- Freeradius-Users - lists.freeradius.org

freeradius 2.1.10 WARNING: Internal sanity check failed
by joanroldan 13 Jan '11

13 Jan '11

Hi, I am configuring a freeradius for a institution for eduroam purposes, using Fedora 13 and with freeradius 2.1.10. The only EAP type supported is EAP-TTLS/PAP. I attach the radius -X output: FreeRADIUS Version 2.1.10, for host x86_64-redhat-linux-gnu, built on Oct 19 2010 at 20:00:35 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = yes dead_time = 120 wake_all_if_all_dead = no } realm NULL { nostrip authhost = LOCAL accthost = LOCAL } realm DEFAULT { nostrip authhost = X.X.X.X:1812 accthost = X.X.X.X:1813 secret = verysecret } realm irta.cat { nostrip authhost = 192.168.1.34 accthost = 192.168.1.34 secret = ****** } realm irta.es { nostrip authhost = 192.168.1.34 accthost = 192.168.1.34 secret = ****** } realm IRTA_NT { nostrip authhost = 192.168.1.34 accthost = 192.168.1.34 secret = ****** } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client X.X.X.X { require_message_authenticator = no secret = "******" shortname = "RADIUS_Anella" } client X.X.X.X0 { require_message_authenticator = no secret = "******" shortname = "ISA" } client X.X.X.X1 { require_message_authenticator = no secret = "******" shortname = "ISA" } client X.X.X.X2 { require_message_authenticator = no secret = "******" shortname = "ISA" } client 172.18.1.10 { require_message_authenticator = no secret = "******" shortname = "WLC_SSCC" } client 172.18.2.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Cabrils" } client 172.18.3.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Monells" } client 172.18.5.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Lleida" } client 172.18.6.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Mas_de_Bover" } client 172.18.8.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Sant_Carles_Rapita_Ebre" } client 172.18.10.10 { require_message_authenticator = no secret = "******" shortname = "WLC_Torra_Marimon" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = yes cisco_accounting_username_bug = yes max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/sr013_irta_es.key" certificate_file = "/etc/raddb/certs/certificat_es.cer" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "******" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating module "ntdomain" from file /etc/raddb/modules/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking pre-proxy {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "pre_proxy_log" from file /etc/raddb/modules/detail.log detail pre_proxy_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-proxy {...} for more modules to load Module: Instantiating module "post_proxy_log" from file /etc/raddb/modules/detail.log detail post_proxy_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = X.X.X.X port = 1812 } listen { type = "acct" ipaddr = X.X.X.X port = 1813 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address X.X.X.X port 1812 Listening on accounting address X.X.X.X port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address X.X.X.X port 1814 Ready to process requests. Using a client with Windows 7 and supplicant SecureW2 I get the next warning: rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0xce819241867a6c729cd1ce2fbc6f1871 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] Looking up realm "cesca.cat" for User-Name = ************ [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user ************ to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated [eap] Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Proxying request 2 to home server 84.88.0.19 port 1812 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Going to the next request Waking up in 0.9 seconds. Waking up in 12.9 seconds. rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 Sending duplicate proxied request to home server 84.88.0.19 port 1812 - ID: 158 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Waking up in 11.9 seconds. rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 Sending duplicate proxied request to home server 84.88.0.19 port 1812 - ID: 158 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Waking up in 9.9 seconds. rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 Sending duplicate proxied request to home server 84.88.0.19 port 1812 - ID: 158 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Waking up in 7.9 seconds. rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 Sending duplicate proxied request to home server 84.88.0.19 port 1812 - ID: 158 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Waking up in 5.9 seconds. rad_recv: Access-Request packet from host X.X.X.X port 46577, id=9, length=203 Sending duplicate proxied request to home server 84.88.0.19 port 1812 - ID: 158 Sending Access-Request of id 158 to 84.88.0.19 port 1812 User-Name = ************ Calling-Station-Id = "00-26-B6-59-F1-EA" Called-Station-Id = "00-22-55-F1-80-B0:eduroam" NAS-Port = 1 NAS-IP-Address = 172.18.1.10 NAS-Identifier = "WLC_SSCC" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "50" EAP-Message = 0x0203001a0170726f7665735f697274614063657363612e636174 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x39 Waking up in 3.9 seconds. WARNING: Internal sanity check failed in event handler for request 2: Discarding the request! Ready to process requests. So I have mainly tho doubts: First, one why this warning happens and how to solve it. Second one, is it normal that EAP-TTLS does not begin? Thanks in advance, Joan. -- View this message in context: http://freeradius.1045715.n5.nabble.com/freeradius-2-1-10-WARNING-Internal-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 4

The decoded content is not same as command in CoA
by Xiaochen 13 Jan '11

13 Jan '11

Dear all, I am using Fedora 12 + Freeradius to do some CoA tests. One is : AAA sends Disconnect request to Client. My packet.txt content is as: ---------------------------------------------------------------------------- ----- Acct-Session-Id="00000001" Calling-Station-Id="001E310008CC" User-Name="wimax" X-Ascend-Session-Svr-Key="0123456789" NAS-IP-Address=100.1.6.4 NAS-Identifier=CATR WiMAX-DM-Action-Code="0" WiMAX-AAA-Session-Id="00000002" ---------------------------------------------------------------------------- ----- But when I run it in the command terminal, the screen said as below: ---------------------------------------------------------------------------- ----- [root@AAA bin]# cat packet.txt | radclient -x 100.1.6.4:3799 disconnect 0123456789 Sending Disconnect-Request of id 53 to 100.1.6.4 port 3799 Acct-Session-Id = "00000001" Calling-Station-Id = "001E310008CC" User-Name = "wimax" X-Ascend-Session-Svr-Key = "0123456789" NAS-IP-Address = 100.1.6.4 NAS-Identifier = "CATR" WiMAX-DM-Action-Code = 0x30 WiMAX-AAA-Session-Id = 0x3030303030303032 rad_recv: Disconnect-NAK packet from host 100.1.6.4 port 3799, id=53, length=20 ---------------------------------------------------------------------------- ----- I don't know why WiMAX-DM-Action-Code content was changed. If I change the value in packetet.txt to 0xffff, I can get the decoded content in screen as 0xff. The Wireshark can also get the changed content. Can you give me any suggestions? Thanks for your help. Xiaochen 13/1/2011

3 2

ldap cache
by Frank Cusack 13 Jan '11

13 Jan '11

http://freeradius.org/radiusd/doc/tuning_guide (also in the distro) LDAP MODULE o Enable caching in the ldap module ... I can find no such feature, does this actually exist in the ldap module or is there another way to cache ldap results? Did it used to exist? Ideally I'd like to be able to consult ldap but after a configured timeout simply use a cached result. Obviously I could do this with a script but why not have it all built-in. thanks.

3 2

Sending an attribute with the Access-Accept instead of Access-Challenge
by Vivek Umasuthan 12 Jan '11

12 Jan '11

Hi All, I am testing 802.1x support on our platform and I'm having trouble figuring out how to include some attributes with Access-Accept. I read the 'users' file man page but could not get the answer. So my user is as shown below in the users file qatester Cleartext-Password := "qatester" Session-Timeout = 20, Termination-Action = 1 Now the authorization works fine but the Session-Timeout attribute is ncluded in the Access-Challenge message as I understand. I want to send it with the Access-Accept message. I have copied debug information below. ############## Debug Infor Starts ################## rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=66, length=106 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 EAP-Message = 0x0202000d017161746573746572 Message-Authenticator = 0x29d87ac1ec4ca82352df5fe82cc5849e # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry qatester at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 66 to 192.168.0.159 port 4999 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x0103001604109e9fffb0d5e6393e5ef410df900b8d2f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb68ce3cd51b0b4c1f6b1aa976 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=67, length=117 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb68ce3cd51b0b4c1f6b1aa976 EAP-Message = 0x020300060319 Message-Authenticator = 0x7a4fba042bc71fbee8de9b56077c2ca8 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry qatester at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 67 to 192.168.0.159 port 4999 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb69c921d51b0b4c1f6b1aa976 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=68, length=233 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb69c921d51b0b4c1f6b1aa976 EAP-Message = 0x0204007a198000000070160301006b0100006703014d2dbcb9a99cbfaf828b78feb5deaaf1ee341152fe91df965d169a89dee7048e000018002f00350005000ac013c014c009c00a003200380013000401000026ff010001000000000d000b0000087161746573746572000a0006000400170018000b00020100 Message-Authenticator = 0xa246d84f9ddb81f240afcf2e322c88c9 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 112 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 01c7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 68 to 192.168.0.159 port 4999 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x28fe6ccf30d72506f8a836ce1ffa16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6ac821d51b0b4c1f6b1aa976 Finished request 2. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=69, length=319 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6ac821d51b0b4c1f6b1aa976 EAP-Message = 0x020500d01980000000c6160301008610000082008034f094933081749819a81c8fc561c2ef8a60263d6acf6360211b5ae43c840a0f74e7392817971a93c55bbf9e76443b1500fc80031616f4991ddd18dc6917b02e0a4e5ddfa781c99d7f46025694de47cf7f3df537b78ea541b395b749fbece93ea68e0ef09d913a59215b1a73e3d2917b3cd65d2e4fafa57084f19a33ad3cc9a6140301000101160301003004981ccf99aada36e602deaff108ab6754718d2795fbdb47cb4aef2a266e9129956f2f6816bdb11c99e69cdeb356f95f Message-Authenticator = 0x43bb361280528e5b0bb8ffeaa6066664 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 69 to 192.168.0.159 port 4999 EAP-Message = 0x01060041190014030100010116030100307f0fc86e3f93a5310b3546c6dc6a9ff101bd3fac208a68e94852b0e862a0185c93e84bd423a01047b3a71b584c95e305 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6bcb21d51b0b4c1f6b1aa976 Finished request 3. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=70, length=117 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6bcb21d51b0b4c1f6b1aa976 EAP-Message = 0x020600061900 Message-Authenticator = 0x55a47ca2aa8532afc337360c4d4ea55b # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 70 to 192.168.0.159 port 4999 EAP-Message = 0x0107002b190017030100205302a790bac2f45d29df768df9b13962d86effcc264c8bc1cca510c72513b6ec Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6cca21d51b0b4c1f6b1aa976 Finished request 4. Going to the next request Waking up in 3.4 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=71, length=154 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6cca21d51b0b4c1f6b1aa976 EAP-Message = 0x0207002b190017030100209decffdfd6c00699e24cd793265f30028937c7c50808936f717fa81d148593ce Message-Authenticator = 0x257a80aa49d86acb1f3112cfa102da7e # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - qatester [peap] Got inner identity 'qatester' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0207000d017161746573746572 server { PEAP: Setting User-Name to qatester Sending tunneled request EAP-Message = 0x0207000d017161746573746572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "qatester" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry qatester at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x010800221a0108001d106ef613ff24d68155ebabf27c814008277161746573746572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x45767b5d457e612613612e72d3be89f8 [peap] Got tunneled reply RADIUS code 11 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x010800221a0108001d106ef613ff24d68155ebabf27c814008277161746573746572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x45767b5d457e612613612e72d3be89f8 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 71 to 192.168.0.159 port 4999 EAP-Message = 0x0108004b19001703010040e22d2314e64447e30cfe5df1f66c8391a523f942bc14beec164f6793729ebfb63bcaa3b43194b5c505d3c0f33e7bd905c52a608bac1b1dd45550b8a8a56a308a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6dc521d51b0b4c1f6b1aa976 Finished request 5. Going to the next request Waking up in 2.8 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=72, length=218 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6dc521d51b0b4c1f6b1aa976 EAP-Message = 0x0208006b19001703010060c71b73411e3216a7308b5d4572da3a1c384b630541eec6dd6988ca61eb2c379fe85e31dc56ac14c694e32d0ccbefe65ec892a307d2e45e30fd1f8164ac7289717daebc94eca9e36ac18e13febf45ef974774b1f08a7426a56c482d2deed5a966 Message-Authenticator = 0xb2002fa406169f6f73889c6d9d1cec50 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020800431a0208003e31744787c6cd670c93abf03715268692ca00000000000000000d103f579e41477a49f40c4793ce60099c480ff0a423c097007161746573746572 server { PEAP: Setting User-Name to qatester Sending tunneled request EAP-Message = 0x020800431a0208003e31744787c6cd670c93abf03715268692ca00000000000000000d103f579e41477a49f40c4793ce60099c480ff0a423c097007161746573746572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "qatester" State = 0x45767b5d457e612613612e72d3be89f8 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 67 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry qatester at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: qatester [mschap] Told to do MS-CHAPv2 for qatester with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x010900331a0308002e533d42414242313046414244344530424136373936393141433033334636383132353043414142383734 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x45767b5d447f612613612e72d3be89f8 [peap] Got tunneled reply RADIUS code 11 Session-Timeout = 20 Termination-Action = RADIUS-Request EAP-Message = 0x010900331a0308002e533d42414242313046414244344530424136373936393141433033334636383132353043414142383734 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x45767b5d447f612613612e72d3be89f8 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 72 to 192.168.0.159 port 4999 EAP-Message = 0x0109005b19001703010050f89f3653bfbac15816fac0abbf255ae7afe338b35de7b934b9ce3c84d4c67f24f4f8768a7433bb41fbcf164c5c4cd2511fdd798fee758f69a1a10b04740f5337155c3cb5a687e5ec73bd8aa936d941bd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6ec421d51b0b4c1f6b1aa976 Finished request 6. Going to the next request Waking up in 2.3 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=73, length=154 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6ec421d51b0b4c1f6b1aa976 EAP-Message = 0x0209002b190017030100202573df7fb9bf03b8ccab9c0809819fe243d5fa88d1bb02e8da133f894de24698 Message-Authenticator = 0x40a32142c983f273e58599f32177233d # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900061a03 server { PEAP: Setting User-Name to qatester Sending tunneled request EAP-Message = 0x020900061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "qatester" State = 0x45767b5d447f612613612e72d3be89f8 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry qatester at line 139 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok WARNING: Empty post-auth section. Using default return values. # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel } # server inner-tunnel [peap] Got tunneled reply code 2 Session-Timeout = 20 Termination-Action = RADIUS-Request MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0xba82eb99732d9db96c70b08d7bdafddc MS-MPPE-Recv-Key = 0xb4088afb08704fb8ca64720c6fcbc77c EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "qatester" [peap] Got tunneled reply RADIUS code 2 Session-Timeout = 20 Termination-Action = RADIUS-Request MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0xba82eb99732d9db96c70b08d7bdafddc MS-MPPE-Recv-Key = 0xb4088afb08704fb8ca64720c6fcbc77c EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "qatester" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 73 to 192.168.0.159 port 4999 EAP-Message = 0x010a002b190017030100208045b3ae000c06c0abbe9948be6d301bd29b591b723b0edcd2a2d6e9c49c2558 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x68cd38bb6fc721d51b0b4c1f6b1aa976 Finished request 7. Going to the next request Waking up in 1.8 seconds. rad_recv: Access-Request packet from host 192.168.0.159 port 4999, id=74, length=154 Calling-Station-Id = "00-1A-6B-66-DD-7E" NAS-Port = 1 User-Name = "qatester" NAS-IP-Address = 192.168.0.159 Service-Type = Framed-User Framed-MTU = 1500 State = 0x68cd38bb6fc721d51b0b4c1f6b1aa976 EAP-Message = 0x020a002b190017030100202a8bde6d671d1e7f8012e74ef38a2dccefc668364f730701c793ced2e0f3736a Message-Authenticator = 0x5101b1681c2454098b702a833e4cdc7e # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "qatester", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 74 to 192.168.0.159 port 4999 MS-MPPE-Recv-Key = 0x21bfe2d7387e3b7cbabb239220361ad29d9930221ad77fb58301d592f56b2fce MS-MPPE-Send-Key = 0x2a1c63b2a37cb6d46334461bf0bc561c90cf310e7f9d226e9b33b203975b274b EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "qatester" Finished request 8. Going to the next request Waking up in 1.3 seconds. Cleaning up request 0 ID 66 with timestamp +6 Cleaning up request 1 ID 67 with timestamp +6 Waking up in 0.5 seconds. Cleaning up request 2 ID 68 with timestamp +7 Waking up in 0.5 seconds. Cleaning up request 3 ID 69 with timestamp +7 Waking up in 0.4 seconds. Cleaning up request 4 ID 70 with timestamp +8 Waking up in 0.5 seconds. Cleaning up request 5 ID 71 with timestamp +8 Waking up in 0.5 seconds. Cleaning up request 6 ID 72 with timestamp +9 Waking up in 0.5 seconds. Cleaning up request 7 ID 73 with timestamp +9 Waking up in 0.5 seconds. Cleaning up request 8 ID 74 with timestamp +10 Ready to process requests. ############# Debug info Ends ################ >From what I see above I do not think the Access-Accept message has the Session timeout attribute. What am I doing wrong? Thanks, Vivek Umasuthan

2 4

Freeradius GUI Interfaces Available?
by Jim Rice 12 Jan '11

12 Jan '11

New to freeradius list. Greetings. Can someone direct me to more information about Radius GUI Interfaces? Is dialup-admin all there is? (Does not seem to be included in rpm pkg.) freeradius2-2.1.7-7.el5 (CentOS 5) Thanks.

1 0

freeradius with OTP key
by Kelly Kloen 12 Jan '11

12 Jan '11

Hi there, I have freeradius 2.1.10 working with a OTP yubikey. If i test it with radtest user password+OTP etc i get ACCEPT-ACCEPT But when we want to test it with a website ( http://breul.swp.nl ) Get this : rad_recv: Access-Request packet from host 192.168.5.1 port 4345, id=3, length=94 Service-Type = Login-User User-Name = "kekl(a)administratie.net" User-Password = "NM\346\301\023\251\261[IW\310\"\260\375\344\007" NAS-IP-Address = 192.168.5.16 NAS-Identifier = "192.168.5.16" NAS-Port-Type = Virtual Why is it giving the [blablabla] And not like the radtest : rad_recv: Access-Request packet from host 127.0.0.1 port 45296, id=208, length=122 User-Name = "kekl(a)administratie.net" User-Password = "henkcccccccbnghevltlvivrtdtedeehvckvhrenlkeudugr" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Gr kloenie And this is the whole log file : FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 17 2010 at 04:06:04 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.5.1 { require_message_authenticator = no secret = "herman" shortname = "dcad" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pam Module: Instantiating module "pam" from file /etc/freeradius/modules/pam pam { pam_auth = "radiusd" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 45296, id=208, length=122 User-Name = "kekl(a)administratie.net" User-Password = "henkcccccccbnghevltlvivrtdtedeehvckvhrenlkeudugr" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "administratie.net" for User-Name = "kekl(a)administratie.net" [suffix] No such realm "administratie.net" ++[suffix] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 145 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = PAM # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} pam_pass: using pamauth string <radiusd> for pam.conf lookup pam_pass: authentication succeeded for <kekl(a)administratie.net> ++[pam] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 208 to 127.0.0.1 port 45296 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 208 with timestamp +24 Ready to process requests. rad_recv: Access-Request packet from host 192.168.5.1 port 4345, id=3, length=94 Service-Type = Login-User User-Name = "kekl(a)administratie.net" User-Password = "NM\346\301\023\251\261[IW\310\"\260\375\344\007" NAS-IP-Address = 192.168.5.16 NAS-Identifier = "192.168.5.16" NAS-Port-Type = Virtual # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "administratie.net" for User-Name = "kekl(a)administratie.net" [suffix] No such realm "administratie.net" ++[suffix] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 145 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = PAM # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} pam_pass: using pamauth string <radiusd> for pam.conf lookup pam_pass: function pam_authenticate FAILED for <kekl(a)administratie.net>. Reason: Authentication failure ++[pam] returns reject Failed to authenticate the user. WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS! Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> kekl(a)administratie.net attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 3 to 192.168.5.1 port 4345 Waking up in 4.9 seconds. Cleaning up request 1 ID 3 with timestamp +47 Ready to process requests.

2 1

Re: [RESOVLED] Re: customize Post-Auth-Type REJECT
by bishalpun 12 Jan '11

12 Jan '11

Hi, I am trying to do the same things but I am not able to success. I am getting rejected after user Max-Total-Octets is reached. below is my config file in /etc/freeradius/site-enable/default authorize { .. Auth-Type LDAP { ldap } # # Allow EAP authentication. #eap } noresetbytescounter{ reject = 1 } if(reject) { update reply { Reply-Message := "You have reached your data volume limit. Connecting with Limited Bandwidth." Filter-Id := "64/64" } update control { Auth-Type := "Accept" } ok } -- View this message in context: http://freeradius.1045715.n5.nabble.com/RESOLVED-customize-Post-Auth-Type-R… Sent from the FreeRadius - User mailing list archive at Nabble.com.

1 0

Proxy Attributes
by Hilton Boyce 11 Jan '11

11 Jan '11

Hi Is it possible to add a value from mysql database to an acct request packet before proxying to a server. regards Hilton

2 2

Verify certificate <-> mac mapping in openldap..
by Christ Schlacta 11 Jan '11

11 Jan '11

so I've done some research, looking at how freeradius works now, it manages to identify hostnames from certificates which are issued to a given host, blah blah blah. suffice it to say when "lain" authenticates, it knows it's lain. I want to make sure that lain's MAC address matches what I know lain's mac address to be. more importantly, if lain's mac address isn't known, I'd like it to log the mac address (which it does now already) and NOT give an error. Also, I'd like to be able to shove hosts into groups, such as "disabled". I need advice on just what information needs to be stored in openldap, and just which changes need to be made to freeradius. I've done a little independent research, and I think I can use a definition for a host as a "device" with a cn, and an "ieee802Device" with a mac address. I can create a group of unique names, or is there some other mechanism I have to use for groups to work with freeradius? will this scheme work with freeradius? is there some better, more established standard to store this mapping of hostname from certificate to mac address? and last, but not least, what do I have to do to make sure that an absence of mac address doesn't trigger a failure, but the presence of a wrong mac address does?

3 3

Unable to get FreeRADIUS working with MySQL
by Stephen Tyers 11 Jan '11

11 Jan '11

Hi, I am running FreeRADIUS Version 1.1.3, for host x86_64-redhat-linux-gnu (from the CentOS repositories) and am having problem getting it working with MySQL. The specific error message that I am seeing is: ... rlm_sql (sql): Released sql socket id: 4 modcall[authorize]: module "sql" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System auth: type "System" ERROR: Unknown value specified for Auth-Type. Cannot perform requested action. auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request ... After testing with the following command: /usr/bin/radtest test_user password 127.0.0.1 1812 sharedsecret It seems like the sql module is set up correctly, because the authorize section returns ok. However, the authentication section does not check the database, but rather uses the DEFAULT user, which has 'Auth-Type' set to 'System'. This returns an error and the request is rejected. How do I get 'rad_check_password' to check the database instead of the looking at the system users? Is there an 'Auth-Type' of 'SQL' which I could use? Thank you Stephen

3 2