- Freeradius-Users - lists.freeradius.org

EAP-PEAP fatal unknown_ca
by westwood 08 Nov '10

08 Nov '10

*freeradius2.1.8 1、 win7+protected EAP(peap)+wpa-enterprise (laptop name :leeyu-laptop) 2、 i have install ca.der on the win7 and winxp 3、 winxp+**protected EAP(peap)**+ca testing successfully, but win7 fails ERROR happened before win7 prompted me to enter username&&password.....,freeradius debug: * Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/freeradius//var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.1 port 3075, id=144, length=191 User-Name = "host/Leeyu-Laptop" NAS-IP-Address = 192.168.0.1 NAS-Port = 0 Called-Station-Id = "00195b04c9e2" Calling-Station-Id = "001e659fc674" NAS-Identifier = "Realtek Access Point. 8181" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001601686f73742f4c656579752d4c6170746f70 Message-Authenticator = 0x2cca1e2672315cf4764cc0fd2544dfe3 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Capitek.com] No '@' in User-Name = "host/Leeyu-Laptop", looking up realm NULL [Capitek.com] No such realm "NULL" ++[Capitek.com] returns noop [eap] EAP packet type response id 0 length 22 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sql_oracle] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [sql_oracle] ... expanding second conditional [sql_oracle] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [sql_oracle] expand: %{User-Name:-DEFAULT} -> host/Leeyu-Laptop [sql_oracle] expand: %{Stripped-User-Name:-%{User-Name:-DEFAULT}} -> host/Leeyu-Laptop [sql_oracle] sql_set_user escaped user --> 'host/Leeyu-Laptop' rlm_sql (sql_oracle): Reserving sql socket id: 18 [sql_oracle] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'host/Leeyu-Laptop' ORDER BY id [sql_oracle] User found in radcheck table [sql_oracle] expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'host/Leeyu-Laptop' ORDER BY id [sql_oracle] expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' -> SELECT GroupName FROM radusergroup WHERE UserName='host/Leeyu-Laptop' rlm_sql (sql_oracle): Released sql socket id: 18 ++[sql_oracle] returns ok [bklist] No Max-Attempts defined. ++[bklist] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 144 to 192.168.0.1 port 3075 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x246ddb0b246cc225aad5e24c6756cf9c Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.1 port 3075, id=145, length=307 User-Name = "host/Leeyu-Laptop" NAS-IP-Address = 192.168.0.1 NAS-Port = 0 Called-Station-Id = "00195b04c9e2" Calling-Station-Id = "001e659fc674" NAS-Identifier = "Realtek Access Point. 8181" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0201007e198000000074160301006f0100006b03014cd4fdcd261077436d24f643f2f64fd5b4c4cb53d980a2f2400f17f2fd6205e8000018002f00350005000ac013c014c009c00a00320038001300040100002aff0100010000000011000f00000c6c656579752d6c6170746f70000a0006000400170018000b00020100 State = 0x246ddb0b246cc225aad5e24c6756cf9c Message-Authenticator = 0x08b295f4b9501d45e89fda21cf14c8ad +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Capitek.com] No '@' in User-Name = "host/Leeyu-Laptop", looking up realm NULL [Capitek.com] No such realm "NULL" ++[Capitek.com] returns noop [eap] EAP packet type response id 1 length 126 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 116 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006f], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085c], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 145 to 192.168.0.1 port 3075 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x43f31ceede8c211b49965710ac8ce6e362addd4d741bdf59fa081bfe86fe3e43cf8289e8ed4e151da4460204318b808959194ba8196e0e6af6d15bd032b1d87a3a34ad2e62982cef6534d7b364afe0241ca534984b2d8d770795fed8e5857bd155a2cc7207d81012fe262344ff32882baa32713ebb2ed1b5d246bcee1dfc31faa51392a1b9578091814034b56bb39fa012062352b08aae929a508b4ec41fe06a071ed6216a360d14253023e52e327bf1b0ebdd2cf0e67b3edc72a134750781b41558f23b9e5cca09558d0203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d0101040500038201010045 EAP-Message = 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 EAP-Message = 0x0ac70004a8308204a4308203 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x246ddb0b256fc225aad5e24c6756cf9c Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.1 port 3075, id=146, length=187 User-Name = "host/Leeyu-Laptop" NAS-IP-Address = 192.168.0.1 NAS-Port = 0 Called-Station-Id = "00195b04c9e2" Calling-Station-Id = "001e659fc674" NAS-Identifier = "Realtek Access Point. 8181" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0x246ddb0b256fc225aad5e24c6756cf9c Message-Authenticator = 0xafa36e7177fb2841b5512080ba8fa1f6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Capitek.com] No '@' in User-Name = "host/Leeyu-Laptop", looking up realm NULL [Capitek.com] No such realm "NULL" ++[Capitek.com] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 146 to 192.168.0.1 port 3075 EAP-Message = 0x010303fc19408ca003020102020900a82c41eeeb4a4d37300d06092a864886f70d0101050500308192310b300906035504061302434e3110300e060355040813074361706974656b3110300e060355040713074265696a696e6731153013060355040a130c4361706974656b20496e632e3120301e06092a864886f70d010901161161646d696e404361706974656b2e636f6d312630240603550403131d4361706974656b20436572746966696361746520417574686f72697479301e170d3130313032333039333434365a170d3131313032333039333434365a308192310b300906035504061302434e3110300e060355040813074361706974656b EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x6d1762af9cc32f77 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x246ddb0b266ec225aad5e24c6756cf9c Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.1 port 3075, id=147, length=187 User-Name = "host/Leeyu-Laptop" NAS-IP-Address = 192.168.0.1 NAS-Port = 0 Called-Station-Id = "00195b04c9e2" Calling-Station-Id = "001e659fc674" NAS-Identifier = "Realtek Access Point. 8181" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x246ddb0b266ec225aad5e24c6756cf9c Message-Authenticator = 0x09cd348a564b11f4a1a5ee3f8aad59a8 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Capitek.com] No '@' in User-Name = "host/Leeyu-Laptop", looking up realm NULL [Capitek.com] No such realm "NULL" ++[Capitek.com] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 147 to 192.168.0.1 port 3075 EAP-Message = 0x010400ba1900f2af5e0bbbca5b63619eda4eafebcc8ce7dd49123dec621a9ee82327050c940e017b605759c85305c408f8e295be432e983bc762c496a9d45daa7044bfb8914236f4a38e213c5f16ac998128ca6f463e57823c7ed2e85ede9522f53be56f523460033146a70d509fa700ea0d7b139040adece74cd15c33064e4604d955a0cdbdfca05de47f8dd88d49935506ed4e61e8beb817af9ba7b135faa8ed6f63239f855d144a1887b38ee114f4a916030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x246ddb0b2769c225aad5e24c6756cf9c Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.1 port 3075, id=148, length=198 User-Name = "host/Leeyu-Laptop" NAS-IP-Address = 192.168.0.1 NAS-Port = 0 Called-Station-Id = "00195b04c9e2" Calling-Station-Id = "001e659fc674" NAS-Identifier = "Realtek Access Point. 8181" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0204001119800000000715030100020230 State = 0x246ddb0b2769c225aad5e24c6756cf9c Message-Authenticator = 0x540a124a43aaa2b5ab81e6c6c5ae9452 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [Capitek.com] No '@' in User-Name = "host/Leeyu-Laptop", looking up realm NULL [Capitek.com] No such realm "NULL" ++[Capitek.com] returns noop [eap] EAP packet type response id 4 length 17 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 7 [peap] Length Included [peap] eaptls_verify returned 11 *[peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation* [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} ++[bklist] returns noop [sql_oracle] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [sql_oracle] ... expanding second conditional [sql_oracle] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [sql_oracle] expand: %{User-Name:-DEFAULT} -> host/Leeyu-Laptop [sql_oracle] expand: %{Stripped-User-Name:-%{User-Name:-DEFAULT}} -> host/Leeyu-Laptop [sql_oracle] sql_set_user escaped user --> 'host/Leeyu-Laptop' [sql_oracle] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '<Crypted>', '%{reply:Packet-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')) -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'host/Leeyu-Laptop', '<Crypted>', 'Access-Reject', TO_DATE('2010-11-06 15:04:59','yyyy-mm-dd hh24:mi:ss')) rlm_sql (sql_oracle) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'host/Leeyu-Laptop', '<Crypted>', 'Access-Reject', TO_DATE('2010-11-06 15:04:59','yyyy-mm-dd hh24:mi:ss')) rlm_sql (sql_oracle): Reserving sql socket id: 17 rlm_sql (sql_oracle): Released sql socket id: 17 ++[sql_oracle] returns ok [attr_filter.access_reject] expand: %{User-Name} -> host/Leeyu-Laptop attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 4 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 4 Sending Access-Reject of id 148 to 192.168.0.1 port 3075 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 144 with timestamp +3 Cleaning up request 1 ID 145 with timestamp +3 Cleaning up request 2 ID 146 with timestamp +3 Cleaning up request 3 ID 147 with timestamp +3 Waking up in 1.0 seconds. Cleaning up request 4 ID 148 with timestamp +3 Ready to process requests. * winxp do not send its hostname to radius server,but win7 will...,and how this happened ?*

2 1

urgent help about login Auth: Login incorrect
by ann kok 07 Nov '10

07 Nov '10

Hi all I am using the NTRadping is fine for user. The radius log is showing "Auth: Login OK:" But when I try it via Lns, it won't work. It shows "Login incorrect" in the same user in NTRadping What is this problem? How can I check it? Thank you so much.

2 3

Clear text password not available issue
by ann kok 07 Nov '10

07 Nov '10

Hi I am trying new FreeRADIUS Version 2.0.4 and testing Ntrping software The radius log keep saying that Auth: Login incorrect (rlm_chap: Clear text password not available I already tried different password attribute eg: CHAP-Password, Cleartext-Password and User-Password All won't work I am also seaching the google and FAQ too Could you help what I am doing wrong? Thank you

2 1

Authentication doesn't work anymore
by snowman5840 07 Nov '10

07 Nov '10

Hi I'm going crazy with my RADIUS configuration. For some days all works. But now i can't authenticate with xp client, linux still works. It seams that it is a problem with the EAP configuration or with the certificates, but i doesn't find any error in the debug output!? Maybe this will be the problem, "[eap] No EAP Start, assuming it's an on-going EAP conversation" but I don't know waht i can do. Please give me some futher hints. I want to authenticate with EAP-PEAP and MSCHAP. rad_recv: Access-Request packet from host 192.168.0.2 port 1812, id=43, length=145 NAS-IP-Address = 192.168.0.2 NAS-Port = 50005 NAS-Port-Type = Ethernet User-Name = "FIRMA1\\usera" Called-Station-Id = "00-15-F9-D8-7C-C5" Calling-Station-Id = "00-1A-4B-63-69-0B" Service-Type = Framed-User Framed-MTU = 1500 EAP-Message = 0x02000014014649524d41315c626c657273636861 Message-Authenticator = 0x7371c1f1726066beb9dabe848c328593 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] expand: %t -> Sun Nov 7 11:36:33 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "FIRMA1" for User-Name = "FIRMA1\usera" [ntdomain] Found realm "FIRMA1" [ntdomain] Adding Stripped-User-Name = "usera" [ntdomain] Adding Realm = "FIRMA1" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 0 length 20 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for usera [ldap] expand: %{Stripped-User-Name} -> usera [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=usera) [ldap] expand: dc=firma1,dc=de -> dc=firma1,dc=de [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=firma1,dc=de, with filter (uid=usera) [ldap] Added User-Password = {SSHA}WNtfzJKztV/VYNqJAew//EpfaqFTTmRY in check items [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3043423639343838303546373937424632413832383037393733423839353337 [ldap] sambaLmPassword -> LM-Password == 0x3031464335413642453742433639323941414433423433354235313430344545 [ldap] looking for reply items in directory... [ldap] user usera authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 43 to 192.168.0.2 port 1812 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5811fdbe58006df807df3f78bad2b67 Finished request 42. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.2 port 1812, id=44, length=230 NAS-IP-Address = 192.168.0.2 NAS-Port = 50005 NAS-Port-Type = Ethernet User-Name = "FIRMA1\\usera" Called-Station-Id = "00-15-F9-D8-7C-C5" Calling-Station-Id = "00-1A-4B-63-69-0B" Service-Type = Framed-User Framed-MTU = 1500 State = 0xe5811fdbe58006df807df3f78bad2b67 EAP-Message = 0x0201005719800000004d16030100480100004403014cd6813031d93b50d4e589daaf39973f09262a8588b4684bfd4c30b952c9245a00001600040005000a0009006400620003000600130012006301000005ff01000100 Message-Authenticator = 0xc287af478d7c193cfcec6b09c33c099c +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] expand: %t -> Sun Nov 7 11:36:33 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "FIRMA1" for User-Name = "FIRMA1\usera" [ntdomain] Found realm "FIRMA1" [ntdomain] Adding Stripped-User-Name = "usera" [ntdomain] Adding Realm = "FIRMA1" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 1 length 87 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 77 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0048], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 07d8], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 44 to 192.168.0.2 port 1812 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x550406130244453116301406 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5811fdbe48306df807df3f78bad2b67 Finished request 43. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.2 port 1812, id=45, length=149 NAS-IP-Address = 192.168.0.2 NAS-Port = 50005 NAS-Port-Type = Ethernet User-Name = "FIRMA1\\usera" Called-Station-Id = "00-15-F9-D8-7C-C5" Calling-Station-Id = "00-1A-4B-63-69-0B" Service-Type = Framed-User Framed-MTU = 1500 State = 0xe5811fdbe48306df807df3f78bad2b67 EAP-Message = 0x020200061900 Message-Authenticator = 0x6595267991b7298210d423ea9e5e7e34 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] expand: %t -> Sun Nov 7 11:36:33 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "FIRMA1" for User-Name = "FIRMA1\usera" [ntdomain] Found realm "FIRMA1" [ntdomain] Adding Stripped-User-Name = "usera" [ntdomain] Adding Realm = "FIRMA1" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 45 to 192.168.0.2 port 1812 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xe30c97f4b32d6d07 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5811fdbe78206df807df3f78bad2b67 Finished request 44. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.2 port 1812, id=46, length=149 NAS-IP-Address = 192.168.0.2 NAS-Port = 50005 NAS-Port-Type = Ethernet User-Name = "FIRMA1\\usera" Called-Station-Id = "00-15-F9-D8-7C-C5" Calling-Station-Id = "00-1A-4B-63-69-0B" Service-Type = Framed-User Framed-MTU = 1500 State = 0xe5811fdbe78206df807df3f78bad2b67 EAP-Message = 0x020300061900 Message-Authenticator = 0x5b1899fb14339eca7ba59de266860af7 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] expand: %t -> Sun Nov 7 11:36:33 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "FIRMA1" for User-Name = "FIRMA1\usera" [ntdomain] Found realm "FIRMA1" [ntdomain] Adding Stripped-User-Name = "usera" [ntdomain] Adding Realm = "FIRMA1" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 46 to 192.168.0.2 port 1812 EAP-Message = 0x0104003619000f0b409c6f7dd2e83b8a1ad34c1b43c61b5cfa499e7822f081073040ea4c9280acd2686fd194f216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5811fdbe68506df807df3f78bad2b67 Finished request 45. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.2 port 1812, id=47, length=149 NAS-IP-Address = 192.168.0.2 NAS-Port = 50005 NAS-Port-Type = Ethernet User-Name = "FIRMA1\\usera" Called-Station-Id = "00-15-F9-D8-7C-C5" Calling-Station-Id = "00-1A-4B-63-69-0B" Service-Type = Framed-User Framed-MTU = 1500 State = 0xe5811fdbe68506df807df3f78bad2b67 EAP-Message = 0x020400061900 Message-Authenticator = 0xc59a1a2d0cfb101ec430dad4e10897b6 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.2/auth-detail-20101107 [auth_log] expand: %t -> Sun Nov 7 11:36:33 2010 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "FIRMA1" for User-Name = "FIRMA1\usera" [ntdomain] Found realm "FIRMA1" [ntdomain] Adding Stripped-User-Name = "usera" [ntdomain] Adding Realm = "FIRMA1" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 47 to 192.168.0.2 port 1812 EAP-Message = 0x010500061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5811fdbe18406df807df3f78bad2b67 Finished request 46. Going to the next request Waking up in 4.9 seconds. Cleaning up request 42 ID 43 with timestamp +2802 Cleaning up request 43 ID 44 with timestamp +2802 Cleaning up request 44 ID 45 with timestamp +2802 Cleaning up request 45 ID 46 with timestamp +2802 Cleaning up request 46 ID 47 with timestamp +2802 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-doesn-t-work-anymore… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

Re: PEAP w/ freeradius to LDAP storing ntPassword not working - resolved
by schilling 07 Nov '10

07 Nov '10

I am able to have peap/mschpv2 work with ldap nt hash. radtest -t mschap will not work for peap/mschapv2, the real windows supplicant, wireless access point will work. The format in ldap is not relevant, w/ or w/o the preceding 0x will work. The configuration I changed from default are the following clients.conf to add testing AP ip and secret eap.conf to add the real certificate thing etc. modules/ldap to add the ldap proxy account information. site-enabled/inner-tunnel - uncomment the ldap line in authorize authorize { # # The ldap module will set Auth-Type to LDAP if it has not # already been set ldap } Now whenever I try to have a virtual server for another instance, then it will have the same error as before. Then I copied the site-enabled/default content and put them within the virtual server, it's working again. I then try to reduce to the minimum necessary configuration, the following is for the virtual server to work server ldap_ntpassword_1814 { listen { type = auth ipaddr = * port = 1814 } listen { ipaddr = * port = 1815 type = acct } authorize { eap { ok = return } } authenticate { eap } } Thanks, Schilling On Fri, Nov 5, 2010 at 7:12 AM, schilling <schilling2006(a)gmail.com> wrote: > I asked the ldap admin to change the format of the ntPassword to > prepend with 0x, now radius -X get the right hash, but it still have > no "known good" password was found in LDAP. Nevertheless, the > authorization is ok. What is the right format to put in our ldap > ntPassword attribute? Should I ignore the error and focus on the > Auth-Type error? > > I will reinstall 2.1.0 with all default, and try it again. > > Thanks, > > Schilling > > [ldap] looking for check items in directory... > [ldap] ntPassword -> NT-Password == 0x771cfdfe02a8c15e15b3e0e4974602fa > [ldap] looking for reply items in directory... > WARNING: No "known good" password was found in LDAP. Are you sure > that the user is configured correctly? > [ldap] user sding authorized to use remote access > [ldap] ldap_release_conn: Release Id: 0 > ++[ldap] returns ok > > > On Thu, Nov 4, 2010 at 11:10 PM, Alan DeKok <aland(a)deployingradius.com> wrote: >> schilling wrote: >>> Found Auth-Type = EAP >>> WARNING: Unknown value specified for Auth-Type. Cannot perform >>> requested action. >> >> You have edited the default configuration and broken it. Don't do that. >> >> Alan DeKok. >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >> >

2 3

Doubt - Freeradius + Ldap
by eduardo moreira 05 Nov '10

05 Nov '10

Hello list, Im new with freeradius, but read many about this and dont solve my problem. I have this problem with my implemention. Only appears this message with freeradius -X -x Mon Nov 1 15:04:23 2010 : Debug: rlm_eap: Ignoring EAP-Type/tls because we do not have OpenSSL support. Mon Nov 1 15:04:23 2010 : Debug: rlm_eap: Ignoring EAP-Type/ttls because we do not have OpenSSL support. Mon Nov 1 15:04:23 2010 : Debug: rlm_eap: Ignoring EAP-Type/peap because we do not have OpenSSL support. Remaind: i using debian 5.0 And when try to connect, appears this message: Mon Nov 1 15:06:10 2010 : Debug: rlm_ldap: LDAP attribute cn as RADIUS attribute Group == "eduardo" Mon Nov 1 15:06:10 2010 : Debug: rlm_ldap: looking for reply items in directory... Mon Nov 1 15:06:10 2010 : Debug: rlm_ldap: user eduardo authorized to use remote access Mon Nov 1 15:06:10 2010 : Debug: rlm_ldap: ldap_release_conn: Release Id: 0 Mon Nov 1 15:06:10 2010 : Debug: modsingle[authorize]: returned from ldap (rlm_ldap) for request 0 Mon Nov 1 15:06:10 2010 : Debug: ++[ldap] returns ok Mon Nov 1 15:06:10 2010 : Debug: modsingle[authorize]: calling eap (rlm_eap) for request 0 Mon Nov 1 15:06:10 2010 : Debug: rlm_eap: No EAP-Message, not doing EAP Mon Nov 1 15:06:10 2010 : Debug: modsingle[authorize]: returned from eap (rlm_eap) for request 0 Mon Nov 1 15:06:10 2010 : Debug: ++[eap] returns noop Mon Nov 1 15:06:10 2010 : Debug: modsingle[authorize]: calling chap (rlm_chap) for request 0 Mon Nov 1 15:06:10 2010 : Debug: modsingle[authorize]: returned from chap (rlm_chap) for request 0 Mon Nov 1 15:06:10 2010 : Debug: ++[chap] returns noop Mon Nov 1 15:06:10 2010 : Debug: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Mon Nov 1 15:06:10 2010 : Debug: !!! Replacing User-Password in config items with Cleartext-Password. !!! Mon Nov 1 15:06:10 2010 : Debug: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Mon Nov 1 15:06:10 2010 : Debug: !!! Please update your configuration so that the "known good" !!! Mon Nov 1 15:06:10 2010 : Debug: !!! clear text password is in Cleartext-Password, and not in User-Password. !!! Mon Nov 1 15:06:10 2010 : Debug: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Mon Nov 1 15:06:10 2010 : Debug: auth: type Local Mon Nov 1 15:06:10 2010 : Debug: auth: user supplied User-Password does NOT match local User-Password Mon Nov 1 15:06:10 2010 : Debug: auth: Failed to validate the user. Mon Nov 1 15:06:10 2010 : Auth: Login incorrect: [eduardo/1\320\026\305\020B)\323I\211�?\001\nx\204] (from client BrasilTelecom port 1812) Mon Nov 1 15:06:10 2010 : Debug: WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS! Mon Nov 1 15:06:10 2010 : Debug: Delaying reject of request 0 for 1 seconds I try to reinstall but no sucess. I need help for advanced. If anyone have this solution or whatever, please help me. And sorry for my bad english. Regards, Eduardo

9 16

samba version
by MONTFORD, AUSTIN 05 Nov '10

05 Nov '10

Is there a particular version of samba that runs better than others for ntlm_auth? I have a ubuntu lucid test server that authenticates wireless users fine using ntlm_auth on initial logins, but randomly it will start failing reauth attempts on laptops that have been logged in for a while. I searched through the mailing list archives and someone previously with the same problem downgraded to 3.0.30 to fix it so just curious.

1 0

20k r/s hardware requirements
by Eichinger, Rene (NSN - AT/Wien) 05 Nov '10

05 Nov '10

Hi Gurus, I need to figure out hardware requirements for a freeradius installation for ~20.000 requests per second. Is this the right place to get this information? Br, René E.

2 1

EAP proxy (documentation) issue
by Edgar Fuß 05 Nov '10

05 Nov '10

While setting up proxying for EAP, I ran into the issue that only the first packet was proxied to the home server. Fortunately, I found the explanation in the list archive that the "ok = return" line in the eap configuration section of the default virtual server leads to the files section not being considered for follow-up packets. As I'm at least the second person running into this issue, would it make sense to add a comment to the example configuration to the effect that one may want to comment out that line (or, using unlang, if-out the eap section alltogether) if one uses local EAP plus proxied EAP?

1 0

PEAP w/ freeradius to LDAP storing ntPassword not working
by schilling 05 Nov '10

05 Nov '10

Hi All, We had ntPassword hash in our ldap server, now the authentication from peap from windows computer and radtest -t mschap fail. Attached please find the full debug information. My username is sding for the testing. Thanks, [root@auth2 opt]# ./sbin/radiusd -X FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Nov 4 2010 at 13:04:32 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /opt/etc/raddb/radiusd.conf including configuration file /opt/etc/raddb/clients.conf including files in directory /opt/etc/raddb/modules/ including configuration file /opt/etc/raddb/modules/policy including configuration file /opt/etc/raddb/modules/acct_unique including configuration file /opt/etc/raddb/modules/unix including configuration file /opt/etc/raddb/modules/chap including configuration file /opt/etc/raddb/modules/preprocess including configuration file /opt/etc/raddb/modules/expiration including configuration file /opt/etc/raddb/modules/mac2vlan including configuration file /opt/etc/raddb/modules/mschap including configuration file /opt/etc/raddb/modules/ippool including configuration file /opt/etc/raddb/modules/files including configuration file /opt/etc/raddb/modules/krb5 including configuration file /opt/etc/raddb/modules/passwd including configuration file /opt/etc/raddb/modules/radutmp including configuration file /opt/etc/raddb/modules/attr_rewrite including configuration file /opt/etc/raddb/modules/echo including configuration file /opt/etc/raddb/modules/etc_group including configuration file /opt/etc/raddb/modules/pap including configuration file /opt/etc/raddb/modules/realm including configuration file /opt/etc/raddb/modules/pam including configuration file /opt/etc/raddb/modules/always including configuration file /opt/etc/raddb/modules/exec including configuration file /opt/etc/raddb/modules/logintime including configuration file /opt/etc/raddb/modules/sql_log including configuration file /opt/etc/raddb/modules/smbpasswd including configuration file /opt/etc/raddb/modules/sradutmp including configuration file /opt/etc/raddb/modules/counter including configuration file /opt/etc/raddb/modules/ldap including configuration file /opt/etc/raddb/modules/expr including configuration file /opt/etc/raddb/modules/attr_filter including configuration file /opt/etc/raddb/modules/checkval including configuration file /opt/etc/raddb/modules/digest including configuration file /opt/etc/raddb/modules/detail including configuration file /opt/etc/raddb/modules/detail.log including configuration file /opt/etc/raddb/modules/mac2ip including configuration file /opt/etc/raddb/modules/detail.example.com including configuration file /opt/etc/raddb/modules/inner-eap including configuration file /opt/etc/raddb/modules/linelog including configuration file /opt/etc/raddb/modules/otp including configuration file /opt/etc/raddb/modules/perl including configuration file /opt/etc/raddb/modules/smsotp including configuration file /opt/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /opt/etc/raddb/modules/wimax including configuration file /opt/etc/raddb/modules/cui including configuration file /opt/etc/raddb/modules/dynamic_clients including configuration file /opt/etc/raddb/modules/ntlm_auth including configuration file /opt/etc/raddb/modules/opendirectory including configuration file /opt/etc/raddb/eap.conf including configuration file /opt/etc/raddb/sql.conf including configuration file /opt/etc/raddb/sql/mysql/dialup.conf including configuration file /opt/etc/raddb/policy.conf including files in directory /opt/etc/raddb/sites-enabled/ including configuration file /opt/etc/raddb/sites-enabled/default including configuration file /opt/etc/raddb/sites-enabled/inner-tunnel including configuration file /opt/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = no } including dictionary file /opt/etc/raddb/dictionary main { prefix = "/opt" localstatedir = "/opt/var" logdir = "/var/log/radius" libdir = "/opt/lib" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/opt/var/run/radiusd/radiusd.pid" checkrad = "/opt/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client skunk { ipaddr = 128.186.33.39 require_message_authenticator = no secret = "skunked123" nastype = "other" } client dirac { ipaddr = 128.186.2.26 require_message_authenticator = no secret = "coNag85" shortname = "pfsense" nastype = "other" } client strozier { ipaddr = 128.186.255.62 require_message_authenticator = no secret = "cisco" shortname = "pfsense" nastype = "other" } client nagios { ipaddr = 128.186.33.19 require_message_authenticator = no secret = "coNag03" shortname = "nagios" nastype = "other" } client aruba { ipaddr = 128.186.255.0 netmask = 24 require_message_authenticator = no secret = "PBFD86wE!" } client xirrus-corelab { ipaddr = 128.186.252.11 require_message_authenticator = no secret = "cisco" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /opt/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /opt/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /opt/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /opt/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server ldap_sql_1900 { # from file /opt/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /opt/etc/raddb/modules/ldap ldap { server = "mds.fsu.edu" port = 389 password = "y0dayad0" identity = "cn=radius-proxy,ou=proxy-users,dc=fsu,dc=edu" net_timeout = 10 timeout = 20 timelimit = 20 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = yes require_cert = "allow" } basedn = "dc=fsu,dc=edu" filter = "(&(uid=%u)(!(uid=lib-guest*)))" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/opt/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /opt/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0xa073798 Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /opt/etc/raddb/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "3306" login = "radusr" password = "x09r24x" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radusr@localhost:3306/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 } # modules } # server server ldap_ntpassword_1814 { # from file /opt/etc/raddb/radiusd.conf modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /opt/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/opt/etc/raddb/certs/server.pem" certificate_file = "/opt/etc/raddb/certs/server.pem" CA_file = "/opt/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/opt/etc/raddb/certs/dh" random_file = "/opt/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/opt/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /opt/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } } # modules } # server server inner-tunnel { # from file /opt/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /opt/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /opt/etc/raddb/modules/chap Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /opt/etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /opt/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /opt/etc/raddb/modules/files files { usersfile = "/opt/etc/raddb/users" acctusersfile = "/opt/etc/raddb/acct_users" preproxy_usersfile = "/opt/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /opt/etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /opt/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/opt/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /opt/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /opt/etc/raddb/modules/preprocess preprocess { huntgroups = "/opt/etc/raddb/huntgroups" hints = "/opt/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /opt/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /opt/etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /opt/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/opt/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "control" listen { socket = "/opt/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = * port = 1900 } listen { type = "acct" ipaddr = * port = 1901 } listen { type = "auth" ipaddr = * port = 1814 } listen { type = "acct" ipaddr = * port = 1815 } Listening on command file /opt/var/run/radiusd/radiusd.sock Listening on authentication address * port 1900 as server ldap_sql_1900 Listening on accounting address * port 1901 as server ldap_sql_1900 Listening on authentication address * port 1814 as server ldap_ntpassword_1814 Listening on accounting address * port 1815 as server ldap_ntpassword_1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 35206, id=243, length=113 User-Name = "sding" NAS-IP-Address = 128.186.33.38 NAS-Port = 3 MS-CHAP-Challenge = 0x1f0a6708d52907ac MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000b521c0b0b7e69a6109b6b5a5ed5724222914a679acbb5208 server ldap_ntpassword_1814 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for sding [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=sding)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to mds.fsu.edu:389, authentication 0 [ldap] starting TLS [ldap] bind as cn=radius-proxy,ou=proxy-users,dc=fsu,dc=edu/y0dayad0 to mds.fsu.edu:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=sding)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] ntPassword -> NT-Password == 0x3737314346444645303241384331354531354233453045343937343630324641 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user sding authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok Found Auth-Type = MSCHAP WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Failed to authenticate the user. Login incorrect: [sding] (from client localhost port 3) } # server ldap_ntpassword_1814 Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.6 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 243 to 127.0.0.1 port 35206 Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 128.186.33.19 port 34350, id=103, length=52 User-Name = "gharris-test" User-Password = "3RUb8g!k" server ldap_sql_1900 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for gharris-test [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=gharris-test)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=gharris-test)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] Setting Auth-Type = LDAP [ldap] user gharris-test authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [sql] expand: %{User-Name} -> gharris-test [sql] sql_set_user escaped user --> 'gharris-test' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'gharris-test' ORDER BY id [sql] expand: SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM usergroup WHERE username = 'gharris-test' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'nagios' ORDER BY id [sql] User found in group nagios [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'nagios' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok Found Auth-Type = LDAP # Executing group from file /opt/etc/raddb/radiusd.conf +- entering group LDAP {...} [ldap] login attempt by "gharris-test" with password "3RUb8g!k" [ldap] user DN: uid=gharris-test,ou=proxy-users,dc=fsu,dc=edu [ldap] (re)connect to mds.fsu.edu:389, authentication 1 [ldap] starting TLS [ldap] bind as uid=gharris-test,ou=proxy-users,dc=fsu,dc=edu/3RUb8g!k to mds.fsu.edu:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] user gharris-test authenticated succesfully ++[ldap] returns ok Login OK: [gharris-test] (from client nagios port 0) WARNING: Empty post-auth section. Using default return values. } # server ldap_sql_1900 Sending Access-Accept of id 103 to 128.186.33.19 port 34350 Reply-Message = "Nagios" Finished request 1. Going to the next request Waking up in 1.2 seconds. Cleaning up request 0 ID 243 with timestamp +77 Waking up in 3.7 seconds. Cleaning up request 1 ID 103 with timestamp +82 Ready to process requests. rad_recv: Access-Request packet from host 128.186.252.11 port 32800, id=16, length=166 User-Name = "sding" NAS-IP-Address = 128.186.252.11 NAS-Identifier = "skunk" NAS-Port = 129 Called-Station-Id = "00-0F-7D-04-CC-92:fsusecurem" Calling-Station-Id = "00-12-F0-71-28-BF" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 1Mbps/1Mbps 802.11b" EAP-Message = 0x022e000a017364696e67 Message-Authenticator = 0xc4ac1736151ee0a367c9de7e872c7277 server ldap_ntpassword_1814 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for sding [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=sding)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=sding)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] ntPassword -> NT-Password == 0x3737314346444645303241384331354531354233453045343937343630324641 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user sding authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] EAP packet type response id 46 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[mschap] returns noop Found Auth-Type = EAP WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Failed to authenticate the user. Login incorrect: [sding] (from client xirrus-corelab port 129 cli 00-12-F0-71-28-BF) } # server ldap_ntpassword_1814 Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 16 to 128.186.252.11 port 32800 Waking up in 4.9 seconds. Cleaning up request 2 ID 16 with timestamp +296 Ready to process requests. rad_recv: Access-Request packet from host 128.186.252.11 port 32800, id=17, length=166 User-Name = "sding" NAS-IP-Address = 128.186.252.11 NAS-Identifier = "skunk" NAS-Port = 897 Called-Station-Id = "00-0F-7D-04-CC-72:fsusecurem" Calling-Station-Id = "00-12-F0-71-28-BF" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 1Mbps/1Mbps 802.11b" EAP-Message = 0x0201000a017364696e67 Message-Authenticator = 0x29b1d739baadd00109d652aeaf7c00a5 server ldap_ntpassword_1814 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for sding [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=sding)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=sding)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] ntPassword -> NT-Password == 0x3737314346444645303241384331354531354233453045343937343630324641 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user sding authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] EAP packet type response id 1 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[mschap] returns noop Found Auth-Type = EAP WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Failed to authenticate the user. Login incorrect: [sding] (from client xirrus-corelab port 897 cli 00-12-F0-71-28-BF) } # server ldap_ntpassword_1814 Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 17 to 128.186.252.11 port 32800 Waking up in 4.9 seconds. Cleaning up request 3 ID 17 with timestamp +302 Ready to process requests. rad_recv: Access-Request packet from host 128.186.252.11 port 32800, id=18, length=166 User-Name = "sding" NAS-IP-Address = 128.186.252.11 NAS-Identifier = "skunk" NAS-Port = 257 Called-Station-Id = "00-0F-7D-04-CC-A2:fsusecurem" Calling-Station-Id = "00-12-F0-71-28-BF" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" EAP-Message = 0x0201000a017364696e67 Message-Authenticator = 0xe8e33eac97c59c3ab711950fb4909d7d server ldap_ntpassword_1814 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for sding [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=sding)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=sding)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] ntPassword -> NT-Password == 0x3737314346444645303241384331354531354233453045343937343630324641 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user sding authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] EAP packet type response id 1 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[mschap] returns noop Found Auth-Type = EAP WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Failed to authenticate the user. Login incorrect: [sding] (from client xirrus-corelab port 257 cli 00-12-F0-71-28-BF) } # server ldap_ntpassword_1814 Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 4 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 4 Sending Access-Reject of id 18 to 128.186.252.11 port 32800 Waking up in 4.9 seconds. Cleaning up request 4 ID 18 with timestamp +310 Ready to process requests. rad_recv: Access-Request packet from host 128.186.252.11 port 32800, id=19, length=166 User-Name = "sding" NAS-IP-Address = 128.186.252.11 NAS-Identifier = "skunk" NAS-Port = 513 Called-Station-Id = "00-0F-7D-04-CC-42:fsusecurem" Calling-Station-Id = "00-12-F0-71-28-BF" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" EAP-Message = 0x0201000a017364696e67 Message-Authenticator = 0x7e99041266eb9c68719e3faa49fbfcf0 server ldap_ntpassword_1814 { # Executing section authorize from file /opt/etc/raddb/radiusd.conf +- entering group authorize {...} [ldap] performing user authorization for sding [ldap] expand: (&(uid=%u)(!(uid=lib-guest*))) -> (&(uid=sding)(!(uid=lib-guest*))) [ldap] expand: dc=fsu,dc=edu -> dc=fsu,dc=edu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fsu,dc=edu, with filter (&(uid=sding)(!(uid=lib-guest*))) [ldap] looking for check items in directory... [ldap] ntPassword -> NT-Password == 0x3737314346444645303241384331354531354233453045343937343630324641 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user sding authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] EAP packet type response id 1 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[mschap] returns noop Found Auth-Type = EAP WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Failed to authenticate the user. Login incorrect: [sding] (from client xirrus-corelab port 513 cli 00-12-F0-71-28-BF) } # server ldap_ntpassword_1814 Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 5 Sending Access-Reject of id 19 to 128.186.252.11 port 32800 Waking up in 4.9 seconds.

2 3