- Freeradius-Users - lists.freeradius.org

problems with dynamic vlan assignment
by Eric Doutreleau 16 Sep '10

16 Sep '10

Hi i m using freeradius 2.1.9 and i have some problems with making dynamic vlan assignment based on vlan. here what i have in my users file DEFAULT User-Category == "student" Reply-Message = "Your a member of the student Group", Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 902, Fall-Through = No DEFAULT User-Category == "employee" Reply-Message = "Your a member of the employee Group", Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 903, Fall-Through = No But as you can see in the following debug file my user is authenticated his radius item User-Category is employee but he never get the attributes of vlan in the request i should have miss somzthing in the config but i really don't know what it would if someone could help it would be nice of him thanks in advance Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=0, length=156 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001d01616e6f6e796d6f75734069742d73756470617269732e6575 Message-Authenticator = 0x655a4cf276129e501708baa724ba2f45 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 29 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 157.159.21.100 port 54360 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248cad3dbc77d62ac2477a6a4d7 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=1, length=267 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0201007a198000000070160301006b0100006703014c913a474dd515c94c7a11b6c82fb05b485f0fb7ad9e99eea7d57dae2727462b00003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100000400230000 State = 0xcad2c248cad3dbc77d62ac2477a6a4d7 Message-Authenticator = 0x82417f0f4dca6902ac81a953b6b49945 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 112 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0501], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 1 to 157.159.21.100 port 54360 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x746572656e612e6f72672f544552454e4153534c43412e637274302606082b06010505073001861a687474703a2f2f6f6373702e7463732e746572656e612e6f72673081f60603551d110481ee3081eb82157261646975732e69742d73756470617269732e65758213617574682e69742d73756470617269732e65758212617574682e74656c65636f6d2d656d2e65758218617574682e74656c65636f6d2d73756470617269732e65758216656475726f616d2e69742d73756470617269732e65758215656475726f616d2e74656c65636f6d2d656d2e6575821b656475726f616d2e74656c65636f6d2d73756470617269732e657582157261646669 EAP-Message = 0x6c7475782e696e742d657672 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248cbd0dbc77d62ac2477a6a4d7 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=2, length=151 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0xcad2c248cbd0dbc77d62ac2477a6a4d7 Message-Authenticator = 0xe739f49b077f5fe66833b1c06c6aa246 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 157.159.21.100 port 54360 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x66ecbe55ed6ba388aa4899548001a777f0a2faf056dafd96c46f2cec581c53c34dea87dc6dc8b2b67c871891044e2a8ab8e88e58b4126c59bb62f1085c1c332fbb3750970f7dd208c76cd69cf7a2fcd413fa55b091960d5c14d91f9dbd046353a4bc00804f3b061d2054dd3a82a28085b92cb1815b48323acdd863da4d6bd13014d7013e044a5a88feaa98d886d6d9619054c15f7e8b3d3dbc7d556f259b17993cc9834875223555107d0e3292f6b21a8e3f0072fadda38d5b644eba9a34e942b81a036e747875f369a9de4dad45b5c86a212ff6b8b11ba553c6317b17bc74c807a8635a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248c8d1dbc77d62ac2477a6a4d7 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=3, length=353 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300d01980000000c616030100861000008200801514cc8cef421b9251bf1f6f7c646d816d5b2254643002e1daba2843c2d9dbe6bebf083ab05ffbfc72928ad595a9ac8bba8e8265abfb5dcd92cadbcad419ada21df214eebc010828408f5000258dd841343c4f056d0135b7f4155368a7a71ee4a5d4f7ef974084404ccce579a2d04a6c59c5dc0944eedce2f45279c6739a927514030100010116030100304fcfcb5a0aaa9d0205a9a8a007488ffd1ca740968a757ec27fe5f91290ac662df2628e3545cdc6f8b91978a18c58799b State = 0xcad2c248c8d1dbc77d62ac2477a6a4d7 Message-Authenticator = 0x1cc3c284b278964dbab9cd7ad5709711 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 157.159.21.100 port 54360 EAP-Message = 0x0104004119001403010001011603010030482e3d1d05e8d58e4731a13bd683be33e5acb5d9407e5c200cdb7ee466c7d7a97a798b9ff29acef48814300adfc28d76 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248c9d6dbc77d62ac2477a6a4d7 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=4, length=151 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061900 State = 0xcad2c248c9d6dbc77d62ac2477a6a4d7 Message-Authenticator = 0xab8b466de748a32884881aedd0cf14ef +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 4 to 157.159.21.100 port 54360 EAP-Message = 0x0105002b19001703010020b2fd227a527903cc82e50d617a832244f7311b1458336ee185e9d8ee80aa6253 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248ced7dbc77d62ac2477a6a4d7 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=5, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020500501900170301002002602c7db9a8fef22b9476f78b9034f00ec1aa4a84ffd12bb66b175278593b6f1703010020da03a9cf77e5f9050a0ef374989e7dcd54d8a8b3f7e8df59f2d13889f7397836 State = 0xcad2c248ced7dbc77d62ac2477a6a4d7 Message-Authenticator = 0x7d1bb565a68021a8e14e1b76d6e05d4e +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - doutrele [peap] Got tunneled request EAP-Message = 0x0205000d01646f757472656c65 server { PEAP: Got tunneled identity of doutrele PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x0205000d01646f757472656c65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 5 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldapdev.int-evry.fr:389, authentication 0 [ldap] bind as cn=admin,dc=int-evry,dc=fr/admldap to ldapdev.int-evry.fr:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 User-Category = "employee" EAP-Message = 0x010600221a0106001d10772702eafa9c1ba832502c45eff3eb34646f757472656c65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd5ae7b1bd5cfd560e8d64f9174929bb [peap] Got tunneled reply RADIUS code 11 User-Category = "employee" EAP-Message = 0x010600221a0106001d10772702eafa9c1ba832502c45eff3eb34646f757472656c65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd5ae7b1bd5cfd560e8d64f9174929bb [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 5 to 157.159.21.100 port 54360 EAP-Message = 0x0106004b190017030100400c86e6dc207e2cc7603991c7a1ca4e9e4c93e74004010a6fb62efdaec1e55783fef484c83973c964c31d5ee8d31d773625345fab5aa74c4f53c6becd0f1dcbcf Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248cfd4dbc77d62ac2477a6a4d7 Finished request 5. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=6, length=289 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0206009019001703010020c49c71ba6a0ad62564b8a94ee33c3233374ee4e20affb6377e64d687bbc939b11703010060248cc1e2e0c15c8f8cc4500d3de900956d807d60cf18be6450c81a1998f59938229ed4130b8b70b590d382f72420941d775beb2d95db65aeb961c0e5b936fc801a7d6aa5ed180878c2f6f34cc69538fe90c72b9f40085fdcf23881d2201c2112 State = 0xcad2c248cfd4dbc77d62ac2477a6a4d7 Message-Authenticator = 0x748598f4105e6fd40ff0f2d220aa3eb9 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 6 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020600431a0206003e31ad80725308b05eb4b1a1c08cf773d7600000000000000000e09cf3637ec00ccc4fb3fc2ed07bdd7e96e434c654ebaf3a00646f757472656c65 server { PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x020600431a0206003e31ad80725308b05eb4b1a1c08cf773d7600000000000000000e09cf3637ec00ccc4fb3fc2ed07bdd7e96e434c654ebaf3a00646f757472656c65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" State = 0xbd5ae7b1bd5cfd560e8d64f9174929bb server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 6 length 67 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Found LM-Password [mschap] Found NT-Password [mschap] Told to do MS-CHAPv2 for doutrele with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 User-Category = "employee" EAP-Message = 0x010700331a0306002e533d37424233333344414638344334353234373345434636363634343638453932333837444536463846 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd5ae7b1bc5dfd560e8d64f9174929bb [peap] Got tunneled reply RADIUS code 11 User-Category = "employee" EAP-Message = 0x010700331a0306002e533d37424233333344414638344334353234373345434636363634343638453932333837444536463846 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbd5ae7b1bc5dfd560e8d64f9174929bb [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 6 to 157.159.21.100 port 54360 EAP-Message = 0x0107005b19001703010050ec249a0c4d32e6def6e9aeb3357a17a1d09b28cc525ab8723d6a2ae20fd7066a17d11f6659d0806edeea86ed0f931d84abdc0b63571700eada94ce21112c405cdbf3505898e13ac6648737fe3a98faf4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248ccd5dbc77d62ac2477a6a4d7 Finished request 6. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=7, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0207005019001703010020dd3585a2fd072451d06cbff7c672598a7828eeb3ca9906009627abdd66e07bee170301002065a6b4951d3a3c4bf66102b8d2cded42880a5980ccbc9f6876b82f9d4b5f4c57 State = 0xcad2c248ccd5dbc77d62ac2477a6a4d7 Message-Authenticator = 0x0198edb8c100054204965aff380de732 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 7 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020700061a03 server { PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x020700061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" State = 0xbd5ae7b1bc5dfd560e8d64f9174929bb server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 7 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[files] returns noop } # server inner-tunnel [peap] Got tunneled reply code 2 User-Category = "employee" EAP-Message = 0x03070004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "doutrele" [peap] Got tunneled reply RADIUS code 2 User-Category = "employee" EAP-Message = 0x03070004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "doutrele" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 7 to 157.159.21.100 port 54360 EAP-Message = 0x0108002b19001703010020929b1abc3e1705cbf933e7e801a5354ae3a6f3399037480a464f2a2550b98f7f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcad2c248cddadbc77d62ac2477a6a4d7 Finished request 7. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=8, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02080050190017030100207ec1199edf4cf1834a3e8e7a858fff1a28c3ce3cf2b04ac072813cc2f3c90f67170301002030bcc0f7c0addcc364b1dbef6349769ec9e4200c23e3092502c65ec6c64f3ab4 State = 0xcad2c248cddadbc77d62ac2477a6a4d7 Message-Authenticator = 0x356e2d5f5a5a58689d1111a18270f65a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 8 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 8 to 157.159.21.100 port 54360 MS-MPPE-Recv-Key = 0x22d62fec650e593576a03a40cbcad77e540cdd3ba53b4a757d5c469cb40d1d15 MS-MPPE-Send-Key = 0xc1d6f7b5504b2595ce899f1cb2e0abfb68fe5224695c9d3b7157cdd5727ed058 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "anonymous" Finished request 8. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=9, length=156 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001d01616e6f6e796d6f75734069742d73756470617269732e6575 Message-Authenticator = 0x209c9f1654d33cc3294474a7f994cfb7 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 29 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 9 to 157.159.21.100 port 54360 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd268740823ac0ee159d033676 Finished request 9. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=10, length=267 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0201007a198000000070160301006b0100006703014c913a477d4a75e0cddafcb5987734716c23a52fbbbcb4ba3c65ede4ef78fee800003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100000400230000 State = 0x268659fd268740823ac0ee159d033676 Message-Authenticator = 0x1a5b6f8f646acb964649c60dd57e8503 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 112 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0501], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 10 to 157.159.21.100 port 54360 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x746572656e612e6f72672f544552454e4153534c43412e637274302606082b06010505073001861a687474703a2f2f6f6373702e7463732e746572656e612e6f72673081f60603551d110481ee3081eb82157261646975732e69742d73756470617269732e65758213617574682e69742d73756470617269732e65758212617574682e74656c65636f6d2d656d2e65758218617574682e74656c65636f6d2d73756470617269732e65758216656475726f616d2e69742d73756470617269732e65758215656475726f616d2e74656c65636f6d2d656d2e6575821b656475726f616d2e74656c65636f6d2d73756470617269732e657582157261646669 EAP-Message = 0x6c7475782e696e742d657672 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd278440823ac0ee159d033676 Finished request 10. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=11, length=151 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0x268659fd278440823ac0ee159d033676 Message-Authenticator = 0x67328520e6fdbf6163942511315364f2 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 11 to 157.159.21.100 port 54360 EAP-Message = 0x010302e71900792e6672821872616466696c7475782e69742d73756470617269732e657582127261646975732e696e742d657672792e6672300d06092a864886f70d01010505000382010100981110a5a967ab5239ad83c6cc8a052e076b549711efbfd8a1849832633cc3c1d320e78b73df288e2be7e1db2849caea0d08447cb4d6a5c861a2e8f2c522388795b9e0c0a67cf23e28e6ede9ab76d61030fe4d4728ca4a2aa009f027ee71029f0ed72a124e4b0d6d5780eedeb7366b66a944f399d040652561bb82898163a273c8cc84f00c5ff323f3eeaefbf0901d889f88250f40ec69738d14807c44a0bcc1188849cd50ca19ab2b68f9b0a20b5f9e1d EAP-Message = 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 EAP-Message = 0x357443dafae946cb8583e130e0352ebc0209678bd9615b4ea9b19c9f3300d86087c38a2e32f9ace7053804c11b9639ee62a32642357df913fad79ee9f8767d3101f039c272436c0d9fd6f0127a36bfa3f15c1f7c05e5964dc49edccbc07e430fdc86008096ff6f76a0017fcdcd2b9f49571f9329f5e2646407cd5ca2ad5a107f40fce50309a4bfd7f301bd26da8e7a287862684c06a5c5d91bf179a6652676f55f51d8303361a3b5c06acc228f0c1a88b5c8d85e159d9c769c5fe3db2c365d26ddfbe63acca015129d6d4f3441ca010c5f48e6f626e3456fd5ee90231cfd9eeb46c2996f16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd248540823ac0ee159d033676 Finished request 11. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=12, length=353 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300d01980000000c61603010086100000820080a532d539c23b716fd99967cca03ca383b4a9964c07b863f5fecfc9cb854a72e079b4d045665f5675f4dc03d8565282bad8fef82e912a5b031f148cf90234bbc92e5ffcacbbfc4d7e91477bae66bd95e22f465b530fbb0017da53cfb69b8c95da7114ad1900cab4e19e4cbcad18209735266a33114bf75efc04082f5d23239a55140301000101160301003098dc3a9750d9b3e46edeabed8465d9f021a3de531ebd757475c7720e075e003bdb6601a68070fdd3a9d24a01210a255c State = 0x268659fd248540823ac0ee159d033676 Message-Authenticator = 0xe7361cb0dcb8744cd2e3c79a1e3397e3 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 12 to 157.159.21.100 port 54360 EAP-Message = 0x01040041190014030100010116030100305434b4505f9e38783bce6ccd9077ed706c6136fb44420c636820a7462bdce7ea959c6ea9c4fb093604e78cb213722a2c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd258240823ac0ee159d033676 Finished request 12. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=13, length=151 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061900 State = 0x268659fd258240823ac0ee159d033676 Message-Authenticator = 0x71d88f3eff06b67f64686e7dd6fb475b +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 13 to 157.159.21.100 port 54360 EAP-Message = 0x0105002b19001703010020c27c36e26c7a210558ff69f8b13b888aef215bbf2ce97d69f4cb0521433b0a6d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd228340823ac0ee159d033676 Finished request 13. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=14, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020500501900170301002068a3b06ae07eae4e0dc0a06ed9af4fc0cdebf4128489b7e45bab1c7f20cf79691703010020ab74a837a52917a8caafedeae7a26271f80d3d9c97e539eddc779d2c7b0ab546 State = 0x268659fd228340823ac0ee159d033676 Message-Authenticator = 0xbc0903a9455d85bc3717e62e28cc713a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - doutrele [peap] Got tunneled request EAP-Message = 0x0205000d01646f757472656c65 server { PEAP: Got tunneled identity of doutrele PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x0205000d01646f757472656c65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 5 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 User-Category = "employee" EAP-Message = 0x010600221a0106001d10a246c3c6516b9d77ea1d3015a7a84abb646f757472656c65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb69c907bb69a8aaa3577bd2d0d1d3df6 [peap] Got tunneled reply RADIUS code 11 User-Category = "employee" EAP-Message = 0x010600221a0106001d10a246c3c6516b9d77ea1d3015a7a84abb646f757472656c65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb69c907bb69a8aaa3577bd2d0d1d3df6 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 14 to 157.159.21.100 port 54360 EAP-Message = 0x0106004b19001703010040c9ce0f68b431ebd559ed9175c87b80c001d5c5c4269aa5a0da2615fa72da470cf0641e9f5505789cd55c146b11b90bc11cae625a450a5b5cadc16e3540b1e52c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd238040823ac0ee159d033676 Finished request 14. Going to the next request Waking up in 4.3 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=15, length=289 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0206009019001703010020597cb64242f127a633edf6d83d9f753ad475e95f379a7a1efdc0d7dd62776011170301006090b9ad6ba6fa6c3042576000705030c6afed7e1d1dec688985936692dedd820826a1ceb87fa6867d05c7b7bc67f49c73338f2309f538172daddaf15656cef2172c77db8da21d259b53e7e8f9dbbab4282754f556c079b04defe4c92ce4374818 State = 0x268659fd238040823ac0ee159d033676 Message-Authenticator = 0x7d1093b42b7c313f5eb3aaad4e29921e +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 6 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020600431a0206003e310cc550d72183ae211d145eb7177df37000000000000000002fcfa8c1e0adf00cb92ed7a9aa47cc7b5f28dc099c500ad500646f757472656c65 server { PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x020600431a0206003e310cc550d72183ae211d145eb7177df37000000000000000002fcfa8c1e0adf00cb92ed7a9aa47cc7b5f28dc099c500ad500646f757472656c65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" State = 0xb69c907bb69a8aaa3577bd2d0d1d3df6 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 6 length 67 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Found LM-Password [mschap] Found NT-Password [mschap] Told to do MS-CHAPv2 for doutrele with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 User-Category = "employee" EAP-Message = 0x010700331a0306002e533d33303532464242454231393239443232383846343545353937433343453944383146344642363543 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb69c907bb79b8aaa3577bd2d0d1d3df6 [peap] Got tunneled reply RADIUS code 11 User-Category = "employee" EAP-Message = 0x010700331a0306002e533d33303532464242454231393239443232383846343545353937433343453944383146344642363543 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb69c907bb79b8aaa3577bd2d0d1d3df6 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 15 to 157.159.21.100 port 54360 EAP-Message = 0x0107005b19001703010050e632c5330ad9f069d55ce38adf081de60ffff8938c3878638e7f5099feb365b46747f065e913f9aa378b80d67149abad23532bc66a0b54fb9cdfb6c1d55deb1315b640f0bff8492abc792a5f3e6c36a1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd208140823ac0ee159d033676 Finished request 15. Going to the next request Waking up in 4.3 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=16, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02070050190017030100205537c71649b782859d409fc6d9470580de6ea4ff25c7d8f29b7b3474d87f4e9a17030100203bc3e97a5dab221d36cfef355c2e12f1397b296ca95c9eca15bdf19251ff5f2a State = 0x268659fd208140823ac0ee159d033676 Message-Authenticator = 0xb76c598918241bc7970283f80dae8b9f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 7 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020700061a03 server { PEAP: Setting User-Name to doutrele Sending tunneled request EAP-Message = 0x020700061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "doutrele" State = 0xb69c907bb79b8aaa3577bd2d0d1d3df6 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "doutrele", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "doutrele" [suffix] Adding Realm = "NULL" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok ++[control] returns ok [eap] EAP packet type response id 7 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for doutrele [ldap] expand: %{Stripped-User-Name} -> doutrele [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=doutrele) [ldap] expand: dc=int-evry,dc=fr -> dc=int-evry,dc=fr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=int-evry,dc=fr, with filter (uid=doutrele) [ldap] looking for check items in directory... [ldap] sambaNtPassword -> NT-Password == 0x3846343134354531463530334232353337443430363846343942363633434143 [ldap] sambaLmPassword -> LM-Password == 0x4434413632394242394536303843323438423045413541374446313335423033 [ldap] looking for reply items in directory... [ldap] eduPersonPrimaryAffiliation -> User-Category = "employee" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user doutrele authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[files] returns noop } # server inner-tunnel [peap] Got tunneled reply code 2 User-Category = "employee" EAP-Message = 0x03070004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "doutrele" [peap] Got tunneled reply RADIUS code 2 User-Category = "employee" EAP-Message = 0x03070004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "doutrele" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 16 to 157.159.21.100 port 54360 EAP-Message = 0x0108002b190017030100201bc2994f26ea599852815a48852b623a8a708485dfd96258e03a85adf942b362 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x268659fd218e40823ac0ee159d033676 Finished request 16. Going to the next request Waking up in 4.3 seconds. rad_recv: Access-Request packet from host 157.159.21.100 port 54360, id=17, length=225 User-Name = "anonymous(a)it-sudparis.eu" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02080050190017030100201b6bb71d045bbd397aab6948baac2fb2b76c4195d9654d7f29ff68628e26524b1703010020090ab9ed9dcd6032948f868e18f79c4e4befd935c4bf295f70ad0370772a986e State = 0x268659fd218e40823ac0ee159d033676 Message-Authenticator = 0x77d82030e53af4f2c9b848972bae2188 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "it-sudparis.eu" for User-Name = "anonymous(a)it-sudparis.eu" [suffix] Found realm "it-sudparis.eu" [suffix] Adding Stripped-User-Name = "anonymous" [suffix] Adding Realm = "it-sudparis.eu" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 8 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 17 to 157.159.21.100 port 54360 MS-MPPE-Recv-Key = 0x4dd99a0dc82263a2c33055682f321f5c8f87b27b19da448cf0854ded5f242689 MS-MPPE-Send-Key = 0x996340b45c88e53f2dd54aff5270ad77d58d66b608cfb312c7c824dfe0dcef65 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "anonymous" Finished request 17. Going to the next request Waking up in 4.2 seconds.

4 8

Two-Step LDAP authentication?
by Juan Rodríguez 16 Sep '10

16 Sep '10

Hi everybody! I'm a new subcriber of this list. I'm trying to setup a radius server with LDAP authentication; I've managed to authenticate a user (from a Cisco Device), but my fellows from Security Department think that we should have a two-step authentication: 1. User/password authentication, searching in cn=users,ou=pepe,ou=jose,c=es 2. A compare request, searching a specific objectclass in the LDAP tree. So, the idea is the following one: depending on the NAS-IP-Address, not only to check for a correct password, but search the uid in an objectclass called owner in the entry cn=deviceX,ou=pepe,ou=jose,c=es. deviceX is the one with the source NAS-IP-Address. I Know how to unlang using swicht statements, configuring differents ldap's modules in the radius server, so I can write the basedn I want. But how can do the step 2? Thank you and sorry for my english.

2 1

Pre release of 2.1.10
by Alan DeKok 16 Sep '10

16 Sep '10

It's been a few weeks since the last "pre" release of 2.1.10. I've put another one up on the web at: http://git.freeradius.org/pre/ Please test it out, and give feedback on issues / benefits. The file doc/ChangeLog contains all of the changes and new features in the server. For a "stable" release, this one has an unfortunate number of feature enhancements. However, some have been demanded for a very long time, and they could be added in an "isolated" fashion. The only change I see affecting anything is the handling of dead home servers when proxying. This was a bug fix to prevent the home servers from being marked dead/alive/dead/alive in quick sequence. This change has been tested to work, but please give it additional scrutiny. Alan DeKok.

4 7

connection start and stop infos
by matteo＠crs4.it 16 Sep '10

16 Sep '10

Hello, any idea why I don't see no connection start and stop into mysql radacct table (other infos are ok) while in the /var/log/radius/radacct/nas-ip-address/detail-date is ok? Thanks a lot. Matteo ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 2

Connecting the dots.
by Lance Haig 16 Sep '10

16 Sep '10

Hi, We have implemented a freeradius server on ubuntu 10.04 connecting to AD on windows 2003 to allow our users to auth against for wirless access. This morning it all broke. And we don’t know why. So I started looking to build a new server to fault find. I am trying to find some documentation to help me. Looking through the wiki and Alan’s website I found some documentation but it does not quite match the files and config I find In the freeradius directory. I am not sure how best to continue, can someone tell me how these two document site atch up? Thanks in advance Lance -- Lance Haig Virtualisation Engineer Forward Floor 1, Centro 3 19 Mandela Street London NW1 0DU T: 020 7121 1199 F: 020 7121 1196 M: 07786167805 W: www.forward.co.uk ---------------------------------------------------- This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify Forward immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Forward does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. Opinions expressed in this email are those of Lance Haig, and do not necessarily reflect those of Forward. If verification is required please request a hard-copy version. Forward Internet Group, a company incorporated in England with registered company number 05199774. Registered address: 1 Conduit Street, London W1S 2XA, United Kingdom; VAT Number: 844386209.

5 10

external auth modul
by Krisztian Kuti 16 Sep '10

16 Sep '10

Hi! I would like to auth my users from my own script. radiusd -X debug [otp_auth] expand: %{User-Name} -> qtgame [otp_auth] expand: %{User-Password} -> ?O????:J?? ?r [otp_auth] expand: %{reply:Secret} -> 8bd1f2fc2c2f68bb [otp_auth] expand: %{reply:Pin} -> 1616 [otp_auth] expand: %{reply:Offset} -> 0 my script don't understand this user-password :( how can i use cleartext password? and the other hand the ENV variable : USER_PASSWORD="3!\333$\026\276\362\202\002\2522\231\355\302[\374" how can i create this password from cleartext or can i decrypt to cleartext? QTGame

2 1

Certificates
by freeradius＠corwyn.net 16 Sep '10

16 Sep '10

I'm tinkering with my VPN setup using FreeRadius and AD, and getting "Not possible to verify the identity of the server". Some googling shows that message can be related to certificates. Some digging through the FreeRadius docs came up with: If FreeRADIUS was configured to use OpenSSL, then simply starting the server in root in debugging mode should also create test certificates, i.e.: Does this mean that, presuming I never did create certificates, that freeradius could function differently in debug mode than when running not in debug mode? Rick Rick Steeves http://www.sinister.net In reality nothing is more damaging to the adventurous spirit within a man than a secure future - Alexander Supertramp

2 1

freeradius, samba, AD peap/mschap-v2 redundancy and Certificate
by schilling 15 Sep '10

15 Sep '10

Hi, We are thinking of authenticate users via 802.1x/mschapv2 with freeradius, samba and Active Directory. Is the following a good redundancy design? If not, which one is better? radius1 1.1.1.1, radius2 2.2.2.2 Active Directory Domain Controllers 3.3.3.3 4.4.4.4 put 1.1.1.1 and 2.2.2.2 as primary/secondary radius server list in switch/AP/controllers. On radius1 krb5.conf kdc = 3.3.3.3 kdc = 4.4.4.4 smb.conf password server = 3.3.3.3, 4.4.4.4 On radius2 krb5.conf kdc = 4.4.4.4 kdc = 3.3.3.3 smb.conf password server = 4.4.4.4, 3.3.3.3 For certificate, do we need a server certificate for both radius1 and radius2 if we want supplicant to verify the server certificate? Thanks, Schilling

5 6

Radiusd.conf
by Samuel Isaias Barriga Perez 15 Sep '10

15 Sep '10

Hello I have a question: I want to configure the radiusd.conf, here es my problem there es two radiusd.conf in diferent paths /usr/local/etc/raddb/radiusd.conf and /root/freeradius-server-2.1.9/raddb/radiusd.conf. which configuration file should I use... is there a manual to configure this module??? Thank You Samuel I. Barriga

3 2

unidentified users and vlan assignment
by Fabien COMBERNOUS 15 Sep '10

15 Sep '10

Hi, We use the freeradius to assigne users in the vlan. The default settings rejects users in case of a request from an unidentified user. Instead of this we would like assign him to a specific vlan. I don't find information about how to do this. Any pointer or information are wellcome. Regards, -- *Fabien COMBERNOUS* /unix system engineer/ www.kezia.com <http://www.kezia.com/> *Tel: +33 (0) 467 992 986* Kezia Group

2 8