- Freeradius-Users - lists.freeradius.org

Proxy accounting and leaving an entry in the local freeradius MySQL DB
by Emilio Inthamoussu 08 Jul '10

08 Jul '10

Dear all, We have a platform with freeRadius 1.1.4 (I know, it´s a bit old J). It is connected to a MySQL database where the accounting requests are saved. The freeRadius is configured to proxy the accounting requests of one specific realm, but we also need that those accounting requests remain saved in our MySQL database, besides being sent to an external server. We were looking for information about this particular issue, but we only found that when proxying the requests, a file (no the DB) is written. Somebody know how to do proxy and also save an entry in the local database? Thanks for your help!! Emilio

2 1

rlm_exec
by Hubert Kupper 08 Jul '10

08 Jul '10

Hello, I have installed freeradius 2.1.9-0 on a SLES 11 64 bit machine. When I try to start with freeradius -X then I get the following error: radiusd: #### Instantiating modules #### instantiate { /etc/raddb/radiusd.conf[1384]: Failed to link to module 'rlm_exec': file not found I've searched the freeradius mailing archive but I didn't find an entry. Can anybody help me? Best regards Hubert

3 4

PEAP/MSCHAPv2, Post-Auth-Type REJECT {} of inner-tunnel is never entered for access reject
by Fads Afds 08 Jul '10

08 Jul '10

Hi Fellows, I have configured FreeRadius 2.1.8 running on SLES 11 for PEAP/MSCHAPv2. MySQL is used for user database. I have tested using "eapol_test" and win/XP SP3 supplicant. Accounting data can be received & stored to radacct table. Inner-server can successfully accept user with accumulated session time quota not exceeded and reject user with accumulated session time quota exceeded. My problem: I expect to store accept or reject log with rejecting message to radpostauth table. For access-accept case, sql inside post-auth {} of inner-tunnl is invoked and logging message is written to radpostauth table as expected. For access-reject cases (username not existed in db, wrong username, accumulated session time quota exceeded, etc), Post-Auth-Type REJECT {} of inner-tunnel is never entered. What is wrong? Any help? Thanks in advance. Cheers, Joe Below include: 1. Content of post-auth section of file /etc/raddb/sites-available/inner-server: 2. content of authorize section of file /etc/raddb/sites-available/inner-server: 3. radiusd -X debug message for access-accept case 4. radiusd -X debug message for access-reject case -------1. Content of post-auth section of file /etc/raddb/sites-available/inner-server:--------- post-auth { #1st successful login and account NOT expired: update "ticket_expiration" and "1st_login_date" in table "radreply" by external script if ( ("%{reply:1st_login_date}" == "29991231") && ("%{reply:acct_expiration}" >= "%D") ) { #invoke external script by module "exec" 1st_login_update noop } sql Post-Auth-Type REJECT { sql reply_log attr_filter.access_reject } } ----1. ends------------------------------------------------------------- ----2. Content of authorize {} section of file /etc/raddb/sites-available/inner-server:------ authorize { mschap update control { Proxy-To-Realm := LOCAL } eap { ok = return } auth_log sql #Username NOT existed in db if (!(control:Cleartext-Password)) { update control { My-Err-Message := "Username %{request:User-Name} not existed in db" Post-Auth-Type := "REJECT" //same result with or without this statement } reject } #account expired elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) { update control { My-Err-Message := "Your BU-Guest account has been expired since %{reply:acct_expiration}" Post-Auth-Type := "REJECT" //same result with or without this statement } reject } #account NOT expired. Already login before and ticket expired: Rejected and return message "Your BU-Guest ticket has expired" elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_expiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expiration}" < "%D") ) { update control { My-Err-Message := "Your BU-Guest ticket has been expired since %{reply:ticket_expiration}" Post-Auth-Type := "REJECT" //same result with or without this statement } reject } #for session-time quota, modify My-Err-Message if exceeded noreset_time_counter { reject = 1 } if (reject) { update control { My-Err-Message := "Your session-time quota has been used up." } reject = return } #for session-traffic quota, modify My-Err-Message if exceeded noreset_traffic_counter { reject = 1 } if (reject) { update control { My-Err-Message := "Your session-traffic quota has been used up." } reject = return } } -------2. ends--------------------------------------------------------- --------------3. radiusd -X debug message for access-accept case ------- Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=0, length=118 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200000a0174696d6533 Message-Authenticator = 0x86d8b188ea06f1e2db10c3c3f095378f +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Flushing SSL sessions (of #0) [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 127.0.0.1 port 58342 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c3420710d2d583cbd5e9f57d1d5e1 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=1, length=235 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0201006d198000000063160301005e0100005a03014c35a79c66aa56 b5c22cbfc40e708d0c8c7f35b5d8f5b657853a6a25057c2de3000032003900380035008800870084 00160013000a00330032002f00450044004100050004001500120009001400110008000600030201 00 State = 0x710c3420710d2d583cbd5e9f57d1d5e1 Message-Authenticator = 0xef0d3c6f293a95565fa98cb8eb7bc11e +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 109 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 99 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005e], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 004a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 084d], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 1 to 127.0.0.1 port 58342 EAP-Message = 0x0102040019c000000abc160301004a0200004603014c35a79c7bfdb3 61e9348ae2501e91aca3880058ed5258cf4b1ad43c4c1ee7522042bd3af4db1b4644e3a178f359c0 982943e723d7f05cd6cd24524614ee6c0313003901160301084d0b0008490008460003a8308203a4 3082028ca003020102020101300d06092a864886f70d010104050030818c310b3009060355040613 02434e310b300906035504081302484b310c300a06035504071303656475310d300b060355040a13 04484b42553127302506092a864886f70d0109011618726f6f7440667267756573742e686b62752e 6564752e686b312a302806035504031321484b425520477565 EAP-Message = 0x73742043412063657274202836346269742073657276657229302017 0d3130303632343033353835305a180f32303530303631343033353835305a308182310b30090603 5504061302434e310b300906035504081302484b310d300b060355040a1304484b4255312e302c06 035504031325484b4255204775657374207365727665722063657274696669636174652028363462 6974293127302506092a864886f70d0109011618726f6f7440667267756573742e686b62752e6564 752e686b30820122300d06092a864886f70d01010105000382010f003082010a0282010100c7649e e337738ce465aec9a12a375bd4d76fc3c2f50ac701065d1433 EAP-Message = 0x22c38dd78776d5ad0cb747a32f6b512dce6d26cccffefd49cf151767 0305c6cb6eee0b70c86cb259383ca439bf011e8d8689cd17c41e99498256f13e6f14282b8eeef46f 95e742d40254b69d7270d1d349e8cd41cff1dc98ea38fb494ea6007aed1575391d69e9f1c230fea9 125f09a28d544282e9520e4c5987f54ff43f94567991d6172f98bfd3a200aeb07e60345e40caff2f 1f34c52e77707e3321a774bc7601827ccbd723e044ee635de38dc174e37aea2640f5dbacb3454bd8 9bd2e03b81031365232fe8f014c069983950f75aa8fdcce7a9ee52d57dc7fec1512a57fabb3b993b 0203010001a317301530130603551d25040c300a06082b0601 EAP-Message = 0x0505070301300d06092a864886f70d01010405000382010100192613 ffaf84004131ad7ce0d3da7b42d8a594371b96058ea7dc28554921dfd279076ad03cbf83ab81d7d3 ac909202e97a3c22fdad6eee38f2961ef4e9cc9398c5e4bd8a0f41c9174d4fa44a1e77e95c887c06 5197300ea90c8ffc1d32c898c4e137b6a74834c769d7be8008fea4b3ca9c5a33505b588fd93fa440 584d00f8c0c11d62bd886037289e5f27cec1039a4c311a04a7cf75b9ed578b840c66993dea65d31a df591ffc290d98d6565e70a1d3d45ae3f0c877c5104d1def8c23a79f38c92731165bfb2a84759f2c 6c07e15ff75e4fe6f99e67dac4fc5ca7bf6cbdf849c44b77f6 EAP-Message = 0x614977256b1dcde1b92a76f3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c3420700e2d583cbd5e9f57d1d5e1 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=2, length=132 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0x710c3420700e2d583cbd5e9f57d1d5e1 Message-Authenticator = 0x891c4b49a9002f7d191a0b0a552ce142 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 127.0.0.1 port 58342 EAP-Message = 0x010303fc1940d8d084a884e20a2a165c46af33618c22000498308204 943082037ca003020102020900a00b0c8b6ee723bb300d06092a864886f70d010105050030818c31 0b300906035504061302434e310b300906035504081302484b310c300a0603550407130365647531 0d300b060355040a1304484b42553127302506092a864886f70d0109011618726f6f744066726775 6573742e686b62752e6564752e686b312a302806035504031321484b425520477565737420434120 636572742028363462697420736572766572293020170d3130303632343033353833335a180f3230 3530303631343033353833335a30818c310b30090603550406 EAP-Message = 0x1302434e310b300906035504081302484b310c300a06035504071303 656475310d300b060355040a1304484b42553127302506092a864886f70d0109011618726f6f7440 667267756573742e686b62752e6564752e686b312a302806035504031321484b4255204775657374 204341206365727420283634626974207365727665722930820122300d06092a864886f70d010101 05000382010f003082010a0282010100c001917da3c962085a616702fa98c2bd794c7edfa3a1f038 258e018a126e736e3a61ae5120b956ab0566a9258b889d66e616e2d702b1a0f5ec79b1b484a9a9ec 5ff3ba49d31895a6073ac132c9aa28f3e9906d0a6e3c24e852 EAP-Message = 0x621586b8db41ce111ebf2befc143a5cc9d562d020594fe407135ec1c 068dd0303eca75e5c5dd9cab898af3e870072ea3eca78602644eea0bac0c5619925b56aba1b1c1fc 4c48fded87cdcf44d1b99a2c1f534e8b88e4a35f9d1ffa8a50cdb402743516a0cbce2a4796459501 875ec225357d4a362202e15ee12a0154f018e5b84a5e5884c268d3154ed41f7b78ea2f6df852e07b dd50a55c26467bcaf75c41d393bc78b27fb5170203010001a381f43081f1301d0603551d0e041604 14c134ca58d9d8f09b9207417630a08266b192ef523081c10603551d230481b93081b68014c134ca 58d9d8f09b9207417630a08266b192ef52a18192a4818f3081 EAP-Message = 0x8c310b300906035504061302434e310b300906035504081302484b31 0c300a06035504071303656475310d300b060355040a1304484b42553127302506092a864886f70d 0109011618726f6f7440667267756573742e686b62752e6564752e686b312a302806035504031321 484b42552047756573742043412063657274202836346269742073657276657229820900a00b0c8b 6ee723bb300c0603551d13040530030101ff300d06092a864886f70d010105050003820101000d81 bb75569e9ce10ee1cc274ce224d6d175d681f14079bdb2953b179dc9e15eedecd08f8d61f1759f3b b4c97458573e0b9b6b6be66954fc48d713a54ad949e99d806a EAP-Message = 0x400957b5cd394c74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c3420730f2d583cbd5e9f57d1d5e1 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=3, length=132 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x710c3420730f2d583cbd5e9f57d1d5e1 Message-Authenticator = 0x79334670af1988e1500764f8893519a6 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 127.0.0.1 port 58342 EAP-Message = 0x010402d6190012c062cd3163799ab42c262a3b39ee4aadeba8ca0584 510b5f850ecbe4afc188b998b5b79ebc112998a4791842e212835761d44b5202634a16bdc8886be5 a2a6ddef1becbbaa64117a58fd73726f412c140197da3a29fc44aa1b67361c18f9f72312826067f6 4edc638e6a8b5511cd2c9eff129e700e0d88cb6de9ef5c6c909025dc37b4abdc9fdc643561bb06b1 e07e30de728a7e8a4dc07dda92896b8975d7907b85b66fedf2623b70b61a7757012cb421a8c76616 0301020d0c00020900808fcc5daaf65ec4b9ed53a13aa5563c3a857d7b01a0935ce18302cbbd8117 bdcee617438d810d33e6737c2b63ad1b1e728d85e9aa9c155d EAP-Message = 0x84c5499240de4a0574ca81181dd71a196f1dccceee978f8380d16b7e 6019d903f2d5ed2428b8649b958dbd4a5c52b8f99989c064eb651266552a0b7eab32727454b2eee7 89c78aee3b000102008060d8a5934ce34b81cafd1c3fc8d46c5a388ed272c775dc16850bcf8d809b 5993441c997f71796739ce92d291e79f35676eb5c9bd803930ffbb7c1f1970328686307c6b6a6b33 22f3b0d6dcba4517a1af53ab3cf8a94ccc14999749239a1f1c141a3caab94646d10555148c750103 7469ed434c26f16fe521d5b9c63390591e9e010073b6d948f1730fabd195f88b32ab2073c1177e3f 8313ff0fb86c4516230d64748f4ad6e05d3a74c60a5e3771c5 EAP-Message = 0xb48e7440d370543c830387f08a3c5f8deef8c1def77e7e7114997e5d fcfa90d5d07d583b5e1913372411b2713f6c433f7feaf0cbb11357370479999f6ed5f02a67817c27 97f3e751f6e2636654cca929d4ea24237452d4ecc44466c0e5b8ef89e38d633335debe853d61d61a f6e12e19984be1e4d05264eef13ffb0f4e295f30d6ccb0990906f3086641ebae82786bc7765ecc90 f7aafd63506946bc0d548f62c6fd3d3ccce0926860b91a4f44f8368a1cd6cef37b4299cb396a415a 4efb937eafe3460f003aa489ea61a63d3d645ed26883a716030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c342072082d583cbd5e9f57d1d5e1 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=4, length=334 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400d01980000000c616030100861000008200801d83588e38d9da df4ffe23f7ed3b2b90f36c0943746527fc0bb73b2c79a83dc173d0ec11b22f40f9fa76c19a6ea462 a2d9269ab0ea7f5550b600a937d2ad6732c27835d982a04e89c69ec524012ce45abadffdec3023be 60a2d2b26a3a0402508b51917d53c3c62dcae67677282e66794baa766791251219f7e9de3b739abe 7d1403010001011603010030ed2012e3aa97c24fa0a52ec354e56dfdc5b34487cc0e70fbb71eb3f8 5860f8eac1199394ced9ca49eb9563a06a35e79d State = 0x710c342072082d583cbd5e9f57d1d5e1 Message-Authenticator = 0x751c2b6c92f2074d37c88e84f2454e0d +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data SSL: adding session 42bd3af4db1b4644e3a178f359c0982943e723d7f05cd6cd24524614ee 6c0313 to cache [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 127.0.0.1 port 58342 EAP-Message = 0x0105004119001403010001011603010030723f44d9944d700c443127 d161158b7db2f0787daccd60449dc6784b09a0a8d384d46ac7acac5b8084f40b7a9bc03f77 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c342075092d583cbd5e9f57d1d5e1 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=5, length=132 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x710c342075092d583cbd5e9f57d1d5e1 Message-Authenticator = 0xe84f03f178a81841fb46d3c61aa66e99 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 5 to 127.0.0.1 port 58342 EAP-Message = 0x0106002b19001703010020745a8862fff74372e41763caf7ac58d0a9 10a05c983876e0f379e1d7752e07ef Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c3420740a2d583cbd5e9f57d1d5e1 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=6, length=222 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02060060190017030100204f0b0f1efbcee34d4265a97b4fc13660be ff23b2408795c7ffc1a1c02227390e17030100300d3f41614731127eab3ca84d6cbfd7487854adc3 a6be922e4bd29675dad485590057a354a2723f2afd8b58c4e211661b State = 0x710c3420740a2d583cbd5e9f57d1d5e1 Message-Authenticator = 0xbdc712363b5e27d3228a5a4d717c3bd6 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - time3 [peap] Got tunnled request EAP-Message = 0x0206000a0174696d6533 server (null) { PEAP: Got tunneled identity of time3 PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to time3 Sending tunneled request EAP-Message = 0x0206000a0174696d6533 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" server inner-tunnel { +- entering group authorize {...} ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 6 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail -%Y%m%d -> /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expan ds to /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] expand: %t -> Thu Jul 8 18:25:32 2010 ++[auth_log] returns ok [sql] expand: %{User-Name} -> time3 [sql] sql_set_user escaped user --> 'time3' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute != 'Cleartext-Password') UNION (SEL ECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute = 'Cleartext-Password') ORDER BY id -> (SELECT id, username, attribute, value, op FROM radcheck WHERE usern ame = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id rlm_sql_mysql: query: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHE RE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radrepl y WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE usern ame = 'time3' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'time3' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE user name = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'time3' ORDER BY prior ity rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHE RE username = 'time3' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++? if (!(control:Cleartext-Password)) ?? Evaluating (control:Cleartext-Password) -> TRUE ? Converting !TRUE -> FALSE ++? if (!(control:Cleartext-Password)) -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE expand: %{reply:acct_expiration} -> 29991231 expand: %D -> 20100708 ?? Evaluating ("%{reply:acct_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE ?? Evaluating (reply:1st_login_date) -> TRUE ?? Evaluating (reply:ticket_expiration) -> TRUE expand: %{reply:1st_login_date} -> 20100601 ?? Evaluating ("%{reply:1st_login_date}" != "29991231") -> TRUE expand: %{reply:ticket_expiration} -> 20100830 expand: %D -> 20100708 ?? Evaluating ("%{reply:ticket_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) -> FALSE rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{ User-Name}'' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNam e='time3' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNa me='time3'}' [noreset_time_counter] sql_xlat [noreset_time_counter] expand: %{User-Name} -> time3 [noreset_time_counter] sql_set_user escaped user --> 'time3' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='time3' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='time 3' [noreset_time_counter] expand: /var/log/radius/sqltrace.sql -> /var/log/radius/ sqltrace.sql rlm_sql (sql): Reserving sql socket id: 3 rlm_sql_mysql: query: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName=' time3' [noreset_time_counter] sql_xlat finished rlm_sql (sql): Released sql socket id: 3 [noreset_time_counter] expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct W HERE UserName='time3'} -> 314 rlm_sqlcounter: Check item is greater than query result rlm_sqlcounter: Authorized user time3, check_item=4000000000, counter=314 rlm_sqlcounter: Sent Reply-Item for user time3, Type=Session-Timeout, value=3999 999686 ++[noreset_time_counter] returns ok ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noreset_traffic_counter] returns noop ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x0107001f1a0107001a10fff84cf3de7f4c94dd82062ae0a7cc3a7469 6d6533 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0a6fce370a68d41840671b0d943be774 [peap] Got tunneled reply RADIUS code 11 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x0107001f1a0107001a10fff84cf3de7f4c94dd82062ae0a7cc3a7469 6d6533 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0a6fce370a68d41840671b0d943be774 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 6 to 127.0.0.1 port 58342 EAP-Message = 0x0107004b19001703010040dcc0c868deed88fa3789019a7fea4c9f76 adf44ae61e81ee6667849626e5908b85dbe5a43227c582a624c356435ccad8d0249db5cbb190a77c e4d8652b4bc46b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c3420770b2d583cbd5e9f57d1d5e1 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=7, length=270 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0207009019001703010020d4d6a820410d0522989fa80aa89cec5b6e 14721ddccc2012d5e5c5c7214caeee17030100609922e3d2b5a68f441931df2eb4f29652a9111634 f2a22b98d51f5873e7034b798ac6660188bb1398c03e7cb9299417260b45ba08275c3ef3c7492f77 37672412dea92f4c9b13049b4a56421e5bcf158f9883c805399c096733f112a8b0e9873a State = 0x710c3420770b2d583cbd5e9f57d1d5e1 Message-Authenticator = 0x822422970a0a08993b17aa87398031b9 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020700401a0207003b31ca83d4b3a63676473f79a8407ad5a3510000 00000000000072fec53acc650555265ec2e8be09158058c8f9d2f675a4a50074696d6533 server (null) { PEAP: Setting User-Name to time3 Sending tunneled request EAP-Message = 0x020700401a0207003b31ca83d4b3a63676473f79a8407ad5a3510000 00000000000072fec53acc650555265ec2e8be09158058c8f9d2f675a4a50074696d6533 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "time3" State = 0x0a6fce370a68d41840671b0d943be774 NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" server inner-tunnel { +- entering group authorize {...} ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 64 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail -%Y%m%d -> /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expan ds to /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] expand: %t -> Thu Jul 8 18:25:32 2010 ++[auth_log] returns ok [sql] expand: %{User-Name} -> time3 [sql] sql_set_user escaped user --> 'time3' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute != 'Cleartext-Password') UNION (SEL ECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute = 'Cleartext-Password') ORDER BY id -> (SELECT id, username, attribute, value, op FROM radcheck WHERE usern ame = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id rlm_sql_mysql: query: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHE RE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radrepl y WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE usern ame = 'time3' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'time3' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE user name = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'time3' ORDER BY prior ity rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHE RE username = 'time3' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++? if (!(control:Cleartext-Password)) ?? Evaluating (control:Cleartext-Password) -> TRUE ? Converting !TRUE -> FALSE ++? if (!(control:Cleartext-Password)) -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE expand: %{reply:acct_expiration} -> 29991231 expand: %D -> 20100708 ?? Evaluating ("%{reply:acct_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE ?? Evaluating (reply:1st_login_date) -> TRUE ?? Evaluating (reply:ticket_expiration) -> TRUE expand: %{reply:1st_login_date} -> 20100601 ?? Evaluating ("%{reply:1st_login_date}" != "29991231") -> TRUE expand: %{reply:ticket_expiration} -> 20100830 expand: %D -> 20100708 ?? Evaluating ("%{reply:ticket_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) -> FALSE rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{ User-Name}'' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNam e='time3' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNa me='time3'}' [noreset_time_counter] sql_xlat [noreset_time_counter] expand: %{User-Name} -> time3 [noreset_time_counter] sql_set_user escaped user --> 'time3' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='time3' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='time 3' [noreset_time_counter] expand: /var/log/radius/sqltrace.sql -> /var/log/radius/ sqltrace.sql rlm_sql (sql): Reserving sql socket id: 1 rlm_sql_mysql: query: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName=' time3' [noreset_time_counter] sql_xlat finished rlm_sql (sql): Released sql socket id: 1 [noreset_time_counter] expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct W HERE UserName='time3'} -> 314 rlm_sqlcounter: Check item is greater than query result rlm_sqlcounter: Authorized user time3, check_item=4000000000, counter=314 rlm_sqlcounter: Sent Reply-Item for user time3, Type=Session-Timeout, value=3999 999686 ++[noreset_time_counter] returns ok ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noreset_traffic_counter] returns noop ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv2 for time3 with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x010800331a0307002e533d4545334331373933383638393534324139 3230333839453445413539304631343245394331413644 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0a6fce370b67d41840671b0d943be774 [peap] Got tunneled reply RADIUS code 11 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x010800331a0307002e533d4545334331373933383638393534324139 3230333839453445413539304631343245394331413644 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0a6fce370b67d41840671b0d943be774 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 7 to 127.0.0.1 port 58342 EAP-Message = 0x0108005b19001703010050e73c970ca872a0406dea9360b2831f3b4d 9960df3c69a3fbee615eeb461f2fd621df7bb4814edcbd8952534c49ff889f58899e53a1a6099006 bfe22eb8b1fdfeacfc1a435958aa40fb51e66f3f33ab3a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c342076042d583cbd5e9f57d1d5e1 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=8, length=206 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02080050190017030100208c1a2ad8f6faa9398231e3290f605b26d3 3f89f219417d2c4d81e7a5ce15783a17030100208f66bbcfa14f3568277f9989d3d544cfcb74e6a8 2e519f4d1212795b984a53e3 State = 0x710c342076042d583cbd5e9f57d1d5e1 Message-Authenticator = 0x796dd15b9a449f6a220364198f52ca5d +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020800061a03 server (null) { PEAP: Setting User-Name to time3 Sending tunneled request EAP-Message = 0x020800061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "time3" State = 0x0a6fce370b67d41840671b0d943be774 NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" server inner-tunnel { +- entering group authorize {...} ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail -%Y%m%d -> /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expan ds to /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] expand: %t -> Thu Jul 8 18:25:32 2010 ++[auth_log] returns ok [sql] expand: %{User-Name} -> time3 [sql] sql_set_user escaped user --> 'time3' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute != 'Cleartext-Password') UNION (SEL ECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute = 'Cleartext-Password') ORDER BY id -> (SELECT id, username, attribute, value, op FROM radcheck WHERE usern ame = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id rlm_sql_mysql: query: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'time3' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHE RE username = 'time3' and attribute = 'Cleartext-Password') ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radrepl y WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE usern ame = 'time3' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'time3' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE user name = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'time3' ORDER BY prior ity rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHE RE username = 'time3' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++? if (!(control:Cleartext-Password)) ?? Evaluating (control:Cleartext-Password) -> TRUE ? Converting !TRUE -> FALSE ++? if (!(control:Cleartext-Password)) -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE expand: %{reply:acct_expiration} -> 29991231 expand: %D -> 20100708 ?? Evaluating ("%{reply:acct_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE ?? Evaluating (reply:1st_login_date) -> TRUE ?? Evaluating (reply:ticket_expiration) -> TRUE expand: %{reply:1st_login_date} -> 20100601 ?? Evaluating ("%{reply:1st_login_date}" != "29991231") -> TRUE expand: %{reply:ticket_expiration} -> 20100830 expand: %D -> 20100708 ?? Evaluating ("%{reply:ticket_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) -> FALSE rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{ User-Name}'' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNam e='time3' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNa me='time3'}' [noreset_time_counter] sql_xlat [noreset_time_counter] expand: %{User-Name} -> time3 [noreset_time_counter] sql_set_user escaped user --> 'time3' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='time3' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='time 3' [noreset_time_counter] expand: /var/log/radius/sqltrace.sql -> /var/log/radius/ sqltrace.sql rlm_sql (sql): Reserving sql socket id: 4 rlm_sql_mysql: query: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName=' time3' [noreset_time_counter] sql_xlat finished rlm_sql (sql): Released sql socket id: 4 [noreset_time_counter] expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct W HERE UserName='time3'} -> 314 rlm_sqlcounter: Check item is greater than query result rlm_sqlcounter: Authorized user time3, check_item=4000000000, counter=314 rlm_sqlcounter: Sent Reply-Item for user time3, Type=Session-Timeout, value=3999 999686 ++[noreset_time_counter] returns ok ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noreset_traffic_counter] returns noop ++? if (reject) ? Evaluating (reject) -> FALSE ++? if (reject) -> FALSE Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok Login OK: [time3] (from client localhost port 0 cli 02-00-00-00-00-01 via TLS tu nnel) +- entering group post-auth {...} ++? if (("%{reply:1st_login_date}" == "29991231") && ("%{reply:acct_expiration}" >= "%D") ) expand: %{reply:1st_login_date} -> 20100601 ?? Evaluating ("%{reply:1st_login_date}" == "29991231") -> FALSE ?? Skipping ("%{reply:acct_expiration}" >= "%D") ++? if (("%{reply:1st_login_date}" == "29991231") && ("%{reply:acct_expiration}" >= "%D") ) -> FALSE [reply_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/reply-detai l-%Y%m%d -> /var/log/radius/radacct/127.0.0.1/reply-detail-20100708 [reply_log] /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d exp ands to /var/log/radius/radacct/127.0.0.1/reply-detail-20100708 [reply_log] expand: %t -> Thu Jul 8 18:25:32 2010 ++[reply_log] returns ok [sql] expand: %{User-Name} -> time3 [sql] sql_set_user escaped user --> 'time3' [sql] expand: INSERT INTO radpostauth (ID, username, password, nas_ip, auth_result, reply_message, authdate) VALUES (NULL, '%{User-Name}', aes_encrypt('NA', 'abc123456def'), '%{NAS-IP-ADD RESS}', '%{reply:Packet-Type}', '%{control:My-Err-Message}', '%S') -> INSERT INTO radpostauth (ID, username, passw ord, nas_ip, auth_result, reply_message, authdate) VAL UES (NULL, 'time3', aes_enc rypt('NA', 'abc123456def'), '127.0.0.1', 'Access-Accept', '', '2010-07-08 18:25:32') [sql] expand: /var/log/radius/sqltrace.sql -> /var/log/radius/sqltrace.sql rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (ID, username, password, nas_ip, auth_result, reply_message, authdate) VALUES (NULL, 'time3', aes_encrypt('NA', 'abc123456def'), '127.0.0.1', 'Access-Accept', '', '2010- 07-08 18:25:32') rlm_sql (sql): Reserving sql socket id: 3 rlm_sql_mysql: query: INSERT INTO radpostauth (ID, us ername, password, nas_ip, auth_result, reply_message, authdate) VALUES (NULL, 'time3', aes_encrypt('NA', 'abc123456def'), '127.0.0.1', 'Access-Accept', '', '2010-07-08 18:25:32') rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok } # server inner-tunnel [peap] Got tunneled reply code 2 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "time3" [peap] Got tunneled reply RADIUS code 2 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Session-Timeout = 3999999686 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "time3" [peap] Tunneled authentication was successful. [peap] SUCCESS [peap] Saving tunneled attributes for later ++[eap] returns handled Sending Access-Challenge of id 8 to 127.0.0.1 port 58342 EAP-Message = 0x0109003b190017030100303e08b1a2d1b28a52af62ee2de46fc70bb5 1f2c8876b709dc033eb67dac4e7d107d42328990db41d176b866c9b5dc3462 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710c342079052d583cbd5e9f57d1d5e1 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 58342, id=9, length=222 User-Name = "time3" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0209006019001703010020f5e34f99dabb9426b2cc077cd20d75cb1f 6d178a72b0136017f56929a9ebe876170301003069dd3e6ac821e2782dc47cab7eed4e0de694f6d0 49d02248c6e282c7d2f80b70690eac89370dbb302e008b76429ad113 State = 0x710c342079052d583cbd5e9f57d1d5e1 Message-Authenticator = 0x2e48e39d1253678a90df25d2cbeb7ce3 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time3", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Success [peap] Using saved attributes from the original Access-Accept [peap] Saving response in the cache [eap] Freeing handler ++[eap] returns ok Login OK: [time3] (from client localhost port 0 cli 02-00-00-00-00-01) Sending Access-Accept of id 9 to 127.0.0.1 port 58342 Session-Timeout = 3999999686 User-Name = "time3" MS-MPPE-Recv-Key = 0xcfc895845e6aca093ab94dcd81afd5096eac3b2ca11ec8bd708 711bd6f520f97 MS-MPPE-Send-Key = 0xe82169d80dd32224262bded10d64df4472ece71e5d99b29a578 3ca4f590d0a64 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 9. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +9 Cleaning up request 1 ID 1 with timestamp +9 Cleaning up request 2 ID 2 with timestamp +9 Cleaning up request 3 ID 3 with timestamp +9 Cleaning up request 4 ID 4 with timestamp +9 Cleaning up request 5 ID 5 with timestamp +9 Cleaning up request 6 ID 6 with timestamp +9 Cleaning up request 7 ID 7 with timestamp +9 Cleaning up request 8 ID 8 with timestamp +9 Cleaning up request 9 ID 9 with timestamp +9 Ready to process requests. ---3. ends------------------------------------------------------------ ---------4. radiusd -X debug message for access-reject case----------- Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=0, length=118 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200000a0174696d6531 Message-Authenticator = 0x24f4eb8ed73570357fa509e716f4ec3a +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Flushing SSL sessions (of #0) [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 127.0.0.1 port 49468 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e0379cb0870007f99580c2a718 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=1, length=235 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0201006d198000000063160301005e0100005a03014c35a8163bcc47 f3eeba48e97b7cabeda316ba25231834b83b7576019349dd53000032003900380035008800870084 00160013000a00330032002f00450044004100050004001500120009001400110008000600030201 00 State = 0x379da9e0379cb0870007f99580c2a718 Message-Authenticator = 0x7051a1856d18e6337c951776482ca698 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 109 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 99 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005e], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 004a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 084d], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 1 to 127.0.0.1 port 49468 EAP-Message = 0x0102040019c000000abc160301004a0200004603014c35a81667db13 e25f9bd85df914215360be8e2418dd50ed30f6b066d6aadfc42066e05cf10dd059ad56a7d8a36cb5 0353917b6f4635d6a24b23d44c25faea1c00003901160301084d0b0008490008460003a8308203a4 3082028ca003020102020101300d06092a864886f70d010104050030818c310b3009060355040613 02434e310b300906035504081302484b310c300a06035504071303656475310d300b060355040a13 04484b42553127302506092a864886f70d0109011618726f6f7440667267756573742e686b62752e 6564752e686b312a302806035504031321484b425520477565 EAP-Message = 0x73742043412063657274202836346269742073657276657229302017 0d3130303632343033353835305a180f32303530303631343033353835305a308182310b30090603 5504061302434e310b300906035504081302484b310d300b060355040a1304484b4255312e302c06 035504031325484b4255204775657374207365727665722063657274696669636174652028363462 6974293127302506092a864886f70d0109011618726f6f7440667267756573742e686b62752e6564 752e686b30820122300d06092a864886f70d01010105000382010f003082010a0282010100c7649e e337738ce465aec9a12a375bd4d76fc3c2f50ac701065d1433 EAP-Message = 0x22c38dd78776d5ad0cb747a32f6b512dce6d26cccffefd49cf151767 0305c6cb6eee0b70c86cb259383ca439bf011e8d8689cd17c41e99498256f13e6f14282b8eeef46f 95e742d40254b69d7270d1d349e8cd41cff1dc98ea38fb494ea6007aed1575391d69e9f1c230fea9 125f09a28d544282e9520e4c5987f54ff43f94567991d6172f98bfd3a200aeb07e60345e40caff2f 1f34c52e77707e3321a774bc7601827ccbd723e044ee635de38dc174e37aea2640f5dbacb3454bd8 9bd2e03b81031365232fe8f014c069983950f75aa8fdcce7a9ee52d57dc7fec1512a57fabb3b993b 0203010001a317301530130603551d25040c300a06082b0601 EAP-Message = 0x0505070301300d06092a864886f70d01010405000382010100192613 ffaf84004131ad7ce0d3da7b42d8a594371b96058ea7dc28554921dfd279076ad03cbf83ab81d7d3 ac909202e97a3c22fdad6eee38f2961ef4e9cc9398c5e4bd8a0f41c9174d4fa44a1e77e95c887c06 5197300ea90c8ffc1d32c898c4e137b6a74834c769d7be8008fea4b3ca9c5a33505b588fd93fa440 584d00f8c0c11d62bd886037289e5f27cec1039a4c311a04a7cf75b9ed578b840c66993dea65d31a df591ffc290d98d6565e70a1d3d45ae3f0c877c5104d1def8c23a79f38c92731165bfb2a84759f2c 6c07e15ff75e4fe6f99e67dac4fc5ca7bf6cbdf849c44b77f6 EAP-Message = 0x614977256b1dcde1b92a76f3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e0369fb0870007f99580c2a718 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=2, length=132 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061900 State = 0x379da9e0369fb0870007f99580c2a718 Message-Authenticator = 0x1ab17d06723c9f5f8f9bf484468c6dc5 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 127.0.0.1 port 49468 EAP-Message = 0x010303fc1940d8d084a884e20a2a165c46af33618c22000498308204 943082037ca003020102020900a00b0c8b6ee723bb300d06092a864886f70d010105050030818c31 0b300906035504061302434e310b300906035504081302484b310c300a0603550407130365647531 0d300b060355040a1304484b42553127302506092a864886f70d0109011618726f6f744066726775 6573742e686b62752e6564752e686b312a302806035504031321484b425520477565737420434120 636572742028363462697420736572766572293020170d3130303632343033353833335a180f3230 3530303631343033353833335a30818c310b30090603550406 EAP-Message = 0x1302434e310b300906035504081302484b310c300a06035504071303 656475310d300b060355040a1304484b42553127302506092a864886f70d0109011618726f6f7440 667267756573742e686b62752e6564752e686b312a302806035504031321484b4255204775657374 204341206365727420283634626974207365727665722930820122300d06092a864886f70d010101 05000382010f003082010a0282010100c001917da3c962085a616702fa98c2bd794c7edfa3a1f038 258e018a126e736e3a61ae5120b956ab0566a9258b889d66e616e2d702b1a0f5ec79b1b484a9a9ec 5ff3ba49d31895a6073ac132c9aa28f3e9906d0a6e3c24e852 EAP-Message = 0x621586b8db41ce111ebf2befc143a5cc9d562d020594fe407135ec1c 068dd0303eca75e5c5dd9cab898af3e870072ea3eca78602644eea0bac0c5619925b56aba1b1c1fc 4c48fded87cdcf44d1b99a2c1f534e8b88e4a35f9d1ffa8a50cdb402743516a0cbce2a4796459501 875ec225357d4a362202e15ee12a0154f018e5b84a5e5884c268d3154ed41f7b78ea2f6df852e07b dd50a55c26467bcaf75c41d393bc78b27fb5170203010001a381f43081f1301d0603551d0e041604 14c134ca58d9d8f09b9207417630a08266b192ef523081c10603551d230481b93081b68014c134ca 58d9d8f09b9207417630a08266b192ef52a18192a4818f3081 EAP-Message = 0x8c310b300906035504061302434e310b300906035504081302484b31 0c300a06035504071303656475310d300b060355040a1304484b42553127302506092a864886f70d 0109011618726f6f7440667267756573742e686b62752e6564752e686b312a302806035504031321 484b42552047756573742043412063657274202836346269742073657276657229820900a00b0c8b 6ee723bb300c0603551d13040530030101ff300d06092a864886f70d010105050003820101000d81 bb75569e9ce10ee1cc274ce224d6d175d681f14079bdb2953b179dc9e15eedecd08f8d61f1759f3b b4c97458573e0b9b6b6be66954fc48d713a54ad949e99d806a EAP-Message = 0x400957b5cd394c74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e0359eb0870007f99580c2a718 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=3, length=132 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x379da9e0359eb0870007f99580c2a718 Message-Authenticator = 0x48ddac2a23034188ff380052d31d8a44 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 127.0.0.1 port 49468 EAP-Message = 0x010402d6190012c062cd3163799ab42c262a3b39ee4aadeba8ca0584 510b5f850ecbe4afc188b998b5b79ebc112998a4791842e212835761d44b5202634a16bdc8886be5 a2a6ddef1becbbaa64117a58fd73726f412c140197da3a29fc44aa1b67361c18f9f72312826067f6 4edc638e6a8b5511cd2c9eff129e700e0d88cb6de9ef5c6c909025dc37b4abdc9fdc643561bb06b1 e07e30de728a7e8a4dc07dda92896b8975d7907b85b66fedf2623b70b61a7757012cb421a8c76616 0301020d0c00020900808fcc5daaf65ec4b9ed53a13aa5563c3a857d7b01a0935ce18302cbbd8117 bdcee617438d810d33e6737c2b63ad1b1e728d85e9aa9c155d EAP-Message = 0x84c5499240de4a0574ca81181dd71a196f1dccceee978f8380d16b7e 6019d903f2d5ed2428b8649b958dbd4a5c52b8f99989c064eb651266552a0b7eab32727454b2eee7 89c78aee3b00010200802d40d68a213037fdef2a05b0d02557ad19514062a6c2b6b77514fd1c15a1 3933b75408fca1c9a173e2cb20808dc07fffb36fc03e041b17e407ccc97a6c2d7f1f91b3a9e0d248 f2dc467c3aec0912ca55badcf050965c6138dff792352fa2292f92a152149a5f5cf7961a5c1e9656 b7be37b32b22d9f677473e118e41b63b0a8c010017a57998cc2de71d0802f9766a65e11f23cd01db a7580d288f40939c2c03e243e1dfbf8b14f9ac287474fe444e EAP-Message = 0xe026a49e96cdf3c242e82468aaf6e46fc45f16517d36d91a2a014805 0a1d39fb3b83505165efb521155a4cafb52c3ed39d5bb7950f9fd3d4cb6d38e7a790b5ad63064fae c1792f3e5ce8e811f991a2ca0e687146ed2d3d4fce292922c8fb820058f9385703a984f6f34ce14b 9c2919f7efc83e9b3173bdb14403ea336c4ce9a36173ebf7c59142b0fdf2a57dc568453512ddf1a9 aae97bd70550d99c001c62b5265a49aa276f0fc854f8d69c145125020662caac7bcff0f71955c5e5 c0448184b0b0cfbd48409afec8bb1029595b585034991416030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e03499b0870007f99580c2a718 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=4, length=334 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400d01980000000c61603010086100000820080467a2d89b7410f afe4361812717c3cec8717c16174a7e281b953d403a7773e8d6479fb7a0db7ecbd39f8b221bc892c e53c59806567d87532666bf0bb115fd666e64f00c2736933ed590bf8ee24f253bdeecca351ec9a29 c467089d4b1b96afb0e8365fecb17dc727289a21786810c9a85af0bd459190512000905dc6780ca6 ef1403010001011603010030744197a78d5f100a2b1e0dde24bef68f84fe93ac677aeb3d028edcfc 1cbc4e6996be46522959cf1556c5c8386a508b77 State = 0x379da9e03499b0870007f99580c2a718 Message-Authenticator = 0xf65a0c170c026c7e4e0e661823bd744e +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data SSL: adding session 66e05cf10dd059ad56a7d8a36cb50353917b6f4635d6a24b23d44c25fa ea1c00 to cache [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 127.0.0.1 port 49468 EAP-Message = 0x01050041190014030100010116030100304e5c1baf2a1b8d5d2a18b7 c4d1c1a3f22154ee783c7db5fd17ea3e0a7fd2ab6d247705d7edda9f423498bed6aeafbdf9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e03398b0870007f99580c2a718 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=5, length=132 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x379da9e03398b0870007f99580c2a718 Message-Authenticator = 0x12fb97053e91f203df1581c6975b8c01 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 5 to 127.0.0.1 port 49468 EAP-Message = 0x0106002b190017030100201171e1d1767e10f9d06c480a092e9b8ba3 c07b0e05262131dd5705132f367257 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e0329bb0870007f99580c2a718 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=6, length=222 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0206006019001703010020a9d556b45919401ae1e4790740371c1be9 d6ed285273ed06042e3ec0bd020c471703010030a782020930967cc5584d7791eeeb903ef19a6ad8 5588c048606fba479e03a8ad8ee74ef22f1f16a685d6e3f142564c55 State = 0x379da9e0329bb0870007f99580c2a718 Message-Authenticator = 0xd9002ff440753be497004076fb58a195 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - time1 [peap] Got tunnled request EAP-Message = 0x0206000a0174696d6531 server (null) { PEAP: Got tunneled identity of time1 PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to time1 Sending tunneled request EAP-Message = 0x0206000a0174696d6531 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" server inner-tunnel { +- entering group authorize {...} ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 6 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail -%Y%m%d -> /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expan ds to /var/log/radius/radacct/127.0.0.1/auth-detail-20100708 [auth_log] expand: %t -> Thu Jul 8 18:27:34 2010 ++[auth_log] returns ok [sql] expand: %{User-Name} -> time1 [sql] sql_set_user escaped user --> 'time1' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute != 'Cleartext-Password') UNION (SEL ECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = '%{SQL-User-Name}' and attribute = 'Cleartext-Password') ORDER BY id -> (SELECT id, username, attribute, value, op FROM radcheck WHERE usern ame = 'time1' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHERE username = 'time1' and attribute = 'Cleartext-Password') ORDER BY id rlm_sql_mysql: query: (SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'time1' and attribute != 'Cleartext-Password') UNION (SELECT id, username, attribute, aes_decrypt(value,'abc123456def'), op FROM radcheck WHE RE username = 'time1' and attribute = 'Cleartext-Password') ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radrepl y WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE usern ame = 'time1' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'time1' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE user name = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'time1' ORDER BY prior ity rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHE RE username = 'time1' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++? if (!(control:Cleartext-Password)) ?? Evaluating (control:Cleartext-Password) -> TRUE ? Converting !TRUE -> FALSE ++? if (!(control:Cleartext-Password)) -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE expand: %{reply:acct_expiration} -> 29991231 expand: %D -> 20100708 ?? Evaluating ("%{reply:acct_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && ("%{reply:acct_expiration}" < "%D") ) -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) ?? Evaluating (reply:acct_expiration) -> TRUE ?? Evaluating (reply:1st_login_date) -> TRUE ?? Evaluating (reply:ticket_expiration) -> TRUE expand: %{reply:1st_login_date} -> 20100601 ?? Evaluating ("%{reply:1st_login_date}" != "29991231") -> TRUE expand: %{reply:ticket_expiration} -> 20100830 expand: %D -> 20100708 ?? Evaluating ("%{reply:ticket_expiration}" < "%D") -> FALSE ++? elsif ((reply:acct_expiration) && (reply:1st_login_date) && (reply:ticket_e xpiration) && ("%{reply:1st_login_date}" != "29991231") && ("%{reply:ticket_expi ration}" < "%D") ) -> FALSE rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{ User-Name}'' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNam e='time1' sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE UserNa me='time1'}' [noreset_time_counter] sql_xlat [noreset_time_counter] expand: %{User-Name} -> time1 [noreset_time_counter] sql_set_user escaped user --> 'time1' [noreset_time_counter] expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE U serName='time1' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='time 1' [noreset_time_counter] expand: /var/log/radius/sqltrace.sql -> /var/log/radius/ sqltrace.sql rlm_sql (sql): Reserving sql socket id: 3 rlm_sql_mysql: query: SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName=' time1' [noreset_time_counter] sql_xlat finished rlm_sql (sql): Released sql socket id: 3 [noreset_time_counter] expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct W HERE UserName='time1'} -> 205 rlm_sqlcounter: (Check item - counter) is less than zero rlm_sqlcounter: Rejected user time1, check_item=20, counter=205 ++[noreset_time_counter] returns reject ++? if (reject) ? Evaluating (reject) -> TRUE ++? if (reject) -> TRUE ++- entering if (reject) {...} +++[control] returns reject ++- if (reject) returns reject Invalid user (rlm_sqlcounter: Maximum never usage time reached): [time1/<via Aut h-Type = EAP>] (from client localhost port 0 cli 02-00-00-00-00-01 via TLS tunne l) } # server inner-tunnel [peap] Got tunneled reply code 3 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Reply-Message = "Your maximum never usage time has been reached" [peap] Got tunneled reply RADIUS code 3 1st_login_date := "20100601" acct_expiration := "29991231" ticket_days := "90" ticket_expiration := "20100830" Reply-Message = "Your maximum never usage time has been reached" [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 6 to 127.0.0.1 port 49468 EAP-Message = 0x0107003b19001703010030d0af2dcdbaada51c12d0570f41e8542218 7c12e87263aa128b7647209c78495a9ebc2ae2ade479af15debdfbed77aa3f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x379da9e0319ab0870007f99580c2a718 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 49468, id=7, length=222 User-Name = "time1" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02070060190017030100202178f5d5c8f7282c6e2609da3fec65309e f28ebeadf1dce71e775f3bdab51a1817030100300f13973ec6c006332d406b716cefe650fe7a9462 eed07219b551403dbec4b6d042a2025fe07f3b07314212ce9f57a4b9 State = 0x379da9e0319ab0870007f99580c2a718 Message-Authenticator = 0x9976397d6fffc38a9e78034df8c3a0d5 +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "time1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. SSL: Removing session 66e05cf10dd059ad56a7d8a36cb50353917b6f4635d6a24b23d44c25 faea1c00 from the cache [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [time1/<via Auth-Type = EAP>] (from client localhost port 0 cli 02-00-00-00-00-01) Using Post-Auth-Type Reject +- entering group REJECT {...} ++- group REJECT returns noop Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 7 to 127.0.0.1 port 49468 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 0 with timestamp +2 Cleaning up request 1 ID 1 with timestamp +2 Cleaning up request 2 ID 2 with timestamp +2 Cleaning up request 3 ID 3 with timestamp +2 Cleaning up request 4 ID 4 with timestamp +2 Cleaning up request 5 ID 5 with timestamp +2 Cleaning up request 6 ID 6 with timestamp +2 Waking up in 0.9 seconds. Cleaning up request 7 ID 7 with timestamp +2 Ready to process requests. ----4. ends ------------------------------------------------------------

2 1

User-Name issue and mac based authentication
by Fabien COMBERNOUS 08 Jul '10

08 Jul '10

Hi there, I'm using Free radius for Mac Address authentication. When a use tcpdump on the radius server, the Radius Request packet contains all the mac Address. But in the "radiusd -X" output, the User-Name is truncated. The last digit is erased and so the device is rejected. Any help is appreciated. -- *Fabien COMBERNOUS* /unix system engineer/ www.kezia.com <http://www.kezia.com/> *Tel: +33 (0) 467 992 986* Kezia Group

2 2

DHCP server will not send DHCP-Boot-Filename
by Mark Price 08 Jul '10

08 Jul '10

Tested with 2.1.9 and latest 2.1.x from git Compile options: --with-dhcp --prefix=/usr/local/freeradius dictionary.dhcp enabled in dictionary configuration below client is gPXE Etherboot My understanding is that the DHCP server should feed DHCP-Boot-Filename in the ACK response to client and this is the way I've done the configuration. Note that this should show in the dhcp header response sent to client. DHCP-Boot-File-Name parameter does work, however it is an 'option' later in the DHCP packet, and not the same thing as DHCP-Boot-Filename in the header. Also it seems that DHCP responses in header such as DHCP-Your-IP-Address do not show up in radiusd debug output, even though they are sent to client (confirmed with tcpdump). Any suggestions or pointers would be appreciated. config: server dhcp { listen { ipaddr = 209.170.148.3 port = 67 type = dhcp } dhcp DHCP-Discover { update reply { DHCP-Message-Type = DHCP-Offer } update reply { DHCP-Subnet-Mask = 255.255.255.252 DHCP-Domain-Name-Server = 208.79.80.18 DHCP-Gateway-IP-Address = 209.170.148.41 DHCP-IP-Address-Lease-Time = 86400 DHCP-Your-IP-Address = 209.170.148.42 } ok } dhcp DHCP-Request { update reply { DHCP-Message-Type = DHCP-Ack } update reply { DHCP-Subnet-Mask = 255.255.255.252 DHCP-Domain-Name-Server = 208.79.80.18 DHCP-Gateway-IP-Address = 209.170.148.41 DHCP-IP-Address-Lease-Time = 86400 DHCP-Your-IP-Address = 209.170.148.42 DHCP-Server-Host-Name = 209.170.148.3 DHCP-Boot-Filename = pxeboot } ok } dhcp { # send a DHCP NAK. reject } } debug output from radiusd -X -xx: Received DHCP-Discover of id 001752fc from 209.170.148.41:67 to 209.170.148.3:67 01 01 06 01 00 17 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d1 aa 94 29 aa 00 00 17 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53 63 61 11 00 81 fd d6 45 00 bd 23 db 30 be e0 70 fa a0 c7 d5 3d 07 01 aa 00 00 17 52 fc af 28 b1 05 01 10 ec 81 39 13 01 01 17 01 01 15 01 01 11 01 01 12 01 01 18 01 01 23 01 01 22 01 01 19 01 01 21 01 01 10 01 02 35 01 01 39 02 05 c0 5d 02 00 00 5e 03 01 02 01 3c 20 50 58 45 43 6c 69 65 6e 74 3a 41 72 63 68 3a 30 30 30 30 30 3a 55 4e 44 49 3a 30 30 32 30 30 31 37 0d 01 03 06 07 0c 0f 11 2b 3c 42 43 af cb ff DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 1 DHCP-Transaction-Id = 1528572 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 209.170.148.41 DHCP-Client-Hardware-Address = aa:00:00:17:52:fc DHCP-UUID/GUID = 0x0081fdd64500bd23db30bee070faa0c7d5 DHCP-Client-Identifier = aa:00:00:17:52:fc DHCP-Message-Type = DHCP-Discover DHCP-DHCP-Maximum-Msg-Size = 1472 DHCP-Client-System = 0x0000 DHCP-Client-NDI = 0x010201 DHCP-Vendor-Class-Identifier = "PXEClient:Arch:00000:UNDI:002001" DHCP-Parameter-Request-List = DHCP-Subnet-Mask DHCP-Parameter-Request-List = DHCP-Router-Address DHCP-Parameter-Request-List = DHCP-Domain-Name-Server DHCP-Parameter-Request-List = DHCP-Log-Server DHCP-Parameter-Request-List = DHCP-Hostname DHCP-Parameter-Request-List = DHCP-Domain-Name DHCP-Parameter-Request-List = DHCP-Root-Path DHCP-Parameter-Request-List = DHCP-Vendor DHCP-Parameter-Request-List = DHCP-Class-Identifier DHCP-Parameter-Request-List = DHCP-TFTP-Server-Name DHCP-Parameter-Request-List = DHCP-Boot-File-Name DHCP-Parameter-Request-List = 175 DHCP-Parameter-Request-List = 203 Wed Jul 7 14:00:26 2010 : Info: server dhcp { Wed Jul 7 14:00:26 2010 : Debug: Trying sub-section dhcp DHCP-Discover {...} Wed Jul 7 14:00:26 2010 : Info: +- entering group DHCP-Discover {...} Wed Jul 7 14:00:26 2010 : Info: ++[reply] returns noop Wed Jul 7 14:00:26 2010 : Info: ++[reply] returns noop Wed Jul 7 14:00:26 2010 : Info: ++[ok] returns ok Wed Jul 7 14:00:26 2010 : Info: } # server dhcp Sending DHCP-Offer of id 001752fc from 209.170.148.3:67 to 209.170.148.41:67 DHCP-Subnet-Mask = 255.255.255.252 DHCP-Domain-Name-Server = 208.79.80.18 DHCP-IP-Address-Lease-Time = 86400 0: 02 01 06 00 00 17 52 fc 00 00 00 00 00 00 00 00 16: d1 aa 94 2a 00 00 00 00 d1 aa 94 29 aa 00 00 17 32: 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 112: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 224: 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53 63 240: 35 01 02 01 04 ff ff ff fc 06 04 d0 4f 50 12 33 256: 04 00 01 51 80 ff 00 00 00 00 00 00 00 00 00 00 272: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 288: 00 00 00 00 00 00 00 00 00 00 00 00 Wed Jul 7 14:00:26 2010 : Info: Finished request 0. Wed Jul 7 14:00:26 2010 : Info: Cleaning up request 0 ID 1528572 with timestamp +16 Wed Jul 7 14:00:26 2010 : Debug: Going to the next request Wed Jul 7 14:00:26 2010 : Info: Ready to process requests. Received DHCP-Request of id 001752fc from 209.170.148.41:67 to 209.170.148.3:67 01 01 06 01 00 17 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d1 aa 94 29 aa 00 00 17 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53 63 61 11 00 81 fd d6 45 00 bd 23 db 30 be e0 70 fa a0 c7 d5 3d 07 01 aa 00 00 17 52 fc af 28 b1 05 01 10 ec 81 39 13 01 01 17 01 01 15 01 01 11 01 01 12 01 01 18 01 01 23 01 01 22 01 01 19 01 01 21 01 01 10 01 02 32 04 d1 aa 94 2a 35 01 03 39 02 05 c0 5d 02 00 00 5e 03 01 02 01 3c 20 50 58 45 43 6c 69 65 6e 74 3a 41 72 63 68 3a 30 30 30 30 30 3a 55 4e 44 49 3a 30 30 32 30 30 31 37 0d 01 03 06 07 0c 0f 11 2b 3c 42 43 af cb ff DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 1 DHCP-Transaction-Id = 1528572 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 209.170.148.41 DHCP-Client-Hardware-Address = aa:00:00:17:52:fc DHCP-UUID/GUID = 0x0081fdd64500bd23db30bee070faa0c7d5 DHCP-Client-Identifier = aa:00:00:17:52:fc DHCP-Requested-IP-Address = 209.170.148.42 DHCP-Message-Type = DHCP-Request DHCP-DHCP-Maximum-Msg-Size = 1472 DHCP-Client-System = 0x0000 DHCP-Client-NDI = 0x010201 DHCP-Vendor-Class-Identifier = "PXEClient:Arch:00000:UNDI:002001" DHCP-Parameter-Request-List = DHCP-Subnet-Mask DHCP-Parameter-Request-List = DHCP-Router-Address DHCP-Parameter-Request-List = DHCP-Domain-Name-Server DHCP-Parameter-Request-List = DHCP-Log-Server DHCP-Parameter-Request-List = DHCP-Hostname DHCP-Parameter-Request-List = DHCP-Domain-Name DHCP-Parameter-Request-List = DHCP-Root-Path DHCP-Parameter-Request-List = DHCP-Vendor DHCP-Parameter-Request-List = DHCP-Class-Identifier DHCP-Parameter-Request-List = DHCP-TFTP-Server-Name DHCP-Parameter-Request-List = DHCP-Boot-File-Name DHCP-Parameter-Request-List = 175 DHCP-Parameter-Request-List = 203 Wed Jul 7 14:00:27 2010 : Info: server dhcp { Wed Jul 7 14:00:27 2010 : Debug: Trying sub-section dhcp DHCP-Request {...} Wed Jul 7 14:00:27 2010 : Info: +- entering group DHCP-Request {...} Wed Jul 7 14:00:27 2010 : Info: ++[reply] returns noop Wed Jul 7 14:00:27 2010 : Info: ++[reply] returns noop Wed Jul 7 14:00:27 2010 : Info: ++[ok] returns ok Wed Jul 7 14:00:27 2010 : Info: } # server dhcp Sending DHCP-Ack of id 001752fc from 209.170.148.3:67 to 209.170.148.41:67 DHCP-Subnet-Mask = 255.255.255.252 DHCP-Domain-Name-Server = 208.79.80.18 DHCP-IP-Address-Lease-Time = 86400 0: 02 01 06 00 00 17 52 fc 00 00 00 00 00 00 00 00 16: d1 aa 94 2a 00 00 00 00 d1 aa 94 29 aa 00 00 17 32: 52 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 112: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 224: 00 00 00 00 00 00 00 00 00 00 00 00 63 82 53 63 240: 35 01 05 01 04 ff ff ff fc 06 04 d0 4f 50 12 33 256: 04 00 01 51 80 ff 00 00 00 00 00 00 00 00 00 00 272: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 288: 00 00 00 00 00 00 00 00 00 00 00 00 Wed Jul 7 14:00:27 2010 : Info: Finished request 1. Wed Jul 7 14:00:27 2010 : Info: Cleaning up request 1 ID 1528572 with timestamp +17 Wed Jul 7 14:00:27 2010 : Debug: Going to the next request Wed Jul 7 14:00:27 2010 : Info: Ready to process requests. tcpdump -n -A -s 0 -vvv -i eth0: 14:00:26.362344 IP (tos 0x0, ttl 255, id 264, offset 0, flags [none], proto UDP (17), length 404) 209.170.148.41.67 > 209.170.148.3.67: [udp sum ok] BOOTP/DHCP, Request from aa:00:00:17:52:fc, length 376, hops 1, xid 0x1752fc, Flags [none] (0x0000) Gateway-IP 209.170.148.41 Client-Ethernet-Address aa:00:00:17:52:fc Vendor-rfc1048 Extensions Magic Cookie 0x63825363 GUID Option 97, length 17: 0.129.253.214.69.0.189.35.219.48.190.224.112.250.160.199.213 Client-ID Option 61, length 7: ether aa:00:00:17:52:fc T175 Option 175, length 40: 2969895184,3967891731,16848641,18153729,285278482,16848897,19071233,570491161,16851201,17826050 DHCP-Message Option 53, length 1: Discover MSZ Option 57, length 2: 1472 ARCH Option 93, length 2: 0 NDI Option 94, length 3: 1.2.1 Vendor-Class Option 60, length 32: "PXEClient:Arch:00000:UNDI:002001" Parameter-Request Option 55, length 13: Subnet-Mask, Default-Gateway, Domain-Name-Server, LOG Hostname, Domain-Name, RP, Vendor-Option Vendor-Class, TFTP, BF, Option 175 Option 203 END Option 255, length 0 E..............).....C.C..^.......R....................)....R...........................................................................................................................................................................................................c.Sca.....E..#.0..p....=......R..(......9..............+<BC...".....!.....5..9...]...^....< PXEClient:Arch:00000:UNDI:0020017 14:00:26.363586 IP (tos 0x0, ttl 64, id 48230, offset 0, flags [none], proto UDP (17), length 328) 209.170.148.3.67 > 209.170.148.41.67: [udp sum ok] BOOTP/DHCP, Reply, length 300, xid 0x1752fc, Flags [none] (0x0000) Your-IP 209.170.148.42 Gateway-IP 209.170.148.41 Client-Ethernet-Address aa:00:00:17:52:fc Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Offer Subnet-Mask Option 1, length 4: 255.255.255.252 Domain-Name-Server Option 6, length 4: 208.79.80.18 Lease-Time Option 51, length 4: 86400 END Option 255, length 0 PAD Option 0, length 0, occurs 38 E..H.f..@..........).C.C.42.......R............*.......)....R...........................................................................................................................................................................................................c.Sc5...........OP.3...Q........................................ 14:00:27.373492 IP (tos 0x0, ttl 255, id 266, offset 0, flags [none], proto UDP (17), length 410) 209.170.148.41.67 > 209.170.148.3.67: [udp sum ok] BOOTP/DHCP, Request from aa:00:00:17:52:fc, length 382, hops 1, xid 0x1752fc, Flags [none] (0x0000) Gateway-IP 209.170.148.41 Client-Ethernet-Address aa:00:00:17:52:fc Vendor-rfc1048 Extensions Magic Cookie 0x63825363 GUID Option 97, length 17: 0.129.253.214.69.0.189.35.219.48.190.224.112.250.160.199.213 Client-ID Option 61, length 7: ether aa:00:00:17:52:fc T175 Option 175, length 40: 2969895184,3967891731,16848641,18153729,285278482,16848897,19071233,570491161,16851201,17826050 Requested-IP Option 50, length 4: 209.170.148.42 DHCP-Message Option 53, length 1: Request MSZ Option 57, length 2: 1472 ARCH Option 93, length 2: 0 NDI Option 94, length 3: 1.2.1 Vendor-Class Option 60, length 32: "PXEClient:Arch:00000:UNDI:002001" Parameter-Request Option 55, length 13: Subnet-Mask, Default-Gateway, Domain-Name-Server, LOG Hostname, Domain-Name, RP, Vendor-Option Vendor-Class, TFTP, BF, Option 175 Option 203 END Option 255, length 0 E.... .........).....C.C...7......R....................)....R...........................................................................................................................................................................................................c.Sca.....E..#.0..p....=......R..(......9....................+<BC...!.....2....*5..9...]...^....< PXEClient:Arch:00000:UNDI:0020017 14:00:27.374470 IP (tos 0x0, ttl 64, id 48231, offset 0, flags [none], proto UDP (17), length 328) 209.170.148.3.67 > 209.170.148.41.67: [udp sum ok] BOOTP/DHCP, Reply, length 300, xid 0x1752fc, Flags [none] (0x0000) Your-IP 209.170.148.42 Gateway-IP 209.170.148.41 Client-Ethernet-Address aa:00:00:17:52:fc Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: ACK Subnet-Mask Option 1, length 4: 255.255.255.252 Domain-Name-Server Option 6, length 4: 208.79.80.18 Lease-Time Option 51, length 4: 86400 END Option 255, length 0 PAD Option 0, length 0, occurs 38 E..H.g..@..........).C.C.4/.......R............*.......)....R...........................................................................................................................................................................................................c.Sc5...........OP.3...Q........................................ -- Mark Price

2 3

How to create my own VSAs in FreeRADIUS with JRadius (rlm_jradius module)?
by Karuna G. Kumar 08 Jul '10

08 Jul '10

Hi, I am using FreeRADIUS and JRadius. Where and how to configure my own VSAs to use in request and response packets? Also, please tell me how to configure sub-attributes for VSAs. Thanks in advance. -Karun.

2 1

RadSQLRelay
by Marius Pesé 08 Jul '10

08 Jul '10

Hi everyone, We are still struggling to get our FreeRadius2 servers running on CentOS5.5 to relay accounting packages to one another. Right now I have one FR2 server with a local mySQL database and one additional machine just running mysqld. The FR2 machine writes it's own database and the textfile with the queries without problems. However if we start radsqlrelay (radsqlrelay -d mysql -b freeradius -h 196.25.xxx.xxx -u root -p xxxx /var/log/radius/radacct/relay/sql-relay) it opens quite a few connections to the secondary database, but does not seem to use the text file with the queries, also it does not give any debug output, regardless of the -x option. Tried both path and path+file for the filename, hostname and IP for the the secondary database system. Without debugging output fairly hard to figure out. Anybody else know this problem? Regards Marius

3 4

radius dont work
by Aziz YÜCELEN 08 Jul '10

08 Jul '10

Hi I am using freeradius version 2.1.4 and I want to set up config to eap TTLS using users and clients file but didnt work.Please help me.Thanks. ***************OUTPUT************************************Finished request 18.Going to the next requestWaking up in 2.0 seconds.Cleaning up request 17 ID 18 with timestamp +75Waking up in 2.9 seconds.rad_recv: Access-Request packet from host 10.1.1.252 port 1206, id=20, length=183 User-Name = "deneme" NAS-IP-Address = 10.1.1.252 NAS-Port = 0 Called-Station-Id = "00-30-4F-44-3D-C1" Calling-Station-Id = "00-18-DE-88-62-77" NAS-Identifier = "WirelessAccessPoint" Framed-MTU = 1380 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0211002219001703010017a5491ed47f0de82246939132f8766cf3c1a85f8c211be5 State = 0x56c2eb4850d3f233efbb27b16d1adb57 Message-Authenticator = 0x1ea576935b901d2c1f156615504ed0da+- entering group authorize {...}++[preprocess] returns ok++[chap] returns noop++[mschap] returns noop[suffix] No '@' in User-Name = "deneme", looking up realm NULL[suffix] No such realm "NULL"++[suffix] returns noop[eap] EAP packet type response id 17 length 34[eap] Continuing tunnel setu! p.++[eap] returns okFound Auth-Type = EAP+- entering group authenticate {...}[eap] Request found, released from the list[eap] EAP/peap[eap] processing type peap[peap] processing EAP-TLS[peap] eaptls_verify returned 7 [peap] Done initial handshake[peap] eaptls_process returned 7 [peap] EAPTLS_OK[peap] Session established. Decoding tunneled attributes.[peap] Identity - deneme[peap] Got tunneled request EAP-Message = 0x0211000b0164656e656d65server { PEAP: Got tunneled identity of deneme PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to denemeSending tunneled request EAP-Message = 0x0211000b0164656e656d65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "deneme"server inner-tunnel {No authenticate method (Auth-Type) configuration found for the request: Rejecting the userFailed to authenticate the user.} # server inner-tunnel[peap] Got tunneled reply code 3[peap] Got tunneled reply RADIUS code 3[peap] Tunneled authentication was rejected.[peap! ] FAILURE++[eap] returns handledSending Access-Challenge of id 20 to 1 0.1.1.252 port 1206 EAP-Message = 0x011200261900170301001b3f825aee84e1fd23b0089c976f25f2f4054e5c93627e072882688f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x56c2eb4851d0f233efbb27b16d1adb57Finished request 19.Going to the next requestWaking up in 1.9 seconds.Cleaning up request 18 ID 19 with timestamp +78Waking up in 2.9 seconds.rad_recv: Access-Request packet from host 10.1.1.252 port 1206, id=21, length=187 User-Name = "deneme" NAS-IP-Address = 10.1.1.252 NAS-Port = 0 Called-Station-Id = "00-30-4F-44-3D-C1" Calling-Station-Id = "00-18-DE-88-62-77" NAS-Identifier = "WirelessAccessPoint" Framed-MTU = 1380 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x021200261900170301001bd0f786fe5ec27d325f117cb1c6314a2fc09664e18d31038aaa2a5f State = 0x56c2eb4851d0f233efbb27b16d1adb57 Message-Authenticator = 0xe4dd7f51a3fd9548338084267728d316+- entering group authorize {...}++[preprocess] returns ok++[chap] returns noop++[mschap] returns noop[suffix] No '@' in User! -Name = "deneme", looking up realm NULL[suffix] No such realm "NULL"++[suffix] returns noop[eap] EAP packet type response id 18 length 38[eap] Continuing tunnel setup.++[eap] returns okFound Auth-Type = EAP+- entering group authenticate {...}[eap] Request found, released from the list[eap] EAP/peap[eap] processing type peap[peap] processing EAP-TLS[peap] eaptls_verify returned 7 [peap] Done initial handshake[peap] eaptls_process returned 7 [peap] EAPTLS_OK[peap] Session established. Decoding tunneled attributes.[peap] Received EAP-TLV response.[peap] Had sent TLV failure. User was rejected earlier in this session.[eap] Handler failed in EAP/peap[eap] Failed in EAP select++[eap] returns invalidFailed to authenticate the user.Using Post-Auth-Type Reject+- entering group REJECT {...}[attr_filter.access_reject] expand: %{User-Name} -> deneme attr_filter: Matched entry DEFAULT at line 11++[attr_filter.access_reject] returns updatedDelaying reject of request 20 for 1 secondsG! oing to the next requestWaking up in 0.9 seconds.Sending delayed rejec t for request 20Sending Access-Reject of id 21 to 10.1.1.252 port 1206 EAP-Message = 0x04120004 Message-Authenticator = 0x00000000000000000000000000000000Waking up in 0.9 seconds.Cleaning up request 19 ID 20 with timestamp +81Waking up in 3.9 seconds. ************EAP.conf********************# -*- text -*-#### eap.conf -- Configuration for EAP types (PEAP, TTLS, etc.)#### $Id$ ######################################################################## eap { # default_eap_type = ttls # A list is maintained to correlate EAP-Response # packets with EAP-Request packets. After a # configurable length of time, entries in the list # expire, and are deleted. # timer_expire = 60 ignore_unknown_eap_types = no # Cisco AP1230B firmware 12.2(13)JA1 has a bug. When given # a User-Name attribute in an Access-Accept, it copies one # more byte than it should. # # We can work around it by configurably adding an extra # zero byte. cisco_accounting_username_bug = no # # Help prevent DoS attacks by limiting the number of # sessions that the server is tracking. Most systems # can handle ~30 EAP sessions/s, so the default limit # of 2048 is more than enough. max_sessions = 2048 # Supported EAP-types # # We do NOT recommend using EAP-MD5 authentication # for wireless connections. It is insecure, and does # not provide for dynamic WEP keys. # md5 { } # Cisco LEAP # leap { } # Generic Token Card. gtc { # The default challenge, which many clients # ignore.. #challenge = "Password: " auth_type = PAP } ## EAP-TLS # # See raddb/certs/README for additional comments # on certificates. # http://www.dslreports.com/forum/remark,9286052~mode=flat # tls { # # These is used to simplify later configurations. # certdir = ${confdir}/certs cadir = ${confdir}/certs private_key_password = 123456 private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem CA_file = ${cadir}/ca.pem dh_file = ${certdir}/dh random_file = ${certdir}/random # fragment_size = 1024 # include_length = yes # check_crl = yes # # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd" # check_cert_cn = %{User-Name} # cipher_list = "DEFAULT" # make_cert_command = "${certdir}/bootstrap" cache { # # Enable it. The default is "no". # Deleting the entire "cache" subsection # Also disables caching. # # You can disallow resumption for a # particular user by adding the following # attribute to the control item list: # # Allow-Session-Resumption = No # # If "enable = no" below, you CANNOT # enable resumption for just one user # by setting the above attribute to "yes". # enable = no # # Lifetime of the cached entries, in hours. # The sessions will be deleted after this # time. # lifetime = 24 # hours # # The maximum number of entries in the # cache. Set to "0" for "infinite". # # This could be set to the number of users # who are logged in... which can be a LOT. # max_entries = 255 } } ttls { # The tunneled EAP session needs a default # EAP type which is separate from the one for # the non-tunneled EAP module. Inside of the # TTLS tunnel, we recommend using EAP-MD5. # If the request does not contain an EAP # conversation, then this configuration entry # is ignored. default_eap_type = md5 # allowed values: {no, yes} copy_request_to_tunnel = no # allowed values: {no, yes} use_tunneled_reply = no virtual_server = "inner-tunnel" } peap { # The tunneled EAP session needs a default # EAP type which is separate from the one for # the non-tunneled EAP module. Inside of the # PEAP tunnel, we recommend using MS-CHAPv2, # as that is the default type supported by # Windows clients. default_eap_type = mschapv2 # the PEAP module also has these configuration # items, which are the same as for TTLS. copy_request_to_tunnel = no use_tunneled_reply = no # When the tunneled session is proxied, the # home server may not understand EAP-MSCHAP-V2. # Set this entry to "no" to proxy the tunneled # EAP-MSCHAP-V2 as normal MSCHAPv2. # proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } mschapv2 { } } ***************** inner-tunnel ***********# -*- text -*-######################################################################## This is a virtual server that handles *only* inner tunnel# requests for EAP-TTLS and PEAP types.## $Id$####################################################################### server inner-tunnel {authorize { suffix unix update control { Proxy-To-Realm := LOCAL } eap { ok = return } files pap chap mschap# IPASS # ntdomain # See "Authorization Queries" in sql.conf# sql # # If you are using /etc/smbpasswd, and are also doing # mschap authentication, the un-comment this line, and # configure the 'etc_smbpasswd' module, above.# etc_smbpasswd # # The ldap module will set Auth-Type to LDAP if it has not # already been set# ldap # # Enforce daily limits on time spent logged in.# daily # # Use the checkval module# checkval expiration logintime} # Authentication.authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # # Most people want CHAP authentication # A back-end database listed in the 'authorize' section # MUST supply a CLEAR TEXT password. Encrypted passwords # won't work. Auth-Type CHAP { chap } # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # Pluggable Authentication Modules.# pam # # See 'man getpwent' for information on how the 'unix' # module checks the users password. Note that packets # containing CHAP-Password attributes CANNOT be authenticated # against /etc/passwd! See the FAQ for details. # #unix # Uncomment it if you want to use ldap for authentication # # Note that this means "check plain-text password against # the ldap database", which means that EAP won't work, # as it does not supply a plain-text password.# Auth-Type LDAP {# ldap# } # # Allow EAP authentication. eap} ######################################################################## There are no accounting requests inside of EAP-TTLS or PEAP# tunnels.####################################################################### # Session database, used for checking Simultaneous-Use. Either the radutmp # or rlm_sql module can handle this.# The rlm_sql module is *much* fastersession { radutmp # # See "Simultaneous Use Checking Queries" in sql.conf# sql} # Post-Authentication# Once we KNOW that the user has been authenticated, there are# additional steps we can take.post-auth { # Note that we do NOT assign IP addresses here. # If you try to assign IP addresses for EAP authentication types, # it WILL NOT WORK. You MUST use DHCP. # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. reply_log # # After authenticating the user, do another SQL query. # # See "Authentication Logging Queries" in sql.conf# sql # # Instead of sending the query to the SQL server, # write it into a log file. ## sql_log # # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. ## ldap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # # Add the ldap module name (or instance) if you have set # 'edir_account_policy_check = yes' in the ldap module configuration # Post-Auth-Type REJECT { attr_filter.access_reject } } ## When the server decides to proxy a request to a home server,# the proxied request is first passed through the pre-proxy# stage. This stage can re-write the request, or decide to# cancel the proxy.## Only a few modules currently have this method.#pre-proxy {# attr_rewrite # Uncomment the following line if you want to change attributes # as defined in the preproxy_users file.# files # Uncomment the following line if you want to filter requests # sent to remote servers based on the rules defined in the # 'attrs.pre-proxy' file.# attr_filter.pre-proxy # If you want to have a log of packets proxied to a home # server, un-comment the following line, and the # 'detail pre_proxy_log' section, above. pre_proxy_log} ## When the server receives a reply to a request it proxied# to a home server, the request may be massaged here, in the# post-proxy stage.#post-proxy { # If you want to have a log of replies from a home server, # un-comment the following line, and the 'detail post_proxy_log' # section, above. post_proxy_log # attr_rewrite # Uncomment the following line if you want to filter replies from # remote proxies based on the rules defined in the 'attrs' file.# attr_filter.post-proxy # # If you are proxying LEAP, you MUST configure the EAP # module, and you MUST list it here, in the post-proxy # stage. # # You MUST also use the 'nostrip' option in the 'realm' # configuration. Otherwise, the User-Name attribute # in the proxied request will not match the user name # hidden inside of the EAP packet, and the end server will # reject the EAP request. # eap ## Post-Proxy-Type Fail {# detail# } } } # inner-tunnel server block _________________________________________________________________ Windows Live Hotmail: Arkadaşlarınız Facebook'taki güncellemelerinizi doğrudan Hotmail®'den alır. http://www.microsoft.com/windows/windowslive/see-it-in-action/social-networ…

2 9

Re: ntlm_auth fails for none domain
by John 08 Jul '10

08 Jul '10

Sorry. I did not set the 'xjtu' in the first time. But I set 'xjtu' after that. Pls see the second mail I wrote. I put ntlm_auth line to file 'mschap'. The attached file is my 'mschap' and the related debug info. --- 10年7月5日，周一, Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> 写道：发件人: Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> 主题: Re: ntlm_auth fails for none domain 收件人: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> 日期: 2010年7月5日,周一,下午4:53 Hi, no...you havent added it. look, heres the debug you supplied > It is the related part in configuration file: > ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain:-xjtu} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" > > > It is debug info: > [mschap] Told to do MS-CHAPv2 for hhe with NT-Password > [mschap] No NT-Domain was found in the User-Name. > [mschap] expand: --domain=%{mschap:NT-Domain} -> --domain= ^^^^^^^^^^^^^^^^^^^^^^^^^^^ where is xjtu mentioned there? is isnt. WHERE did you put the ntlm_auth line? alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

freeradius 2.1.9 segfault
by Fred MAISON 07 Jul '10

07 Jul '10

Hi all, I found a segfault on radiusd in dmesg. This production server has been installed since 2010/06/03 with no problems. CentOS release 5.5 (Final) radiusd: FreeRADIUS Version 2.1.9, for host x86_64-redhat-linux-gnu, built on Jun 2 2010 at 22:11:51 radiusd[5198]: segfault at 0000000000000038 rip 000000000040fde8 rsp 00007fff3b994e50 error 4 Unfortunately, I have not been able to find the date of the issue ... Does this seems to you a known issue ? If not, what may I do to further investigate ? Best regards Fred MAISON

2 1