- Freeradius-Users - lists.freeradius.org

MS-CHAP failing?
by Mark Holmes 12 Oct '10

12 Oct '10

OK, getting somewhere, but still won't let me connect. I can't see in the debug output why it fails. I'm trying to authenticate against AD, using PEAP-MSCHAPv2 I have checked ntlm_auth is working by ntlm_auth --request-nt-key --domain=MYDOMAIN --username=testuser --password=password and I get (NT_STATUS_OK) my /modules/ntlm_auth looks like this:- exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" } and modules/mschap looks like this ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-NUFFIELDCOLLEGE} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response$ } In the debug output I can see this - should authentication realm = LOCAL as below? [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. When I paste the debug into the checker it highlights this:- [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. But not sure I need to worry about that as I'm not doing PAP Can't see anything else in there indicating a problem, but when I try to connect a device (my iPhone) it just returns a 'cannot connect to' message What am I missing? No doubt something obvious.... Debug output ------------ FreeRADIUS Version 2.1.7, for host i686-redhat-linux-gnu, built on Mar 31 2010 at 00:25:31 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm mydomain.ox.ac.uk { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.30.1 { require_message_authenticator = no secret = "6_5EsC=Vv&y$pK27" shortname = "192.168.30.1" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN} --challenge=%{mschap:Challenge:-00} " } Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=0, length=226 Message-Authenticator = 0x23034f1c4e3f45f152d1c4fb279f8f73 Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200001901686f6c6d6573406e7566662e6f782e61632e756b NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 25 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.30.1 port 1160 EAP-Message = 0x0101001604100d3dfd867b801639e3c581bfcdcfaf13 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236936ea7140d04af0873965b7 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=1, length=225 Message-Authenticator = 0x6cca649f78174a259d2c601dd67257ed Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236936ea7140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.30.1 port 1160 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236835f77140d04af0873965b7 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=2, length=355 Message-Authenticator = 0x5736800352fb2d51bdf61a2734312f8a Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236835f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202008819800000007e16030100790100007503014cb45b46608d363ac5c8d26e33dd43898b655a06cfdf1574be1a913ac88c202300003ac00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a0009000300080033003900160015001401000012000a00080006001700180019000b00020100 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 136 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 126 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0079], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.30.1 port 1160 EAP-Message = 0x0103040019c00000089b160301002a0200002603014cb45afd189372e4b4f769dceeb3dd3b4c12aae9755f82d1f38514c1fbc92a4b00002f00160301085e0b00085a0008570003a6308203a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236b34f77140d04af0873965b7 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=3, length=225 Message-Authenticator = 0x2576586942c102d3255acbf7f9e7551e Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236b34f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.30.1 port 1160 EAP-Message = 0x010403fc194000a47119ce17378229300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3130313030383038303330305a170d3131313030383038303330305a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1829b09aaa230ef9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236a33f77140d04af0873965b7 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=4, length=225 Message-Authenticator = 0x6f2d1194ed5104fbddac935348770d23 Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236a33f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.30.1 port 1160 EAP-Message = 0x010500b519003302ce0e0fc291a6d96b7d48ee73196ba6bd4dc1f482f212668469e57b39e7a43b8911798e16f4d667a4133677ef3b262a0cefa7bb3a2f93fc41a553e1ff1d42df892e8febb86910e1836ecf18128eb24e23608b9e4e7ffb71cfd48da75a5b417362db9b375e21f7384816cdd5779000d167455a927c243356a8c2485489283a74d948616dfe29804da6c776fbef1237bfd67629668ac63328df37a16e53695de443b288c87e16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236d32f77140d04af0873965b7 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=5, length=557 Message-Authenticator = 0x3646336058803ed4629d9489a5a2024e Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236d32f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0xdd352cb41686de425e8514b1a9b629f01e4117775e2a754f14030100010116030100307cc4d403526e0aa85b56c969bea377bd4c2c1518f91751664bd178ced86e29fbb1109030b638d768e118d710e5e29ba4 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 192.168.30.1 port 1160 EAP-Message = 0x01060041190014030100010116030100300ce01663c1ce145d63c96447d3d07cf68e95c24295d97affe9bc36864795bdb88e70c74afb4355ff222162b72c963dcd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236c31f77140d04af0873965b7 Finished request 5. Going to the next request Waking up in 4.7 seconds. Cleaning up request 0 ID 0 with timestamp +5 Cleaning up request 1 ID 1 with timestamp +5 Cleaning up request 2 ID 2 with timestamp +5 Cleaning up request 3 ID 3 with timestamp +5 Cleaning up request 4 ID 4 with timestamp +5 Cleaning up request 5 ID 5 with timestamp +5 Ready to process requests. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=0, length=226 Message-Authenticator = 0x14baebdd1574b1ac2231ae94c3cf4706 Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200001901686f6c6d6573406e7566662e6f782e61632e756b NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 25 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.30.1 port 1162 EAP-Message = 0x0101001604102922a8dc5552088852ca5c41f1c42f06 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbc7ff83c4bf33c60bc849290 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=1, length=225 Message-Authenticator = 0xc2a17c9f5948eec45c5759a39cfa444c Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbc7ff83c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.30.1 port 1162 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbd7ce53c4bf33c60bc849290 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=2, length=355 Message-Authenticator = 0x18edcd6024ca02642f216f90a64303fd Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbd7ce53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202008819800000007e16030100790100007503014cb45b53574671267b35847b4edcbfd00fcb35f11867fa6fa24c9d9642f0079e00003ac00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a0009000300080033003900160015001401000012000a00080006001700180019000b00020100 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 136 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 126 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0079], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.30.1 port 1162 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbe7de53c4bf33c60bc849290 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=3, length=225 Message-Authenticator = 0xd4fa27a8f72667781057ca14f3ab7325 Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbe7de53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.30.1 port 1162 EAP-Message = 0x010403fc194000a47119ce17378229300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3130313030383038303330305a170d3131313030383038303330305a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1829b09aaa230ef9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbf7ae53c4bf33c60bc849290 Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=4, length=225 Message-Authenticator = 0x453af3751e3ce2f19be665f372db070d Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbf7ae53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.30.1 port 1162 EAP-Message = 0x010500b519003302ce0e0fc291a6d96b7d48ee73196ba6bd4dc1f482f212668469e57b39e7a43b8911798e16f4d667a4133677ef3b262a0cefa7bb3a2f93fc41a553e1ff1d42df892e8febb86910e1836ecf18128eb24e23608b9e4e7ffb71cfd48da75a5b417362db9b375e21f7384816cdd5779000d167455a927c243356a8c2485489283a74d948616dfe29804da6c776fbef1237bfd67629668ac63328df37a16e53695de443b288c87e16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cb87be53c4bf33c60bc849290 Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=5, length=557 Message-Authenticator = 0xcf284b18d28ce752c4a6ffb4e0bae462 Service-Type = Framed-User User-Name = "testuser(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cb87be53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0xca7e829ea010e9d664e7c3e8b22af4c5fa52a2ede114d436140301000101160301003082a7be7954291d4b5bf4735bb7757cbed2bd3086b51787f2870687d805cb7cf95090372f84d310b781705367239e2fa2 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser(a)mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 192.168.30.1 port 1162 EAP-Message = 0x0106004119001403010001011603010030f615a58846d51361b77eab5683e34a0a744f3af094b2c5478a0a1042f89c4f48d3f71abaae4bd259922300d95ae0bfb4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cb978e53c4bf33c60bc849290 Finished request 11. Going to the next request Waking up in 4.7 seconds. Cleaning up request 6 ID 0 with timestamp +18 Cleaning up request 7 ID 1 with timestamp +18 Cleaning up request 8 ID 2 with timestamp +18 Cleaning up request 9 ID 3 with timestamp +18 Cleaning up request 10 ID 4 with timestamp +18 Cleaning up request 11 ID 5 with timestamp +19 Ready to process requests.

3 4

Disconnect-Request
by Moayad Mohammad 12 Oct '10

12 Oct '10

Dears, Can I disconnect connected user or session form freeradius and Wichorus ASN-GW (WIMAX)? If yes how? Am trying to send disconnect request as follow: (Note: I changed all the following values as needed) # echo "Acct-Session-Id=D91FE8E51802097" > packet.txt # echo "User-Name=somebody" >> packet.txt # echo "NAS-IP-Address=10.0.0.1" >> packet.txt # cat packet.txt | radclient -x 10.0.0.1:3799 disconnect secret Sending Disconnect-Request of id 116 to 10.0.0.1 port 3799 Acct-Session-Id = " D91FE8E51802097" User-Name = "somebody" NAS-IP-Address = 10.0.0.1 rad_recv: Disconnect-NAK packet from host 10.0.0.1 port 3799, id=116, length=32 Event-Timestamp = "Oct 12 2010 16:08:21 EEST" Error-Cause = Session-Context-Not-Found When I changed the port to 1813 I got the following error: Sending Disconnect-Request of id 26 to 10.0.0.1 port 1812 Acct-Session-Id = " D91FE8E51802097" User-Name = "somebody" NAS-IP-Address = 10.0.0.1 Sending Disconnect-Request of id 26 to 10.0.0.1 port 1812 Acct-Session-Id = " D91FE8E51802097" User-Name = "somebody" NAS-IP-Address = 10.0.0.1 Sending Disconnect-Request of id 26 to 10.0.0.1 port 1812 Acct-Session-Id = " D91FE8E51802097" User-Name = "somebody" NAS-IP-Address = 10.0.0.1 radclient: no response from server for ID 26 socket 3 Regards, Moayad

3 2

Default behavior for users not in any group
by Maxim S. Denisov 12 Oct '10

12 Oct '10

Hello. I have freeradius 2.1.6 with rlm_sql_oracle. There is a plenty of users in radcheck table and several of them are a members of a group. As stated in comments in the dialup.conf all other users are a members of the group DEFAULT if I understood it right. I put the fields DEFAULT Auth-Type := Reject in the radgroupcheck table but it seems that radius doesn't process the group checks if there is no explict group record for the user in radusergroup table even if I set read_groups. The radius accepts the requests if the username and password matches. How can I reject users not stated in the group without explictly assigning them to the DEFAULT group in radusergroup? Regards, Maxim S. Denisov

2 2

RE: Problem with MSCHAP
by Mark Holmes 12 Oct '10

12 Oct '10

OK, Just to recap, I'm working on setting Freeradius up to authenticate users to our wireless network. We want to use PEAP-MSCHAPv2 and authenticate against Active Directory. I'm using samba and ntlm_auth. Versions:freeradius2-2.1.7-7.el5 and samba3.0.33-3.29 Needless to say it's failing. I set the mydomain.ox.ac.uk realm in proxy.conf as someone on here suggested on Friday, and that has cleared up the warning about unknown realms. When connecting, I still get several errors before auth fails. I've pasted my debug output into the web tool and it picks out the following in red security { max_attributes = 200 reject_delay = 1 (This line in red) status_server = yes } (all in red) Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. (In yellow) I also see (not highlighted) that I'm still getting [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for holmes(a)mydomain.ox.ac.uk with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect I have configured modules/mschap to use ntlm_auth as follows ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Am I missing something in the MSCHAP config? Cheers, Mark

2 3

SQL query error; rejecting user
by Daniel Sandulescu 12 Oct '10

12 Oct '10

Hello! I got a erroarea following logging and do not know where to look. Can someone ajunte me? rad_recv: Access-Request packet from host 127.0.0.1:42096, id=227, length=116 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "phlander" CHAP-Challenge = 0x153961bc09eaeddf1226af8d60538ee6819b24ede1c1 CHAP-Password = 0xacf1701244e94be1dffe4e11ee08f0caa4 Calling-Station-Id = "00:42:15:11:24:57" NAS-IP-Address = 10.0.0.1 NAS-Port = 0 rad_lowerpair: User-Name now 'phlander' rad_rmspace_pair: User-Name now 'phlander' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 radius_xlat: '' rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): SQL query error; rejecting user rlm_sql (sql): Released sql socket id: 3 modcall[authorize]: module "sql" returns fail for request 0 modcall: group authorize returns fail for request 0 There was no response configured: rejecting request 0 Server rejecting request 0. Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 227 to 127.0.0.1:42096 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 227 with timestamp 4cb2ee7d Nothing to do. Sleeping until we see a request.

4 14

Store Access-Request packet information in database
by c.schwarz＠funknetz.at 11 Oct '10

11 Oct '10

Hi, I would like to achieve some kind of a tracking system for 802.11 wireless clients, therefore every login attempt should be accepted and the necessary information (e.g. nas-ip-address, calling-station-id) should be stored in an extra database table. Example output: rad_recv: Access-Request packet from host 192.168.30.216 port 43128, id=5, length=200 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00:1A:73:59:25:4B" Called-Station-Id = "hotspot1" NAS-Port-Id = "wlan1" User-Name = "christoph" NAS-Port = 2152726535 Acct-Session-Id = "80500007" Framed-IP-Address = 10.50.0.254 Mikrotik-Host-IP = 10.50.0.254 CHAP-Challenge = 0x12321805f00ad380736bd946aefe0389 CHAP-Password = 0x1153fcb1c99609b962baa8042aca266905 Service-Type = Login-User WISPr-Logoff-URL = "http://10.50.0.1/logout" NAS-Identifier = "test-loop21" NAS-IP-Address = 192.168.30.216 Does anybody have an idea how to store this kind of information when freeradius receives an access-request packet? Thanks in advance Chris

2 1

Re: Problem with Alcatel 4604 and Cisco ACS
by matteo＠crs4.it 10 Oct '10

10 Oct '10

Hello, Am I right if I use attr_rewrite module to solve my problem? Thanks a lot ------------------------------- On 10/07/2010 10:11 AM, Johan Meiring wrote: [Hide Quoted Text] On 2010/10/07 10:01 AM, matteo wrote: Hello, I'm in trouble trying to authenticate a client connecting to an Alcatel 4604 (Aruba device) to a Cisco ACS, because my alcatel send as Called-Station-Id value its mac-address. On the Cisco side, this value correspond to the SSID value, while this attribute on Alcatel is send via Aruba-Essid-Name (attribute 5 in dictionary.aruba). Is there a way to change this behavior or a remap of this attribute for Alcatel? ---------------------------------- Where is Freeradius involved? --------------------------------------- My freeradius 2.1.x is proxying requests for a realm managed by the ACS Thanks ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

1 0

Clear text password not available
by Daniel Sandulescu 09 Oct '10

09 Oct '10

Hi ! Login incorrect (rlm_chap: Clear text password not available): [phlander/<CHAP-Password>] Does anyone know where to change? Tks!

3 4

Question about NAS-Port attribute when using freeradiusclient
by Ali Majdzadeh 08 Oct '10

08 Oct '10

Hello All I am using freeradiusclient in combination with PPP in order to setup RADIUS authentication for PPTP users. Actually, I managed to authenticate users using RADIUS but I noticed that the NAS-Port attribute which is sent to RADIUS server is always 0. Is this normal? Is there any way to generate proper values for NAS-Port? Is this attribute set by radiusclient or is it extracted from somewhere else? (PPP, maybe?) Warm Regards Ali Majdzadeh Kohbanani

2 4

Problem with MSCHAP
by Mark Holmes 08 Oct '10

08 Oct '10

This is my first post to this list, so first of all, hi! I'm new to freeradius, I'm working on setting it up to authenticate users to our wireless network. We want to use PEAP-MSCHAPv2 and authenticate against Active Directory. I'm using samba and ntlm_auth. Versions:freeradius2-2.1.7-7.el5 and samba3.0.33-3.29 I have the ntlm_auth part working in as far as I can put DEFAULT Auth-Type = ntlm_auth in users and then do radtest user password localhost 0 testing123 and I see the server returns Access-Accept. I then configure MS-CHAP, removing the DEFAULT Auth-Type from users and editing modules/mschap as follows ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" and set up a wireless access point up to, add it to clients and have it point at the radius server Now when I try to connect I get Access-Reject - I've tried a couple of devices - an iPhone and a Win XP machine. Output from radius -X at the bottom of this message. The bit that looks relevant to me is ++[mschap] returns noop Which I guess indicates a problem with mschap somewhere Also [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "firstname.lastname(a)mydomain.ox.ac.uk" [suffix] No such realm "mydomain.ox.ac.uk" However I'm not sure I need to worry about that bit - at the moment this is just a single, stand alone RADIUS server so I'm not sure I need to worry about realms or do I?.... Not sure where to go from here - are there some basic things I should check? I haven't included my conf files in this post but happy to do so if required. Any advice/hints much appreciated as to how I should look to troubleshoot this. Thanks, Mark Output from -X Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 192.168.1.10 port 1286, id=39, length=267 Message-Authenticator = 0x2e5d3be1821aead988b3d37cba9afd08 Service-Type = Framed-User User-Name = "firstname.lastname(a)mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x0f85e60107a2ffd7a9724559c0c7d131 Called-Station-Id = "00-24-73-54-22-C2:Test-WLAN" Calling-Station-Id = "78-E4-00-B2-E2-D5" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0227002b1900170301002067b2b3a9663cb4262b845b709b8619eb1d6ae803961cb66e52227722f3d8e496 NAS-IP-Address = 192.168.1.10 NAS-Port = 4 NAS-Port-Id = "STA port # 4" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "firstname.lastname(a)mydomain.ox.ac.uk" [suffix] No such realm "mydomain.ox.ac.uk" ++[suffix] returns noop [eap] EAP packet type response id 39 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> firstname.lastname(a)mydomain.ox.ac.uk attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 99 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 99 Sending Access-Reject of id 39 to 192.168.1.10 port 1286 EAP-Message = 0x04270004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. Cleaning up request 90 ID 30 with timestamp +1733 Cleaning up request 91 ID 31 with timestamp +1733 Cleaning up request 92 ID 32 with timestamp +1733 Cleaning up request 93 ID 33 with timestamp +1733 Cleaning up request 94 ID 34 with timestamp +1733 Cleaning up request 95 ID 35 with timestamp +1733 Cleaning up request 96 ID 36 with timestamp +1733 Cleaning up request 97 ID 37 with timestamp +1733 Cleaning up request 98 ID 38 with timestamp +1733 Waking up in 0.9 seconds. Cleaning up request 99 ID 39 with timestamp +1733 Ready to process requests.

5 6