit NOTES: - FreeRadius 2.1.10 (installed via the "yum install freeradius") command - Platform Fedora Linux (v14) 2.6.35.6-45.fc14.i686 - below is an excerpt of my users file for the user "data1" data1 Cleartext-Password := "data1" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 4,

2 2

store and proxy accounting packets
by Waqas Toor 28 Feb '11

28 Feb '11

Hello Community, I want to store accounting packets to local database and proxy same accounting packet to some other accounting listener server. I couldn't make sense out of copy-acct-to-home-server that where I can define the other accounting listening server. also if I use robust-proxy-accounting I am unable to understand the pass-through accounting, is it going to save to local accounting as well ? Thank you Waqas Toor

2 11