- Freeradius-Users - lists.freeradius.org

DHCP
by Rodrigo Prieto 03 Aug '25

03 Aug '25

Hello, I wanted to know if there is any way to configure the DHCP server to send DDNS updates to a Bind9 server, similar to how Kea updates the forward and reverse zones. I am testing the DHCP server function and it is easier to configure than Kea — with medium-complexity configurations, Kea already requires a large JSON file — so I am looking into this alternative. Thank you.

2 2

RadSec | Status-Server Support
by Cyrus Humphreville 02 Aug '25

02 Aug '25

Hi All! Does RadSec support Status-Server (I only see reference to UDP in RFC 5997)? In RFC 6614 for RadSec, however, I do see reference to Status-Server, but in practice, we can't seem to get it to work (probably PEBKAC). NAS (standalone Aruba AP) --> FreeRADIUS Proxy (macOS) --> Nginx VIP (TCP 2083) --> FreeRADIUS Servers (RHEL 9) The NAS sends RADIUS via UDP to the proxy, which then proxies it to TCP for RadSec. We were expecting the proxy itself to send Status-Server requests to the FreeRADIUS VIP, but it doesn't seem to do so, and we don't see any Status-Server attempts when the proxy is in debug. Many thanks in advance for any guidance!

2 1

Prevent FreeRADIUS from Writing to radpostauth Table
by Mike Diggins 31 Jul '25

31 Jul '25

I'm running FreeRADIUS 3 on Red Hat Linux with a MySQL backend. I want FreeRADIUS to only read from the database-no writes-since I'm syncing it to another server for redundancy and using a separate interface to manage user accounts. Everything works, but I see Access-Accept and Access-Reject entries being written to radpostauth. How can I stop this? -Mike

2 1

Unsure of linelog configuration
by David Lake 31 Jul '25

31 Jul '25

Hi I am trying to see all DHCP interactions (allocated, ack, remove, etc) and I have configured linelog. Radiusd -X shows all DHCP (lease time set to 7200 so I see an ACK every 2 hours). But my line log is only showing the first successful allocate. I have obviously mis-understood the syntax and positioning of linelog because it is basically working but not as I expected. Would welcome a pointer or two? I have this (and nothing else) in my linelog file: linelog linelog_dhcp{ filename = ${logdir}/dhcp.log escape_filenames = no permissions = 0600 format = "%t %{control:Module-Success-Message}" } … and this in my dhcp file: server dhcp { listen { # This is a dhcp socket. type = dhcp ipaddr = 192.168.1.1 src_ipaddr = 192.168.1.1 reply:DHCP-DHCP-Server-Identifier port = 67 interface = eth0 broadcast = no performance { skip_duplicate_checks = no } } dhcp DHCP-Discover { # The DHCP Server Identifier is set here since is returned in OFFERs update control { &DHCP-DHCP-Server-Identifier = 192.168.1.1 } dhcp_network dhcp_sqlippool linelog_dhcp update reply { DHCP-Message-Type = DHCP-Offer Packet-Dst-Port = 68 } } dhcp DHCP-Request { update control { &DHCP-DHCP-Server-Identifier = 192.168.1.1 } if (&request:DHCP-DHCP-Server-Identifier && \ &request:DHCP-DHCP-Server-Identifier != &control:DHCP-DHCP-Server-Identifier) { do_not_respond } update reply { &DHCP-Message-Type = DHCP-Ack Packet-Dst-Port = 68 } root@FreeRadius:/usr/local/etc/raddb/sites-enabled# cat dhcp # -*- text -*- server dhcp { listen { # This is a dhcp socket. type = dhcp ipaddr = 192.168.1.1 src_ipaddr = 192.168.1.1 reply:DHCP-DHCP-Server-Identifier port = 67 interface = eth0 broadcast = no performance { skip_duplicate_checks = no } } dhcp DHCP-Discover { # The DHCP Server Identifier is set here since is returned in OFFERs update control { &DHCP-DHCP-Server-Identifier = 192.168.1.1 } dhcp_network dhcp_sqlippool linelog_dhcp update reply { DHCP-Message-Type = DHCP-Offer Packet-Dst-Port = 68 } } dhcp DHCP-Request { update control { &DHCP-DHCP-Server-Identifier = 192.168.1.1 } if (&request:DHCP-DHCP-Server-Identifier && \ &request:DHCP-DHCP-Server-Identifier != &control:DHCP-DHCP-Server-Identifier) { do_not_respond } update reply { &DHCP-Message-Type = DHCP-Ack Packet-Dst-Port = 68 } dhcp_network dhcp_sqlippool_request linelog_dhcp } dhcp DHCP-Decline { dhcp_network update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject linelog_dhcp } dhcp DHCP-Inform { dhcp_network linelog_dhcp ok } # # For Windows 7 boxes # dhcp DHCP-Inform { update reply { Packet-Dst-Port = 68 DHCP-Message-Type = DHCP-ACK DHCP-DHCP-Server-Identifier = "%{Packet-Dst-IP-Address}" DHCP-Site-specific-28 = 0x0a00 } linelog_dhcp ok } dhcp DHCP-Release { dhcp_network update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject linelog_dhcp } dhcp DHCP-Lease-Query { if (&DHCP-Client-Hardware-Address) { } elsif (&DHCP-Your-IP-Address) { } elsif (&DHCP-Client-Identifier) { } else { update reply { &DHCP-Message-Type = DHCP-Lease-Unknown } ok return } if (notfound) { update reply { &DHCP-Message-Type = DHCP-Lease-Unknown } ok return } update reply { &DHCP-Message-Type = DHCP-Lease-Unassigned } linelog_dhcp } } Thank you David David Lake Visiting Professor 5G Innovation Centre (5GIC and 6GIC) Tel: +44 (0)7711 736784 Email: d.lake(a)surrey.ac.uk<mailto:%20d.lake@surrey.ac.uk> Web: surrey.ac.uk<http://www.surrey.ac.uk/?utm_medium=internal&utm_source=emailsignature&utm_…> [A blue text on a black background Description automatically generated]<http://www.surrey.ac.uk/?utm_source=emailsignature&utm_medium=internal&utm_…> James Clerk Maxwell Building, University of Surrey, Guildford, Surrey, GU2 7XH, UK

2 6

Wireless 802.1x with MAB as fallback and FreeRadius
by Rodrigo Antunes 23 Jul '25

23 Jul '25

Hello, I use EAP to authenticate wireless clients that support 802.1x. But we have some IoT devices that don't support 802.1x, is it possible to make them connect to the same SSID with some kind of fallback? I saw a lot of articles teaching how to do this in ISE. Basically you enable Mac Authentication Bypass in the wireless controller and then it sends the mac to the radius server, if the mac is invalid then it try 802.1x. I tried that, but when the client connects to the ssid It sends the MAC and is rejected by radius. It doesn't try 802.1x. Have anyone already use this? Here are some articles I found: https://community.cisco.com/t5/wireless/wireless-802-1x-with-mab-as-fallbac… Wireless MAB and 802.1X https://community.cisco.com/t5/wireless/cisco-wireless-mab-and-802-1x/td-p/…

4 19

TLS Cache
by Rodrigo Prieto 20 Jul '25

20 Jul '25

Hello, I'm currently working on configuring the TLS cache and noticed that, upon reconnection, the client rewrites both files (.asn1 and .vps) in the configured directory. From what I understand, it should reuse the information stored in those files to avoid reestablishing the TLS connection from scratch. Alan, I promise I’ve read the comments in the configuration files, but I’m still struggling to fully understand how it works. I’d really appreciate it if you could help clarify this for me. root@loli-pc:/var/log/freeradius/tlscache# ll total 24K drwxr-xr-x 2 freerad freerad 4,0K jul 19 07:54 . drwxr-x--- 4 freerad freerad 4,0K jul 19 06:03 .. -rw------- 1 freerad freerad 1,2K jul 19 07:54 35b6e644d6e9796809a07643ceee2542bcf311ef233ba29f8cec94d87d26e36f.asn1 -rw-r--r-- 1 freerad freerad 1,5K jul 19 07:54 35b6e644d6e9796809a07643ceee2542bcf311ef233ba29f8cec94d87d26e36f.vps -rw------- 1 freerad freerad 1,2K jul 19 07:54 95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8.asn1 -rw-r--r-- 1 freerad freerad 1,5K jul 19 07:54 95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8.vps Fisrts connection 8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Removing EAP session with state 0x08b1afdb0eb6a23f (8) eap: Previous EAP request found for state 0x08b1afdb0eb6a23f, released from the list (8) eap: Peer sent packet with method EAP TLS (13) (8) eap: Calling submodule eap_tls to process data (8) eap_tls: (TLS) EAP Got final fragment (110 bytes) total 2642 (8) eap_tls: (TLS) EAP Done initial handshake (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done (8) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate (8) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain (8) eap_tls: TLS-Cert-Serial := "7903974cb1367854b0fb2ee672ff78c68211ba5e" (8) eap_tls: TLS-Cert-Expiration := "250726070714Z" (8) eap_tls: TLS-Cert-Valid-Since := "250527070714Z" (8) eap_tls: TLS-Cert-Subject := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin(a)example.org/CN=free.loli.local" (8) eap_tls: TLS-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin(a)example.org/CN=free.loli.local" (8) eap_tls: TLS-Cert-Common-Name := "free.loli.local" (8) eap_tls: TLS-Cert-CRL-Distribution-Points += " http://www.example.org/example_ca.crl" (8) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain (8) eap_tls: TLS-Client-Cert-Serial := "02" (8) eap_tls: TLS-Client-Cert-Expiration := "250726070721Z" (8) eap_tls: TLS-Client-Cert-Valid-Since := "250527070721Z" (8) eap_tls: TLS-Client-Cert-Subject := "/C=FR/ST=Radius/O=Example Inc./CN=lolito/emailAddress=userdsdsd(a)example.org" (8) eap_tls: TLS-Client-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress= admin(a)example.org/CN=free.loli.local" (8) eap_tls: TLS-Client-Cert-Common-Name := "lolito" (8) eap_tls: TLS-Client-Cert-CRL-Distribution-Points += " http://www.example.com/example_ca.crl" (8) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (8) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "FD:D3:42:C8:4A:F1:0C:65:A5:A3:B6:8E:2A:73:B0:FA:B2:0D:CF:CD" (8) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "86:BC:40:4A:6E:B2:66:02:81:A5:75:19:DF:93:B8:AD:12:75:75:60" (8) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client certificate (8) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client key exchange (8) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read certificate verify (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read change cipher spec (8) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished (8) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change cipher spec (8) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished (8) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished (8) eap_tls: Serialising session 95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8, and storing in cache (8) eap_tls: WARNING: (TLS) TLS - Wrote session 95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8 to /var/log/freeradius/tlscache/95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8.asn1 (1175 bytes) (8) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished successfully (8) eap_tls: (TLS) TLS - Connection Established (8) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) eap_tls: TLS-Session-Version = "TLS 1.2" (8) eap: Sending EAP Request (code 1) ID 8 length 61 (8) eap: EAP session adding &reply:State = 0x08b1afdb0fb9a23f (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Framed-MTU = 994 (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange" (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify" (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Finished" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 ChangeCipherSpec" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Finished" (8) TLS-Cache-Filename = "/var/log/freeradius/tlscache/95c5a5a5c3d3a9d5dfc5055fb9e68097f5f53d64ce5b0fbd0c8a2ffaadba6fc8.asn1" (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 94 from 192.168.122.1:1812 to 192.168.122.64:53296 length 119 (8) EAP-Message = 0x0108003d0d8000000033140303000101160303002805edd07841a6a266432a9833cf13cb26374e5900c2967dbef35d48b18a7f8be25844724e2f9a0645 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x08b1afdb0fb9a23fa8fead84ac6fdcc0 (8) Finished request Second (17) # Executing group from file /etc/freeradius/sites-enabled/default (17) authenticate { (17) eap: Removing EAP session with state 0x4a09d2574c0edf49 (17) eap: Previous EAP request found for state 0x4a09d2574c0edf49, released from the list (17) eap: Peer sent packet with method EAP TLS (13) (17) eap: Calling submodule eap_tls to process data (17) eap_tls: (TLS) EAP Got final fragment (110 bytes) total 2642 (17) eap_tls: (TLS) EAP Done initial handshake (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done (17) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate (17) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain (17) eap_tls: TLS-Cert-Serial := "7903974cb1367854b0fb2ee672ff78c68211ba5e" (17) eap_tls: TLS-Cert-Expiration := "250726070714Z" (17) eap_tls: TLS-Cert-Valid-Since := "250527070714Z" (17) eap_tls: TLS-Cert-Subject := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin(a)example.org/CN=free.loli.local" (17) eap_tls: TLS-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin(a)example.org/CN=free.loli.local" (17) eap_tls: TLS-Cert-Common-Name := "free.loli.local" (17) eap_tls: TLS-Cert-CRL-Distribution-Points += " http://www.example.org/example_ca.crl" (17) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain (17) eap_tls: TLS-Client-Cert-Serial := "02" (17) eap_tls: TLS-Client-Cert-Expiration := "250726070721Z" (17) eap_tls: TLS-Client-Cert-Valid-Since := "250527070721Z" (17) eap_tls: TLS-Client-Cert-Subject := "/C=FR/ST=Radius/O=Example Inc./CN=lolito/emailAddress=userdsdsd(a)example.org" (17) eap_tls: TLS-Client-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress= admin(a)example.org/CN=free.loli.local" (17) eap_tls: TLS-Client-Cert-Common-Name := "lolito" (17) eap_tls: TLS-Client-Cert-CRL-Distribution-Points += " http://www.example.com/example_ca.crl" (17) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (17) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "FD:D3:42:C8:4A:F1:0C:65:A5:A3:B6:8E:2A:73:B0:FA:B2:0D:CF:CD" (17) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "86:BC:40:4A:6E:B2:66:02:81:A5:75:19:DF:93:B8:AD:12:75:75:60" (17) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client certificate (17) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client key exchange (17) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read certificate verify (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read change cipher spec (17) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished (17) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change cipher spec (17) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished (17) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished (17) eap_tls: Serialising session 35b6e644d6e9796809a07643ceee2542bcf311ef233ba29f8cec94d87d26e36f, and storing in cache (17) eap_tls: WARNING: (TLS) TLS - Wrote session 35b6e644d6e9796809a07643ceee2542bcf311ef233ba29f8cec94d87d26e36f to /var/log/freeradius/tlscache/35b6e644d6e9796809a07643ceee2542bcf311ef233ba29f8cec94d87d26e36f.asn1 (1175 bytes) (17) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished successfully (17) eap_tls: (TLS) TLS - Connection Established (17) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (17) eap_tls: TLS-Session-Version = "TLS 1.2" (17) eap: Sending EAP Request (code 1) ID 8 length 61 (17) eap: EAP session adding &reply:State = 0x4a09d2574d01df49

2 4

rlm_pap and support of SCRYPT hash ?
by Marc Fradin 18 Jul '25

18 Jul '25

Hello today we use FreeRADIUS Version 3.0.16 on "Ubuntu 18.04 LTS" recently, for security reasons, we change the hash of passwd in our ldap directory from {SSHA} to {CRYPT}*SCRYPT *but EAP/TTLS/PAP no longer works Indeed, man rlm_pap talks about crypt but not *scrypt* I installed a new test VM host with FreeRADIUS Version 3.2.5 on "Ubuntu 24.04.2 LTS" It works fine now but I don't know if it's due to the new version of freeradius or the updated crypt libraries for exemple ? Even in this version, man rlm_pap talks about crypt but not *scrypt* In /usr/share/doc/libcrypt-dev/README.md.gz for exemple I find effectively that SCRYPT is supported Can you help me answer this question? Thank you, Bregards Marc -- IMT Atlantique <https://www.imt-atlantique.fr> *Marc FRADIN* Ingénieur Système et Réseaux 02 99 12 70 24 - 06 30 51 38 40 2, rue de la Châtaigneraie CS 17608 35576 Cesson Sévigné Cedex Site web IMT Atlantique <https://www.imt-atlantique.fr>Twitter IMT Atlantique <https://twitter.com/IMTAtlantique>Facebook IMT Atlantique <https://www.facebook.com/IMTAtlantique>LinkedIn IMT Atlantique <https://www.linkedin.com/school/24772587/>Instagram IMT Atlantique <https://www.instagram.com/imt_atlantique/>Blog IMT Atlantique <http://www.imt-atlantique.fr/l-ecole/actualites> Une école de l'IMT <https://www.imt.fr>

2 1

Freeradius 3.2.8 on Debian 12 not responding to requests via Relay Agent
by David Lake 17 Jul '25

17 Jul '25

Hello I’m trying to configure FreeRadius to offer addresses to a remote subnet behind a DHCP Relay agent. My local IP range is 192.168.1.0/24 with the server at 192.168.1.1 My remote range is 192.168.2.0/24 with the Relay Agent at 192.168.2.1. I have two pools in dhcpippool using MySQL MariaDB [radius]> select * from dhcpippool; +----+-----------+-----------------+------------------+-------------+---------------------+---------+---------+ | id | pool_name | framedipaddress | pool_key | gateway | expiry_time | status | counter | +----+-----------+-----------------+------------------+-------------+---------------------+---------+---------+ | 9 | local | 192.99.0.102 | 0x01d076580cbb80 | 0.0.0.0 | 2025-07-16 23:47:58 | dynamic | 0 | | 10 | local | 192.99.0.101 | | 192.99.0.1 | 2025-07-16 17:58:09 | dynamic | 0 | | 11 | local | 192.99.0.100 | | 192.99.0.1 | 2025-07-16 21:51:58 | dynamic | 0 | | 12 | ipoe | 192.168.2.100 | | 192.168.2.1 | 2025-07-17 14:00:33 | dynamic | 0 | | 13 | ipoe | 192.168.2.101 | | 192.168.2.1 | 2025-07-17 14:00:39 | dynamic | 0 | | 14 | ipoe | 192.168.2.102 | | 192.168.2.1 | 2025-07-17 14:00:44 | dynamic | 0 | +----+-----------+-----------------+------------------+-------------+---------------------+---------+---------+ 6 rows in set (0.003 sec) MariaDB [radius]> I can server hosts locally on 192.168.1.0 and everything works fine. However, I’m seeing zero traffic incoming to radius -X even though tcpdump shows that traffic is being received on the eth0 interface (192.168.1.1). Pcap attached taken on the DHCP server machine. Is there a config step I am missing? ss -lunp shows that radiusd is listening on port 67. My files/dhcp is configured as follows: # network Pool-Name := "local" DHCP-Domain-Name := "local.org", DHCP-Subnet-Mask := 255.255.255.0, DHCP-Router-Address := 192.168.1.1, DHCP-Domain-Name-Server := 8.8.8.8, Fall-Through := yes network DHCP-Network-Subnet < 192.168.2.0/24, Pool-Name := "ipoe" DHCP-Domain-Name := "remote.org", DHCP-Subnet-Mask := 255.255.255.0, DHCP-Router-Address := 192.168.2.1, DHCP-Domain-Name-Server := 8.8.8.8, Fall-Through := yes DHCP in mods-enabled is: listen { # This is a dhcp socket. type = dhcp # IP address to listen on. Will usually be the IP of the # interface, or 0.0.0.0 ipaddr = 192.168.1.1 # source IP address for unicast packets sent by the # DHCP server. # # The source IP for unicast packets is chosen from the first # one of the following items which returns a valid IP # address: # # reply:Packet-Src-IP-Address # If the request is unicast, the address it was received on # src_ipaddr # ipaddr # reply:DHCP-DHCP-Server-Identifier # src_ipaddr = 192.168.1.1 # The port should be 67 for a production network. Don't set # it to 67 on a production network unless you really know # what you're doing. Even if nothing is configured below, the # server may still NAK legitimate responses from clients. port = 67 # Interface name we are listening on. See comments above. interface = eth0 # The DHCP server defaults to allowing broadcast packets. # Set this to "no" only when the server receives *all* packets # from a relay agent. i.e. when *no* clients are on the same # LAN as the DHCP server. # # It's set to "no" here for testing. It will usually want to # be "yes" in production, unless you are only dealing with # relayed packets. broadcast = no # On Linux if you're running the server as non-root, you # will need to do: # # setcap cap_net_admin,cap_net_bind_service=eip /path/to/radiusd # # This will allow the server to set ARP table entries # for newly allocated IPs, when run as the "radius" user. # # The above "setcap" command adds the capability to the program, # usually so long as it is run by the "radius" user. Which means # (oddly enough) that it no longer works when run as root! # # When running the server as root in debug mode, you can use: # # capsh --caps="cap_setpcap,cap_setuid,cap_setgid,cap_net_admin,cap_net_bind_service+eip" --keep=1 --user=radius --addamb=cap_net_admin,cap_net_bind_service -- -c "/path/to/radiusd -X" # # Or, simply "sudo" or "su" to the "radius" user, and then run # the server in debug mode. # De-duplicate DHCP packets. If clients don't receive # a reply within their timeout, most will re-transmit. # A reply to either packet will satisfy, so de-duplicating # helps manage load on a busy server performance { skip_duplicate_checks = no } } # Packets received on the socket will be processed through one # of the following sections, named after the DHCP packet type. # See dictionary.dhcp for the packet types. # Return packets will be sent to, in preference order: # DHCP-Gateway-IP-Address # DHCP-Client-IP-Address # DHCP-Your-IP-Address # At least one of these attributes should be set at the end of each # section for a response to be sent. # An internal attribute of DHCP-Network-Subnet is set to provide # a basis for determining the network that a client belongs to. This # is a hierarchical assignment based on: # # - DHCP-Relay-Link-Selection # - DHCP-Subnet-Selection-Option # - DHCP-Gateway-IP-Address # - DHCP-Client-IP-Address # # Except for cases where all IP allocation is performed using a mapping from # the device MAC address to a fixed IP address the DHCP configuration will # involve the use of one or more pools. # # Each pool should be composed of a set of equally valid IP addresses for the # devices designated as users of the pool. During IP allocation the choice of # pool is driven by setting the Pool-Name attribute which may either be # specified directly or chosen (usually with the help of the dhcp_network # module) based on the initial value of DHCP-Network-Subnet. # # DHCP-Network-Subnet indicates the network from which the request is # originating. In cases where the originating network alone is insufficent to # define the required IP allocated policy, DHCP-Network-Subnet may be # overridden to force the selection of a particular pool. # # IP addresses belonging to a single pool that is designated for a Layer 2 # network containing multiple subnets (a "shared-network" or "multinet" # configuration as defined by some other DHCP servers), will by definition be # members of distinct subnets that require their own DHCP reply parameters. In # this case the dhcp_subnet policy can be used to set the correct # DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address options # based on the allocated IP. dhcp DHCP-Discover { # The DHCP Server Identifier is set here since is returned in OFFERs update control { &DHCP-DHCP-Server-Identifier = 192.168.1.1 } # Call a policy (defined in policy.d/dhcp) to set common reply attributes # dhcp_common # Use a "passwd" module to set group memberships in DHCP-Group-Name # Enable mods-available/dhcp_passwd to use this #dhcp_group_membership # If clients need to be assigned to a particular network based on # an attribute in the packet rather than the calculated # DHCP-Network-Subnet described above, then call a policy # (defined in policy.d/dhcp) to perform the override #dhcp_override_network # Use a "files" module to lookup global and subnet options # For multiple subnets use this in place of dhcp_common # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp dhcp_network # Do a simple mapping of MAC to assigned IP. # # See below for the definition of the "mac2ip" # module. # #mac2ip # Or, allocate IPs from the DHCP pool in SQL. You may need to # set the pool name here if you haven't set it elsewhere. # update control { # &Pool-Name := "local" #} dhcp_sqlippool # If the IP address was not allocated, do something else. # You could call a Perl, Python, or Java script here. #if (notfound) { # ... #} # "Shared-networks" may have multiple IP subnets co-existing in a # single Layer 2 network. If the pool for the network contains # addresses from more that one subnet then the setting subnet-specific # DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address # parameters must be performed after the allocation of the IP address. # # Set any subnet-specific parameters using this policy. # # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in # policy.d/dhcp to use this. # #dhcp_subnet # Use a "files" module to lookup options based on DHCP-Group-Name # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_group_options # Use a "files" module to lookup host specific options # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_hosts # As an alternative or complement to configuration files based lookup # for options data you can instead use an SQL database. Example # configuration is found in dhcp_policy_sql in policy.d/dhcp which # will need to be adapted to your requirements. #dhcp_policy_sql # Set the type of packet to send in reply. # # The server will look at the DHCP-Message-Type attribute to # determine which type of packet to send in reply. Common # values would be DHCP-Offer, DHCP-Ack or DHCP-NAK. See # dictionary.dhcp for all the possible values. # # DHCP-Do-Not-Respond can be used to tell the server to not # respond. # # In the event that DHCP-Message-Type is not set then the # server will fall back to determining the type of reply # based on the rcode of this section. # #update reply { # DHCP-Message-Type = DHCP-Offer #} # # If DHCP-Message-Type is not set, returning "ok" or # "updated" from this section will respond with a DHCP-Offer # message. # # Other rcodes will tell the server to not return any response. # #ok } dhcp DHCP-Request { # You must set the DHCP Server Identifier here since this is returned # in ACKs and is used to determine whether a request containing a # "server-ip" field is intended for this server update control { &DHCP-DHCP-Server-Identifier = 192.0.2.2 } # If the request is not for this server then silently discard it if (&request:DHCP-DHCP-Server-Identifier && \ &request:DHCP-DHCP-Server-Identifier != &control:DHCP-DHCP-Server-Identifier) { do_not_respond } # Response packet type. See DHCP-Discover section above. #update reply { # &DHCP-Message-Type = DHCP-Ack #} # Call a policy (defined in policy.d/dhcp) to set common reply attributes # dhcp_common # Use a "passwd" module to set group memberships in DHCP-Group-Name # Enable mods-available/dhcp_passwd to use this #dhcp_group_membership # Optionally override the network address based on client attributes # See Discover section #dhcp_override_network # Use a "files" module to lookup global and subnet options # For multiple subnets use this in place of dhcp_common # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in # policy.d/dhcp to use this # Options are set in mods-config/files/dhcp dhcp_network # Do a simple mapping of MAC to assigned IP. # # See below for the definition of the "mac2ip" # module. # #mac2ip # Or, allocate IPs from the DHCP pool in SQL. You may need to # set the pool name here if you haven't set it elsewhere. # update control { # &Pool-Name := "local" # } dhcp_sqlippool_request # If the IP was not allocated, do something else. # You could call a Perl, Python, or Java script here. #if (notfound) { # ... #} # "Shared-networks" may have multiple IP subnets co-existing in a # single Layer 2 network. If the pool for the network contains # addresses from more that one subnet then the setting subnet-specific # DHCP-Subnet-Mask, DHCP-Router-Address and DHCP-Broadcast-Address # parameters must be performed after the allocation of the IP address. # # Set any subnet-specific parameters using this policy. # #dhcp_subnet # Use a "files" module to lookup options based on DHCP-Group-Name # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_group_options # Use a "files" module to lookup host specific options # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_hosts # As an alternative or complement to configuration files based lookup # for options data you can instead use an SQL database. Example # configuration is found in dhcp_policy_sql in policy.d/dhcp which # will need to be adapted to your requirements. #dhcp_policy_sql # If DHCP-Message-Type is not set, returning "ok" or # "updated" from this section will respond with a DHCP-Ack # packet. # # "handled" will not return a packet, all other rcodes will # send back a DHCP-NAK. # #ok } # # Other DHCP packet types # # There should be a separate section for each DHCP message type. # By default this configuration will ignore them all. Any packet type # not defined here will be responded to with a DHCP-NAK. dhcp DHCP-Decline { # Use a "passwd" module to set group memberships in DHCP-Group-Name # Enable mods-available/dhcp_passwd to use this #dhcp_group_membership # Optionally override the network address based on client attributes # See Discover section #dhcp_override_network # Use a "files" module to lookup global and subnet options # For multiple networks use this in place of dhcp_common # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp dhcp_network # Use a policy that set options from data stored in an SQL database #dhcp_policy_sql # If using IPs from a DHCP pool in SQL then you may need to set the # pool name here if you haven't set it elsewhere and release the IP. # update control { # &Pool-Name := "local" # } # dhcp_sqlippool_decline update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } # # A dummy config for Inform packets - this should match the # options set in the Request section above, except Inform replies # must not set Your-IP-Address or IP-Address-Lease-Time # dhcp DHCP-Inform { # Call a policy (defined in policy.d/dhcp) to set common reply attributes # dhcp_common # Use a "passwd" module to set group memberships in DHCP-Group-Name # Enable mods-available/dhcp_passwd to use this #dhcp_group_membership # Optionally override the network address based on client attributes # See Discover section #dhcp_override_network # Use a "files" module to lookup global and network options # For multiple networks use this in place of dhcp_common # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp dhcp_network # Use a policy with calls a "files" module of the same name to lookup # subnet options # Enable mods-available/dhcp_files AND uncomment dhcp_subnet in # policy.d/dhcp to use this # Options are set in mods-config/files/dhcp #dhcp_subnet # Use a "files" module to lookup options based on DHCP-Group-Name # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_group_options # Use a "files" module to lookup host specific options # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp #dhcp_hosts # Use a policy that set options from data stored in an SQL database #dhcp_policy_sql ok } # # For Windows 7 boxes # #dhcp DHCP-Inform { # update reply { # Packet-Dst-Port = 67 # DHCP-Message-Type = DHCP-ACK # DHCP-DHCP-Server-Identifier = "%{Packet-Dst-IP-Address}" # DHCP-Site-specific-28 = 0x0a00 # } # ok #} dhcp DHCP-Release { # Use a "passwd" module to set group memberships in DHCP-Group-Name # Enable mods-available/dhcp_passwd to use this #dhcp_group_membership # Optionally override the network address based on client attributes # See Discover section #dhcp_override_network # Use a "files" module to lookup global and subnet options # For multiple subnets use this in place of dhcp_common # Enable mods-available/dhcp_files to use this # Options are set in mods-config/files/dhcp dhcp_network # If using IPs from a DHCP pool in SQL then you may need to set the # pool name here if you haven't set it elsewhere and release the IP. # update control { # &Pool-Name := "local" # } # dhcp_sqlippool_release update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } dhcp DHCP-Lease-Query { # The thing being queried for is implicit # in the packets. # has MAC, asking for IP, etc. if (&DHCP-Client-Hardware-Address) { # look up MAC in database } # has IP, asking for MAC, etc. elsif (&DHCP-Your-IP-Address) { # look up IP in database } # has host name, asking for IP, MAC, etc. elsif (&DHCP-Client-Identifier) { # look up identifier in database } else { update reply { &DHCP-Message-Type = DHCP-Lease-Unknown } ok # stop processing return } # # We presume that the database lookup returns "notfound" # if it can't find anything. # if (notfound) { update reply { &DHCP-Message-Type = DHCP-Lease-Unknown } ok return } # # Add more logic here. Is the lease inactive? # If so, respond with DHCP-Lease-Unassigned. # # Otherwise, respond with DHCP-Lease-Active # # # Also be sure to return ALL information about # the lease. # # # The reply types are: # # DHCP-Lease-Unknown # DHCP-Lease-Active # DHCP-Lease-Unassigned # update reply { &DHCP-Message-Type = DHCP-Lease-Unassigned } } } ###################################################################### # # This next section is a sample configuration for the "passwd" # module, that reads flat-text files. It should go into # radiusd.conf, in the "modules" section. # # The file is in the format <mac>,<ip> # # 00:01:02:03:04:05,192.0.2.100 # 01:01:02:03:04:05,192.0.2.101 # 02:01:02:03:04:05,192.0.2.102 # # This lets you perform simple static IP assignment. # # There is a preconfigured "mac2ip" module setup in # mods-available/mac2ip. To use it do: # # # cd raddb/ # # ln -s ../mods-available/mac2ip mods-enabled/mac2ip # # mkdir mods-config/passwd # # Then create the file mods-config/passwd/mac2ip with the above # format. # ###################################################################### # This is an example only - see mods-available/mac2ip instead; do # not uncomment these lines here. # #passwd mac2ip { # filename = ${confdir}/mac2ip # format = "*DHCP-Client-Hardware-Address:=DHCP-Your-IP-Address" # delimiter = "," #} Thanks David David Lake Visiting Professor 5G Innovation Centre (5GIC and 6GIC) Tel: +44 (0)7711 736784 Email: d.lake(a)surrey.ac.uk<mailto:%20d.lake@surrey.ac.uk> Web: surrey.ac.uk<http://www.surrey.ac.uk/?utm_medium=internal&utm_source=emailsignature&utm_…> [A blue text on a black background Description automatically generated]<http://www.surrey.ac.uk/?utm_source=emailsignature&utm_medium=internal&utm_…> James Clerk Maxwell Building, University of Surrey, Guildford, Surrey, GU2 7XH, UK

2 3

Request: How to implement SSID and group aware logic
by Taylor Gorman 16 Jul '25

16 Jul '25

Hello again. I would like to request assistance with how to implement LDAP group aware and SSID aware logic. My questions: 1. What file should I implement this in? I'm thinking "sites-available/google-ldap-auth" is the correct answer, but I'm not sure. 2. Should I attempt this in the authorize section, authenticate section, or post-auth section? I think it should go in the authorize section, but I'm not sure. 3. Is this a use case for realms? I don't really understand realms at all. After I know where to put it, I think I can figure it out how to code it using the unlang manuals. What I want to happen: 1. Supplicant attempts to connect with domain @thecampusway.com or @students.thecampusway.com 2. freeRADIUS checks what SSID the user is coming from 3. If supplicant connecting to SSID CampusInternal and has LDAP group "allstaff", then allow the connection. Else, reject the connection. 4. If supplicant is connecting to SSID CampusStudents and has LDAP group "wifistudents", then allow the connection. Else, reject. My implementation: Supplicant device: 2017 inch MacBook Air running macOS Monterey 12.7.6 Network equipment: UAP-AC-PRO wireless access point and UDM-SE router Directory server: Google Workspace LDAPS My Implementation: Using official docker image "freeradius/freeradius-server" running on Google Compute Engine COS. A debug, in case it's helpful: taylorgorman_thecampusway_com@devbox2 ~ $ sudo docker run -it --rm --name freeradius_dev -p 1812:1812/udp -p 1813:1813/udp -v /var/lib/custom_freeradius_configs:/etc/freeradius -v /var/log/freeradius:/var/log/freeradius freeradius/freeradius-server /bin/bash -c "chown -R freerad:freerad /etc/freeradius/certs /var/log/freeradius; exec /bin/bash" root@97e8d5543f57:/# freeradius -X FreeRADIUS Version 3.2.7 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/cache_auth including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/ldap_google including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/sradutmp including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/google-ldap-auth including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/check-eap-tls including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" } unlang { group_stop_return = no policy_stop_return = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client radiusserver_radtest_interlink { ipaddr = 172.18.0.0/16 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client radiusserver_radtest_interlink is short, and likely can be broken by an attacker. client 300Tivoli { ipaddr = wan1.normandy.taylorgorman.net IPv4 address [71.59.46.3] secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. Debug state unknown (cap_sys_ptrace capability not set) Configuration version: c5f2-1bdc-ae2d-84c5 systemd watchdog is disabled # Creating Auth-Type = LDAP # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp totp { time_step = 30 otp_length = 6 lookback_steps = 1 lookback_interval = 30 lookforward_steps = 0 } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_proxy_rate_limit # Loading module "proxy_rate_limit" from file /etc/freeradius/mods-enabled/proxy_rate_limit proxy_rate_limit { max_entries = 2048 idle_timeout = 10 num_subtables = 256 window = 1 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_cache # Loading module "cache_auth_accept" from file /etc/freeradius/mods-enabled/cache_auth cache cache_auth_accept { driver = "rlm_cache_rbtree" key = "%{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}}" ttl = 7200 max_entries = 0 epoch = 0 add_stats = no } # Loading module "cache_auth_reject" from file /etc/freeradius/mods-enabled/cache_auth cache cache_auth_reject { driver = "rlm_cache_rbtree" key = "%{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}}" ttl = 3600 max_entries = 0 epoch = 0 add_stats = no } # Loading module "cache_ldap_user_dn" from file /etc/freeradius/mods-enabled/cache_auth cache cache_ldap_user_dn { driver = "rlm_cache_rbtree" key = "%{Stripped-User-Name}" ttl = 86400 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_ldap # Loading module "ldap_google" from file /etc/freeradius/mods-enabled/ldap_google ldap ldap_google { server = "ldaps://ldap.google.com:636/" identity = "MortifiedU" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = yes cacheable_dn = yes cache_attribute = "LDAP-Cached-Membership" allow_dangling_group_ref = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 chase_referrals = no net_timeout = 3 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/google/certificate.crt" private_key_file = "/etc/freeradius/certs/google/key.key" random_file = "/dev/urandom" tls_min_version = "1.2" check_crl = no start_tls = no require_cert = "allow" } } Creating attribute ldap_google-LDAP-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp # Instantiating module "proxy_rate_limit" from file /etc/freeradius/mods-enabled/proxy_rate_limit # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "cache_auth_accept" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_auth_accept): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "cache_auth_reject" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_auth_reject): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "cache_ldap_user_dn" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_ldap_user_dn): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" virtual_server = "check-eap-tls" configurable_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.3" tls_min_version = "1.2" cache { enable = yes lifetime = 8 name = "base-eap-cache" max_entries = 255 persist_dir = "/var/log/freeradius/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "google-ldap-auth" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ldap_google" from file /etc/freeradius/mods-enabled/ldap_google rlm_ldap: libldap vendor: OpenLDAP, version: 20518 rlm_ldap (ldap_google): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (ldap_google): Couldn't find configuration for post-auth, will return NOOP for calls from this section !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL !! There may be random issues with TLS connections due to this conflict. !! The server may also crash. !! See https://wiki.freeradius.org/modules/Rlm_ldap for more information. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! rlm_ldap (ldap_google): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 max_retries = 5 spread = no } rlm_ldap (ldap_google): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful rlm_ldap (ldap_google): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful rlm_ldap (ldap_google): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful rlm_ldap (ldap_google): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful rlm_ldap (ldap_google): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server google-ldap-auth { # from file /etc/freeradius/sites-enabled/google-ldap-auth # Loading authenticate {...} Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server google-ldap-auth server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server check-eap-tls { # from file /etc/freeradius/sites-enabled/check-eap-tls # Loading authorize {...} } # server check-eap-tls server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18123 } listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 900 } } listen { type = "acct" ipaddr = * port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address 127.0.0.1 port 18123 bound to server google-ldap-auth Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 34018 Listening on proxy address :: port 54059 Ready to process requests (0) Received Access-Request Id 80 from 71.59.46.3:57724 to 172.17.0.2:1812 length 279 (0) User-Name = "radiustest(a)thecampusway.com" (0) NAS-IP-Address = 10.0.10.43 (0) NAS-Identifier = "default" (0) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "30-35-AD-A5-B9-A6" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "D90D33A49AB1E90F" (0) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027077 (0) WLAN-Group-Mgmt-Cipher = 1027078 (0) Filter-Id = "wpa-eap" (0) Framed-MTU = 1002 (0) EAP-Message = 0x028a002001726164697573746573744074686563616d7075737761792e636f6d (0) Message-Authenticator = 0xb786f581e5d73d7b1427dd67fccdeb99 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (0) auth_log: EXPAND %t (0) auth_log: --> Tue Jul 15 17:46:10 2025 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) policy rewrite_called_station_id { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> 78-8A-20-58-6E-4E (0) &Called-Station-Id := 78-8A-20-58-6E-4E (0) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (0) --> 0x788A20586E4E (0) &Called-Station-MAC := 0x788a20586e4e (0) } # update request = noop (0) if ("%{8}") { (0) EXPAND %{8} (0) --> CampusInternal (0) if ("%{8}") -> TRUE (0) if ("%{8}") { (0) update request { (0) EXPAND %{8} (0) --> CampusInternal (0) &Called-Station-SSID := CampusInternal (0) } # update request = noop (0) } # if ("%{8}") = noop (0) [updated] = updated (0) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_called_station_id = updated (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (0) suffix: No such realm "thecampusway.com" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 138 length 32 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Using default_eap_type = TTLS (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) TTLS -Initiating new session (0) eap: Sending EAP Request (code 1) ID 139 length 6 (0) eap: EAP session adding &reply:State = 0x8a91dc8e8a1ac932 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 80 from 172.17.0.2:1812 to 71.59.46.3:57724 length 64 (0) EAP-Message = 0x018b00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x8a91dc8e8a1ac932db26def1df7f8c68 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 81 from 71.59.46.3:57724 to 172.17.0.2:1812 length 426 (1) User-Name = "radiustest(a)thecampusway.com" (1) NAS-IP-Address = 10.0.10.43 (1) NAS-Identifier = "default" (1) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "30-35-AD-A5-B9-A6" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "D90D33A49AB1E90F" (1) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027077 (1) WLAN-Group-Mgmt-Cipher = 1027078 (1) Filter-Id = "wpa-eap" (1) Framed-MTU = 1002 (1) EAP-Message = 0x028b00a115800000009716030300920100008e0303687693e28c24604af9f9a63ab89c057f0b63551d2c64fc6c2817a09c4cff821100002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (1) State = 0x8a91dc8e8a1ac932db26def1df7f8c68 (1) Message-Authenticator = 0xd7debb1415c2f338a137a202df42bfcd (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (1) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (1) auth_log: EXPAND %t (1) auth_log: --> Tue Jul 15 17:46:10 2025 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) policy rewrite_called_station_id { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> 78-8A-20-58-6E-4E (1) &Called-Station-Id := 78-8A-20-58-6E-4E (1) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (1) --> 0x788A20586E4E (1) &Called-Station-MAC := 0x788a20586e4e (1) } # update request = noop (1) if ("%{8}") { (1) EXPAND %{8} (1) --> CampusInternal (1) if ("%{8}") -> TRUE (1) if ("%{8}") { (1) update request { (1) EXPAND %{8} (1) --> CampusInternal (1) &Called-Station-SSID := CampusInternal (1) } # update request = noop (1) } # if ("%{8}") = noop (1) [updated] = updated (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_called_station_id = updated (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (1) suffix: No such realm "thecampusway.com" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 139 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Removing EAP session with state 0x8a91dc8e8a1ac932 (1) eap: Previous EAP request found for state 0x8a91dc8e8a1ac932, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes (1) eap_ttls: (TLS) EAP Got all data (151 bytes) (1) eap_ttls: (TLS) TTLS - Handshake state - before SSL initialization (1) eap_ttls: (TLS) TTLS - Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) TTLS - Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) TTLS - recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) TTLS - Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) TTLS - In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 140 length 1000 (1) eap: EAP session adding &reply:State = 0x8a91dc8e8b1dc932 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 81 from 172.17.0.2:1812 to 71.59.46.3:57724 length 1064 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x8a91dc8e8b1dc932db26def1df7f8c68 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 82 from 71.59.46.3:57724 to 172.17.0.2:1812 length 271 (2) User-Name = "radiustest(a)thecampusway.com" (2) NAS-IP-Address = 10.0.10.43 (2) NAS-Identifier = "default" (2) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "30-35-AD-A5-B9-A6" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "D90D33A49AB1E90F" (2) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027077 (2) WLAN-Group-Mgmt-Cipher = 1027078 (2) Filter-Id = "wpa-eap" (2) Framed-MTU = 1002 (2) EAP-Message = 0x028c00061500 (2) State = 0x8a91dc8e8b1dc932db26def1df7f8c68 (2) Message-Authenticator = 0xb1058055f69937ebd6b532c50329b0c0 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (2) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (2) auth_log: EXPAND %t (2) auth_log: --> Tue Jul 15 17:46:10 2025 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) policy rewrite_called_station_id { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> 78-8A-20-58-6E-4E (2) &Called-Station-Id := 78-8A-20-58-6E-4E (2) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (2) --> 0x788A20586E4E (2) &Called-Station-MAC := 0x788a20586e4e (2) } # update request = noop (2) if ("%{8}") { (2) EXPAND %{8} (2) --> CampusInternal (2) if ("%{8}") -> TRUE (2) if ("%{8}") { (2) update request { (2) EXPAND %{8} (2) --> CampusInternal (2) &Called-Station-SSID := CampusInternal (2) } # update request = noop (2) } # if ("%{8}") = noop (2) [updated] = updated (2) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_called_station_id = updated (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (2) suffix: No such realm "thecampusway.com" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 140 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Removing EAP session with state 0x8a91dc8e8b1dc932 (2) eap: Previous EAP request found for state 0x8a91dc8e8b1dc932, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 141 length 1000 (2) eap: EAP session adding &reply:State = 0x8a91dc8e881cc932 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 82 from 172.17.0.2:1812 to 71.59.46.3:57724 length 1064 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x8a91dc8e881cc932db26def1df7f8c68 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 83 from 71.59.46.3:57724 to 172.17.0.2:1812 length 271 (3) User-Name = "radiustest(a)thecampusway.com" (3) NAS-IP-Address = 10.0.10.43 (3) NAS-Identifier = "default" (3) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "30-35-AD-A5-B9-A6" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "D90D33A49AB1E90F" (3) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027077 (3) WLAN-Group-Mgmt-Cipher = 1027078 (3) Filter-Id = "wpa-eap" (3) Framed-MTU = 1002 (3) EAP-Message = 0x028d00061500 (3) State = 0x8a91dc8e881cc932db26def1df7f8c68 (3) Message-Authenticator = 0xf2806200d08d942ce16c00a8e8f84fb4 (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (3) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (3) auth_log: EXPAND %t (3) auth_log: --> Tue Jul 15 17:46:10 2025 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) policy rewrite_called_station_id { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> 78-8A-20-58-6E-4E (3) &Called-Station-Id := 78-8A-20-58-6E-4E (3) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (3) --> 0x788A20586E4E (3) &Called-Station-MAC := 0x788a20586e4e (3) } # update request = noop (3) if ("%{8}") { (3) EXPAND %{8} (3) --> CampusInternal (3) if ("%{8}") -> TRUE (3) if ("%{8}") { (3) update request { (3) EXPAND %{8} (3) --> CampusInternal (3) &Called-Station-SSID := CampusInternal (3) } # update request = noop (3) } # if ("%{8}") = noop (3) [updated] = updated (3) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_called_station_id = updated (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (3) suffix: No such realm "thecampusway.com" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 141 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Removing EAP session with state 0x8a91dc8e881cc932 (3) eap: Previous EAP request found for state 0x8a91dc8e881cc932, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 142 length 1000 (3) eap: EAP session adding &reply:State = 0x8a91dc8e891fc932 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 83 from 172.17.0.2:1812 to 71.59.46.3:57724 length 1064 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x8a91dc8e891fc932db26def1df7f8c68 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 84 from 71.59.46.3:57724 to 172.17.0.2:1812 length 271 (4) User-Name = "radiustest(a)thecampusway.com" (4) NAS-IP-Address = 10.0.10.43 (4) NAS-Identifier = "default" (4) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "30-35-AD-A5-B9-A6" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "D90D33A49AB1E90F" (4) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027077 (4) WLAN-Group-Mgmt-Cipher = 1027078 (4) Filter-Id = "wpa-eap" (4) Framed-MTU = 1002 (4) EAP-Message = 0x028e00061500 (4) State = 0x8a91dc8e891fc932db26def1df7f8c68 (4) Message-Authenticator = 0xa53a7fe2074683705eb50b30f5d853e3 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (4) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (4) auth_log: EXPAND %t (4) auth_log: --> Tue Jul 15 17:46:10 2025 (4) [auth_log] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) policy rewrite_called_station_id { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> 78-8A-20-58-6E-4E (4) &Called-Station-Id := 78-8A-20-58-6E-4E (4) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (4) --> 0x788A20586E4E (4) &Called-Station-MAC := 0x788a20586e4e (4) } # update request = noop (4) if ("%{8}") { (4) EXPAND %{8} (4) --> CampusInternal (4) if ("%{8}") -> TRUE (4) if ("%{8}") { (4) update request { (4) EXPAND %{8} (4) --> CampusInternal (4) &Called-Station-SSID := CampusInternal (4) } # update request = noop (4) } # if ("%{8}") = noop (4) [updated] = updated (4) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_called_station_id = updated (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (4) suffix: No such realm "thecampusway.com" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 142 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Removing EAP session with state 0x8a91dc8e891fc932 (4) eap: Previous EAP request found for state 0x8a91dc8e891fc932, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 143 length 14 (4) eap: EAP session adding &reply:State = 0x8a91dc8e8e1ec932 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (4) Sent Access-Challenge Id 84 from 172.17.0.2:1812 to 71.59.46.3:57724 length 72 (4) EAP-Message = 0x018f000e158000000b9e0e000000 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x8a91dc8e8e1ec932db26def1df7f8c68 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 85 from 71.59.46.3:57724 to 172.17.0.2:1812 length 401 (5) User-Name = "radiustest(a)thecampusway.com" (5) NAS-IP-Address = 10.0.10.43 (5) NAS-Identifier = "default" (5) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "30-35-AD-A5-B9-A6" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "D90D33A49AB1E90F" (5) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027077 (5) WLAN-Group-Mgmt-Cipher = 1027078 (5) Filter-Id = "wpa-eap" (5) Framed-MTU = 1002 (5) EAP-Message = 0x028f008815800000007e1603030046100000424104f9db086d4002cd3319c22f765afe77d4e172e6da7034d2e2973d034bd67bcde5848897505969008f91691f3ba26b61bc6410bed817a24788b0efe2516e46d19c14030300010116030300287d6392b78a35fb5ec576e514fa3213b5d112db3b63c1c42cc4bf21294140202f46a5a148feb20660 (5) State = 0x8a91dc8e8e1ec932db26def1df7f8c68 (5) Message-Authenticator = 0x1b0fb1a917f293b3ad37e03488201524 (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (5) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (5) auth_log: EXPAND %t (5) auth_log: --> Tue Jul 15 17:46:10 2025 (5) [auth_log] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) policy rewrite_called_station_id { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> 78-8A-20-58-6E-4E (5) &Called-Station-Id := 78-8A-20-58-6E-4E (5) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (5) --> 0x788A20586E4E (5) &Called-Station-MAC := 0x788a20586e4e (5) } # update request = noop (5) if ("%{8}") { (5) EXPAND %{8} (5) --> CampusInternal (5) if ("%{8}") -> TRUE (5) if ("%{8}") { (5) update request { (5) EXPAND %{8} (5) --> CampusInternal (5) &Called-Station-SSID := CampusInternal (5) } # update request = noop (5) } # if ("%{8}") = noop (5) [updated] = updated (5) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_called_station_id = updated (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (5) suffix: No such realm "thecampusway.com" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 143 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Removing EAP session with state 0x8a91dc8e8e1ec932 (5) eap: Previous EAP request found for state 0x8a91dc8e8e1ec932, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes (5) eap_ttls: (TLS) EAP Got all data (126 bytes) (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write server done (5) eap_ttls: (TLS) TTLS - recv TLS 1.2 Handshake, ClientKeyExchange (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS read client key exchange (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS read change cipher spec (5) eap_ttls: (TLS) TTLS - recv TLS 1.2 Handshake, Finished (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS read finished (5) eap_ttls: (TLS) TTLS - send TLS 1.2 ChangeCipherSpec (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write change cipher spec (5) eap_ttls: (TLS) TTLS - send TLS 1.2 Handshake, Finished (5) eap_ttls: (TLS) TTLS - Handshake state - Server SSLv3/TLS write finished (5) eap_ttls: Serialising session c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2, and storing in cache (5) eap_ttls: WARNING: (TLS) TTLS - Wrote session c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2 to /var/log/freeradius/tlscache/c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2.asn1 (147 bytes) (5) eap_ttls: (TLS) TTLS - Handshake state - SSL negotiation finished successfully (5) eap_ttls: (TLS) TTLS - Connection Established (5) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_ttls: TLS-Session-Version = "TLS 1.2" (5) eap: Sending EAP Request (code 1) ID 144 length 61 (5) eap: EAP session adding &reply:State = 0x8a91dc8e8f01c932 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) TTLS - recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Finished" (5) TLS-Cache-Filename = "/var/log/freeradius/tlscache/c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2.asn1" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 85 from 172.17.0.2:1812 to 71.59.46.3:57724 length 119 (5) EAP-Message = 0x0190003d1580000000331403030001011603030028bc3152e2db9f75e7546f2c31c30c8dbde82649b1c953b056493d4e8c85f463d4ccfedefda1595657 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x8a91dc8e8f01c932db26def1df7f8c68 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 86 from 71.59.46.3:57724 to 172.17.0.2:1812 length 364 (6) User-Name = "radiustest(a)thecampusway.com" (6) NAS-IP-Address = 10.0.10.43 (6) NAS-Identifier = "default" (6) Called-Station-Id = "78-8A-20-58-6E-4E:CampusInternal" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "30-35-AD-A5-B9-A6" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "D90D33A49AB1E90F" (6) Acct-Multi-Session-Id = "1E33DF1D4FE38260" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027077 (6) WLAN-Group-Mgmt-Cipher = 1027078 (6) Filter-Id = "wpa-eap" (6) Framed-MTU = 1002 (6) EAP-Message = 0x0290006315800000005917030300547d6392b78a35fb5fa14989c5dc2e1d9df82aad8332e781a56338f767524ce1e173d4927b08d24d9c3b500cdb5de1f8aac0af5b76b53187ca90e29853fbc237a9c4b08e681bc0227547337fd52a0c5310ab86d487 (6) State = 0x8a91dc8e8f01c932db26def1df7f8c68 (6) Message-Authenticator = 0xb8f4c77bb3ff10c2fb4223becb9cbcef (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) TTLS - send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Cache-Filename = "/var/log/freeradius/tlscache/c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2.asn1" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (6) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/71.59.46.3/auth-detail-20250715 (6) auth_log: EXPAND %t (6) auth_log: --> Tue Jul 15 17:46:10 2025 (6) [auth_log] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> 78-8A-20-58-6E-4E (6) &Called-Station-Id := 78-8A-20-58-6E-4E (6) EXPAND 0x%{toupper:%{1}%{2}%{3}%{4}%{5}%{6}} (6) --> 0x788A20586E4E (6) &Called-Station-MAC := 0x788a20586e4e (6) } # update request = noop (6) if ("%{8}") { (6) EXPAND %{8} (6) --> CampusInternal (6) if ("%{8}") -> TRUE (6) if ("%{8}") { (6) update request { (6) EXPAND %{8} (6) --> CampusInternal (6) &Called-Station-SSID := CampusInternal (6) } # update request = noop (6) } # if ("%{8}") = noop (6) [updated] = updated (6) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_called_station_id = updated (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "thecampusway.com" for User-Name = "radiustest(a)thecampusway.com" (6) suffix: No such realm "thecampusway.com" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 144 length 99 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Removing EAP session with state 0x8a91dc8e8f01c932 (6) eap: Previous EAP request found for state 0x8a91dc8e8f01c932, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 89 bytes (6) eap_ttls: (TLS) EAP Got all data (89 bytes) (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: User-Name = "radiustest(a)thecampusway.com" (6) eap_ttls: User-Password = “<REDACTED>” (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server google-ldap-auth received request (6) User-Name = "radiustest(a)thecampusway.com" (6) User-Password = “<REDACTED>” (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server google-ldap-auth { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/google-ldap-auth (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) policy filter_inner_identity { (6) if (!&outer.request:User-Name || !&User-Name) { (6) if (!&outer.request:User-Name || !&User-Name) -> FALSE (6) if (&outer.request:User-Name != &User-Name) { (6) if (&outer.request:User-Name != &User-Name) -> FALSE (6) } # policy filter_inner_identity = notfound (6) policy split_username_nai { (6) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (6) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) -> TRUE (6) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (6) update request { (6) EXPAND %{1} (6) --> radiustest (6) &Stripped-User-Name := radiustest (6) } # update request = noop (6) if ("%{3}" != '') { (6) EXPAND %{3} (6) --> thecampusway.com (6) if ("%{3}" != '') -> TRUE (6) if ("%{3}" != '') { (6) update request { (6) EXPAND %{3} (6) --> thecampusway.com (6) &Stripped-User-Domain = thecampusway.com (6) } # update request = noop (6) } # if ("%{3}" != '') = noop (6) [updated] = updated (6) } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy split_username_nai = updated (6) update control { (6) &Cache-Status-Only := yes (6) } # update control = noop (6) cache_auth_accept: EXPAND %{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}} (6) cache_auth_accept: --> c89f862b5de1a9c57ca33dfa15f6a3dd (6) cache_auth_accept: No cache entry found for "c89f862b5de1a9c57ca33dfa15f6a3dd" (6) [cache_auth_accept] = notfound (6) if (ok) { (6) if (ok) -> FALSE (6) update control { (6) &Cache-Status-Only := yes (6) } # update control = noop (6) cache_auth_reject: EXPAND %{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}} (6) cache_auth_reject: --> c89f862b5de1a9c57ca33dfa15f6a3dd (6) cache_auth_reject: No cache entry found for "c89f862b5de1a9c57ca33dfa15f6a3dd" (6) [cache_auth_reject] = notfound (6) if (ok) { (6) if (ok) -> FALSE rlm_ldap (ldap_google): Reserved connection (0) (6) ldap_google: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap_google: --> (uid=radiustest) (6) ldap_google: Performing search in "ou=Users,dc=thecampusway,dc=com" with filter "(uid=radiustest)", scope "sub" (6) ldap_google: Waiting for search result... (6) ldap_google: User object found at DN "uid=radiustest,ou=Staff,ou=Users,dc=thecampusway,dc=com" (6) ldap_google: Resolving group DN "cn=allstaffgroup,ou=Groups,dc=thecampusway,dc=com" to group name (6) ldap_google: Performing unfiltered search in "cn=allstaffgroup,ou=Groups,dc=thecampusway,dc=com", scope "base" (6) ldap_google: Waiting for search result... (6) ldap_google: Group DN "cn=allstaffgroup,ou=Groups,dc=thecampusway,dc=com" resolves to name "allstaffgroup" (6) ldap_google: Resolving group DN "cn=classroom_teachers,ou=Groups,dc=thecampusway,dc=com" to group name (6) ldap_google: Performing unfiltered search in "cn=classroom_teachers,ou=Groups,dc=thecampusway,dc=com", scope "base" (6) ldap_google: Waiting for search result... (6) ldap_google: Group DN "cn=classroom_teachers,ou=Groups,dc=thecampusway,dc=com" resolves to name "classroom_teachers" (6) ldap_google: Adding cacheable user object memberships (6) ldap_google: &control:LDAP-Cached-Membership += "cn=allstaffgroup,ou=Groups,dc=thecampusway,dc=com" (6) ldap_google: &control:LDAP-Cached-Membership += "allstaffgroup" (6) ldap_google: &control:LDAP-Cached-Membership += "cn=classroom_teachers,ou=Groups,dc=thecampusway,dc=com" (6) ldap_google: &control:LDAP-Cached-Membership += "classroom_teachers" (6) ldap_google: Skipping caching group objects as directive 'group.membership_filter' is not set (6) ldap_google: Processing user attributes rlm_ldap (ldap_google): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap_google): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap_google): Waiting for bind result... rlm_ldap (ldap_google): Bind successful (6) [ldap_google] = ok (6) if (&User-Password && !control:Auth-Type) { (6) if (&User-Password && !control:Auth-Type) -> TRUE (6) if (&User-Password && !control:Auth-Type) { (6) update { (6) &control:Auth-Type := LDAP (6) } # update = noop (6) update control { (6) &Cache-Read-Only := yes (6) } # update control = noop (6) cache_ldap_user_dn: EXPAND %{Stripped-User-Name} (6) cache_ldap_user_dn: --> radiustest (6) cache_ldap_user_dn: No cache entry found for "radiustest" (6) [cache_ldap_user_dn] = notfound (6) } # if (&User-Password && !control:Auth-Type) = noop (6) } # authorize = updated (6) Found Auth-Type = LDAP (6) # Executing group from file /etc/freeradius/sites-enabled/google-ldap-auth (6) Auth-Type LDAP { rlm_ldap (ldap_google): Reserved connection (1) (6) ldap_google: Login attempt by "radiustest" (6) ldap_google: Using user DN from request "uid=radiustest,ou=Staff,ou=Users,dc=thecampusway,dc=com" (6) ldap_google: Waiting for bind result... (6) ldap_google: Bind successful (6) ldap_google: Bind as user "uid=radiustest,ou=Staff,ou=Users,dc=thecampusway,dc=com" was successful rlm_ldap (ldap_google): Released connection (1) (6) [ldap_google] = ok (6) } # Auth-Type LDAP = ok (6) # Executing section post-auth from file /etc/freeradius/sites-enabled/google-ldap-auth (6) post-auth { (6) cache_ldap_user_dn: EXPAND %{Stripped-User-Name} (6) cache_ldap_user_dn: --> radiustest (6) cache_ldap_user_dn: No cache entry found for "radiustest" (6) cache_ldap_user_dn: Creating new cache entry (6) cache_ldap_user_dn: &control:LDAP-UserDN = &control:LDAP-UserDN -> 'uid=radiustest,ou=Staff,ou=Users,dc=thecampusway,dc=com' (6) cache_ldap_user_dn: Merging cache entry into request (6) cache_ldap_user_dn: &control:LDAP-UserDN = "uid=radiustest,ou=Staff,ou=Users,dc=thecampusway,dc=com" (6) cache_ldap_user_dn: Committed entry, TTL 86400 seconds (6) [cache_ldap_user_dn] = updated (6) if (&control:Auth-Type == ldap) { (6) if (&control:Auth-Type == ldap) -> TRUE (6) if (&control:Auth-Type == ldap) { (6) cache_auth_accept: EXPAND %{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}} (6) cache_auth_accept: --> c89f862b5de1a9c57ca33dfa15f6a3dd (6) cache_auth_accept: No cache entry found for "c89f862b5de1a9c57ca33dfa15f6a3dd" (6) cache_auth_accept: Creating new cache entry (6) cache_auth_accept: &control:User-Category = "success" (6) cache_auth_accept: Merging cache entry into request (6) cache_auth_accept: &control:User-Category = "success" (6) cache_auth_accept: Committed entry, TTL 7200 seconds (6) [cache_auth_accept] = updated (6) } # if (&control:Auth-Type == ldap) = updated (6) } # post-auth = updated (6) } # server google-ldap-auth (6) Virtual server sending reply (6) eap_ttls: Got tunneled Access-Accept (6) eap_ttls: (TLS) cache - Setting up attributes for session resumption (6) eap_ttls: caching EAP-Type = TTLS (6) eap_ttls: Saving session c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2 in the disk cache (6) eap: Sending EAP Success (code 3) ID 144 length 4 (6) eap: Freeing handler (6) [eap] = ok (6) } # authenticate = ok (6) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (6) post-auth { (6) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (6) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (6) update { (6) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - recv TLS 1.3 Handshake, ClientHello' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 Handshake, ServerHello' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 Handshake, Certificate' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 Handshake, ServerKeyExchange' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 Handshake, ServerHelloDone' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - recv TLS 1.2 Handshake, ClientKeyExchange' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - recv TLS 1.2 Handshake, Finished' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 ChangeCipherSpec' (6) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) TTLS - send TLS 1.2 Handshake, Finished' (6) &reply::TLS-Cache-Filename += &session-state:TLS-Cache-Filename[*] -> '/var/log/freeradius/tlscache/c49ed24456a1e020e39add2bedce356c7437d251c846068e76fc7b75619d92e2.asn1' (6) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (6) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (6) } # update = noop (6) [exec] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) if (EAP-Key-Name && &reply:EAP-Session-Id) { (6) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (6) } # post-auth = noop (6) Sent Access-Accept Id 86 from 172.17.0.2:1812 to 71.59.46.3:57724 length 195 (6) MS-MPPE-Recv-Key = 0x3fbef00a3864ffc7c76f723584a850cb076cca3e20616da912f7a37fdca8430f (6) MS-MPPE-Send-Key = 0x412565d5a06b184aae825b595badecb84ed77e3cb05270eb63856a074077c91a (6) EAP-Message = 0x03900004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) User-Name = "radiustest(a)thecampusway.com" (6) Framed-MTU += 994 (6) Finished request Waking up in 3.2 seconds. (0) Cleaning up request packet ID 80 with timestamp +29 due to cleanup_delay was reached (1) Cleaning up request packet ID 81 with timestamp +29 due to cleanup_delay was reached (2) Cleaning up request packet ID 82 with timestamp +29 due to cleanup_delay was reached (3) Cleaning up request packet ID 83 with timestamp +29 due to cleanup_delay was reached (4) Cleaning up request packet ID 84 with timestamp +29 due to cleanup_delay was reached (5) Cleaning up request packet ID 85 with timestamp +29 due to cleanup_delay was reached Waking up in 1.4 seconds. (6) Cleaning up request packet ID 86 with timestamp +29 due to cleanup_delay was reached Ready to process requests

2 1

Thank you
by Kat 16 Jul '25

16 Jul '25

Gday, Thanks to all and special thank to Alan (not all heroes wear capes). In case anyone else is struggling with error 20 at 0 depth, what I did was to run ./bootstrap in etc/raddb/certs, ensured that the certificates had been copied across to etc/freeradius/certs and then rehashed them by using the following command at root level: c_rehash /etc/freeradius/certs/ Now I need to generate actual proper certificates and not just use example ones. Wish me luck! Kat

2 1