- Freeradius-Users - lists.freeradius.org

usename + password + MAC address
by Rakotomandimby Mihamina 11 Sep '09

11 Sep '09

Hi all, On a Radius version 2.x, we would like to tie an user to a MAC address. The auth key would then be the username, password and MAC address (Calling Station ID). Where is the right place to do that? - On the freeRadius? (any hint, please?) - In the PGSQL behind? (using some FUNCTION, I have an idea of that) Thank you. -- Architecte Informatique chez Blueline/Gulfsat: Administration Systeme, Recherche & Developpement +261 34 29 155 34

3 3

Start delayed due to MySQL server failure
by Asin 11 Sep '09

11 Sep '09

Hi All, I have freeradius 2.1.1. It is configured to do accounting to MySQL server. At the time of starting the radius server if the MySQL server is not reachable the freeradius server waits for about 3 minutes before starting in the debug mode. This is too much time. Is there a way to overcome this delay? Thanks Asin

1 0

Freeradius 1.X.X and LDAP groups.
by Michael March 10 Sep '09

10 Sep '09

The scoop is I'm using Freeradius 1.1.3 under RHEL/Centos 5.2 and I'm trying to get authentication working so FreeRadius will authenticate a user OLNY if they are in a certain LDAP group.. In this case that group is called 'it'. Where I am at now is if the user is in or out of the 'it' group the authentication goes through ok (depending if the password is correct, of course). I would like the authenication to fail if the password is correct BUT the user is not in a certain ('it') group. Here are my configs snippets: ========= /etc/raddb/users =========== DEFAULT Auth-Type = LDAP Fall-Through = 1 DEFAULT LDAP-Group == it Service-Type = Administrative-User ========= /etc/raddb/radiusd.conf =========== ldap { server = "192.168.150.140" identity = "uid=admin,ou=People,dc=acme,dc=com" password = "BadPass" basedn = "dc=acme,dc=com" filter = "(uid=%u)" # base_filter = "(objectclass=radiusprofile)" start_tls = no # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" # profile_attribute = "radiusProfileDn" access_attr = uid # Mapping of RADIUS dictionary attributes to LDAP # directory attributes. dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 groupname_attribute = cn groupmembership_filter = "(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))" groupmembership_attribute = it timeout = 4 timelimit = 3 net_timeout = 1 compare_check_items = yes # do_xlat = yes access_attr_used_for_allow = yes } ====== Output when user is OUT of the 'it' group ====== rad_recv: Access-Request packet from host 127.0.0.1:32770, id=213, length=59 User-Name = "vpntest" User-Password = "ChangeMeToo" NAS-IP-Address = 255.255.255.255 NAS-Port = 10 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "vpntest", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 152 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'dc=acme,dc=com' radius_xlat: '(uid=vpntest)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acme,dc=com, with filter (uid=vpntest) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(&(objectClass=GroupOfNames)(member=uid\3dvpntest\2cou\3dPeople\2cdc\3dacme\2cdc\3dcom))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acme,dc=com, with filter (&(cn=it)(&(objectClass=GroupOfNames)(member=uid\3dvpntest\2cou\3dPeople\2cdc\3dacme\2cdc\3dcom))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in uid=vpntest,ou=People,dc=acme,dc=com, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: ldap_get_values() failed rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns ok) for request 1 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 1 rlm_ldap: - authenticate rlm_ldap: login attempt by "vpntest" with password "ChangeMeToo" rlm_ldap: user DN: uid=vpntest,ou=People,dc=acme,dc=com rlm_ldap: (re)connect to 192.168.150.140:389, authentication 1 rlm_ldap: bind as uid=vpntest,ou=People,dc=acme,dc=com/ChangeMeToo to 192.168.150.140:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user vpntest authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 1 modcall: leaving group LDAP (returns ok) for request 1 Sending Access-Accept of id 213 to 127.0.0.1 port 32770 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 213 with timestamp 4aa7438c Nothing to do. Sleeping until we see a request. ====== Output when user is IN of the 'it' group ====== rad_recv: Access-Request packet from host 127.0.0.1:32770, id=220, length=59 User-Name = "vpntest" User-Password = "ChangeMeToo" NAS-IP-Address = 255.255.255.255 NAS-Port = 10 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "vpntest", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 users: Matched entry DEFAULT at line 152 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'dc=acme,dc=com' radius_xlat: '(uid=vpntest)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acme,dc=com, with filter (uid=vpntest) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(&(objectClass=GroupOfNames)(member=uid\3dvpntest\2cou\3dPeople\2cdc\3dacme\2cdc\3dcom))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=acme,dc=com, with filter (&(cn=it)(&(objectClass=GroupOfNames)(member=uid\3dvpntest\2cou\3dPeople\2cdc\3dacme\2cdc\3dcom))) rlm_ldap::ldap_groupcmp: User found in group it rlm_ldap: ldap_release_conn: Release Id: 0 users: Matched entry DEFAULT at line 155 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns ok) for request 2 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 2 rlm_ldap: - authenticate rlm_ldap: login attempt by "vpntest" with password "ChangeMeToo" rlm_ldap: user DN: uid=vpntest,ou=People,dc=acme,dc=com rlm_ldap: (re)connect to 192.168.150.140:389, authentication 1 rlm_ldap: bind as uid=vpntest,ou=People,dc=acme,dc=com/ChangeMeToo to 192.168.150.140:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user vpntest authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 2 modcall: leaving group LDAP (returns ok) for request 2 Sending Access-Accept of id 220 to 127.0.0.1 port 32770 Service-Type = Administrative-User Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 220 with timestamp 4aa743f8 Nothing to do. Sleeping until we see a request.

5 6

Pre release of 2.1.7
by Alan DeKok 10 Sep '09

10 Sep '09

Unless anyone complains, the code on git.freeradius.org/pre/ will become 2.1.7 on Monday. There are minor additions from the last time people took a look at it, but nothing serious. Alan DeKok.

1 0

FreeRadius is 3 time quicker when running in full debug mode ( -X option)
by Vincent Laborie 10 Sep '09

10 Sep '09

Dear Freeradius User list, I am surprised by the fact that freeRadius (Version 2.0.4) is 3 time quicker when running in full debug mode ( -X option). When running freeradius I full debug mode /usr/sbin/freeradius –X I have good response time from remote client were between 200 and 210 ms. But when I launched freeradius without debugging (with exact same configuration): /usr/sbin/freeradius Or /etc/init.d/freeradius start the response time increase to 600ms It is usually the opposite where turning off debugging should increase response speed . Does any body have an explanation? Or any clue to improve performance on non debug Mode ? Thanks in advance for your support. Vincent

7 13

Start delayed due to MySQL server failure
by Asin 10 Sep '09

10 Sep '09

Hi All, I have freeradius 2.1.1. It is configured to do accounting to MySQL server. At the time of starting the radius server if the MySQL server is not reachable the freeradius server waits for about 3 minutes before starting in the debug mode. This is too much time. Is there a way to overcome this delay? Thanks Asin

1 0

EAP-TTLS with mschapv2 and edirectory
by Michael Fischer 10 Sep '09

10 Sep '09

Hi, I'm trying to set up 802.1x authentication on my Enterasys AccessPoints using freeradius and eDirectory. Freeradius and eDirectory work like a charm when I use it for Cisco-VPN authentication. This is the debug-output: rad_recv: Access-Request packet from host 10.3.4.10:1088, id=153, length=131 Message-Authenticator = 0x9243250f00d4eaf9edcbe955c5106fe5 User-Name = "dfuernsin" NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" EAP-Message = 0x0201000e0164667565726e73696e Framed-MTU = 1000 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/rootder.b64 rlm_ldap: starting TLS rlm_ldap: bind as cn=admin,o=TGM/xxxxxxx to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Sending Access-Challenge of id 153 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc467576a8938958c1a53a68b8e75ff64 rad_recv: Access-Request packet from host 10.3.4.10:1088, id=154, length=141 Message-Authenticator = 0x0967d369610e907bd46340a8497b3cd1 User-Name = "dfuernsin" State = 0xc467576a8938958c1a53a68b8e75ff64 NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x020200060315 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Sending Access-Challenge of id 154 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc2b5e7347d4362c9837a8cdb5ae54cef rad_recv: Access-Request packet from host 10.3.4.10:1088, id=155, length=241 Message-Authenticator = 0xd03ac83eb22acb6875c887c94c819f4e User-Name = "dfuernsin" State = 0xc2b5e7347d4362c9837a8cdb5ae54cef NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x0203006a1500160301005f0100005b03014aa65ba4b109ea3853a601da56bcfb3503d5da3b5141d5ae1d46dc029a00009b00003400390038003500160013000a00330032002f006600050004006500640063006200610060001500120009001400110008000600030100 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) Sending Access-Challenge of id 155 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x38765b36ad92c6726e697e9232aa61aa3ee705521ccb59b91dbcf4475df14af87342965b0c58fe6dd3d8750193a4a91e964029b0ba452ee46d3be0a1d8af0003c3308203bf30820328a00302010202090090e75d8098036885300d06092a864886f70d010105050030819c310b3009060355040613024154310f300d060355040813065669656e6e61310f300d060355040713065669656e6e6131253023060355040a131c54474d202d2044696520536368756c652064657220546563686e696b310d300b060355040b130472616431311730150603550403130e54474d20436c69656e742053534c311c301a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x72e9a4df87e4335cee24c2dbc1c9dde3 rad_recv: Access-Request packet from host 10.3.4.10:1088, id=156, length=141 Message-Authenticator = 0xea43378afe10a29865cc0b2c502015c4 User-Name = "dfuernsin" State = 0x72e9a4df87e4335cee24c2dbc1c9dde3 NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x020400061500 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Sending Access-Challenge of id 156 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x950c0b8bd8f07773e654c74153aa54c20bfe9c0ec6c4330b00267c19cb777433bfabf26680f70f881972160301010d0c0001090040b0e40717d408c7bd95e486445a58ca90105eeb618a3cb101fedfa1f30852a72fb8585db5f4876611a2bdb3114e7806a3499aa7ab9fdaecd98b24b49dd737c7730001020040188269e7cb45c48d98c9afaf784b98f4097dc6cbacf7317ce7e57bc2dacae876e0a5d27d2accd4f5240e2228b99397b4d5cb25420942cbbdfc51b4e644cd3111008061c8942076db0af63f340a6e3658f5e512fcf58f5e087ef2f0619b78c225311d16046e6a769f383c23baadd1c35251c5b3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9c3953fde1abb5c5aebec8ebfc86a1bb rad_recv: Access-Request packet from host 10.3.4.10:1088, id=157, length=141 Message-Authenticator = 0x3d7ea6f61b767389629d49596205cbd9 User-Name = "dfuernsin" State = 0x9c3953fde1abb5c5aebec8ebfc86a1bb NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x020500061500 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Sending Access-Challenge of id 157 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 0x0106006215800000080c4735a6c865221013a00e96f493261b33521a8a8db63b2eeaa24bbd1fbbfc067771b65a0811beec00e57b7699eda4802ca8e81aabeca2dad6fd539cc217fb20f99d55eeb228d6da1110ae9c86e2f2f216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5661a0f5ce45e239b4bc70859f6a2bf9 rad_recv: Access-Request packet from host 10.3.4.10:1088, id=158, length=275 Message-Authenticator = 0x1b944ca85d6a4c92fa947f1637831748 User-Name = "dfuernsin" State = 0x5661a0f5ce45e239b4bc70859f6a2bf9 NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x0206008c150016030100461000004200403239103fe96393b4442f69821e1784ab56e448c25d9a02d3b76fd0201fc53bdf165556558f1539d40400185a164646a89aba0412c2e205ca7828ce2ba98b5aa114030100010116030100308b32065275900efdd52cf6124e1f032aca7d1f771bf611b925590b7412b935621bbd62f33a4bc4b97ee483a5a62e8dca rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) Sending Access-Challenge of id 158 to 10.3.4.10 port 1088 Class = 0x54474d2d495453 EAP-Message = 0x0107004515800000003b140301000101160301003040dc94e72be53bf55ddf8e541c965363d17b6a5afcd21214d85ead7b55840e0c48e144c6967f3431d935d8ea893dd23f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x37827b68d6e2834e52f9b31f421d6b57 rad_recv: Access-Request packet from host 10.3.4.10:1088, id=159, length=327 Message-Authenticator = 0xeaeace0d6f9aaa5a9b076145efdf883e User-Name = "dfuernsin" State = 0x37827b68d6e2834e52f9b31f421d6b57 NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 EAP-Message = 0x020700c015001703010020509e2651521db9d8f55ea9236544febdd1847d3d90824b31e7e4b065cce3be5f1703010090cd17c1519d0a3444677865909a065f47f58b4a429faa437acaefd64fcde712221684a961867da9ca7c65ac67c87a736bbd2ec83b4fa5620def3c9956dc47c89f0ba1cfc1119b276190b960dcc5feb1ab8ef37f84bfa605f215956585e7235faf28e1a5693cd43753121cebfbe74f628a8085c0844def4a1031da34e452d3cec56bf86dfdd77790388a97af5de4b1af82 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. TTLS: Got tunneled request User-Name = "dfuernsin" MS-CHAP-Challenge = 0x45343e241414cc6e2b419a80ca3c0679 MS-CHAP2-Response = 0xf90021c10a7e8786f207105e79fcf645fcea00000000000000000e9d76ed745951eb086371741cc54c64e7ec7e2ac6a29979 FreeRADIUS-Proxied-To = 127.0.0.1 TTLS: Sending tunneled request User-Name = "dfuernsin" MS-CHAP-Challenge = 0x45343e241414cc6e2b419a80ca3c0679 MS-CHAP2-Response = 0xf90021c10a7e8786f207105e79fcf645fcea00000000000000000e9d76ed745951eb086371741cc54c64e7ec7e2ac6a29979 FreeRADIUS-Proxied-To = 127.0.0.1 NAS-IP-Address = 10.3.4.10 NAS-Port = 2 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00-1D-E0-64-67-4B" Called-Station-Id = "00-01-F4-1C-9B-89:TGM" Framed-MTU = 1000 rlm_ldap: - authorize rlm_ldap: performing user authorization for dfuernsin rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: Error reading Universal Password.Return Code = -1635 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusClass as Class, value TGM-ITS & op=11 rlm_ldap: user dfuernsin authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Login incorrect: [dfuernsin] (from client localhost port 2 cli 00-1D-E0-64-67-4B) TTLS: Got tunneled reply RADIUS code 3 Class = 0x54474d2d495453 MS-CHAP-Error = "\371E=691 R=1" Login incorrect: [dfuernsin] (from client management port 2 cli 00-1D-E0-64-67-4B) And here is my config: ldap { server = "localhost" identity = "cn=admin,o=TGM" password = xxxxxxx basedn = "o=TGM" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=tgmPerson)" # set this to 'yes' to use TLS encrypted connections # to the LDAP database by using the StartTLS extended # operation. # The StartTLS operation is supposed to be used with normal # ldap connections instead of using ldaps (port 689) connections start_tls = yes tls_cacertfile = /etc/raddb/certs/rootder.b64 # tls_cacertdir = /path/to/ca/dir/ # tls_certfile = /path/to/radius.crt # tls_keyfile = /path/to/radius.key # tls_randfile = /path/to/rnd # tls_require_cert = "demand" # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" profile_attribute = "radiusProfileDn" # access_attr = "dialupAccess" # Mapping of RADIUS dictionary attributes to LDAP # directory attributes. dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 # # NOTICE: The password_header directive is NOT case insensitive # # password_header = "{clear}" # # Set: password_attribute = nspmPassword # # to get the user's password from a Novell eDirectory # backend. This will work *only if* freeRADIUS is # configured to build with --with-edir option. # # # The server can usually figure this out on its own, and pull # the correct User-Password or NT-Password from the database. # # Note that NT-Passwords MUST be stored as a 32-digit hex # string, and MUST start off with "0x", such as: # # 0x000102030405060708090a0b0c0d0e0f # # Without the leading "0x", NT-Passwords will not work. # This goes for NT-Passwords stored in SQL, too. # # password_attribute = userPassword # # Un-comment the following to disable Novell eDirectory account # policy check and intruder detection. This will work *only if* # FreeRADIUS is configured to build with --with-edir option. # edir_account_policy_check=yes # # groupname_attribute = cn # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member= %{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember= %{Ldap-UserDn})))" # groupmembership_attribute = radiusGroupName timeout = 4 timelimit = 3 net_timeout = 1 # compare_check_items = yes # do_xlat = yes # access_attr_used_for_allow = yes # # By default, if the packet contains a User-Password, # and no other module is configured to handle the # authentication, the LDAP module sets itself to do # LDAP bind for authentication. # # You can disable this behavior by setting the following # configuration entry to "no". # # allowed values: {no, yes} # set_auth_type = yes } Can somebody help me? Thanks, Mike -- Please stop top-quoting! email: michi.fischer(a)gmx.net

5 11

Overriding proxy response
by John Morrissey 10 Sep '09

10 Sep '09

I would like to override failed (rejected, timed out) proxy responses with local authentication data. IOW, if the proxy request fails, I want to process the request locally. It looks like the proxy reply trumps local authorization/authentication, and I can't find a way to override the proxy's response code. %REQUEST_PROXY_REPLY in rlm_perl doesn't contain the response code. If this was the opposite way (don't proxy for accounts that exist locally), it seems I could remove Proxy-To-Realm to prevent proxying. Is there a way to do the opposite (perform proxying and override the proxy's response with local auth)? john -- John Morrissey _o /\ ---- __o jwm(a)horde.net _-< \_ / \ ---- < \, www.horde.net/ __(_)/_(_)________/ \_______(_) /_(_)__

4 4

TR: intel Proset/wireless -> OK // windows zero config -> KO (2/2)
by Jaulin Bernard 10 Sep '09

10 Sep '09

This second log (attach file) with an IBM Thinkpad and ThinkVantage tool, connexion was successful. Any idea ? Thanks. Bernard.

1 0

Re: Howto Authenticate Undefined Users
by Matthias Cramer 09 Sep '09

09 Sep '09

Ivan Kalik wrote: >> That sounds nice. But he still needs some attributes and the NAS has to >> think that he is authenticated... > > Then you should have a NAS with fascility to place unauthenticated users > into a guest VLAN. And you don't need a captive portal. I explain a little bit more what I like to do ... I have a Cisco LNS which terminates L2TP Tunnels. This cisco makes the Radius request to my freeradius. Normal Users get authenticated normaly, get Static or dynamic ip's and so on. User not in the sql database should get assigned a vrf group and a ip pool for assigning ip's (I know how to do that with Cisco-AVPairs). This vrf has a default route to a linux box doing some magic stuff with iptables and apache (not done jet). Hope that clears up some things. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iWay AG Phone +41 43 500 1111 Josefstrasse 225 Fax +41 44 271 3535 CH-8005 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 2