- Freeradius-Users - lists.freeradius.org

Certificate validation time
by _Stefan_H 23 Jul '10

23 Jul '10

Hi, I'm using freeradius 2.1.1 and i created my certificates with the makefile and the config-files. Is it possible to rise the time the cerficate is valid, because if i change the entrys "default_days" and "default_crl_days" in the ca.cnf to an higher value, nothing happens after I recreat the certificates, everytime the certificate is only 30 days valid. Sorry for bad english -- View this message in context: http://old.nabble.com/Certificate-validation-time-tp29249676p29249676.html Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

Re: Freeradius-Users Digest, Vol 63, Issue 86
by Wayne Van der Merwe 23 Jul '10

23 Jul '10

> > Wayne Van der Merwe wrote: > > I have FreeRADIUS 2.1.1 setup on SUS server 10.1 > > > > We are wanting to do a LDAP connection to Novell edirectory server for > > our users. > > > > From the debug out put the LDAP session binded corectly > > The searched part failed. > > > > I would like to know did the radius server send out the loging name as > > uid=53986067? as indicated below. > > rlm_ldap: performing search in > > ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC, with filter (uid=53986067) > > Because: > > 1) the Access-Request contains "53986067" as the User-Name > 2) the ldap module is configured to use "uid=%{User-Name}" > > This is all shown in the debug output. > > > When i do a ldapsearch -h 10.219.176.30 -b > > ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC -x "uid=53986067" > > I get no results. > > > > If i use -x "cn=53986067" the user is found. > > So... edit the ldap module configuration to use "cn=%{User-Name}" > instead of "uid". There's a reason the configuration files are text: > they can be edited. > > Alan DeKok. > > > > ------------------------------ > > Noted After the change i have this problem in the debug output rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC, with filter (cn=53986067) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user 53986067 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 The "[ldap] No default NMAS login sequence how do i sort this out?" and "WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly?" is to do with a clear text password that radius needs to read from the LDAP server as per other posts. how or where do i sort this out. Is this also related to the NMAS login sequence?

2 1

return a special value in reply when simultaneous use
by Ana Gallardo 23 Jul '10

23 Jul '10

Hello, I'm working with Freeradius 2.1.8 I'm using session (sql) to control simultaneous use. I would like to return a special value if an user try to access with credentials in use. Group session {...} always resturns ok, so I don't know what can I do in post-auth to distinguish between all reject. I test this configuration in my default server: session { if ("%{Realm}" == "xxx.es") { sql } } post-auth { if (fail) { update reply { Codigo-Reject := Imposible-Contactar-Backend } reject } sql Post-Auth-Type REJECT { if (simulcount) { update reply { Codigo-Reject = Sesion-Abierta } } update reply { Codigo-Reject = Credenciales-Erroneas } sql attr_filter.access_reject } } But don't work. Here is part of the debug info for an accept request: [pap] User authenticated successfully ++[pap] returns ok +- entering group session {...} ++? if ("%{Realm}" == "xxx.es") expand: %{Realm} -> xxx.es ?? Evaluating ("%{Realm}" == "xxx.es") -> TRUE ++? if ("%{Realm}" == "xxx.es") -> TRUE ++- entering if ("%{Realm}" == "xxx.es") {...} . . . rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Released sql socket id: 4 +++[sql] returns ok ++- if ("%{Realm}" == "xxx.es") returns ok +- entering group post-auth {...} And here is part of the debug info for an reject request for simultaneous use: [pap] User authenticated successfully ++[pap] returns ok +- entering group session {...} ++? if ("%{Realm}" == "xxx.es") expand: %{Realm} -> xxx.es ?? Evaluating ("%{Realm}" == "xxx.es") -> TRUE ++? if ("%{Realm}" == "xxx.es") -> TRUE ++- entering if ("%{Realm}" == "xxx.es") {...} . . . rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 +++[sql] returns ok ++- if ("%{Realm}" == "xxx.es") returns ok } # server rinuex Using Post-Auth-Type Reject +- entering group REJECT {...} ++? if (simulcount) ? Evaluating (simulcount) -> TRUE ++? if (simulcount) -> TRUE I need help. Thank you very much and sorry for my english. -- ____________________ Ana Gallardo Gómez ____________________

1 2

LDAP search problem
by Wayne Van der Merwe 23 Jul '10

23 Jul '10

I have FreeRADIUS 2.1.1 setup on SUS server 10.1 We are wanting to do a LDAP connection to Novell edirectory server for our users. >From the debug out put the LDAP session binded corectly The searched part failed. I would like to know did the radius server send out the loging name as uid=53986067? as indicated below. rlm_ldap: performing search in ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC, with filter (uid=53986067) When i do a ldapsearch -h 10.219.176.30 -b ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC -x "uid=53986067" I get no results. If i use -x "cn=53986067" the user is found. I used radtest to do the testing Debug File --------------------------------------- FreeRADIUS Version 2.1.1, for host i686-suse-linux-gnu, built on Nov 19 2008 at 16:17:41 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } }autharise a user. client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" shortname = "localhost" nastype = "other" } client 10.219.139.253/24 { require_message_authenticator = no secret = "freeradius" shortname = "DoHICTFrere" nastype = "other" } client 10.219.220.2/23 { require_message_authenticator = no secret = "qwerty123456" shortname = "DoHICTFrere" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "Jup1ter" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "10.219.176.30" port = 389 password = "xxxxxx" identity = "cn=uniLDAPuser,ou=ADMIN,o=EC" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x817d2a0 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 32772, id=194, length=60 User-Name = "53986067" User-Password = "xxxxxx" NAS-IP-Address = 10.219.139.100 NAS-Port = 0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "53986067", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop [ldap] performing user authorization for 53986067 [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=53986067) [ldap] expand: ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC -> ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 10.219.176.30:389, authentication 0 rlm_ldap: bind as cn=uniLDAPuser,ou=ADMIN,o=EC/xxxxxx to 10.219.176.30:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC, with filter (uid=53986067) rlm_ldap: object not found or got ambiguous search result [ldap] search failed rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Login incorrect (rlm_ldap: User not found): [53986067] (from client localhost port 0) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 53986067 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.2 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 194 to 127.0.0.1 port 32772 Waking up in 4.9 seconds. LDAP file ----------------------------------- # -*- text -*- # # $Id$ # Lightweight Directory Access Protocol (LDAP) # # This module definition allows you to use LDAP for # authorization and authentication. # # See raddb/sites-available/default for reference to the # ldap module in the authorize and authenticate sections. # # However, LDAP can be used for authentication ONLY when the # Access-Request packet contains a clear-text User-Password # attribute. LDAP authentication will NOT work for any other # authentication method. # # This means that LDAP servers don't understand EAP. If you # force "Auth-Type = LDAP", and then send the server a # request containing EAP authentication, then authentication # WILL NOT WORK. # # The solution is to use the default configuration, which does # work. # # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We # really can't emphasize this enough. # ldap { # # Note that this needs to match the name in the LDAP # server certificate, if you're using ldaps. server = "10.219.176.30" identity = "cn=uniLDAPuser,ou=ADMIN,o=EC" password = "xxxxxx" basedn = "ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" #base_filter = "(objectclass=radiusprofile)" # How many connections to keep open to the LDAP server. # This saves time over opening a new LDAP socket for # every authentication request. ldap_connections_number = 5 # seconds to wait for LDAP query to finish. default: 20 timeout = 4 # seconds LDAP server has to process the query (server-side # time limit). default: 20 # # LDAP_OPT_TIMELIMIT is set to this value. timelimit = 3 # # seconds to wait for response of the server. (network # failures) default: 10 # # LDAP_OPT_NETWORK_TIMEOUT is set to this value. net_timeout = 1 # # This subsection configures the tls related items # that control how FreeRADIUS connects to an LDAP # server. It contains all of the "tls_*" configuration # entries used in older versions of FreeRADIUS. Those # configuration entries can still be used, but we recommend # using these. # tls { # Set this to 'yes' to use TLS encrypted connections # to the LDAP database by using the StartTLS extended # operation. # # The StartTLS operation is supposed to be # used with normal ldap connections instead of # using ldaps (port 689) connections start_tls = no # cacertfile = /path/to/cacert.pem # cacertdir = /path/to/ca/dir/ # certfile = /path/to/radius.crt # keyfile = /path/to/radius.key # randfile = /path/to/rnd # Certificate Verification requirements. Can be: # "never" (don't even bother trying) # "allow" (try, but don't fail if the cerificate # can't be verified) # "demand" (fail if the certificate doesn't verify.) # # The default is "allow" # require_cert = "demand" } # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" # profile_attribute = "radiusProfileDn" # access_attr = "dialupAccess" # Mapping of RADIUS dictionary attributes to LDAP # directory attributes. dictionary_mapping = ${confdir}/ldap.attrmap # Set password_attribute = nspmPassword to get the # user's password from a Novell eDirectory # backend. This will work ONLY IF FreeRADIUS has been # built with the --with-edir configure option. # # See also the following links: # # http://www.novell.com/coolsolutions/appnote/16745.html # https://secure-support.novell.com/KanisaPlatform/Publishing/558/3009668_f.S… # # Novell may require TLS encrypted sessions before returning # the user's password. # # password_attribute = userPassword # Un-comment the following to disable Novell # eDirectory account policy check and intruder # detection. This will work *only if* FreeRADIUS is # configured to build with --with-edir option. # edir_account_policy_check = no # # Group membership checking. Disabled by default. # groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" groupmembership_attribute = radiusGroupName # compare_check_items = yes # do_xlat = yes # access_attr_used_for_allow = yes # # By default, if the packet contains a User-Password, # and no other module is configured to handle the # authentication, the LDAP module sets itself to do # LDAP bind for authentication. # # THIS WILL ONLY WORK FOR PAP AUTHENTICATION. # # THIS WILL NOT WORK FOR CHAP, MS-CHAP, or 802.1x (EAP). # # You can disable this behavior by setting the following # configuration entry to "no". # # allowed values: {no, yes} # set_auth_type = yes # ldap_debug: debug flag for LDAP SDK # (see OpenLDAP documentation). Set this to enable # huge amounts of LDAP debugging on the screen. # You should only use this if you are an LDAP expert. # # default: 0x0000 (no debugging messages) # Example:(LDAP_DEBUG_FILTER+LDAP_DEBUG_CONNS) #ldap_debug = 0x0028 }

3 2

PAP dont decrypt
by Lionne Stangier 23 Jul '10

23 Jul '10

I need help with the pap module. I set modules/pap auto_header = yes, but if I start a test connect pap say: [pap] No clear-text password in the request. Not performing PAP. The password is MD5. Lionne Stangier Radius -X Its looks like the pap module can't load. ----------------------------------------------------- set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS MD5-Password rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x825fe58 Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.125.1 port 1220, id=0, length=143 User-Name = "lionne.stangier" NAS-IP-Address = 192.168.125.1 Called-Station-Id = "0016b61397d9" Calling-Station-Id = "00166f09d8c6" NAS-Identifier = "0016b61397d9" NAS-Port = 23 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x02000014016c696f6e6e652e7374616e67696572 Message-Authenticator = 0x67e298801458a6efcc4a916db9d62383 +- entering group authorize {...} ++[chap] returns noop [ldap] performing user authorization for lionne.stangier [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> lionne.stangier [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=lionne.stangier) [ldap] expand: dc=allesklar,dc=com -> dc=allesklar,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap.allesklar.org:389, authentication 0 [ldap] bind as / to ldap.allesklar.org:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=allesklar,dc=com, with filter (uid=lionne.stangier) [ldap] looking for check items in directory... [ldap] userPassword -> MD5-Password == 0x7b4d44357d556f73777963326e6b556d48634d3773674f713755513d3d [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user lionne.stangier authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [pap] No clear-text password in the request. Not performing PAP. ++[pap] returns noop No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> lionne.stangier attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.6 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 0 to 192.168.125.1 port 1220 Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +22 Ready to process requests.

3 6

No-AUTH method
by Isabelle RECH 23 Jul '10

23 Jul '10

Hi, Dear Feeradius USER After correcting my default file in /etc/freeradius/sites-available, I've got the following errors after testing authentication: It's seems to be a missing authentification method in my configuration. We're using a CISCO4400 controler, and the 'Web RADIUS authentication' parameter is set to 'PAP' on my Controller./ Cleaning up request 1 ID 14 with timestamp +376 Waking up in 1.0 seconds. Cleaning up request 2 ID 15 with timestamp +377 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 40925, id=168, length=57 User-Name = "irech" User-Password = "tmcqtv0" NAS-IP-Address = 192.168.55.150 NAS-Port = 10 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "irech", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [irech/tmcqtv0] (from client localhost port 10) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> irech attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 168 to 127.0.0.1 port 40925 Waking up in 4.9 seconds. Cleaning up request 3 ID 168 with timestamp +548 Ready to process requests. auth: No authenticate method (Auth-Type) configuration found for the re/q Could you help me to go on ? Best Regards -- __________________________________ Isabelle RECH LE RECIS Enssib Département informatique 17-21 Bd du 11 Novembre 1918 69623 Villeurbanne Cedex Tel : 04 72 44 43 34 http://www.enssib.fr/ __________________________________

2 1

Mac-auth checking in sites-enabled/default
by Tom Leach 23 Jul '10

23 Jul '10

I'm currently using Freeradius v2.1.9 and I'm trying to write a condition in the authorize section to use a different module depending on whether Mac-auth or someother auth is being called. In reading the wiki (http://wiki.freeradius.org/Mac-Auth) it appears that I want to check (Chap-Password == hash(User-Name)) but I'm having a problem getting the unlang syntax correct. So far, I've tried: if (Chap-Password == hash(User-Name)){ which fails with: Consecutive conditions at (User-Name)) /etc/raddb/sites-enabled/default[62]: Errors parsing authorize section. and: if (Chap-Password == hash %{request:User-Name}) { which fails with: Consecutive conditions at %{request:User-Name}) /etc/raddb/sites-enabled/default[62]: Errors parsing authorize section. So, it appears that I'm having a fundamental failure to understand the conditional statements in unlang. So, is the wiki old/out-of-date, just pseudo code, or is the hash function something that I need to write? My NAS doesn't send a Service-Type and the Calling-Station-Id is in a different format that I can munge to get into the same format as User-Name, but I thought the hash option would be the quickest. Thanks! Tom Leach

3 2

No "known good" password was found in LDAP
by newtownz 22 Jul '10

22 Jul '10

Hi, I have a setup with a laptop, access-point, wireless-controller, freeradius 2.1.8 (ubuntu 10.04) and SLES 10 eDirectory. When I put the username and password in the users file everything works fine (802.1x, PEAP) When I try to move authentication with the eDirectory with ldap, I get the Warning no known... but then the user is authorized. ([ldap] user aruba authorized to use remote access) [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=aruba) [ldap] expand: o=org -> o=org [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to xxx.yyy.110.136:389, authentication 0 [ldap] bind as cn=admin,o=org/admin to xxx.yyy.110.136:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in o=org, with filter (uid=aruba) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user aruba authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 The password stored in eDirectory is valid. My understanding of eDirectory is that it will never let you see the actual password of a user, it will hash it first. Is this behavior of freeradius normal? Later in the process the user is rejected because no Auth-Type was found, is this related? Jean -- View this message in context: http://old.nabble.com/No-%22known-good%22-password-was-found-in-LDAP-tp2923… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

How to apply logical OR in the auth. modul
by Jevos, Peter 22 Jul '10

22 Jul '10

Hi I have in the modules/ntlm_auth_vpn command: exec ntlm_auth_vpn { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --password=%{User-Password} --require-membership-of=domain1" } Is it possible to add another command ( with different domain ) and to add OR in order to choose which one will pass ? Something like this: exec ntlm_auth_vpn { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --password=%{User-Password} --require-membership-of=domain1" OR program = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --password=%{User-Password} --require-membership-of=domain2" } It means that auth-type ntml_auth_vpn is right if one of these command will pass Thank pet

3 5

How to display Auth-type in th log
by Jevos, Peter 22 Jul '10

22 Jul '10

HI Is it possible to display type of authentication ( Auth-type ) that the clients used during the authentication ? Thank pet

2 3