- Freeradius-Users - lists.freeradius.org

Can't autenticate on ldap with PEAP
by Oscar Pacheco 18 Sep '09

18 Sep '09

Hello, we can't authenticate using ldap on eap/mschapv2, the user exists in the ldap database and with the radtest utility sends a ok reply. Here is a part of the debug using the -X option when we try to validate a user using windows xp

2 2

custom module not found
by James Devine 18 Sep '09

18 Sep '09

I have a custom module that I am having problems getting loaded. It works fine on a freebsd machine, I just built 2.1.6 on an ubuntu machine, which appears to put the modules in /usr/local/lib, so I built the custom module and added it to /usr/local/lib and it cannot find it: Fri Sep 18 14:15:30 2009 : Error: /usr/local/etc/raddb/modules/gwis[11]: Failed to link to module 'rlm_gwis': file not found rlm_gwis-2.1.6.so and rlm_gwis.so exist in /usr/local/lib and I have set libdir = /usr/local/lib/ in radiusd.conf, any idea how to find out where it is trying to find that file?

2 1

RE: Lower case to Upper case in Calling-Station-Id at policy.conf
by Ivan Kalik 18 Sep '09

18 Sep '09

> Did you create an alias in modules/perl that uses this script for > authorize? Perl module is configured to run example.pl by default. There is no need to make any changes in raddb/modules/perl. Only if you want to run a different script. Ivan Kalik Kalik Informatika ISP

1 0

using SQL, where is Session-Timeout updated?
by Rakotomandimby Mihamina 18 Sep '09

18 Sep '09

Hi all, Having these _prepaid_ internet access accounts: SELECT * FROM radcheck; +----+----------------+--------------------+------------------+------+ | id | UserName | Attribute | Value | Op | +----+----------------+--------------------+------------------+------+ | 1 | fredf | Cleartext-Password | wilma | := | | 2 | barney | Cleartext-Password | betty | := | +----+----------------+--------------------+------------------+------+ And this: SELECT * FROM radreply; +----+------------+-------------------+---------------------------------+------+ | id | UserName | Attribute | Value | Op | +----+------------+-------------------+---------------------------------+------+ [...] | 2 | barney | Session-Timeout | 500 | := | | 3 | fredf | Session-Timeout | 250 | := | [...] +----+------------+-------------------+---------------------------------+------+ In reality I use PGSQL. Reading the queries in dialup.conf, I dont see any update of radreply in order to decrease the Session-Timeout. As far as I know, Session-Timeout should be decreased the number of seconds the user has been "connected" Where, in the out of the box PGSQL suggested schema is accounting updating this Session-Timeout attribute? Thank you. Using packaged freeradius and postgresql-8.3 on Debian Lenny. -- Architecte Informatique chez Blueline/Gulfsat: Administration Systeme, Recherche & Developpement +261 34 29 155 34

2 7

Version 2.1.7 has been released
by Alan DeKok 18 Sep '09

18 Sep '09

After 4 months, Version 2.1.7 has been released. The focus of this release is stability. There is a lot new in 2.1.7, especially full CoA support! The server can now send, recieve, and proxy CoA packets. We expect that people will start using CoA in their networks, and we are looking for contributions of sample CoA policies. The log messages for authentication success/fail are now partly customizable. Proxying is now a little more robust in some corner cases. A number of bugs have been fixed, too. Alan DeKok. Project Leader --------------------------------------------------- Feature improvements * Full support for CoA and Disconnect packets as per RFC 3576 and RFC 5176. Both receiving and proxying CoA is supported. * Added "src_ipaddr" configuration to "home_server". See proxy.conf for details. * radsniff now accepts -I, to read from a filename instead of a device. * radsniff also prints matching requests and any responses to those requests when '-r' is used. * Added example of attr_filter for Access-Challenge packets * Added support for udpfromto in DHCP code * radmin can now selectively mark modules alive/dead. See "set module state". * Added customizable messages on login success/fail. See msg_goodpass && msg_badpass in log{} section of radiusd.conf * Document "chase_referrals" and "rebind" in raddb/modules/ldap * Preliminary implementation of DHCP relay. * Made thread pool section optional. If it doesn't exist, the server will run single-threaded. * Added sample radrelay.conf for people upgrading from 1.x * Made proxying more stable by failing over, rather than rejecting the first request. See "response_window" in proxy.conf * Allow home_server_pools to exist without realms. * Add dictionary.iea (closes bug #7) * Added support for RFC 5580 * Added experimental sql_freetds module from Gabriel Blanchard. * Updated dictionary.foundry * Added sample configuration for MySQL cluster in raddb/sql/ndb See the README file for explanations. Bug fixes * Fixed corner case where proxied packets could have extra character in User-Password attribute. Fix from Niko Tyni. * Extended size of "attribute" field in SQL to 64. * Fixes to ruby module to be more careful about when it builds. * Updated Perl module "configure" script to check for broken Perl installations. * Fix "status_check = none". It would still send packets in some cases. * Set recursive flag on the proxy mutex, which enables safer cleanup on some platforms. * Copy the EAP username verbatim, rather than escaping it. * Update handling so that robust-proxy-accounting works when all home servers are down for extended periods of time. * Look for DHCP option 53 anywhere in the packet, not just at the start. * Fix processing of proxy fail handler with virtual servers. * DHCP code now prints out correct src/dst IP addresses when sending packets. * Removed requirement for DHCP to have clients * Fixed handling of DHCP packets with message-type buried in the packet * Fixed corner case with negation in unlang. * Minor fixes to default MySQL & PostgreSQL schemas * Suppress MSCHAP complaints in debugging mode. * Fix SQL module for multiple instance, and possible crash on HUP * Fix permissions for radius.log for sites that change user/group, but which don't create the file before starting radiusd. * Fix double counting of packets when proxying * Make %l work * Fix pthread keys in rlm_perl * Log reasons for EAP failure (closes bug #8) * Load home servers and pools that aren't referenced from a realm. * Handle return codes from virtual attributes in "unlang" (e.g. LDAP-Group). This makes "!(expr)" work for them. * Enable VMPS to see contents of virtual server again * Fix WiMAX module to be consistent with examples. (closes bug #10) * Fixed crash with policies dependent on NAS-Port comparisons * Allowed vendor IDs to be be higher than 32767. * Fix crash on startup with certain regexes in "hints" file. * Fix crash in attr_filter module when packets don't exist * Allow detail file reader to be faster when "load_factor = 100" * Add work-around for build failures with errors related to lt__PROGRAM__LTX_preloaded_symbols. * Made ldap module "rebind" option aware of older, incompatible versions of OpenLDAP. * Check value of Fall-Through in attr_filter module.

3 3

automated response
by Olaf Becker 18 Sep '09

18 Sep '09

Dear Sender, Thank you for your email. I will be out of the office until 10/05/2009. For help with general issues, please contact our Data Center Team in Frankfurt am Main Germany. Regards, Olaf Becker Teamleader IT Security & Network Celebrating 20 Years of Hotel Distribution Excellence Trust International Hotel Reservation Services Inc 1155 South Semoran Blvd. Suite 1129 Winter Park, FL 32792 http://www.trustinternational.com Place of business: Frankfurt am Main, Germany Register Information: AG Frankfurt am Main HRB 30120 Managing Directors: Richard Wiegmann TRUST International Latest Reservation and Distribution Technology for Your Success Please see our disclaimer via link http://www.trustinternational.com/tr/emailattachmentpolicy.htm

1 0

Freeradius-2.0.5 and Vista SP2
by M.K. tenNapel 18 Sep '09

18 Sep '09

Hi, I have protected my wireless network with Freeradius-2.0.5, running on my Gentoo server. All the clients have to authenticate themselves with an SSL-certificate, before access to the wireless network is granted. This has always worked fine for Linux (Ubuntu 9.0.4) windows-XP (SP3) and windows-Vista (SP1) However, since I upgraded 2 Vista laptops to SP2, they won't connect to my wirelessnetwork anymore. This is what Freeradius in debug-mode says: Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.123 port 2049, id=2, length=133 User-Name = "Pietje Puk" NAS-IP-Address = 192.168.1.123 Called-Station-Id = "00226b8676fb" Calling-Station-Id = "00215c2dd5ef" NAS-Identifier = "00226b8676fb" NAS-Port = 23 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000f014e656c6c79204f6f7374 Message-Authenticator = 0x3ef0b2f9fac3b12b6476a230651a27f2 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "Pietje Puk", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 0 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry Pietje Puk at line 18 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.1.123 port 2049 EAP-Message = 0x010100060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2ef5a31f2ef4aea21b4d93bd7a29a8b3 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.123 port 2049, id=2, length=142 Cleaning up request 0 ID 2 with timestamp +17 User-Name = "Pietje Puk" NAS-IP-Address = 192.168.1.123 Called-Station-Id = "00226b8676fb" Calling-Station-Id = "00215c2dd5ef" NAS-Identifier = "00226b8676fb" NAS-Port = 23 Framed-MTU = 1400 State = 0x2ef5a31f2ef4aea21b4d93bd7a29a8b3 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100060319 Message-Authenticator = 0x9840aa9e1d5478eb7e05a8184aad0e91 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "Pietje Puk", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 1 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry Pietje Puk at line 18 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: NAK asked for unsupported type 25 rlm_eap: No common EAP types found. rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Login incorrect: [Pietje Puk/<via Auth-Type = EAP>] (from client AP_Radius_Beneden port 23 cli 00215c2dd5ef) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> Pietje Puk attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Sending Access-Reject of id 2 to 192.168.1.123 port 2049 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 1. Going to the next request Waking up in 4.9 seconds. Cleaning up request 1 ID 2 with timestamp +17 Ready to process requests. I suppose this is where it goes wrong: rlm_eap: No common EAP types found. rlm_eap: Failed in EAP select etc Does someone else have trouble with Vista SP2? Or am I the only one? Perhaps someone knows how to fix this? Kind regards, Marinus

2 1

Authentication with eap/mschapv2
by Stefan Hotz 18 Sep '09

18 Sep '09

Hello I would like to authenticate my Windows XP wireless users with freeradius against a AD. Test with the local ntlm_auth against the AD worked fine as well radtest with a local user in the users file. It seems to me that Problem ist somewhere here: Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 rlm_eap_mschapv2: Invalid response type 4 [eap] Handler failed in EAP/mschapv2 [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. I have read in the archive that "Code 4 is MS-CHAP failure. It means that the client told the server it didn't like the previous packet" But I have no idea what the server does not like. The whole debug output is below Any help it greatliy appreciated regards stefan FreeRADIUS Version 2.1.0, for host i486-pc-linux-gnu, built on Sep 2 2009 at 13:59:26 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy..conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel group = freerad user = freerad including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127..0.0.1 require_message_authenticator = no secret = "testing123-1" shortname = "localhost" nastype = "other" } client 10.0.0.1 { require_message_authenticator = no secret = "testing123-1" shortname = "wireless" nastype = "others" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = no require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-mydomain:-mydomain} --username=%{mschap:User-Name:-None} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/demoCA/nzzwire01-0.key" certificate_file = "/etc/freeradius/certs/demoCA/nzzwire01-0.crt" CA_file = "/etc/freeradius/certs/demoCA/CA_cert.crt" private_key_password = "WireKey*!4" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {....} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=104, length=145 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0xa1f051e8488f5a50cb044187a8c4c674 EAP-Message = 0x02010010015a4830315c532e486f747a NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 104 to 10.0.0.1 port 1645 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e80eb716d23cf4280d3865bd8 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=105, length=253 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0x8ea63d676026bf116dc956f454e8088e EAP-Message = 0x0202006a1900160301005f0100005b03014ab1f239fed58a9540ea7eeff0e2d184bfde52a76c671ae71e9ecf769581c7ff00003400390038003500160013000a00330032002f006600050004006500640063006200610060001500120009001400110008000600030100 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e80eb716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 106 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005f], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 05ce], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 010d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 105 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x13027a68310f300d06035504 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e81ea716d23cf4280d3865bd8 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=106, length=153 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0x918316a7a500e443230e4bbc47d5ad7d EAP-Message = 0x020300061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e81ea716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {....} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 106 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1fee35da981a6e3f4939e5c3e0187867094c41b1e6bf6da839f737f42dfefea18aa18718509de0791f15edde5316030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e82ed716d23cf4280d3865bd8 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=107, length=287 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0xf6e713150b71eaf618f12fde46e3bcbb EAP-Message = 0x0204008c190016030100461000004200401c3ab7dc1a753b6ae3020d96d1d144cadf21b5f3422a6783f77bc954b33441514b12044ddacd7ca955d4e1c23c8fc697df9f9e4cdd9361aca2ed8f9ac3f1e04314030100010116030100309180e1b3bc25f45e673fbe76685a95ecc6440b1b0309c47624f75142ae6c9ada63fa12674301b56444c21b450c6b32e7 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e82ed716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 140 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 107 to 10.0.0.1 port 1645 EAP-Message = 0x010500411900140301000101160301003020196b841f13a063342315f0272e8781d4be5a2e7147e5bdbbfbdc21aeef3d4ea2affdacf672abbd8534b15150719e00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e83ec716d23cf4280d3865bd8 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=108, length=153 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0x4e257a44e0eb615236e7e6132d5d661f EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e83ec716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 108 to 10.0.0.1 port 1645 EAP-Message = 0x0106002b190017030100204ac0995a7016dc6e2823fe58aa1a8ff6714e685167aa9168e2a18516a34ce6d6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e84ef716d23cf4280d3865bd8 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=109, length=243 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0xa1c6ce6def0c9de02466b5c65e1cf9c3 EAP-Message = 0x0206006019001703010020d89c686f3a414d7446d857dee8506108223b5dc794ab421d80fb05f03f0a2bd21703010030de672b9ad28edfa510afb0379d769393b37e8de8f1cc4e4f7e9153bc4b7c4b9ccae6f4b26cc5a1bf7fcdc31537a79ea0 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e84ef716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - mydomain\user [peap] Got tunnled request EAP-Message = 0x02060010017a6830315c732e686f747a server (null) { PEAP: Got tunneled identity of mydomain\user PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to mydomain\user Sending tunneled request EAP-Message = 0x02060010017a6830315c732e686f747a FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 6 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010700251a0107002010c508956d066adc8e3bc9b92127fb2fe27a6830315c732e686f747a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03371cd203300629664a8ed6dcdcbe2d [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010700251a0107002010c508956d066adc8e3bc9b92127fb2fe27a6830315c732e686f747a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03371cd203300629664a8ed6dcdcbe2d [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 109 to 10.0.0.1 port 1645 EAP-Message = 0x0107004b19001703010040fd04cc1b4a2605a649d63355aabdeb2632f6f349527cb4013d00d87573592aab6137e23b1f600379195c551950397cce371207f6be612863a7984b38637b9992 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e85ee716d23cf4280d3865bd8 Finished request 5. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=110, length=291 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0x1cd29e39402a6e840e8f6556bf46928e EAP-Message = 0x0207009019001703010020bd76d0b1af16c027e5a9da101b14ee7fe6ff2cf97814650047851242be007a711703010060c32b500bc499db805ab72b291f00d4005f04d993d16bb7061e2d52b47c7d9556b3c7c11b69878df2bb9d162d0785d085987181a73a81d9315139e4662efa7b54369921d174a6047bb7746897a46c93a795a8ebc3c4856481f9e1323ad8bcbdb5 NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e85ee716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020700461a0207004131f57076f6190b1451606d6ed9d3c3b80f0000000000000000758dee0f5cf4b7ea3cd150fa32ff165723887bae940074c4007a6830315c732e686f747a server (null) { PEAP: Setting User-Name to mydomain\user Sending tunneled request EAP-Message = 0x020700461a0207004131f57076f6190b1451606d6ed9d3c3b80f0000000000000000758dee0f5cf4b7ea3cd150fa32ff165723887bae940074c4007a6830315c732e686f747a FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "mydomain\\user" State = 0x03371cd203300629664a8ed6dcdcbe2d Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560..3e95" Service-Type = Login-User NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 70 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for user with NT-Password expand: --domain=%{mschap:NT-mydomain:-mydomain} -> --domain=mydomain expand: --username=%{mschap:User-Name:-None} -> --username=user [mschap] mschap2: c5 expand: --challenge=%{mschap:Challenge:-00} -> --challenge=8660dea0f174464c expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=758dee0f5cf4b7ea3cd150fa32ff165723887bae940074c4 Exec-Program output: NT_KEY: B9C1923227672CF3D5079723D78E41A0 Exec-Program-Wait: plaintext: NT_KEY: B9C1923227672CF3D5079723D78E41A0 Exec-Program: returned: 0 ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010800331a0307002e533d32423538443738374433374635314433313846413736343432333539463034384645433535353044 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03371cd2023f0629664a8ed6dcdcbe2d [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010800331a0307002e533d32423538443738374433374635314433313846413736343432333539463034384645433535353044 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x03371cd2023f0629664a8ed6dcdcbe2d [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 110 to 10.0.0.1 port 1645 EAP-Message = 0x0108005b1900170301005055895bdec32accf23e83a028b4dacbd15c004660b5f7894904db99814756478b5e75b0d7784be8499937b31e7b49ac566dea2f9ffcfec48f52c6187290e8531f7f1f1227f27d7b589aea4033a7d24ea9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e86e1716d23cf4280d3865bd8 Finished request 6. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10..0.0.1 port 1645, id=111, length=227 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0xca25c9fefffe68fb16b7540330f886cd EAP-Message = 0x0208005019001703010020218fcc3ddf31542a1f4561375cb7b54f876cad08360a35bbee7cffcc512cd1a1170301002029173c496b16779ef3bb3d5172702d36c240bd8357def389fac4eb3212046f6e NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e86e1716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020800061a04 server (null) { PEAP: Setting User-Name to mydomain\user Sending tunneled request EAP-Message = 0x020800061a04 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "mydomain\\user" State = 0x03371cd2023f0629664a8ed6dcdcbe2d Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {....} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 rlm_eap_mschapv2: Invalid response type 4 [eap] Handler failed in EAP/mschapv2 [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 111 to 10.0.0.1 port 1645 EAP-Message = 0x0109002b19001703010020b12908003d5c6d7d90cd3130cf111d70753d81ca7757744970195793cf356978 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x80e9682e87e0716d23cf4280d3865bd8 Finished request 7. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=112, length=227 User-Name = "mydomain\\user" Framed-MTU = 1400 Called-Station-Id = "000d.2868.4801" Calling-Station-Id = "000e.3560.3e95" Service-Type = Login-User Message-Authenticator = 0x508935028611f6b0a47361317bf28b8f EAP-Message = 0x02090050190017030100203ce39908b6bbd121e3b74f1b47e4df5e0a3b29c6bad8add51bdfad7e96ecb35917030100208618b9c909461c0afd54c4187f4fc76076ec42ed2d702e7cdd3e3099dc3b0f6b NAS-Port-Type = Wireless-802.11 NAS-Port = 4392 State = 0x80e9682e87e0716d23cf4280d3865bd8 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "wireless" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "mydomain\user", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} expand: %{User-Name} -> mydomain\user attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 112 to 10.0.0.1 port 1645 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.4 seconds.

4 8

disc-cause-ext number to string
by Igor Smitran 18 Sep '09

18 Sep '09

I am having problems with one NAS, Cisco 3620. It keeps sending me AVPairs that contain only number values, not string. Example: Cisco-AVPair = disc-cause-ext=1045 According to this: http://www.cisco.com/en/US/docs/ios/internetwrk_solutions_guides/splob/guid… 1045 = Received Terminate On that same radius i have few other Cisco NAS-es that send AVPairs with string value. Is there a way to translate this number to string value in a dictionary? I am sorry if this subject was mentioned before. I've spent one hour searching but no success, maybe my search keywords were wrong. Any guidance would be appreciated.

2 1

Authenticating Windows Variants (2003, XP and 2000) clients and linux boxes using freeradius
by Bipin Tigga 18 Sep '09

18 Sep '09

Hello, I am just planning to deploy free radius on a linux box having LDAP, openssl. I have two queries: * Is it possible to authenticate Windows Variants (2003,XP and 2000) clients without using Windows 2003 AD? * And how much I can scale (my requirement might go upto 250 boxes in future) ? Thanks In Advance, Bipin

2 1