- Freeradius-Users - lists.freeradius.org

Cisco ASA set static IP via Radius
by Marki 05 Oct '21

05 Oct '21

Hello, Would you know how to set a static IP address for a remote access connection on Cisco ASA? I tried using standard reply attributes "Framed-IP-Address" and "Framed-IP-Netmask", but it's just ignoring those without a specific error. Looking at table 34-2 here: https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/gene… this comes as no surprise as they mention an attribute called "IETF-Radius-Framed-IP-Address" but don't associate it to an attribute number. I have looked at /usr/share/freeradius/dictionary.cisco.asa but don't find anything that looks appropriate. It can't be that difficult setting a static IP, there is just no documentation anywhere. Surely someone has done this before? Thanks, Marki

1 1

Freeradius configuration examples for switch dynamic ACLs.
by CpServiceSPb 03 Oct '21

03 Oct '21

There is Freeradius 3.0.23 on Ubuntu 18.04LTS x64 and some HPE and Mikrotik managed switches with HP-NAS-Filter-Rule and Mikrotik-Switching-Filter Radius attributes (rfc4849) supporting. I want to restrict src-address for each switch physical port after success authentication, for example: - switch port 1, MAC a1:b1:c1:d1:e1:f1 - allowing src IP is 192.168.0.20 only, all other IPs are denied; - switch port 2, MAC a2:b2:c2:d2:e2:f2 - allowing src IP is 192.168.0.30 only, all other IPs are denied; - switch ports 3-16, MAC a3:b3:c3:d3:e3:f3 - allowing src IP is 192.168.0.40 only, all other IPs are denied. May somebody tell where, which configuration files, should some attributes looks like HP-NAS-Filter-Rule = "allow port 1 MAC a1:b1:c1:d1:e1:f1 src-IP 192.168.0.20 dst-IP any" HP-NAS-Filter-Rule += "allow port2 MAC a2:b2:c2:d2:e2:f2 src-IP 192.168.0.30 dst-IP any" HP-NAS-Filter-Rule += "allow port3 MAC a3:b3:c3:d3:e3:f3 src-IP 192.168.0.30 dst-IP any" .... NAS-Filter-Rule += "allow port16 MAC a3:b3:c3:d3:e3:f3 src-IP 192.168.0.30 dst-IP any" to be added to ? And what format is it ?

2 1

FreeRadius LDAP connection to Google Workspce
by Benjamin Diehl 01 Oct '21

01 Oct '21

I am running into an issue with connecting to Google LDAP service (1), oddly enough if I change it from ldaps://ldap.google.com:636 to just ldap://ldap.xxxxxxxxxx it will “connect” but it will change the port to 389. (2) When its on the ldap version it will run but says it fails - ldap: ERROR: Failed performing search: Confidentiality required (1) rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 TLS: can't connect: (unknown error code). rlm_ldap (ldap): Bind with admin(a)foundationacademy.net to ldaps://ldap.google.com:636 failed: Can't contact LDAP server rlm_ldap (ldap): Opening connection failed (0) rlm_ldap (ldap): Removing connection pool /etc/freeradius/3.0/mods-enabled/ldap[8]: Instantiation failed for module "ldap" (2) rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = fail (0) } # authorize = fail (0) Invalid user (ldap: Failed performing search: Confidentiality required): I have included the full code below. (1) root@FreeRadius:~# freeradius -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/files including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm foundationacademy.net { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 172.16.13.29 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com" identity = "admin(a)foundationacademy.net" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=foundationacademy,dc=net" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀ ÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 TLS: can't connect: (unknown error code). rlm_ldap (ldap): Bind with admin(a)foundationacademy.net to ldaps://ldap.google.com:636 failed: Can't contact LDAP server rlm_ldap (ldap): Opening connection failed (0) rlm_ldap (ldap): Removing connection pool /etc/freeradius/3.0/mods-enabled/ldap[8]: Instantiation failed for module "ldap"

2 11

Help with FreeRadius Server not binding to auth address
by Benjamin Diehl 01 Oct '21

01 Oct '21

I am trying to create a FreeRadius server that authenticates with Google Workspace, I believe I have gotten everything else set correctly. However, at the end it errors out on Opening IP addresses and Ports } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 Failed binding to auth address 127.0.0.1 port 18120 bound to server inner-tunnel: Address already in use /etc/freeradius/3.0/sites-enabled/inner-tunnel[33]: Error binding to port for 127.0.0.1 port 18120 I have tried a few things to fix the issue but nothing has worked. I have included the full code out put from freeradius -X below. root@FreeRadius:~# freeradius -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/files including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm foundationacademy.net { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 172.16.13.29 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = ldap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldap://ldap.google.com" sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=foundationacademy,dc=net" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀ ÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.google.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:340 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 Failed binding to auth address 127.0.0.1 port 18120 bound to server inner-tunnel: Address already in use /etc/freeradius/3.0/sites-enabled/inner-tunnel[33]: Error binding to port for 127.0.0.1 port 18120

3 7

Version 3.0.24 has been released
by Matthew Newton 30 Sep '21

30 Sep '21

Version 3.0.24 has now been released. Full release notes are on the web site: https://freeradius.org/release_notes/?br=3.0.x&re=3.0.24 This is mainly a bugfix release, with a few new features, for example: - More liberal SQL commands in rlm_sql_map - Dynamic loading of certificates via TLS-Session-Cert-File - Preliminary support for haproxy "PROXY" protocol - Generate more parse errors when we know the config is wrong - Update a few dictionaries The bugfixes include fixing some crashes, SQL query updates, and more. Packaging has been updated to add support for Debian 11 Bullseye. Download from all the usual places: https://packages.networkradius.com/ https://freeradius.org/releases/ ftp://ftp.freeradius.org/pub/freeradius/ https://github.com/FreeRADIUS/freeradius-server/releases/tag/release_3_0_24 The Network RADIUS packages and Docker images have all been built and are available now. -- Matthew

2 1

Windows authentication failed with FreeRadius
by Vinit Bhosle 28 Sep '21

28 Sep '21

Dear Support, I have installed freeradius server 3.0.20 and am using EAP-TLS for authentication. I have installed CA signed certificates. My Android devices, Linux and Mac OS are working fine but windows 10 is not working. It is giving the following error. Please suggest how to resolve this. (7) eap_peap: ERROR: TLS Alert read:fatal:access denied (7) eap_peap: SSL_read Error (7) eap_peap: ERROR: Error in fragmentation logic (7) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094419:SSL routines:ssl3_read_bytes:tlsv1 alert access denied (7) eap_peap: ERROR: [eaptls process] = fail (7) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed Regards Vinit

1 0

Re: FreeRadius Fresh installation 3.0.23 "${dialect}" Reference "${dialect}" not found
by Pizu 27 Sep '21

27 Sep '21

Hi, Videos uploaded here: https://www.transfernow.net/dl/20210927VzhbhVO0 Regards, On Mon, 27 Sept 2021 at 16:16, Pizu <pizpower(a)gmail.com> wrote: > Hi, > > @Marki > So the OS is being installed manually from a usb stick and attached. You > may find the recording of my screen installing the freeradius on a fresh > ubuntu installation. > > The recording is in 2 videos. > > @Alan if you need anything else from me please let me know in the videos > as you can see I am not doing anything special :( > > Regards, > > > > > On Fri, 24 Sept 2021 at 00:58, Marki <jm+freeradiususer(a)roth.lu> wrote: > >> You shouldn't take this personal. >> The golden rule of IT Support is "Everybody lies". >> People mostly do it unwittingly. >> Happens to everyone from time to time, including myself. >> People leave out details in their thought process (hence in their >> support queries) because they think they are unimportant. However since >> things are going bad for them and they ask for support, they shouldn't >> leave out anything beforehand and let the person(s) they are asking for >> help decide what is important and what is not. >> As someone pointed out before, you need to adopt a very systematic >> approach diagnosing this issue since it is very strange indeed. >> "Do you suggest I am lying" does not help. >> Questioning oneself is one of the primary qualities of IT engineers. >> *Something* is clearly interfering with some of your installations. It's >> either some automatic process or it's yourself. >> No insult intended. >> >> On 9/23/2021 11:46 PM, Pizu wrote: >> > Hmm are you suggesting I am lying? Why should I? I need help that is >> why I >> > asked for help. I don't need to lie to get help. >> > >> > I am installing the OS from a USB, formatted with Rufus with Ubuntu >> server >> > iso download from the official site. >> > >> > The VM is being installed by mounting the iso. Same iso. >> > >> > Gn >> > >> > >> > >> > >> > On Thu, 23 Sep 2021, 19:02 Marki, <jm+freeradiususer(a)roth.lu> wrote: >> > >> >> I also doubt that to be the root cause. >> >> I also doubt that replacing the physical server changes anything. >> >> >> >> But if any of it holds true, it will give a nice story ;) >> >> >> >> I suspect OP is not giving all the information of what he is doing / >> >> doing differently in VM and physical server. Just like in August ("I >> did >> >> stuff and it didn't work"[tm]) >> >> >> >> How are you installing the server / VM? Is it all manually? Is there >> any >> >> configuration mgmt / deployment / CI tool involved? >> >> Are you using _exactly_ the same repos both times and _exactly_ the >> same >> >> OS? >> >> Please provide output of "apt-cache policy" and "cat /etc/os-release" >> >> and "uname -a". >> >> >> >> Please stop posting images/screenshots of any command results. Use text >> >> and format it properly. >> >> >> >> _Before_ issuing for example any "ln" commands, have you checked the >> >> contents of the directories you are manipulating? >> >> Check that everything is as it should be before issuing any commands. >> >> Issue the commands. >> >> Then check if they did what they were supposed to do. >> >> >> >> On 9/23/2021 6:27 PM, Kristofer Hallin wrote: >> >>> How on earth can this possibly be different on a physical machine >> >> compared to a virtual? >> >>>> On 23 Sep 2021, at 18:23, Pizu <pizpower(a)gmail.com> wrote: >> >>>> >> >>>> Hi, >> >>>> >> >>>> Yes vm I have no issues. Live setup is on same os version and same >> >>>> freeradius version. >> >>>> >> >>>> Physical server I have issue, tomorrow I am going to try a >> >>>> different physical server as the current one is old and cannot >> install >> >> esxi >> >>>> on it, it's not supported. >> >>>> >> >>>> Will keep you all updated. >> >>>> >> >>>> Thanks & Regards >> >>>> >> >>>>> On Thu, 23 Sep 2021, 16:50 Kristofer Hallin, <kristofer(a)sunet.se> >> >> wrote: >> >>>>> Hi, >> >>>>> >> >>>>> I got curious and started a fresh VM with Ubuntu myself (Ubuntu >> 20.04.2 >> >>>>> LTS). I installed the packages from NetworkRADIUS and symlinked >> >> status, sql >> >>>>> and ldap just like you did. I then changed dialect in sql from >> sqlite >> >> to >> >>>>> mysql and restarted FreeRADIUS without seeing the same issue as you >> do >> >> (TLS >> >>>>> for MySQL, LDAP config etc are out of the scope here). >> >>>>> >> >>>>> The sql configuration now has the following two lines for dialect >> and >> >>>>> driver: >> >>>>> >> >>>>> dialect = "mysql" >> >>>>> driver = "rlm_sql_${dialect}" >> >>>>> >> >>>>> And that was the _only_ change I made to the configuration and it >> >> works. >> >>>>> BR, >> >>>>> /K >> >>>>> >> >>>>> — >> >>>>> Kristofer Hallin >> >>>>> SUNET >> >>>>>> On 23 Sep 2021, 16:17 +0200, Pizu <pizpower(a)gmail.com>, wrote: >> >>>>>> Hi, >> >>>>>> >> >>>>>> This is a formated server, fresh Ubuntu installation and fresh >> >> freeradius >> >>>>>> installation, just did the above mentioned configuration. I.e sym >> >> linked >> >>>>>> the LDAP/SQL/Status mods and site and changed the dialect from >> SQLite >> >> to >> >>>>>> MySQL and driver from null to use the dialect that's all the >> >>>>> configuration. >> >>>>>> I cannot understand what I did wrong here :( The same procedure for >> >> all >> >>>>>> servers.. >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> On Thu, 23 Sep 2021, 16:06 Alan DeKok, <aland(a)deployingradius.com> >> >>>>> wrote: >> >>>>>>> On Sep 23, 2021, at 9:22 AM, Pizu <pizpower(a)gmail.com> wrote: >> >>>>>>>> I am going to format it and install ESXi and will create a VM and >> >>>>> will >> >>>>>>> give >> >>>>>>>> you an update. >> >>>>>>> I suspect what happened is that you broke the configuration, and >> then >> >>>>>>> kept re-installing the packages, hoping that would fix it. >> >>>>>>> >> >>>>>>> The problem is that the packages don't wipe your configuration and >> >>>>>>> install the new ones. That's so you can upgrade the server by >> >>>>> installing >> >>>>>>> the new package, and it won't break a production system. >> >>>>>>> >> >>>>>>> So as always, if you make a change: >> >>>>>>> >> >>>>>>> * test it before the change. Make sure it works >> >>>>>>> >> >>>>>>> * make the change >> >>>>>>> >> >>>>>>> * test it after the change. If it doesn't work, then the problem >> is >> >> the >> >>>>>>> change you made. Don't do anything else until you fix the >> >>>>> configuration. >> >>>>>>> Alan DeKok. >> >>>>>>> >> >>>>>>> >> >>>>>>> - >> >>>>>>> List info/subscribe/unsubscribe? See >> >>>>>>> http://www.freeradius.org/list/users.html >> >>>>>> - >> >>>>>> List info/subscribe/unsubscribe? See >> >>>>> http://www.freeradius.org/list/users.html >> >>>>> - >> >>>>> List info/subscribe/unsubscribe? See >> >>>>> http://www.freeradius.org/list/users.html >> >>>> - >> >>>> List info/subscribe/unsubscribe? See >> >> http://www.freeradius.org/list/users.html >> >>> - >> >>> List info/subscribe/unsubscribe? See >> >> http://www.freeradius.org/list/users.html >> >> - >> >> List info/subscribe/unsubscribe? See >> >> http://www.freeradius.org/list/users.html >> > - >> > List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > >

4 6

Problems starting FreeRadius after 3.0.23 install
by Weisteen Per 27 Sep '21

27 Sep '21

Hi Have just installed Freeradius 3.0.23 on my CentOS 7 test-servers as described in https://networkradius.com/packages/ . I'm not using LDAP so I've skipped that part. I'm also not using radiusd:radiusd as userid:groupid due to administrative naming rules, but got a xxxxrad:xxxxrad as userid:groupid instead. I've changed ownership for all files under /etc/raddb and /var/log/radiusd to xxxxrad:xxxxrad, changed user and group in radius.conf accordingly. Also copied the supplied /usr/lib/systemd/system/radiusd.service into /etc/systemd/system/radiusd.service and changed User and Group here too. Running radius -X as root gives no error messages. When starting radius through systemctl start radiusd I get "Failed to start FreeRADIUS multi-protocol policy server." Doing su - xxxxrad and the running radius -X gives these messages: Failed binding to interface net1: Operation not permitted /etc/raddb/sites-enabled/default[59]: Error binding to port for 10.141.8.20 port 1812 I've removed the comment that was in front of the CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETUID CAP_SETGID CAP_CHOWN CAP_DAC_OVERRIDE In radius.service. ./PerW

2 4

EAP TTLS woes
by adrian.p.smith＠bt.com 27 Sep '21

27 Sep '21

I am testing EAP TTLS with Android and finding some mixed results. Using identical WifiConfig on the devices I see an error on some: Thu Sep 23 15:01:12 2021 : Debug: (4808) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4808) eap_ttls: Initiating new EAP-TLS session Thu Sep 23 15:01:12 2021 : Debug: (4808) eap_ttls: [eaptls start] = request Thu Sep 23 15:01:12 2021 : Debug: (4809) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: Authenticate Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: Peer sent flags --- Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: Got final TLS record fragment (131 bytes) Thu Sep 23 15:01:12 2021 : WARNING: (4809) eap_ttls: Total received TLS record fragments (131 bytes), does not equal indicated TLS record length (0 bytes) Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: [eaptls verify] = ok Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: Done initial handshake Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: (other): before/accept initialization Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: before/accept initialization Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: <<< recv TLS 1.1 [length 007e] Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 read client hello A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: >>> send TLS 1.1 [length 0039] Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 write server hello A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: >>> send TLS 1.1 [length 0bc0] Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 write certificate A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: >>> send TLS 1.1 [length 014b] Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 write key exchange A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: >>> send TLS 1.1 [length 0004] Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 write server done A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: SSLv3 flush data Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: In SSL Handshake Phase Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: In SSL Accept mode Thu Sep 23 15:01:12 2021 : Debug: (4809) eap_ttls: [eaptls process] = handled Thu Sep 23 15:01:12 2021 : Debug: (4810) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: Authenticate Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: Peer sent flags --- Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: [eaptls verify] = request Thu Sep 23 15:01:12 2021 : Debug: (4810) eap_ttls: [eaptls process] = handled Thu Sep 23 15:01:12 2021 : Debug: (4811) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: Authenticate Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: Peer sent flags --- Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: [eaptls verify] = request Thu Sep 23 15:01:12 2021 : Debug: (4811) eap_ttls: [eaptls process] = handled Thu Sep 23 15:01:12 2021 : Debug: (4812) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: Authenticate Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: Peer sent flags --- Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: [eaptls verify] = request Thu Sep 23 15:01:12 2021 : Debug: (4812) eap_ttls: [eaptls process] = handled Thu Sep 23 15:01:12 2021 : Debug: (4813) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: Authenticate Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: Peer sent flags --- Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: [eaptls verify] = ok Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: Done initial handshake Thu Sep 23 15:01:12 2021 : Debug: (4813) eap_ttls: <<< recv TLS 1.1 [length 0002] Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: TLS Alert read:fatal:internal error Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: TLS_accept: Failed in SSLv3 read client certificate A Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: Failed in __FUNCTION__ (SSL_read) Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: s3_pkt.c[1275]:error:14094438:SSL routines:SSL3_READ_BYTES:tlsv1 alert internal error Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: s3_pkt.c[992]:error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: System call (I/O) error (-1) Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: TLS receive handshake failed during operation Thu Sep 23 15:01:12 2021 : ERROR: (4813) eap_ttls: [eaptls process] = fail The working device shows this log: Thu Sep 23 15:07:35 2021 : Debug: (4844) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4844) eap_ttls: Initiating new EAP-TLS session Thu Sep 23 15:07:35 2021 : Debug: (4844) eap_ttls: [eaptls start] = request Thu Sep 23 15:07:35 2021 : Debug: (4845) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: Got final TLS record fragment (141 bytes) Thu Sep 23 15:07:35 2021 : WARNING: (4845) eap_ttls: Total received TLS record fragments (141 bytes), does not equal indicated TLS record length (0 bytes) Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: [eaptls verify] = ok Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: Done initial handshake Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: (other): before/accept initialization Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: before/accept initialization Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: <<< recv TLS 1.1 [length 0088] Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 read client hello A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: >>> send TLS 1.1 [length 0039] Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 write server hello A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: >>> send TLS 1.1 [length 0bc0] Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 write certificate A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: >>> send TLS 1.1 [length 014b] Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 write key exchange A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: >>> send TLS 1.1 [length 0004] Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 write server done A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: SSLv3 flush data Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: In SSL Handshake Phase Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: In SSL Accept mode Thu Sep 23 15:07:35 2021 : Debug: (4845) eap_ttls: [eaptls process] = handled Thu Sep 23 15:07:35 2021 : Debug: (4846) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: [eaptls verify] = request Thu Sep 23 15:07:35 2021 : Debug: (4846) eap_ttls: [eaptls process] = handled Thu Sep 23 15:07:35 2021 : Debug: (4847) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: [eaptls verify] = request Thu Sep 23 15:07:35 2021 : Debug: (4847) eap_ttls: [eaptls process] = handled Thu Sep 23 15:07:35 2021 : Debug: (4848) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: Peer ACKed our handshake fragment Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: [eaptls verify] = request Thu Sep 23 15:07:35 2021 : Debug: (4848) eap_ttls: [eaptls process] = handled Thu Sep 23 15:07:35 2021 : Debug: (4849) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: [eaptls verify] = ok Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: Done initial handshake Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: <<< recv TLS 1.1 [length 0046] Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: TLS_accept: SSLv3 read client key exchange A Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: <<< recv TLS 1.1 [length 0001] Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: <<< recv TLS 1.1 [length 0010] Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: TLS_accept: SSLv3 read finished A Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: >>> send TLS 1.1 [length 0001] Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: TLS_accept: SSLv3 write change cipher spec A Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: >>> send TLS 1.1 [length 0010] Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: TLS_accept: SSLv3 write finished A Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: TLS_accept: SSLv3 flush data Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: (other): SSL negotiation finished successfully Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: SSL Connection Established Thu Sep 23 15:07:35 2021 : Debug: (4849) eap_ttls: [eaptls process] = handled Thu Sep 23 15:07:35 2021 : Debug: (4850) eap: Calling submodule eap_ttls to process data Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Authenticate Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Continuing EAP-TLS Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Peer sent flags --- Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: [eaptls verify] = ok Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Done initial handshake Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: [eaptls process] = ok Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Session established. Proceeding to decode tunneled attributes Thu Sep 23 15:07:35 2021 : Debug: (4850) eap_ttls: Got tunneled request Any clues appreciated. Adrian Smith

2 1

RADIUS protocol and password compatibility
by Network RADIUS 24 Sep '21

24 Sep '21

** RADIUS protocol and password compatibility -------------------------------------------- In order for RADIUS authentication to work, user passwords need to be stored in a format that is understood by the authentication protocol used by the client. Unfortunately, not all protocols work with all password storage formats. This can be especially problematic with platforms that use proprietary formats or protocols. Read the full article... https://networkradius.com/articles/2021/08/23/protocols-and-password-compat… <https://networkradius.com/articles/2021/06/09/8-most-common-RADIUS-mistakes…> ** Sign up to get this content directly --------------------------------------------- Want to get these articles in all their HTML glory? Sign up here: http://eepurl.com/hwuWrn <http://eepurl.com/hwuWrn> ** Need RADIUS help? --------------------------------------------- Get commercial support from the team behind FreeRADIUS. https://networkradius.com/contact/ <https://networkradius.com/contact/> ** What is the relationship between Network RADIUS and FreeRADIUS? ---------------------------------------------- FreeRADIUS is an open source implementation of the RADIUS protocol and was written by Alan DeKok in 1999. Network RADIUS is a private, for-profit company founded by Alan DeKok which provides commercial support for FreeRADIUS. The Network RADIUS team has been the primary contributor to FreeRADIUS for the last 20 years. The FreeRADIUS mailing list, wiki, and documentation are all moderated and maintained by the Network RADIUS team. FreeRADIUS has always been, and will always continue to be, open source. The Network RADIUS team provides commercial support to paying clients, and free product development for the FreeRADIUS community at large. All of our software development for FreeRADIUS is integrated into the Open Source platform, and will always continue to be.

1 0